Merge with Rusty 'trivial' Russell

MAINTAINERS

@@ -1493,7 +1493,7 @@ M:	perex@suse.cz
 L:	alsa-devel@alsa-project.org
 S:	Maintained
 
-SPARC:
+UltraSPARC (sparc64):
 P:	David S. Miller
 M:	davem@redhat.com
 P:	Eddie C. Dost
@@ -1506,6 +1506,9 @@ L:	sparclinux@vger.kernel.org
 L:	ultralinux@vger.kernel.org
 S:	Maintained
 
+SPARC (sparc32):
+S:	Unmaintained
+
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
 P:	Roger Wolff
 M:	R.E.Wolff@BitWizard.nl

arch/i386/kernel/apic.c

@@ -1140,7 +1140,7 @@ asmlinkage void smp_error_interrupt(void)
 	   6: Received illegal vector
 	   7: Illegal register address
 	*/
-	printk (KERN_ERR "APIC error on CPU%d: %02lx(%02lx)\n",
+	printk (KERN_INFO "APIC error on CPU%d: %02lx(%02lx)\n",
 	        smp_processor_id(), v , v1);
 	irq_exit();
 }

arch/i386/kernel/i386_ksyms.c

@@ -132,6 +132,7 @@ EXPORT_SYMBOL_NOVERS(__write_lock_failed);
 EXPORT_SYMBOL_NOVERS(__read_lock_failed);
 
 /* Global SMP stuff */
+EXPORT_SYMBOL(synchronize_irq);
 EXPORT_SYMBOL(smp_call_function);
 
 /* TLB flushing */

arch/i386/kernel/io_apic.c

@@ -791,7 +791,7 @@ void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
 	entry.vector = vector;
 
 	/*
-	 * The timer IRQ doesnt have to know that behind the
+	 * The timer IRQ doesn't have to know that behind the
 	 * scene we have a 8259A-master in AEOI mode ...
 	 */
 	irq_desc[0].handler = &ioapic_edge_irq_type;
@@ -1654,7 +1654,7 @@ static inline void check_timer(void)
 	printk(" failed.\n");
 
 	if (nmi_watchdog) {
-		printk(KERN_WARNING "timer doesnt work through the IO-APIC - disabling NMI Watchdog!\n");
+		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = 0;
 	}
 

arch/ia64/config.in

@@ -71,15 +71,15 @@ fi
 
 if [ "$CONFIG_IA64_SGI_SN1" = "y" -o  "$CONFIG_IA64_SGI_SN2" = "y" ]; then
 	define_bool CONFIG_IA64_SGI_SN y
-	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG n
+	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG
 	bool '  Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN_SIM
 	bool '  Enable autotest (llsc). Option to run cache test instead of booting' \
-			CONFIG_IA64_SGI_AUTOTEST n
+			CONFIG_IA64_SGI_AUTOTEST
 	define_bool CONFIG_DEVFS_FS y
 	if [ "$CONFIG_DEVFS_FS" = "y" ]; then
-	  bool '    Enable DEVFS Debug Code' CONFIG_DEVFS_DEBUG n
+	  bool '    Enable DEVFS Debug Code' CONFIG_DEVFS_DEBUG
 	fi
-	bool '  Enable protocol mode for the L1 console' CONFIG_SERIAL_SGI_L1_PROTOCOL y
+	bool '  Enable protocol mode for the L1 console' CONFIG_SERIAL_SGI_L1_PROTOCOL
 	define_bool CONFIG_DISCONTIGMEM y
 	define_bool CONFIG_IA64_MCA y
 	define_bool CONFIG_NUMA y

arch/ppc/8260_io/Config.in

@@ -26,7 +26,7 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
       choice 'Type of PHY'	\
 	"LXT970		CONFIG_FCC_LXT970	\
 	 LXT971		CONFIG_FCC_LXT971	\
-	 QS6612		CONFIG_FCC_QS6612"	CONFIG_FCC_LXT971
+	 QS6612		CONFIG_FCC_QS6612"	LXT971
       fi
   fi
 fi

drivers/char/drm/mga_drv.h

@@ -38,7 +38,7 @@ typedef struct drm_mga_primary_buffer {
 
 	u32 tail;
 	int space;
-	volatile int wrapped;
+	volatile long wrapped;
 
 	volatile u32 *status;
 

drivers/char/ftape/zftape/zftape-init.c

@@ -67,7 +67,7 @@ const ftape_info *zft_status;
 
 /*      Local vars.
  */
-static int busy_flag;
+static unsigned long busy_flag;
 
 static sigset_t orig_sigmask;
 

drivers/char/rocket.c

@@ -1881,13 +1881,21 @@ static int __init init_ISA(int i, int *reserved_controller)
 {
 	int	num_aiops, num_chan;
 	int	aiop, chan;
+	int     extent = 0;
 	unsigned int	aiopio[MAX_AIOPS_PER_BOARD];	
 	CONTROLLER_t	*ctlp;
 
 	if (rcktpt_io_addr[i] == 0)
 		return(0);
 
-	if (check_region(rcktpt_io_addr[i],64)) {
+	if (rcktpt_io_addr[i] + 0x40 == controller) {
+		*reserved_controller = 1;
+		extent = 68;
+	} else {
+		extent = 64;
+	}
+	if (!request_region(rcktpt_io_addr[i], extent,
+			    "Comtrol Rocketport")) {
 		printk("RocketPort board address 0x%lx in use...\n",
 		       rcktpt_io_addr[i]);
 		rcktpt_io_addr[i] = 0;
@@ -1901,6 +1909,7 @@ static int __init init_ISA(int i, int *reserved_controller)
 				    aiopio, MAX_AIOPS_PER_BOARD, 0,
 				    FREQ_DIS, 0);
 	if (num_aiops <= 0) {
+		release_region(rcktpt_io_addr[i], extent);
 		rcktpt_io_addr[i] = 0;
 		return(0);
 	}
@@ -1914,14 +1923,6 @@ static int __init init_ISA(int i, int *reserved_controller)
 	printk("Rocketport controller #%d found at 0x%lx, "
 	       "%d AIOPs\n", i, rcktpt_io_addr[i],
 	       num_aiops);
-	if (rcktpt_io_addr[i] + 0x40 == controller) {
-		*reserved_controller = 1;
-		request_region(rcktpt_io_addr[i], 68,
-				       "Comtrol Rocketport");
-	} else {
-		request_region(rcktpt_io_addr[i], 64,
-			       "Comtrol Rocketport");
-	}
 	return(1);
 }
 

drivers/isdn/hisax/Config.in

@@ -43,9 +43,9 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
    bool '  HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX
    if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
 #      bool '  TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
-      bool '  Formula-n enter:now PCI card' CONFIG_HISAX_ENTERNOW_PCI
+      bool '  Formula-n enter:now PCI card (EXPERIMENTAL)' CONFIG_HISAX_ENTERNOW_PCI
       if [ "$CONFIG_SPARC32" = "y" -o "$CONFIG_SPARC64" = "y" ]; then
-	 bool '  Am7930' CONFIG_HISAX_AMD7930
+	 bool '  Am7930 (EXPERIMENTAL)' CONFIG_HISAX_AMD7930
       fi
    fi
    bool '  HiSax debugging' CONFIG_HISAX_DEBUG

drivers/isdn/hysdn/boardergo.c

@@ -424,16 +424,19 @@ ergo_releasehardware(hysdn_card * card)
 int
 ergo_inithardware(hysdn_card * card)
 {
-	if (check_region(card->iobase + PCI9050_INTR_REG, 1) ||
-	    check_region(card->iobase + PCI9050_USER_IO, 1))
+	if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN")) 
+		return (-1);
+	if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
+		release_region(card->iobase + PCI9050_INTR_REG, 1);
 		return (-1);	/* ports already in use */
-
+	}
 	card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
-	if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE)))
+	if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
+		release_region(card->iobase + PCI9050_INTR_REG, 1);
+		release_region(card->iobase + PCI9050_USER_IO, 1);
 		return (-1);
+	}
 
-	request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN");
-	request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN");
 	ergo_stopcard(card);	/* disable interrupts */
 	if (request_irq(card->irq, ergo_interrupt, SA_SHIRQ, "HYSDN", card)) {
 		ergo_releasehardware(card); /* return the acquired hardware */

drivers/net/Config.in

@@ -273,7 +273,7 @@ if [ ! "$CONFIG_PPP" = "n" ]; then
       dep_tristate '  PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
    fi
    if [ ! "$CONFIG_ATM" = "n" ]; then
-      dep_tristate '  PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP
+      dep_tristate '  PPP over ATM' CONFIG_PPPOATM $CONFIG_PPP
    fi
 fi
 

drivers/net/Makefile.lib

@@ -25,7 +25,7 @@ obj-$(CONFIG_PCMCIA_XIRTULIP)	+= crc32.o
 obj-$(CONFIG_PCNET32)		+= crc32.o
 obj-$(CONFIG_SIS900)		+= crc32.o
 obj-$(CONFIG_SMC9194)		+= crc32.o
-obj-$(CONFIG_STARFIRE)		+= crc32.o
+obj-$(CONFIG_ADAPTEC_STARFIRE)	+= crc32.o
 obj-$(CONFIG_SUNBMAC)		+= crc32.o
 obj-$(CONFIG_SUNDANCE)		+= crc32.o
 obj-$(CONFIG_SUNGEM)		+= crc32.o

drivers/net/au1000_eth.c

@@ -819,9 +819,9 @@ au1000_probe1(struct net_device *dev, long ioaddr, int irq, int port_num)
 				MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS));
 	if (dev->priv != NULL)
 		kfree(dev->priv);
-	kfree(dev);
 	printk(KERN_ERR "%s: au1000_probe1 failed.  Returns %d\n",
 	       dev->name, retval);
+	kfree(dev);
 	return retval;
 }
 

drivers/net/hamradio/baycom_ser_hdx.c

@@ -476,19 +476,22 @@ static int ser12_open(struct net_device *dev)
 	if (!dev->base_addr || dev->base_addr > 0x1000-SER12_EXTENT ||
 	    dev->irq < 2 || dev->irq > 15)
 		return -ENXIO;
-	if (check_region(dev->base_addr, SER12_EXTENT))
+	if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser12"))
 		return -EACCES;
 	memset(&bc->modem, 0, sizeof(bc->modem));
 	bc->hdrv.par.bitrate = 1200;
-	if ((u = ser12_check_uart(dev->base_addr)) == c_uart_unknown)
+	if ((u = ser12_check_uart(dev->base_addr)) == c_uart_unknown) {
+		release_region(dev->base_addr, SER12_EXTENT);       
 		return -EIO;
+	}
 	outb(0, FCR(dev->base_addr));  /* disable FIFOs */
 	outb(0x0d, MCR(dev->base_addr));
 	outb(0, IER(dev->base_addr));
 	if (request_irq(dev->irq, ser12_interrupt, SA_INTERRUPT | SA_SHIRQ,
-			"baycom_ser12", dev))
+			"baycom_ser12", dev)) {
+		release_region(dev->base_addr, SER12_EXTENT);       
 		return -EBUSY;
-	request_region(dev->base_addr, SER12_EXTENT, "baycom_ser12");
+	}
 	/*
 	 * enable transmitter empty interrupt
 	 */

drivers/net/irda/Config.in

@@ -19,20 +19,20 @@ if [ "$CONFIG_DONGLE" != "n" ]; then
       dep_tristate '  EP7211 I/R support' CONFIG_EP7211_IR $CONFIG_IRDA
    fi
    if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-      dep_tristate '  ACTiSYS IR-200L dongle (Experimental)' CONFIG_ACT200L_DONGLE $CONFIG_IRDA
-      dep_tristate '  Mobile Action MA600 dongle (Experimental)' CONFIG_MA600_DONGLE $CONFIG_IRDA
+      dep_tristate '  ACTiSYS IR-200L dongle (EXPERIMENTAL)' CONFIG_ACT200L_DONGLE $CONFIG_IRDA
+      dep_tristate '  Mobile Action MA600 dongle (EXPERIMENTAL)' CONFIG_MA600_DONGLE $CONFIG_IRDA
    fi
 fi
 
 comment 'FIR device drivers'
-dep_tristate 'IrDA USB dongles (Experimental)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL
+dep_tristate 'IrDA USB dongles (EXPERIMENTAL)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL
 dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR  $CONFIG_IRDA
 dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA
 dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
 if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
-dep_tristate 'SMC IrCC (Experimental)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
-dep_tristate 'ALi M5123 FIR (Experimental)' CONFIG_ALI_FIR $CONFIG_IRDA
-dep_tristate 'VLSI 82C147 SIR/MIR/FIR (Experimental)' CONFIG_VLSI_FIR $CONFIG_IRDA
+dep_tristate 'SMC IrCC (EXPERIMENTAL)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
+dep_tristate 'ALi M5123 FIR (EXPERIMENTAL)' CONFIG_ALI_FIR $CONFIG_IRDA
+dep_tristate 'VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)' CONFIG_VLSI_FIR $CONFIG_IRDA
 fi
 if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
    dep_tristate 'SA1100 Internal IR' CONFIG_SA1100_FIR $CONFIG_IRDA

drivers/scsi/scsi_error.c

@@ -1878,6 +1878,7 @@ void scsi_error_handler(void *data)
 	 */
 
 	daemonize();
+	reparent_to_init();
 
 	/*
 	 * Set the name of this process.

drivers/video/modedb.c

@@ -110,10 +110,6 @@ static const struct fb_videomode modedb[] __initdata = {
 	/* 1280x1024 @ 87 Hz interlaced, 51 kHz hsync */
 	NULL, 87, 1280, 1024, 12500, 56, 16, 128, 1, 216, 12,
 	0, FB_VMODE_INTERLACED
-    }, {
-	/* 1400x1050 @ 60Hz, 63.9 kHz hsync */
-	NULL, 68, 1400, 1050, 9259, 136, 40, 13, 1, 112, 3,
-	0, FB_VMODE_NONINTERLACED
     }, {
 	/* 800x600 @ 100 Hz, 64.02 kHz hsync */
 	NULL, 100, 800, 600, 14357, 160, 64, 30, 4, 64, 6,

fs/Config.in

@@ -26,7 +26,7 @@ dep_tristate 'Apple Macintosh file system support (EXPERIMENTAL)' CONFIG_HFS_FS
 
 dep_tristate 'BFS file system support (EXPERIMENTAL)' CONFIG_BFS_FS $CONFIG_EXPERIMENTAL
 
-tristate 'Ext3 journalling file system support (EXPERIMENTAL)' CONFIG_EXT3_FS
+tristate 'Ext3 journalling file system support' CONFIG_EXT3_FS
 # CONFIG_JBD could be its own option (even modular), but until there are
 # other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
 # dep_tristate '  Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS

fs/smbfs/smbiod.c

@@ -269,6 +269,7 @@ static void smbiod_doio(struct smb_sb_info *server)
 		set_bit(SMBIOD_DATA_READY, &smbiod_flags);
 
 out:
+	return;
 }
 
 /*

fs/ufs/super.c

@@ -673,7 +673,7 @@ static int ufs_fill_super(struct super_block *sb, void *data, int silent)
 	}
 	if (uspi->s_bsize < 4096) {
 		printk("ufs_read_super: block size %u is too small\n",
-			uspi->s_fsize);
+			uspi->s_bsize);
 		goto failed;
 	}
 	if (uspi->s_bsize / uspi->s_fsize > 8) {

include/asm-alpha/socket.h

@@ -3,7 +3,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 /*
  * Note: we only bother about making the SOL_SOCKET options
  * same as OSF/1, as that's all that "normal" programs are

include/asm-arm/socket.h

@@ -3,7 +3,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-i386/socket.h

@@ -3,7 +3,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-i386/spinlock.h

@@ -39,7 +39,7 @@ typedef struct {
  * We make no fairness assumptions. They have a cost.
  */
 
-#define spin_is_locked(x)	(*(volatile char *)(&(x)->lock) <= 0)
+#define spin_is_locked(x)	(*(volatile signed char *)(&(x)->lock) <= 0)
 #define spin_unlock_wait(x)	do { barrier(); } while(spin_is_locked(x))
 
 #define spin_lock_string \

include/asm-ia64/socket.h

@@ -10,7 +10,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-m68k/socket.h

@@ -3,7 +3,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-mips/socket.h

@@ -4,7 +4,7 @@
 #include <asm/sockios.h>
 
 /*
- * For setsockoptions(2)
+ * For setsockopt(2)
  *
  * This defines are ABI conformant as far as Linux supports these ...
  */

include/asm-mips64/socket.h

@@ -12,7 +12,7 @@
 #include <asm/sockios.h>
 
 /*
- * For setsockoptions(2)
+ * For setsockopt(2)
  *
  * This defines are ABI conformant as far as Linux supports these ...
  */

include/asm-parisc/socket.h

@@ -3,7 +3,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	0xffff
 
 #define SO_DEBUG	0x0001

include/asm-ppc/socket.h

@@ -12,7 +12,7 @@
 #define SIOCATMARK	0x8905
 #define SIOCGSTAMP	0x8906		/* Get stamp */
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-s390/socket.h

@@ -11,7 +11,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-sh/socket.h

@@ -3,7 +3,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	1
 
 #define SO_DEBUG	1

include/asm-sparc/socket.h

@@ -4,7 +4,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	0xffff
 
 #define SO_DEBUG	0x0001

include/asm-sparc64/socket.h

@@ -4,7 +4,7 @@
 
 #include <asm/sockios.h>
 
-/* For setsockoptions(2) */
+/* For setsockopt(2) */
 #define SOL_SOCKET	0xffff
 
 #define SO_DEBUG	0x0001

include/linux/dqblk_xfs.h

@@ -30,8 +30,8 @@
  *
  * http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
  */
-#ifndef _LINUX_XQM_H
-#define _LINUX_XQM_H
+#ifndef _LINUX_DQBLK_XFS_H
+#define _LINUX_DQBLK_XFS_H
 
 #include <linux/types.h>
 
@@ -156,4 +156,4 @@ typedef struct fs_quota_stat {
 	__u16		qs_iwarnlimit;	/* limit for num warnings */
 } fs_quota_stat_t;
 
-#endif	/* _LINUX_XQM_H */
+#endif	/* _LINUX_DQBLK_XFS_H */

include/linux/mm.h

@@ -401,8 +401,6 @@ extern void swapin_readahead(swp_entry_t);
 extern int can_share_swap_page(struct page *);
 extern int remove_exclusive_swap_page(struct page *);
 
-extern void __free_pte(pte_t);
-
 /* mmap.c */
 extern void lock_vma_mappings(struct vm_area_struct *);
 extern void unlock_vma_mappings(struct vm_area_struct *);

include/linux/signal.h

@@ -221,6 +221,7 @@ static inline void init_sigpending(struct sigpending *sig)
 extern long do_sigpending(void *, unsigned long);
 
 #ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER
+struct pt_regs;
 extern int get_signal_to_deliver(siginfo_t *info, struct pt_regs *regs);
 #endif
 

kernel/futex.c

@@ -245,8 +245,8 @@ static unsigned int futex_poll(struct file *filp,
 }
 
 static struct file_operations futex_fops = {
-	release:	futex_close,
-	poll:		futex_poll,
+	.release	= futex_close,
+	.poll		= futex_poll,
 };
 
 /* Signal allows caller to avoid the race which would occur if they
@@ -357,8 +357,8 @@ futexfs_get_sb(struct file_system_type *fs_type,
 }
 
 static struct file_system_type futex_fs_type = {
-	name:		"futexfs",
-	get_sb:		futexfs_get_sb,
+	.name		= "futexfs",
+	.get_sb		= futexfs_get_sb,
 };
 
 static int __init init(void)

kernel/kmod.c

@@ -346,15 +346,15 @@ int call_usermodehelper(char *path, char **argv, char **envp)
 {
 	DECLARE_COMPLETION(work);
 	struct subprocess_info sub_info = {
-		complete:	&work,
-		path:		path,
-		argv:		argv,
-		envp:		envp,
-		retval:		0,
+		.complete	= &work,
+		.path		= path,
+		.argv		= argv,
+		.envp		= envp,
+		.retval		= 0,
 	};
 	struct tq_struct tqs = {
-		routine:	__call_usermodehelper,
-		data:		&sub_info,
+		.routine	= __call_usermodehelper,
+		.data		= &sub_info,
 	};
 
 	if (path[0] == '\0')

kernel/module.c

@@ -44,15 +44,15 @@ extern const char __stop___kallsyms[] __attribute__ ((weak));
 
 struct module kernel_module =
 {
-	size_of_struct:		sizeof(struct module),
-	name: 			"",
-	uc:	 		{ATOMIC_INIT(1)},
-	flags:			MOD_RUNNING,
-	syms:			__start___ksymtab,
-	ex_table_start:		__start___ex_table,
-	ex_table_end:		__stop___ex_table,
-	kallsyms_start:		__start___kallsyms,
-	kallsyms_end:		__stop___kallsyms,
+	.size_of_struct		= sizeof(struct module),
+	.name 			= "",
+	.uc	 		= {ATOMIC_INIT(1)},
+	.flags			= MOD_RUNNING,
+	.syms			= __start___ksymtab,
+	.ex_table_start		= __start___ex_table,
+	.ex_table_end		= __stop___ex_table,
+	.kallsyms_start		= __start___kallsyms,
+	.kallsyms_end		= __stop___kallsyms,
 };
 
 struct module *module_list = &kernel_module;
@@ -1132,10 +1132,10 @@ static int m_show(struct seq_file *m, void *p)
 	return 0;
 }
 struct seq_operations modules_op = {
-	start:	m_start,
-	next:	m_next,
-	stop:	m_stop,
-	show:	m_show
+	.start	= m_start,
+	.next	= m_next,
+	.stop	= m_stop,
+	.show	= m_show
 };
 
 /*
@@ -1214,10 +1214,10 @@ static int s_show(struct seq_file *m, void *p)
 }
 
 struct seq_operations ksyms_op = {
-	start:	s_start,
-	next:	s_next,
-	stop:	s_stop,
-	show:	s_show
+	.start	= s_start,
+	.next	= s_next,
+	.stop	= s_stop,
+	.show	= s_show
 };
 
 #else		/* CONFIG_MODULES */

kernel/platform.c

@@ -23,13 +23,13 @@ int default_suspend(int state, int flags)
 }
 
 static struct platform_t default_platform = {
-	name:		"Default Platform",
-	suspend_states:	0,
-	reboot:		default_reboot,
-	halt:		default_halt,
-	power_off:	default_halt,
-	suspend:	default_suspend,
-	idle:		default_idle,
+	.name		= "Default Platform",
+	.suspend_states	= 0,
+	.reboot		= default_reboot,
+	.halt		= default_halt,
+	.power_off	= default_halt,
+	.suspend	= default_suspend,
+	.idle		= default_idle,
 };
 
 struct platform_t * platform = &default_platform;

kernel/sched.c

@@ -1963,7 +1963,7 @@ void set_cpus_allowed(task_t *p, unsigned long new_mask)
  */
 static int migration_thread(void * data)
 {
-	struct sched_param param = { sched_priority: MAX_RT_PRIO-1 };
+	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
 	int cpu = (long) data;
 	runqueue_t *rq;
 	int ret;

kernel/sys.c

@@ -391,7 +391,7 @@ static void deferred_cad(void *dummy)
 void ctrl_alt_del(void)
 {
 	static struct tq_struct cad_tq = {
-		routine: deferred_cad,
+		.routine = deferred_cad,
 	};
 
 	if (C_A_D)

kernel/sysctl.c

@@ -126,12 +126,12 @@ static ssize_t proc_writesys(struct file *, const char *, size_t, loff_t *);
 static int proc_sys_permission(struct inode *, int);
 
 struct file_operations proc_sys_file_operations = {
-	read:		proc_readsys,
-	write:		proc_writesys,
+	.read		= proc_readsys,
+	.write		= proc_writesys,
 };
 
 static struct inode_operations proc_sys_inode_operations = {
-	permission:	proc_sys_permission,
+	.permission	= proc_sys_permission,
 };
 
 extern struct proc_dir_entry *proc_sys_root;

kernel/user.c

@@ -28,9 +28,9 @@ static struct list_head uidhash_table[UIDHASH_SZ];
 static spinlock_t uidhash_lock = SPIN_LOCK_UNLOCKED;
 
 struct user_struct root_user = {
-	__count:	ATOMIC_INIT(1),
-	processes:	ATOMIC_INIT(1),
-	files:		ATOMIC_INIT(0)
+	.__count	= ATOMIC_INIT(1),
+	.processes	= ATOMIC_INIT(1),
+	.files		= ATOMIC_INIT(0)
 };
 
 /*

mm/slab.c

@@ -126,7 +126,7 @@
  * Bufctl's are used for linking objs within a slab
  * linked offsets.
  *
- * This implementaion relies on "struct page" for locating the cache &
+ * This implementation relies on "struct page" for locating the cache &
  * slab an object belongs to.
  * This allows the bufctl structure to be small (one int), but limits
  * the number of objects a slab (not a cache) can contain when off-slab

net/ipv4/ipconfig.c

@@ -469,7 +469,7 @@ ic_rarp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 
 
 /*
- *  Send RARP request packet over a signle interface.
+ *  Send RARP request packet over a single interface.
  */
 static void __init ic_rarp_send_if(struct ic_device *d)
 {

net/sched/sch_ingress.c

@@ -106,7 +106,7 @@ static int ingress_change(struct Qdisc *sch, u32 classid, u32 parent,
 #endif
 	DPRINTK("ingress_change(sch %p,[qdisc %p],classid %x,parent %x),"
 		"arg 0x%lx\n", sch, p, classid, parent, *arg);
-	DPRINTK("No effect. sch_ingress doesnt maintain classes at the moment");
+	DPRINTK("No effect. sch_ingress doesn't maintain classes at the moment");
 	return 0;
 }
 
@@ -118,7 +118,7 @@ static void ingress_walk(struct Qdisc *sch,struct qdisc_walker *walker)
 	struct ingress_qdisc_data *p = PRIV(sch);
 #endif
 	DPRINTK("ingress_walk(sch %p,[qdisc %p],walker %p)\n", sch, p, walker);
-	DPRINTK("No effect. sch_ingress doesnt maintain classes at the moment");
+	DPRINTK("No effect. sch_ingress doesn't maintain classes at the moment");
 }