Commit d27a7e29 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Darren Hart (VMware)

platform/x86: intel_scu_ipc: Introduce intel_scu_ipc_raw_command()

A new call to SCU intel_scu_ipc_raw_command() writes SPTR and DPTR
registers before sending a command.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
parent 74bc77a3
......@@ -3,6 +3,9 @@
#include <linux/notifier.h>
#define IPCMSG_INDIRECT_READ 0x02
#define IPCMSG_INDIRECT_WRITE 0x05
#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */
#define IPCMSG_WARM_RESET 0xF0
......@@ -46,6 +49,9 @@ int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
int intel_scu_ipc_simple_command(int cmd, int sub);
int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
u32 *out, int outlen);
int intel_scu_ipc_raw_command(int cmd, int sub, u8 *in, int inlen,
u32 *out, int outlen, u32 dptr, u32 sptr);
/* I2C control api */
int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data);
......
......@@ -491,6 +491,69 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
}
EXPORT_SYMBOL(intel_scu_ipc_command);
#define IPC_SPTR 0x08
#define IPC_DPTR 0x0C
/**
* intel_scu_ipc_raw_command() - IPC command with data and pointers
* @cmd: IPC command code.
* @sub: IPC command sub type.
* @in: input data of this IPC command.
* @inlen: input data length in dwords.
* @out: output data of this IPC command.
* @outlen: output data length in dwords.
* @sptr: data writing to SPTR register.
* @dptr: data writing to DPTR register.
*
* Send an IPC command to SCU with input/output data and source/dest pointers.
*
* Return: an IPC error code or 0 on success.
*/
int intel_scu_ipc_raw_command(int cmd, int sub, u8 *in, int inlen,
u32 *out, int outlen, u32 dptr, u32 sptr)
{
struct intel_scu_ipc_dev *scu = &ipcdev;
int inbuflen = DIV_ROUND_UP(inlen, 4);
u32 inbuf[4];
int i, err;
/* Up to 16 bytes */
if (inbuflen > 4)
return -EINVAL;
mutex_lock(&ipclock);
if (scu->dev == NULL) {
mutex_unlock(&ipclock);
return -ENODEV;
}
writel(dptr, scu->ipc_base + IPC_DPTR);
writel(sptr, scu->ipc_base + IPC_SPTR);
/*
* SRAM controller doesn't support 8-bit writes, it only
* supports 32-bit writes, so we have to copy input data into
* the temporary buffer, and SCU FW will use the inlen to
* determine the actual input data length in the temporary
* buffer.
*/
memcpy(inbuf, in, inlen);
for (i = 0; i < inbuflen; i++)
ipc_data_writel(scu, inbuf[i], 4 * i);
ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
err = intel_scu_ipc_check_status(scu);
if (!err) {
for (i = 0; i < outlen; i++)
*out++ = ipc_data_readl(scu, 4 * i);
}
mutex_unlock(&ipclock);
return err;
}
EXPORT_SYMBOL_GPL(intel_scu_ipc_raw_command);
/* I2C commands */
#define IPC_I2C_WRITE 1 /* I2C Write command */
#define IPC_I2C_READ 2 /* I2C Read command */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment