Merge tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing tools updates from Steven Rostedt:

 - Use total duration to calculate average in rtla osnoise_hist

 - Use 2 digit precision for displaying average

 - Print an intuitive auto analysis of timerlat results

 - Add auto analysis to timerlat top

 - Add hwnoise, which is the same as osnoise but focuses on hardware

 - Small clean ups

* tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation/rtla: Add hwnoise man page
  rtla: Add hwnoise tool
  Documentation/rtla: Add timerlat-top auto-analysis options
  rtla/timerlat: Add auto-analysis support to timerlat top
  rtla/timerlat: Add auto-analysis core
  tools/tracing/rtla: osnoise_hist: display average with two-digit precision
  tools/tracing/rtla: osnoise_hist: use total duration for average calculation
  tools/rv: Remove unneeded semicolon

Documentation/tools/rtla/common_timerlat_aa.rst

+**--dump-tasks**
+
+        prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)
+
+**--no-aa**
+
+        disable auto-analysis, reducing rtla timerlat cpu usage

Documentation/tools/rtla/index.rst

@@ -17,6 +17,7 @@ behavior on specific hardware.
    rtla-timerlat
    rtla-timerlat-hist
    rtla-timerlat-top
+   rtla-hwnoise
 
 .. only::  subproject and html
 

Documentation/tools/rtla/rtla-hwnoise.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+============
+rtla-hwnoise
+============
+------------------------------------------
+Detect and quantify hardware-related noise
+------------------------------------------
+
+:Manual section: 1
+
+SYNOPSIS
+========
+
+**rtla hwnoise** [*OPTIONS*]
+
+DESCRIPTION
+===========
+
+**rtla hwnoise** collects the periodic summary from the *osnoise* tracer
+running with *interrupts disabled*. By disabling interrupts, and the scheduling
+of threads as a consequence, only non-maskable interrupts and hardware-related
+noise is allowed.
+
+The tool also allows the configurations of the *osnoise* tracer and the
+collection of the tracer output.
+
+OPTIONS
+=======
+.. include:: common_osnoise_options.rst
+
+.. include:: common_top_options.rst
+
+.. include:: common_options.rst
+
+EXAMPLE
+=======
+In the example below, the **rtla hwnoise** tool is set to run on CPUs *1-7*
+on a system with 8 cores/16 threads with hyper-threading enabled.
+
+The tool is set to detect any noise higher than *one microsecond*,
+to run for *ten minutes*, displaying a summary of the report at the
+end of the session::
+
+  # rtla hwnoise -c 1-7 -T 1 -d 10m -q
+                                          Hardware-related Noise
+  duration:   0 00:10:00 | time is in us
+  CPU Period       Runtime        Noise  % CPU Aval   Max Noise   Max Single          HW          NMI
+    1 #599       599000000          138    99.99997           3            3           4           74
+    2 #599       599000000           85    99.99998           3            3           4           75
+    3 #599       599000000           86    99.99998           4            3           6           75
+    4 #599       599000000           81    99.99998           4            4           2           75
+    5 #599       599000000           85    99.99998           2            2           2           75
+    6 #599       599000000           76    99.99998           2            2           0           75
+    7 #599       599000000           77    99.99998           3            3           0           75
+
+
+The first column shows the *CPU*, and the second column shows how many
+*Periods* the tool ran during the session. The *Runtime* is the time
+the tool effectively runs on the CPU. The *Noise* column is the sum of
+all noise that the tool observed, and the *% CPU Aval* is the relation
+between the *Runtime* and *Noise*.
+
+The *Max Noise* column is the maximum hardware noise the tool detected in a
+single period, and the *Max Single* is the maximum single noise seen.
+
+The *HW* and *NMI* columns show the total number of *hardware* and *NMI* noise
+occurrence observed by the tool.
+
+For example, *CPU 3* ran *599* periods of *1 second Runtime*. The CPU received
+*86 us* of noise during the entire execution, leaving *99.99997 %* of CPU time
+for the application. In the worst single period, the CPU caused *4 us* of
+noise to the application, but it was certainly caused by more than one single
+noise, as the *Max Single* noise was of *3 us*. The CPU has *HW noise,* at a
+rate of *six occurrences*/*ten minutes*. The CPU also has *NMIs*, at a higher
+frequency: around *seven per second*.
+
+The tool should report *0* hardware-related noise in the ideal situation.
+For example, by disabling hyper-threading to remove the hardware noise,
+and disabling the TSC watchdog to remove the NMI (it is possible to identify
+this using tracing options of **rtla hwnoise**), it was possible to reach
+the ideal situation in the same hardware::
+
+  # rtla hwnoise -c 1-7 -T 1 -d 10m -q
+                                          Hardware-related Noise
+  duration:   0 00:10:00 | time is in us
+  CPU Period       Runtime        Noise  % CPU Aval   Max Noise   Max Single          HW          NMI
+    1 #599       599000000            0   100.00000           0            0           0            0
+    2 #599       599000000            0   100.00000           0            0           0            0
+    3 #599       599000000            0   100.00000           0            0           0            0
+    4 #599       599000000            0   100.00000           0            0           0            0
+    5 #599       599000000            0   100.00000           0            0           0            0
+    6 #599       599000000            0   100.00000           0            0           0            0
+    7 #599       599000000            0   100.00000           0            0           0            0
+
+SEE ALSO
+========
+
+**rtla-osnoise**\(1)
+
+Osnoise tracer documentation: <https://www.kernel.org/doc/html/latest/trace/osnoise-tracer.html>
+
+AUTHOR
+======
+Written by Daniel Bristot de Oliveira <bristot@kernel.org>
+
+.. include:: common_appendix.rst

tools/tracing/rtla/Makefile

@@ -119,6 +119,8 @@ install: doc_install
 	$(STRIP) $(DESTDIR)$(BINDIR)/rtla
 	@test ! -f $(DESTDIR)$(BINDIR)/osnoise || rm $(DESTDIR)$(BINDIR)/osnoise
 	ln -s rtla $(DESTDIR)$(BINDIR)/osnoise
+	@test ! -f $(DESTDIR)$(BINDIR)/hwnoise || rm $(DESTDIR)$(BINDIR)/hwnoise
+	ln -s rtla $(DESTDIR)$(BINDIR)/hwnoise
 	@test ! -f $(DESTDIR)$(BINDIR)/timerlat || rm $(DESTDIR)$(BINDIR)/timerlat
 	ln -s rtla $(DESTDIR)$(BINDIR)/timerlat
 

tools/tracing/rtla/src/osnoise.c

@@ -734,6 +734,113 @@ void osnoise_put_tracing_thresh(struct osnoise_context *context)
 	context->orig_tracing_thresh = OSNOISE_OPTION_INIT_VAL;
 }
 
+static int osnoise_options_get_option(char *option)
+{
+	char *options = tracefs_instance_file_read(NULL, "osnoise/options", NULL);
+	char no_option[128];
+	int retval = 0;
+	char *opt;
+
+	if (!options)
+		return OSNOISE_OPTION_INIT_VAL;
+
+	/*
+	 * Check first if the option is disabled.
+	 */
+	snprintf(no_option, sizeof(no_option), "NO_%s", option);
+
+	opt = strstr(options, no_option);
+	if (opt)
+		goto out_free;
+
+	/*
+	 * Now that it is not disabled, if the string is there, it is
+	 * enabled. If the string is not there, the option does not exist.
+	 */
+	opt = strstr(options, option);
+	if (opt)
+		retval = 1;
+	else
+		retval = OSNOISE_OPTION_INIT_VAL;
+
+out_free:
+	free(options);
+	return retval;
+}
+
+static int osnoise_options_set_option(char *option, bool onoff)
+{
+	char no_option[128];
+
+	if (onoff)
+		return tracefs_instance_file_write(NULL, "osnoise/options", option);
+
+	snprintf(no_option, sizeof(no_option), "NO_%s", option);
+
+	return tracefs_instance_file_write(NULL, "osnoise/options", no_option);
+}
+
+static int osnoise_get_irq_disable(struct osnoise_context *context)
+{
+	if (context->opt_irq_disable != OSNOISE_OPTION_INIT_VAL)
+		return context->opt_irq_disable;
+
+	if (context->orig_opt_irq_disable != OSNOISE_OPTION_INIT_VAL)
+		return context->orig_opt_irq_disable;
+
+	context->orig_opt_irq_disable = osnoise_options_get_option("OSNOISE_IRQ_DISABLE");
+
+	return context->orig_opt_irq_disable;
+}
+
+int osnoise_set_irq_disable(struct osnoise_context *context, bool onoff)
+{
+	int opt_irq_disable = osnoise_get_irq_disable(context);
+	int retval;
+
+	if (opt_irq_disable == OSNOISE_OPTION_INIT_VAL)
+		return -1;
+
+	if (opt_irq_disable == onoff)
+		return 0;
+
+	retval = osnoise_options_set_option("OSNOISE_IRQ_DISABLE", onoff);
+	if (retval < 0)
+		return -1;
+
+	context->opt_irq_disable = onoff;
+
+	return 0;
+}
+
+static void osnoise_restore_irq_disable(struct osnoise_context *context)
+{
+	int retval;
+
+	if (context->orig_opt_irq_disable == OSNOISE_OPTION_INIT_VAL)
+		return;
+
+	if (context->orig_opt_irq_disable == context->opt_irq_disable)
+		goto out_done;
+
+	retval = osnoise_options_set_option("OSNOISE_IRQ_DISABLE", context->orig_opt_irq_disable);
+	if (retval < 0)
+		err_msg("Could not restore original OSNOISE_IRQ_DISABLE option\n");
+
+out_done:
+	context->orig_opt_irq_disable = OSNOISE_OPTION_INIT_VAL;
+}
+
+static void osnoise_put_irq_disable(struct osnoise_context *context)
+{
+	osnoise_restore_irq_disable(context);
+
+	if (context->orig_opt_irq_disable == OSNOISE_OPTION_INIT_VAL)
+		return;
+
+	context->orig_opt_irq_disable = OSNOISE_OPTION_INIT_VAL;
+}
+
 /*
  * enable_osnoise - enable osnoise tracer in the trace_instance
  */
@@ -798,6 +905,9 @@ struct osnoise_context *osnoise_context_alloc(void)
 	context->orig_tracing_thresh	= OSNOISE_OPTION_INIT_VAL;
 	context->tracing_thresh		= OSNOISE_OPTION_INIT_VAL;
 
+	context->orig_opt_irq_disable	= OSNOISE_OPTION_INIT_VAL;
+	context->opt_irq_disable	= OSNOISE_OPTION_INIT_VAL;
+
 	osnoise_get_context(context);
 
 	return context;
@@ -824,6 +934,7 @@ void osnoise_put_context(struct osnoise_context *context)
 	osnoise_put_timerlat_period_us(context);
 	osnoise_put_print_stack(context);
 	osnoise_put_tracing_thresh(context);
+	osnoise_put_irq_disable(context);
 
 	free(context);
 }
@@ -958,3 +1069,9 @@ int osnoise_main(int argc, char *argv[])
 	osnoise_usage(1);
 	exit(1);
 }
+
+int hwnoise_main(int argc, char *argv[])
+{
+	osnoise_top_main(argc, argv);
+	exit(0);
+}

tools/tracing/rtla/src/osnoise.h

@@ -38,6 +38,10 @@ struct osnoise_context {
 	/* -1 as init value because 0 is disabled */
 	long long		orig_print_stack;
 	long long		print_stack;
+
+	/* -1 as init value because 0 is off */
+	int			orig_opt_irq_disable;
+	int			opt_irq_disable;
 };
 
 /*
@@ -79,6 +83,8 @@ void osnoise_restore_print_stack(struct osnoise_context *context);
 int osnoise_set_print_stack(struct osnoise_context *context,
 			    long long print_stack);
 
+int osnoise_set_irq_disable(struct osnoise_context *context, bool onoff);
+
 /*
  * osnoise_tool -  osnoise based tool definition.
  */
@@ -97,3 +103,4 @@ struct osnoise_tool *osnoise_init_trace_tool(char *tracer);
 int osnoise_hist_main(int argc, char *argv[]);
 int osnoise_top_main(int argc, char **argv);
 int osnoise_main(int argc, char **argv);
+int hwnoise_main(int argc, char **argv);

tools/tracing/rtla/src/osnoise_hist.c

@@ -121,6 +121,7 @@ static void osnoise_hist_update_multiple(struct osnoise_tool *tool, int cpu,
 {
 	struct osnoise_hist_params *params = tool->params;
 	struct osnoise_hist_data *data = tool->data;
+	unsigned long long total_duration;
 	int entries = data->entries;
 	int bucket;
 	int *hist;
@@ -131,10 +132,12 @@ static void osnoise_hist_update_multiple(struct osnoise_tool *tool, int cpu,
 	if (data->bucket_size)
 		bucket = duration / data->bucket_size;
 
+	total_duration = duration * count;
+
 	hist = data->hist[cpu].samples;
 	data->hist[cpu].count += count;
 	update_min(&data->hist[cpu].min_sample, &duration);
-	update_sum(&data->hist[cpu].sum_sample, &duration);
+	update_sum(&data->hist[cpu].sum_sample, &total_duration);
 	update_max(&data->hist[cpu].max_sample, &duration);
 
 	if (bucket < entries)
@@ -332,8 +335,8 @@ osnoise_print_summary(struct osnoise_hist_params *params,
 			continue;
 
 		if (data->hist[cpu].count)
-			trace_seq_printf(trace->seq, "%9llu ",
-					data->hist[cpu].sum_sample / data->hist[cpu].count);
+			trace_seq_printf(trace->seq, "%9.2f ",
+				((double) data->hist[cpu].sum_sample) / data->hist[cpu].count);
 		else
 			trace_seq_printf(trace->seq, "        - ");
 	}

tools/tracing/rtla/src/osnoise_top.c

@@ -14,6 +14,11 @@
 #include "osnoise.h"
 #include "utils.h"
 
+enum osnoise_mode {
+	MODE_OSNOISE = 0,
+	MODE_HWNOISE
+};
+
 /*
  * osnoise top parameters
  */
@@ -32,6 +37,7 @@ struct osnoise_top_params {
 	int			set_sched;
 	struct sched_attr	sched_param;
 	struct trace_events	*events;
+	enum osnoise_mode	mode;
 };
 
 struct osnoise_top_cpu {
@@ -143,14 +149,22 @@ osnoise_top_handler(struct trace_seq *s, struct tep_record *record,
  */
 static void osnoise_top_header(struct osnoise_tool *top)
 {
+	struct osnoise_top_params *params = top->params;
 	struct trace_seq *s = top->trace.seq;
 	char duration[26];
 
 	get_duration(top->start_time, duration, sizeof(duration));
 
 	trace_seq_printf(s, "\033[2;37;40m");
-	trace_seq_printf(s, "                                          Operating System Noise");
 	trace_seq_printf(s, "                                          ");
+
+	if (params->mode == MODE_OSNOISE) {
+		trace_seq_printf(s, "Operating System Noise");
+		trace_seq_printf(s, "                                       ");
+	} else if (params->mode == MODE_HWNOISE) {
+		trace_seq_printf(s, "Hardware-related Noise");
+	}
+
 	trace_seq_printf(s, "                                   ");
 	trace_seq_printf(s, "\033[0;0;0m");
 	trace_seq_printf(s, "\n");
@@ -162,7 +176,14 @@ static void osnoise_top_header(struct osnoise_tool *top)
 	trace_seq_printf(s, "       Noise ");
 	trace_seq_printf(s, " %% CPU Aval ");
 	trace_seq_printf(s, "  Max Noise   Max Single ");
-	trace_seq_printf(s, "         HW          NMI          IRQ      Softirq       Thread");
+	trace_seq_printf(s, "         HW          NMI");
+
+	if (params->mode == MODE_HWNOISE)
+		goto eol;
+
+	trace_seq_printf(s, "          IRQ      Softirq       Thread");
+
+eol:
 	trace_seq_printf(s, "\033[0;0;0m");
 	trace_seq_printf(s, "\n");
 }
@@ -181,6 +202,7 @@ static void clear_terminal(struct trace_seq *seq)
  */
 static void osnoise_top_print(struct osnoise_tool *tool, int cpu)
 {
+	struct osnoise_top_params *params = tool->params;
 	struct trace_seq *s = tool->trace.seq;
 	struct osnoise_top_cpu *cpu_data;
 	struct osnoise_top_data *data;
@@ -205,6 +227,12 @@ static void osnoise_top_print(struct osnoise_tool *tool, int cpu)
 
 	trace_seq_printf(s, "%12llu ", cpu_data->hw_count);
 	trace_seq_printf(s, "%12llu ", cpu_data->nmi_count);
+
+	if (params->mode == MODE_HWNOISE) {
+		trace_seq_printf(s, "\n");
+		return;
+	}
+
 	trace_seq_printf(s, "%12llu ", cpu_data->irq_count);
 	trace_seq_printf(s, "%12llu ", cpu_data->softirq_count);
 	trace_seq_printf(s, "%12llu\n", cpu_data->thread_count);
@@ -241,12 +269,12 @@ osnoise_print_stats(struct osnoise_top_params *params, struct osnoise_tool *top)
 /*
  * osnoise_top_usage - prints osnoise top usage message
  */
-void osnoise_top_usage(char *usage)
+static void osnoise_top_usage(struct osnoise_top_params *params, char *usage)
 {
 	int i;
 
 	static const char * const msg[] = {
-		"  usage: rtla osnoise [top] [-h] [-q] [-D] [-d s] [-a us] [-p us] [-r us] [-s us] [-S us] \\",
+		" [-h] [-q] [-D] [-d s] [-a us] [-p us] [-r us] [-s us] [-S us] \\",
 		"	  [-T us] [-t[=file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] \\",
 		"	  [-c cpu-list] [-P priority]",
 		"",
@@ -277,9 +305,22 @@ void osnoise_top_usage(char *usage)
 	if (usage)
 		fprintf(stderr, "%s\n", usage);
 
-	fprintf(stderr, "rtla osnoise top: a per-cpu summary of the OS noise (version %s)\n",
+	if (params->mode == MODE_OSNOISE) {
+		fprintf(stderr,
+			"rtla osnoise top: a per-cpu summary of the OS noise (version %s)\n",
 			VERSION);
 
+		fprintf(stderr, "  usage: rtla osnoise [top]");
+	}
+
+	if (params->mode == MODE_HWNOISE) {
+		fprintf(stderr,
+			"rtla hwnoise: a summary of hardware-related noise (version %s)\n",
+			VERSION);
+
+		fprintf(stderr, "  usage: rtla hwnoise");
+	}
+
 	for (i = 0; msg[i]; i++)
 		fprintf(stderr, "%s\n", msg[i]);
 	exit(1);
@@ -299,6 +340,9 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 	if (!params)
 		exit(1);
 
+	if (strcmp(argv[0], "hwnoise") == 0)
+		params->mode = MODE_HWNOISE;
+
 	while (1) {
 		static struct option long_options[] = {
 			{"auto",		required_argument,	0, 'a'},
@@ -345,7 +389,7 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 		case 'c':
 			retval = parse_cpu_list(optarg, &params->monitored_cpus);
 			if (retval)
-				osnoise_top_usage("\nInvalid -c cpu list\n");
+				osnoise_top_usage(params, "\nInvalid -c cpu list\n");
 			params->cpus = optarg;
 			break;
 		case 'D':
@@ -354,7 +398,7 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 		case 'd':
 			params->duration = parse_seconds_duration(optarg);
 			if (!params->duration)
-				osnoise_top_usage("Invalid -D duration\n");
+				osnoise_top_usage(params, "Invalid -D duration\n");
 			break;
 		case 'e':
 			tevent = trace_event_alloc(optarg);
@@ -370,17 +414,17 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 			break;
 		case 'h':
 		case '?':
-			osnoise_top_usage(NULL);
+			osnoise_top_usage(params, NULL);
 			break;
 		case 'p':
 			params->period = get_llong_from_str(optarg);
 			if (params->period > 10000000)
-				osnoise_top_usage("Period longer than 10 s\n");
+				osnoise_top_usage(params, "Period longer than 10 s\n");
 			break;
 		case 'P':
 			retval = parse_prio(optarg, &params->sched_param);
 			if (retval == -1)
-				osnoise_top_usage("Invalid -P priority");
+				osnoise_top_usage(params, "Invalid -P priority");
 			params->set_sched = 1;
 			break;
 		case 'q':
@@ -389,7 +433,7 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 		case 'r':
 			params->runtime = get_llong_from_str(optarg);
 			if (params->runtime < 100)
-				osnoise_top_usage("Runtime shorter than 100 us\n");
+				osnoise_top_usage(params, "Runtime shorter than 100 us\n");
 			break;
 		case 's':
 			params->stop_us = get_llong_from_str(optarg);
@@ -415,7 +459,7 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 					exit(EXIT_FAILURE);
 				}
 			} else {
-				osnoise_top_usage("--trigger requires a previous -e\n");
+				osnoise_top_usage(params, "--trigger requires a previous -e\n");
 			}
 			break;
 		case '1': /* filter */
@@ -426,11 +470,11 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv)
 					exit(EXIT_FAILURE);
 				}
 			} else {
-				osnoise_top_usage("--filter requires a previous -e\n");
+				osnoise_top_usage(params, "--filter requires a previous -e\n");
 			}
 			break;
 		default:
-			osnoise_top_usage("Invalid option");
+			osnoise_top_usage(params, "Invalid option");
 		}
 	}
 
@@ -495,6 +539,14 @@ osnoise_top_apply_config(struct osnoise_tool *tool, struct osnoise_top_params *p
 		}
 	}
 
+	if (params->mode == MODE_HWNOISE) {
+		retval = osnoise_set_irq_disable(tool->context, 1);
+		if (retval) {
+			err_msg("Failed to set OSNOISE_IRQ_DISABLE option\n");
+			goto out_err;
+		}
+	}
+
 	return 0;
 
 out_err:

tools/tracing/rtla/src/rtla.c

@@ -26,6 +26,7 @@ static void rtla_usage(int err)
 		"",
 		"  commands:",
 		"     osnoise  - gives information about the operating system noise (osnoise)",
+		"     hwnoise  - gives information about hardware-related noise",
 		"     timerlat - measures the timer irq and thread latency",
 		"",
 		NULL,
@@ -47,6 +48,9 @@ int run_command(int argc, char **argv, int start_position)
 	if (strcmp(argv[start_position], "osnoise") == 0) {
 		osnoise_main(argc-start_position, &argv[start_position]);
 		goto ran;
+	} else if (strcmp(argv[start_position], "hwnoise") == 0) {
+		hwnoise_main(argc-start_position, &argv[start_position]);
+		goto ran;
 	} else if (strcmp(argv[start_position], "timerlat") == 0) {
 		timerlat_main(argc-start_position, &argv[start_position]);
 		goto ran;

tools/tracing/rtla/src/timerlat_aa.h

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Red Hat Inc, Daniel Bristot de Oliveira <bristot@kernel.org>
+ */
+
+int timerlat_aa_init(struct osnoise_tool *tool, int nr_cpus, int dump_task);
+void timerlat_aa_destroy(void);
+
+int timerlat_aa_handler(struct trace_seq *s, struct tep_record *record,
+			struct tep_event *event, void *context);
+
+void timerlat_auto_analysis(int irq_thresh, int thread_thresh);

tools/tracing/rtla/src/timerlat_top.c

@@ -10,10 +10,12 @@
 #include <unistd.h>
 #include <stdio.h>
 #include <time.h>
+#include <errno.h>
 
 #include "utils.h"
 #include "osnoise.h"
 #include "timerlat.h"
+#include "timerlat_aa.h"
 
 struct timerlat_top_params {
 	char			*cpus;
@@ -30,6 +32,8 @@ struct timerlat_top_params {
 	int			quiet;
 	int			set_sched;
 	int			dma_latency;
+	int			no_aa;
+	int			dump_tasks;
 	struct sched_attr	sched_param;
 	struct trace_events	*events;
 };
@@ -130,17 +134,22 @@ timerlat_top_handler(struct trace_seq *s, struct tep_record *record,
 		     struct tep_event *event, void *context)
 {
 	struct trace_instance *trace = context;
+	struct timerlat_top_params *params;
 	unsigned long long latency, thread;
 	struct osnoise_tool *top;
 	int cpu = record->cpu;
 
 	top = container_of(trace, struct osnoise_tool, trace);
+	params = top->params;
 
 	tep_get_field_val(s, event, "context", record, &thread, 1);
 	tep_get_field_val(s, event, "timer_latency", record, &latency, 1);
 
 	timerlat_top_update(top, cpu, thread, latency);
 
+	if (!params->no_aa)
+		timerlat_aa_handler(s, record, event, context);
+
 	return 0;
 }
 
@@ -281,11 +290,13 @@ static void timerlat_top_usage(char *usage)
 		"	  -c/--cpus cpus: run the tracer only on the given cpus",
 		"	  -d/--duration time[m|h|d]: duration of the session in seconds",
 		"	  -D/--debug: print debug info",
+		"	     --dump-tasks: prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)",
 		"	  -t/--trace[=file]: save the stopped trace to [file|timerlat_trace.txt]",
 		"	  -e/--event <sys:event>: enable the <sys:event> in the trace instance, multiple -e are allowed",
 		"	     --filter <command>: enable a trace event filter to the previous -e event",
 		"	     --trigger <command>: enable a trace event trigger to the previous -e event",
 		"	  -n/--nano: display data in nanoseconds",
+		"	     --no-aa: disable auto-analysis, reducing rtla timerlat cpu usage",
 		"	  -q/--quiet print only a summary at the end",
 		"	     --dma-latency us: set /dev/cpu_dma_latency latency <us> to reduce exit from idle latency",
 		"	  -P/--priority o:prio|r:prio|f:prio|d:runtime:period : set scheduling parameters",
@@ -349,13 +360,15 @@ static struct timerlat_top_params
 			{"trigger",		required_argument,	0, '0'},
 			{"filter",		required_argument,	0, '1'},
 			{"dma-latency",		required_argument,	0, '2'},
+			{"no-aa",		no_argument,		0, '3'},
+			{"dump-tasks",		no_argument,		0, '4'},
 			{0, 0, 0, 0}
 		};
 
 		/* getopt_long stores the option index here. */
 		int option_index = 0;
 
-		c = getopt_long(argc, argv, "a:c:d:De:hi:np:P:qs:t::T:0:1:2:",
+		c = getopt_long(argc, argv, "a:c:d:De:hi:np:P:qs:t::T:0:1:2:34",
 				 long_options, &option_index);
 
 		/* detect the end of the options. */
@@ -368,13 +381,13 @@ static struct timerlat_top_params
 
 			/* set thread stop to auto_thresh */
 			params->stop_total_us = auto_thresh;
+			params->stop_us = auto_thresh;
 
 			/* get stack trace */
 			params->print_stack = auto_thresh;
 
 			/* set trace */
 			params->trace_output = "timerlat_trace.txt";
-
 			break;
 		case 'c':
 			retval = parse_cpu_list(optarg, &params->monitored_cpus);
@@ -437,6 +450,7 @@ static struct timerlat_top_params
 				params->trace_output = &optarg[1];
 			else
 				params->trace_output = "timerlat_trace.txt";
+
 			break;
 		case '0': /* trigger */
 			if (params->events) {
@@ -467,6 +481,12 @@ static struct timerlat_top_params
 				exit(EXIT_FAILURE);
 			}
 			break;
+		case '3': /* no-aa */
+			params->no_aa = 1;
+			break;
+		case '4':
+			params->dump_tasks = 1;
+			break;
 		default:
 			timerlat_top_usage("Invalid option");
 		}
@@ -477,6 +497,12 @@ static struct timerlat_top_params
 		exit(EXIT_FAILURE);
 	}
 
+	/*
+	 * Auto analysis only happens if stop tracing, thus:
+	 */
+	if (!params->stop_us && !params->stop_total_us)
+		params->no_aa = 1;
+
 	return params;
 }
 
@@ -547,6 +573,7 @@ static struct osnoise_tool
 {
 	struct osnoise_tool *top;
 	int nr_cpus;
+	int retval;
 
 	nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
 
@@ -563,6 +590,16 @@ static struct osnoise_tool
 	tep_register_event_handler(top->trace.tep, -1, "ftrace", "timerlat",
 				   timerlat_top_handler, top);
 
+	/*
+	 * If no auto analysis, we are ready.
+	 */
+	if (params->no_aa)
+		return top;
+
+	retval = timerlat_aa_init(top, nr_cpus, params->dump_tasks);
+	if (retval)
+		goto out_err;
+
 	return top;
 
 out_err:
@@ -688,6 +725,10 @@ int timerlat_top_main(int argc, char *argv[])
 
 	if (trace_is_off(&top->trace, &record->trace)) {
 		printf("rtla timerlat hit stop tracing\n");
+
+		if (!params->no_aa)
+			timerlat_auto_analysis(params->stop_us, params->stop_total_us);
+
 		if (params->trace_output) {
 			printf("  Saving trace to %s\n", params->trace_output);
 			save_trace_to_file(record->trace.inst, params->trace_output);
@@ -701,6 +742,7 @@ int timerlat_top_main(int argc, char *argv[])
 	params->events = NULL;
 out_free:
 	timerlat_free_top(top->data);
+	timerlat_aa_destroy();
 	osnoise_destroy_tool(record);
 	osnoise_destroy_tool(top);
 	free(params);

tools/tracing/rtla/src/utils.h

@@ -56,3 +56,6 @@ struct sched_attr {
 int parse_prio(char *arg, struct sched_attr *sched_param);
 int set_comm_sched_attr(const char *comm_prefix, struct sched_attr *attr);
 int set_cpu_dma_latency(int32_t latency);
+
+#define ns_to_usf(x) (((double)x/1000))
+#define ns_to_per(total, part) ((part * 100) / (double)total)

tools/verification/rv/src/in_kernel.c

@@ -519,7 +519,7 @@ static void ikm_usage_print_reactors(void)
 
 		start = ++end;
 		end = strstr(start, "\n");
-	};
+	}
 
 	fprintf(stderr, "\n");
 }