Skip to content

L
linux
Commit d294ad82 authored by Jakub Kicinski's avatar Jakub Kicinski
Browse files
Options

Merge branch 'net-ll_temac-cleanup-for-clearing-static-warnings' 

Haoyue Xu says:

====================
net: ll_temac: Cleanup for clearing static warnings

Most static warnings are detected by Checkpatch.pl, mainly about:
(1) #1: About the comments.
(2) #2: About function name in a string.
(3) #3: About the open parenthesis.
(4) #4: About the else branch.
(6) #6: About trailing statements.
(7) #5,#7: About blank lines and spaces.
====================

Link: https://lore.kernel.org/r/20220917103843.526877-1-xuhaoyue1@hisilicon.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents d57aae2e 7fe85bb3
Show whitespace changes
Inline Side-by-side
Showing with 139 additions and 123 deletions
drivers/net/ethernet/xilinx/ll_temac.h
View file @ d294ad82
......@@ -21,36 +21,45 @@
/* Configuration options */
/* Accept all incoming packets.
* This option defaults to disabled (cleared) */
* This option defaults to disabled (cleared)
*/
#define XTE_OPTION_PROMISC (1 << 0)
/* Jumbo frame support for Tx & Rx.
* This option defaults to disabled (cleared) */
* This option defaults to disabled (cleared)
*/
#define XTE_OPTION_JUMBO (1 << 1)
/* VLAN Rx & Tx frame support.
* This option defaults to disabled (cleared) */
* This option defaults to disabled (cleared)
*/
#define XTE_OPTION_VLAN (1 << 2)
/* Enable recognition of flow control frames on Rx
* This option defaults to enabled (set) */
* This option defaults to enabled (set)
*/
#define XTE_OPTION_FLOW_CONTROL (1 << 4)
/* Strip FCS and PAD from incoming frames.
* Note: PAD from VLAN frames is not stripped.
* This option defaults to disabled (set) */
* This option defaults to disabled (set)
*/
#define XTE_OPTION_FCS_STRIP (1 << 5)
/* Generate FCS field and add PAD automatically for outgoing frames.
* This option defaults to enabled (set) */
* This option defaults to enabled (set)
*/
#define XTE_OPTION_FCS_INSERT (1 << 6)
/* Enable Length/Type error checking for incoming frames. When this option is
set, the MAC will filter frames that have a mismatched type/length field
and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
types of frames are encountered. When this option is cleared, the MAC will
allow these types of frames to be received.
This option defaults to enabled (set) */
* set, the MAC will filter frames that have a mismatched type/length field
* and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
* types of frames are encountered. When this option is cleared, the MAC will
* allow these types of frames to be received.
* This option defaults to enabled (set)
*/
#define XTE_OPTION_LENTYPE_ERR (1 << 7)
/* Enable the transmitter.
* This option defaults to enabled (set) */
* This option defaults to enabled (set)
*/
#define XTE_OPTION_TXEN (1 << 11)
/* Enable the receiver
* This option defaults to enabled (set) */
* This option defaults to enabled (set)
*/
#define XTE_OPTION_RXEN (1 << 12)
/* Default options set when device is initialized or reset */
......@@ -68,18 +77,18 @@ This option defaults to enabled (set) */
#define TX_TAILDESC_PTR 0x04 /* rw */
#define TX_CHNL_CTRL 0x05 /* rw */
/*
0:7 24:31 IRQTimeout
8:15 16:23 IRQCount
16:20 11:15 Reserved
21 10 0
22 9 UseIntOnEnd
23 8 LdIRQCnt
24 7 IRQEn
25:28 3:6 Reserved
29 2 IrqErrEn
30 1 IrqDlyEn
31 0 IrqCoalEn
*/
* 0:7 24:31 IRQTimeout
* 8:15 16:23 IRQCount
* 16:20 11:15 Reserved
* 21 10 0
* 22 9 UseIntOnEnd
* 23 8 LdIRQCnt
* 24 7 IRQEn
* 25:28 3:6 Reserved
* 29 2 IrqErrEn
* 30 1 IrqDlyEn
* 31 0 IrqCoalEn
*/
#define CHNL_CTRL_IRQ_IOE (1 << 9)
#define CHNL_CTRL_IRQ_EN (1 << 7)
#define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
......@@ -87,35 +96,35 @@ This option defaults to enabled (set) */
#define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
#define TX_IRQ_REG 0x06 /* rw */
/*
0:7 24:31 DltTmrValue
8:15 16:23 ClscCntrValue
16:17 14:15 Reserved
18:21 10:13 ClscCnt
22:23 8:9 DlyCnt
24:28 3::7 Reserved
29 2 ErrIrq
30 1 DlyIrq
31 0 CoalIrq
* 0:7 24:31 DltTmrValue
* 8:15 16:23 ClscCntrValue
* 16:17 14:15 Reserved
* 18:21 10:13 ClscCnt
* 22:23 8:9 DlyCnt
* 24:28 3::7 Reserved
* 29 2 ErrIrq
* 30 1 DlyIrq
* 31 0 CoalIrq
*/
#define TX_CHNL_STS 0x07 /* r */
/*
0:9 22:31 Reserved
10 21 TailPErr
11 20 CmpErr
12 19 AddrErr
13 18 NxtPErr
14 17 CurPErr
15 16 BsyWr
16:23 8:15 Reserved
24 7 Error
25 6 IOE
26 5 SOE
27 4 Cmplt
28 3 SOP
29 2 EOP
30 1 EngBusy
31 0 Reserved
*/
* 0:9 22:31 Reserved
* 10 21 TailPErr
* 11 20 CmpErr
* 12 19 AddrErr
* 13 18 NxtPErr
* 14 17 CurPErr
* 15 16 BsyWr
* 16:23 8:15 Reserved
* 24 7 Error
* 25 6 IOE
* 26 5 SOE
* 27 4 Cmplt
* 28 3 SOP
* 29 2 EOP
* 30 1 EngBusy
* 31 0 Reserved
*/
#define RX_NXTDESC_PTR 0x08 /* r */
#define RX_CURBUF_ADDR 0x09 /* r */
......@@ -124,17 +133,17 @@ This option defaults to enabled (set) */
#define RX_TAILDESC_PTR 0x0c /* rw */
#define RX_CHNL_CTRL 0x0d /* rw */
/*
0:7 24:31 IRQTimeout
8:15 16:23 IRQCount
16:20 11:15 Reserved
21 10 0
22 9 UseIntOnEnd
23 8 LdIRQCnt
24 7 IRQEn
25:28 3:6 Reserved
29 2 IrqErrEn
30 1 IrqDlyEn
31 0 IrqCoalEn
* 0:7 24:31 IRQTimeout
* 8:15 16:23 IRQCount
* 16:20 11:15 Reserved
* 21 10 0
* 22 9 UseIntOnEnd
* 23 8 LdIRQCnt
* 24 7 IRQEn
* 25:28 3:6 Reserved
* 29 2 IrqErrEn
* 30 1 IrqDlyEn
* 31 0 IrqCoalEn
*/
#define RX_IRQ_REG 0x0e /* rw */
#define IRQ_COAL (1 << 0)
......@@ -142,13 +151,13 @@ This option defaults to enabled (set) */
#define IRQ_ERR (1 << 2)
#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
/*
0:7 24:31 DltTmrValue
8:15 16:23 ClscCntrValue
16:17 14:15 Reserved
18:21 10:13 ClscCnt
22:23 8:9 DlyCnt
24:28 3::7 Reserved
*/
* 0:7 24:31 DltTmrValue
* 8:15 16:23 ClscCntrValue
* 16:17 14:15 Reserved
* 18:21 10:13 ClscCnt
* 22:23 8:9 DlyCnt
* 24:28 3::7 Reserved
*/
#define RX_CHNL_STS 0x0f /* r */
#define CHNL_STS_ENGBUSY (1 << 1)
#define CHNL_STS_EOP (1 << 2)
......@@ -165,23 +174,23 @@ This option defaults to enabled (set) */
#define CHNL_STS_CMPERR (1 << 20)
#define CHNL_STS_TAILERR (1 << 21)
/*
0:9 22:31 Reserved
10 21 TailPErr
11 20 CmpErr
12 19 AddrErr
13 18 NxtPErr
14 17 CurPErr
15 16 BsyWr
16:23 8:15 Reserved
24 7 Error
25 6 IOE
26 5 SOE
27 4 Cmplt
28 3 SOP
29 2 EOP
30 1 EngBusy
31 0 Reserved
*/
* 0:9 22:31 Reserved
* 10 21 TailPErr
* 11 20 CmpErr
* 12 19 AddrErr
* 13 18 NxtPErr
* 14 17 CurPErr
* 15 16 BsyWr
* 16:23 8:15 Reserved
* 24 7 Error
* 25 6 IOE
* 26 5 SOE
* 27 4 Cmplt
* 28 3 SOP
* 29 2 EOP
* 30 1 EngBusy
* 31 0 Reserved
*/
#define DMA_CONTROL_REG 0x10 /* rw */
#define DMA_CONTROL_RST (1 << 0)
......
drivers/net/ethernet/xilinx/ll_temac_main.c
View file @ d294ad82
......@@ -117,7 +117,7 @@ int temac_indirect_busywait(struct temac_local *lp)
spin_until_cond(hard_acs_rdy_or_timeout(lp, timeout));
if (WARN_ON(!hard_acs_rdy(lp)))
return -ETIMEDOUT;
else
return 0;
}
......@@ -307,12 +307,10 @@ static void temac_dma_bd_release(struct net_device *ndev)
for (i = 0; i < lp->rx_bd_num; i++) {
if (!lp->rx_skb[i])
break;
else {
dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
XTE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb(lp->rx_skb[i]);
}
}
if (lp->rx_bd_v)
dma_free_coherent(ndev->dev.parent,
sizeof(*lp->rx_bd_v) * lp->rx_bd_num,
......@@ -430,7 +428,8 @@ static void temac_do_set_mac_address(struct net_device *ndev)
(ndev->dev_addr[2] << 16) |
(ndev->dev_addr[3] << 24));
/* There are reserved bits in EUAW1
* so don't affect them Set MAC bits [47:32] in EUAW1 */
* so don't affect them Set MAC bits [47:32] in EUAW1
*/
temac_indirect_out32_locked(lp, XTE_UAW1_OFFSET,
(ndev->dev_addr[4] & 0x000000ff) |
(ndev->dev_addr[5] << 8));
......@@ -530,66 +529,66 @@ static struct temac_option {
{
.opt = XTE_OPTION_JUMBO,
.reg = XTE_RXC1_OFFSET,
.m_or =XTE_RXC1_RXJMBO_MASK,
.m_or = XTE_RXC1_RXJMBO_MASK,
},
/* Turn on VLAN packet support for both Rx and Tx */
{
.opt = XTE_OPTION_VLAN,
.reg = XTE_TXC_OFFSET,
.m_or =XTE_TXC_TXVLAN_MASK,
.m_or = XTE_TXC_TXVLAN_MASK,
},
{
.opt = XTE_OPTION_VLAN,
.reg = XTE_RXC1_OFFSET,
.m_or =XTE_RXC1_RXVLAN_MASK,
.m_or = XTE_RXC1_RXVLAN_MASK,
},
/* Turn on FCS stripping on receive packets */
{
.opt = XTE_OPTION_FCS_STRIP,
.reg = XTE_RXC1_OFFSET,
.m_or =XTE_RXC1_RXFCS_MASK,
.m_or = XTE_RXC1_RXFCS_MASK,
},
/* Turn on FCS insertion on transmit packets */
{
.opt = XTE_OPTION_FCS_INSERT,
.reg = XTE_TXC_OFFSET,
.m_or =XTE_TXC_TXFCS_MASK,
.m_or = XTE_TXC_TXFCS_MASK,
},
/* Turn on length/type field checking on receive packets */
{
.opt = XTE_OPTION_LENTYPE_ERR,
.reg = XTE_RXC1_OFFSET,
.m_or =XTE_RXC1_RXLT_MASK,
.m_or = XTE_RXC1_RXLT_MASK,
},
/* Turn on flow control */
{
.opt = XTE_OPTION_FLOW_CONTROL,
.reg = XTE_FCC_OFFSET,
.m_or =XTE_FCC_RXFLO_MASK,
.m_or = XTE_FCC_RXFLO_MASK,
},
/* Turn on flow control */
{
.opt = XTE_OPTION_FLOW_CONTROL,
.reg = XTE_FCC_OFFSET,
.m_or =XTE_FCC_TXFLO_MASK,
.m_or = XTE_FCC_TXFLO_MASK,
},
/* Turn on promiscuous frame filtering (all frames are received ) */
{
.opt = XTE_OPTION_PROMISC,
.reg = XTE_AFM_OFFSET,
.m_or =XTE_AFM_EPPRM_MASK,
.m_or = XTE_AFM_EPPRM_MASK,
},
/* Enable transmitter if not already enabled */
{
.opt = XTE_OPTION_TXEN,
.reg = XTE_TXC_OFFSET,
.m_or =XTE_TXC_TXEN_MASK,
.m_or = XTE_TXC_TXEN_MASK,
},
/* Enable receiver? */
{
.opt = XTE_OPTION_RXEN,
.reg = XTE_RXC1_OFFSET,
.m_or =XTE_RXC1_RXEN_MASK,
.m_or = XTE_RXC1_RXEN_MASK,
},
{}
};
......@@ -641,7 +640,7 @@ static void temac_device_reset(struct net_device *ndev)
udelay(1);
if (--timeout == 0) {
dev_err(&ndev->dev,
"temac_device_reset RX reset timeout!!\n");
"%s RX reset timeout!!\n", __func__);
break;
}
}
......@@ -653,7 +652,7 @@ static void temac_device_reset(struct net_device *ndev)
udelay(1);
if (--timeout == 0) {
dev_err(&ndev->dev,
"temac_device_reset TX reset timeout!!\n");
"%s TX reset timeout!!\n", __func__);
break;
}
}
......@@ -672,7 +671,7 @@ static void temac_device_reset(struct net_device *ndev)
udelay(1);
if (--timeout == 0) {
dev_err(&ndev->dev,
"temac_device_reset DMA reset timeout!!\n");
"%s DMA reset timeout!!\n", __func__);
break;
}
}
......@@ -680,7 +679,7 @@ static void temac_device_reset(struct net_device *ndev)
if (temac_dma_bd_init(ndev)) {
dev_err(&ndev->dev,
"temac_device_reset descriptor allocation failed\n");
"%s descriptor allocation failed\n", __func__);
}
spin_lock_irqsave(lp->indirect_lock, flags);
......@@ -691,7 +690,8 @@ static void temac_device_reset(struct net_device *ndev)
spin_unlock_irqrestore(lp->indirect_lock, flags);
/* Sync default options with HW
* but leave receiver and transmitter disabled. */
* but leave receiver and transmitter disabled.
*/
temac_setoptions(ndev,
lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
......@@ -723,9 +723,15 @@ static void temac_adjust_link(struct net_device *ndev)
mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
switch (phy->speed) {
case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
case SPEED_1000:
mii_speed |= XTE_EMCFG_LINKSPD_1000;
break;
case SPEED_100:
mii_speed |= XTE_EMCFG_LINKSPD_100;
break;
case SPEED_10:
mii_speed |= XTE_EMCFG_LINKSPD_10;
break;
}
/* Write new speed setting out to TEMAC */
......@@ -1007,7 +1013,6 @@ static void ll_temac_recv(struct net_device *ndev)
if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) &&
(skb->protocol == htons(ETH_P_IP)) &&
(skb->len > 64)) {
/* Convert from device endianness (be32) to cpu
* endianness, and if necessary swap the bytes
* (back) for proper IP checksum byte order
......
drivers/net/ethernet/xilinx/ll_temac_mdio.c
View file @ d294ad82
......@@ -29,7 +29,8 @@ static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
/* Write the PHY address to the MIIM Access Initiator register.
* When the transfer completes, the PHY register value will appear
* in the LSW0 register */
* in the LSW0 register
*/
spin_lock_irqsave(lp->indirect_lock, flags);
temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
rc = temac_indirect_in32_locked(lp, XTE_MIIMAI_OFFSET);
......@@ -88,7 +89,8 @@ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
}
/* Enable the MDIO bus by asserting the enable bit and writing
* in the clock config */
* in the clock config
*/
temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
bus = devm_mdiobus_alloc(&pdev->dev);
......
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
View file @ d294ad82
......@@ -1375,7 +1375,7 @@ static int axienet_ethtools_get_regs_len(struct net_device *ndev)
static void axienet_ethtools_get_regs(struct net_device *ndev,
struct ethtool_regs *regs, void *ret)
{
u32 *data = (u32 *) ret;
u32 *data = (u32 *)ret;
size_t len = sizeof(u32) * AXIENET_REGS_N;
struct axienet_local *lp = netdev_priv(ndev);
......
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
View file @ d294ad82
......@@ -126,7 +126,7 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
return ret;
}
axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val);
axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32)val);
axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
(((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
XAE_MDIO_MCR_PHYAD_MASK) |
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7