Merge tag 'media/v5.8-3' of...

Merge tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master

Pull media fixes from Mauro Carvalho Chehab:
 "A series of fixes for the upcoming atomisp driver. They solve issues
  when probing atomisp on devices with multiple cameras and get rid of
  warnings when built with W=1.

  The diffstat is a bit long, as this driver has several abstractions.
  The patches that solved the issues with W=1 had to get rid of some
  duplicated code (there used to have 2 versions of the same code, one
  for ISP2401 and another one for ISP2400).

  As this driver is not in 5.7, such changes won't cause regressions"

* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
  Revert "media: atomisp: keep the ISP powered on when setting it"
  media: atomisp: fix mask and shift operation on ISPSSPM0
  media: atomisp: move system_local consts into a C file
  media: atomisp: get rid of version-specific system_local.h
  media: atomisp: move global stuff into a common header
  media: atomisp: remove non-used 32-bits consts at system_local
  media: atomisp: get rid of some unused static vars
  media: atomisp: Fix error code in ov5693_probe()
  media: atomisp: Replace trace_printk by pr_info
  media: atomisp: Fix __func__ style warnings
  media: atomisp: fix help message for ISP2401 selection
  media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
  media: atomisp: make const arrays static, makes object smaller
  media: atomisp: Clean up non-existing folders from Makefile
  media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
  media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
  media: atomisp: Use temporary variable for device in gmin_subdev_add()
  media: atomisp: Refactor PMIC detection to a separate function
  media: atomisp: Deduplicate return ret in gmin_i2c_write()
  media: atomisp: Make pointer to PMIC client global
  ...

arch/x86/include/asm/iosf_mbi.h

@@ -39,6 +39,7 @@
 #define BT_MBI_UNIT_PMC		0x04
 #define BT_MBI_UNIT_GFX		0x06
 #define BT_MBI_UNIT_SMI		0x0C
+#define BT_MBI_UNIT_CCK		0x14
 #define BT_MBI_UNIT_USB		0x43
 #define BT_MBI_UNIT_SATA	0xA3
 #define BT_MBI_UNIT_PCIE	0xA6

drivers/staging/media/atomisp/Kconfig

@@ -22,7 +22,7 @@ config VIDEO_ATOMISP
 	  module will be called atomisp
 
 config VIDEO_ATOMISP_ISP2401
-	bool "VIDEO_ATOMISP_ISP2401"
+	bool "Use Intel Atom ISP on Cherrytail/Anniedale (ISP2401)"
 	depends on VIDEO_ATOMISP
 	help
 	  Enable support for Atom ISP2401-based boards.

drivers/staging/media/atomisp/Makefile

@@ -156,6 +156,7 @@ atomisp-objs += \
 	pci/hive_isp_css_common/host/timed_ctrl.o \
 	pci/hive_isp_css_common/host/vmem.o \
 	pci/hive_isp_css_shared/host/tag.o \
+	pci/system_local.o \
 
 obj-byt = \
 	pci/css_2400_system/hive/ia_css_isp_configs.o \
@@ -182,7 +183,6 @@ INCLUDES += \
 	-I$(atomisp)/include/hmm/ \
 	-I$(atomisp)/include/mmu/ \
 	-I$(atomisp)/pci/ \
-	-I$(atomisp)/pci/hrt/ \
 	-I$(atomisp)/pci/base/circbuf/interface/ \
 	-I$(atomisp)/pci/base/refcount/interface/ \
 	-I$(atomisp)/pci/camera/pipe/interface/ \
@@ -192,7 +192,6 @@ INCLUDES += \
 	-I$(atomisp)/pci/hive_isp_css_include/ \
 	-I$(atomisp)/pci/hive_isp_css_include/device_access/ \
 	-I$(atomisp)/pci/hive_isp_css_include/host/ \
-	-I$(atomisp)/pci/hive_isp_css_include/memory_access/ \
 	-I$(atomisp)/pci/hive_isp_css_shared/ \
 	-I$(atomisp)/pci/hive_isp_css_shared/host/ \
 	-I$(atomisp)/pci/isp/kernels/ \
@@ -311,9 +310,7 @@ INCLUDES += \
 	-I$(atomisp)/pci/runtime/tagger/interface/
 
 INCLUDES_byt += \
-	-I$(atomisp)/pci/css_2400_system/ \
 	-I$(atomisp)/pci/css_2400_system/hive/ \
-	-I$(atomisp)/pci/css_2400_system/hrt/ \
 
 INCLUDES_cht += \
 	-I$(atomisp)/pci/css_2401_system/ \
@@ -321,7 +318,6 @@ INCLUDES_cht += \
 	-I$(atomisp)/pci/css_2401_system/hive/ \
 	-I$(atomisp)/pci/css_2401_system/hrt/ \
 
-#	-I$(atomisp)/pci/css_2401_system/hrt/ \
 #	-I$(atomisp)/pci/css_2401_system/hive_isp_css_2401_system_generated/ \
 
 DEFINES := -DHRT_HW -DHRT_ISP_CSS_CUSTOM_HOST -DHRT_USE_VIR_ADDRS -D__HOST__

drivers/staging/media/atomisp/i2c/atomisp-ov2680.c

@@ -495,11 +495,11 @@ static int ov2680_h_flip(struct v4l2_subdev *sd, s32 value)
 	ret = ov2680_read_reg(client, 1, OV2680_MIRROR_REG, &val);
 	if (ret)
 		return ret;
-	if (value) {
+	if (value)
 		val |= OV2680_FLIP_MIRROR_BIT_ENABLE;
-	} else {
+	else
 		val &= ~OV2680_FLIP_MIRROR_BIT_ENABLE;
-	}
+
 	ret = ov2680_write_reg(client, 1,
 			       OV2680_MIRROR_REG, val);
 	if (ret)

drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c

@@ -1899,7 +1899,7 @@ static int ov5693_probe(struct i2c_client *client)
 {
 	struct ov5693_device *dev;
 	int i2c;
-	int ret = 0;
+	int ret;
 	void *pdata;
 	unsigned int i;
 
@@ -1929,8 +1929,10 @@ static int ov5693_probe(struct i2c_client *client)
 	pdata = gmin_camera_platform_data(&dev->sd,
 					  ATOMISP_INPUT_FORMAT_RAW_10,
 					  atomisp_bayer_order_bggr);
-	if (!pdata)
+	if (!pdata) {
+		ret = -EINVAL;
 		goto out_free;
+	}
 
 	ret = ov5693_s_config(&dev->sd, client->irq, pdata);
 	if (ret)

drivers/staging/media/atomisp/include/linux/atomisp_platform.h

@@ -250,6 +250,7 @@ const struct atomisp_camera_caps *atomisp_get_default_camera_caps(void);
 #define IS_MFLD	__IS_SOC(INTEL_FAM6_ATOM_SALTWELL_MID)
 #define IS_BYT	__IS_SOC(INTEL_FAM6_ATOM_SILVERMONT)
 #define IS_CHT	__IS_SOC(INTEL_FAM6_ATOM_AIRMONT)
+#define IS_MRFD	__IS_SOC(INTEL_FAM6_ATOM_SILVERMONT_MID)
 #define IS_MOFD	__IS_SOC(INTEL_FAM6_ATOM_AIRMONT_MID)
 
 /* Both CHT and MOFD come with ISP2401 */

drivers/staging/media/atomisp/pci/atomisp-regs.h

@@ -20,9 +20,6 @@
 #define ATOMISP_REGS_H
 
 /* common register definitions */
-#define PUNIT_PORT		0x04
-#define CCK_PORT		0x14
-
 #define PCICMDSTS		0x01
 #define INTR			0x0f
 #define MSI_CAPID		0x24

drivers/staging/media/atomisp/pci/atomisp_acc.c

@@ -355,11 +355,11 @@ int atomisp_acc_map(struct atomisp_sub_device *asd, struct atomisp_acc_map *map)
 
 		pgnr = DIV_ROUND_UP(map->length, PAGE_SIZE);
 		if (pgnr < ((PAGE_ALIGN(map->length)) >> PAGE_SHIFT)) {
-			dev_err(atomisp_dev,
+			dev_err(asd->isp->dev,
 				"user space memory size is less than the expected size..\n");
 			return -ENOMEM;
 		} else if (pgnr > ((PAGE_ALIGN(map->length)) >> PAGE_SHIFT)) {
-			dev_err(atomisp_dev,
+			dev_err(asd->isp->dev,
 				"user space memory size is large than the expected size..\n");
 			return -ENOMEM;
 		}

drivers/staging/media/atomisp/pci/atomisp_cmd.c

@@ -21,6 +21,7 @@
 #include <linux/firmware.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/kfifo.h>
 #include <linux/pm_runtime.h>
@@ -109,7 +110,7 @@ struct atomisp_acc_pipe *atomisp_to_acc_pipe(struct video_device *dev)
 
 static unsigned short atomisp_get_sensor_fps(struct atomisp_sub_device *asd)
 {
-	struct v4l2_subdev_frame_interval fi;
+	struct v4l2_subdev_frame_interval fi = { 0 };
 	struct atomisp_device *isp = asd->isp;
 
 	unsigned short fps = 0;
@@ -206,6 +207,7 @@ int atomisp_freq_scaling(struct atomisp_device *isp,
 			 enum atomisp_dfs_mode mode,
 			 bool force)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	/* FIXME! Only use subdev[0] status yet */
 	struct atomisp_sub_device *asd = &isp->asd[0];
 	const struct atomisp_dfs_config *dfs;
@@ -219,7 +221,7 @@ int atomisp_freq_scaling(struct atomisp_device *isp,
 		return -EINVAL;
 	}
 
-	if ((isp->pdev->device & ATOMISP_PCI_DEVICE_SOC_MASK) ==
+	if ((pdev->device & ATOMISP_PCI_DEVICE_SOC_MASK) ==
 	    ATOMISP_PCI_DEVICE_SOC_CHT && ATOMISP_USE_YUVPP(asd))
 		isp->dfs = &dfs_config_cht_soc;
 
@@ -357,39 +359,41 @@ static void clear_isp_irq(enum hrt_isp_css_irq irq)
 	irq_clear_all(IRQ0_ID);
 }
 
-void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev)
+void atomisp_msi_irq_init(struct atomisp_device *isp)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	u32 msg32;
 	u16 msg16;
 
-	pci_read_config_dword(dev, PCI_MSI_CAPID, &msg32);
+	pci_read_config_dword(pdev, PCI_MSI_CAPID, &msg32);
 	msg32 |= 1 << MSI_ENABLE_BIT;
-	pci_write_config_dword(dev, PCI_MSI_CAPID, msg32);
+	pci_write_config_dword(pdev, PCI_MSI_CAPID, msg32);
 
 	msg32 = (1 << INTR_IER) | (1 << INTR_IIR);
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, msg32);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg32);
 
-	pci_read_config_word(dev, PCI_COMMAND, &msg16);
+	pci_read_config_word(pdev, PCI_COMMAND, &msg16);
 	msg16 |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
 		  PCI_COMMAND_INTX_DISABLE);
-	pci_write_config_word(dev, PCI_COMMAND, msg16);
+	pci_write_config_word(pdev, PCI_COMMAND, msg16);
 }
 
-void atomisp_msi_irq_uninit(struct atomisp_device *isp, struct pci_dev *dev)
+void atomisp_msi_irq_uninit(struct atomisp_device *isp)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	u32 msg32;
 	u16 msg16;
 
-	pci_read_config_dword(dev, PCI_MSI_CAPID, &msg32);
+	pci_read_config_dword(pdev, PCI_MSI_CAPID, &msg32);
 	msg32 &=  ~(1 << MSI_ENABLE_BIT);
-	pci_write_config_dword(dev, PCI_MSI_CAPID, msg32);
+	pci_write_config_dword(pdev, PCI_MSI_CAPID, msg32);
 
 	msg32 = 0x0;
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, msg32);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg32);
 
-	pci_read_config_word(dev, PCI_COMMAND, &msg16);
+	pci_read_config_word(pdev, PCI_COMMAND, &msg16);
 	msg16 &= ~(PCI_COMMAND_MASTER);
-	pci_write_config_word(dev, PCI_COMMAND, msg16);
+	pci_write_config_word(pdev, PCI_COMMAND, msg16);
 }
 
 static void atomisp_sof_event(struct atomisp_sub_device *asd)
@@ -480,11 +484,12 @@ static void print_csi_rx_errors(enum mipi_port_id port,
 /* Clear irq reg */
 static void clear_irq_reg(struct atomisp_device *isp)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	u32 msg_ret;
 
-	pci_read_config_dword(isp->pdev, PCI_INTERRUPT_CTRL, &msg_ret);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &msg_ret);
 	msg_ret |= 1 << INTR_IIR;
-	pci_write_config_dword(isp->pdev, PCI_INTERRUPT_CTRL, msg_ret);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg_ret);
 }
 
 static struct atomisp_sub_device *
@@ -665,11 +670,10 @@ bool atomisp_buffers_queued_pipe(struct atomisp_video_pipe *pipe)
 void dump_sp_dmem(struct atomisp_device *isp, unsigned int addr,
 		  unsigned int size)
 {
-	u32 __iomem *io_virt_addr;
 	unsigned int data = 0;
 	unsigned int size32 = DIV_ROUND_UP(size, sizeof(u32));
 
-	dev_dbg(isp->dev, "atomisp_io_base:%p\n", atomisp_io_base);
+	dev_dbg(isp->dev, "atomisp mmio base: %p\n", isp->base);
 	dev_dbg(isp->dev, "%s, addr:0x%x, size: %d, size32: %d\n", __func__,
 		addr, size, size32);
 	if (size32 * 4 + addr > 0x4000) {
@@ -678,13 +682,12 @@ void dump_sp_dmem(struct atomisp_device *isp, unsigned int addr,
 		return;
 	}
 	addr += SP_DMEM_BASE;
-	io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	addr &= 0x003FFFFF;
 	do {
-		data = *io_virt_addr;
+		data = readl(isp->base + addr);
 		dev_dbg(isp->dev, "%s, \t [0x%x]:0x%x\n", __func__, addr, data);
-		io_virt_addr += sizeof(u32);
-		size32 -= 1;
-	} while (size32 > 0);
+		addr += sizeof(u32);
+	} while (--size32);
 }
 
 static struct videobuf_buffer *atomisp_css_frame_to_vbuf(
@@ -1289,6 +1292,7 @@ void atomisp_delayed_init_work(struct work_struct *work)
 
 static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	enum ia_css_pipe_id css_pipe_id;
 	bool stream_restart[MAX_STREAM_NUM] = {0};
 	bool depth_mode = false;
@@ -1372,8 +1376,8 @@ static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout)
 	clear_isp_irq(hrt_isp_css_irq_sp);
 
 	/* Set the SRSE to 3 before resetting */
-	pci_write_config_dword(isp->pdev, PCI_I_CONTROL, isp->saved_regs.i_control |
-			       MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK);
+	pci_write_config_dword(pdev, PCI_I_CONTROL,
+			       isp->saved_regs.i_control | MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK);
 
 	/* reset ISP and restore its state */
 	isp->isp_timeout = true;
@@ -6158,6 +6162,7 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
 /*Turn off ISP dphy */
 int atomisp_ospm_dphy_down(struct atomisp_device *isp)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	unsigned long flags;
 	u32 reg;
 
@@ -6179,9 +6184,9 @@ int atomisp_ospm_dphy_down(struct atomisp_device *isp)
 	 * MRFLD HW design need all CSI ports are disabled before
 	 * powering down the IUNIT.
 	 */
-	pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, &reg);
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, &reg);
 	reg |= MRFLD_ALL_CSI_PORTS_OFF_MASK;
-	pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, reg);
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, reg);
 	return 0;
 }
 

drivers/staging/media/atomisp/pci/atomisp_cmd.h

@@ -68,8 +68,8 @@ bool atomisp_buffers_queued_pipe(struct atomisp_video_pipe *pipe);
 /*
  * Interrupt functions
  */
-void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev);
-void atomisp_msi_irq_uninit(struct atomisp_device *isp, struct pci_dev *dev);
+void atomisp_msi_irq_init(struct atomisp_device *isp);
+void atomisp_msi_irq_uninit(struct atomisp_device *isp);
 void atomisp_wdt_work(struct work_struct *work);
 void atomisp_wdt(struct timer_list *t);
 void atomisp_setup_flash(struct atomisp_sub_device *asd);

drivers/staging/media/atomisp/pci/atomisp_compat.h

@@ -29,8 +29,6 @@ struct atomisp_sub_device;
 struct video_device;
 enum atomisp_input_stream_id;
 
-extern void __iomem *atomisp_io_base;
-
 struct atomisp_metadata_buf {
 	struct ia_css_metadata *metadata;
 	void *md_vptr;

drivers/staging/media/atomisp/pci/atomisp_compat_css20.c

@@ -33,13 +33,12 @@
 #include "atomisp_ioctl.h"
 #include "atomisp_acc.h"
 
-#include <asm/intel-mid.h>
-
 #include "ia_css_debug.h"
 #include "ia_css_isp_param.h"
 #include "sh_css_hrt.h"
 #include "ia_css_isys.h"
 
+#include <linux/io.h>
 #include <linux/pm_runtime.h>
 
 /* Assume max number of ACC stages */
@@ -69,92 +68,94 @@ struct bayer_ds_factor {
 
 static void atomisp_css2_hw_store_8(hrt_address addr, uint8_t data)
 {
-	s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&mmio_lock, flags);
-	*io_virt_addr = data;
+	writeb(data, isp->base + (addr & 0x003FFFFF));
 	spin_unlock_irqrestore(&mmio_lock, flags);
 }
 
 static void atomisp_css2_hw_store_16(hrt_address addr, uint16_t data)
 {
-	s16 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&mmio_lock, flags);
-	*io_virt_addr = data;
+	writew(data, isp->base + (addr & 0x003FFFFF));
 	spin_unlock_irqrestore(&mmio_lock, flags);
 }
 
 void atomisp_css2_hw_store_32(hrt_address addr, uint32_t data)
 {
-	s32 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&mmio_lock, flags);
-	*io_virt_addr = data;
+	writel(data, isp->base + (addr & 0x003FFFFF));
 	spin_unlock_irqrestore(&mmio_lock, flags);
 }
 
 static uint8_t atomisp_css2_hw_load_8(hrt_address addr)
 {
-	s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 	u8 ret;
 
 	spin_lock_irqsave(&mmio_lock, flags);
-	ret = *io_virt_addr;
+	ret = readb(isp->base + (addr & 0x003FFFFF));
 	spin_unlock_irqrestore(&mmio_lock, flags);
 	return ret;
 }
 
 static uint16_t atomisp_css2_hw_load_16(hrt_address addr)
 {
-	s16 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 	u16 ret;
 
 	spin_lock_irqsave(&mmio_lock, flags);
-	ret = *io_virt_addr;
+	ret = readw(isp->base + (addr & 0x003FFFFF));
 	spin_unlock_irqrestore(&mmio_lock, flags);
 	return ret;
 }
 
 static uint32_t atomisp_css2_hw_load_32(hrt_address addr)
 {
-	s32 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 	u32 ret;
 
 	spin_lock_irqsave(&mmio_lock, flags);
-	ret = *io_virt_addr;
+	ret = readl(isp->base + (addr & 0x003FFFFF));
 	spin_unlock_irqrestore(&mmio_lock, flags);
 	return ret;
 }
 
-static void atomisp_css2_hw_store(hrt_address addr,
-				  const void *from, uint32_t n)
+static void atomisp_css2_hw_store(hrt_address addr, const void *from, uint32_t n)
 {
-	s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 	unsigned int i;
 
+	addr &= 0x003FFFFF;
 	spin_lock_irqsave(&mmio_lock, flags);
-	for (i = 0; i < n; i++, io_virt_addr++, from++)
-		*io_virt_addr = *(s8 *)from;
+	for (i = 0; i < n; i++, from++)
+		writeb(*(s8 *)from, isp->base + addr + i);
+
 	spin_unlock_irqrestore(&mmio_lock, flags);
 }
 
 static void atomisp_css2_hw_load(hrt_address addr, void *to, uint32_t n)
 {
-	s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF);
+	struct atomisp_device *isp = dev_get_drvdata(atomisp_dev);
 	unsigned long flags;
 	unsigned int i;
 
+	addr &= 0x003FFFFF;
 	spin_lock_irqsave(&mmio_lock, flags);
-	for (i = 0; i < n; i++, to++, io_virt_addr++)
-		*(s8 *)to = *io_virt_addr;
+	for (i = 0; i < n; i++, to++)
+		*(s8 *)to = readb(isp->base + addr + i);
 	spin_unlock_irqrestore(&mmio_lock, flags);
 }
 
@@ -181,10 +182,10 @@ void atomisp_load_uint32(hrt_address addr, uint32_t *data)
 	*data = atomisp_css2_hw_load_32(addr);
 }
 
-static int hmm_get_mmu_base_addr(unsigned int *mmu_base_addr)
+static int hmm_get_mmu_base_addr(struct device *dev, unsigned int *mmu_base_addr)
 {
 	if (!sh_mmu_mrfld.get_pd_base) {
-		dev_err(atomisp_dev, "get mmu base address failed.\n");
+		dev_err(dev, "get mmu base address failed.\n");
 		return -EINVAL;
 	}
 
@@ -839,7 +840,7 @@ int atomisp_css_init(struct atomisp_device *isp)
 	int ret;
 	int err;
 
-	ret = hmm_get_mmu_base_addr(&mmu_base_addr);
+	ret = hmm_get_mmu_base_addr(isp->dev, &mmu_base_addr);
 	if (ret)
 		return ret;
 
@@ -941,7 +942,7 @@ int atomisp_css_resume(struct atomisp_device *isp)
 	unsigned int mmu_base_addr;
 	int ret;
 
-	ret = hmm_get_mmu_base_addr(&mmu_base_addr);
+	ret = hmm_get_mmu_base_addr(isp->dev, &mmu_base_addr);
 	if (ret) {
 		dev_err(isp->dev, "get base address error.\n");
 		return -EINVAL;
@@ -1966,8 +1967,7 @@ void atomisp_css_input_set_mode(struct atomisp_sub_device *asd,
 			true,
 			0x13000,
 			&size_mem_words) != 0) {
-			if (intel_mid_identify_cpu() ==
-			    INTEL_MID_CPU_CHIP_TANGIER)
+			if (IS_MRFD)
 				size_mem_words = CSS_MIPI_FRAME_BUFFER_SIZE_2;
 			else
 				size_mem_words = CSS_MIPI_FRAME_BUFFER_SIZE_1;
@@ -2414,13 +2414,13 @@ static void __configure_preview_pp_input(struct atomisp_sub_device *asd,
 	struct ia_css_resolution  *effective_res =
 		    &stream_config->input_config.effective_res;
 
-	const struct bayer_ds_factor bds_fct[] = {{2, 1}, {3, 2}, {5, 4} };
+	static const struct bayer_ds_factor bds_fct[] = {{2, 1}, {3, 2}, {5, 4} };
 	/*
 	 * BZ201033: YUV decimation factor of 4 causes couple of rightmost
 	 * columns to be shaded. Remove this factor to work around the CSS bug.
 	 * const unsigned int yuv_dec_fct[] = {4, 2};
 	 */
-	const unsigned int yuv_dec_fct[] = { 2 };
+	static const unsigned int yuv_dec_fct[] = { 2 };
 	unsigned int i;
 
 	if (width == 0 && height == 0)
@@ -2540,7 +2540,7 @@ static void __configure_video_pp_input(struct atomisp_sub_device *asd,
 	struct ia_css_resolution  *effective_res =
 		    &stream_config->input_config.effective_res;
 
-	const struct bayer_ds_factor bds_factors[] = {
+	static const struct bayer_ds_factor bds_factors[] = {
 		{8, 1}, {6, 1}, {4, 1}, {3, 1}, {2, 1}, {3, 2}
 	};
 	unsigned int i;
@@ -4337,7 +4337,7 @@ static const char * const fw_acc_type_name[] = {
 	[IA_CSS_ACC_STANDALONE] =	"Stand-alone acceleration",
 };
 
-int atomisp_css_dump_blob_infor(void)
+int atomisp_css_dump_blob_infor(struct atomisp_device *isp)
 {
 	struct ia_css_blob_descr *bd = sh_css_blob_info;
 	unsigned int i, nm = sh_css_num_binaries;
@@ -4354,8 +4354,7 @@ int atomisp_css_dump_blob_infor(void)
 	for (i = 0; i < sh_css_num_binaries - NUM_OF_SPS; i++) {
 		switch (bd[i].header.type) {
 		case ia_css_isp_firmware:
-			dev_dbg(atomisp_dev,
-				"Num%2d type %s (%s), binary id is %2d, name is %s\n",
+			dev_dbg(isp->dev, "Num%2d type %s (%s), binary id is %2d, name is %s\n",
 				i + NUM_OF_SPS,
 				fw_type_name[bd[i].header.type],
 				fw_acc_type_name[bd[i].header.info.isp.type],
@@ -4363,8 +4362,7 @@ int atomisp_css_dump_blob_infor(void)
 				bd[i].name);
 			break;
 		default:
-			dev_dbg(atomisp_dev,
-				"Num%2d type %s, name is %s\n",
+			dev_dbg(isp->dev, "Num%2d type %s, name is %s\n",
 				i + NUM_OF_SPS, fw_type_name[bd[i].header.type],
 				bd[i].name);
 		}

drivers/staging/media/atomisp/pci/atomisp_compat_css20.h

@@ -153,7 +153,7 @@ int atomisp_css_debug_dump_isp_binary(void);
 
 int atomisp_css_dump_sp_raw_copy_linecount(bool reduced);
 
-int atomisp_css_dump_blob_infor(void);
+int atomisp_css_dump_blob_infor(struct atomisp_device *isp);
 
 void atomisp_css_set_isp_config_id(struct atomisp_sub_device *asd,
 				   uint32_t isp_config_id);

drivers/staging/media/atomisp/pci/atomisp_drvfs.c

@@ -62,9 +62,9 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp,
 
 	if (opt & OPTION_VALID) {
 		if (opt & OPTION_BIN_LIST) {
-			ret = atomisp_css_dump_blob_infor();
+			ret = atomisp_css_dump_blob_infor(isp);
 			if (ret) {
-				dev_err(atomisp_dev, "%s dump blob infor err[ret:%d]\n",
+				dev_err(isp->dev, "%s dump blob infor err[ret:%d]\n",
 					__func__, ret);
 				goto opt_err;
 			}
@@ -76,7 +76,7 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp,
 				atomisp_css_debug_dump_isp_binary();
 			} else {
 				ret = -EPERM;
-				dev_err(atomisp_dev, "%s dump running bin err[ret:%d]\n",
+				dev_err(isp->dev, "%s dump running bin err[ret:%d]\n",
 					__func__, ret);
 				goto opt_err;
 			}
@@ -86,8 +86,7 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp,
 			hmm_show_mem_stat(__func__, __LINE__);
 	} else {
 		ret = -EINVAL;
-		dev_err(atomisp_dev, "%s dump nothing[ret=%d]\n", __func__,
-			ret);
+		dev_err(isp->dev, "%s dump nothing[ret=%d]\n", __func__, ret);
 	}
 
 opt_err:
@@ -185,8 +184,9 @@ static void iunit_drvfs_remove_files(struct device_driver *drv)
 		driver_remove_file(drv, &iunit_drvfs_attrs[i]);
 }
 
-int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp)
+int atomisp_drvfs_init(struct atomisp_device *isp)
 {
+	struct device_driver *drv = isp->dev->driver;
 	int ret;
 
 	iunit_debug.isp = isp;
@@ -194,7 +194,7 @@ int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp)
 
 	ret = iunit_drvfs_create_files(iunit_debug.drv);
 	if (ret) {
-		dev_err(atomisp_dev, "drvfs_create_files error: %d\n", ret);
+		dev_err(isp->dev, "drvfs_create_files error: %d\n", ret);
 		iunit_drvfs_remove_files(iunit_debug.drv);
 	}
 

drivers/staging/media/atomisp/pci/atomisp_drvfs.h

@@ -19,7 +19,7 @@
 #ifndef	__ATOMISP_DRVFS_H__
 #define	__ATOMISP_DRVFS_H__
 
-int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp);
+int atomisp_drvfs_init(struct atomisp_device *isp);
 void atomisp_drvfs_exit(void);
 
 #endif /* __ATOMISP_DRVFS_H__ */

drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c

@@ -26,6 +26,9 @@ enum clock_rate {
 #define CLK_RATE_19_2MHZ	19200000
 #define CLK_RATE_25_0MHZ	25000000
 
+/* Valid clock number range from 0 to 5 */
+#define MAX_CLK_COUNT                   5
+
 /* X-Powers AXP288 register set */
 #define ALDO1_SEL_REG	0x28
 #define ALDO1_CTRL3_REG	0x13
@@ -61,9 +64,7 @@ enum clock_rate {
 
 struct gmin_subdev {
 	struct v4l2_subdev *subdev;
-	int clock_num;
 	enum clock_rate clock_src;
-	bool clock_on;
 	struct clk *pmc_clk;
 	struct gpio_desc *gpio0;
 	struct gpio_desc *gpio1;
@@ -75,11 +76,16 @@ struct gmin_subdev {
 	unsigned int csi_lanes;
 	enum atomisp_input_format csi_fmt;
 	enum atomisp_bayer_order csi_bayer;
+
+	bool clock_on;
 	bool v1p8_on;
 	bool v2p8_on;
 	bool v1p2_on;
 	bool v2p8_vcm_on;
 
+	int v1p8_gpio;
+	int v2p8_gpio;
+
 	u8 pwm_i2c_addr;
 
 	/* For PMIC AXP */
@@ -90,9 +96,9 @@ struct gmin_subdev {
 static struct gmin_subdev gmin_subdevs[MAX_SUBDEVS];
 
 /* ACPI HIDs for the PMICs that could be used by this driver */
-#define PMIC_ACPI_AXP		"INT33F4:00"	/* XPower AXP288 PMIC */
-#define PMIC_ACPI_TI		"INT33F5:00"	/* Dollar Cove TI PMIC */
-#define PMIC_ACPI_CRYSTALCOVE	"INT33FD:00"	/* Crystal Cove PMIC */
+#define PMIC_ACPI_AXP		"INT33F4"	/* XPower AXP288 PMIC */
+#define PMIC_ACPI_TI		"INT33F5"	/* Dollar Cove TI PMIC */
+#define PMIC_ACPI_CRYSTALCOVE	"INT33FD"	/* Crystal Cove PMIC */
 
 #define PMIC_PLATFORM_TI	"intel_soc_pmic_chtdc_ti"
 
@@ -105,7 +111,7 @@ static enum {
 } pmic_id;
 
 static const char *pmic_name[] = {
-	[PMIC_UNSET]		= "unset",
+	[PMIC_UNSET]		= "ACPI device PM",
 	[PMIC_REGULATOR]	= "regulator driver",
 	[PMIC_AXP]		= "XPower AXP288 PMIC",
 	[PMIC_TI]		= "Dollar Cove TI PMIC",
@@ -119,24 +125,6 @@ static const struct atomisp_platform_data pdata = {
 	.subdevs = pdata_subdevs,
 };
 
-/*
- * Something of a hack.  The ECS E7 board drives camera 2.8v from an
- * external regulator instead of the PMIC.  There's a gmin_CamV2P8
- * config variable that specifies the GPIO to handle this particular
- * case, but this needs a broader architecture for handling camera
- * power.
- */
-enum { V2P8_GPIO_UNSET = -2, V2P8_GPIO_NONE = -1 };
-static int v2p8_gpio = V2P8_GPIO_UNSET;
-
-/*
- * Something of a hack. The CHT RVP board drives camera 1.8v from an
- * external regulator instead of the PMIC just like ECS E7 board, see the
- * comments above.
- */
-enum { V1P8_GPIO_UNSET = -2, V1P8_GPIO_NONE = -1 };
-static int v1p8_gpio = V1P8_GPIO_UNSET;
-
 static LIST_HEAD(vcm_devices);
 static DEFINE_MUTEX(vcm_lock);
 
@@ -199,6 +187,8 @@ int atomisp_register_i2c_module(struct v4l2_subdev *subdev,
 	 * gmin_subdev struct is already initialized for us.
 	 */
 	gs = find_gmin_subdev(subdev);
+	if (!gs)
+		return -ENODEV;
 
 	pdata.subdevs[i].type = type;
 	pdata.subdevs[i].port = gs->csi_port;
@@ -294,6 +284,7 @@ static struct gmin_cfg_var mrd7_vars[] = {
 	{"INT33F8:00_CsiFmt", "13"},
 	{"INT33F8:00_CsiBayer", "0"},
 	{"INT33F8:00_CamClk", "0"},
+
 	{"INT33F9:00_CamType", "1"},
 	{"INT33F9:00_CsiPort", "0"},
 	{"INT33F9:00_CsiLanes", "1"},
@@ -309,6 +300,7 @@ static struct gmin_cfg_var ecs7_vars[] = {
 	{"INT33BE:00_CsiFmt", "13"},
 	{"INT33BE:00_CsiBayer", "2"},
 	{"INT33BE:00_CamClk", "0"},
+
 	{"INT33F0:00_CsiPort", "0"},
 	{"INT33F0:00_CsiLanes", "1"},
 	{"INT33F0:00_CsiFmt", "13"},
@@ -322,6 +314,7 @@ static struct gmin_cfg_var i8880_vars[] = {
 	{"XXOV2680:00_CsiPort", "1"},
 	{"XXOV2680:00_CsiLanes", "1"},
 	{"XXOV2680:00_CamClk", "0"},
+
 	{"XXGC0310:00_CsiPort", "0"},
 	{"XXGC0310:00_CsiLanes", "1"},
 	{"XXGC0310:00_CamClk", "1"},
@@ -381,34 +374,27 @@ static const guid_t atomisp_dsm_guid = GUID_INIT(0xdc2f6c4f, 0x045b, 0x4f1d,
 #define GMIN_PMC_CLK_NAME 14 /* "pmc_plt_clk_[0..5]" */
 static char gmin_pmc_clk_name[GMIN_PMC_CLK_NAME];
 
-static int gmin_i2c_match_one(struct device *dev, const void *data)
-{
-	const char *name = data;
-	struct i2c_client *client;
-
-	if (dev->type != &i2c_client_type)
-		return 0;
-
-	client = to_i2c_client(dev);
-
-	return (!strcmp(name, client->name));
-}
-
 static struct i2c_client *gmin_i2c_dev_exists(struct device *dev, char *name,
 					      struct i2c_client **client)
 {
+	struct acpi_device *adev;
 	struct device *d;
 
-	while ((d = bus_find_device(&i2c_bus_type, NULL, name,
-				    gmin_i2c_match_one))) {
-		*client = to_i2c_client(d);
-		dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n",
-			(*client)->name, (*client)->addr,
-			(*client)->adapter->nr);
-		return *client;
-	}
+	adev = acpi_dev_get_first_match_dev(name, NULL, -1);
+	if (!adev)
+		return NULL;
 
+	d = bus_find_device_by_acpi_dev(&i2c_bus_type, adev);
+	acpi_dev_put(adev);
+	if (!d)
 		return NULL;
+
+	*client = i2c_verify_client(d);
+	put_device(d);
+
+	dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n",
+		(*client)->name, (*client)->addr, (*client)->adapter->nr);
+	return *client;
 }
 
 static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg,
@@ -427,45 +413,80 @@ static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg,
 		"I2C write, addr: 0x%02x, reg: 0x%02x, value: 0x%02x, mask: 0x%02x\n",
 		i2c_addr, reg, value, mask);
 
-	ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_addr, reg,
-							value, mask);
-
-	if (ret == -EOPNOTSUPP) {
+	ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_addr, reg, value, mask);
+	if (ret == -EOPNOTSUPP)
 		dev_err(dev,
 			"ACPI didn't mapped the OpRegion needed to access I2C address 0x%02x.\n"
-			"Need to compile the Kernel using CONFIG_*_PMIC_OPREGION settings\n",
+			"Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings\n",
 			i2c_addr);
-		return ret;
-	}
 
 	return ret;
 }
 
-static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
+static int atomisp_get_acpi_power(struct device *dev)
 {
-	struct i2c_client *power = NULL, *client = v4l2_get_subdevdata(subdev);
-	struct acpi_device *adev;
-	acpi_handle handle;
-	struct device *dev;
-	int i, ret;
+	char name[5];
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer b_name = { sizeof(name), name };
+	union acpi_object *package, *element;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	acpi_handle rhandle;
+	acpi_status status;
+	int clock_num = -1;
+	int i;
 
-	if (!client)
-		return NULL;
+	status = acpi_evaluate_object(handle, "_PR0", NULL, &buffer);
+	if (!ACPI_SUCCESS(status))
+		return -1;
 
-	dev = &client->dev;
+	package = buffer.pointer;
 
-	handle = ACPI_HANDLE(dev);
+	if (!buffer.length || !package
+	    || package->type != ACPI_TYPE_PACKAGE
+	    || !package->package.count)
+		goto fail;
 
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(dev, "Error could not get ACPI device\n");
-		return NULL;
+	for (i = 0; i < package->package.count; i++) {
+		element = &package->package.elements[i];
+
+		if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
+			continue;
+
+		rhandle = element->reference.handle;
+		if (!rhandle)
+			goto fail;
+
+		acpi_get_name(rhandle, ACPI_SINGLE_NAME, &b_name);
+
+		dev_dbg(dev, "Found PM resource '%s'\n", name);
+		if (strlen(name) == 4 && !strncmp(name, "CLK", 3)) {
+			if (name[3] >= '0' && name[3] <= '4')
+				clock_num = name[3] - '0';
+#if 0
+			/*
+			 * We could abort here, but let's parse all resources,
+			 * as this is helpful for debugging purposes
+			 */
+			if (clock_num >= 0)
+				break;
+#endif
+		}
 	}
 
-	dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
+fail:
+	ACPI_FREE(buffer.pointer);
+
+	return clock_num;
+}
+
+static u8 gmin_get_pmic_id_and_addr(struct device *dev)
+{
+	struct i2c_client *power;
+	static u8 pmic_i2c_addr;
+
+	if (pmic_id)
+		return pmic_i2c_addr;
 
-	if (!pmic_id) {
 	if (gmin_i2c_dev_exists(dev, PMIC_ACPI_TI, &power))
 		pmic_id = PMIC_TI;
 	else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_AXP, &power))
@@ -474,47 +495,140 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
 		pmic_id = PMIC_CRYSTALCOVE;
 	else
 		pmic_id = PMIC_REGULATOR;
-	}
 
-	for (i = 0; i < MAX_SUBDEVS && gmin_subdevs[i].subdev; i++)
-		;
-	if (i >= MAX_SUBDEVS)
-		return NULL;
+	pmic_i2c_addr = power ? power->addr : 0;
+	return pmic_i2c_addr;
+}
 
-	if (power) {
-		gmin_subdevs[i].pwm_i2c_addr = power->addr;
-		dev_info(dev,
-			 "gmin: power management provided via %s (i2c addr 0x%02x)\n",
-			 pmic_name[pmic_id], power->addr);
-	} else {
-		dev_info(dev, "gmin: power management provided via %s\n",
-			 pmic_name[pmic_id]);
-	}
+static int gmin_detect_pmic(struct v4l2_subdev *subdev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct device *dev = &client->dev;
+	u8 pmic_i2c_addr;
+
+	pmic_i2c_addr = gmin_get_pmic_id_and_addr(dev);
+	dev_info(dev, "gmin: power management provided via %s (i2c addr 0x%02x)\n",
+		 pmic_name[pmic_id], pmic_i2c_addr);
+	return pmic_i2c_addr;
+}
+
+static int gmin_subdev_add(struct gmin_subdev *gs)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(gs->subdev);
+	struct device *dev = &client->dev;
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	int ret, clock_num = -1;
+
+	dev_info(dev, "%s: ACPI path is %pfw\n", __func__, dev_fwnode(dev));
 
-	gmin_subdevs[i].subdev = subdev;
-	gmin_subdevs[i].clock_num = gmin_get_var_int(dev, false, "CamClk", 0);
 	/*WA:CHT requires XTAL clock as PLL is not stable.*/
-	gmin_subdevs[i].clock_src = gmin_get_var_int(dev, false, "ClkSrc",
+	gs->clock_src = gmin_get_var_int(dev, false, "ClkSrc",
 				         VLV2_CLK_PLL_19P2MHZ);
-	gmin_subdevs[i].csi_port = gmin_get_var_int(dev, false, "CsiPort", 0);
-	gmin_subdevs[i].csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1);
 
-	/* get PMC clock with clock framework */
-	snprintf(gmin_pmc_clk_name,
-		 sizeof(gmin_pmc_clk_name),
-		 "%s_%d", "pmc_plt_clk", gmin_subdevs[i].clock_num);
+	gs->csi_port = gmin_get_var_int(dev, false, "CsiPort", 0);
+	gs->csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1);
 
-	gmin_subdevs[i].pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name);
-	if (IS_ERR(gmin_subdevs[i].pmc_clk)) {
-		ret = PTR_ERR(gmin_subdevs[i].pmc_clk);
+	gs->gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW);
+	if (IS_ERR(gs->gpio0))
+		gs->gpio0 = NULL;
+	else
+		dev_info(dev, "will handle gpio0 via ACPI\n");
 
-		dev_err(dev,
-			"Failed to get clk from %s : %d\n",
-			gmin_pmc_clk_name,
-			ret);
+	gs->gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW);
+	if (IS_ERR(gs->gpio1))
+		gs->gpio1 = NULL;
+	else
+		dev_info(dev, "will handle gpio1 via ACPI\n");
 
-		return NULL;
+	/*
+	 * Those are used only when there is an external regulator apart
+	 * from the PMIC that would be providing power supply, like on the
+	 * two cases below:
+	 *
+	 * The ECS E7 board drives camera 2.8v from an external regulator
+	 * instead of the PMIC.  There's a gmin_CamV2P8 config variable
+	 * that specifies the GPIO to handle this particular case,
+	 * but this needs a broader architecture for handling camera power.
+	 *
+	 * The CHT RVP board drives camera 1.8v from an* external regulator
+	 * instead of the PMIC just like ECS E7 board.
+	 */
+
+	gs->v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1);
+	gs->v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1);
+
+	/*
+	 * FIXME:
+	 *
+	 * The ACPI handling code checks for the _PR? tables in order to
+	 * know what is required to switch the device from power state
+	 * D0 (_PR0) up to D3COLD (_PR3).
+	 *
+	 * The adev->flags.power_manageable is set to true if the device
+	 * has a _PR0 table, which can be checked by calling
+	 * acpi_device_power_manageable(adev).
+	 *
+	 * However, this only says that the device can be set to power off
+	 * mode.
+	 *
+	 * At least on the DSDT tables we've seen so far, there's no _PR3,
+	 * nor _PS3 (which would have a somewhat similar effect).
+	 * So, using ACPI for power management won't work, except if adding
+	 * an ACPI override logic somewhere.
+	 *
+	 * So, at least for the existing devices we know, the check below
+	 * will always be false.
+	 */
+	if (acpi_device_can_wakeup(adev) &&
+	    acpi_device_can_poweroff(adev)) {
+		dev_info(dev,
+			 "gmin: power management provided via device PM\n");
+		return 0;
+	}
+
+	/*
+	 * The code below is here due to backward compatibility with devices
+	 * whose ACPI BIOS may not contain everything that would be needed
+	 * in order to set clocks and do power management.
+	 */
+
+	/*
+	 * According with :
+	 *   https://github.com/projectceladon/hardware-intel-kernelflinger/blob/master/doc/fastboot.md
+	 *
+	 * The "CamClk" EFI var is set via fastboot on some Android devices,
+	 * and seems to contain the number of the clock used to feed the
+	 * sensor.
+	 *
+	 * On systems with a proper ACPI table, this is given via the _PR0
+	 * power resource table. The logic below should first check if there
+	 * is a power resource already, falling back to the EFI vars detection
+	 * otherwise.
+	 */
+
+	/* Try first to use ACPI to get the clock resource */
+	if (acpi_device_power_manageable(adev))
+		clock_num = atomisp_get_acpi_power(dev);
+
+	/* Fall-back use EFI and/or DMI match */
+	if (clock_num < 0)
+		clock_num = gmin_get_var_int(dev, false, "CamClk", 0);
+
+	if (clock_num < 0 || clock_num > MAX_CLK_COUNT) {
+		dev_err(dev, "Invalid clock number\n");
+		return -EINVAL;
+	}
+
+	snprintf(gmin_pmc_clk_name, sizeof(gmin_pmc_clk_name),
+		 "%s_%d", "pmc_plt_clk", clock_num);
+
+	gs->pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name);
+	if (IS_ERR(gs->pmc_clk)) {
+		ret = PTR_ERR(gs->pmc_clk);
+		dev_err(dev, "Failed to get clk from %s: %d\n", gmin_pmc_clk_name, ret);
+		return ret;
 	}
+	dev_info(dev, "Will use CLK%d (%s)\n", clock_num, gmin_pmc_clk_name);
 
 	/*
 	 * The firmware might enable the clock at
@@ -526,25 +640,17 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
 	 * to disable a clock that has not been enabled,
 	 * we need to enable the clock first.
 	 */
-	ret = clk_prepare_enable(gmin_subdevs[i].pmc_clk);
+	ret = clk_prepare_enable(gs->pmc_clk);
 	if (!ret)
-		clk_disable_unprepare(gmin_subdevs[i].pmc_clk);
-
-	gmin_subdevs[i].gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW);
-	if (IS_ERR(gmin_subdevs[i].gpio0))
-		gmin_subdevs[i].gpio0 = NULL;
-
-	gmin_subdevs[i].gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW);
-	if (IS_ERR(gmin_subdevs[i].gpio1))
-		gmin_subdevs[i].gpio1 = NULL;
+		clk_disable_unprepare(gs->pmc_clk);
 
 	switch (pmic_id) {
 	case PMIC_REGULATOR:
-		gmin_subdevs[i].v1p8_reg = regulator_get(dev, "V1P8SX");
-		gmin_subdevs[i].v2p8_reg = regulator_get(dev, "V2P8SX");
+		gs->v1p8_reg = regulator_get(dev, "V1P8SX");
+		gs->v2p8_reg = regulator_get(dev, "V2P8SX");
 
-		gmin_subdevs[i].v1p2_reg = regulator_get(dev, "V1P2A");
-		gmin_subdevs[i].v2p8_vcm_reg = regulator_get(dev, "VPROG4B");
+		gs->v1p2_reg = regulator_get(dev, "V1P2A");
+		gs->v2p8_vcm_reg = regulator_get(dev, "VPROG4B");
 
 		/* Note: ideally we would initialize v[12]p8_on to the
 		 * output of regulator_is_enabled(), but sadly that
@@ -556,32 +662,31 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev)
 		break;
 
 	case PMIC_AXP:
-		gmin_subdevs[i].eldo1_1p8v = gmin_get_var_int(dev, false,
+		gs->eldo1_1p8v = gmin_get_var_int(dev, false,
 						  "eldo1_1p8v",
 						  ELDO1_1P8V);
-		gmin_subdevs[i].eldo1_sel_reg = gmin_get_var_int(dev, false,
+		gs->eldo1_sel_reg = gmin_get_var_int(dev, false,
 						     "eldo1_sel_reg",
 						     ELDO1_SEL_REG);
-		gmin_subdevs[i].eldo1_ctrl_shift = gmin_get_var_int(dev, false,
+		gs->eldo1_ctrl_shift = gmin_get_var_int(dev, false,
 							"eldo1_ctrl_shift",
 							ELDO1_CTRL_SHIFT);
-		gmin_subdevs[i].eldo2_1p8v = gmin_get_var_int(dev, false,
+		gs->eldo2_1p8v = gmin_get_var_int(dev, false,
 						  "eldo2_1p8v",
 						  ELDO2_1P8V);
-		gmin_subdevs[i].eldo2_sel_reg = gmin_get_var_int(dev, false,
+		gs->eldo2_sel_reg = gmin_get_var_int(dev, false,
 						     "eldo2_sel_reg",
 						     ELDO2_SEL_REG);
-		gmin_subdevs[i].eldo2_ctrl_shift = gmin_get_var_int(dev, false,
+		gs->eldo2_ctrl_shift = gmin_get_var_int(dev, false,
 							"eldo2_ctrl_shift",
 							ELDO2_CTRL_SHIFT);
-		gmin_subdevs[i].pwm_i2c_addr = power->addr;
 		break;
 
 	default:
 		break;
 	}
 
-	return &gmin_subdevs[i];
+	return 0;
 }
 
 static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev)
@@ -591,7 +696,17 @@ static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev)
 	for (i = 0; i < MAX_SUBDEVS; i++)
 		if (gmin_subdevs[i].subdev == subdev)
 			return &gmin_subdevs[i];
-	return gmin_subdev_add(subdev);
+	return NULL;
+}
+
+static struct gmin_subdev *find_free_gmin_subdev_slot(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < MAX_SUBDEVS; i++)
+		if (gmin_subdevs[i].subdev == NULL)
+			return &gmin_subdevs[i];
+	return NULL;
 }
 
 static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs,
@@ -700,32 +815,24 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on)
 {
 	struct gmin_subdev *gs = find_gmin_subdev(subdev);
 	int ret;
-	struct device *dev;
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
 	int value;
 
-	dev = &client->dev;
-
-	if (v1p8_gpio == V1P8_GPIO_UNSET) {
-		v1p8_gpio = gmin_get_var_int(dev, true,
-					     "V1P8GPIO", V1P8_GPIO_NONE);
-		if (v1p8_gpio != V1P8_GPIO_NONE) {
+	if (gs->v1p8_gpio >= 0) {
 		pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n",
-				v1p8_gpio);
-			ret = gpio_request(v1p8_gpio, "camera_v1p8_en");
+			gs->v1p8_gpio);
+		ret = gpio_request(gs->v1p8_gpio, "camera_v1p8_en");
 		if (!ret)
-				ret = gpio_direction_output(v1p8_gpio, 0);
+			ret = gpio_direction_output(gs->v1p8_gpio, 0);
 		if (ret)
 			pr_err("V1P8 GPIO initialization failed\n");
 	}
-	}
 
 	if (!gs || gs->v1p8_on == on)
 		return 0;
 	gs->v1p8_on = on;
 
-	if (v1p8_gpio >= 0)
-		gpio_set_value(v1p8_gpio, on);
+	if (gs->v1p8_gpio >= 0)
+		gpio_set_value(gs->v1p8_gpio, on);
 
 	if (gs->v1p8_reg) {
 		regulator_set_voltage(gs->v1p8_reg, 1800000, 1800000);
@@ -762,32 +869,24 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on)
 {
 	struct gmin_subdev *gs = find_gmin_subdev(subdev);
 	int ret;
-	struct device *dev;
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
 	int value;
 
-	dev = &client->dev;
-
-	if (v2p8_gpio == V2P8_GPIO_UNSET) {
-		v2p8_gpio = gmin_get_var_int(dev, true,
-					     "V2P8GPIO", V2P8_GPIO_NONE);
-		if (v2p8_gpio != V2P8_GPIO_NONE) {
+	if (gs->v2p8_gpio >= 0) {
 		pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n",
-				v2p8_gpio);
-			ret = gpio_request(v2p8_gpio, "camera_v2p8");
+			gs->v2p8_gpio);
+		ret = gpio_request(gs->v2p8_gpio, "camera_v2p8");
 		if (!ret)
-				ret = gpio_direction_output(v2p8_gpio, 0);
+			ret = gpio_direction_output(gs->v2p8_gpio, 0);
 		if (ret)
 			pr_err("V2P8 GPIO initialization failed\n");
 	}
-	}
 
 	if (!gs || gs->v2p8_on == on)
 		return 0;
 	gs->v2p8_on = on;
 
-	if (v2p8_gpio >= 0)
-		gpio_set_value(v2p8_gpio, on);
+	if (gs->v2p8_gpio >= 0)
+		gpio_set_value(gs->v2p8_gpio, on);
 
 	if (gs->v2p8_reg) {
 		regulator_set_voltage(gs->v2p8_reg, 2900000, 2900000);
@@ -819,6 +918,37 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on)
 	return -EINVAL;
 }
 
+static int gmin_acpi_pm_ctrl(struct v4l2_subdev *subdev, int on)
+{
+	int ret = 0;
+	struct gmin_subdev *gs = find_gmin_subdev(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(subdev);
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+
+	/* Use the ACPI power management to control it */
+	on = !!on;
+	if (gs->clock_on == on)
+		return 0;
+
+	dev_dbg(subdev->dev, "Setting power state to %s\n",
+		on ? "on" : "off");
+
+	if (on)
+		ret = acpi_device_set_power(adev,
+					    ACPI_STATE_D0);
+	else
+		ret = acpi_device_set_power(adev,
+					    ACPI_STATE_D3_COLD);
+
+	if (!ret)
+		gs->clock_on = on;
+	else
+		dev_err(subdev->dev, "Couldn't set power state to %s\n",
+			on ? "on" : "off");
+
+	return ret;
+}
+
 static int gmin_flisclk_ctrl(struct v4l2_subdev *subdev, int on)
 {
 	int ret = 0;
@@ -884,7 +1014,7 @@ static struct camera_vcm_control *gmin_get_vcm_ctrl(struct v4l2_subdev *subdev,
 	return NULL;
 }
 
-static struct camera_sensor_platform_data gmin_plat = {
+static struct camera_sensor_platform_data pmic_gmin_plat = {
 	.gpio0_ctrl = gmin_gpio0_ctrl,
 	.gpio1_ctrl = gmin_gpio1_ctrl,
 	.v1p8_ctrl = gmin_v1p8_ctrl,
@@ -895,17 +1025,36 @@ static struct camera_sensor_platform_data gmin_plat = {
 	.get_vcm_ctrl = gmin_get_vcm_ctrl,
 };
 
+static struct camera_sensor_platform_data acpi_gmin_plat = {
+	.gpio0_ctrl = gmin_gpio0_ctrl,
+	.gpio1_ctrl = gmin_gpio1_ctrl,
+	.v1p8_ctrl = gmin_acpi_pm_ctrl,
+	.v2p8_ctrl = gmin_acpi_pm_ctrl,
+	.v1p2_ctrl = gmin_acpi_pm_ctrl,
+	.flisclk_ctrl = gmin_acpi_pm_ctrl,
+	.csi_cfg = gmin_csi_cfg,
+	.get_vcm_ctrl = gmin_get_vcm_ctrl,
+};
+
 struct camera_sensor_platform_data *gmin_camera_platform_data(
     struct v4l2_subdev *subdev,
     enum atomisp_input_format csi_format,
     enum atomisp_bayer_order csi_bayer)
 {
-	struct gmin_subdev *gs = find_gmin_subdev(subdev);
+	u8 pmic_i2c_addr = gmin_detect_pmic(subdev);
+	struct gmin_subdev *gs;
 
+	gs = find_free_gmin_subdev_slot();
+	gs->subdev = subdev;
 	gs->csi_fmt = csi_format;
 	gs->csi_bayer = csi_bayer;
+	gs->pwm_i2c_addr = pmic_i2c_addr;
 
-	return &gmin_plat;
+	gmin_subdev_add(gs);
+	if (gs->pmc_clk)
+		return &pmic_gmin_plat;
+	else
+		return &acpi_gmin_plat;
 }
 EXPORT_SYMBOL_GPL(gmin_camera_platform_data);
 
@@ -957,12 +1106,28 @@ static int gmin_get_config_dsm_var(struct device *dev,
 	union acpi_object *obj, *cur = NULL;
 	int i;
 
+	/*
+	 * The data reported by "CamClk" seems to be either 0 or 1 at the
+	 * _DSM table.
+	 *
+	 * At the ACPI tables we looked so far, this is not related to the
+	 * actual clock source for the sensor, which is given by the
+	 * _PR0 ACPI table. So, ignore it, as otherwise this will be
+	 * set to a wrong value.
+	 */
+	if (!strcmp(var, "CamClk"))
+		return -EINVAL;
+
 	obj = acpi_evaluate_dsm(handle, &atomisp_dsm_guid, 0, 0, NULL);
 	if (!obj) {
 		dev_info_once(dev, "Didn't find ACPI _DSM table.\n");
 		return -EINVAL;
 	}
 
+	/* Return on unexpected object type */
+	if (obj->type != ACPI_TYPE_PACKAGE)
+		return -EINVAL;
+
 #if 0 /* Just for debugging purposes */
 	for (i = 0; i < obj->package.count; i++) {
 		union acpi_object *cur = &obj->package.elements[i];
@@ -1155,10 +1320,10 @@ EXPORT_SYMBOL_GPL(camera_sensor_csi);
  * trying.  The driver itself does direct calls to the PUNIT to manage
  * ISP power.
  */
-static void isp_pm_cap_fixup(struct pci_dev *dev)
+static void isp_pm_cap_fixup(struct pci_dev *pdev)
 {
-	dev_info(&dev->dev, "Disabling PCI power management on camera ISP\n");
-	dev->pm_cap = 0;
+	dev_info(&pdev->dev, "Disabling PCI power management on camera ISP\n");
+	pdev->pm_cap = 0;
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0f38, isp_pm_cap_fixup);
 

drivers/staging/media/atomisp/pci/atomisp_internal.h

@@ -216,12 +216,12 @@ struct atomisp_sw_contex {
  * ci device struct
  */
 struct atomisp_device {
-	struct pci_dev *pdev;
 	struct device *dev;
 	struct v4l2_device v4l2_dev;
 	struct media_device media_dev;
 	struct atomisp_platform_data *pdata;
 	void *mmu_l1_base;
+	void __iomem *base;
 	const struct firmware *firmware;
 
 	struct pm_qos_request pm_qos;

drivers/staging/media/atomisp/pci/atomisp_ioctl.c

@@ -549,8 +549,7 @@ static int atomisp_querycap(struct file *file, void *fh,
 
 	strscpy(cap->driver, DRIVER, sizeof(cap->driver));
 	strscpy(cap->card, CARD, sizeof(cap->card));
-	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
-		 pci_name(isp->pdev));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", dev_name(isp->dev));
 
 	return 0;
 }
@@ -1635,6 +1634,7 @@ static int atomisp_streamon(struct file *file, void *fh,
 	struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev);
 	struct atomisp_sub_device *asd = pipe->asd;
 	struct atomisp_device *isp = video_get_drvdata(vdev);
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	enum ia_css_pipe_id css_pipe_id;
 	unsigned int sensor_start_stream;
 	unsigned int wdt_duration = ATOMISP_ISP_TIMEOUT_DURATION;
@@ -1844,9 +1844,8 @@ static int atomisp_streamon(struct file *file, void *fh,
 	/* Enable the CSI interface on ANN B0/K0 */
 	if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 <<
 					    ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) {
-		pci_write_config_word(isp->pdev, MRFLD_PCI_CSI_CONTROL,
-				      isp->saved_regs.csi_control |
-				      MRFLD_PCI_CSI_CONTROL_CSI_READY);
+		pci_write_config_word(pdev, MRFLD_PCI_CSI_CONTROL,
+				      isp->saved_regs.csi_control | MRFLD_PCI_CSI_CONTROL_CSI_READY);
 	}
 
 	/* stream on the sensor */
@@ -1891,6 +1890,7 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
 {
 	struct video_device *vdev = video_devdata(file);
 	struct atomisp_device *isp = video_get_drvdata(vdev);
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev);
 	struct atomisp_sub_device *asd = pipe->asd;
 	struct atomisp_video_pipe *capture_pipe = NULL;
@@ -2076,9 +2076,8 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
 	/* Disable the CSI interface on ANN B0/K0 */
 	if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 <<
 					    ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) {
-		pci_write_config_word(isp->pdev, MRFLD_PCI_CSI_CONTROL,
-				      isp->saved_regs.csi_control &
-				      ~MRFLD_PCI_CSI_CONTROL_CSI_READY);
+		pci_write_config_word(pdev, MRFLD_PCI_CSI_CONTROL,
+				      isp->saved_regs.csi_control & ~MRFLD_PCI_CSI_CONTROL_CSI_READY);
 	}
 
 	if (atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, false))
@@ -2111,8 +2110,8 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
 		}
 
 		/* disable  PUNIT/ISP acknowlede/handshake - SRSE=3 */
-		pci_write_config_dword(isp->pdev, PCI_I_CONTROL, isp->saved_regs.i_control |
-				       MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK);
+		pci_write_config_dword(pdev, PCI_I_CONTROL,
+				       isp->saved_regs.i_control | MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK);
 		dev_err(isp->dev, "atomisp_reset");
 		atomisp_reset(isp);
 		for (i = 0; i < isp->num_of_streams; i++) {

drivers/staging/media/atomisp/pci/atomisp_v4l2.c

@@ -127,8 +127,6 @@ MODULE_PARM_DESC(pad_h, "extra data for ISP processing");
 
 struct device *atomisp_dev;
 
-void __iomem *atomisp_io_base;
-
 static const struct atomisp_freq_scaling_rule dfs_rules_merr[] = {
 	{
 		.width = ISP_FREQ_RULE_ANY,
@@ -512,30 +510,27 @@ void atomisp_acc_unregister(struct atomisp_acc_pipe *video)
 
 static int atomisp_save_iunit_reg(struct atomisp_device *isp)
 {
-	struct pci_dev *dev = isp->pdev;
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 
 	dev_dbg(isp->dev, "%s\n", __func__);
 
-	pci_read_config_word(dev, PCI_COMMAND, &isp->saved_regs.pcicmdsts);
+	pci_read_config_word(pdev, PCI_COMMAND, &isp->saved_regs.pcicmdsts);
 	/* isp->saved_regs.ispmmadr is set from the atomisp_pci_probe() */
-	pci_read_config_dword(dev, PCI_MSI_CAPID, &isp->saved_regs.msicap);
-	pci_read_config_dword(dev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr);
-	pci_read_config_word(dev, PCI_MSI_DATA,  &isp->saved_regs.msi_data);
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr);
-	pci_read_config_dword(dev, PCI_INTERRUPT_CTRL,
-			      &isp->saved_regs.interrupt_control);
-
-	pci_read_config_dword(dev, MRFLD_PCI_PMCS,
-			      &isp->saved_regs.pmcs);
+	pci_read_config_dword(pdev, PCI_MSI_CAPID, &isp->saved_regs.msicap);
+	pci_read_config_dword(pdev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr);
+	pci_read_config_word(pdev, PCI_MSI_DATA,  &isp->saved_regs.msi_data);
+	pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &isp->saved_regs.interrupt_control);
+
+	pci_read_config_dword(pdev, MRFLD_PCI_PMCS, &isp->saved_regs.pmcs);
 	/* Ensure read/write combining is enabled. */
-	pci_read_config_dword(dev, PCI_I_CONTROL,
-			      &isp->saved_regs.i_control);
+	pci_read_config_dword(pdev, PCI_I_CONTROL, &isp->saved_regs.i_control);
 	isp->saved_regs.i_control |=
 	    MRFLD_PCI_I_CONTROL_ENABLE_READ_COMBINING |
 	    MRFLD_PCI_I_CONTROL_ENABLE_WRITE_COMBINING;
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL,
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL,
 			      &isp->saved_regs.csi_access_viol);
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL,
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_RCOMP_CONTROL,
 			      &isp->saved_regs.csi_rcomp_config);
 	/*
 	 * Hardware bugs require setting CSI_HS_OVR_CLK_GATE_ON_UPDATE.
@@ -545,65 +540,58 @@ static int atomisp_save_iunit_reg(struct atomisp_device *isp)
 	 * is missed, and IUNIT can hang.
 	 * For both issues, setting this bit is a workaround.
 	 */
-	isp->saved_regs.csi_rcomp_config |=
-	    MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE;
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL,
+	isp->saved_regs.csi_rcomp_config |= MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE;
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL,
 			      &isp->saved_regs.csi_afe_dly);
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_CONTROL,
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL,
 			      &isp->saved_regs.csi_control);
 	if (isp->media_dev.hw_revision >=
 	    (ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT))
-		isp->saved_regs.csi_control |=
-		    MRFLD_PCI_CSI_CONTROL_PARPATHEN;
+		isp->saved_regs.csi_control |= MRFLD_PCI_CSI_CONTROL_PARPATHEN;
 	/*
 	 * On CHT CSI_READY bit should be enabled before stream on
 	 */
 	if (IS_CHT && (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 <<
 		       ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)))
-		isp->saved_regs.csi_control |=
-		    MRFLD_PCI_CSI_CONTROL_CSI_READY;
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL,
+		isp->saved_regs.csi_control |= MRFLD_PCI_CSI_CONTROL_CSI_READY;
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL,
 			      &isp->saved_regs.csi_afe_rcomp_config);
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL,
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_HS_CONTROL,
 			      &isp->saved_regs.csi_afe_hs_control);
-	pci_read_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL,
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_DEADLINE_CONTROL,
 			      &isp->saved_regs.csi_deadline_control);
 	return 0;
 }
 
 static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp)
 {
-	struct pci_dev *dev = isp->pdev;
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 
 	dev_dbg(isp->dev, "%s\n", __func__);
 
-	pci_write_config_word(dev, PCI_COMMAND, isp->saved_regs.pcicmdsts);
-	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
-			       isp->saved_regs.ispmmadr);
-	pci_write_config_dword(dev, PCI_MSI_CAPID, isp->saved_regs.msicap);
-	pci_write_config_dword(dev, PCI_MSI_ADDR, isp->saved_regs.msi_addr);
-	pci_write_config_word(dev, PCI_MSI_DATA, isp->saved_regs.msi_data);
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, isp->saved_regs.intr);
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL,
-			       isp->saved_regs.interrupt_control);
-	pci_write_config_dword(dev, PCI_I_CONTROL,
-			       isp->saved_regs.i_control);
-
-	pci_write_config_dword(dev, MRFLD_PCI_PMCS,
-			       isp->saved_regs.pmcs);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL,
+	pci_write_config_word(pdev, PCI_COMMAND, isp->saved_regs.pcicmdsts);
+	pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, isp->saved_regs.ispmmadr);
+	pci_write_config_dword(pdev, PCI_MSI_CAPID, isp->saved_regs.msicap);
+	pci_write_config_dword(pdev, PCI_MSI_ADDR, isp->saved_regs.msi_addr);
+	pci_write_config_word(pdev, PCI_MSI_DATA, isp->saved_regs.msi_data);
+	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, isp->saved_regs.intr);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, isp->saved_regs.interrupt_control);
+	pci_write_config_dword(pdev, PCI_I_CONTROL, isp->saved_regs.i_control);
+
+	pci_write_config_dword(pdev, MRFLD_PCI_PMCS, isp->saved_regs.pmcs);
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL,
 			       isp->saved_regs.csi_access_viol);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL,
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_RCOMP_CONTROL,
 			       isp->saved_regs.csi_rcomp_config);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL,
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL,
 			       isp->saved_regs.csi_afe_dly);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_CONTROL,
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL,
 			       isp->saved_regs.csi_control);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL,
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL,
 			       isp->saved_regs.csi_afe_rcomp_config);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL,
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_HS_CONTROL,
 			       isp->saved_regs.csi_afe_hs_control);
-	pci_write_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL,
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_DEADLINE_CONTROL,
 			       isp->saved_regs.csi_deadline_control);
 
 	/*
@@ -619,7 +607,7 @@ static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp)
 
 static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp)
 {
-	struct pci_dev *dev = isp->pdev;
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	u32 irq;
 	unsigned long flags;
 
@@ -635,11 +623,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp)
 	 * So, here we need to check if there is any pending
 	 * IRQ, if so, waiting for it to be served
 	 */
-	pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 	irq = irq & 1 << INTR_IIR;
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq);
 
-	pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 	if (!(irq & (1 << INTR_IIR)))
 		goto done;
 
@@ -652,11 +640,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp)
 		spin_unlock_irqrestore(&isp->lock, flags);
 		return -EAGAIN;
 	} else {
-		pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+		pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 		irq = irq & 1 << INTR_IIR;
-		pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq);
+		pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq);
 
-		pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+		pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 		if (!(irq & (1 << INTR_IIR))) {
 			atomisp_css2_hw_store_32(MRFLD_INTR_ENABLE_REG, 0x0);
 			goto done;
@@ -675,11 +663,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp)
 	* to IIR. It could block subsequent interrupt messages.
 	* HW sighting:4568410.
 	*/
-	pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 	irq &= ~(1 << INTR_IER);
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq);
 
-	atomisp_msi_irq_uninit(isp, dev);
+	atomisp_msi_irq_uninit(isp);
 	atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true);
 	spin_unlock_irqrestore(&isp->lock, flags);
 
@@ -755,7 +743,7 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
 
 		/* Wait until ISPSSPM0 bit[25:24] shows the right value */
 		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0, &tmp);
-		tmp = (tmp & MRFLD_ISPSSPM0_ISPSSC_MASK) >> MRFLD_ISPSSPM0_ISPSSS_OFFSET;
+		tmp = (tmp >> MRFLD_ISPSSPM0_ISPSSS_OFFSET) & MRFLD_ISPSSPM0_ISPSSC_MASK;
 		if (tmp == val) {
 			trace_ipu_cstate(enable);
 			return 0;
@@ -778,15 +766,13 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
 /* Workaround for pmu_nc_set_power_state not ready in MRFLD */
 int atomisp_mrfld_power_down(struct atomisp_device *isp)
 {
-// FIXME: at least with ISP2401, enabling this code causes the driver to break
-	return 0 && atomisp_mrfld_power(isp, false);
+	return atomisp_mrfld_power(isp, false);
 }
 
 /* Workaround for pmu_nc_set_power_state not ready in MRFLD */
 int atomisp_mrfld_power_up(struct atomisp_device *isp)
 {
-// FIXME: at least with ISP2401, enabling this code causes the driver to break
-	return 0 && atomisp_mrfld_power(isp, true);
+	return atomisp_mrfld_power(isp, true);
 }
 
 int atomisp_runtime_suspend(struct device *dev)
@@ -902,6 +888,7 @@ static int __maybe_unused atomisp_resume(struct device *dev)
 
 int atomisp_csi_lane_config(struct atomisp_device *isp)
 {
+	struct pci_dev *pdev = to_pci_dev(isp->dev);
 	static const struct {
 		u8 code;
 		u8 lanes[MRFLD_PORT_NUM];
@@ -1003,7 +990,7 @@ int atomisp_csi_lane_config(struct atomisp_device *isp)
 		return -EINVAL;
 	}
 
-	pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, &csi_control);
+	pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, &csi_control);
 	csi_control &= ~port_config_mask;
 	csi_control |= (portconfigs[i].code << MRFLD_PORT_CONFIGCODE_SHIFT)
 		       | (portconfigs[i].lanes[0] ? 0 : (1 << MRFLD_PORT1_ENABLE_SHIFT))
@@ -1013,7 +1000,7 @@ int atomisp_csi_lane_config(struct atomisp_device *isp)
 		       | (((1 << portconfigs[i].lanes[1]) - 1) << MRFLD_PORT2_LANES_SHIFT)
 		       | (((1 << portconfigs[i].lanes[2]) - 1) << port3_lanes_shift);
 
-	pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, csi_control);
+	pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, csi_control);
 
 	dev_dbg(isp->dev,
 		"%s: the portconfig is %d-%d-%d, CSI_CONTROL is 0x%08X\n",
@@ -1440,8 +1427,7 @@ atomisp_load_firmware(struct atomisp_device *isp)
  * Check for flags the driver was compiled with against the PCI
  * device. Always returns true on other than ISP 2400.
  */
-static bool is_valid_device(struct pci_dev *dev,
-			    const struct pci_device_id *id)
+static bool is_valid_device(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	unsigned int a0_max_id = 0;
 	const char *name;
@@ -1465,14 +1451,14 @@ static bool is_valid_device(struct pci_dev *dev,
 		name = "Cherrytrail";
 		break;
 	default:
-		dev_err(&dev->dev, "%s: unknown device ID %x04:%x04\n",
+		dev_err(&pdev->dev, "%s: unknown device ID %x04:%x04\n",
 			product, id->vendor, id->device);
 		return false;
 	}
 
-	if (dev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) {
-		dev_err(&dev->dev, "%s revision %d is not unsupported\n",
-			name, dev->revision);
+	if (pdev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) {
+		dev_err(&pdev->dev, "%s revision %d is not unsupported\n",
+			name, pdev->revision);
 		return false;
 	}
 
@@ -1483,22 +1469,20 @@ static bool is_valid_device(struct pci_dev *dev,
 
 #if defined(ISP2400)
 	if (IS_ISP2401) {
-		dev_err(&dev->dev, "Support for %s (ISP2401) was disabled at compile time\n",
+		dev_err(&pdev->dev, "Support for %s (ISP2401) was disabled at compile time\n",
 			name);
 		return false;
 	}
 #else
 	if (!IS_ISP2401) {
-		dev_err(&dev->dev, "Support for %s (ISP2400) was disabled at compile time\n",
+		dev_err(&pdev->dev, "Support for %s (ISP2400) was disabled at compile time\n",
 			name);
 		return false;
 	}
 #endif
 
-	dev_info(&dev->dev, "Detected %s version %d (ISP240%c) on %s\n",
-		name, dev->revision,
-		IS_ISP2401 ? '1' : '0',
-		product);
+	dev_info(&pdev->dev, "Detected %s version %d (ISP240%c) on %s\n",
+		 name, pdev->revision, IS_ISP2401 ? '1' : '0', product);
 
 	return true;
 }
@@ -1538,66 +1522,60 @@ static int init_atomisp_wdts(struct atomisp_device *isp)
 
 #define ATOM_ISP_PCI_BAR	0
 
-static int atomisp_pci_probe(struct pci_dev *dev,
-			     const struct pci_device_id *id)
+static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	const struct atomisp_platform_data *pdata;
 	struct atomisp_device *isp;
 	unsigned int start;
-	void __iomem *base;
 	int err, val;
 	u32 irq;
 
-	if (!is_valid_device(dev, id))
+	if (!is_valid_device(pdev, id))
 		return -ENODEV;
 
 	/* Pointer to struct device. */
-	atomisp_dev = &dev->dev;
+	atomisp_dev = &pdev->dev;
 
 	pdata = atomisp_get_platform_data();
 	if (!pdata)
-		dev_warn(&dev->dev, "no platform data available\n");
+		dev_warn(&pdev->dev, "no platform data available\n");
 
-	err = pcim_enable_device(dev);
+	err = pcim_enable_device(pdev);
 	if (err) {
-		dev_err(&dev->dev, "Failed to enable CI ISP device (%d)\n",
-			err);
+		dev_err(&pdev->dev, "Failed to enable CI ISP device (%d)\n", err);
 		return err;
 	}
 
-	start = pci_resource_start(dev, ATOM_ISP_PCI_BAR);
-	dev_dbg(&dev->dev, "start: 0x%x\n", start);
+	start = pci_resource_start(pdev, ATOM_ISP_PCI_BAR);
+	dev_dbg(&pdev->dev, "start: 0x%x\n", start);
 
-	err = pcim_iomap_regions(dev, 1 << ATOM_ISP_PCI_BAR, pci_name(dev));
+	err = pcim_iomap_regions(pdev, 1 << ATOM_ISP_PCI_BAR, pci_name(pdev));
 	if (err) {
-		dev_err(&dev->dev, "Failed to I/O memory remapping (%d)\n",
-			err);
+		dev_err(&pdev->dev, "Failed to I/O memory remapping (%d)\n", err);
 		goto ioremap_fail;
 	}
 
-	base = pcim_iomap_table(dev)[ATOM_ISP_PCI_BAR];
-	dev_dbg(&dev->dev, "base: %p\n", base);
-
-	atomisp_io_base = base;
-
-	dev_dbg(&dev->dev, "atomisp_io_base: %p\n", atomisp_io_base);
-
-	isp = devm_kzalloc(&dev->dev, sizeof(struct atomisp_device), GFP_KERNEL);
+	isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
 	if (!isp) {
 		err = -ENOMEM;
 		goto atomisp_dev_alloc_fail;
 	}
-	isp->pdev = dev;
-	isp->dev = &dev->dev;
+
+	isp->dev = &pdev->dev;
+	isp->base = pcim_iomap_table(pdev)[ATOM_ISP_PCI_BAR];
 	isp->sw_contex.power_state = ATOM_ISP_POWER_UP;
 	isp->saved_regs.ispmmadr = start;
 
+	dev_dbg(&pdev->dev, "atomisp mmio base: %p\n", isp->base);
+
 	rt_mutex_init(&isp->mutex);
 	mutex_init(&isp->streamoff_mutex);
 	spin_lock_init(&isp->lock);
 
 	/* This is not a true PCI device on SoC, so the delay is not needed. */
-	isp->pdev->d3_delay = 0;
+	pdev->d3_delay = 0;
+
+	pci_set_drvdata(pdev, isp);
 
 	switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) {
 	case ATOMISP_PCI_DEVICE_SOC_MRFLD:
@@ -1648,15 +1626,14 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 		 * have specs yet for exactly how it varies.  Default to
 		 * BYT-CR but let provisioning set it via EFI variable
 		 */
-		isp->hpll_freq = gmin_get_var_int(&dev->dev, false, "HpllFreq",
-						  HPLL_FREQ_2000MHZ);
+		isp->hpll_freq = gmin_get_var_int(&pdev->dev, false, "HpllFreq", HPLL_FREQ_2000MHZ);
 
 		/*
 		 * for BYT/CHT we are put isp into D3cold to avoid pci registers access
 		 * in power off. Set d3cold_delay to 0 since default 100ms is not
 		 * necessary.
 		 */
-		isp->pdev->d3cold_delay = 0;
+		pdev->d3cold_delay = 0;
 		break;
 	case ATOMISP_PCI_DEVICE_SOC_ANN:
 		isp->media_dev.hw_revision = (
@@ -1666,7 +1643,7 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 						 ATOMISP_HW_REVISION_ISP2401_LEGACY
 #endif
 						 << ATOMISP_HW_REVISION_SHIFT);
-		isp->media_dev.hw_revision |= isp->pdev->revision < 2 ?
+		isp->media_dev.hw_revision |= pdev->revision < 2 ?
 					      ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0;
 		isp->dfs = &dfs_config_merr;
 		isp->hpll_freq = HPLL_FREQ_1600MHZ;
@@ -1679,13 +1656,13 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 						 ATOMISP_HW_REVISION_ISP2401_LEGACY
 #endif
 						 << ATOMISP_HW_REVISION_SHIFT);
-		isp->media_dev.hw_revision |= isp->pdev->revision < 2 ?
+		isp->media_dev.hw_revision |= pdev->revision < 2 ?
 					      ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0;
 
 		isp->dfs = &dfs_config_cht;
-		isp->pdev->d3cold_delay = 0;
+		pdev->d3cold_delay = 0;
 
-		iosf_mbi_read(CCK_PORT, MBI_REG_READ, CCK_FUSE_REG_0, &val);
+		iosf_mbi_read(BT_MBI_UNIT_CCK, MBI_REG_READ, CCK_FUSE_REG_0, &val);
 		switch (val & CCK_FUSE_HPLL_FREQ_MASK) {
 		case 0x00:
 			isp->hpll_freq = HPLL_FREQ_800MHZ;
@@ -1698,18 +1675,16 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 			break;
 		default:
 			isp->hpll_freq = HPLL_FREQ_1600MHZ;
-			dev_warn(isp->dev,
-				 "read HPLL from cck failed. Default to 1600 MHz.\n");
+			dev_warn(&pdev->dev, "read HPLL from cck failed. Default to 1600 MHz.\n");
 		}
 		break;
 	default:
-		dev_err(&dev->dev, "un-supported IUNIT device\n");
+		dev_err(&pdev->dev, "un-supported IUNIT device\n");
 		err = -ENODEV;
 		goto atomisp_dev_alloc_fail;
 	}
 
-	dev_info(&dev->dev, "ISP HPLL frequency base = %d MHz\n",
-		 isp->hpll_freq);
+	dev_info(&pdev->dev, "ISP HPLL frequency base = %d MHz\n", isp->hpll_freq);
 
 	isp->max_isr_latency = ATOMISP_MAX_ISR_LATENCY;
 
@@ -1718,30 +1693,28 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 		isp->firmware = atomisp_load_firmware(isp);
 		if (!isp->firmware) {
 			err = -ENOENT;
-			dev_dbg(&dev->dev, "Firmware load failed\n");
+			dev_dbg(&pdev->dev, "Firmware load failed\n");
 			goto load_fw_fail;
 		}
 
-		err = sh_css_check_firmware_version(isp->dev,
-						    isp->firmware->data);
+		err = sh_css_check_firmware_version(isp->dev, isp->firmware->data);
 		if (err) {
-			dev_dbg(&dev->dev, "Firmware version check failed\n");
+			dev_dbg(&pdev->dev, "Firmware version check failed\n");
 			goto fw_validation_fail;
 		}
 	} else {
-		dev_info(&dev->dev, "Firmware load will be deferred\n");
+		dev_info(&pdev->dev, "Firmware load will be deferred\n");
 	}
 
-	pci_set_master(dev);
-	pci_set_drvdata(dev, isp);
+	pci_set_master(pdev);
 
-	err = pci_enable_msi(dev);
+	err = pci_enable_msi(pdev);
 	if (err) {
-		dev_err(&dev->dev, "Failed to enable msi (%d)\n", err);
+		dev_err(&pdev->dev, "Failed to enable msi (%d)\n", err);
 		goto enable_msi_fail;
 	}
 
-	atomisp_msi_irq_init(isp, dev);
+	atomisp_msi_irq_init(isp);
 
 	cpu_latency_qos_add_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE);
 
@@ -1762,8 +1735,7 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 		 * Workaround for imbalance data eye issue which is observed
 		 * on TNG B0.
 		 */
-		pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL,
-				      &csi_afe_trim);
+		pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, &csi_afe_trim);
 		csi_afe_trim &= ~((MRFLD_PCI_CSI_HSRXCLKTRIM_MASK <<
 				   MRFLD_PCI_CSI1_HSRXCLKTRIM_SHIFT) |
 				  (MRFLD_PCI_CSI_HSRXCLKTRIM_MASK <<
@@ -1776,20 +1748,18 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 				 MRFLD_PCI_CSI2_HSRXCLKTRIM_SHIFT) |
 				(MRFLD_PCI_CSI3_HSRXCLKTRIM <<
 				 MRFLD_PCI_CSI3_HSRXCLKTRIM_SHIFT);
-		pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL,
-				       csi_afe_trim);
+		pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, csi_afe_trim);
 	}
 
 	err = atomisp_initialize_modules(isp);
 	if (err < 0) {
-		dev_err(&dev->dev, "atomisp_initialize_modules (%d)\n", err);
+		dev_err(&pdev->dev, "atomisp_initialize_modules (%d)\n", err);
 		goto initialize_modules_fail;
 	}
 
 	err = atomisp_register_entities(isp);
 	if (err < 0) {
-		dev_err(&dev->dev, "atomisp_register_entities failed (%d)\n",
-			err);
+		dev_err(&pdev->dev, "atomisp_register_entities failed (%d)\n", err);
 		goto register_entities_fail;
 	}
 	err = atomisp_create_pads_links(isp);
@@ -1802,24 +1772,24 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 	/* save the iunit context only once after all the values are init'ed. */
 	atomisp_save_iunit_reg(isp);
 
-	pm_runtime_put_noidle(&dev->dev);
-	pm_runtime_allow(&dev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
 
 	hmm_init_mem_stat(repool_pgnr, dypool_enable, dypool_pgnr);
 	err = hmm_pool_register(repool_pgnr, HMM_POOL_TYPE_RESERVED);
 	if (err) {
-		dev_err(&dev->dev, "Failed to register reserved memory pool.\n");
+		dev_err(&pdev->dev, "Failed to register reserved memory pool.\n");
 		goto hmm_pool_fail;
 	}
 
 	/* Init ISP memory management */
 	hmm_init();
 
-	err = devm_request_threaded_irq(&dev->dev, dev->irq,
+	err = devm_request_threaded_irq(&pdev->dev, pdev->irq,
 					atomisp_isr, atomisp_isr_thread,
 					IRQF_SHARED, "isp_irq", isp);
 	if (err) {
-		dev_err(&dev->dev, "Failed to request irq (%d)\n", err);
+		dev_err(&pdev->dev, "Failed to request irq (%d)\n", err);
 		goto request_irq_fail;
 	}
 
@@ -1827,23 +1797,23 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 	if (!defer_fw_load) {
 		err = atomisp_css_load_firmware(isp);
 		if (err) {
-			dev_err(&dev->dev, "Failed to init css.\n");
+			dev_err(&pdev->dev, "Failed to init css.\n");
 			goto css_init_fail;
 		}
 	} else {
-		dev_dbg(&dev->dev, "Skip css init.\n");
+		dev_dbg(&pdev->dev, "Skip css init.\n");
 	}
 	/* Clear FW image from memory */
 	release_firmware(isp->firmware);
 	isp->firmware = NULL;
 	isp->css_env.isp_css_fw.data = NULL;
 
-	atomisp_drvfs_init(&dev->driver->driver, isp);
+	atomisp_drvfs_init(isp);
 
 	return 0;
 
 css_init_fail:
-	devm_free_irq(&dev->dev, dev->irq, isp);
+	devm_free_irq(&pdev->dev, pdev->irq, isp);
 request_irq_fail:
 	hmm_cleanup();
 	hmm_pool_unregister(HMM_POOL_TYPE_RESERVED);
@@ -1856,8 +1826,8 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 	atomisp_uninitialize_modules(isp);
 initialize_modules_fail:
 	cpu_latency_qos_remove_request(&isp->pm_qos);
-	atomisp_msi_irq_uninit(isp, dev);
-	pci_disable_msi(dev);
+	atomisp_msi_irq_uninit(isp);
+	pci_disable_msi(pdev);
 enable_msi_fail:
 fw_validation_fail:
 	release_firmware(isp->firmware);
@@ -1869,35 +1839,34 @@ static int atomisp_pci_probe(struct pci_dev *dev,
 	 * The following lines have been copied from atomisp suspend path
 	 */
 
-	pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 	irq = irq & 1 << INTR_IIR;
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq);
 
-	pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq);
+	pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq);
 	irq &= ~(1 << INTR_IER);
-	pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq);
+	pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq);
 
-	atomisp_msi_irq_uninit(isp, dev);
+	atomisp_msi_irq_uninit(isp);
 
 	atomisp_ospm_dphy_down(isp);
 
 	/* Address later when we worry about the ...field chips */
 	if (IS_ENABLED(CONFIG_PM) && atomisp_mrfld_power_down(isp))
-		dev_err(&dev->dev, "Failed to switch off ISP\n");
+		dev_err(&pdev->dev, "Failed to switch off ISP\n");
 
 atomisp_dev_alloc_fail:
-	pcim_iounmap_regions(dev, 1 << ATOM_ISP_PCI_BAR);
+	pcim_iounmap_regions(pdev, 1 << ATOM_ISP_PCI_BAR);
 
 ioremap_fail:
 	return err;
 }
 
-static void atomisp_pci_remove(struct pci_dev *dev)
+static void atomisp_pci_remove(struct pci_dev *pdev)
 {
-	struct atomisp_device *isp = (struct atomisp_device *)
-				     pci_get_drvdata(dev);
+	struct atomisp_device *isp = pci_get_drvdata(pdev);
 
-	dev_info(&dev->dev, "Removing atomisp driver\n");
+	dev_info(&pdev->dev, "Removing atomisp driver\n");
 
 	atomisp_drvfs_exit();
 
@@ -1906,11 +1875,11 @@ static void atomisp_pci_remove(struct pci_dev *dev)
 	ia_css_unload_firmware();
 	hmm_cleanup();
 
-	pm_runtime_forbid(&dev->dev);
-	pm_runtime_get_noresume(&dev->dev);
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	cpu_latency_qos_remove_request(&isp->pm_qos);
 
-	atomisp_msi_irq_uninit(isp, dev);
+	atomisp_msi_irq_uninit(isp);
 	atomisp_unregister_entities(isp);
 
 	destroy_workqueue(isp->wdt_work_queue);

drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c

@@ -48,7 +48,7 @@ static struct ia_css_refcount_entry *refcount_find_entry(ia_css_ptr ptr,
 		return NULL;
 	if (!myrefcount.items) {
 		ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR,
-				    "refcount_find_entry(): Ref count not initialized!\n");
+				    "%s(): Ref count not initialized!\n", __func__);
 		return NULL;
 	}
 
@@ -73,12 +73,12 @@ int ia_css_refcount_init(uint32_t size)
 
 	if (size == 0) {
 		ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-				    "ia_css_refcount_init(): Size of 0 for Ref count init!\n");
+				    "%s(): Size of 0 for Ref count init!\n", __func__);
 		return -EINVAL;
 	}
 	if (myrefcount.items) {
 		ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-				    "ia_css_refcount_init(): Ref count is already initialized\n");
+				    "%s(): Ref count is already initialized\n", __func__);
 		return -EINVAL;
 	}
 	myrefcount.items =
@@ -99,7 +99,7 @@ void ia_css_refcount_uninit(void)
 	u32 i;
 
 	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-			    "ia_css_refcount_uninit() entry\n");
+			    "%s() entry\n", __func__);
 	for (i = 0; i < myrefcount.size; i++) {
 		/* driver verifier tool has issues with &arr[i]
 		   and prefers arr + i; as these are actually equivalent
@@ -120,7 +120,7 @@ void ia_css_refcount_uninit(void)
 	myrefcount.items = NULL;
 	myrefcount.size = 0;
 	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-			    "ia_css_refcount_uninit() leave\n");
+			    "%s() leave\n", __func__);
 }
 
 ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr)
@@ -133,7 +133,7 @@ ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr)
 	entry = refcount_find_entry(ptr, false);
 
 	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-			    "ia_css_refcount_increment(%x) 0x%x\n", id, ptr);
+			    "%s(%x) 0x%x\n", __func__, id, ptr);
 
 	if (!entry) {
 		entry = refcount_find_entry(ptr, true);
@@ -145,7 +145,7 @@ ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr)
 
 	if (entry->id != id) {
 		ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR,
-				    "ia_css_refcount_increment(): Ref count IDS do not match!\n");
+				    "%s(): Ref count IDS do not match!\n", __func__);
 		return mmgr_NULL;
 	}
 
@@ -165,7 +165,7 @@ bool ia_css_refcount_decrement(s32 id, ia_css_ptr ptr)
 	struct ia_css_refcount_entry *entry;
 
 	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-			    "ia_css_refcount_decrement(%x) 0x%x\n", id, ptr);
+			    "%s(%x) 0x%x\n", __func__, id, ptr);
 
 	if (ptr == mmgr_NULL)
 		return false;
@@ -175,7 +175,7 @@ bool ia_css_refcount_decrement(s32 id, ia_css_ptr ptr)
 	if (entry) {
 		if (entry->id != id) {
 			ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR,
-					    "ia_css_refcount_decrement(): Ref count IDS do not match!\n");
+					    "%s(): Ref count IDS do not match!\n", __func__);
 			return false;
 		}
 		if (entry->count > 0) {
@@ -225,8 +225,8 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr)
 	u32 count = 0;
 
 	assert(clear_func_ptr);
-	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "ia_css_refcount_clear(%x)\n",
-			    id);
+	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "%s(%x)\n",
+			    __func__, id);
 
 	for (i = 0; i < myrefcount.size; i++) {
 		/* driver verifier tool has issues with &arr[i]
@@ -236,14 +236,14 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr)
 		entry = myrefcount.items + i;
 		if ((entry->data != mmgr_NULL) && (entry->id == id)) {
 			ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-					    "ia_css_refcount_clear: %x: 0x%x\n",
+					    "%s: %x: 0x%x\n", __func__,
 					    id, entry->data);
 			if (clear_func_ptr) {
 				/* clear using provided function */
 				clear_func_ptr(entry->data);
 			} else {
 				ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-						    "ia_css_refcount_clear: using hmm_free: no clear_func\n");
+						    "%s: using hmm_free: no clear_func\n", __func__);
 				hmm_free(entry->data);
 			}
 
@@ -260,7 +260,7 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr)
 		}
 	}
 	ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
-			    "ia_css_refcount_clear(%x): cleared %d\n", id,
+			    "%s(%x): cleared %d\n", __func__, id,
 			    count);
 }
 

drivers/staging/media/atomisp/pci/hive_types.h

@@ -52,32 +52,14 @@ typedef unsigned short       hive_uint16;
 typedef unsigned int         hive_uint32;
 typedef unsigned long long   hive_uint64;
 
-/* by default assume 32 bit master port (both data and address) */
-#ifndef HRT_DATA_WIDTH
 #define HRT_DATA_WIDTH	  32
-#endif
-#ifndef HRT_ADDRESS_WIDTH
-#define HRT_ADDRESS_WIDTH 32
-#endif
-
+#define HRT_ADDRESS_WIDTH 64
 #define HRT_DATA_BYTES    (HRT_DATA_WIDTH / 8)
 #define HRT_ADDRESS_BYTES (HRT_ADDRESS_WIDTH / 8)
+#define SIZEOF_HRT_REG    (HRT_DATA_WIDTH >> 3)
 
-#if HRT_DATA_WIDTH == 64
-typedef hive_uint64 hrt_data;
-#elif HRT_DATA_WIDTH == 32
 typedef hive_uint32 hrt_data;
-#else
-#error data width not supported
-#endif
-
-#if HRT_ADDRESS_WIDTH == 64
 typedef hive_uint64 hrt_address;
-#elif HRT_ADDRESS_WIDTH == 32
-typedef hive_uint32 hrt_address;
-#else
-#error adddres width not supported
-#endif
 
 /* use 64 bit addresses in simulation, where possible */
 typedef hive_uint64  hive_sim_address;

drivers/staging/media/atomisp/pci/hmm/hmm.c

@@ -735,7 +735,7 @@ ia_css_ptr hmm_host_vaddr_to_hrt_vaddr(const void *ptr)
 
 void hmm_show_mem_stat(const char *func, const int line)
 {
-	trace_printk("tol_cnt=%d usr_size=%d res_size=%d res_cnt=%d sys_size=%d  dyc_thr=%d dyc_size=%d.\n",
+	pr_info("tol_cnt=%d usr_size=%d res_size=%d res_cnt=%d sys_size=%d  dyc_thr=%d dyc_size=%d.\n",
 		hmm_mem_stat.tol_cnt,
 		hmm_mem_stat.usr_size, hmm_mem_stat.res_size,
 		hmm_mem_stat.res_cnt, hmm_mem_stat.sys_size,

drivers/staging/media/atomisp/pci/isp2400_system_global.h

@@ -13,306 +13,4 @@
  * more details.
  */
 
-#ifndef __SYSTEM_GLOBAL_H_INCLUDED__
-#define __SYSTEM_GLOBAL_H_INCLUDED__
-
-#include <hive_isp_css_defs.h>
-#include <type_support.h>
-
-/*
- * The longest allowed (uninteruptible) bus transfer, does not
- * take stalling into account
- */
-#define HIVE_ISP_MAX_BURST_LENGTH	1024
-
-/*
- * Maximum allowed burst length in words for the ISP DMA
- */
-#define ISP_DMA_MAX_BURST_LENGTH	128
-
-/*
- * Create a list of HAS and IS properties that defines the system
- *
- * The configuration assumes the following
- * - The system is hetereogeneous; Multiple cells and devices classes
- * - The cell and device instances are homogeneous, each device type
- *   belongs to the same class
- * - Device instances supporting a subset of the class capabilities are
- *   allowed
- *
- * We could manage different device classes through the enumerated
- * lists (C) or the use of classes (C++), but that is presently not
- * fully supported
- *
- * N.B. the 3 input formatters are of 2 different classess
- */
-
 #define USE_INPUT_SYSTEM_VERSION_2
-
-#define HAS_MMU_VERSION_2
-#define HAS_DMA_VERSION_2
-#define HAS_GDC_VERSION_2
-#define HAS_VAMEM_VERSION_2
-#define HAS_HMEM_VERSION_1
-#define HAS_BAMEM_VERSION_2
-#define HAS_IRQ_VERSION_2
-#define HAS_IRQ_MAP_VERSION_2
-#define HAS_INPUT_FORMATTER_VERSION_2
-/* 2401: HAS_INPUT_SYSTEM_VERSION_2401 */
-#define HAS_INPUT_SYSTEM_VERSION_2
-#define HAS_BUFFERED_SENSOR
-#define HAS_FIFO_MONITORS_VERSION_2
-/* #define HAS_GP_REGS_VERSION_2 */
-#define HAS_GP_DEVICE_VERSION_2
-#define HAS_GPIO_VERSION_1
-#define HAS_TIMED_CTRL_VERSION_1
-#define HAS_RX_VERSION_2
-
-#define DMA_DDR_TO_VAMEM_WORKAROUND
-#define DMA_DDR_TO_HMEM_WORKAROUND
-
-/*
- * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply
- */
-#define HRT_VADDRESS_WIDTH	32
-//#define HRT_ADDRESS_WIDTH	64		/* Surprise, this is a local property*/
-#define HRT_DATA_WIDTH		32
-
-#define SIZEOF_HRT_REG		(HRT_DATA_WIDTH >> 3)
-#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8)
-
-/* The main bus connecting all devices */
-#define HRT_BUS_WIDTH		HIVE_ISP_CTRL_DATA_WIDTH
-#define HRT_BUS_BYTES		HIVE_ISP_CTRL_DATA_BYTES
-
-/* per-frame parameter handling support */
-#define SH_CSS_ENABLE_PER_FRAME_PARAMS
-
-typedef u32			hrt_bus_align_t;
-
-/*
- * Enumerate the devices, device access through the API is by ID, through the DLI by address
- * The enumerator terminators are used to size the wiring arrays and as an exception value.
- */
-typedef enum {
-	DDR0_ID = 0,
-	N_DDR_ID
-} ddr_ID_t;
-
-typedef enum {
-	ISP0_ID = 0,
-	N_ISP_ID
-} isp_ID_t;
-
-typedef enum {
-	SP0_ID = 0,
-	N_SP_ID
-} sp_ID_t;
-
-typedef enum {
-	MMU0_ID = 0,
-	MMU1_ID,
-	N_MMU_ID
-} mmu_ID_t;
-
-typedef enum {
-	DMA0_ID = 0,
-	N_DMA_ID
-} dma_ID_t;
-
-typedef enum {
-	GDC0_ID = 0,
-	GDC1_ID,
-	N_GDC_ID
-} gdc_ID_t;
-
-#define N_GDC_ID_CPP 2 // this extra define is needed because we want to use it also in the preprocessor, and that doesn't work with enums.
-
-typedef enum {
-	VAMEM0_ID = 0,
-	VAMEM1_ID,
-	VAMEM2_ID,
-	N_VAMEM_ID
-} vamem_ID_t;
-
-typedef enum {
-	BAMEM0_ID = 0,
-	N_BAMEM_ID
-} bamem_ID_t;
-
-typedef enum {
-	HMEM0_ID = 0,
-	N_HMEM_ID
-} hmem_ID_t;
-
-/*
-typedef enum {
-	IRQ0_ID = 0,
-	N_IRQ_ID
-} irq_ID_t;
-*/
-
-typedef enum {
-	IRQ0_ID = 0,	// GP IRQ block
-	IRQ1_ID,		// Input formatter
-	IRQ2_ID,		// input system
-	IRQ3_ID,		// input selector
-	N_IRQ_ID
-} irq_ID_t;
-
-typedef enum {
-	FIFO_MONITOR0_ID = 0,
-	N_FIFO_MONITOR_ID
-} fifo_monitor_ID_t;
-
-/*
- * Deprecated: Since all gp_reg instances are different
- * and put in the address maps of other devices we cannot
- * enumerate them as that assumes the instrances are the
- * same.
- *
- * We define a single GP_DEVICE containing all gp_regs
- * w.r.t. a single base address
- *
-typedef enum {
-	GP_REGS0_ID = 0,
-	N_GP_REGS_ID
-} gp_regs_ID_t;
- */
-typedef enum {
-	GP_DEVICE0_ID = 0,
-	N_GP_DEVICE_ID
-} gp_device_ID_t;
-
-typedef enum {
-	GP_TIMER0_ID = 0,
-	GP_TIMER1_ID,
-	GP_TIMER2_ID,
-	GP_TIMER3_ID,
-	GP_TIMER4_ID,
-	GP_TIMER5_ID,
-	GP_TIMER6_ID,
-	GP_TIMER7_ID,
-	N_GP_TIMER_ID
-} gp_timer_ID_t;
-
-typedef enum {
-	GPIO0_ID = 0,
-	N_GPIO_ID
-} gpio_ID_t;
-
-typedef enum {
-	TIMED_CTRL0_ID = 0,
-	N_TIMED_CTRL_ID
-} timed_ctrl_ID_t;
-
-typedef enum {
-	INPUT_FORMATTER0_ID = 0,
-	INPUT_FORMATTER1_ID,
-	INPUT_FORMATTER2_ID,
-	INPUT_FORMATTER3_ID,
-	N_INPUT_FORMATTER_ID
-} input_formatter_ID_t;
-
-/* The IF RST is outside the IF */
-#define INPUT_FORMATTER0_SRST_OFFSET	0x0824
-#define INPUT_FORMATTER1_SRST_OFFSET	0x0624
-#define INPUT_FORMATTER2_SRST_OFFSET	0x0424
-#define INPUT_FORMATTER3_SRST_OFFSET	0x0224
-
-#define INPUT_FORMATTER0_SRST_MASK		0x0001
-#define INPUT_FORMATTER1_SRST_MASK		0x0002
-#define INPUT_FORMATTER2_SRST_MASK		0x0004
-#define INPUT_FORMATTER3_SRST_MASK		0x0008
-
-typedef enum {
-	INPUT_SYSTEM0_ID = 0,
-	N_INPUT_SYSTEM_ID
-} input_system_ID_t;
-
-typedef enum {
-	RX0_ID = 0,
-	N_RX_ID
-} rx_ID_t;
-
-enum mipi_port_id {
-	MIPI_PORT0_ID = 0,
-	MIPI_PORT1_ID,
-	MIPI_PORT2_ID,
-	N_MIPI_PORT_ID
-};
-
-#define	N_RX_CHANNEL_ID		4
-
-/* Generic port enumeration with an internal port type ID */
-typedef enum {
-	CSI_PORT0_ID = 0,
-	CSI_PORT1_ID,
-	CSI_PORT2_ID,
-	TPG_PORT0_ID,
-	PRBS_PORT0_ID,
-	FIFO_PORT0_ID,
-	MEMORY_PORT0_ID,
-	N_INPUT_PORT_ID
-} input_port_ID_t;
-
-typedef enum {
-	CAPTURE_UNIT0_ID = 0,
-	CAPTURE_UNIT1_ID,
-	CAPTURE_UNIT2_ID,
-	ACQUISITION_UNIT0_ID,
-	DMA_UNIT0_ID,
-	CTRL_UNIT0_ID,
-	GPREGS_UNIT0_ID,
-	FIFO_UNIT0_ID,
-	IRQ_UNIT0_ID,
-	N_SUB_SYSTEM_ID
-} sub_system_ID_t;
-
-#define	N_CAPTURE_UNIT_ID		3
-#define	N_ACQUISITION_UNIT_ID	1
-#define	N_CTRL_UNIT_ID			1
-
-enum ia_css_isp_memories {
-	IA_CSS_ISP_PMEM0 = 0,
-	IA_CSS_ISP_DMEM0,
-	IA_CSS_ISP_VMEM0,
-	IA_CSS_ISP_VAMEM0,
-	IA_CSS_ISP_VAMEM1,
-	IA_CSS_ISP_VAMEM2,
-	IA_CSS_ISP_HMEM0,
-	IA_CSS_SP_DMEM0,
-	IA_CSS_DDR,
-	N_IA_CSS_MEMORIES
-};
-
-#define IA_CSS_NUM_MEMORIES 9
-/* For driver compatibility */
-#define N_IA_CSS_ISP_MEMORIES   IA_CSS_NUM_MEMORIES
-#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES
-
-#if 0
-typedef enum {
-	dev_chn, /* device channels, external resource */
-	ext_mem, /* external memories */
-	int_mem, /* internal memories */
-	int_chn  /* internal channels, user defined */
-} resource_type_t;
-
-/* if this enum is extended with other memory resources, pls also extend the function resource_to_memptr() */
-typedef enum {
-	vied_nci_dev_chn_dma_ext0,
-	int_mem_vmem0,
-	int_mem_dmem0
-} resource_id_t;
-
-/* enum listing the different memories within a program group.
-   This enum is used in the mem_ptr_t type */
-typedef enum {
-	buf_mem_invalid = 0,
-	buf_mem_vmem_prog0,
-	buf_mem_dmem_prog0
-} buf_mem_t;
-
-#endif
-#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */

drivers/staging/media/atomisp/pci/isp2400_system_local.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Support for Intel Camera Imaging ISP subsystem.
- * Copyright (c) 2010-2015, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#ifndef __SYSTEM_LOCAL_H_INCLUDED__
-#define __SYSTEM_LOCAL_H_INCLUDED__
-
-#ifdef HRT_ISP_CSS_CUSTOM_HOST
-#ifndef HRT_USE_VIR_ADDRS
-#define HRT_USE_VIR_ADDRS
-#endif
-#endif
-
-#include "system_global.h"
-
-/* HRT assumes 32 by default (see Linux/include/hive_types.h), overrule it in case it is different */
-#undef HRT_ADDRESS_WIDTH
-#define HRT_ADDRESS_WIDTH	64		/* Surprise, this is a local property */
-
-/* This interface is deprecated */
-#include "hive_types.h"
-
-/*
- * Cell specific address maps
- */
-#if HRT_ADDRESS_WIDTH == 64
-
-#define GP_FIFO_BASE   ((hrt_address)0x0000000000090104)		/* This is NOT a base address */
-
-/* DDR */
-static const hrt_address DDR_BASE[N_DDR_ID] = {
-	(hrt_address)0x0000000120000000ULL
-};
-
-/* ISP */
-static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
-	(hrt_address)0x0000000000020000ULL
-};
-
-static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
-	(hrt_address)0x0000000000200000ULL
-};
-
-static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
-	(hrt_address)0x0000000000100000ULL
-};
-
-static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = {
-	(hrt_address)0x00000000001C0000ULL,
-	(hrt_address)0x00000000001D0000ULL,
-	(hrt_address)0x00000000001E0000ULL
-};
-
-static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = {
-	(hrt_address)0x00000000001F0000ULL
-};
-
-/* SP */
-static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
-	(hrt_address)0x0000000000010000ULL
-};
-
-static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
-	(hrt_address)0x0000000000300000ULL
-};
-
-static const hrt_address SP_PMEM_BASE[N_SP_ID] = {
-	(hrt_address)0x00000000000B0000ULL
-};
-
-/* MMU */
-/*
- * MMU0_ID: The data MMU
- * MMU1_ID: The icache MMU
- */
-static const hrt_address MMU_BASE[N_MMU_ID] = {
-	(hrt_address)0x0000000000070000ULL,
-	(hrt_address)0x00000000000A0000ULL
-};
-
-/* DMA */
-static const hrt_address DMA_BASE[N_DMA_ID] = {
-	(hrt_address)0x0000000000040000ULL
-};
-
-/* IRQ */
-static const hrt_address IRQ_BASE[N_IRQ_ID] = {
-	(hrt_address)0x0000000000000500ULL,
-	(hrt_address)0x0000000000030A00ULL,
-	(hrt_address)0x000000000008C000ULL,
-	(hrt_address)0x0000000000090200ULL
-};
-
-/*
-	(hrt_address)0x0000000000000500ULL};
- */
-
-/* GDC */
-static const hrt_address GDC_BASE[N_GDC_ID] = {
-	(hrt_address)0x0000000000050000ULL,
-	(hrt_address)0x0000000000060000ULL
-};
-
-/* FIFO_MONITOR (not a subset of GP_DEVICE) */
-static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
-	(hrt_address)0x0000000000000000ULL
-};
-
-/*
-static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = {
-	(hrt_address)0x0000000000000000ULL};
-
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
-	(hrt_address)0x0000000000090000ULL};
-*/
-
-/* GP_DEVICE (single base for all separate GP_REG instances) */
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
-	(hrt_address)0x0000000000000000ULL
-};
-
-/*GP TIMER , all timer registers are inter-twined,
- * so, having multiple base addresses for
- * different timers does not help*/
-static const hrt_address GP_TIMER_BASE =
-    (hrt_address)0x0000000000000600ULL;
-/* GPIO */
-static const hrt_address GPIO_BASE[N_GPIO_ID] = {
-	(hrt_address)0x0000000000000400ULL
-};
-
-/* TIMED_CTRL */
-static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
-	(hrt_address)0x0000000000000100ULL
-};
-
-/* INPUT_FORMATTER */
-static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
-	(hrt_address)0x0000000000030000ULL,
-	(hrt_address)0x0000000000030200ULL,
-	(hrt_address)0x0000000000030400ULL,
-	(hrt_address)0x0000000000030600ULL
-}; /* memcpy() */
-
-/* INPUT_SYSTEM */
-static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
-	(hrt_address)0x0000000000080000ULL
-};
-
-/*	(hrt_address)0x0000000000081000ULL, */ /* capture A */
-/*	(hrt_address)0x0000000000082000ULL, */ /* capture B */
-/*	(hrt_address)0x0000000000083000ULL, */ /* capture C */
-/*	(hrt_address)0x0000000000084000ULL, */ /* Acquisition */
-/*	(hrt_address)0x0000000000085000ULL, */ /* DMA */
-/*	(hrt_address)0x0000000000089000ULL, */ /* ctrl */
-/*	(hrt_address)0x000000000008A000ULL, */ /* GP regs */
-/*	(hrt_address)0x000000000008B000ULL, */ /* FIFO */
-/*	(hrt_address)0x000000000008C000ULL, */ /* IRQ */
-
-/* RX, the MIPI lane control regs start at offset 0 */
-static const hrt_address RX_BASE[N_RX_ID] = {
-	(hrt_address)0x0000000000080100ULL
-};
-
-#elif HRT_ADDRESS_WIDTH == 32
-
-#define GP_FIFO_BASE   ((hrt_address)0x00090104)		/* This is NOT a base address */
-
-/* DDR : Attention, this value not defined in 32-bit */
-static const hrt_address DDR_BASE[N_DDR_ID] = {
-	(hrt_address)0x00000000UL
-};
-
-/* ISP */
-static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
-	(hrt_address)0x00020000UL
-};
-
-static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
-	(hrt_address)0x00200000UL
-};
-
-static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
-	(hrt_address)0x100000UL
-};
-
-static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = {
-	(hrt_address)0xffffffffUL,
-	(hrt_address)0xffffffffUL,
-	(hrt_address)0xffffffffUL
-};
-
-static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = {
-	(hrt_address)0xffffffffUL
-};
-
-/* SP */
-static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
-	(hrt_address)0x00010000UL
-};
-
-static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
-	(hrt_address)0x00300000UL
-};
-
-static const hrt_address SP_PMEM_BASE[N_SP_ID] = {
-	(hrt_address)0x000B0000UL
-};
-
-/* MMU */
-/*
- * MMU0_ID: The data MMU
- * MMU1_ID: The icache MMU
- */
-static const hrt_address MMU_BASE[N_MMU_ID] = {
-	(hrt_address)0x00070000UL,
-	(hrt_address)0x000A0000UL
-};
-
-/* DMA */
-static const hrt_address DMA_BASE[N_DMA_ID] = {
-	(hrt_address)0x00040000UL
-};
-
-/* IRQ */
-static const hrt_address IRQ_BASE[N_IRQ_ID] = {
-	(hrt_address)0x00000500UL,
-	(hrt_address)0x00030A00UL,
-	(hrt_address)0x0008C000UL,
-	(hrt_address)0x00090200UL
-};
-
-/*
-	(hrt_address)0x00000500UL};
- */
-
-/* GDC */
-static const hrt_address GDC_BASE[N_GDC_ID] = {
-	(hrt_address)0x00050000UL,
-	(hrt_address)0x00060000UL
-};
-
-/* FIFO_MONITOR (not a subset of GP_DEVICE) */
-static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
-	(hrt_address)0x00000000UL
-};
-
-/*
-static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = {
-	(hrt_address)0x00000000UL};
-
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
-	(hrt_address)0x00090000UL};
-*/
-
-/* GP_DEVICE (single base for all separate GP_REG instances) */
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
-	(hrt_address)0x00000000UL
-};
-
-/*GP TIMER , all timer registers are inter-twined,
- * so, having multiple base addresses for
- * different timers does not help*/
-static const hrt_address GP_TIMER_BASE =
-    (hrt_address)0x00000600UL;
-
-/* GPIO */
-static const hrt_address GPIO_BASE[N_GPIO_ID] = {
-	(hrt_address)0x00000400UL
-};
-
-/* TIMED_CTRL */
-static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
-	(hrt_address)0x00000100UL
-};
-
-/* INPUT_FORMATTER */
-static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
-	(hrt_address)0x00030000UL,
-	(hrt_address)0x00030200UL,
-	(hrt_address)0x00030400UL
-};
-
-/*	(hrt_address)0x00030600UL, */ /* memcpy() */
-
-/* INPUT_SYSTEM */
-static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
-	(hrt_address)0x00080000UL
-};
-
-/*	(hrt_address)0x00081000UL, */ /* capture A */
-/*	(hrt_address)0x00082000UL, */ /* capture B */
-/*	(hrt_address)0x00083000UL, */ /* capture C */
-/*	(hrt_address)0x00084000UL, */ /* Acquisition */
-/*	(hrt_address)0x00085000UL, */ /* DMA */
-/*	(hrt_address)0x00089000UL, */ /* ctrl */
-/*	(hrt_address)0x0008A000UL, */ /* GP regs */
-/*	(hrt_address)0x0008B000UL, */ /* FIFO */
-/*	(hrt_address)0x0008C000UL, */ /* IRQ */
-
-/* RX, the MIPI lane control regs start at offset 0 */
-static const hrt_address RX_BASE[N_RX_ID] = {
-	(hrt_address)0x00080100UL
-};
-
-#else
-#error "system_local.h: HRT_ADDRESS_WIDTH must be one of {32,64}"
-#endif
-
-#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */

drivers/staging/media/atomisp/pci/isp2401_system_global.h

@@ -13,415 +13,7 @@
  * more details.
  */
 
-#ifndef __SYSTEM_GLOBAL_H_INCLUDED__
-#define __SYSTEM_GLOBAL_H_INCLUDED__
-
-#include <hive_isp_css_defs.h>
-#include <type_support.h>
-
-/*
- * The longest allowed (uninteruptible) bus transfer, does not
- * take stalling into account
- */
-#define HIVE_ISP_MAX_BURST_LENGTH	1024
-
-/*
- * Maximum allowed burst length in words for the ISP DMA
- * This value is set to 2 to prevent the ISP DMA from blocking
- * the bus for too long; as the input system can only buffer
- * 2 lines on Moorefield and Cherrytrail, the input system buffers
- * may overflow if blocked for too long (BZ 2726).
- */
-#define ISP_DMA_MAX_BURST_LENGTH	2
-
-/*
- * Create a list of HAS and IS properties that defines the system
- *
- * The configuration assumes the following
- * - The system is hetereogeneous; Multiple cells and devices classes
- * - The cell and device instances are homogeneous, each device type
- *   belongs to the same class
- * - Device instances supporting a subset of the class capabilities are
- *   allowed
- *
- * We could manage different device classes through the enumerated
- * lists (C) or the use of classes (C++), but that is presently not
- * fully supported
- *
- * N.B. the 3 input formatters are of 2 different classess
- */
-
+#define HAS_NO_INPUT_FORMATTER
 #define USE_INPUT_SYSTEM_VERSION_2401
-
-#define HAS_MMU_VERSION_2
-#define HAS_DMA_VERSION_2
-#define HAS_GDC_VERSION_2
-#define HAS_VAMEM_VERSION_2
-#define HAS_HMEM_VERSION_1
-#define HAS_BAMEM_VERSION_2
-#define HAS_IRQ_VERSION_2
-#define HAS_IRQ_MAP_VERSION_2
-#define HAS_INPUT_FORMATTER_VERSION_2
-/* 2401: HAS_INPUT_SYSTEM_VERSION_3 */
-/* 2400: HAS_INPUT_SYSTEM_VERSION_2 */
-#define HAS_INPUT_SYSTEM_VERSION_2
 #define HAS_INPUT_SYSTEM_VERSION_2401
-#define HAS_BUFFERED_SENSOR
-#define HAS_FIFO_MONITORS_VERSION_2
-/* #define HAS_GP_REGS_VERSION_2 */
-#define HAS_GP_DEVICE_VERSION_2
-#define HAS_GPIO_VERSION_1
-#define HAS_TIMED_CTRL_VERSION_1
-#define HAS_RX_VERSION_2
-#define HAS_NO_INPUT_FORMATTER
-/*#define HAS_NO_PACKED_RAW_PIXELS*/
-/*#define HAS_NO_DVS_6AXIS_CONFIG_UPDATE*/
-
-#define DMA_DDR_TO_VAMEM_WORKAROUND
-#define DMA_DDR_TO_HMEM_WORKAROUND
-
-/*
- * Semi global. "HRT" is accessible from SP, but
- * the HRT types do not fully apply
- */
-#define HRT_VADDRESS_WIDTH	32
-/* Surprise, this is a local property*/
-/*#define HRT_ADDRESS_WIDTH	64 */
-#define HRT_DATA_WIDTH		32
-
-#define SIZEOF_HRT_REG		(HRT_DATA_WIDTH >> 3)
-#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8)
-
-/* The main bus connecting all devices */
-#define HRT_BUS_WIDTH		HIVE_ISP_CTRL_DATA_WIDTH
-#define HRT_BUS_BYTES		HIVE_ISP_CTRL_DATA_BYTES
-
 #define CSI2P_DISABLE_ISYS2401_ONLINE_MODE
-
-/* per-frame parameter handling support */
-#define SH_CSS_ENABLE_PER_FRAME_PARAMS
-
-typedef u32			hrt_bus_align_t;
-
-/*
- * Enumerate the devices, device access through the API is by ID,
- * through the DLI by address. The enumerator terminators are used
- * to size the wiring arrays and as an exception value.
- */
-typedef enum {
-	DDR0_ID = 0,
-	N_DDR_ID
-} ddr_ID_t;
-
-typedef enum {
-	ISP0_ID = 0,
-	N_ISP_ID
-} isp_ID_t;
-
-typedef enum {
-	SP0_ID = 0,
-	N_SP_ID
-} sp_ID_t;
-
-typedef enum {
-	MMU0_ID = 0,
-	MMU1_ID,
-	N_MMU_ID
-} mmu_ID_t;
-
-typedef enum {
-	DMA0_ID = 0,
-	N_DMA_ID
-} dma_ID_t;
-
-typedef enum {
-	GDC0_ID = 0,
-	GDC1_ID,
-	N_GDC_ID
-} gdc_ID_t;
-
-/* this extra define is needed because we want to use it also
-   in the preprocessor, and that doesn't work with enums.
- */
-#define N_GDC_ID_CPP 2
-
-typedef enum {
-	VAMEM0_ID = 0,
-	VAMEM1_ID,
-	VAMEM2_ID,
-	N_VAMEM_ID
-} vamem_ID_t;
-
-typedef enum {
-	BAMEM0_ID = 0,
-	N_BAMEM_ID
-} bamem_ID_t;
-
-typedef enum {
-	HMEM0_ID = 0,
-	N_HMEM_ID
-} hmem_ID_t;
-
-typedef enum {
-	ISYS_IRQ0_ID = 0,	/* port a */
-	ISYS_IRQ1_ID,	/* port b */
-	ISYS_IRQ2_ID,	/* port c */
-	N_ISYS_IRQ_ID
-} isys_irq_ID_t;
-
-typedef enum {
-	IRQ0_ID = 0,	/* GP IRQ block */
-	IRQ1_ID,	/* Input formatter */
-	IRQ2_ID,	/* input system */
-	IRQ3_ID,	/* input selector */
-	N_IRQ_ID
-} irq_ID_t;
-
-typedef enum {
-	FIFO_MONITOR0_ID = 0,
-	N_FIFO_MONITOR_ID
-} fifo_monitor_ID_t;
-
-/*
- * Deprecated: Since all gp_reg instances are different
- * and put in the address maps of other devices we cannot
- * enumerate them as that assumes the instrances are the
- * same.
- *
- * We define a single GP_DEVICE containing all gp_regs
- * w.r.t. a single base address
- *
-typedef enum {
-	GP_REGS0_ID = 0,
-	N_GP_REGS_ID
-} gp_regs_ID_t;
- */
-typedef enum {
-	GP_DEVICE0_ID = 0,
-	N_GP_DEVICE_ID
-} gp_device_ID_t;
-
-typedef enum {
-	GP_TIMER0_ID = 0,
-	GP_TIMER1_ID,
-	GP_TIMER2_ID,
-	GP_TIMER3_ID,
-	GP_TIMER4_ID,
-	GP_TIMER5_ID,
-	GP_TIMER6_ID,
-	GP_TIMER7_ID,
-	N_GP_TIMER_ID
-} gp_timer_ID_t;
-
-typedef enum {
-	GPIO0_ID = 0,
-	N_GPIO_ID
-} gpio_ID_t;
-
-typedef enum {
-	TIMED_CTRL0_ID = 0,
-	N_TIMED_CTRL_ID
-} timed_ctrl_ID_t;
-
-typedef enum {
-	INPUT_FORMATTER0_ID = 0,
-	INPUT_FORMATTER1_ID,
-	INPUT_FORMATTER2_ID,
-	INPUT_FORMATTER3_ID,
-	N_INPUT_FORMATTER_ID
-} input_formatter_ID_t;
-
-/* The IF RST is outside the IF */
-#define INPUT_FORMATTER0_SRST_OFFSET	0x0824
-#define INPUT_FORMATTER1_SRST_OFFSET	0x0624
-#define INPUT_FORMATTER2_SRST_OFFSET	0x0424
-#define INPUT_FORMATTER3_SRST_OFFSET	0x0224
-
-#define INPUT_FORMATTER0_SRST_MASK		0x0001
-#define INPUT_FORMATTER1_SRST_MASK		0x0002
-#define INPUT_FORMATTER2_SRST_MASK		0x0004
-#define INPUT_FORMATTER3_SRST_MASK		0x0008
-
-typedef enum {
-	INPUT_SYSTEM0_ID = 0,
-	N_INPUT_SYSTEM_ID
-} input_system_ID_t;
-
-typedef enum {
-	RX0_ID = 0,
-	N_RX_ID
-} rx_ID_t;
-
-enum mipi_port_id {
-	MIPI_PORT0_ID = 0,
-	MIPI_PORT1_ID,
-	MIPI_PORT2_ID,
-	N_MIPI_PORT_ID
-};
-
-#define	N_RX_CHANNEL_ID		4
-
-/* Generic port enumeration with an internal port type ID */
-typedef enum {
-	CSI_PORT0_ID = 0,
-	CSI_PORT1_ID,
-	CSI_PORT2_ID,
-	TPG_PORT0_ID,
-	PRBS_PORT0_ID,
-	FIFO_PORT0_ID,
-	MEMORY_PORT0_ID,
-	N_INPUT_PORT_ID
-} input_port_ID_t;
-
-typedef enum {
-	CAPTURE_UNIT0_ID = 0,
-	CAPTURE_UNIT1_ID,
-	CAPTURE_UNIT2_ID,
-	ACQUISITION_UNIT0_ID,
-	DMA_UNIT0_ID,
-	CTRL_UNIT0_ID,
-	GPREGS_UNIT0_ID,
-	FIFO_UNIT0_ID,
-	IRQ_UNIT0_ID,
-	N_SUB_SYSTEM_ID
-} sub_system_ID_t;
-
-#define	N_CAPTURE_UNIT_ID		3
-#define	N_ACQUISITION_UNIT_ID	1
-#define	N_CTRL_UNIT_ID			1
-
-/*
- * Input-buffer Controller.
- */
-typedef enum {
-	IBUF_CTRL0_ID = 0,	/* map to ISYS2401_IBUF_CNTRL_A */
-	IBUF_CTRL1_ID,		/* map to ISYS2401_IBUF_CNTRL_B */
-	IBUF_CTRL2_ID,		/* map ISYS2401_IBUF_CNTRL_C */
-	N_IBUF_CTRL_ID
-} ibuf_ctrl_ID_t;
-/* end of Input-buffer Controller */
-
-/*
- * Stream2MMIO.
- */
-typedef enum {
-	STREAM2MMIO0_ID = 0,	/* map to ISYS2401_S2M_A */
-	STREAM2MMIO1_ID,	/* map to ISYS2401_S2M_B */
-	STREAM2MMIO2_ID,	/* map to ISYS2401_S2M_C */
-	N_STREAM2MMIO_ID
-} stream2mmio_ID_t;
-
-typedef enum {
-	/*
-	 * Stream2MMIO 0 has 8 SIDs that are indexed by
-	 * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID7_ID].
-	 *
-	 * Stream2MMIO 1 has 4 SIDs that are indexed by
-	 * [STREAM2MMIO_SID0_ID...TREAM2MMIO_SID3_ID].
-	 *
-	 * Stream2MMIO 2 has 4 SIDs that are indexed by
-	 * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID3_ID].
-	 */
-	STREAM2MMIO_SID0_ID = 0,
-	STREAM2MMIO_SID1_ID,
-	STREAM2MMIO_SID2_ID,
-	STREAM2MMIO_SID3_ID,
-	STREAM2MMIO_SID4_ID,
-	STREAM2MMIO_SID5_ID,
-	STREAM2MMIO_SID6_ID,
-	STREAM2MMIO_SID7_ID,
-	N_STREAM2MMIO_SID_ID
-} stream2mmio_sid_ID_t;
-/* end of Stream2MMIO */
-
-/**
- * Input System 2401: CSI-MIPI recevier.
- */
-typedef enum {
-	CSI_RX_BACKEND0_ID = 0,	/* map to ISYS2401_MIPI_BE_A */
-	CSI_RX_BACKEND1_ID,		/* map to ISYS2401_MIPI_BE_B */
-	CSI_RX_BACKEND2_ID,		/* map to ISYS2401_MIPI_BE_C */
-	N_CSI_RX_BACKEND_ID
-} csi_rx_backend_ID_t;
-
-typedef enum {
-	CSI_RX_FRONTEND0_ID = 0,	/* map to ISYS2401_CSI_RX_A */
-	CSI_RX_FRONTEND1_ID,		/* map to ISYS2401_CSI_RX_B */
-	CSI_RX_FRONTEND2_ID,		/* map to ISYS2401_CSI_RX_C */
-#define N_CSI_RX_FRONTEND_ID (CSI_RX_FRONTEND2_ID + 1)
-} csi_rx_frontend_ID_t;
-
-typedef enum {
-	CSI_RX_DLANE0_ID = 0,		/* map to DLANE0 in CSI RX */
-	CSI_RX_DLANE1_ID,		/* map to DLANE1 in CSI RX */
-	CSI_RX_DLANE2_ID,		/* map to DLANE2 in CSI RX */
-	CSI_RX_DLANE3_ID,		/* map to DLANE3 in CSI RX */
-	N_CSI_RX_DLANE_ID
-} csi_rx_fe_dlane_ID_t;
-/* end of CSI-MIPI receiver */
-
-typedef enum {
-	ISYS2401_DMA0_ID = 0,
-	N_ISYS2401_DMA_ID
-} isys2401_dma_ID_t;
-
-/**
- * Pixel-generator. ("system_global.h")
- */
-typedef enum {
-	PIXELGEN0_ID = 0,
-	PIXELGEN1_ID,
-	PIXELGEN2_ID,
-	N_PIXELGEN_ID
-} pixelgen_ID_t;
-/* end of pixel-generator. ("system_global.h") */
-
-typedef enum {
-	INPUT_SYSTEM_CSI_PORT0_ID = 0,
-	INPUT_SYSTEM_CSI_PORT1_ID,
-	INPUT_SYSTEM_CSI_PORT2_ID,
-
-	INPUT_SYSTEM_PIXELGEN_PORT0_ID,
-	INPUT_SYSTEM_PIXELGEN_PORT1_ID,
-	INPUT_SYSTEM_PIXELGEN_PORT2_ID,
-
-	N_INPUT_SYSTEM_INPUT_PORT_ID
-} input_system_input_port_ID_t;
-
-#define N_INPUT_SYSTEM_CSI_PORT	3
-
-typedef enum {
-	ISYS2401_DMA_CHANNEL_0 = 0,
-	ISYS2401_DMA_CHANNEL_1,
-	ISYS2401_DMA_CHANNEL_2,
-	ISYS2401_DMA_CHANNEL_3,
-	ISYS2401_DMA_CHANNEL_4,
-	ISYS2401_DMA_CHANNEL_5,
-	ISYS2401_DMA_CHANNEL_6,
-	ISYS2401_DMA_CHANNEL_7,
-	ISYS2401_DMA_CHANNEL_8,
-	ISYS2401_DMA_CHANNEL_9,
-	ISYS2401_DMA_CHANNEL_10,
-	ISYS2401_DMA_CHANNEL_11,
-	N_ISYS2401_DMA_CHANNEL
-} isys2401_dma_channel;
-
-enum ia_css_isp_memories {
-	IA_CSS_ISP_PMEM0 = 0,
-	IA_CSS_ISP_DMEM0,
-	IA_CSS_ISP_VMEM0,
-	IA_CSS_ISP_VAMEM0,
-	IA_CSS_ISP_VAMEM1,
-	IA_CSS_ISP_VAMEM2,
-	IA_CSS_ISP_HMEM0,
-	IA_CSS_SP_DMEM0,
-	IA_CSS_DDR,
-	N_IA_CSS_MEMORIES
-};
-
-#define IA_CSS_NUM_MEMORIES 9
-/* For driver compatibility */
-#define N_IA_CSS_ISP_MEMORIES   IA_CSS_NUM_MEMORIES
-#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES
-
-#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */

drivers/staging/media/atomisp/pci/sh_css.c

@@ -1841,8 +1841,13 @@ ia_css_init(struct device *dev, const struct ia_css_env *env,
 #endif
 
 #if !defined(HAS_NO_INPUT_SYSTEM)
+
+	if (!IS_ISP2401)
+		dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN,
+				       ISP2400_DMA_MAX_BURST_LENGTH);
+	else
 		dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN,
-			       ISP_DMA_MAX_BURST_LENGTH);
+				       ISP2401_DMA_MAX_BURST_LENGTH);
 
 	if (ia_css_isys_init() != INPUT_SYSTEM_ERR_NO_ERROR)
 		err = -EINVAL;

drivers/staging/media/atomisp/pci/system_global.h

@@ -4,8 +4,403 @@
  *    (c) 2020 Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
  */
 
+#ifndef __SYSTEM_GLOBAL_H_INCLUDED__
+#define __SYSTEM_GLOBAL_H_INCLUDED__
+
+/*
+ * Create a list of HAS and IS properties that defines the system
+ * Those are common for both ISP2400 and ISP2401
+ *
+ * The configuration assumes the following
+ * - The system is hetereogeneous; Multiple cells and devices classes
+ * - The cell and device instances are homogeneous, each device type
+ *   belongs to the same class
+ * - Device instances supporting a subset of the class capabilities are
+ *   allowed
+ *
+ * We could manage different device classes through the enumerated
+ * lists (C) or the use of classes (C++), but that is presently not
+ * fully supported
+ *
+ * N.B. the 3 input formatters are of 2 different classess
+ */
+
+#define HAS_MMU_VERSION_2
+#define HAS_DMA_VERSION_2
+#define HAS_GDC_VERSION_2
+#define HAS_VAMEM_VERSION_2
+#define HAS_HMEM_VERSION_1
+#define HAS_BAMEM_VERSION_2
+#define HAS_IRQ_VERSION_2
+#define HAS_IRQ_MAP_VERSION_2
+#define HAS_INPUT_FORMATTER_VERSION_2
+#define HAS_INPUT_SYSTEM_VERSION_2
+#define HAS_BUFFERED_SENSOR
+#define HAS_FIFO_MONITORS_VERSION_2
+#define HAS_GP_DEVICE_VERSION_2
+#define HAS_GPIO_VERSION_1
+#define HAS_TIMED_CTRL_VERSION_1
+#define HAS_RX_VERSION_2
+
+/* per-frame parameter handling support */
+#define SH_CSS_ENABLE_PER_FRAME_PARAMS
+
+#define DMA_DDR_TO_VAMEM_WORKAROUND
+#define DMA_DDR_TO_HMEM_WORKAROUND
+
+/*
+ * The longest allowed (uninteruptible) bus transfer, does not
+ * take stalling into account
+ */
+#define HIVE_ISP_MAX_BURST_LENGTH	1024
+
+/*
+ * Maximum allowed burst length in words for the ISP DMA
+ * This value is set to 2 to prevent the ISP DMA from blocking
+ * the bus for too long; as the input system can only buffer
+ * 2 lines on Moorefield and Cherrytrail, the input system buffers
+ * may overflow if blocked for too long (BZ 2726).
+ */
+#define ISP2400_DMA_MAX_BURST_LENGTH	128
+#define ISP2401_DMA_MAX_BURST_LENGTH	2
+
 #ifdef ISP2401
 #  include "isp2401_system_global.h"
 #else
 #  include "isp2400_system_global.h"
 #endif
+
+#include <hive_isp_css_defs.h>
+#include <type_support.h>
+
+/* This interface is deprecated */
+#include "hive_types.h"
+
+/*
+ * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply
+ */
+#define HRT_VADDRESS_WIDTH	32
+
+#define SIZEOF_HRT_REG		(HRT_DATA_WIDTH >> 3)
+#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8)
+
+/* The main bus connecting all devices */
+#define HRT_BUS_WIDTH		HIVE_ISP_CTRL_DATA_WIDTH
+#define HRT_BUS_BYTES		HIVE_ISP_CTRL_DATA_BYTES
+
+typedef u32			hrt_bus_align_t;
+
+/*
+ * Enumerate the devices, device access through the API is by ID,
+ * through the DLI by address. The enumerator terminators are used
+ * to size the wiring arrays and as an exception value.
+ */
+typedef enum {
+	DDR0_ID = 0,
+	N_DDR_ID
+} ddr_ID_t;
+
+typedef enum {
+	ISP0_ID = 0,
+	N_ISP_ID
+} isp_ID_t;
+
+typedef enum {
+	SP0_ID = 0,
+	N_SP_ID
+} sp_ID_t;
+
+typedef enum {
+	MMU0_ID = 0,
+	MMU1_ID,
+	N_MMU_ID
+} mmu_ID_t;
+
+typedef enum {
+	DMA0_ID = 0,
+	N_DMA_ID
+} dma_ID_t;
+
+typedef enum {
+	GDC0_ID = 0,
+	GDC1_ID,
+	N_GDC_ID
+} gdc_ID_t;
+
+/* this extra define is needed because we want to use it also
+   in the preprocessor, and that doesn't work with enums.
+ */
+#define N_GDC_ID_CPP 2
+
+typedef enum {
+	VAMEM0_ID = 0,
+	VAMEM1_ID,
+	VAMEM2_ID,
+	N_VAMEM_ID
+} vamem_ID_t;
+
+typedef enum {
+	BAMEM0_ID = 0,
+	N_BAMEM_ID
+} bamem_ID_t;
+
+typedef enum {
+	HMEM0_ID = 0,
+	N_HMEM_ID
+} hmem_ID_t;
+
+typedef enum {
+	IRQ0_ID = 0,	/* GP IRQ block */
+	IRQ1_ID,	/* Input formatter */
+	IRQ2_ID,	/* input system */
+	IRQ3_ID,	/* input selector */
+	N_IRQ_ID
+} irq_ID_t;
+
+typedef enum {
+	FIFO_MONITOR0_ID = 0,
+	N_FIFO_MONITOR_ID
+} fifo_monitor_ID_t;
+
+typedef enum {
+	GP_DEVICE0_ID = 0,
+	N_GP_DEVICE_ID
+} gp_device_ID_t;
+
+typedef enum {
+	GP_TIMER0_ID = 0,
+	GP_TIMER1_ID,
+	GP_TIMER2_ID,
+	GP_TIMER3_ID,
+	GP_TIMER4_ID,
+	GP_TIMER5_ID,
+	GP_TIMER6_ID,
+	GP_TIMER7_ID,
+	N_GP_TIMER_ID
+} gp_timer_ID_t;
+
+typedef enum {
+	GPIO0_ID = 0,
+	N_GPIO_ID
+} gpio_ID_t;
+
+typedef enum {
+	TIMED_CTRL0_ID = 0,
+	N_TIMED_CTRL_ID
+} timed_ctrl_ID_t;
+
+typedef enum {
+	INPUT_FORMATTER0_ID = 0,
+	INPUT_FORMATTER1_ID,
+	INPUT_FORMATTER2_ID,
+	INPUT_FORMATTER3_ID,
+	N_INPUT_FORMATTER_ID
+} input_formatter_ID_t;
+
+/* The IF RST is outside the IF */
+#define INPUT_FORMATTER0_SRST_OFFSET	0x0824
+#define INPUT_FORMATTER1_SRST_OFFSET	0x0624
+#define INPUT_FORMATTER2_SRST_OFFSET	0x0424
+#define INPUT_FORMATTER3_SRST_OFFSET	0x0224
+
+#define INPUT_FORMATTER0_SRST_MASK		0x0001
+#define INPUT_FORMATTER1_SRST_MASK		0x0002
+#define INPUT_FORMATTER2_SRST_MASK		0x0004
+#define INPUT_FORMATTER3_SRST_MASK		0x0008
+
+typedef enum {
+	INPUT_SYSTEM0_ID = 0,
+	N_INPUT_SYSTEM_ID
+} input_system_ID_t;
+
+typedef enum {
+	RX0_ID = 0,
+	N_RX_ID
+} rx_ID_t;
+
+enum mipi_port_id {
+	MIPI_PORT0_ID = 0,
+	MIPI_PORT1_ID,
+	MIPI_PORT2_ID,
+	N_MIPI_PORT_ID
+};
+
+#define	N_RX_CHANNEL_ID		4
+
+/* Generic port enumeration with an internal port type ID */
+typedef enum {
+	CSI_PORT0_ID = 0,
+	CSI_PORT1_ID,
+	CSI_PORT2_ID,
+	TPG_PORT0_ID,
+	PRBS_PORT0_ID,
+	FIFO_PORT0_ID,
+	MEMORY_PORT0_ID,
+	N_INPUT_PORT_ID
+} input_port_ID_t;
+
+typedef enum {
+	CAPTURE_UNIT0_ID = 0,
+	CAPTURE_UNIT1_ID,
+	CAPTURE_UNIT2_ID,
+	ACQUISITION_UNIT0_ID,
+	DMA_UNIT0_ID,
+	CTRL_UNIT0_ID,
+	GPREGS_UNIT0_ID,
+	FIFO_UNIT0_ID,
+	IRQ_UNIT0_ID,
+	N_SUB_SYSTEM_ID
+} sub_system_ID_t;
+
+#define	N_CAPTURE_UNIT_ID		3
+#define	N_ACQUISITION_UNIT_ID		1
+#define	N_CTRL_UNIT_ID			1
+
+
+enum ia_css_isp_memories {
+	IA_CSS_ISP_PMEM0 = 0,
+	IA_CSS_ISP_DMEM0,
+	IA_CSS_ISP_VMEM0,
+	IA_CSS_ISP_VAMEM0,
+	IA_CSS_ISP_VAMEM1,
+	IA_CSS_ISP_VAMEM2,
+	IA_CSS_ISP_HMEM0,
+	IA_CSS_SP_DMEM0,
+	IA_CSS_DDR,
+	N_IA_CSS_MEMORIES
+};
+
+#define IA_CSS_NUM_MEMORIES 9
+/* For driver compatibility */
+#define N_IA_CSS_ISP_MEMORIES   IA_CSS_NUM_MEMORIES
+#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES
+
+/*
+ * ISP2401 specific enums
+ */
+
+typedef enum {
+	ISYS_IRQ0_ID = 0,	/* port a */
+	ISYS_IRQ1_ID,	/* port b */
+	ISYS_IRQ2_ID,	/* port c */
+	N_ISYS_IRQ_ID
+} isys_irq_ID_t;
+
+
+/*
+ * Input-buffer Controller.
+ */
+typedef enum {
+	IBUF_CTRL0_ID = 0,	/* map to ISYS2401_IBUF_CNTRL_A */
+	IBUF_CTRL1_ID,		/* map to ISYS2401_IBUF_CNTRL_B */
+	IBUF_CTRL2_ID,		/* map ISYS2401_IBUF_CNTRL_C */
+	N_IBUF_CTRL_ID
+} ibuf_ctrl_ID_t;
+/* end of Input-buffer Controller */
+
+/*
+ * Stream2MMIO.
+ */
+typedef enum {
+	STREAM2MMIO0_ID = 0,	/* map to ISYS2401_S2M_A */
+	STREAM2MMIO1_ID,	/* map to ISYS2401_S2M_B */
+	STREAM2MMIO2_ID,	/* map to ISYS2401_S2M_C */
+	N_STREAM2MMIO_ID
+} stream2mmio_ID_t;
+
+typedef enum {
+	/*
+	 * Stream2MMIO 0 has 8 SIDs that are indexed by
+	 * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID7_ID].
+	 *
+	 * Stream2MMIO 1 has 4 SIDs that are indexed by
+	 * [STREAM2MMIO_SID0_ID...TREAM2MMIO_SID3_ID].
+	 *
+	 * Stream2MMIO 2 has 4 SIDs that are indexed by
+	 * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID3_ID].
+	 */
+	STREAM2MMIO_SID0_ID = 0,
+	STREAM2MMIO_SID1_ID,
+	STREAM2MMIO_SID2_ID,
+	STREAM2MMIO_SID3_ID,
+	STREAM2MMIO_SID4_ID,
+	STREAM2MMIO_SID5_ID,
+	STREAM2MMIO_SID6_ID,
+	STREAM2MMIO_SID7_ID,
+	N_STREAM2MMIO_SID_ID
+} stream2mmio_sid_ID_t;
+/* end of Stream2MMIO */
+
+/**
+ * Input System 2401: CSI-MIPI recevier.
+ */
+typedef enum {
+	CSI_RX_BACKEND0_ID = 0,	/* map to ISYS2401_MIPI_BE_A */
+	CSI_RX_BACKEND1_ID,		/* map to ISYS2401_MIPI_BE_B */
+	CSI_RX_BACKEND2_ID,		/* map to ISYS2401_MIPI_BE_C */
+	N_CSI_RX_BACKEND_ID
+} csi_rx_backend_ID_t;
+
+typedef enum {
+	CSI_RX_FRONTEND0_ID = 0,	/* map to ISYS2401_CSI_RX_A */
+	CSI_RX_FRONTEND1_ID,		/* map to ISYS2401_CSI_RX_B */
+	CSI_RX_FRONTEND2_ID,		/* map to ISYS2401_CSI_RX_C */
+#define N_CSI_RX_FRONTEND_ID (CSI_RX_FRONTEND2_ID + 1)
+} csi_rx_frontend_ID_t;
+
+typedef enum {
+	CSI_RX_DLANE0_ID = 0,		/* map to DLANE0 in CSI RX */
+	CSI_RX_DLANE1_ID,		/* map to DLANE1 in CSI RX */
+	CSI_RX_DLANE2_ID,		/* map to DLANE2 in CSI RX */
+	CSI_RX_DLANE3_ID,		/* map to DLANE3 in CSI RX */
+	N_CSI_RX_DLANE_ID
+} csi_rx_fe_dlane_ID_t;
+/* end of CSI-MIPI receiver */
+
+typedef enum {
+	ISYS2401_DMA0_ID = 0,
+	N_ISYS2401_DMA_ID
+} isys2401_dma_ID_t;
+
+/**
+ * Pixel-generator. ("system_global.h")
+ */
+typedef enum {
+	PIXELGEN0_ID = 0,
+	PIXELGEN1_ID,
+	PIXELGEN2_ID,
+	N_PIXELGEN_ID
+} pixelgen_ID_t;
+/* end of pixel-generator. ("system_global.h") */
+
+typedef enum {
+	INPUT_SYSTEM_CSI_PORT0_ID = 0,
+	INPUT_SYSTEM_CSI_PORT1_ID,
+	INPUT_SYSTEM_CSI_PORT2_ID,
+
+	INPUT_SYSTEM_PIXELGEN_PORT0_ID,
+	INPUT_SYSTEM_PIXELGEN_PORT1_ID,
+	INPUT_SYSTEM_PIXELGEN_PORT2_ID,
+
+	N_INPUT_SYSTEM_INPUT_PORT_ID
+} input_system_input_port_ID_t;
+
+#define N_INPUT_SYSTEM_CSI_PORT	3
+
+typedef enum {
+	ISYS2401_DMA_CHANNEL_0 = 0,
+	ISYS2401_DMA_CHANNEL_1,
+	ISYS2401_DMA_CHANNEL_2,
+	ISYS2401_DMA_CHANNEL_3,
+	ISYS2401_DMA_CHANNEL_4,
+	ISYS2401_DMA_CHANNEL_5,
+	ISYS2401_DMA_CHANNEL_6,
+	ISYS2401_DMA_CHANNEL_7,
+	ISYS2401_DMA_CHANNEL_8,
+	ISYS2401_DMA_CHANNEL_9,
+	ISYS2401_DMA_CHANNEL_10,
+	ISYS2401_DMA_CHANNEL_11,
+	N_ISYS2401_DMA_CHANNEL
+} isys2401_dma_channel;
+
+#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */

drivers/staging/media/atomisp/pci/isp2401_system_local.h → drivers/staging/media/atomisp/pci/system_local.c

-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Support for Intel Camera Imaging ISP subsystem.
  * Copyright (c) 2015, Intel Corporation.
@@ -13,63 +13,27 @@
  * more details.
  */
 
-#ifndef __SYSTEM_LOCAL_H_INCLUDED__
-#define __SYSTEM_LOCAL_H_INCLUDED__
-
-#ifdef HRT_ISP_CSS_CUSTOM_HOST
-#ifndef HRT_USE_VIR_ADDRS
-#define HRT_USE_VIR_ADDRS
-#endif
-#endif
-
-#include "system_global.h"
-
-#define HRT_ADDRESS_WIDTH	64		/* Surprise, this is a local property */
-
-/* This interface is deprecated */
-#include "hive_types.h"
-
-/*
- * Cell specific address maps
- */
-#if HRT_ADDRESS_WIDTH == 64
-
-#define GP_FIFO_BASE   ((hrt_address)0x0000000000090104)		/* This is NOT a base address */
-
-/* DDR */
-static const hrt_address DDR_BASE[N_DDR_ID] = {
-	0x0000000120000000ULL
-};
+#include "system_local.h"
 
 /* ISP */
-static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
+const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
 	0x0000000000020000ULL
 };
 
-static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
+const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
 	0x0000000000200000ULL
 };
 
-static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
+const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
 	0x0000000000100000ULL
 };
 
-static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = {
-	0x00000000001C0000ULL,
-	0x00000000001D0000ULL,
-	0x00000000001E0000ULL
-};
-
-static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = {
-	0x00000000001F0000ULL
-};
-
 /* SP */
-static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
+const hrt_address SP_CTRL_BASE[N_SP_ID] = {
 	0x0000000000010000ULL
 };
 
-static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
+const hrt_address SP_DMEM_BASE[N_SP_ID] = {
 	0x0000000000300000ULL
 };
 
@@ -78,22 +42,22 @@ static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
  * MMU0_ID: The data MMU
  * MMU1_ID: The icache MMU
  */
-static const hrt_address MMU_BASE[N_MMU_ID] = {
+const hrt_address MMU_BASE[N_MMU_ID] = {
 	0x0000000000070000ULL,
 	0x00000000000A0000ULL
 };
 
 /* DMA */
-static const hrt_address DMA_BASE[N_DMA_ID] = {
+const hrt_address DMA_BASE[N_DMA_ID] = {
 	0x0000000000040000ULL
 };
 
-static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
+const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
 	0x00000000000CA000ULL
 };
 
 /* IRQ */
-static const hrt_address IRQ_BASE[N_IRQ_ID] = {
+const hrt_address IRQ_BASE[N_IRQ_ID] = {
 	0x0000000000000500ULL,
 	0x0000000000030A00ULL,
 	0x000000000008C000ULL,
@@ -105,47 +69,47 @@ static const hrt_address IRQ_BASE[N_IRQ_ID] = {
  */
 
 /* GDC */
-static const hrt_address GDC_BASE[N_GDC_ID] = {
+const hrt_address GDC_BASE[N_GDC_ID] = {
 	0x0000000000050000ULL,
 	0x0000000000060000ULL
 };
 
 /* FIFO_MONITOR (not a subset of GP_DEVICE) */
-static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
+const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
 	0x0000000000000000ULL
 };
 
 /*
-static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = {
+const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = {
 	0x0000000000000000ULL};
 
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
+const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
 	0x0000000000090000ULL};
 */
 
 /* GP_DEVICE (single base for all separate GP_REG instances) */
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
+const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
 	0x0000000000000000ULL
 };
 
 /*GP TIMER , all timer registers are inter-twined,
  * so, having multiple base addresses for
  * different timers does not help*/
-static const hrt_address GP_TIMER_BASE =
+const hrt_address GP_TIMER_BASE =
     (hrt_address)0x0000000000000600ULL;
 
 /* GPIO */
-static const hrt_address GPIO_BASE[N_GPIO_ID] = {
+const hrt_address GPIO_BASE[N_GPIO_ID] = {
 	0x0000000000000400ULL
 };
 
 /* TIMED_CTRL */
-static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
+const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
 	0x0000000000000100ULL
 };
 
 /* INPUT_FORMATTER */
-static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
+const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
 	0x0000000000030000ULL,
 	0x0000000000030200ULL,
 	0x0000000000030400ULL,
@@ -153,7 +117,7 @@ static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
 }; /* memcpy() */
 
 /* INPUT_SYSTEM */
-static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
+const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
 	0x0000000000080000ULL
 };
 
@@ -168,235 +132,48 @@ static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
 /*	0x000000000008C000ULL, */ /* IRQ */
 
 /* RX, the MIPI lane control regs start at offset 0 */
-static const hrt_address RX_BASE[N_RX_ID] = {
+const hrt_address RX_BASE[N_RX_ID] = {
 	0x0000000000080100ULL
 };
 
 /* IBUF_CTRL, part of the Input System 2401 */
-static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
+const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
 	0x00000000000C1800ULL,	/* ibuf controller A */
 	0x00000000000C3800ULL,	/* ibuf controller B */
 	0x00000000000C5800ULL	/* ibuf controller C */
 };
 
 /* ISYS IRQ Controllers, part of the Input System 2401 */
-static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
+const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
 	0x00000000000C1400ULL,	/* port a */
 	0x00000000000C3400ULL,	/* port b */
 	0x00000000000C5400ULL	/* port c */
 };
 
 /* CSI FE, part of the Input System 2401 */
-static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
+const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
 	0x00000000000C0400ULL,	/* csi fe controller A */
 	0x00000000000C2400ULL,	/* csi fe controller B */
 	0x00000000000C4400ULL	/* csi fe controller C */
 };
 
 /* CSI BE, part of the Input System 2401 */
-static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
+const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
 	0x00000000000C0800ULL,	/* csi be controller A */
 	0x00000000000C2800ULL,	/* csi be controller B */
 	0x00000000000C4800ULL	/* csi be controller C */
 };
 
 /* PIXEL Generator, part of the Input System 2401 */
-static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
+const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
 	0x00000000000C1000ULL,	/* pixel gen controller A */
 	0x00000000000C3000ULL,	/* pixel gen controller B */
 	0x00000000000C5000ULL	/* pixel gen controller C */
 };
 
 /* Stream2MMIO, part of the Input System 2401 */
-static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
+const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
 	0x00000000000C0C00ULL,	/* stream2mmio controller A */
 	0x00000000000C2C00ULL,	/* stream2mmio controller B */
 	0x00000000000C4C00ULL	/* stream2mmio controller C */
 };
-#elif HRT_ADDRESS_WIDTH == 32
-
-#define GP_FIFO_BASE   ((hrt_address)0x00090104)		/* This is NOT a base address */
-
-/* DDR : Attention, this value not defined in 32-bit */
-static const hrt_address DDR_BASE[N_DDR_ID] = {
-	0x00000000UL
-};
-
-/* ISP */
-static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
-	0x00020000UL
-};
-
-static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
-	0xffffffffUL
-};
-
-static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
-	0xffffffffUL
-};
-
-static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = {
-	0xffffffffUL,
-	0xffffffffUL,
-	0xffffffffUL
-};
-
-static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = {
-	0xffffffffUL
-};
-
-/* SP */
-static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
-	0x00010000UL
-};
-
-static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
-	0x00300000UL
-};
-
-/* MMU */
-/*
- * MMU0_ID: The data MMU
- * MMU1_ID: The icache MMU
- */
-static const hrt_address MMU_BASE[N_MMU_ID] = {
-	0x00070000UL,
-	0x000A0000UL
-};
-
-/* DMA */
-static const hrt_address DMA_BASE[N_DMA_ID] = {
-	0x00040000UL
-};
-
-static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
-	0x000CA000UL
-};
-
-/* IRQ */
-static const hrt_address IRQ_BASE[N_IRQ_ID] = {
-	0x00000500UL,
-	0x00030A00UL,
-	0x0008C000UL,
-	0x00090200UL
-};
-
-/*
-	0x00000500UL};
- */
-
-/* GDC */
-static const hrt_address GDC_BASE[N_GDC_ID] = {
-	0x00050000UL,
-	0x00060000UL
-};
-
-/* FIFO_MONITOR (not a subset of GP_DEVICE) */
-static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
-	0x00000000UL
-};
-
-/*
-static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = {
-	0x00000000UL};
-
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
-	0x00090000UL};
-*/
-
-/* GP_DEVICE (single base for all separate GP_REG instances) */
-static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
-	0x00000000UL
-};
-
-/*GP TIMER , all timer registers are inter-twined,
- * so, having multiple base addresses for
- * different timers does not help*/
-static const hrt_address GP_TIMER_BASE =
-    (hrt_address)0x00000600UL;
-/* GPIO */
-static const hrt_address GPIO_BASE[N_GPIO_ID] = {
-	0x00000400UL
-};
-
-/* TIMED_CTRL */
-static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
-	0x00000100UL
-};
-
-/* INPUT_FORMATTER */
-static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
-	0x00030000UL,
-	0x00030200UL,
-	0x00030400UL
-};
-
-/*	0x00030600UL, */ /* memcpy() */
-
-/* INPUT_SYSTEM */
-static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
-	0x00080000UL
-};
-
-/*	0x00081000UL, */ /* capture A */
-/*	0x00082000UL, */ /* capture B */
-/*	0x00083000UL, */ /* capture C */
-/*	0x00084000UL, */ /* Acquisition */
-/*	0x00085000UL, */ /* DMA */
-/*	0x00089000UL, */ /* ctrl */
-/*	0x0008A000UL, */ /* GP regs */
-/*	0x0008B000UL, */ /* FIFO */
-/*	0x0008C000UL, */ /* IRQ */
-
-/* RX, the MIPI lane control regs start at offset 0 */
-static const hrt_address RX_BASE[N_RX_ID] = {
-	0x00080100UL
-};
-
-/* IBUF_CTRL, part of the Input System 2401 */
-static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
-	0x000C1800UL,	/* ibuf controller A */
-	0x000C3800UL,	/* ibuf controller B */
-	0x000C5800UL	/* ibuf controller C */
-};
-
-/* ISYS IRQ Controllers, part of the Input System 2401 */
-static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
-	0x000C1400ULL,	/* port a */
-	0x000C3400ULL,	/* port b */
-	0x000C5400ULL	/* port c */
-};
-
-/* CSI FE, part of the Input System 2401 */
-static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
-	0x000C0400UL,	/* csi fe controller A */
-	0x000C2400UL,	/* csi fe controller B */
-	0x000C4400UL	/* csi fe controller C */
-};
-
-/* CSI BE, part of the Input System 2401 */
-static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
-	0x000C0800UL,	/* csi be controller A */
-	0x000C2800UL,	/* csi be controller B */
-	0x000C4800UL	/* csi be controller C */
-};
-
-/* PIXEL Generator, part of the Input System 2401 */
-static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
-	0x000C1000UL,	/* pixel gen controller A */
-	0x000C3000UL,	/* pixel gen controller B */
-	0x000C5000UL	/* pixel gen controller C */
-};
-
-/* Stream2MMIO, part of the Input System 2401 */
-static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
-	0x000C0C00UL,	/* stream2mmio controller A */
-	0x000C2C00UL,	/* stream2mmio controller B */
-	0x000C4C00UL	/* stream2mmio controller C */
-};
-
-#else
-#error "system_local.h: HRT_ADDRESS_WIDTH must be one of {32,64}"
-#endif
-
-#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */

drivers/staging/media/atomisp/pci/system_local.h

 /* SPDX-License-Identifier: GPL-2.0 */
-// SPDX-License-Identifier: GPL-2.0-or-later
 /*
- *    (c) 2020 Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+ * Support for Intel Camera Imaging ISP subsystem.
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
  */
 
-#ifdef ISP2401
-#  include "isp2401_system_local.h"
-#else
-#  include "isp2400_system_local.h"
+#ifndef __SYSTEM_LOCAL_H_INCLUDED__
+#define __SYSTEM_LOCAL_H_INCLUDED__
+
+#ifdef HRT_ISP_CSS_CUSTOM_HOST
+#ifndef HRT_USE_VIR_ADDRS
+#define HRT_USE_VIR_ADDRS
+#endif
 #endif
+
+#include "system_global.h"
+
+/* This interface is deprecated */
+#include "hive_types.h"
+
+/*
+ * Cell specific address maps
+ */
+
+#define GP_FIFO_BASE   ((hrt_address)0x0000000000090104)		/* This is NOT a base address */
+
+/* ISP */
+extern const hrt_address ISP_CTRL_BASE[N_ISP_ID];
+extern const hrt_address ISP_DMEM_BASE[N_ISP_ID];
+extern const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID];
+
+/* SP */
+extern const hrt_address SP_CTRL_BASE[N_SP_ID];
+extern const hrt_address SP_DMEM_BASE[N_SP_ID];
+
+/* MMU */
+
+extern const hrt_address MMU_BASE[N_MMU_ID];
+
+/* DMA */
+extern const hrt_address DMA_BASE[N_DMA_ID];
+extern const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID];
+
+/* IRQ */
+extern const hrt_address IRQ_BASE[N_IRQ_ID];
+
+/* GDC */
+extern const hrt_address GDC_BASE[N_GDC_ID];
+
+/* FIFO_MONITOR (not a subset of GP_DEVICE) */
+extern const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID];
+
+/* GP_DEVICE (single base for all separate GP_REG instances) */
+extern const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID];
+
+/*GP TIMER , all timer registers are inter-twined,
+ * so, having multiple base addresses for
+ * different timers does not help*/
+extern const hrt_address GP_TIMER_BASE;
+
+/* GPIO */
+extern const hrt_address GPIO_BASE[N_GPIO_ID];
+
+/* TIMED_CTRL */
+extern const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID];
+
+/* INPUT_FORMATTER */
+extern const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID];
+
+/* INPUT_SYSTEM */
+extern const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID];
+
+/* RX, the MIPI lane control regs start at offset 0 */
+extern const hrt_address RX_BASE[N_RX_ID];
+
+/* IBUF_CTRL, part of the Input System 2401 */
+extern const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID];
+
+/* ISYS IRQ Controllers, part of the Input System 2401 */
+extern const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID];
+
+/* CSI FE, part of the Input System 2401 */
+extern const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID];
+
+/* CSI BE, part of the Input System 2401 */
+extern const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID];
+
+/* PIXEL Generator, part of the Input System 2401 */
+extern const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID];
+
+/* Stream2MMIO, part of the Input System 2401 */
+extern const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID];
+
+#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */