ARM: tegra: make tegra_resume can work with current and later chips

Because the CPU0 was the first up and the last down core when cluster
power up/down or platform suspend. So only CPU0 needs the rest of the
functions to reset flow controller and re-enable SCU and L2. We also
move the L2 init function for Cortex-A15 to there. The secondery CPU
can just call cpu_resume.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

arch/arm/mach-tegra/reset-handler.S

@@ -45,17 +45,11 @@
 ENTRY(tegra_resume)
 	check_cpu_part_num 0xc09, r8, r9
 	bleq	v7_invalidate_l1
-	blne	tegra_init_l2_for_a15
 
 	cpu_id	r0
-	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
-	cmp	r6, #TEGRA114
-	beq	no_cpu0_chk
-
 	cmp	r0, #0				@ CPU0?
  THUMB(	it	ne )
 	bne	cpu_resume			@ no
-no_cpu0_chk:
 
 	/* Are we on Tegra20? */
 	cmp	r6, #TEGRA20
@@ -75,7 +69,7 @@ no_cpu0_chk:
 
 	mov32	r9, 0xc09
 	cmp	r8, r9
-	bne	not_ca9
+	bne	end_ca9_scu_l2_resume
 #ifdef CONFIG_HAVE_ARM_SCU
 	/* enable SCU */
 	mov32	r0, TEGRA_ARM_PERIF_BASE
@@ -86,7 +80,10 @@ no_cpu0_chk:
 
 	/* L2 cache resume & re-enable */
 	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-not_ca9:
+end_ca9_scu_l2_resume:
+	mov32	r9, 0xc0f
+	cmp	r8, r9
+	bleq	tegra_init_l2_for_a15
 
 	b	cpu_resume
 ENDPROC(tegra_resume)