Commit d325209b authored by Peter Zijlstra's avatar Peter Zijlstra Committed by Ingo Molnar

locking,arch,avr32: Fold atomic_ops

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.

Requires the asm_op because of eor.

AVR32 is a bit special in that its ADD/SUB instructions are not
symmetric. Its SUB instruction allows for an 21bit immediate.
Signed-off-by: default avatarPeter Zijlstra <peterz@infradead.org>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140531141445.GD16155@laptop.programming.kicks-ass.netSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 92ba1f53
...@@ -22,30 +22,43 @@ ...@@ -22,30 +22,43 @@
#define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_read(v) (*(volatile int *)&(v)->counter)
#define atomic_set(v, i) (((v)->counter) = i) #define atomic_set(v, i) (((v)->counter) = i)
#define ATOMIC_OP_RETURN(op, asm_op, asm_con) \
static inline int __atomic_##op##_return(int i, atomic_t *v) \
{ \
int result; \
\
asm volatile( \
"/* atomic_" #op "_return */\n" \
"1: ssrf 5\n" \
" ld.w %0, %2\n" \
" " #asm_op " %0, %3\n" \
" stcond %1, %0\n" \
" brne 1b" \
: "=&r" (result), "=o" (v->counter) \
: "m" (v->counter), #asm_con (i) \
: "cc"); \
\
return result; \
}
ATOMIC_OP_RETURN(sub, sub, rKs21)
ATOMIC_OP_RETURN(add, add, r)
#undef ATOMIC_OP_RETURN
/* /*
* atomic_sub_return - subtract the atomic variable * Probably found the reason why we want to use sub with the signed 21-bit
* @i: integer value to subtract * limit, it uses one less register than the add instruction that can add up to
* @v: pointer of type atomic_t * 32-bit values.
* *
* Atomically subtracts @i from @v. Returns the resulting value. * Both instructions are 32-bit, to use a 16-bit instruction the immediate is
* very small; 4 bit.
*
* sub 32-bit, type IV, takes a register and subtracts a 21-bit immediate.
* add 32-bit, type II, adds two register values together.
*/ */
static inline int atomic_sub_return(int i, atomic_t *v) #define IS_21BIT_CONST(i) \
{ (__builtin_constant_p(i) && ((i) >= -1048575) && ((i) <= 1048576))
int result;
asm volatile(
"/* atomic_sub_return */\n"
"1: ssrf 5\n"
" ld.w %0, %2\n"
" sub %0, %3\n"
" stcond %1, %0\n"
" brne 1b"
: "=&r"(result), "=o"(v->counter)
: "m"(v->counter), "rKs21"(i)
: "cc");
return result;
}
/* /*
* atomic_add_return - add integer to atomic variable * atomic_add_return - add integer to atomic variable
...@@ -56,51 +69,25 @@ static inline int atomic_sub_return(int i, atomic_t *v) ...@@ -56,51 +69,25 @@ static inline int atomic_sub_return(int i, atomic_t *v)
*/ */
static inline int atomic_add_return(int i, atomic_t *v) static inline int atomic_add_return(int i, atomic_t *v)
{ {
int result; if (IS_21BIT_CONST(i))
return __atomic_sub_return(-i, v);
if (__builtin_constant_p(i) && (i >= -1048575) && (i <= 1048576)) return __atomic_add_return(i, v);
result = atomic_sub_return(-i, v);
else
asm volatile(
"/* atomic_add_return */\n"
"1: ssrf 5\n"
" ld.w %0, %1\n"
" add %0, %3\n"
" stcond %2, %0\n"
" brne 1b"
: "=&r"(result), "=o"(v->counter)
: "m"(v->counter), "r"(i)
: "cc", "memory");
return result;
} }
/* /*
* atomic_sub_unless - sub unless the number is a given value * atomic_sub_return - subtract the atomic variable
* @i: integer value to subtract
* @v: pointer of type atomic_t * @v: pointer of type atomic_t
* @a: the amount to subtract from v...
* @u: ...unless v is equal to u.
* *
* Atomically subtract @a from @v, so long as it was not @u. * Atomically subtracts @i from @v. Returns the resulting value.
* Returns the old value of @v. */
*/ static inline int atomic_sub_return(int i, atomic_t *v)
static inline void atomic_sub_unless(atomic_t *v, int a, int u)
{ {
int tmp; if (IS_21BIT_CONST(i))
return __atomic_sub_return(i, v);
asm volatile( return __atomic_add_return(-i, v);
"/* atomic_sub_unless */\n"
"1: ssrf 5\n"
" ld.w %0, %2\n"
" cp.w %0, %4\n"
" breq 1f\n"
" sub %0, %3\n"
" stcond %1, %0\n"
" brne 1b\n"
"1:"
: "=&r"(tmp), "=o"(v->counter)
: "m"(v->counter), "rKs21"(a), "rKs21"(u)
: "cc", "memory");
} }
/* /*
...@@ -116,9 +103,21 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) ...@@ -116,9 +103,21 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
{ {
int tmp, old = atomic_read(v); int tmp, old = atomic_read(v);
if (__builtin_constant_p(a) && (a >= -1048575) && (a <= 1048576)) if (IS_21BIT_CONST(a)) {
atomic_sub_unless(v, -a, u); asm volatile(
else { "/* __atomic_sub_unless */\n"
"1: ssrf 5\n"
" ld.w %0, %2\n"
" cp.w %0, %4\n"
" breq 1f\n"
" sub %0, %3\n"
" stcond %1, %0\n"
" brne 1b\n"
"1:"
: "=&r"(tmp), "=o"(v->counter)
: "m"(v->counter), "rKs21"(-a), "rKs21"(u)
: "cc", "memory");
} else {
asm volatile( asm volatile(
"/* __atomic_add_unless */\n" "/* __atomic_add_unless */\n"
"1: ssrf 5\n" "1: ssrf 5\n"
...@@ -137,6 +136,8 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) ...@@ -137,6 +136,8 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
return old; return old;
} }
#undef IS_21BIT_CONST
/* /*
* atomic_sub_if_positive - conditionally subtract integer from atomic variable * atomic_sub_if_positive - conditionally subtract integer from atomic variable
* @i: integer value to subtract * @i: integer value to subtract
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment