Commit d292f33b authored by Tony Luck's avatar Tony Luck Committed by Greg Kroah-Hartman

x86/mce: Check for alternate indication of machine check recovery on Skylake

commit 4c5717da upstream.

Currently we just check the "CAPID0" register to see whether the CPU
can recover from machine checks.

But there are also some special SKUs which do not have all advanced
RAS features, but do enable machine check recovery for use with NVDIMMs.

Add a check for any of bits {8:5} in the "CAPID5" register (each
reports some NVDIMM mode available, if any of them are set, then
the system supports memory machine check recovery).
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # 4.9
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 1d1dd201
......@@ -645,12 +645,19 @@ static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev)
/* Skylake */
static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev)
{
u32 capid0;
u32 capid0, capid5;
pci_read_config_dword(pdev, 0x84, &capid0);
pci_read_config_dword(pdev, 0x98, &capid5);
if ((capid0 & 0xc0) == 0xc0)
/*
* CAPID0{7:6} indicate whether this is an advanced RAS SKU
* CAPID5{8:5} indicate that various NVDIMM usage modes are
* enabled, so memory machine check recovery is also enabled.
*/
if ((capid0 & 0xc0) == 0xc0 || (capid5 & 0x1e0))
static_branch_inc(&mcsafe_key);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, quirk_intel_brickland_xeon_ras_cap);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment