Skip to content

L
linux
Commit d4921643 authored by Hugo Villeneuve's avatar Hugo Villeneuve Committed by Greg Kroah-Hartman
Browse files
Options

serial: sc16is7xx: split into core and I2C/SPI parts (core) 

Split the common code from sc16is7xx driver and move the I2C and SPI bus
parts into interface-specific source files.

sc16is7xx becomes the core functions which can support multiple bus
interfaces like I2C and SPI.

No functional changes intended.

Also simplify and improve Kconfig entries.
  - Capitalize SPI keyword for consistency
  - Display list of supported ICs each on a separate line (and aligned) to
    facilitate locating a specific IC model
  - Add Manufacturer name at start of description string
  - Add UART keyword to description string
Suggested-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: default avatarHugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409154253.3043822-4-hugo@hugovil.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7f335744
Show whitespace changes
Inline Side-by-side
Showing with 248 additions and 218 deletions
drivers/tty/serial/Kconfig
View file @ d4921643
......@@ -1024,41 +1024,30 @@ config SERIAL_SCCNXP_CONSOLE
Support for console on SCCNXP serial ports.
config SERIAL_SC16IS7XX_CORE
tristate
config SERIAL_SC16IS7XX
tristate "SC16IS7xx serial support"
tristate "NXP SC16IS7xx UART support"
select SERIAL_CORE
depends on (SPI_MASTER && !I2C) || I2C
select SERIAL_SC16IS7XX_SPI if SPI_MASTER
select SERIAL_SC16IS7XX_I2C if I2C
help
This selects support for SC16IS7xx serial ports.
Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
SC16IS760 and SC16IS762. Select supported buses using options below.
Core driver for NXP SC16IS7xx UARTs.
Supported ICs are:
SC16IS740
SC16IS741
SC16IS750
SC16IS752
SC16IS760
SC16IS762
The driver supports both I2C and SPI interfaces.
config SERIAL_SC16IS7XX_I2C
bool "SC16IS7xx for I2C interface"
depends on SERIAL_SC16IS7XX
depends on I2C
select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
select REGMAP_I2C if I2C
default y
help
Enable SC16IS7xx driver on I2C bus,
If required say y, and say n to i2c if not required,
Enabled by default to support oldconfig.
You must select at least one bus for the driver to be built.
tristate
select REGMAP_I2C
config SERIAL_SC16IS7XX_SPI
bool "SC16IS7xx for spi interface"
depends on SERIAL_SC16IS7XX
depends on SPI_MASTER
select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
select REGMAP_SPI if SPI_MASTER
help
Enable SC16IS7xx driver on SPI bus,
If required say y, and say n to spi if not required,
This is additional support to existing driver.
You must select at least one bus for the driver to be built.
tristate
select REGMAP_SPI
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
......
drivers/tty/serial/Makefile
View file @ d4921643
......@@ -76,6 +76,8 @@ obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
obj-$(CONFIG_SERIAL_SC16IS7XX_SPI) += sc16is7xx_spi.o
obj-$(CONFIG_SERIAL_SC16IS7XX_I2C) += sc16is7xx_i2c.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
......
drivers/tty/serial/sc16is7xx.c
View file @ d4921643
// SPDX-License-Identifier: GPL-2.0+
/*
* SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint
* Author: Jon Ringle <jringle@gridpoint.com>
* SC16IS7xx tty serial driver - common code
*
* Copyright (C) 2014 GridPoint
* Author: Jon Ringle <jringle@gridpoint.com>
* Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#undef DEFAULT_SYMBOL_NAMESPACE
#define DEFAULT_SYMBOL_NAMESPACE SERIAL_NXP_SC16IS7XX
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/property.h>
......@@ -21,15 +24,15 @@
#include <linux/sched.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
#include <linux/units.h>
#define SC16IS7XX_NAME "sc16is7xx"
#include "sc16is7xx.h"
#define SC16IS7XX_MAX_DEVS 8
#define SC16IS7XX_MAX_PORTS 2 /* Maximum number of UART ports per IC. */
/* SC16IS7XX register definitions */
#define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */
......@@ -302,16 +305,9 @@
/* Misc definitions */
#define SC16IS7XX_SPI_READ_BIT BIT(7)
#define SC16IS7XX_FIFO_SIZE (64)
#define SC16IS7XX_GPIOS_PER_BANK 4
struct sc16is7xx_devtype {
char name[10];
int nr_gpio;
int nr_uart;
};
#define SC16IS7XX_RECONF_MD (1 << 0)
#define SC16IS7XX_RECONF_IER (1 << 1)
#define SC16IS7XX_RECONF_RS485 (1 << 2)
......@@ -492,35 +488,40 @@ static void sc16is7xx_stop_rx(struct uart_port *port)
sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT);
}
static const struct sc16is7xx_devtype sc16is74x_devtype = {
const struct sc16is7xx_devtype sc16is74x_devtype = {
.name = "SC16IS74X",
.nr_gpio = 0,
.nr_uart = 1,
};
EXPORT_SYMBOL_GPL(sc16is74x_devtype);
static const struct sc16is7xx_devtype sc16is750_devtype = {
const struct sc16is7xx_devtype sc16is750_devtype = {
.name = "SC16IS750",
.nr_gpio = 8,
.nr_uart = 1,
};
EXPORT_SYMBOL_GPL(sc16is750_devtype);
static const struct sc16is7xx_devtype sc16is752_devtype = {
const struct sc16is7xx_devtype sc16is752_devtype = {
.name = "SC16IS752",
.nr_gpio = 8,
.nr_uart = 2,
};
EXPORT_SYMBOL_GPL(sc16is752_devtype);
static const struct sc16is7xx_devtype sc16is760_devtype = {
const struct sc16is7xx_devtype sc16is760_devtype = {
.name = "SC16IS760",
.nr_gpio = 8,
.nr_uart = 1,
};
EXPORT_SYMBOL_GPL(sc16is760_devtype);
static const struct sc16is7xx_devtype sc16is762_devtype = {
const struct sc16is7xx_devtype sc16is762_devtype = {
.name = "SC16IS762",
.nr_gpio = 8,
.nr_uart = 2,
};
EXPORT_SYMBOL_GPL(sc16is762_devtype);
static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
{
......@@ -1453,8 +1454,7 @@ static const struct serial_rs485 sc16is7xx_rs485_supported = {
.delay_rts_after_send = 1, /* Not supported but keep returning -EINVAL */
};
static int sc16is7xx_probe(struct device *dev,
const struct sc16is7xx_devtype *devtype,
int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
struct regmap *regmaps[], int irq)
{
unsigned long freq = 0, *pfreq = dev_get_platdata(dev);
......@@ -1647,8 +1647,9 @@ static int sc16is7xx_probe(struct device *dev,
return ret;
}
EXPORT_SYMBOL_GPL(sc16is7xx_probe);
static void sc16is7xx_remove(struct device *dev)
void sc16is7xx_remove(struct device *dev)
{
struct sc16is7xx_port *s = dev_get_drvdata(dev);
int i;
......@@ -1670,8 +1671,9 @@ static void sc16is7xx_remove(struct device *dev)
clk_disable_unprepare(s->clk);
}
EXPORT_SYMBOL_GPL(sc16is7xx_remove);
static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
{ .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, },
{ .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, },
{ .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, },
......@@ -1680,9 +1682,10 @@ static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
{ .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, },
{ }
};
EXPORT_SYMBOL_GPL(sc16is7xx_dt_ids);
MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids);
static struct regmap_config regcfg = {
struct regmap_config sc16is7xx_regcfg = {
.reg_bits = 5,
.pad_bits = 3,
.val_bits = 8,
......@@ -1695,8 +1698,9 @@ static struct regmap_config regcfg = {
.max_raw_write = SC16IS7XX_FIFO_SIZE,
.max_register = SC16IS7XX_EFCR_REG,
};
EXPORT_SYMBOL_GPL(sc16is7xx_regcfg);
static const char *sc16is7xx_regmap_name(u8 port_id)
const char *sc16is7xx_regmap_name(u8 port_id)
{
switch (port_id) {
case 0: return "port0";
......@@ -1706,184 +1710,27 @@ static const char *sc16is7xx_regmap_name(u8 port_id)
return NULL;
}
}
EXPORT_SYMBOL_GPL(sc16is7xx_regmap_name);
static unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id)
unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id)
{
/* CH1,CH0 are at bits 2:1. */
return port_id << 1;
}
#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
static int sc16is7xx_spi_probe(struct spi_device *spi)
{
const struct sc16is7xx_devtype *devtype;
struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
unsigned int i;
int ret;
/* Setup SPI bus */
spi->bits_per_word = 8;
/* For all variants, only mode 0 is supported */
if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;
devtype = spi_get_device_match_data(spi);
if (!devtype)
return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n");
for (i = 0; i < devtype->nr_uart; i++) {
regcfg.name = sc16is7xx_regmap_name(i);
/*
* If read_flag_mask is 0, the regmap code sets it to a default
* of 0x80. Since we specify our own mask, we must add the READ
* bit ourselves:
*/
regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i) |
SC16IS7XX_SPI_READ_BIT;
regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i);
regmaps[i] = devm_regmap_init_spi(spi, &regcfg);
}
return sc16is7xx_probe(&spi->dev, devtype, regmaps, spi->irq);
}
static void sc16is7xx_spi_remove(struct spi_device *spi)
{
sc16is7xx_remove(&spi->dev);
}
static const struct spi_device_id sc16is7xx_spi_id_table[] = {
{ "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
{ "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
{ }
};
MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
static struct spi_driver sc16is7xx_spi_uart_driver = {
.driver = {
.name = SC16IS7XX_NAME,
.of_match_table = sc16is7xx_dt_ids,
},
.probe = sc16is7xx_spi_probe,
.remove = sc16is7xx_spi_remove,
.id_table = sc16is7xx_spi_id_table,
};
#endif
#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
static int sc16is7xx_i2c_probe(struct i2c_client *i2c)
{
const struct sc16is7xx_devtype *devtype;
struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
unsigned int i;
devtype = i2c_get_match_data(i2c);
if (!devtype)
return dev_err_probe(&i2c->dev, -ENODEV, "Failed to match device\n");
for (i = 0; i < devtype->nr_uart; i++) {
regcfg.name = sc16is7xx_regmap_name(i);
regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i);
regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i);
regmaps[i] = devm_regmap_init_i2c(i2c, &regcfg);
}
return sc16is7xx_probe(&i2c->dev, devtype, regmaps, i2c->irq);
}
static void sc16is7xx_i2c_remove(struct i2c_client *client)
{
sc16is7xx_remove(&client->dev);
}
static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
{ "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
{ "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
{ }
};
MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
static struct i2c_driver sc16is7xx_i2c_uart_driver = {
.driver = {
.name = SC16IS7XX_NAME,
.of_match_table = sc16is7xx_dt_ids,
},
.probe = sc16is7xx_i2c_probe,
.remove = sc16is7xx_i2c_remove,
.id_table = sc16is7xx_i2c_id_table,
};
#endif
EXPORT_SYMBOL_GPL(sc16is7xx_regmap_port_mask);
static int __init sc16is7xx_init(void)
{
int ret;
ret = uart_register_driver(&sc16is7xx_uart);
if (ret) {
pr_err("Registering UART driver failed\n");
return ret;
}
#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
goto err_i2c;
}
#endif
#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx spi --> %d\n", ret);
goto err_spi;
}
#endif
return ret;
#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
err_spi:
#endif
#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
i2c_del_driver(&sc16is7xx_i2c_uart_driver);
err_i2c:
#endif
uart_unregister_driver(&sc16is7xx_uart);
return ret;
return uart_register_driver(&sc16is7xx_uart);
}
module_init(sc16is7xx_init);
static void __exit sc16is7xx_exit(void)
{
#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
i2c_del_driver(&sc16is7xx_i2c_uart_driver);
#endif
#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
spi_unregister_driver(&sc16is7xx_spi_uart_driver);
#endif
uart_unregister_driver(&sc16is7xx_uart);
}
module_exit(sc16is7xx_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>");
MODULE_DESCRIPTION("SC16IS7XX serial driver");
MODULE_DESCRIPTION("SC16IS7xx tty serial core driver");
drivers/tty/serial/sc16is7xx.h 0 → 100644
View file @ d4921643
/* SPDX-License-Identifier: GPL-2.0+ */
/* SC16IS7xx SPI/I2C tty serial driver */
#ifndef _SC16IS7XX_H_
#define _SC16IS7XX_H_
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
#include <linux/types.h>
#define SC16IS7XX_NAME "sc16is7xx"
#define SC16IS7XX_MAX_PORTS 2 /* Maximum number of UART ports per IC. */
struct device;
struct sc16is7xx_devtype {
char name[10];
int nr_gpio;
int nr_uart;
};
extern struct regmap_config sc16is7xx_regcfg;
extern const struct of_device_id sc16is7xx_dt_ids[];
extern const struct sc16is7xx_devtype sc16is74x_devtype;
extern const struct sc16is7xx_devtype sc16is750_devtype;
extern const struct sc16is7xx_devtype sc16is752_devtype;
extern const struct sc16is7xx_devtype sc16is760_devtype;
extern const struct sc16is7xx_devtype sc16is762_devtype;
const char *sc16is7xx_regmap_name(u8 port_id);
unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id);
int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
struct regmap *regmaps[], int irq);
void sc16is7xx_remove(struct device *dev);
#endif /* _SC16IS7XX_H_ */
drivers/tty/serial/sc16is7xx_i2c.c 0 → 100644
View file @ d4921643
// SPDX-License-Identifier: GPL-2.0+
/* SC16IS7xx I2C interface driver */
#include <linux/dev_printk.h>
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/string.h>
#include "sc16is7xx.h"
static int sc16is7xx_i2c_probe(struct i2c_client *i2c)
{
const struct sc16is7xx_devtype *devtype;
struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
unsigned int i;
devtype = i2c_get_match_data(i2c);
if (!devtype)
return dev_err_probe(&i2c->dev, -ENODEV, "Failed to match device\n");
for (i = 0; i < devtype->nr_uart; i++) {
sc16is7xx_regcfg.name = sc16is7xx_regmap_name(i);
sc16is7xx_regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i);
sc16is7xx_regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i);
regmaps[i] = devm_regmap_init_i2c(i2c, &sc16is7xx_regcfg);
}
return sc16is7xx_probe(&i2c->dev, devtype, regmaps, i2c->irq);
}
static void sc16is7xx_i2c_remove(struct i2c_client *client)
{
sc16is7xx_remove(&client->dev);
}
static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
{ "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
{ "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
{ }
};
MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
static struct i2c_driver sc16is7xx_i2c_driver = {
.driver = {
.name = SC16IS7XX_NAME,
.of_match_table = sc16is7xx_dt_ids,
},
.probe = sc16is7xx_i2c_probe,
.remove = sc16is7xx_i2c_remove,
.id_table = sc16is7xx_i2c_id_table,
};
module_i2c_driver(sc16is7xx_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SC16IS7xx I2C interface driver");
MODULE_IMPORT_NS(SERIAL_NXP_SC16IS7XX);
drivers/tty/serial/sc16is7xx_spi.c 0 → 100644
View file @ d4921643
// SPDX-License-Identifier: GPL-2.0+
/* SC16IS7xx SPI interface driver */
#include <linux/dev_printk.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include <linux/string.h>
#include <linux/units.h>
#include "sc16is7xx.h"
/* SPI definitions */
#define SC16IS7XX_SPI_READ_BIT BIT(7)
static int sc16is7xx_spi_probe(struct spi_device *spi)
{
const struct sc16is7xx_devtype *devtype;
struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
unsigned int i;
int ret;
/* Setup SPI bus */
spi->bits_per_word = 8;
/* For all variants, only mode 0 is supported */
if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;
devtype = spi_get_device_match_data(spi);
if (!devtype)
return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n");
for (i = 0; i < devtype->nr_uart; i++) {
sc16is7xx_regcfg.name = sc16is7xx_regmap_name(i);
/*
* If read_flag_mask is 0, the regmap code sets it to a default
* of 0x80. Since we specify our own mask, we must add the READ
* bit ourselves:
*/
sc16is7xx_regcfg.read_flag_mask = sc16is7xx_regmap_port_mask(i) |
SC16IS7XX_SPI_READ_BIT;
sc16is7xx_regcfg.write_flag_mask = sc16is7xx_regmap_port_mask(i);
regmaps[i] = devm_regmap_init_spi(spi, &sc16is7xx_regcfg);
}
return sc16is7xx_probe(&spi->dev, devtype, regmaps, spi->irq);
}
static void sc16is7xx_spi_remove(struct spi_device *spi)
{
sc16is7xx_remove(&spi->dev);
}
static const struct spi_device_id sc16is7xx_spi_id_table[] = {
{ "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
{ "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
{ }
};
MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
static struct spi_driver sc16is7xx_spi_driver = {
.driver = {
.name = SC16IS7XX_NAME,
.of_match_table = sc16is7xx_dt_ids,
},
.probe = sc16is7xx_spi_probe,
.remove = sc16is7xx_spi_remove,
.id_table = sc16is7xx_spi_id_table,
};
module_spi_driver(sc16is7xx_spi_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SC16IS7xx SPI interface driver");
MODULE_IMPORT_NS(SERIAL_NXP_SC16IS7XX);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7