Commit d464c92b authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID updates from Jiri Kosina:
 "It contains HID driver updates all over the place -- a lot of new
  hardware support especially in the multitouch area, including generic
  handling of all multitouch devices by the hid-multitiouch driver
  automatically."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits)
  HID: multitouch: add PID for Fructel product
  HID: wacom: Add reporting of wheel for Intuos4 WL
  HID: wacom: Replace __set_bit with input_set_capability
  HID: tivo: add support for BT-version (0x1200)
  HID: wacom: Reset stylus buttons - Intuos4 WL
  HID: multitouch: detect serial protocol
  HID: handle all multitouch devices through hid-multitouch
  HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T
  HID: make it possible to force hid-core claim the device
  HID: multitouch: add support for eGalax 0x722a
  HID: usbhid: add quirk no_get for quanta 3008 devices
  HID: multitouch: add more eGalax devices
  HID: multitouch: add new PID from Ideacom
  HID: multitouch: add support for Atmel maXTouch 03eb:2118
  HID: waltop: Add support for tablet with PID 0038
  HID: waltop: Replace original rdescs with links
  HID: uclogic: Replace original rdescs with links
  HID: wacom: Add pad buttons reporting on Intuos4 WL
  HID: wacom: report distance for Intuos4 WL
  HID: kye: Add support for 3 tablets
  ...
parents 3b59bf08 4a247a41
...@@ -200,11 +200,14 @@ config HID_KEYTOUCH ...@@ -200,11 +200,14 @@ config HID_KEYTOUCH
- Keytouch IEC 60945 - Keytouch IEC 60945
config HID_KYE config HID_KYE
tristate "Kye/Genius Ergo Mouse" if EXPERT tristate "KYE/Genius devices"
depends on USB_HID depends on USB_HID
default !EXPERT
---help--- ---help---
Support for Kye/Genius Ergo Mouse. Support for KYE/Genius devices not fully compliant with HID standard:
- Ergo Mouse
- EasyPen i405X tablet
- MousePen i608X tablet
- EasyPen M610X tablet
config HID_UCLOGIC config HID_UCLOGIC
tristate "UC-Logic" tristate "UC-Logic"
...@@ -257,7 +260,9 @@ config HID_LOGITECH_DJ ...@@ -257,7 +260,9 @@ config HID_LOGITECH_DJ
---help--- ---help---
Say Y if you want support for Logitech Unifying receivers and devices. Say Y if you want support for Logitech Unifying receivers and devices.
Unifying receivers are capable of pairing up to 6 Logitech compliant Unifying receivers are capable of pairing up to 6 Logitech compliant
devices to the same receiver. devices to the same receiver. Without this driver it will be handled by
generic USB_HID driver and all incomming events will be multiplexed
into a single mouse and a single keyboard device.
config LOGITECH_FF config LOGITECH_FF
bool "Logitech force feedback support" bool "Logitech force feedback support"
...@@ -354,7 +359,9 @@ config HID_MULTITOUCH ...@@ -354,7 +359,9 @@ config HID_MULTITOUCH
- LG Display panels (Dell ST2220Tc) - LG Display panels (Dell ST2220Tc)
- Lumio CrystalTouch panels - Lumio CrystalTouch panels
- MosArt dual-touch panels - MosArt dual-touch panels
- Panasonic multitouch panels
- PenMount dual touch panels - PenMount dual touch panels
- Perixx Peripad 701 touchpad
- PixArt optical touch screen - PixArt optical touch screen
- Pixcir dual touch panels - Pixcir dual touch panels
- Quanta panels - Quanta panels
...@@ -476,59 +483,21 @@ config HID_PRIMAX ...@@ -476,59 +483,21 @@ config HID_PRIMAX
HID standard. HID standard.
config HID_ROCCAT config HID_ROCCAT
tristate "Roccat special event support" tristate "Roccat device support"
depends on USB_HID
select HID_ROCCAT_COMMON
---help---
Support for Roccat special events.
Say Y here if you have a Roccat mouse or keyboard and want OSD or
macro execution support.
config HID_ROCCAT_COMMON
tristate
depends on HID_ROCCAT
config HID_ROCCAT_ARVO
tristate "Roccat Arvo keyboard support"
depends on USB_HID
depends on HID_ROCCAT
---help---
Support for Roccat Arvo keyboard.
config HID_ROCCAT_ISKU
tristate "Roccat Isku keyboard support"
depends on USB_HID
depends on HID_ROCCAT
---help---
Support for Roccat Isku keyboard.
config HID_ROCCAT_KONE
tristate "Roccat Kone Mouse support"
depends on USB_HID depends on USB_HID
depends on HID_ROCCAT
---help--- ---help---
Support for Roccat Kone mouse. Support for Roccat devices.
Say Y here if you have a Roccat mouse or keyboard and want
support for its special functionalities.
config HID_ROCCAT_KONEPLUS config HID_SAITEK
tristate "Roccat Kone[+] mouse support" tristate "Saitek non-fully HID-compliant devices"
depends on USB_HID depends on USB_HID
depends on HID_ROCCAT
---help--- ---help---
Support for Roccat Kone[+] mouse. Support for Saitek devices that are not fully compliant with the
HID standard.
config HID_ROCCAT_KOVAPLUS
tristate "Roccat Kova[+] mouse support"
depends on USB_HID
depends on HID_ROCCAT
---help---
Support for Roccat Kova[+] mouse.
config HID_ROCCAT_PYRA Currently only supports the PS1000 controller.
tristate "Roccat Pyra mouse support"
depends on USB_HID
depends on HID_ROCCAT
---help---
Support for Roccat Pyra mouse.
config HID_SAMSUNG config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards" tristate "Samsung InfraRed remote control or keyboards"
...@@ -594,6 +563,12 @@ config SMARTJOYPLUS_FF ...@@ -594,6 +563,12 @@ config SMARTJOYPLUS_FF
Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
enable force feedback support for it. enable force feedback support for it.
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
depends on (USB_HID || BT_HIDP)
---help---
Say Y if you have a TiVo Slide Bluetooth remote control.
config HID_TOPSEED config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
depends on USB_HID depends on USB_HID
......
...@@ -64,14 +64,10 @@ obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o ...@@ -64,14 +64,10 @@ obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
obj-$(CONFIG_HID_PRIMAX) += hid-primax.o obj-$(CONFIG_HID_PRIMAX) += hid-primax.o
obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \
obj-$(CONFIG_HID_ROCCAT_COMMON) += hid-roccat-common.o hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
obj-$(CONFIG_HID_ROCCAT_ARVO) += hid-roccat-arvo.o hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o
obj-$(CONFIG_HID_ROCCAT_ISKU) += hid-roccat-isku.o obj-$(CONFIG_HID_SAITEK) += hid-saitek.o
obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_ROCCAT_KONEPLUS) += hid-roccat-koneplus.o
obj-$(CONFIG_HID_ROCCAT_KOVAPLUS) += hid-roccat-kovaplus.o
obj-$(CONFIG_HID_ROCCAT_PYRA) += hid-roccat-pyra.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o obj-$(CONFIG_HID_SONY) += hid-sony.o
...@@ -79,6 +75,7 @@ obj-$(CONFIG_HID_SPEEDLINK) += hid-speedlink.o ...@@ -79,6 +75,7 @@ obj-$(CONFIG_HID_SPEEDLINK) += hid-speedlink.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
obj-$(CONFIG_HID_TIVO) += hid-tivo.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
......
...@@ -45,6 +45,12 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -45,6 +45,12 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
case 0xff09: ch_map_key_clear(BTN_9); break; case 0xff09: ch_map_key_clear(BTN_9); break;
case 0xff0a: ch_map_key_clear(BTN_A); break; case 0xff0a: ch_map_key_clear(BTN_A); break;
case 0xff0b: ch_map_key_clear(BTN_B); break; case 0xff0b: ch_map_key_clear(BTN_B); break;
case 0x00f1: ch_map_key_clear(KEY_WLAN); break;
case 0x00f2: ch_map_key_clear(KEY_BRIGHTNESSDOWN); break;
case 0x00f3: ch_map_key_clear(KEY_BRIGHTNESSUP); break;
case 0x00f4: ch_map_key_clear(KEY_DISPLAY_OFF); break;
case 0x00f7: ch_map_key_clear(KEY_CAMERA); break;
case 0x00f8: ch_map_key_clear(KEY_PROG1); break;
default: default:
return 0; return 0;
} }
...@@ -53,6 +59,7 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -53,6 +59,7 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
static const struct hid_device_id ch_devices[] = { static const struct hid_device_id ch_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
{ } { }
}; };
MODULE_DEVICE_TABLE(hid, ch_devices); MODULE_DEVICE_TABLE(hid, ch_devices);
......
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
* Copyright (c) 1999 Andreas Gal * Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2006-2010 Jiri Kosina * Copyright (c) 2006-2012 Jiri Kosina
*/ */
/* /*
...@@ -50,6 +50,10 @@ module_param_named(debug, hid_debug, int, 0600); ...@@ -50,6 +50,10 @@ module_param_named(debug, hid_debug, int, 0600);
MODULE_PARM_DESC(debug, "toggle HID debugging messages"); MODULE_PARM_DESC(debug, "toggle HID debugging messages");
EXPORT_SYMBOL_GPL(hid_debug); EXPORT_SYMBOL_GPL(hid_debug);
static int hid_ignore_special_drivers = 0;
module_param_named(ignore_special_drivers, hid_ignore_special_drivers, int, 0600);
MODULE_PARM_DESC(debug, "Ignore any special drivers and handle all devices by generic driver");
/* /*
* Register a new report for a device. * Register a new report for a device.
*/ */
...@@ -1232,7 +1236,6 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) ...@@ -1232,7 +1236,6 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
hdev->claimed |= HID_CLAIMED_INPUT; hdev->claimed |= HID_CLAIMED_INPUT;
if (hdev->quirks & HID_QUIRK_MULTITOUCH) { if (hdev->quirks & HID_QUIRK_MULTITOUCH) {
/* this device should be handled by hid-multitouch, skip it */ /* this device should be handled by hid-multitouch, skip it */
hdev->quirks &= ~HID_QUIRK_MULTITOUCH;
return -ENODEV; return -ENODEV;
} }
...@@ -1396,6 +1399,7 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1396,6 +1399,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
...@@ -1409,6 +1413,8 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1409,6 +1413,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) },
...@@ -1417,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1417,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) }, { HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL, USB_DEVICE_ID_GAMETEL_MT_MODE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
...@@ -1435,6 +1442,9 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1435,6 +1442,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) }, { HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) }, { HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MULTITOUCH) },
...@@ -1462,8 +1472,10 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1462,8 +1472,10 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFGT_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFGT_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) },
#if IS_ENABLED(CONFIG_HID_LOGITECH_DJ)
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) },
#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
...@@ -1501,6 +1513,8 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1501,6 +1513,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) }, { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) }, { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC, USB_DEVICE_ID_PANABOARD_UBT780) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC, USB_DEVICE_ID_PANABOARD_UBT880) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) }, { HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
...@@ -1516,6 +1530,7 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1516,6 +1530,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
...@@ -1535,6 +1550,8 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1535,6 +1550,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) },
...@@ -1548,6 +1565,7 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1548,6 +1565,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) }, { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) }, { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) },
...@@ -1556,6 +1574,8 @@ static const struct hid_device_id hid_have_special_driver[] = { ...@@ -1556,6 +1574,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_Q_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_PID_0038) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_XAT, USB_DEVICE_ID_XAT_CSR) }, { HID_USB_DEVICE(USB_VENDOR_ID_XAT, USB_DEVICE_ID_XAT_CSR) },
...@@ -1659,11 +1679,15 @@ static int hid_bus_match(struct device *dev, struct device_driver *drv) ...@@ -1659,11 +1679,15 @@ static int hid_bus_match(struct device *dev, struct device_driver *drv)
struct hid_driver *hdrv = container_of(drv, struct hid_driver, driver); struct hid_driver *hdrv = container_of(drv, struct hid_driver, driver);
struct hid_device *hdev = container_of(dev, struct hid_device, dev); struct hid_device *hdev = container_of(dev, struct hid_device, dev);
if ((hdev->quirks & HID_QUIRK_MULTITOUCH) &&
!strncmp(hdrv->name, "hid-multitouch", 14))
return 1;
if (!hid_match_device(hdev, hdrv)) if (!hid_match_device(hdev, hdrv))
return 0; return 0;
/* generic wants all that don't have specialized driver */ /* generic wants all that don't have specialized driver */
if (!strncmp(hdrv->name, "generic-", 8)) if (!strncmp(hdrv->name, "generic-", 8) && !hid_ignore_special_drivers)
return !hid_match_id(hdev, hid_have_special_driver); return !hid_match_id(hdev, hid_have_special_driver);
return 1; return 1;
...@@ -1683,8 +1707,11 @@ static int hid_device_probe(struct device *dev) ...@@ -1683,8 +1707,11 @@ static int hid_device_probe(struct device *dev)
if (!hdev->driver) { if (!hdev->driver) {
id = hid_match_device(hdev, hdrv); id = hid_match_device(hdev, hdrv);
if (id == NULL) { if (id == NULL) {
ret = -ENODEV; if (!((hdev->quirks & HID_QUIRK_MULTITOUCH) &&
goto unlock; !strncmp(hdrv->name, "hid-multitouch", 14))) {
ret = -ENODEV;
goto unlock;
}
} }
hdev->driver = hdrv; hdev->driver = hdrv;
......
...@@ -41,7 +41,7 @@ ...@@ -41,7 +41,7 @@
#define USB_VENDOR_ID_ACTIONSTAR 0x2101 #define USB_VENDOR_ID_ACTIONSTAR 0x2101
#define USB_DEVICE_ID_ACTIONSTAR_1011 0x1011 #define USB_DEVICE_ID_ACTIONSTAR_1011 0x1011
#define USB_VENDOR_ID_ADS_TECH 0x06e1 #define USB_VENDOR_ID_ADS_TECH 0x06e1
#define USB_DEVICE_ID_ADS_TECH_RADIO_SI470X 0xa155 #define USB_DEVICE_ID_ADS_TECH_RADIO_SI470X 0xa155
#define USB_VENDOR_ID_AFATECH 0x15a4 #define USB_VENDOR_ID_AFATECH 0x15a4
...@@ -152,6 +152,7 @@ ...@@ -152,6 +152,7 @@
#define USB_VENDOR_ID_ATMEL 0x03eb #define USB_VENDOR_ID_ATMEL 0x03eb
#define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c
#define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER 0x2118
#define USB_VENDOR_ID_AVERMEDIA 0x07ca #define USB_VENDOR_ID_AVERMEDIA 0x07ca
#define USB_DEVICE_ID_AVER_FM_MR800 0xb800 #define USB_DEVICE_ID_AVER_FM_MR800 0xb800
...@@ -176,6 +177,7 @@ ...@@ -176,6 +177,7 @@
#define USB_VENDOR_ID_CH 0x068e #define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_THROTTLE 0x00f1 #define USB_DEVICE_ID_CH_PRO_THROTTLE 0x00f1
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_DEVICE_ID_CH_FIGHTERSTICK 0x00f3
#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 #define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
#define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE 0x0051 #define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE 0x0051
#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff #define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
...@@ -193,6 +195,7 @@ ...@@ -193,6 +195,7 @@
#define USB_DEVICE_ID_CHICONY_TACTICAL_PAD 0x0418 #define USB_DEVICE_ID_CHICONY_TACTICAL_PAD 0x0418
#define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d
#define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618 #define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618
#define USB_DEVICE_ID_CHICONY_WIRELESS2 0x1123
#define USB_VENDOR_ID_CHUNGHWAT 0x2247 #define USB_VENDOR_ID_CHUNGHWAT 0x2247
#define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001
...@@ -240,11 +243,18 @@ ...@@ -240,11 +243,18 @@
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D 0x480d #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D 0x480d
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E 0x480e #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E 0x480e
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207 0x7207
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C 0x720c #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C 0x720c
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224 0x7224
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_722A 0x722A
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E 0x725e
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262 0x7262
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B 0x726b #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B 0x726b
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA 0x72aa
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1 0x72a1 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1 0x72a1
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA 0x72fa #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA 0x72fa
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302 0x7302 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302 0x7302
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349 0x7349
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001
#define USB_VENDOR_ID_ELECOM 0x056e #define USB_VENDOR_ID_ELECOM 0x056e
...@@ -272,6 +282,9 @@ ...@@ -272,6 +282,9 @@
#define USB_VENDOR_ID_EZKEY 0x0518 #define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002 #define USB_DEVICE_ID_BTC_8193 0x0002
#define USB_VENDOR_ID_FRUCTEL 0x25B6
#define USB_DEVICE_ID_GAMETEL_MT_MODE 0x0002
#define USB_VENDOR_ID_GAMERON 0x0810 #define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
...@@ -377,6 +390,7 @@ ...@@ -377,6 +390,7 @@
#define USB_VENDOR_ID_IDEACOM 0x1cb6 #define USB_VENDOR_ID_IDEACOM 0x1cb6
#define USB_DEVICE_ID_IDEACOM_IDC6650 0x6650 #define USB_DEVICE_ID_IDEACOM_IDC6650 0x6650
#define USB_DEVICE_ID_IDEACOM_IDC6651 0x6651
#define USB_VENDOR_ID_ILITEK 0x222a #define USB_VENDOR_ID_ILITEK 0x222a
#define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001 #define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001
...@@ -408,6 +422,9 @@ ...@@ -408,6 +422,9 @@
#define USB_VENDOR_ID_KYE 0x0458 #define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087 #define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003 #define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010
#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X 0x5011
#define USB_DEVICE_ID_KYE_EASYPEN_M610X 0x5013
#define USB_VENDOR_ID_LABTEC 0x1020 #define USB_VENDOR_ID_LABTEC 0x1020
#define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006
...@@ -568,6 +585,10 @@ ...@@ -568,6 +585,10 @@
#define USB_DEVICE_ID_ORTEK_PKB1700 0x1700 #define USB_DEVICE_ID_ORTEK_PKB1700 0x1700
#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000 #define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
#define USB_VENDOR_ID_PANASONIC 0x04da
#define USB_DEVICE_ID_PANABOARD_UBT780 0x1044
#define USB_DEVICE_ID_PANABOARD_UBT880 0x104d
#define USB_VENDOR_ID_PANJIT 0x134c #define USB_VENDOR_ID_PANJIT 0x134c
#define USB_VENDOR_ID_PANTHERLORD 0x0810 #define USB_VENDOR_ID_PANTHERLORD 0x0810
...@@ -616,6 +637,7 @@ ...@@ -616,6 +637,7 @@
#define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
#define USB_DEVICE_ID_SAITEK_PS1000 0x0621
#define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
...@@ -657,11 +679,16 @@ ...@@ -657,11 +679,16 @@
#define USB_VENDOR_ID_THRUSTMASTER 0x044f #define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TIVO 0x150a
#define USB_DEVICE_ID_TIVO_SLIDE_BT 0x1200
#define USB_DEVICE_ID_TIVO_SLIDE 0x1201
#define USB_VENDOR_ID_TOPSEED 0x0766 #define USB_VENDOR_ID_TOPSEED 0x0766
#define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204 #define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204
#define USB_VENDOR_ID_TOPSEED2 0x1784 #define USB_VENDOR_ID_TOPSEED2 0x1784
#define USB_DEVICE_ID_TOPSEED2_RF_COMBO 0x0004 #define USB_DEVICE_ID_TOPSEED2_RF_COMBO 0x0004
#define USB_DEVICE_ID_TOPSEED2_PERIPAD_701 0x0016
#define USB_VENDOR_ID_TOPMAX 0x0663 #define USB_VENDOR_ID_TOPMAX 0x0663
#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103 #define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
...@@ -706,6 +733,8 @@ ...@@ -706,6 +733,8 @@
#define USB_VENDOR_ID_WALTOP 0x172f #define USB_VENDOR_ID_WALTOP 0x172f
#define USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH 0x0032 #define USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH 0x0032
#define USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH 0x0034 #define USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH 0x0034
#define USB_DEVICE_ID_WALTOP_Q_PAD 0x0037
#define USB_DEVICE_ID_WALTOP_PID_0038 0x0038
#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH 0x0501 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH 0x0501
#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH 0x0500 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH 0x0500
...@@ -714,6 +743,7 @@ ...@@ -714,6 +743,7 @@
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101 #define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
#define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201 #define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201
#define USB_DEVICE_ID_SUPER_JOY_BOX_3 0x8888
#define USB_DEVICE_ID_QUAD_USB_JOYPAD 0x8800 #define USB_DEVICE_ID_QUAD_USB_JOYPAD 0x8800
#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 #define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
......
...@@ -279,7 +279,8 @@ static enum power_supply_property hidinput_battery_props[] = { ...@@ -279,7 +279,8 @@ static enum power_supply_property hidinput_battery_props[] = {
POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_STATUS POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_SCOPE,
}; };
#define HID_BATTERY_QUIRK_PERCENT (1 << 0) /* always reports percent */ #define HID_BATTERY_QUIRK_PERCENT (1 << 0) /* always reports percent */
...@@ -344,6 +345,10 @@ static int hidinput_get_battery_property(struct power_supply *psy, ...@@ -344,6 +345,10 @@ static int hidinput_get_battery_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_STATUS_DISCHARGING; val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break; break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
break;
default: default:
ret = -EINVAL; ret = -EINVAL;
break; break;
...@@ -403,6 +408,8 @@ static bool hidinput_setup_battery(struct hid_device *dev, unsigned report_type, ...@@ -403,6 +408,8 @@ static bool hidinput_setup_battery(struct hid_device *dev, unsigned report_type,
battery->name = NULL; battery->name = NULL;
} }
power_supply_powers(battery, &dev->dev);
out: out:
return true; return true;
} }
......
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
* *
* Copyright (c) 2009 Jiri Kosina * Copyright (c) 2009 Jiri Kosina
* Copyright (c) 2009 Tomas Hanak * Copyright (c) 2009 Tomas Hanak
* Copyright (c) 2012 Nikolai Kondrashov
*/ */
/* /*
...@@ -15,36 +16,399 @@ ...@@ -15,36 +16,399 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/hid.h> #include <linux/hid.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/usb.h>
#include "usbhid/usbhid.h"
#include "hid-ids.h" #include "hid-ids.h"
/* the fixups that need to be done: /*
* - change led usage page to button for extra buttons * See EasyPen i405X description, device and HID report descriptors at
* - report size 8 count 1 must be size 1 count 8 for button bitfield * http://sf.net/apps/mediawiki/digimend/?title=KYE_EasyPen_i405X
* - change the button usage range to 4-7 for the extra buttons
*/ */
/* Original EasyPen i405X report descriptor size */
#define EASYPEN_I405X_RDESC_ORIG_SIZE 476
/* Fixed EasyPen i405X report descriptor */
static __u8 easypen_i405x_rdesc_fixed[] = {
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x01, /* Usage (01h), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x01, /* Usage (01h), */
0x15, 0x80, /* Logical Minimum (-128), */
0x25, 0x7F, /* Logical Maximum (127), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x07, /* Report Count (7), */
0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x03, /* Input (Constant, Variable), */
0x09, 0x32, /* Usage (In Range), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x7C, 0x15, /* Physical Maximum (5500), */
0x26, 0x00, 0x37, /* Logical Maximum (14080), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0xA0, 0x0F, /* Physical Maximum (4000), */
0x26, 0x00, 0x28, /* Logical Maximum (10240), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* See MousePen i608X description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=KYE_MousePen_i608X
*/
/* Original MousePen i608X report descriptor size */
#define MOUSEPEN_I608X_RDESC_ORIG_SIZE 476
/* Fixed MousePen i608X report descriptor */
static __u8 mousepen_i608x_rdesc_fixed[] = {
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x01, /* Usage (01h), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x01, /* Usage (01h), */
0x15, 0x80, /* Logical Minimum (-128), */
0x25, 0x7F, /* Logical Maximum (127), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x07, /* Report Count (7), */
0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x03, /* Input (Constant, Variable), */
0x09, 0x32, /* Usage (In Range), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x40, 0x1F, /* Physical Maximum (8000), */
0x26, 0x00, 0x50, /* Logical Maximum (20480), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x70, 0x17, /* Physical Maximum (6000), */
0x26, 0x00, 0x3C, /* Logical Maximum (15360), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0, /* End Collection, */
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x02, /* Usage (Mouse), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x11, /* Report ID (17), */
0x09, 0x01, /* Usage (Pointer), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0xA4, /* Push, */
0x05, 0x09, /* Usage Page (Button), */
0x75, 0x01, /* Report Size (1), */
0x19, 0x01, /* Usage Minimum (01h), */
0x29, 0x03, /* Usage Maximum (03h), */
0x25, 0x01, /* Logical Maximum (1), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x05, /* Report Count (5), */
0x81, 0x01, /* Input (Constant), */
0xB4, /* Pop, */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x75, 0x10, /* Report Size (16), */
0x09, 0x30, /* Usage (X), */
0x46, 0x40, 0x1F, /* Physical Maximum (8000), */
0x26, 0x00, 0x50, /* Logical Maximum (20480), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x70, 0x17, /* Physical Maximum (6000), */
0x26, 0x00, 0x3C, /* Logical Maximum (15360), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x75, 0x08, /* Report Size (8), */
0x09, 0x38, /* Usage (Wheel), */
0x15, 0xFF, /* Logical Minimum (-1), */
0x25, 0x01, /* Logical Maximum (1), */
0x81, 0x06, /* Input (Variable, Relative), */
0x81, 0x01, /* Input (Constant), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* See EasyPen M610X description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=KYE_EasyPen_M610X
*/
/* Original EasyPen M610X report descriptor size */
#define EASYPEN_M610X_RDESC_ORIG_SIZE 476
/* Fixed EasyPen M610X report descriptor */
static __u8 easypen_m610x_rdesc_fixed[] = {
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x01, /* Usage (01h), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x01, /* Usage (01h), */
0x15, 0x80, /* Logical Minimum (-128), */
0x25, 0x7F, /* Logical Maximum (127), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x07, /* Report Count (7), */
0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x03, /* Input (Constant, Variable), */
0x09, 0x32, /* Usage (In Range), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x10, 0x27, /* Physical Maximum (10000), */
0x27, 0x00, 0xA0, 0x00, 0x00, /* Logical Maximum (40960), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x6A, 0x18, /* Physical Maximum (6250), */
0x26, 0x00, 0x64, /* Logical Maximum (25600), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0, /* End Collection, */
0x05, 0x0C, /* Usage Page (Consumer), */
0x09, 0x01, /* Usage (Consumer Control), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x12, /* Report ID (18), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x04, /* Report Count (4), */
0x0A, 0x1A, 0x02, /* Usage (AC Undo), */
0x0A, 0x79, 0x02, /* Usage (AC Redo Or Repeat), */
0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */
0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x01, /* Report Count (1), */
0x75, 0x14, /* Report Size (20), */
0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x20, /* Report Size (32), */
0x81, 0x03, /* Input (Constant, Variable), */
0xC0 /* End Collection */
};
static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize) unsigned int *rsize)
{ {
if (*rsize >= 74 && switch (hdev->product) {
rdesc[61] == 0x05 && rdesc[62] == 0x08 && case USB_DEVICE_ID_KYE_ERGO_525V:
rdesc[63] == 0x19 && rdesc[64] == 0x08 && /* the fixups that need to be done:
rdesc[65] == 0x29 && rdesc[66] == 0x0f && * - change led usage page to button for extra buttons
rdesc[71] == 0x75 && rdesc[72] == 0x08 && * - report size 8 count 1 must be size 1 count 8 for button
rdesc[73] == 0x95 && rdesc[74] == 0x01) { * bitfield
hid_info(hdev, * - change the button usage range to 4-7 for the extra
"fixing up Kye/Genius Ergo Mouse report descriptor\n"); * buttons
rdesc[62] = 0x09; */
rdesc[64] = 0x04; if (*rsize >= 74 &&
rdesc[66] = 0x07; rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
rdesc[72] = 0x01; rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
rdesc[74] = 0x08; rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
rdesc[73] == 0x95 && rdesc[74] == 0x01) {
hid_info(hdev,
"fixing up Kye/Genius Ergo Mouse "
"report descriptor\n");
rdesc[62] = 0x09;
rdesc[64] = 0x04;
rdesc[66] = 0x07;
rdesc[72] = 0x01;
rdesc[74] = 0x08;
}
break;
case USB_DEVICE_ID_KYE_EASYPEN_I405X:
if (*rsize == EASYPEN_I405X_RDESC_ORIG_SIZE) {
rdesc = easypen_i405x_rdesc_fixed;
*rsize = sizeof(easypen_i405x_rdesc_fixed);
}
break;
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
if (*rsize == MOUSEPEN_I608X_RDESC_ORIG_SIZE) {
rdesc = mousepen_i608x_rdesc_fixed;
*rsize = sizeof(mousepen_i608x_rdesc_fixed);
}
break;
case USB_DEVICE_ID_KYE_EASYPEN_M610X:
if (*rsize == EASYPEN_M610X_RDESC_ORIG_SIZE) {
rdesc = easypen_m610x_rdesc_fixed;
*rsize = sizeof(easypen_m610x_rdesc_fixed);
}
break;
} }
return rdesc; return rdesc;
} }
/**
* Enable fully-functional tablet mode by setting a special feature report.
*
* @hdev: HID device
*
* The specific report ID and data were discovered by sniffing the
* Windows driver traffic.
*/
static int kye_tablet_enable(struct hid_device *hdev)
{
struct list_head *list;
struct list_head *head;
struct hid_report *report;
__s32 *value;
list = &hdev->report_enum[HID_FEATURE_REPORT].report_list;
list_for_each(head, list) {
report = list_entry(head, struct hid_report, list);
if (report->id == 5)
break;
}
if (head == list) {
hid_err(hdev, "tablet-enabling feature report not found\n");
return -ENODEV;
}
if (report->maxfield < 1 || report->field[0]->report_count < 7) {
hid_err(hdev, "invalid tablet-enabling feature report\n");
return -ENODEV;
}
value = report->field[0]->value;
value[0] = 0x12;
value[1] = 0x10;
value[2] = 0x11;
value[3] = 0x12;
value[4] = 0x00;
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
return 0;
}
static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err;
}
switch (id->product) {
case USB_DEVICE_ID_KYE_EASYPEN_I405X:
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
case USB_DEVICE_ID_KYE_EASYPEN_M610X:
ret = kye_tablet_enable(hdev);
if (ret) {
hid_err(hdev, "tablet enabling failed\n");
goto enabling_err;
}
break;
}
return 0;
enabling_err:
hid_hw_stop(hdev);
err:
return ret;
}
static const struct hid_device_id kye_devices[] = { static const struct hid_device_id kye_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ } { }
}; };
MODULE_DEVICE_TABLE(hid, kye_devices); MODULE_DEVICE_TABLE(hid, kye_devices);
...@@ -52,6 +416,7 @@ MODULE_DEVICE_TABLE(hid, kye_devices); ...@@ -52,6 +416,7 @@ MODULE_DEVICE_TABLE(hid, kye_devices);
static struct hid_driver kye_driver = { static struct hid_driver kye_driver = {
.name = "kye", .name = "kye",
.id_table = kye_devices, .id_table = kye_devices,
.probe = kye_probe,
.report_fixup = kye_report_fixup, .report_fixup = kye_report_fixup,
}; };
......
...@@ -445,7 +445,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, ...@@ -445,7 +445,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
dj_report.report_id = REPORT_ID_DJ_SHORT; dj_report.report_id = REPORT_ID_DJ_SHORT;
dj_report.device_index = 0xFF; dj_report.device_index = 0xFF;
dj_report.report_type = REPORT_TYPE_CMD_SWITCH; dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x1F; dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
return logi_dj_recv_send_report(djrcv_dev, &dj_report); return logi_dj_recv_send_report(djrcv_dev, &dj_report);
} }
......
...@@ -418,6 +418,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h ...@@ -418,6 +418,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
__set_bit(BTN_TOOL_TRIPLETAP, input->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
__set_bit(BTN_TOOL_QUADTAP, input->keybit); __set_bit(BTN_TOOL_QUADTAP, input->keybit);
__set_bit(BTN_TOUCH, input->keybit); __set_bit(BTN_TOUCH, input->keybit);
__set_bit(INPUT_PROP_POINTER, input->propbit);
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
} }
if (report_touches) { if (report_touches) {
......
/* /*
* HID driver for multitouch panels * HID driver for multitouch panels
* *
* Copyright (c) 2010-2011 Stephane Chatty <chatty@enac.fr> * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
* Copyright (c) 2010-2011 Benjamin Tissoires <benjamin.tissoires@gmail.com> * Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
* Copyright (c) 2010-2011 Ecole Nationale de l'Aviation Civile, France * Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France
* *
* This code is partly based on hid-egalax.c: * This code is partly based on hid-egalax.c:
* *
...@@ -67,6 +67,7 @@ struct mt_class { ...@@ -67,6 +67,7 @@ struct mt_class {
__s32 sn_height; /* Signal/noise ratio for height events */ __s32 sn_height; /* Signal/noise ratio for height events */
__s32 sn_pressure; /* Signal/noise ratio for pressure events */ __s32 sn_pressure; /* Signal/noise ratio for pressure events */
__u8 maxcontacts; __u8 maxcontacts;
bool is_indirect; /* true for touchpads */
}; };
struct mt_device { struct mt_device {
...@@ -74,11 +75,15 @@ struct mt_device { ...@@ -74,11 +75,15 @@ struct mt_device {
struct mt_class mtclass; /* our mt device class */ struct mt_class mtclass; /* our mt device class */
unsigned last_field_index; /* last field index of the report */ unsigned last_field_index; /* last field index of the report */
unsigned last_slot_field; /* the last field of a slot */ unsigned last_slot_field; /* the last field of a slot */
int last_mt_collection; /* last known mt-related collection */
__s8 inputmode; /* InputMode HID feature, -1 if non-existent */ __s8 inputmode; /* InputMode HID feature, -1 if non-existent */
__s8 maxcontact_report_id; /* Maximum Contact Number HID feature,
-1 if non-existent */
__u8 num_received; /* how many contacts we received */ __u8 num_received; /* how many contacts we received */
__u8 num_expected; /* expected last contact index */ __u8 num_expected; /* expected last contact index */
__u8 maxcontacts; __u8 maxcontacts;
__u8 touches_by_report; /* how many touches are present in one report:
* 1 means we should use a serial protocol
* > 1 means hybrid (multitouch) protocol */
bool curvalid; /* is the current contact valid? */ bool curvalid; /* is the current contact valid? */
struct mt_slot *slots; struct mt_slot *slots;
}; };
...@@ -100,6 +105,8 @@ struct mt_device { ...@@ -100,6 +105,8 @@ struct mt_device {
#define MT_CLS_CYPRESS 0x0102 #define MT_CLS_CYPRESS 0x0102
#define MT_CLS_EGALAX 0x0103 #define MT_CLS_EGALAX 0x0103
#define MT_CLS_EGALAX_SERIAL 0x0104 #define MT_CLS_EGALAX_SERIAL 0x0104
#define MT_CLS_TOPSEED 0x0105
#define MT_CLS_PANASONIC 0x0106
#define MT_DEFAULT_MAXCONTACT 10 #define MT_DEFAULT_MAXCONTACT 10
...@@ -189,6 +196,14 @@ static struct mt_class mt_classes[] = { ...@@ -189,6 +196,14 @@ static struct mt_class mt_classes[] = {
.sn_move = 4096, .sn_move = 4096,
.sn_pressure = 32, .sn_pressure = 32,
}, },
{ .name = MT_CLS_TOPSEED,
.quirks = MT_QUIRK_ALWAYS_VALID,
.is_indirect = true,
.maxcontacts = 2,
},
{ .name = MT_CLS_PANASONIC,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP,
.maxcontacts = 4 },
{ } { }
}; };
...@@ -241,6 +256,7 @@ static void mt_feature_mapping(struct hid_device *hdev, ...@@ -241,6 +256,7 @@ static void mt_feature_mapping(struct hid_device *hdev,
td->inputmode = field->report->id; td->inputmode = field->report->id;
break; break;
case HID_DG_CONTACTMAX: case HID_DG_CONTACTMAX:
td->maxcontact_report_id = field->report->id;
td->maxcontacts = field->value[0]; td->maxcontacts = field->value[0];
if (td->mtclass.maxcontacts) if (td->mtclass.maxcontacts)
/* check if the maxcontacts is given by the class */ /* check if the maxcontacts is given by the class */
...@@ -259,23 +275,44 @@ static void set_abs(struct input_dev *input, unsigned int code, ...@@ -259,23 +275,44 @@ static void set_abs(struct input_dev *input, unsigned int code,
input_set_abs_params(input, code, fmin, fmax, fuzz, 0); input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
} }
static void set_last_slot_field(struct hid_usage *usage, struct mt_device *td,
struct hid_input *hi)
{
if (!test_bit(usage->hid, hi->input->absbit))
td->last_slot_field = usage->hid;
}
static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage, struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max) unsigned long **bit, int *max)
{ {
struct mt_device *td = hid_get_drvdata(hdev); struct mt_device *td = hid_get_drvdata(hdev);
struct mt_class *cls = &td->mtclass; struct mt_class *cls = &td->mtclass;
int code;
/* Only map fields from TouchScreen or TouchPad collections. /* Only map fields from TouchScreen or TouchPad collections.
* We need to ignore fields that belong to other collections * We need to ignore fields that belong to other collections
* such as Mouse that might have the same GenericDesktop usages. */ * such as Mouse that might have the same GenericDesktop usages. */
if (field->application == HID_DG_TOUCHSCREEN) if (field->application == HID_DG_TOUCHSCREEN)
set_bit(INPUT_PROP_DIRECT, hi->input->propbit); set_bit(INPUT_PROP_DIRECT, hi->input->propbit);
else if (field->application == HID_DG_TOUCHPAD) else if (field->application != HID_DG_TOUCHPAD)
set_bit(INPUT_PROP_POINTER, hi->input->propbit);
else
return 0; return 0;
/* In case of an indirect device (touchpad), we need to add
* specific BTN_TOOL_* to be handled by the synaptics xorg
* driver.
* We also consider that touchscreens providing buttons are touchpads.
*/
if (field->application == HID_DG_TOUCHPAD ||
(usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON ||
cls->is_indirect) {
set_bit(INPUT_PROP_POINTER, hi->input->propbit);
set_bit(BTN_TOOL_FINGER, hi->input->keybit);
set_bit(BTN_TOOL_DOUBLETAP, hi->input->keybit);
set_bit(BTN_TOOL_TRIPLETAP, hi->input->keybit);
set_bit(BTN_TOOL_QUADTAP, hi->input->keybit);
}
/* eGalax devices provide a Digitizer.Stylus input which overrides /* eGalax devices provide a Digitizer.Stylus input which overrides
* the correct Digitizers.Finger X/Y ranges. * the correct Digitizers.Finger X/Y ranges.
* Let's just ignore this input. */ * Let's just ignore this input. */
...@@ -293,10 +330,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -293,10 +330,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
cls->sn_move); cls->sn_move);
/* touchscreen emulation */ /* touchscreen emulation */
set_abs(hi->input, ABS_X, field, cls->sn_move); set_abs(hi->input, ABS_X, field, cls->sn_move);
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_GD_Y: case HID_GD_Y:
hid_map_usage(hi, usage, bit, max, hid_map_usage(hi, usage, bit, max,
...@@ -305,10 +340,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -305,10 +340,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
cls->sn_move); cls->sn_move);
/* touchscreen emulation */ /* touchscreen emulation */
set_abs(hi->input, ABS_Y, field, cls->sn_move); set_abs(hi->input, ABS_Y, field, cls->sn_move);
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
} }
return 0; return 0;
...@@ -316,24 +349,18 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -316,24 +349,18 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
case HID_UP_DIGITIZER: case HID_UP_DIGITIZER:
switch (usage->hid) { switch (usage->hid) {
case HID_DG_INRANGE: case HID_DG_INRANGE:
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_DG_CONFIDENCE: case HID_DG_CONFIDENCE:
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_DG_TIPSWITCH: case HID_DG_TIPSWITCH:
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
input_set_capability(hi->input, EV_KEY, BTN_TOUCH); input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_DG_CONTACTID: case HID_DG_CONTACTID:
if (!td->maxcontacts) if (!td->maxcontacts)
...@@ -341,17 +368,15 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -341,17 +368,15 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
input_mt_init_slots(hi->input, td->maxcontacts); input_mt_init_slots(hi->input, td->maxcontacts);
td->last_slot_field = usage->hid; td->last_slot_field = usage->hid;
td->last_field_index = field->index; td->last_field_index = field->index;
td->last_mt_collection = usage->collection_index; td->touches_by_report++;
return 1; return 1;
case HID_DG_WIDTH: case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max, hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR); EV_ABS, ABS_MT_TOUCH_MAJOR);
set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field,
cls->sn_width); cls->sn_width);
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_DG_HEIGHT: case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max, hid_map_usage(hi, usage, bit, max,
...@@ -360,10 +385,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -360,10 +385,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
cls->sn_height); cls->sn_height);
input_set_abs_params(hi->input, input_set_abs_params(hi->input,
ABS_MT_ORIENTATION, 0, 1, 0, 0); ABS_MT_ORIENTATION, 0, 1, 0, 0);
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_DG_TIPPRESSURE: case HID_DG_TIPPRESSURE:
hid_map_usage(hi, usage, bit, max, hid_map_usage(hi, usage, bit, max,
...@@ -373,25 +396,31 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -373,25 +396,31 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
/* touchscreen emulation */ /* touchscreen emulation */
set_abs(hi->input, ABS_PRESSURE, field, set_abs(hi->input, ABS_PRESSURE, field,
cls->sn_pressure); cls->sn_pressure);
if (td->last_mt_collection == usage->collection_index) { set_last_slot_field(usage, td, hi);
td->last_slot_field = usage->hid; td->last_field_index = field->index;
td->last_field_index = field->index;
}
return 1; return 1;
case HID_DG_CONTACTCOUNT: case HID_DG_CONTACTCOUNT:
if (td->last_mt_collection == usage->collection_index) td->last_field_index = field->index;
td->last_field_index = field->index;
return 1; return 1;
case HID_DG_CONTACTMAX: case HID_DG_CONTACTMAX:
/* we don't set td->last_slot_field as contactcount and /* we don't set td->last_slot_field as contactcount and
* contact max are global to the report */ * contact max are global to the report */
if (td->last_mt_collection == usage->collection_index) td->last_field_index = field->index;
td->last_field_index = field->index;
return -1; return -1;
} }
case HID_DG_TOUCH:
/* Legacy devices use TIPSWITCH and not TOUCH.
* Let's just ignore this field. */
return -1;
/* let hid-input decide for the others */ /* let hid-input decide for the others */
return 0; return 0;
case HID_UP_BUTTON:
code = BTN_MOUSE + ((usage->hid - 1) & HID_USAGE);
hid_map_usage(hi, usage, bit, max, EV_KEY, code);
input_set_capability(hi->input, EV_KEY, code);
return 1;
case 0xff000000: case 0xff000000:
/* we do not want to map these: no input-oriented meaning */ /* we do not want to map these: no input-oriented meaning */
return -1; return -1;
...@@ -538,15 +567,17 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, ...@@ -538,15 +567,17 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
if (value) if (value)
td->num_expected = value; td->num_expected = value;
break; break;
case HID_DG_TOUCH:
/* do nothing */
break;
default: default:
/* fallback to the generic hidinput handling */ /* fallback to the generic hidinput handling */
return 0; return 0;
} }
if (usage->hid == td->last_slot_field) { if (usage->hid == td->last_slot_field)
mt_complete_slot(td); mt_complete_slot(td);
}
if (field->index == td->last_field_index if (field->index == td->last_field_index
&& td->num_received >= td->num_expected) && td->num_received >= td->num_expected)
...@@ -578,16 +609,44 @@ static void mt_set_input_mode(struct hid_device *hdev) ...@@ -578,16 +609,44 @@ static void mt_set_input_mode(struct hid_device *hdev)
} }
} }
static void mt_set_maxcontacts(struct hid_device *hdev)
{
struct mt_device *td = hid_get_drvdata(hdev);
struct hid_report *r;
struct hid_report_enum *re;
int fieldmax, max;
if (td->maxcontact_report_id < 0)
return;
if (!td->mtclass.maxcontacts)
return;
re = &hdev->report_enum[HID_FEATURE_REPORT];
r = re->report_id_hash[td->maxcontact_report_id];
if (r) {
max = td->mtclass.maxcontacts;
fieldmax = r->field[0]->logical_maximum;
max = min(fieldmax, max);
if (r->field[0]->value[0] != max) {
r->field[0]->value[0] = max;
usbhid_submit_report(hdev, r, USB_DIR_OUT);
}
}
}
static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
{ {
int ret, i; int ret, i;
struct mt_device *td; struct mt_device *td;
struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */ struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */
for (i = 0; mt_classes[i].name ; i++) { if (id) {
if (id->driver_data == mt_classes[i].name) { for (i = 0; mt_classes[i].name ; i++) {
mtclass = &(mt_classes[i]); if (id->driver_data == mt_classes[i].name) {
break; mtclass = &(mt_classes[i]);
break;
}
} }
} }
...@@ -595,6 +654,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) ...@@ -595,6 +654,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
* that emit events over several HID messages. * that emit events over several HID messages.
*/ */
hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
hdev->quirks &= ~HID_QUIRK_MULTITOUCH;
td = kzalloc(sizeof(struct mt_device), GFP_KERNEL); td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
if (!td) { if (!td) {
...@@ -603,7 +663,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) ...@@ -603,7 +663,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
} }
td->mtclass = *mtclass; td->mtclass = *mtclass;
td->inputmode = -1; td->inputmode = -1;
td->last_mt_collection = -1; td->maxcontact_report_id = -1;
hid_set_drvdata(hdev, td); hid_set_drvdata(hdev, td);
ret = hid_parse(hdev); ret = hid_parse(hdev);
...@@ -614,6 +674,15 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) ...@@ -614,6 +674,15 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (ret) if (ret)
goto fail; goto fail;
if (!id && td->touches_by_report == 1) {
/* the device has been sent by hid-generic */
mtclass = &td->mtclass;
mtclass->quirks |= MT_QUIRK_ALWAYS_VALID;
mtclass->quirks &= ~MT_QUIRK_NOT_SEEN_MEANS_UP;
mtclass->quirks &= ~MT_QUIRK_VALID_IS_INRANGE;
mtclass->quirks &= ~MT_QUIRK_VALID_IS_CONFIDENCE;
}
td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
GFP_KERNEL); GFP_KERNEL);
if (!td->slots) { if (!td->slots) {
...@@ -625,6 +694,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) ...@@ -625,6 +694,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group); ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group);
mt_set_maxcontacts(hdev);
mt_set_input_mode(hdev); mt_set_input_mode(hdev);
return 0; return 0;
...@@ -637,6 +707,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) ...@@ -637,6 +707,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
#ifdef CONFIG_PM #ifdef CONFIG_PM
static int mt_reset_resume(struct hid_device *hdev) static int mt_reset_resume(struct hid_device *hdev)
{ {
mt_set_maxcontacts(hdev);
mt_set_input_mode(hdev); mt_set_input_mode(hdev);
return 0; return 0;
} }
...@@ -674,6 +745,9 @@ static const struct hid_device_id mt_devices[] = { ...@@ -674,6 +745,9 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_SERIAL, { .driver_data = MT_CLS_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_ATMEL, HID_USB_DEVICE(USB_VENDOR_ID_ATMEL,
USB_DEVICE_ID_ATMEL_MULTITOUCH) }, USB_DEVICE_ID_ATMEL_MULTITOUCH) },
{ .driver_data = MT_CLS_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_ATMEL,
USB_DEVICE_ID_ATMEL_MXT_DIGITIZER) },
/* Cando panels */ /* Cando panels */
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
...@@ -716,18 +790,39 @@ static const struct hid_device_id mt_devices[] = { ...@@ -716,18 +790,39 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_EGALAX, { .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV, HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) }, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_722A) },
{ .driver_data = MT_CLS_EGALAX, { .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV, HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) }, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262) },
{ .driver_data = MT_CLS_EGALAX, { .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV, HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) }, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA) },
{ .driver_data = MT_CLS_EGALAX, { .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV, HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA) }, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA) },
{ .driver_data = MT_CLS_EGALAX, { .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV, HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) }, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349) },
{ .driver_data = MT_CLS_EGALAX_SERIAL, { .driver_data = MT_CLS_EGALAX_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV, HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) }, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
...@@ -742,6 +837,11 @@ static const struct hid_device_id mt_devices[] = { ...@@ -742,6 +837,11 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
/* Gametel game controller */
{ .driver_data = MT_CLS_DEFAULT,
HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL,
USB_DEVICE_ID_GAMETEL_MT_MODE) },
/* GoodTouch panels */ /* GoodTouch panels */
{ .driver_data = MT_CLS_DEFAULT, { .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH, HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
...@@ -756,6 +856,9 @@ static const struct hid_device_id mt_devices[] = { ...@@ -756,6 +856,9 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_SERIAL, { .driver_data = MT_CLS_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
USB_DEVICE_ID_IDEACOM_IDC6650) }, USB_DEVICE_ID_IDEACOM_IDC6650) },
{ .driver_data = MT_CLS_SERIAL,
HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
USB_DEVICE_ID_IDEACOM_IDC6651) },
/* Ilitek dual touch panel */ /* Ilitek dual touch panel */
{ .driver_data = MT_CLS_DEFAULT, { .driver_data = MT_CLS_DEFAULT,
...@@ -791,6 +894,14 @@ static const struct hid_device_id mt_devices[] = { ...@@ -791,6 +894,14 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, HID_USB_DEVICE(USB_VENDOR_ID_TURBOX,
USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) }, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
/* Panasonic panels */
{ .driver_data = MT_CLS_PANASONIC,
HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
USB_DEVICE_ID_PANABOARD_UBT780) },
{ .driver_data = MT_CLS_PANASONIC,
HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
USB_DEVICE_ID_PANABOARD_UBT880) },
/* PenMount panels */ /* PenMount panels */
{ .driver_data = MT_CLS_CONFIDENCE, { .driver_data = MT_CLS_CONFIDENCE,
HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
...@@ -837,6 +948,11 @@ static const struct hid_device_id mt_devices[] = { ...@@ -837,6 +948,11 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
USB_DEVICE_ID_MTP_SITRONIX)}, USB_DEVICE_ID_MTP_SITRONIX)},
/* TopSeed panels */
{ .driver_data = MT_CLS_TOPSEED,
HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2,
USB_DEVICE_ID_TOPSEED2_PERIPAD_701) },
/* Touch International panels */ /* Touch International panels */
{ .driver_data = MT_CLS_DEFAULT, { .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL,
......
/*
* HID driver for Saitek devices, currently only the PS1000 (USB gamepad).
* Fixes the HID report descriptor by removing a non-existent axis and
* clearing the constant bit on the input reports for buttons and d-pad.
* (This module is based on "hid-ortek".)
*
* Copyright (c) 2012 Andreas Hübner
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include "hid-ids.h"
static __u8 *saitek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
if (*rsize == 137 && rdesc[20] == 0x09 && rdesc[21] == 0x33
&& rdesc[94] == 0x81 && rdesc[95] == 0x03
&& rdesc[110] == 0x81 && rdesc[111] == 0x03) {
hid_info(hdev, "Fixing up Saitek PS1000 report descriptor\n");
/* convert spurious axis to a "noop" Logical Minimum (0) */
rdesc[20] = 0x15;
rdesc[21] = 0x00;
/* clear constant bit on buttons and d-pad */
rdesc[95] = 0x02;
rdesc[111] = 0x02;
}
return rdesc;
}
static const struct hid_device_id saitek_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000)},
{ }
};
MODULE_DEVICE_TABLE(hid, saitek_devices);
static struct hid_driver saitek_driver = {
.name = "saitek",
.id_table = saitek_devices,
.report_fixup = saitek_report_fixup
};
static int __init saitek_init(void)
{
return hid_register_driver(&saitek_driver);
}
static void __exit saitek_exit(void)
{
hid_unregister_driver(&saitek_driver);
}
module_init(saitek_init);
module_exit(saitek_exit);
MODULE_LICENSE("GPL");
...@@ -155,7 +155,8 @@ static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id) ...@@ -155,7 +155,8 @@ static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id)
} }
static const struct hid_device_id sjoy_devices[] = { static const struct hid_device_id sjoy_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO),
.driver_data = HID_QUIRK_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO), { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO),
.driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET | .driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET |
HID_QUIRK_SKIP_OUTPUT_REPORTS }, HID_QUIRK_SKIP_OUTPUT_REPORTS },
...@@ -163,8 +164,9 @@ static const struct hid_device_id sjoy_devices[] = { ...@@ -163,8 +164,9 @@ static const struct hid_device_id sjoy_devices[] = {
.driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET | .driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET |
HID_QUIRK_SKIP_OUTPUT_REPORTS }, HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD), { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD),
.driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET | .driver_data = HID_QUIRK_MULTI_INPUT |
HID_QUIRK_SKIP_OUTPUT_REPORTS }, HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ } { }
}; };
......
/*
* HID driver for TiVo Slide Bluetooth remote
*
* Copyright (c) 2011 Jarod Wilson <jarod@redhat.com>
* based on the hid-topseed driver, which is in turn, based on hid-cherry...
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#define HID_UP_TIVOVENDOR 0xffff0000
#define tivo_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \
EV_KEY, (c))
static int tivo_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_TIVOVENDOR:
switch (usage->hid & HID_USAGE) {
/* TiVo button */
case 0x3d: tivo_map_key_clear(KEY_MEDIA); break;
/* Live TV */
case 0x3e: tivo_map_key_clear(KEY_TV); break;
/* Red thumbs down */
case 0x41: tivo_map_key_clear(KEY_KPMINUS); break;
/* Green thumbs up */
case 0x42: tivo_map_key_clear(KEY_KPPLUS); break;
default:
return 0;
}
break;
case HID_UP_CONSUMER:
switch (usage->hid & HID_USAGE) {
/* Enter/Last (default mapping: KEY_LAST) */
case 0x083: tivo_map_key_clear(KEY_ENTER); break;
/* Info (default mapping: KEY_PROPS) */
case 0x209: tivo_map_key_clear(KEY_INFO); break;
default:
return 0;
}
break;
default:
return 0;
}
/* This means we found a matching mapping here, else, look in the
* standard hid mappings in hid-input.c */
return 1;
}
static const struct hid_device_id tivo_devices[] = {
/* TiVo Slide Bluetooth remote, pairs with a Broadcom dongle */
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
{ }
};
MODULE_DEVICE_TABLE(hid, tivo_devices);
static struct hid_driver tivo_driver = {
.name = "tivo_slide",
.id_table = tivo_devices,
.input_mapping = tivo_input_mapping,
};
static int __init tivo_init(void)
{
return hid_register_driver(&tivo_driver);
}
static void __exit tivo_exit(void)
{
hid_unregister_driver(&tivo_driver);
}
module_init(tivo_init);
module_exit(tivo_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
...@@ -18,141 +18,16 @@ ...@@ -18,141 +18,16 @@
#include "hid-ids.h" #include "hid-ids.h"
/* /*
* The original descriptors of WPXXXXU tablets have three report IDs, of * See WPXXXXU model descriptions, device and HID report descriptors at
* which only two are used (8 and 9), and the remaining (7) seems to have * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP4030U
* the originally intended pen description which was abandoned for some * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP5540U
* reason. From this unused description it is possible to extract the * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP8060U
* actual physical extents and resolution. All the models use the same
* descriptor with different extents for the unused report ID.
*
* Here it is:
*
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (7),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Physical Minimum (0),
* Physical Maximum (Xpm),
* Logical Maximum (Xlm),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (Ypm),
* Logical Maximum (Ylm),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Input (Variable),
* Report Size (16),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (8),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Usage (00h),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (4),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (9),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (32767),
* Physical Minimum (0),
* Physical Maximum (32767),
* Report Count (2),
* Report Size (16),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Report Count (1),
* Report Size (16),
* Input (Variable),
* End Collection,
* End Collection
*
* Here are the extents values for the WPXXXXU models:
*
* Xpm Xlm Ypm Ylm
* WP4030U 4000 8000 3000 6000
* WP5540U 5500 11000 4000 8000
* WP8060U 8000 16000 6000 12000
*
* This suggests that all of them have 2000 LPI resolution, as advertised.
*/ */
/* Size of the original descriptor of WPXXXXU tablets */ /* Size of the original descriptor of WPXXXXU tablets */
#define WPXXXXU_RDESC_ORIG_SIZE 212 #define WPXXXXU_RDESC_ORIG_SIZE 212
/* /* Fixed WP4030U report descriptor */
* Fixed WP4030U report descriptor.
* Although the hardware might actually support it, the mouse description
* has been removed, since there seems to be no devices having one and it
* wouldn't make much sense because of the working area size.
*/
static __u8 wp4030u_rdesc_fixed[] = { static __u8 wp4030u_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
...@@ -343,148 +218,14 @@ static __u8 wp8060u_rdesc_fixed[] = { ...@@ -343,148 +218,14 @@ static __u8 wp8060u_rdesc_fixed[] = {
}; };
/* /*
* Original WP1062 report descriptor. * See WP1062 description, device and HID report descriptors at
* * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP1062
* Only report ID 9 is actually used.
*
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (7),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch),
* Physical Minimum (0),
* Physical Maximum (10000),
* Logical Maximum (20000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (6583),
* Logical Maximum (13166),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Input (Variable),
* Report Size (16),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (8),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Usage (00h),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (4),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (9),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (4),
* Input (Constant),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch),
* Physical Minimum (0),
* Physical Maximum (10000),
* Logical Maximum (20000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (6583),
* Logical Maximum (13166),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Report Count (1),
* Report Size (16),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (00h),
* Collection (Application),
* Report ID (4),
* Logical Minimum (0),
* Logical Maximum (255),
* Usage (00h),
* Report Size (8),
* Report Count (3),
* Feature (Variable),
* End Collection
*/ */
/* Size of the original descriptor of WP1062 tablet */ /* Size of the original descriptor of WP1062 tablet */
#define WP1062_RDESC_ORIG_SIZE 254 #define WP1062_RDESC_ORIG_SIZE 254
/* /* Fixed WP1062 report descriptor */
* Fixed WP1062 report descriptor.
*
* Removed unused reports, corrected second barrel button usage code, physical
* units.
*/
static __u8 wp1062_rdesc_fixed[] = { static __u8 wp1062_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
...@@ -530,146 +271,14 @@ static __u8 wp1062_rdesc_fixed[] = { ...@@ -530,146 +271,14 @@ static __u8 wp1062_rdesc_fixed[] = {
}; };
/* /*
* Original PF1209 report descriptor. * See PF1209 description, device and HID report descriptors at
* * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_PF1209
* The descriptor is similar to WPXXXXU descriptors, with an addition of a
* feature report (ID 4) of unknown purpose.
*
* Although the advertised resolution is 4000 LPI the unused report ID
* (taken from WPXXXXU, it seems) states 2000 LPI, but it is probably
* incorrect and is a result of blind copying without understanding. Anyway
* the real logical extents are always scaled to 0..32767, which IMHO spoils
* the precision.
*
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (7),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Physical Minimum (0),
* Physical Maximum (12000),
* Logical Maximum (24000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (9000),
* Logical Maximum (18000),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Input (Variable),
* Report Size (16),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (8),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Usage (00h),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (4),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (9),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (32767),
* Physical Minimum (0),
* Physical Maximum (32767),
* Report Count (2),
* Report Size (16),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Report Count (1),
* Report Size (16),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (00h),
* Collection (Application),
* Report ID (4),
* Logical Minimum (0),
* Logical Maximum (255),
* Usage (00h),
* Report Size (8),
* Report Count (3),
* Feature (Variable),
* End Collection
*/ */
/* Size of the original descriptor of PF1209 tablet */ /* Size of the original descriptor of PF1209 tablet */
#define PF1209_RDESC_ORIG_SIZE 234 #define PF1209_RDESC_ORIG_SIZE 234
/* /* Fixed PF1209 report descriptor */
* Fixed PF1209 report descriptor
*
* The descriptor is fixed similarly to WP5540U and WP8060U, plus the
* feature report is removed, because its purpose is unknown and it is of no
* use to the generic HID driver anyway for now.
*/
static __u8 pf1209_rdesc_fixed[] = { static __u8 pf1209_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
......
...@@ -31,10 +31,15 @@ ...@@ -31,10 +31,15 @@
#include "hid-ids.h" #include "hid-ids.h"
#define PAD_DEVICE_ID 0x0F
struct wacom_data { struct wacom_data {
__u16 tool; __u16 tool;
unsigned char butstate; __u16 butstate;
__u8 whlstate;
__u8 features; __u8 features;
__u32 id;
__u32 serial;
unsigned char high_speed; unsigned char high_speed;
#ifdef CONFIG_HID_WACOM_POWER_SUPPLY #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
int battery_capacity; int battery_capacity;
...@@ -314,30 +319,82 @@ static int wacom_gr_parse_report(struct hid_device *hdev, ...@@ -314,30 +319,82 @@ static int wacom_gr_parse_report(struct hid_device *hdev,
return 1; return 1;
} }
static void wacom_i4_parse_button_report(struct wacom_data *wdata,
struct input_dev *input, unsigned char *data)
{
__u16 new_butstate;
__u8 new_whlstate;
__u8 sync = 0;
new_whlstate = data[1];
if (new_whlstate != wdata->whlstate) {
wdata->whlstate = new_whlstate;
if (new_whlstate & 0x80) {
input_report_key(input, BTN_TOUCH, 1);
input_report_abs(input, ABS_WHEEL, (new_whlstate & 0x7f));
input_report_key(input, BTN_TOOL_FINGER, 1);
} else {
input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_WHEEL, 0);
input_report_key(input, BTN_TOOL_FINGER, 0);
}
sync = 1;
}
new_butstate = (data[3] << 1) | (data[2] & 0x01);
if (new_butstate != wdata->butstate) {
wdata->butstate = new_butstate;
input_report_key(input, BTN_0, new_butstate & 0x001);
input_report_key(input, BTN_1, new_butstate & 0x002);
input_report_key(input, BTN_2, new_butstate & 0x004);
input_report_key(input, BTN_3, new_butstate & 0x008);
input_report_key(input, BTN_4, new_butstate & 0x010);
input_report_key(input, BTN_5, new_butstate & 0x020);
input_report_key(input, BTN_6, new_butstate & 0x040);
input_report_key(input, BTN_7, new_butstate & 0x080);
input_report_key(input, BTN_8, new_butstate & 0x100);
input_report_key(input, BTN_TOOL_FINGER, 1);
sync = 1;
}
if (sync) {
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
input_sync(input);
}
}
static void wacom_i4_parse_pen_report(struct wacom_data *wdata, static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
struct input_dev *input, unsigned char *data) struct input_dev *input, unsigned char *data)
{ {
__u16 x, y, pressure; __u16 x, y, pressure;
__u32 id; __u8 distance;
switch (data[1]) { switch (data[1]) {
case 0x80: /* Out of proximity report */ case 0x80: /* Out of proximity report */
wdata->tool = 0;
input_report_key(input, BTN_TOUCH, 0); input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_PRESSURE, 0); input_report_abs(input, ABS_PRESSURE, 0);
input_report_key(input, BTN_STYLUS, 0);
input_report_key(input, BTN_STYLUS2, 0);
input_report_key(input, wdata->tool, 0); input_report_key(input, wdata->tool, 0);
input_report_abs(input, ABS_MISC, 0);
input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
wdata->tool = 0;
input_sync(input); input_sync(input);
break; break;
case 0xC2: /* Tool report */ case 0xC2: /* Tool report */
id = ((data[2] << 4) | (data[3] >> 4) | wdata->id = ((data[2] << 4) | (data[3] >> 4) |
((data[7] & 0x0f) << 20) | ((data[7] & 0x0f) << 20) |
((data[8] & 0xf0) << 12)) & 0xfffff; ((data[8] & 0xf0) << 12));
wdata->serial = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
switch (id) { switch (wdata->id) {
case 0x802: case 0x100802:
wdata->tool = BTN_TOOL_PEN; wdata->tool = BTN_TOOL_PEN;
break; break;
case 0x80A: case 0x10080A:
wdata->tool = BTN_TOOL_RUBBER; wdata->tool = BTN_TOOL_RUBBER;
break; break;
} }
...@@ -347,6 +404,7 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata, ...@@ -347,6 +404,7 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
y = data[4] << 9 | data[5] << 1 | (data[9] & 0x01); y = data[4] << 9 | data[5] << 1 | (data[9] & 0x01);
pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5) pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5)
| (data[1] & 0x01); | (data[1] & 0x01);
distance = (data[9] >> 2) & 0x3f;
input_report_key(input, BTN_TOUCH, pressure > 1); input_report_key(input, BTN_TOUCH, pressure > 1);
...@@ -356,6 +414,10 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata, ...@@ -356,6 +414,10 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
input_report_abs(input, ABS_X, x); input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y); input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_PRESSURE, pressure); input_report_abs(input, ABS_PRESSURE, pressure);
input_report_abs(input, ABS_DISTANCE, distance);
input_report_abs(input, ABS_MISC, wdata->id);
input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
input_report_key(input, wdata->tool, 1);
input_sync(input); input_sync(input);
break; break;
} }
...@@ -377,6 +439,7 @@ static void wacom_i4_parse_report(struct hid_device *hdev, ...@@ -377,6 +439,7 @@ static void wacom_i4_parse_report(struct hid_device *hdev,
wdata->features = data[2]; wdata->features = data[2];
break; break;
case 0x0C: /* Button report */ case 0x0C: /* Button report */
wacom_i4_parse_button_report(wdata, input, data);
break; break;
default: default:
hid_err(hdev, "Unknown report: %d,%d\n", data[0], data[1]); hid_err(hdev, "Unknown report: %d,%d\n", data[0], data[1]);
...@@ -451,9 +514,7 @@ static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi, ...@@ -451,9 +514,7 @@ static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi,
__set_bit(BTN_MIDDLE, input->keybit); __set_bit(BTN_MIDDLE, input->keybit);
/* Pad */ /* Pad */
input->evbit[0] |= BIT(EV_MSC); input_set_capability(input, EV_MSC, MSC_SERIAL);
__set_bit(MSC_SERIAL, input->mscbit);
__set_bit(BTN_0, input->keybit); __set_bit(BTN_0, input->keybit);
__set_bit(BTN_1, input->keybit); __set_bit(BTN_1, input->keybit);
...@@ -471,9 +532,20 @@ static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi, ...@@ -471,9 +532,20 @@ static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi,
input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0); input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
break; break;
case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
__set_bit(ABS_WHEEL, input->absbit);
__set_bit(ABS_MISC, input->absbit);
__set_bit(BTN_2, input->keybit);
__set_bit(BTN_3, input->keybit);
__set_bit(BTN_4, input->keybit);
__set_bit(BTN_5, input->keybit);
__set_bit(BTN_6, input->keybit);
__set_bit(BTN_7, input->keybit);
__set_bit(BTN_8, input->keybit);
input_set_abs_params(input, ABS_WHEEL, 0, 71, 0, 0);
input_set_abs_params(input, ABS_X, 0, 40640, 4, 0); input_set_abs_params(input, ABS_X, 0, 40640, 4, 0);
input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0); input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0);
input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0); input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0);
input_set_abs_params(input, ABS_DISTANCE, 0, 63, 0, 0);
break; break;
} }
...@@ -518,6 +590,7 @@ static int wacom_probe(struct hid_device *hdev, ...@@ -518,6 +590,7 @@ static int wacom_probe(struct hid_device *hdev,
wacom_poke(hdev, 1); wacom_poke(hdev, 1);
break; break;
case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH: case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
sprintf(hdev->name, "%s", "Wacom Intuos4 WL");
wdata->features = 0; wdata->features = 0;
wacom_set_features(hdev); wacom_set_features(hdev);
break; break;
......
...@@ -43,139 +43,14 @@ ...@@ -43,139 +43,14 @@
*/ */
/* /*
* Original Slim Tablet 5.8 inch report descriptor. * See Slim Tablet 5.8 inch description, device and HID report descriptors at
* * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Slim_Tablet_5.8%22
* All the reports except the report with ID 16 (the stylus) are unused,
* possibly because the tablet is not configured to, or because they were
* just copied from a more capable model. The full purpose of features
* described for report ID 2 is unknown.
*
* The stylus buttons are described as three bit fields, whereas actually
* it's an "array", i.e. they're reported as button numbers (1, 2 and 3).
* The "eraser" field is not used. There is also a "push" without a "pop" in
* the stylus description.
*
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (1),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (2),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth), ; Azimuth (3Fh, dynamic value)
* Usage (Altitude), ; Altitude (40h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (3),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Invert), ; Invert (3Ch, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Usage (In Range), ; In range (32h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (10000),
* Physical Minimum (0),
* Physical Maximum (10000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Logical Maximum (6000),
* Physical Maximum (6000),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection
*/ */
/* Size of the original report descriptor of Slim Tablet 5.8 inch */ /* Size of the original report descriptor of Slim Tablet 5.8 inch */
#define SLIM_TABLET_5_8_INCH_RDESC_ORIG_SIZE 222 #define SLIM_TABLET_5_8_INCH_RDESC_ORIG_SIZE 222
/* /* Fixed Slim Tablet 5.8 inch descriptor */
* Fixed Slim Tablet 5.8 inch descriptor.
*
* All the reports except the stylus report (ID 16) were removed as unused.
* The stylus buttons description was fixed.
*/
static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = { static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
...@@ -224,158 +99,14 @@ static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = { ...@@ -224,158 +99,14 @@ static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = {
}; };
/* /*
* Original Slim Tablet 12.1 inch report descriptor. * See Slim Tablet 12.1 inch description, device and HID report descriptors at
* * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Slim_Tablet_12.1%22
* The descriptor is similar to the Slim Tablet 5.8 inch descriptor with the
* addition of a keyboard report, seemingly unused. It may have get here
* from a Media Tablet - probably an unimplemented feature.
*
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (1),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (2),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth), ; Azimuth (3Fh, dynamic value)
* Usage (Altitude), ; Altitude (40h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (3),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Invert), ; Invert (3Ch, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Usage (In Range), ; In range (32h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (20000),
* Physical Minimum (0),
* Physical Maximum (20000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Logical Maximum (12500),
* Physical Maximum (12500),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Keyboard), ; Keyboard (06h, application collection)
* Collection (Application),
* Report ID (13),
* Usage Page (Keyboard), ; Keyboard/keypad (07h)
* Usage Minimum (KB Leftcontrol), ; Keyboard left control
* ; (E0h, dynamic value)
* Usage Maximum (KB Right GUI), ; Keyboard right GUI (E7h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (8),
* Input (Variable),
* Report Size (8),
* Report Count (1),
* Input (Constant),
* Usage Page (Keyboard), ; Keyboard/keypad (07h)
* Usage Minimum (None), ; No event (00h, selector)
* Usage Maximum (KB Application), ; Keyboard Application (65h, selector)
* Logical Minimum (0),
* Logical Maximum (101),
* Report Size (8),
* Report Count (5),
* Input,
* End Collection
*/ */
/* Size of the original report descriptor of Slim Tablet 12.1 inch */ /* Size of the original report descriptor of Slim Tablet 12.1 inch */
#define SLIM_TABLET_12_1_INCH_RDESC_ORIG_SIZE 269 #define SLIM_TABLET_12_1_INCH_RDESC_ORIG_SIZE 269
/* /* Fixed Slim Tablet 12.1 inch descriptor */
* Fixed Slim Tablet 12.1 inch descriptor.
*
* All the reports except the stylus report (ID 16) were removed as unused.
* The stylus buttons description was fixed.
*/
static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = { static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
...@@ -424,217 +155,128 @@ static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = { ...@@ -424,217 +155,128 @@ static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = {
}; };
/* /*
* Original Media Tablet 10.6 inch report descriptor. * See Q Pad description, device and HID report descriptors at
* * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Q_Pad
* There are at least two versions of this model in the wild. They are
* represented by Genius G-Pen M609 (older version) and Genius G-Pen M609X
* (newer version).
*
* Both versions have the usual pen with two barrel buttons and two
* identical wheels with center buttons in the top corners of the tablet
* base. They also have buttons on the top, between the wheels, for
* selecting the wheels' functions and wide/standard mode. In the wide mode
* the whole working surface is sensed, in the standard mode a narrower area
* is sensed, but the logical report extents remain the same. These modes
* correspond roughly to 16:9 and 4:3 aspect ratios respectively.
*
* The older version has three wheel function buttons ("scroll", "zoom" and
* "volume") and two separate buttons for wide and standard mode. The newer
* version has four wheel function buttons (plus "brush") and only one
* button is used for selecting wide/standard mode. So, the total number of
* buttons remains the same, but one of the mode buttons is repurposed as a
* wheels' function button in the newer version.
*
* The wheel functions are:
* scroll - the wheels act as scroll wheels, the center buttons switch
* between vertical and horizontal scrolling;
* zoom - the wheels zoom in/out, the buttons supposedly reset to 100%;
* volume - the wheels control the sound volume, the buttons mute;
* brush - the wheels are supposed to control brush width in a graphics
* editor, the buttons do nothing.
*
* Below is the newer version's report descriptor. It may very well be that
* the older version's descriptor is different and thus it won't be
* supported.
*
* The mouse report (ID 1) only uses the wheel field for reporting the tablet
* wheels' scroll mode. The keyboard report (ID 13) is used to report the
* wheels' zoom and brush control functions as key presses. The report ID 12
* is used to report the wheels' volume control functions. The stylus report
* (ID 16) has the same problems as the Slim Tablet 5.8 inch report has.
*
* The rest of the reports are unused, at least in the default configuration.
* The purpose of the features is unknown.
*
* Usage Page (Desktop),
* Usage (Mouse),
* Collection (Application),
* Report ID (1),
* Usage (Pointer),
* Collection (Physical),
* Usage Page (Button),
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Usage (Y),
* Usage (Wheel),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer),
* Usage (Pen),
* Collection (Application),
* Report ID (2),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth),
* Usage (Altitude),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus),
* Collection (Physical),
* Usage (Tip Switch),
* Usage (Barrel Switch),
* Usage (Invert),
* Usage (Eraser),
* Usage (In Range),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (18000),
* Physical Minimum (0),
* Physical Maximum (18000),
* Input (Variable),
* Usage (Y),
* Logical Maximum (11000),
* Physical Maximum (11000),
* Input (Variable),
* Usage Page (Digitizer),
* Usage (Tip Pressure),
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop),
* Usage (Keyboard),
* Collection (Application),
* Report ID (13),
* Usage Page (Keyboard),
* Usage Minimum (KB Leftcontrol),
* Usage Maximum (KB Right GUI),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (8),
* Input (Variable),
* Report Size (8),
* Report Count (1),
* Input (Constant),
* Usage Page (Keyboard),
* Usage Minimum (None),
* Usage Maximum (KB Application),
* Logical Minimum (0),
* Logical Maximum (101),
* Report Size (8),
* Report Count (5),
* Input,
* End Collection,
* Usage Page (Consumer),
* Usage (Consumer Control),
* Collection (Application),
* Report ID (12),
* Usage (Volume Inc),
* Usage (Volume Dec),
* Usage (Mute),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable, Relative),
* Report Size (5),
* Report Count (1),
* Input (Constant, Variable, Relative),
* End Collection
*/ */
/* Size of the original report descriptor of Media Tablet 10.6 inch */ /* Size of the original report descriptor of Q Pad */
#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300 #define Q_PAD_RDESC_ORIG_SIZE 241
/* Fixed Q Pad descriptor */
static __u8 q_pad_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x15, 0x01, /* Logical Minimum (1), */
0x25, 0x03, /* Logical Maximum (3), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x80, /* Input, */
0x09, 0x32, /* Usage (In Range), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0x14, /* Logical Minimum (0), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x65, 0x13, /* Unit (Inch), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x70, 0x17, /* Physical Maximum (6000), */
0x26, 0x00, 0x30, /* Logical Maximum (12288), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x94, 0x11, /* Physical Maximum (4500), */
0x26, 0x00, 0x24, /* Logical Maximum (9216), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/* /*
* Fixed Media Tablet 10.6 inch descriptor. * See description, device and HID report descriptors of tablet with PID 0038 at
* * http://sf.net/apps/mediawiki/digimend/?title=Waltop_PID_0038
* The descriptions of reports unused in the default configuration are */
* removed. The stylus report (ID 16) is fixed similarly to Slim Tablet 5.8
* inch. The unused mouse report (ID 1) fields are replaced with constant /* Size of the original report descriptor of tablet with PID 0038 */
* padding. #define PID_0038_RDESC_ORIG_SIZE 241
*
* The keyboard report (ID 13) is hacked to instead have an "array" field /*
* reporting consumer page controls, and all the unused bits are masked out * Fixed report descriptor for tablet with PID 0038.
* with constant padding. The "brush" wheels' function is represented as "Scan */
* Previous/Next Track" controls due to the lack of brush controls in the static __u8 pid_0038_rdesc_fixed[] = {
* usage tables specification. 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x15, 0x01, /* Logical Minimum (1), */
0x25, 0x03, /* Logical Maximum (3), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x80, /* Input, */
0x09, 0x32, /* Usage (In Range), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0x14, /* Logical Minimum (0), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x65, 0x13, /* Unit (Inch), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x2E, 0x22, /* Physical Maximum (8750), */
0x26, 0x00, 0x46, /* Logical Maximum (17920), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x82, 0x14, /* Physical Maximum (5250), */
0x26, 0x00, 0x2A, /* Logical Maximum (10752), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* See Media Tablet 10.6 inch description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_Media_Tablet_10.6%22
*/ */
/* Size of the original report descriptor of Media Tablet 10.6 inch */
#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300
/* Fixed Media Tablet 10.6 inch descriptor */
static __u8 media_tablet_10_6_inch_rdesc_fixed[] = { static __u8 media_tablet_10_6_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
...@@ -745,187 +387,14 @@ static __u8 media_tablet_10_6_inch_rdesc_fixed[] = { ...@@ -745,187 +387,14 @@ static __u8 media_tablet_10_6_inch_rdesc_fixed[] = {
}; };
/* /*
* Original Media Tablet 14.1 inch report descriptor. * See Media Tablet 14.1 inch description, device and HID report descriptors at
* * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Media_Tablet_14.1%22
* There are at least two versions of this model in the wild. They are
* represented by Genius G-Pen M712 (older version) and Genius G-Pen M712X
* (newer version). The hardware difference between these versions is the same
* as between older and newer versions of Media Tablet 10.6 inch. The report
* descriptors are identical for both versions.
*
* The function, behavior and report descriptor of this tablet is similar to
* that of Media Tablet 10.6 inch. However, there is one more field (with
* Consumer AC Pan usage) in the mouse description. Then the tablet X and Y
* logical extents both get scaled to 0..16383 range (a hardware limit?),
* which kind of defeats the advertised 4000 LPI resolution, considering the
* physical extents of 12x7.25 inches. Plus, reports 5, 10 and 255 are used
* sometimes (while moving the pen) with unknown purpose. Also, the key codes
* generated for zoom in/out are different.
*
* Usage Page (Desktop),
* Usage (Mouse),
* Collection (Application),
* Report ID (1),
* Usage (Pointer),
* Collection (Physical),
* Usage Page (Button),
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Usage (Y),
* Usage (Wheel),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* Usage Page (Consumer),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (1),
* Usage (AC Pan),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer),
* Usage (Pen),
* Collection (Application),
* Report ID (2),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth),
* Usage (Altitude),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus),
* Collection (Physical),
* Usage (Tip Switch),
* Usage (Barrel Switch),
* Usage (Invert),
* Usage (Eraser),
* Usage (In Range),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (16383),
* Physical Minimum (0),
* Physical Maximum (16383),
* Input (Variable),
* Usage (Y),
* Input (Variable),
* Usage Page (Digitizer),
* Usage (Tip Pressure),
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop),
* Usage (Keyboard),
* Collection (Application),
* Report ID (13),
* Usage Page (Keyboard),
* Usage Minimum (KB Leftcontrol),
* Usage Maximum (KB Right GUI),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (8),
* Input (Variable),
* Report Size (8),
* Report Count (1),
* Input (Constant),
* Usage Page (Keyboard),
* Usage Minimum (None),
* Usage Maximum (KB Application),
* Logical Minimum (0),
* Logical Maximum (101),
* Report Size (8),
* Report Count (5),
* Input,
* End Collection,
* Usage Page (Consumer),
* Usage (Consumer Control),
* Collection (Application),
* Report ID (12),
* Usage (Volume Inc),
* Usage (Volume Dec),
* Usage (Mute),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable, Relative),
* Report Size (5),
* Report Count (1),
* Input (Constant, Variable, Relative),
* End Collection
*/ */
/* Size of the original report descriptor of Media Tablet 14.1 inch */ /* Size of the original report descriptor of Media Tablet 14.1 inch */
#define MEDIA_TABLET_14_1_INCH_RDESC_ORIG_SIZE 309 #define MEDIA_TABLET_14_1_INCH_RDESC_ORIG_SIZE 309
/* /* Fixed Media Tablet 14.1 inch descriptor */
* Fixed Media Tablet 14.1 inch descriptor.
* It is fixed similarly to the Media Tablet 10.6 inch descriptor.
*/
static __u8 media_tablet_14_1_inch_rdesc_fixed[] = { static __u8 media_tablet_14_1_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */ 0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */ 0x09, 0x02, /* Usage (Pen), */
...@@ -1033,6 +502,47 @@ static __u8 media_tablet_14_1_inch_rdesc_fixed[] = { ...@@ -1033,6 +502,47 @@ static __u8 media_tablet_14_1_inch_rdesc_fixed[] = {
0xC0 /* End Collection */ 0xC0 /* End Collection */
}; };
struct waltop_state {
u8 pressure0;
u8 pressure1;
};
static int waltop_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int ret;
struct waltop_state *s;
s = kzalloc(sizeof(*s), GFP_KERNEL);
if (s == NULL) {
hid_err(hdev, "can't allocate device state\n");
ret = -ENOMEM;
goto err;
}
s->pressure0 = 0;
s->pressure1 = 0;
hid_set_drvdata(hdev, s);
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err;
}
return 0;
err:
kfree(s);
return ret;
}
static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize) unsigned int *rsize)
{ {
...@@ -1049,6 +559,18 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, ...@@ -1049,6 +559,18 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
*rsize = sizeof(slim_tablet_12_1_inch_rdesc_fixed); *rsize = sizeof(slim_tablet_12_1_inch_rdesc_fixed);
} }
break; break;
case USB_DEVICE_ID_WALTOP_Q_PAD:
if (*rsize == Q_PAD_RDESC_ORIG_SIZE) {
rdesc = q_pad_rdesc_fixed;
*rsize = sizeof(q_pad_rdesc_fixed);
}
break;
case USB_DEVICE_ID_WALTOP_PID_0038:
if (*rsize == PID_0038_RDESC_ORIG_SIZE) {
rdesc = pid_0038_rdesc_fixed;
*rsize = sizeof(pid_0038_rdesc_fixed);
}
break;
case USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH: case USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH:
if (*rsize == MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE) { if (*rsize == MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE) {
rdesc = media_tablet_10_6_inch_rdesc_fixed; rdesc = media_tablet_10_6_inch_rdesc_fixed;
...@@ -1065,11 +587,53 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, ...@@ -1065,11 +587,53 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
return rdesc; return rdesc;
} }
static int waltop_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
/* If this is a pen input report of a tablet with PID 0038 */
if (hdev->product == USB_DEVICE_ID_WALTOP_PID_0038 &&
report->type == HID_INPUT_REPORT &&
report->id == 16 &&
size == 8) {
struct waltop_state *s = hid_get_drvdata(hdev);
/*
* Ignore maximum pressure reported when a barrel button is
* pressed.
*/
/* If a barrel button is pressed */
if ((data[1] & 0xF) > 1) {
/* Use the last known pressure */
data[6] = s->pressure0;
data[7] = s->pressure1;
} else {
/* Remember reported pressure */
s->pressure0 = data[6];
s->pressure1 = data[7];
}
}
return 0;
}
static void waltop_remove(struct hid_device *hdev)
{
struct waltop_state *s = hid_get_drvdata(hdev);
hid_hw_stop(hdev);
kfree(s);
}
static const struct hid_device_id waltop_devices[] = { static const struct hid_device_id waltop_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_Q_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_PID_0038) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
...@@ -1081,7 +645,10 @@ MODULE_DEVICE_TABLE(hid, waltop_devices); ...@@ -1081,7 +645,10 @@ MODULE_DEVICE_TABLE(hid, waltop_devices);
static struct hid_driver waltop_driver = { static struct hid_driver waltop_driver = {
.name = "waltop", .name = "waltop",
.id_table = waltop_devices, .id_table = waltop_devices,
.probe = waltop_probe,
.report_fixup = waltop_report_fixup, .report_fixup = waltop_report_fixup,
.raw_event = waltop_raw_event,
.remove = waltop_remove,
}; };
static int __init waltop_init(void) static int __init waltop_init(void)
......
...@@ -60,6 +60,7 @@ static const struct hid_blacklist { ...@@ -60,6 +60,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
...@@ -74,6 +75,7 @@ static const struct hid_blacklist { ...@@ -74,6 +75,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET }, { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
...@@ -95,6 +97,8 @@ static const struct hid_blacklist { ...@@ -95,6 +97,8 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X, HID_QUIRK_MULTI_INPUT },
{ 0, 0 } { 0, 0 }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment