leds: qcom-lpg: Add support for PMI632 LPG

The PMI632 PMIC contains 5 PWM channels, 3 of which can be used for
LEDs.

For the LED pattern it doesn't have LUT like other PMICs but uses SDAM
instead. This is not currently implemented in the driver but since LPG
works fine without it, add support for the PMIC now.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230414-pmi632-v2-4-98bafa909c36@z3ntu.xyz

drivers/leds/rgb/leds-qcom-lpg.c

@@ -1414,6 +1414,20 @@ static const struct lpg_data pm8994_lpg_data = {
 	},
 };
 
+/* PMI632 uses SDAM instead of LUT for pattern */
+static const struct lpg_data pmi632_lpg_data = {
+	.triled_base = 0xd000,
+
+	.num_channels = 5,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb300, .triled_mask = BIT(7) },
+		{ .base = 0xb400, .triled_mask = BIT(6) },
+		{ .base = 0xb500, .triled_mask = BIT(5) },
+		{ .base = 0xb600 },
+		{ .base = 0xb700 },
+	},
+};
+
 static const struct lpg_data pmi8994_lpg_data = {
 	.lut_base = 0xb000,
 	.lut_size = 24,
@@ -1505,6 +1519,7 @@ static const struct of_device_id lpg_of_table[] = {
 	{ .compatible = "qcom,pm8916-pwm", .data = &pm8916_pwm_data },
 	{ .compatible = "qcom,pm8941-lpg", .data = &pm8941_lpg_data },
 	{ .compatible = "qcom,pm8994-lpg", .data = &pm8994_lpg_data },
+	{ .compatible = "qcom,pmi632-lpg", .data = &pmi632_lpg_data },
 	{ .compatible = "qcom,pmi8994-lpg", .data = &pmi8994_lpg_data },
 	{ .compatible = "qcom,pmi8998-lpg", .data = &pmi8998_lpg_data },
 	{ .compatible = "qcom,pmc8180c-lpg", .data = &pm8150l_lpg_data },