mmc: core: Allow setting CMD timeout for CMD6 (SWITCH).

CMD6 is an R1B-type command, where DAT is used as busy. Depending
on register written using CMD6, timeout value can be different
as per spec.
Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/core/mmc.c

@@ -548,7 +548,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if (card->ext_csd.enhanced_area_en) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_ERASE_GROUP_DEF, 1);
+				 EXT_CSD_ERASE_GROUP_DEF, 1, 0);
 
 		if (err && err != -EBADMSG)
 			goto free_card;
@@ -579,7 +579,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	if (card->ext_csd.bootconfig & 0x7) {
 		card->ext_csd.bootconfig &= ~0x7;
 		mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_CONFIG,
-			   card->ext_csd.bootconfig);
+			   card->ext_csd.bootconfig, 0);
 	}
 
 	/*
@@ -588,7 +588,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	if ((card->ext_csd.hs_max_dtr != 0) &&
 		(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_HS_TIMING, 1);
+				 EXT_CSD_HS_TIMING, 1, 0);
 		if (err && err != -EBADMSG)
 			goto free_card;
 
@@ -655,7 +655,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 				ddr = 0; /* no DDR for 1-bit width */
 			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 					 EXT_CSD_BUS_WIDTH,
-					 ext_csd_bits[idx][0]);
+					 ext_csd_bits[idx][0],
+					 0);
 			if (!err) {
 				mmc_set_bus_width_ddr(card->host,
 						      bus_width, MMC_SDR_MODE);
@@ -675,7 +676,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		if (!err && ddr) {
 			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 					 EXT_CSD_BUS_WIDTH,
-					ext_csd_bits[idx][1]);
+					 ext_csd_bits[idx][1],
+					 0);
 		}
 		if (err) {
 			printk(KERN_WARNING "%s: switch to bus width %d ddr %d "

drivers/mmc/core/mmc_ops.c

@@ -387,7 +387,19 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
 	return err;
 }
 
-int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
+/**
+ *	mmc_switch - modify EXT_CSD register
+ *	@card: the MMC card associated with the data transfer
+ *	@set: cmd set values
+ *	@index: EXT_CSD register index
+ *	@value: value to program into EXT_CSD register
+ *	@timeout_ms: timeout (ms) for operation performed by register write,
+ *                   timeout of zero implies maximum possible timeout
+ *
+ *	Modifies the EXT_CSD register for selected card.
+ */
+int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
+	       unsigned int timeout_ms)
 {
 	int err;
 	struct mmc_command cmd;
@@ -404,6 +416,7 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
 		  (value << 8) |
 		  set;
 	cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+	cmd.cmd_timeout_ms = timeout_ms;
 
 	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
 	if (err)
@@ -433,6 +446,7 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mmc_switch);
 
 int mmc_send_status(struct mmc_card *card, u32 *status)
 {

drivers/mmc/core/mmc_ops.h

@@ -20,7 +20,6 @@ int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
 int mmc_set_relative_addr(struct mmc_card *card);
 int mmc_send_csd(struct mmc_card *card, u32 *csd);
 int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
-int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value);
 int mmc_send_status(struct mmc_card *card, u32 *status);
 int mmc_send_cid(struct mmc_host *host, u32 *cid);
 int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);

include/linux/mmc/core.h

@@ -135,6 +135,7 @@ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
 extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
 extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);
+extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
 
 #define MMC_ERASE_ARG		0x00000000
 #define MMC_SECURE_ERASE_ARG	0x80000000