EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support

Knights Landing is the next generation architecture for HPC market.

KNL introduces concept of a tile and CHA - Cache/Home Agent for memory
accesses.

Some things are fixed in KNL:
() There's single DIMM slot per channel
() There's 2 memory controllers with 3 channels each, however,
   from EDAC standpoint, it is presented as single memory controller
   with 6 channels. In order to represent 2 MCs w/ 3 CH, it would
   require major redesign of EDAC core driver.

Basically, two functionalities are added/extended:
() during driver initialization KNL topology is being recognized, i.e.
   which channels are populated with what DIMM sizes
   (knl_get_dimm_capacity function)
() handle MCE errors - channel swizzling
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-5-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>

drivers/edac/sb_edac.c

@@ -65,6 +65,14 @@ static const u32 ibridge_dram_rule[] = {
 	0xd8, 0xe0, 0xe8, 0xf0, 0xf8,
 };
 
+static const u32 knl_dram_rule[] = {
+	0x60, 0x68, 0x70, 0x78, 0x80, /* 0-4 */
+	0x88, 0x90, 0x98, 0xa0, 0xa8, /* 5-9 */
+	0xb0, 0xb8, 0xc0, 0xc8, 0xd0, /* 10-14 */
+	0xd8, 0xe0, 0xe8, 0xf0, 0xf8, /* 15-19 */
+	0x100, 0x108, 0x110, 0x118,   /* 20-23 */
+};
+
 #define DRAM_RULE_ENABLE(reg)	GET_BITFIELD(reg, 0,  0)
 #define A7MODE(reg)		GET_BITFIELD(reg, 26, 26)
 
@@ -94,6 +102,14 @@ static const u32 ibridge_interleave_list[] = {
 	0xdc, 0xe4, 0xec, 0xf4, 0xfc,
 };
 
+static const u32 knl_interleave_list[] = {
+	0x64, 0x6c, 0x74, 0x7c, 0x84, /* 0-4 */
+	0x8c, 0x94, 0x9c, 0xa4, 0xac, /* 5-9 */
+	0xb4, 0xbc, 0xc4, 0xcc, 0xd4, /* 10-14 */
+	0xdc, 0xe4, 0xec, 0xf4, 0xfc, /* 15-19 */
+	0x104, 0x10c, 0x114, 0x11c,   /* 20-23 */
+};
+
 struct interleave_pkg {
 	unsigned char start;
 	unsigned char end;
@@ -131,10 +147,13 @@ static inline int sad_pkg(const struct interleave_pkg *table, u32 reg,
 /* Devices 12 Function 7 */
 
 #define TOLM		0x80
-#define	TOHM		0x84
+#define TOHM		0x84
 #define HASWELL_TOLM	0xd0
 #define HASWELL_TOHM_0	0xd4
 #define HASWELL_TOHM_1	0xd8
+#define KNL_TOLM	0xd0
+#define KNL_TOHM_0	0xd4
+#define KNL_TOHM_1	0xd8
 
 #define GET_TOLM(reg)		((GET_BITFIELD(reg, 0,  3) << 28) | 0x3ffffff)
 #define GET_TOHM(reg)		((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff)
@@ -145,6 +164,8 @@ static inline int sad_pkg(const struct interleave_pkg *table, u32 reg,
 
 #define SOURCE_ID(reg)		GET_BITFIELD(reg, 9, 11)
 
+#define SOURCE_ID_KNL(reg)	GET_BITFIELD(reg, 12, 14)
+
 #define SAD_CONTROL	0xf4
 
 /* Device 14 function 0 */
@@ -167,6 +188,7 @@ static const u32 tad_dram_rule[] = {
 /* Device 15, function 0 */
 
 #define MCMTR			0x7c
+#define KNL_MCMTR		0x624
 
 #define IS_ECC_ENABLED(mcmtr)		GET_BITFIELD(mcmtr, 2, 2)
 #define IS_LOCKSTEP_ENABLED(mcmtr)	GET_BITFIELD(mcmtr, 1, 1)
@@ -183,6 +205,8 @@ static const int mtr_regs[] = {
 	0x80, 0x84, 0x88,
 };
 
+static const int knl_mtr_reg = 0xb60;
+
 #define RANK_DISABLE(mtr)		GET_BITFIELD(mtr, 16, 19)
 #define IS_DIMM_PRESENT(mtr)		GET_BITFIELD(mtr, 14, 14)
 #define RANK_CNT_BITS(mtr)		GET_BITFIELD(mtr, 12, 13)
@@ -253,6 +277,9 @@ static const u32 correrrthrsld[] = {
 
 #define NUM_CHANNELS		8	/* 2MC per socket, four chan per MC */
 #define MAX_DIMMS		3	/* Max DIMMS per channel */
+#define KNL_MAX_CHAS		38	/* KNL max num. of Cache Home Agents */
+#define KNL_MAX_CHANNELS	6	/* KNL max num. of PCI channels */
+#define KNL_MAX_EDCS		8	/* Embedded DRAM controllers */
 #define CHANNEL_UNSPECIFIED	0xf	/* Intel IA32 SDM 15-14 */
 
 enum type {
@@ -260,6 +287,7 @@ enum type {
 	IVY_BRIDGE,
 	HASWELL,
 	BROADWELL,
+	KNIGHTS_LANDING,
 };
 
 struct sbridge_pvt;
@@ -309,6 +337,16 @@ struct sbridge_dev {
 	struct mem_ctl_info	*mci;
 };
 
+struct knl_pvt {
+	struct pci_dev          *pci_cha[KNL_MAX_CHAS];
+	struct pci_dev          *pci_channel[KNL_MAX_CHANNELS];
+	struct pci_dev          *pci_mc0;
+	struct pci_dev          *pci_mc1;
+	struct pci_dev          *pci_mc0_misc;
+	struct pci_dev          *pci_mc1_misc;
+	struct pci_dev          *pci_mc_info; /* tolm, tohm */
+};
+
 struct sbridge_pvt {
 	struct pci_dev		*pci_ta, *pci_ddrio, *pci_ras;
 	struct pci_dev		*pci_sad0, *pci_sad1;
@@ -337,6 +375,7 @@ struct sbridge_pvt {
 
 	/* Memory description */
 	u64			tolm, tohm;
+	struct knl_pvt knl;
 };
 
 #define PCI_DESCR(device_id, opt)	\
@@ -510,6 +549,50 @@ static const struct pci_id_table pci_dev_descr_haswell_table[] = {
 	{0,}			/* 0 terminated list. */
 };
 
+/* Knight's Landing Support */
+/*
+ * KNL's memory channels are swizzled between memory controllers.
+ * MC0 is mapped to CH3,5,6 and MC1 is mapped to CH0,1,2
+ */
+#define knl_channel_remap(channel) ((channel + 3) % 6)
+
+/* Memory controller, TAD tables, error injection - 2-8-0, 2-9-0 (2 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_MC       0x7840
+/* DRAM channel stuff; bank addrs, dimmmtr, etc.. 2-8-2 - 2-9-4 (6 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_CHANNEL  0x7843
+/* kdrwdbu TAD limits/offsets, MCMTR - 2-10-1, 2-11-1 (2 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_TA       0x7844
+/* CHA broadcast registers, dram rules - 1-29-0 (1 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0     0x782a
+/* SAD target - 1-29-1 (1 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1     0x782b
+/* Caching / Home Agent */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_CHA      0x782c
+/* Device with TOLM and TOHM, 0-5-0 (1 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM    0x7810
+
+/*
+ * KNL differs from SB, IB, and Haswell in that it has multiple
+ * instances of the same device with the same device ID, so we handle that
+ * by creating as many copies in the table as we expect to find.
+ * (Like device ID must be grouped together.)
+ */
+
+static const struct pci_id_descr pci_dev_descr_knl[] = {
+	[0]         = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0, 0) },
+	[1]         = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1, 0) },
+	[2 ... 3]   = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_MC, 0)},
+	[4 ... 41]  = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHA, 0) },
+	[42 ... 47] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHANNEL, 0) },
+	[48]        = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TA, 0) },
+	[49]        = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM, 0) },
+};
+
+static const struct pci_id_table pci_dev_descr_knl_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_knl),
+	{0,}
+};
+
 /*
  * Broadwell support
  *
@@ -586,6 +669,7 @@ static const struct pci_device_id sbridge_pci_tbl[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0)},
 	{0,}			/* 0 terminated list. */
 };
 
@@ -599,7 +683,7 @@ static inline int numrank(enum type type, u32 mtr)
 	int ranks = (1 << RANK_CNT_BITS(mtr));
 	int max = 4;
 
-	if (type == HASWELL || type == BROADWELL)
+	if (type == HASWELL || type == BROADWELL || type == KNIGHTS_LANDING)
 		max = 8;
 
 	if (ranks > max) {
@@ -748,6 +832,47 @@ static u32 dram_attr(u32 reg)
 	return GET_BITFIELD(reg, 2, 3);
 }
 
+static u64 knl_sad_limit(u32 reg)
+{
+	return (GET_BITFIELD(reg, 7, 26) << 26) | 0x3ffffff;
+}
+
+static u32 knl_interleave_mode(u32 reg)
+{
+	return GET_BITFIELD(reg, 1, 2);
+}
+
+static char *knl_show_interleave_mode(u32 reg)
+{
+	char *s;
+
+	switch (knl_interleave_mode(reg)) {
+	case 0:
+		s = "use address bits [8:6]";
+		break;
+	case 1:
+		s = "use address bits [10:8]";
+		break;
+	case 2:
+		s = "use address bits [14:12]";
+		break;
+	case 3:
+		s = "use address bits [32:30]";
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	return s;
+}
+
+static u32 dram_attr_knl(u32 reg)
+{
+	return GET_BITFIELD(reg, 3, 4);
+}
+
+
 static enum mem_type get_memory_type(struct sbridge_pvt *pvt)
 {
 	u32 reg;
@@ -842,6 +967,12 @@ static enum dev_type broadwell_get_width(struct sbridge_pvt *pvt, u32 mtr)
 	return __ibridge_get_width(GET_BITFIELD(mtr, 8, 9));
 }
 
+static enum mem_type knl_get_memory_type(struct sbridge_pvt *pvt)
+{
+	/* DDR4 RDIMMS and LRDIMMS are supported */
+	return MEM_RDDR4;
+}
+
 static u8 get_node_id(struct sbridge_pvt *pvt)
 {
 	u32 reg;
@@ -857,6 +988,15 @@ static u8 haswell_get_node_id(struct sbridge_pvt *pvt)
 	return GET_BITFIELD(reg, 0, 3);
 }
 
+static u8 knl_get_node_id(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, &reg);
+	return GET_BITFIELD(reg, 0, 2);
+}
+
+
 static u64 haswell_get_tolm(struct sbridge_pvt *pvt)
 {
 	u32 reg;
@@ -878,6 +1018,26 @@ static u64 haswell_get_tohm(struct sbridge_pvt *pvt)
 	return rc | 0x1ffffff;
 }
 
+static u64 knl_get_tolm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOLM, &reg);
+	return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff;
+}
+
+static u64 knl_get_tohm(struct sbridge_pvt *pvt)
+{
+	u64 rc;
+	u32 reg_lo, reg_hi;
+
+	pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_0, &reg_lo);
+	pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_1, &reg_hi);
+	rc = ((u64)reg_hi << 32) | reg_lo;
+	return rc | 0x3ffffff;
+}
+
+
 static u64 haswell_rir_limit(u32 reg)
 {
 	return (((u64)GET_BITFIELD(reg,  1, 11) + 1) << 29) - 1;
@@ -935,11 +1095,22 @@ static int check_if_ecc_is_active(const u8 bus, enum type type)
 	case BROADWELL:
 		id = PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA;
 		break;
+	case KNIGHTS_LANDING:
+		/*
+		 * KNL doesn't group things by bus the same way
+		 * SB/IB/Haswell does.
+		 */
+		id = PCI_DEVICE_ID_INTEL_KNL_IMC_TA;
+		break;
 	default:
 		return -ENODEV;
 	}
 
-	pdev = get_pdev_same_bus(bus, id);
+	if (type != KNIGHTS_LANDING)
+		pdev = get_pdev_same_bus(bus, id);
+	else
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, id, 0);
+
 	if (!pdev) {
 		sbridge_printk(KERN_ERR, "Couldn't find PCI device "
 					"%04x:%04x! on bus %02d\n",
@@ -947,7 +1118,8 @@ static int check_if_ecc_is_active(const u8 bus, enum type type)
 		return -ENODEV;
 	}
 
-	pci_read_config_dword(pdev, MCMTR, &mcmtr);
+	pci_read_config_dword(pdev,
+			type == KNIGHTS_LANDING ? KNL_MCMTR : MCMTR, &mcmtr);
 	if (!IS_ECC_ENABLED(mcmtr)) {
 		sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n");
 		return -ENODEV;
@@ -955,6 +1127,476 @@ static int check_if_ecc_is_active(const u8 bus, enum type type)
 	return 0;
 }
 
+/* Low bits of TAD limit, and some metadata. */
+static const u32 knl_tad_dram_limit_lo[] = {
+	0x400, 0x500, 0x600, 0x700,
+	0x800, 0x900, 0xa00, 0xb00,
+};
+
+/* Low bits of TAD offset. */
+static const u32 knl_tad_dram_offset_lo[] = {
+	0x404, 0x504, 0x604, 0x704,
+	0x804, 0x904, 0xa04, 0xb04,
+};
+
+/* High 16 bits of TAD limit and offset. */
+static const u32 knl_tad_dram_hi[] = {
+	0x408, 0x508, 0x608, 0x708,
+	0x808, 0x908, 0xa08, 0xb08,
+};
+
+/* Number of ways a tad entry is interleaved. */
+static const u32 knl_tad_ways[] = {
+	8, 6, 4, 3, 2, 1,
+};
+
+/*
+ * Retrieve the n'th Target Address Decode table entry
+ * from the memory controller's TAD table.
+ *
+ * @pvt:	driver private data
+ * @entry:	which entry you want to retrieve
+ * @mc:		which memory controller (0 or 1)
+ * @offset:	output tad range offset
+ * @limit:	output address of first byte above tad range
+ * @ways:	output number of interleave ways
+ *
+ * The offset value has curious semantics.  It's a sort of running total
+ * of the sizes of all the memory regions that aren't mapped in this
+ * tad table.
+ */
+static int knl_get_tad(const struct sbridge_pvt *pvt,
+		const int entry,
+		const int mc,
+		u64 *offset,
+		u64 *limit,
+		int *ways)
+{
+	u32 reg_limit_lo, reg_offset_lo, reg_hi;
+	struct pci_dev *pci_mc;
+	int way_id;
+
+	switch (mc) {
+	case 0:
+		pci_mc = pvt->knl.pci_mc0;
+		break;
+	case 1:
+		pci_mc = pvt->knl.pci_mc1;
+		break;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	pci_read_config_dword(pci_mc,
+			knl_tad_dram_limit_lo[entry], &reg_limit_lo);
+	pci_read_config_dword(pci_mc,
+			knl_tad_dram_offset_lo[entry], &reg_offset_lo);
+	pci_read_config_dword(pci_mc,
+			knl_tad_dram_hi[entry], &reg_hi);
+
+	/* Is this TAD entry enabled? */
+	if (!GET_BITFIELD(reg_limit_lo, 0, 0))
+		return -ENODEV;
+
+	way_id = GET_BITFIELD(reg_limit_lo, 3, 5);
+
+	if (way_id < ARRAY_SIZE(knl_tad_ways)) {
+		*ways = knl_tad_ways[way_id];
+	} else {
+		*ways = 0;
+		sbridge_printk(KERN_ERR,
+				"Unexpected value %d in mc_tad_limit_lo wayness field\n",
+				way_id);
+		return -ENODEV;
+	}
+
+	/*
+	 * The least significant 6 bits of base and limit are truncated.
+	 * For limit, we fill the missing bits with 1s.
+	 */
+	*offset = ((u64) GET_BITFIELD(reg_offset_lo, 6, 31) << 6) |
+				((u64) GET_BITFIELD(reg_hi, 0,  15) << 32);
+	*limit = ((u64) GET_BITFIELD(reg_limit_lo,  6, 31) << 6) | 63 |
+				((u64) GET_BITFIELD(reg_hi, 16, 31) << 32);
+
+	return 0;
+}
+
+/* Determine which memory controller is responsible for a given channel. */
+static int knl_channel_mc(int channel)
+{
+	WARN_ON(channel < 0 || channel >= 6);
+
+	return channel < 3 ? 1 : 0;
+}
+
+/*
+ * Get the Nth entry from EDC_ROUTE_TABLE register.
+ * (This is the per-tile mapping of logical interleave targets to
+ *  physical EDC modules.)
+ *
+ * entry 0: 0:2
+ *       1: 3:5
+ *       2: 6:8
+ *       3: 9:11
+ *       4: 12:14
+ *       5: 15:17
+ *       6: 18:20
+ *       7: 21:23
+ * reserved: 24:31
+ */
+static u32 knl_get_edc_route(int entry, u32 reg)
+{
+	WARN_ON(entry >= KNL_MAX_EDCS);
+	return GET_BITFIELD(reg, entry*3, (entry*3)+2);
+}
+
+/*
+ * Get the Nth entry from MC_ROUTE_TABLE register.
+ * (This is the per-tile mapping of logical interleave targets to
+ *  physical DRAM channels modules.)
+ *
+ * entry 0: mc 0:2   channel 18:19
+ *       1: mc 3:5   channel 20:21
+ *       2: mc 6:8   channel 22:23
+ *       3: mc 9:11  channel 24:25
+ *       4: mc 12:14 channel 26:27
+ *       5: mc 15:17 channel 28:29
+ * reserved: 30:31
+ *
+ * Though we have 3 bits to identify the MC, we should only see
+ * the values 0 or 1.
+ */
+
+static u32 knl_get_mc_route(int entry, u32 reg)
+{
+	int mc, chan;
+
+	WARN_ON(entry >= KNL_MAX_CHANNELS);
+
+	mc = GET_BITFIELD(reg, entry*3, (entry*3)+2);
+	chan = GET_BITFIELD(reg, (entry*2) + 18, (entry*2) + 18 + 1);
+
+	return knl_channel_remap(mc*3 + chan);
+}
+
+/*
+ * Render the EDC_ROUTE register in human-readable form.
+ * Output string s should be at least KNL_MAX_EDCS*2 bytes.
+ */
+static void knl_show_edc_route(u32 reg, char *s)
+{
+	int i;
+
+	for (i = 0; i < KNL_MAX_EDCS; i++) {
+		s[i*2] = knl_get_edc_route(i, reg) + '0';
+		s[i*2+1] = '-';
+	}
+
+	s[KNL_MAX_EDCS*2 - 1] = '\0';
+}
+
+/*
+ * Render the MC_ROUTE register in human-readable form.
+ * Output string s should be at least KNL_MAX_CHANNELS*2 bytes.
+ */
+static void knl_show_mc_route(u32 reg, char *s)
+{
+	int i;
+
+	for (i = 0; i < KNL_MAX_CHANNELS; i++) {
+		s[i*2] = knl_get_mc_route(i, reg) + '0';
+		s[i*2+1] = '-';
+	}
+
+	s[KNL_MAX_CHANNELS*2 - 1] = '\0';
+}
+
+#define KNL_EDC_ROUTE 0xb8
+#define KNL_MC_ROUTE 0xb4
+
+/* Is this dram rule backed by regular DRAM in flat mode? */
+#define KNL_EDRAM(reg) GET_BITFIELD(reg, 29, 29)
+
+/* Is this dram rule cached? */
+#define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28)
+
+/* Is this rule backed by edc ? */
+#define KNL_EDRAM_ONLY(reg) GET_BITFIELD(reg, 29, 29)
+
+/* Is this rule backed by DRAM, cacheable in EDRAM? */
+#define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28)
+
+/* Is this rule mod3? */
+#define KNL_MOD3(reg) GET_BITFIELD(reg, 27, 27)
+
+/*
+ * Figure out how big our RAM modules are.
+ *
+ * The DIMMMTR register in KNL doesn't tell us the size of the DIMMs, so we
+ * have to figure this out from the SAD rules, interleave lists, route tables,
+ * and TAD rules.
+ *
+ * SAD rules can have holes in them (e.g. the 3G-4G hole), so we have to
+ * inspect the TAD rules to figure out how large the SAD regions really are.
+ *
+ * When we know the real size of a SAD region and how many ways it's
+ * interleaved, we know the individual contribution of each channel to
+ * TAD is size/ways.
+ *
+ * Finally, we have to check whether each channel participates in each SAD
+ * region.
+ *
+ * Fortunately, KNL only supports one DIMM per channel, so once we know how
+ * much memory the channel uses, we know the DIMM is at least that large.
+ * (The BIOS might possibly choose not to map all available memory, in which
+ * case we will underreport the size of the DIMM.)
+ *
+ * In theory, we could try to determine the EDC sizes as well, but that would
+ * only work in flat mode, not in cache mode.
+ *
+ * @mc_sizes: Output sizes of channels (must have space for KNL_MAX_CHANNELS
+ *            elements)
+ */
+static int knl_get_dimm_capacity(struct sbridge_pvt *pvt, u64 *mc_sizes)
+{
+	u64 sad_base, sad_size, sad_limit = 0;
+	u64 tad_base, tad_size, tad_limit, tad_deadspace, tad_livespace;
+	int sad_rule = 0;
+	int tad_rule = 0;
+	int intrlv_ways, tad_ways;
+	u32 first_pkg, pkg;
+	int i;
+	u64 sad_actual_size[2]; /* sad size accounting for holes, per mc */
+	u32 dram_rule, interleave_reg;
+	u32 mc_route_reg[KNL_MAX_CHAS];
+	u32 edc_route_reg[KNL_MAX_CHAS];
+	int edram_only;
+	char edc_route_string[KNL_MAX_EDCS*2];
+	char mc_route_string[KNL_MAX_CHANNELS*2];
+	int cur_reg_start;
+	int mc;
+	int channel;
+	int way;
+	int participants[KNL_MAX_CHANNELS];
+	int participant_count = 0;
+
+	for (i = 0; i < KNL_MAX_CHANNELS; i++)
+		mc_sizes[i] = 0;
+
+	/* Read the EDC route table in each CHA. */
+	cur_reg_start = 0;
+	for (i = 0; i < KNL_MAX_CHAS; i++) {
+		pci_read_config_dword(pvt->knl.pci_cha[i],
+				KNL_EDC_ROUTE, &edc_route_reg[i]);
+
+		if (i > 0 && edc_route_reg[i] != edc_route_reg[i-1]) {
+			knl_show_edc_route(edc_route_reg[i-1],
+					edc_route_string);
+			if (cur_reg_start == i-1)
+				edac_dbg(0, "edc route table for CHA %d: %s\n",
+					cur_reg_start, edc_route_string);
+			else
+				edac_dbg(0, "edc route table for CHA %d-%d: %s\n",
+					cur_reg_start, i-1, edc_route_string);
+			cur_reg_start = i;
+		}
+	}
+	knl_show_edc_route(edc_route_reg[i-1], edc_route_string);
+	if (cur_reg_start == i-1)
+		edac_dbg(0, "edc route table for CHA %d: %s\n",
+			cur_reg_start, edc_route_string);
+	else
+		edac_dbg(0, "edc route table for CHA %d-%d: %s\n",
+			cur_reg_start, i-1, edc_route_string);
+
+	/* Read the MC route table in each CHA. */
+	cur_reg_start = 0;
+	for (i = 0; i < KNL_MAX_CHAS; i++) {
+		pci_read_config_dword(pvt->knl.pci_cha[i],
+			KNL_MC_ROUTE, &mc_route_reg[i]);
+
+		if (i > 0 && mc_route_reg[i] != mc_route_reg[i-1]) {
+			knl_show_mc_route(mc_route_reg[i-1], mc_route_string);
+			if (cur_reg_start == i-1)
+				edac_dbg(0, "mc route table for CHA %d: %s\n",
+					cur_reg_start, mc_route_string);
+			else
+				edac_dbg(0, "mc route table for CHA %d-%d: %s\n",
+					cur_reg_start, i-1, mc_route_string);
+			cur_reg_start = i;
+		}
+	}
+	knl_show_mc_route(mc_route_reg[i-1], mc_route_string);
+	if (cur_reg_start == i-1)
+		edac_dbg(0, "mc route table for CHA %d: %s\n",
+			cur_reg_start, mc_route_string);
+	else
+		edac_dbg(0, "mc route table for CHA %d-%d: %s\n",
+			cur_reg_start, i-1, mc_route_string);
+
+	/* Process DRAM rules */
+	for (sad_rule = 0; sad_rule < pvt->info.max_sad; sad_rule++) {
+		/* previous limit becomes the new base */
+		sad_base = sad_limit;
+
+		pci_read_config_dword(pvt->pci_sad0,
+			pvt->info.dram_rule[sad_rule], &dram_rule);
+
+		if (!DRAM_RULE_ENABLE(dram_rule))
+			break;
+
+		edram_only = KNL_EDRAM_ONLY(dram_rule);
+
+		sad_limit = pvt->info.sad_limit(dram_rule)+1;
+		sad_size = sad_limit - sad_base;
+
+		pci_read_config_dword(pvt->pci_sad0,
+			pvt->info.interleave_list[sad_rule], &interleave_reg);
+
+		/*
+		 * Find out how many ways this dram rule is interleaved.
+		 * We stop when we see the first channel again.
+		 */
+		first_pkg = sad_pkg(pvt->info.interleave_pkg,
+						interleave_reg, 0);
+		for (intrlv_ways = 1; intrlv_ways < 8; intrlv_ways++) {
+			pkg = sad_pkg(pvt->info.interleave_pkg,
+						interleave_reg, intrlv_ways);
+
+			if ((pkg & 0x8) == 0) {
+				/*
+				 * 0 bit means memory is non-local,
+				 * which KNL doesn't support
+				 */
+				edac_dbg(0, "Unexpected interleave target %d\n",
+					pkg);
+				return -1;
+			}
+
+			if (pkg == first_pkg)
+				break;
+		}
+		if (KNL_MOD3(dram_rule))
+			intrlv_ways *= 3;
+
+		edac_dbg(3, "dram rule %d (base 0x%llx, limit 0x%llx), %d way interleave%s\n",
+			sad_rule,
+			sad_base,
+			sad_limit,
+			intrlv_ways,
+			edram_only ? ", EDRAM" : "");
+
+		/*
+		 * Find out how big the SAD region really is by iterating
+		 * over TAD tables (SAD regions may contain holes).
+		 * Each memory controller might have a different TAD table, so
+		 * we have to look at both.
+		 *
+		 * Livespace is the memory that's mapped in this TAD table,
+		 * deadspace is the holes (this could be the MMIO hole, or it
+		 * could be memory that's mapped by the other TAD table but
+		 * not this one).
+		 */
+		for (mc = 0; mc < 2; mc++) {
+			sad_actual_size[mc] = 0;
+			tad_livespace = 0;
+			for (tad_rule = 0;
+					tad_rule < ARRAY_SIZE(
+						knl_tad_dram_limit_lo);
+					tad_rule++) {
+				if (knl_get_tad(pvt,
+						tad_rule,
+						mc,
+						&tad_deadspace,
+						&tad_limit,
+						&tad_ways))
+					break;
+
+				tad_size = (tad_limit+1) -
+					(tad_livespace + tad_deadspace);
+				tad_livespace += tad_size;
+				tad_base = (tad_limit+1) - tad_size;
+
+				if (tad_base < sad_base) {
+					if (tad_limit > sad_base)
+						edac_dbg(0, "TAD region overlaps lower SAD boundary -- TAD tables may be configured incorrectly.\n");
+				} else if (tad_base < sad_limit) {
+					if (tad_limit+1 > sad_limit) {
+						edac_dbg(0, "TAD region overlaps upper SAD boundary -- TAD tables may be configured incorrectly.\n");
+					} else {
+						/* TAD region is completely inside SAD region */
+						edac_dbg(3, "TAD region %d 0x%llx - 0x%llx (%lld bytes) table%d\n",
+							tad_rule, tad_base,
+							tad_limit, tad_size,
+							mc);
+						sad_actual_size[mc] += tad_size;
+					}
+				}
+				tad_base = tad_limit+1;
+			}
+		}
+
+		for (mc = 0; mc < 2; mc++) {
+			edac_dbg(3, " total TAD DRAM footprint in table%d : 0x%llx (%lld bytes)\n",
+				mc, sad_actual_size[mc], sad_actual_size[mc]);
+		}
+
+		/* Ignore EDRAM rule */
+		if (edram_only)
+			continue;
+
+		/* Figure out which channels participate in interleave. */
+		for (channel = 0; channel < KNL_MAX_CHANNELS; channel++)
+			participants[channel] = 0;
+
+		/* For each channel, does at least one CHA have
+		 * this channel mapped to the given target?
+		 */
+		for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) {
+			for (way = 0; way < intrlv_ways; way++) {
+				int target;
+				int cha;
+
+				if (KNL_MOD3(dram_rule))
+					target = way;
+				else
+					target = 0x7 & sad_pkg(
+				pvt->info.interleave_pkg, interleave_reg, way);
+
+				for (cha = 0; cha < KNL_MAX_CHAS; cha++) {
+					if (knl_get_mc_route(target,
+						mc_route_reg[cha]) == channel
+						&& participants[channel]) {
+						participant_count++;
+						participants[channel] = 1;
+						break;
+					}
+				}
+			}
+		}
+
+		if (participant_count != intrlv_ways)
+			edac_dbg(0, "participant_count (%d) != interleave_ways (%d): DIMM size may be incorrect\n",
+				participant_count, intrlv_ways);
+
+		for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) {
+			mc = knl_channel_mc(channel);
+			if (participants[channel]) {
+				edac_dbg(4, "mc channel %d contributes %lld bytes via sad entry %d\n",
+					channel,
+					sad_actual_size[mc]/intrlv_ways,
+					sad_rule);
+				mc_sizes[channel] +=
+					sad_actual_size[mc]/intrlv_ways;
+			}
+		}
+	}
+
+	return 0;
+}
+
 static int get_dimm_config(struct mem_ctl_info *mci)
 {
 	struct sbridge_pvt *pvt = mci->pvt_info;
@@ -964,13 +1606,20 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 	u32 reg;
 	enum edac_type mode;
 	enum mem_type mtype;
+	int channels = pvt->info.type == KNIGHTS_LANDING ?
+		KNL_MAX_CHANNELS : NUM_CHANNELS;
+	u64 knl_mc_sizes[KNL_MAX_CHANNELS];
 
-	if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL)
+	if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL ||
+			pvt->info.type == KNIGHTS_LANDING)
 		pci_read_config_dword(pvt->pci_sad1, SAD_TARGET, &reg);
 	else
 		pci_read_config_dword(pvt->pci_br0, SAD_TARGET, &reg);
 
-	pvt->sbridge_dev->source_id = SOURCE_ID(reg);
+	if (pvt->info.type == KNIGHTS_LANDING)
+		pvt->sbridge_dev->source_id = SOURCE_ID_KNL(reg);
+	else
+		pvt->sbridge_dev->source_id = SOURCE_ID(reg);
 
 	pvt->sbridge_dev->node_id = pvt->info.get_node_id(pvt);
 	edac_dbg(0, "mc#%d: Node ID: %d, source ID: %d\n",
@@ -978,31 +1627,42 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 		 pvt->sbridge_dev->node_id,
 		 pvt->sbridge_dev->source_id);
 
-	pci_read_config_dword(pvt->pci_ras, RASENABLES, &reg);
-	if (IS_MIRROR_ENABLED(reg)) {
-		edac_dbg(0, "Memory mirror is enabled\n");
-		pvt->is_mirrored = true;
-	} else {
-		edac_dbg(0, "Memory mirror is disabled\n");
+	/* KNL doesn't support mirroring or lockstep,
+	 * and is always closed page
+	 */
+	if (pvt->info.type == KNIGHTS_LANDING) {
+		mode = EDAC_S4ECD4ED;
 		pvt->is_mirrored = false;
-	}
 
-	pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr);
-	if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
-		edac_dbg(0, "Lockstep is enabled\n");
-		mode = EDAC_S8ECD8ED;
-		pvt->is_lockstep = true;
+		if (knl_get_dimm_capacity(pvt, knl_mc_sizes) != 0)
+			return -1;
 	} else {
-		edac_dbg(0, "Lockstep is disabled\n");
-		mode = EDAC_S4ECD4ED;
-		pvt->is_lockstep = false;
-	}
-	if (IS_CLOSE_PG(pvt->info.mcmtr)) {
-		edac_dbg(0, "address map is on closed page mode\n");
-		pvt->is_close_pg = true;
-	} else {
-		edac_dbg(0, "address map is on open page mode\n");
-		pvt->is_close_pg = false;
+		pci_read_config_dword(pvt->pci_ras, RASENABLES, &reg);
+		if (IS_MIRROR_ENABLED(reg)) {
+			edac_dbg(0, "Memory mirror is enabled\n");
+			pvt->is_mirrored = true;
+		} else {
+			edac_dbg(0, "Memory mirror is disabled\n");
+			pvt->is_mirrored = false;
+		}
+
+		pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr);
+		if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
+			edac_dbg(0, "Lockstep is enabled\n");
+			mode = EDAC_S8ECD8ED;
+			pvt->is_lockstep = true;
+		} else {
+			edac_dbg(0, "Lockstep is disabled\n");
+			mode = EDAC_S4ECD4ED;
+			pvt->is_lockstep = false;
+		}
+		if (IS_CLOSE_PG(pvt->info.mcmtr)) {
+			edac_dbg(0, "address map is on closed page mode\n");
+			pvt->is_close_pg = true;
+		} else {
+			edac_dbg(0, "address map is on open page mode\n");
+			pvt->is_close_pg = false;
+		}
 	}
 
 	mtype = pvt->info.get_memory_type(pvt);
@@ -1018,23 +1678,46 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 	else
 		banks = 8;
 
-	for (i = 0; i < NUM_CHANNELS; i++) {
+	for (i = 0; i < channels; i++) {
 		u32 mtr;
 
-		if (!pvt->pci_tad[i])
-			continue;
-		for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+		int max_dimms_per_channel;
+
+		if (pvt->info.type == KNIGHTS_LANDING) {
+			max_dimms_per_channel = 1;
+			if (!pvt->knl.pci_channel[i])
+				continue;
+		} else {
+			max_dimms_per_channel = ARRAY_SIZE(mtr_regs);
+			if (!pvt->pci_tad[i])
+				continue;
+		}
+
+		for (j = 0; j < max_dimms_per_channel; j++) {
 			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
 				       i, j, 0);
-			pci_read_config_dword(pvt->pci_tad[i],
-					      mtr_regs[j], &mtr);
+			if (pvt->info.type == KNIGHTS_LANDING) {
+				pci_read_config_dword(pvt->knl.pci_channel[i],
+					knl_mtr_reg, &mtr);
+			} else {
+				pci_read_config_dword(pvt->pci_tad[i],
+					mtr_regs[j], &mtr);
+			}
 			edac_dbg(4, "Channel #%d  MTR%d = %x\n", i, j, mtr);
 			if (IS_DIMM_PRESENT(mtr)) {
 				pvt->channel[i].dimms++;
 
 				ranks = numrank(pvt->info.type, mtr);
-				rows = numrow(mtr);
-				cols = numcol(mtr);
+
+				if (pvt->info.type == KNIGHTS_LANDING) {
+					/* For DDR4, this is fixed. */
+					cols = 1 << 10;
+					rows = knl_mc_sizes[i] /
+						((u64) cols * ranks * banks * 8);
+				} else {
+					rows = numrow(mtr);
+					cols = numcol(mtr);
+				}
 
 				size = ((u64)rows * cols * banks * ranks) >> (20 - 3);
 				npages = MiB_TO_PAGES(size);
@@ -1131,6 +1814,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 		}
 	}
 
+	if (pvt->info.type == KNIGHTS_LANDING)
+		return;
+
 	/*
 	 * Step 3) Get TAD range
 	 */
@@ -1727,6 +2413,8 @@ static int sbridge_get_all_devices_full(u8 *num_mc,
 
 #define sbridge_get_all_devices(num_mc, table) \
 		sbridge_get_all_devices_full(num_mc, table, 0, 0)
+#define sbridge_get_all_devices_knl(num_mc, table) \
+		sbridge_get_all_devices_full(num_mc, table, 1, 1)
 
 static int sbridge_mci_bind_devs(struct mem_ctl_info *mci,
 				 struct sbridge_dev *sbridge_dev)
@@ -2083,6 +2771,131 @@ static int broadwell_mci_bind_devs(struct mem_ctl_info *mci,
 	return -ENODEV;
 }
 
+static int knl_mci_bind_devs(struct mem_ctl_info *mci,
+			struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int dev, func;
+
+	int i;
+	int devidx;
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		/* Extract PCI device and function. */
+		dev = (pdev->devfn >> 3) & 0x1f;
+		func = pdev->devfn & 0x7;
+
+		switch (pdev->device) {
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_MC:
+			if (dev == 8)
+				pvt->knl.pci_mc0 = pdev;
+			else if (dev == 9)
+				pvt->knl.pci_mc1 = pdev;
+			else {
+				sbridge_printk(KERN_ERR,
+					"Memory controller in unexpected place! (dev %d, fn %d)\n",
+					dev, func);
+				continue;
+			}
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0:
+			pvt->pci_sad0 = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1:
+			pvt->pci_sad1 = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_CHA:
+			/* There are one of these per tile, and range from
+			 * 1.14.0 to 1.18.5.
+			 */
+			devidx = ((dev-14)*8)+func;
+
+			if (devidx < 0 || devidx >= KNL_MAX_CHAS) {
+				sbridge_printk(KERN_ERR,
+					"Caching and Home Agent in unexpected place! (dev %d, fn %d)\n",
+					dev, func);
+				continue;
+			}
+
+			WARN_ON(pvt->knl.pci_cha[devidx] != NULL);
+
+			pvt->knl.pci_cha[devidx] = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_CHANNEL:
+			devidx = -1;
+
+			/*
+			 *  MC0 channels 0-2 are device 9 function 2-4,
+			 *  MC1 channels 3-5 are device 8 function 2-4.
+			 */
+
+			if (dev == 9)
+				devidx = func-2;
+			else if (dev == 8)
+				devidx = 3 + (func-2);
+
+			if (devidx < 0 || devidx >= KNL_MAX_CHANNELS) {
+				sbridge_printk(KERN_ERR,
+					"DRAM Channel Registers in unexpected place! (dev %d, fn %d)\n",
+					dev, func);
+				continue;
+			}
+
+			WARN_ON(pvt->knl.pci_channel[devidx] != NULL);
+			pvt->knl.pci_channel[devidx] = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM:
+			pvt->knl.pci_mc_info = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_TA:
+			pvt->pci_ta = pdev;
+			break;
+
+		default:
+			sbridge_printk(KERN_ERR, "Unexpected device %d\n",
+				pdev->device);
+			break;
+		}
+	}
+
+	if (!pvt->knl.pci_mc0  || !pvt->knl.pci_mc1 ||
+	    !pvt->pci_sad0     || !pvt->pci_sad1    ||
+	    !pvt->pci_ta) {
+		goto enodev;
+	}
+
+	for (i = 0; i < KNL_MAX_CHANNELS; i++) {
+		if (!pvt->knl.pci_channel[i]) {
+			sbridge_printk(KERN_ERR, "Missing channel %d\n", i);
+			goto enodev;
+		}
+	}
+
+	for (i = 0; i < KNL_MAX_CHAS; i++) {
+		if (!pvt->knl.pci_cha[i]) {
+			sbridge_printk(KERN_ERR, "Missing CHA %d\n", i);
+			goto enodev;
+		}
+	}
+
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+}
+
 /****************************************************************************
 			Error check routines
  ****************************************************************************/
@@ -2172,8 +2985,36 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
 	if (!GET_BITFIELD(m->status, 58, 58))
 		return;
 
-	rc = get_memory_error_data(mci, m->addr, &socket, &ha,
-				   &channel_mask, &rank, &area_type, msg);
+	if (pvt->info.type == KNIGHTS_LANDING) {
+		if (channel == 14) {
+			edac_dbg(0, "%s%s err_code:%04x:%04x EDRAM bank %d\n",
+				overflow ? " OVERFLOW" : "",
+				(uncorrected_error && recoverable)
+				? " recoverable" : "",
+				mscod, errcode,
+				m->bank);
+		} else {
+			char A = *("A");
+
+			channel = knl_channel_remap(channel);
+			channel_mask = 1 << channel;
+			snprintf(msg, sizeof(msg),
+				"%s%s err_code:%04x:%04x channel:%d (DIMM_%c)",
+				overflow ? " OVERFLOW" : "",
+				(uncorrected_error && recoverable)
+				? " recoverable" : " ",
+				mscod, errcode, channel, A + channel);
+			edac_mc_handle_error(tp_event, mci, core_err_cnt,
+				m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+				channel, 0, -1,
+				optype, msg);
+		}
+		return;
+	} else {
+		rc = get_memory_error_data(mci, m->addr, &socket, &ha,
+				&channel_mask, &rank, &area_type, msg);
+	}
+
 	if (rc < 0)
 		goto err_parsing;
 	new_mci = get_mci_for_node_id(socket);
@@ -2404,10 +3245,11 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 
 	/* allocate a new MC control structure */
 	layers[0].type = EDAC_MC_LAYER_CHANNEL;
-	layers[0].size = NUM_CHANNELS;
+	layers[0].size = type == KNIGHTS_LANDING ?
+		KNL_MAX_CHANNELS : NUM_CHANNELS;
 	layers[0].is_virt_csrow = false;
 	layers[1].type = EDAC_MC_LAYER_SLOT;
-	layers[1].size = MAX_DIMMS;
+	layers[1].size = type == KNIGHTS_LANDING ? 1 : MAX_DIMMS;
 	layers[1].is_virt_csrow = true;
 	mci = edac_mc_alloc(sbridge_dev->mc, ARRAY_SIZE(layers), layers,
 			    sizeof(*pvt));
@@ -2425,7 +3267,8 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 	pvt->sbridge_dev = sbridge_dev;
 	sbridge_dev->mci = mci;
 
-	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->mtype_cap = type == KNIGHTS_LANDING ?
+		MEM_FLAG_DDR4 : MEM_FLAG_DDR3;
 	mci->edac_ctl_cap = EDAC_FLAG_NONE;
 	mci->edac_cap = EDAC_FLAG_NONE;
 	mci->mod_name = "sbridge_edac.c";
@@ -2534,6 +3377,30 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 		if (unlikely(rc < 0))
 			goto fail0;
 		break;
+	case KNIGHTS_LANDING:
+		/* pvt->info.rankcfgr == ??? */
+		pvt->info.get_tolm = knl_get_tolm;
+		pvt->info.get_tohm = knl_get_tohm;
+		pvt->info.dram_rule = knl_dram_rule;
+		pvt->info.get_memory_type = knl_get_memory_type;
+		pvt->info.get_node_id = knl_get_node_id;
+		pvt->info.rir_limit = NULL;
+		pvt->info.sad_limit = knl_sad_limit;
+		pvt->info.interleave_mode = knl_interleave_mode;
+		pvt->info.show_interleave_mode = knl_show_interleave_mode;
+		pvt->info.dram_attr = dram_attr_knl;
+		pvt->info.max_sad = ARRAY_SIZE(knl_dram_rule);
+		pvt->info.interleave_list = knl_interleave_list;
+		pvt->info.max_interleave = ARRAY_SIZE(knl_interleave_list);
+		pvt->info.interleave_pkg = ibridge_interleave_pkg;
+		pvt->info.get_width = ibridge_get_width;
+		mci->ctl_name = kasprintf(GFP_KERNEL,
+			"Knights Landing Socket#%d", mci->mc_idx);
+
+		rc = knl_mci_bind_devs(mci, sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail0;
+		break;
 	}
 
 	/* Get dimm basic config and the memory layout */
@@ -2588,20 +3455,29 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA:
-		rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_ibridge_table);
+		rc = sbridge_get_all_devices(&num_mc,
+					pci_dev_descr_ibridge_table);
 		type = IVY_BRIDGE;
 		break;
 	case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0:
-		rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_sbridge_table);
+		rc = sbridge_get_all_devices(&num_mc,
+					pci_dev_descr_sbridge_table);
 		type = SANDY_BRIDGE;
 		break;
 	case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0:
-		rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_haswell_table);
+		rc = sbridge_get_all_devices(&num_mc,
+					pci_dev_descr_haswell_table);
 		type = HASWELL;
 		break;
 	case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0:
-		rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_broadwell_table);
+		rc = sbridge_get_all_devices(&num_mc,
+					pci_dev_descr_broadwell_table);
 		type = BROADWELL;
+	    break;
+	case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0:
+		rc = sbridge_get_all_devices_knl(&num_mc,
+					pci_dev_descr_knl_table);
+		type = KNIGHTS_LANDING;
 		break;
 	}
 	if (unlikely(rc < 0)) {