Commit d4b6f156 authored by Huacai Chen's avatar Huacai Chen

LoongArch: Add Non-Uniform Memory Access (NUMA) support

Add Non-Uniform Memory Access (NUMA) support for LoongArch. LoongArch
has 48-bit physical address, but the HyperTransport I/O bus only support
40-bit address, so we need a custom phys_to_dma() and dma_to_phys() to
extract the 4-bit node id (bit 44~47) from Loongson-3's 48-bit physical
address space and embed it into 40-bit. In the 40-bit dma address, node
id offset can be read from the LS7A_DMA_CFG register.
Reviewed-by: default avatarWANG Xuerui <git@xen0n.name>
Reviewed-by: default avatarJiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: default avatarHuacai Chen <chenhuacai@loongson.cn>
parent 46859ac8
......@@ -7,6 +7,7 @@ config LOONGARCH
select ARCH_ENABLE_MEMORY_HOTPLUG
select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_PHYS_TO_DMA
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_INLINE_READ_LOCK if !PREEMPTION
......@@ -41,6 +42,7 @@ config LOONGARCH
select ARCH_SUPPORTS_ACPI
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_HUGETLBFS
select ARCH_SUPPORTS_NUMA_BALANCING
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_USE_QUEUED_RWLOCKS
......@@ -91,12 +93,15 @@ config LOONGARCH
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
select HAVE_SETUP_PER_CPU_AREA if NUMA
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_TIF_NOHZ
select HAVE_VIRT_CPU_ACCOUNTING_GEN if !SMP
select IRQ_FORCED_THREADING
select IRQ_LOONGARCH_CPU
select MODULES_USE_ELF_RELA if MODULES
select NEED_PER_CPU_EMBED_FIRST_CHUNK
select NEED_PER_CPU_PAGE_FIRST_CHUNK
select OF
select OF_EARLY_FLATTREE
select PERF_USE_VMALLOC
......@@ -105,6 +110,7 @@ config LOONGARCH
select SYSCTL_EXCEPTION_TRACE
select SWIOTLB
select TRACE_IRQFLAGS_SUPPORT
select USE_PERCPU_NUMA_NODE_ID
select ZONE_DMA32
config 32BIT
......@@ -335,6 +341,20 @@ config NR_CPUS
This allows you to specify the maximum number of CPUs which this
kernel will support.
config NUMA
bool "NUMA Support"
select ACPI_NUMA if ACPI
help
Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
support. This option improves performance on systems with more
than one NUMA node; on single node systems it is generally better
to leave it disabled.
config NODES_SHIFT
int
default "6"
depends on NUMA
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
range 14 64 if PAGE_SIZE_64KB
......@@ -381,6 +401,7 @@ config ARCH_SELECT_MEMORY_MODEL
config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
config ARCH_SPARSEMEM_ENABLE
def_bool y
......
......@@ -13,6 +13,8 @@ const char *get_system_type(void);
extern void init_environ(void);
extern void memblock_init(void);
extern void platform_init(void);
extern void plat_swiotlb_setup(void);
extern int __init init_numa_memory(void);
struct loongson_board_info {
int bios_size;
......
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#ifndef _LOONGARCH_DMA_DIRECT_H
#define _LOONGARCH_DMA_DIRECT_H
dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
#endif /* _LOONGARCH_DMA_DIRECT_H */
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Author: Huacai Chen (chenhuacai@loongson.cn)
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#ifndef _ASM_MMZONE_H_
#define _ASM_MMZONE_H_
#include <asm/page.h>
#include <asm/numa.h>
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[(nid)])
extern void setup_zero_pages(void);
#endif /* _ASM_MMZONE_H_ */
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Author: Jianmin Lv <lvjianmin@loongson.cn>
* Huacai Chen <chenhuacai@loongson.cn>
*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#ifndef _ASM_LOONGARCH_NUMA_H
#define _ASM_LOONGARCH_NUMA_H
#include <linux/nodemask.h>
#define NODE_ADDRSPACE_SHIFT 44
#define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
#define nid_to_addrbase(nid) (_ULCAST_(nid) << NODE_ADDRSPACE_SHIFT)
#ifdef CONFIG_NUMA
extern int numa_off;
extern s16 __cpuid_to_node[CONFIG_NR_CPUS];
extern nodemask_t numa_nodes_parsed __initdata;
struct numa_memblk {
u64 start;
u64 end;
int nid;
};
#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
struct numa_meminfo {
int nr_blks;
struct numa_memblk blk[NR_NODE_MEMBLKS];
};
extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
extern void __init early_numa_add_cpu(int cpuid, s16 node);
extern void numa_add_cpu(unsigned int cpu);
extern void numa_remove_cpu(unsigned int cpu);
static inline void numa_clear_node(int cpu)
{
}
static inline void set_cpuid_to_node(int cpuid, s16 node)
{
__cpuid_to_node[cpuid] = node;
}
extern int early_cpu_to_node(int cpu);
#else
static inline void early_numa_add_cpu(int cpuid, s16 node) { }
static inline void numa_add_cpu(unsigned int cpu) { }
static inline void numa_remove_cpu(unsigned int cpu) { }
static inline int early_cpu_to_node(int cpu)
{
return 0;
}
#endif /* CONFIG_NUMA */
#endif /* _ASM_LOONGARCH_NUMA_H */
......@@ -541,6 +541,18 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#ifdef CONFIG_NUMA_BALANCING
static inline long pte_protnone(pte_t pte)
{
return (pte_val(pte) & _PAGE_PROTNONE);
}
static inline long pmd_protnone(pmd_t pmd)
{
return (pmd_val(pmd) & _PAGE_PROTNONE);
}
#endif /* CONFIG_NUMA_BALANCING */
/*
* We provide our own get_unmapped area to cope with the virtual aliasing
* constraints placed on us by the cache architecture.
......
......@@ -7,6 +7,27 @@
#include <linux/smp.h>
#ifdef CONFIG_NUMA
extern cpumask_t cpus_on_node[];
#define cpumask_of_node(node) (&cpus_on_node[node])
struct pci_bus;
extern int pcibus_to_node(struct pci_bus *);
#define cpumask_of_pcibus(bus) (cpu_online_mask)
extern unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
void numa_set_distance(int from, int to, int distance);
#define node_distance(from, to) (node_distances[(from)][(to)])
#else
#define pcibus_to_node(bus) 0
#endif
#ifdef CONFIG_SMP
#define topology_physical_package_id(cpu) (cpu_data[cpu].package)
#define topology_core_id(cpu) (cpu_data[cpu].core)
......
......@@ -20,4 +20,6 @@ obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_NUMA) += numa.o
CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
......@@ -14,6 +14,7 @@
#include <linux/memblock.h>
#include <linux/serial_core.h>
#include <asm/io.h>
#include <asm/numa.h>
#include <asm/loongson.h>
int acpi_disabled;
......@@ -199,6 +200,79 @@ int __init acpi_boot_init(void)
return 0;
}
#ifdef CONFIG_ACPI_NUMA
static __init int setup_node(int pxm)
{
return acpi_map_pxm_to_node(pxm);
}
/*
* Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for
* I/O localities since SRAT does not list them. I/O localities are
* not supported at this point.
*/
unsigned int numa_distance_cnt;
static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit)
{
return slit->locality_count;
}
void __init numa_set_distance(int from, int to, int distance)
{
if ((u8)distance != distance || (from == to && distance != LOCAL_DISTANCE)) {
pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
node_distances[from][to] = distance;
}
/* Callback for Proximity Domain -> CPUID mapping */
void __init
acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
{
int pxm, node;
if (srat_disabled())
return;
if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
bad_srat();
return;
}
if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
return;
pxm = pa->proximity_domain_lo;
if (acpi_srat_revision >= 2) {
pxm |= (pa->proximity_domain_hi[0] << 8);
pxm |= (pa->proximity_domain_hi[1] << 16);
pxm |= (pa->proximity_domain_hi[2] << 24);
}
node = setup_node(pxm);
if (node < 0) {
pr_err("SRAT: Too many proximity domains %x\n", pxm);
bad_srat();
return;
}
if (pa->apic_id >= CONFIG_NR_CPUS) {
pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u skipped apicid that is too big\n",
pxm, pa->apic_id, node);
return;
}
early_numa_add_cpu(pa->apic_id, node);
set_cpuid_to_node(pa->apic_id, node);
node_set(node, numa_nodes_parsed);
pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u\n", pxm, pa->apic_id, node);
}
void __init acpi_numa_arch_fixup(void) {}
#endif
void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
{
memblock_reserve(addr, size);
......@@ -208,6 +282,22 @@ void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
#include <acpi/processor.h>
static int __ref acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
{
#ifdef CONFIG_ACPI_NUMA
int nid;
nid = acpi_get_node(handle);
if (nid != NUMA_NO_NODE) {
set_cpuid_to_node(physid, nid);
node_set(nid, numa_nodes_parsed);
set_cpu_numa_node(cpu, nid);
cpumask_set_cpu(cpu, cpumask_of_node(nid));
}
#endif
return 0;
}
int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu)
{
int cpu;
......@@ -218,6 +308,8 @@ int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu
return cpu;
}
acpi_map_cpu2node(handle, cpu, physid);
*pcpu = cpu;
return 0;
......@@ -226,6 +318,9 @@ EXPORT_SYMBOL(acpi_map_cpu);
int acpi_unmap_cpu(int cpu)
{
#ifdef CONFIG_ACPI_NUMA
set_cpuid_to_node(cpu_logical_map(cpu), NUMA_NO_NODE);
#endif
set_cpu_present(cpu, false);
num_processors--;
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#include <linux/init.h>
#include <linux/dma-direct.h>
#include <linux/dma-mapping.h>
#include <linux/dma-map-ops.h>
#include <linux/swiotlb.h>
#include <asm/bootinfo.h>
#include <asm/dma.h>
#include <asm/loongson.h>
/*
* We extract 4bit node id (bit 44~47) from Loongson-3's
* 48bit physical address space and embed it into 40bit.
*/
static int node_id_offset;
dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
long nid = (paddr >> 44) & 0xf;
return ((nid << 44) ^ paddr) | (nid << node_id_offset);
}
phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
long nid = (daddr >> node_id_offset) & 0xf;
return ((nid << node_id_offset) ^ daddr) | (nid << 44);
}
void __init plat_swiotlb_setup(void)
{
swiotlb_init(true, SWIOTLB_VERBOSE);
node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF) + 36;
}
......@@ -11,6 +11,7 @@
#include <linux/moduleloader.h>
#include <linux/elf.h>
#include <linux/mm.h>
#include <linux/numa.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/fs.h>
......
// SPDX-License-Identifier: GPL-2.0
/*
* Author: Xiang Gao <gaoxiang@loongson.cn>
* Huacai Chen <chenhuacai@loongson.cn>
*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/export.h>
#include <linux/nodemask.h>
#include <linux/swap.h>
#include <linux/memblock.h>
#include <linux/pfn.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <asm/bootinfo.h>
#include <asm/loongson.h>
#include <asm/numa.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/time.h>
int numa_off;
struct pglist_data *node_data[MAX_NUMNODES];
unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
EXPORT_SYMBOL(node_data);
EXPORT_SYMBOL(node_distances);
static struct numa_meminfo numa_meminfo;
cpumask_t cpus_on_node[MAX_NUMNODES];
cpumask_t phys_cpus_on_node[MAX_NUMNODES];
EXPORT_SYMBOL(cpus_on_node);
/*
* apicid, cpu, node mappings
*/
s16 __cpuid_to_node[CONFIG_NR_CPUS] = {
[0 ... CONFIG_NR_CPUS - 1] = NUMA_NO_NODE
};
EXPORT_SYMBOL(__cpuid_to_node);
nodemask_t numa_nodes_parsed __initdata;
#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);
static int __init pcpu_cpu_to_node(int cpu)
{
return early_cpu_to_node(cpu);
}
static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
{
if (early_cpu_to_node(from) == early_cpu_to_node(to))
return LOCAL_DISTANCE;
else
return REMOTE_DISTANCE;
}
void __init pcpu_populate_pte(unsigned long addr)
{
pgd_t *pgd = pgd_offset_k(addr);
p4d_t *p4d = p4d_offset(pgd, addr);
pud_t *pud;
pmd_t *pmd;
if (p4d_none(*p4d)) {
pud_t *new;
new = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
pgd_populate(&init_mm, pgd, new);
#ifndef __PAGETABLE_PUD_FOLDED
pud_init((unsigned long)new, (unsigned long)invalid_pmd_table);
#endif
}
pud = pud_offset(p4d, addr);
if (pud_none(*pud)) {
pmd_t *new;
new = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
pud_populate(&init_mm, pud, new);
#ifndef __PAGETABLE_PMD_FOLDED
pmd_init((unsigned long)new, (unsigned long)invalid_pte_table);
#endif
}
pmd = pmd_offset(pud, addr);
if (!pmd_present(*pmd)) {
pte_t *new;
new = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
pmd_populate_kernel(&init_mm, pmd, new);
}
}
void __init setup_per_cpu_areas(void)
{
unsigned long delta;
unsigned int cpu;
int rc = -EINVAL;
if (pcpu_chosen_fc == PCPU_FC_AUTO) {
if (nr_node_ids >= 8)
pcpu_chosen_fc = PCPU_FC_PAGE;
else
pcpu_chosen_fc = PCPU_FC_EMBED;
}
/*
* Always reserve area for module percpu variables. That's
* what the legacy allocator did.
*/
if (pcpu_chosen_fc != PCPU_FC_PAGE) {
rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
PERCPU_DYNAMIC_RESERVE, PMD_SIZE,
pcpu_cpu_distance, pcpu_cpu_to_node);
if (rc < 0)
pr_warn("%s allocator failed (%d), falling back to page size\n",
pcpu_fc_names[pcpu_chosen_fc], rc);
}
if (rc < 0)
rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_cpu_to_node);
if (rc < 0)
panic("cannot initialize percpu area (err=%d)", rc);
delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
for_each_possible_cpu(cpu)
__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
}
#endif
/*
* Get nodeid by logical cpu number.
* __cpuid_to_node maps phyical cpu id to node, so we
* should use cpu_logical_map(cpu) to index it.
*
* This routine is only used in early phase during
* booting, after setup_per_cpu_areas calling and numa_node
* initialization, cpu_to_node will be used instead.
*/
int early_cpu_to_node(int cpu)
{
int physid = cpu_logical_map(cpu);
if (physid < 0)
return NUMA_NO_NODE;
return __cpuid_to_node[physid];
}
void __init early_numa_add_cpu(int cpuid, s16 node)
{
int cpu = __cpu_number_map[cpuid];
if (cpu < 0)
return;
cpumask_set_cpu(cpu, &cpus_on_node[node]);
cpumask_set_cpu(cpuid, &phys_cpus_on_node[node]);
}
void numa_add_cpu(unsigned int cpu)
{
int nid = cpu_to_node(cpu);
cpumask_set_cpu(cpu, &cpus_on_node[nid]);
}
void numa_remove_cpu(unsigned int cpu)
{
int nid = cpu_to_node(cpu);
cpumask_clear_cpu(cpu, &cpus_on_node[nid]);
}
static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
struct numa_meminfo *mi)
{
/* ignore zero length blks */
if (start == end)
return 0;
/* whine about and ignore invalid blks */
if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
nid, start, end - 1);
return 0;
}
if (mi->nr_blks >= NR_NODE_MEMBLKS) {
pr_err("NUMA: too many memblk ranges\n");
return -EINVAL;
}
mi->blk[mi->nr_blks].start = PFN_ALIGN(start);
mi->blk[mi->nr_blks].end = PFN_ALIGN(end - PAGE_SIZE + 1);
mi->blk[mi->nr_blks].nid = nid;
mi->nr_blks++;
return 0;
}
/**
* numa_add_memblk - Add one numa_memblk to numa_meminfo
* @nid: NUMA node ID of the new memblk
* @start: Start address of the new memblk
* @end: End address of the new memblk
*
* Add a new memblk to the default numa_meminfo.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_add_memblk(int nid, u64 start, u64 end)
{
return numa_add_memblk_to(nid, start, end, &numa_meminfo);
}
static void __init alloc_node_data(int nid)
{
void *nd;
unsigned long nd_pa;
size_t nd_sz = roundup(sizeof(pg_data_t), PAGE_SIZE);
nd_pa = memblock_phys_alloc_try_nid(nd_sz, SMP_CACHE_BYTES, nid);
if (!nd_pa) {
pr_err("Cannot find %zu Byte for node_data (initial node: %d)\n", nd_sz, nid);
return;
}
nd = __va(nd_pa);
node_data[nid] = nd;
memset(nd, 0, sizeof(pg_data_t));
}
static void __init node_mem_init(unsigned int node)
{
unsigned long start_pfn, end_pfn;
unsigned long node_addrspace_offset;
node_addrspace_offset = nid_to_addrbase(node);
pr_info("Node%d's addrspace_offset is 0x%lx\n",
node, node_addrspace_offset);
get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx\n",
node, start_pfn, end_pfn);
alloc_node_data(node);
}
#ifdef CONFIG_ACPI_NUMA
/*
* Sanity check to catch more bad NUMA configurations (they are amazingly
* common). Make sure the nodes cover all memory.
*/
static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
{
int i;
u64 numaram, biosram;
numaram = 0;
for (i = 0; i < mi->nr_blks; i++) {
u64 s = mi->blk[i].start >> PAGE_SHIFT;
u64 e = mi->blk[i].end >> PAGE_SHIFT;
numaram += e - s;
numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
if ((s64)numaram < 0)
numaram = 0;
}
max_pfn = max_low_pfn;
biosram = max_pfn - absent_pages_in_range(0, max_pfn);
BUG_ON((s64)(biosram - numaram) >= (1 << (20 - PAGE_SHIFT)));
return true;
}
static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type)
{
static unsigned long num_physpages;
num_physpages += (size >> PAGE_SHIFT);
pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
node, type, start, size);
pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
start >> PAGE_SHIFT, (start + size) >> PAGE_SHIFT, num_physpages);
memblock_set_node(start, size, &memblock.memory, node);
}
/*
* add_numamem_region
*
* Add a uasable memory region described by BIOS. The
* routine gets each intersection between BIOS's region
* and node's region, and adds them into node's memblock
* pool.
*
*/
static void __init add_numamem_region(u64 start, u64 end, u32 type)
{
u32 i;
u64 ofs = start;
if (start >= end) {
pr_debug("Invalid region: %016llx-%016llx\n", start, end);
return;
}
for (i = 0; i < numa_meminfo.nr_blks; i++) {
struct numa_memblk *mb = &numa_meminfo.blk[i];
if (ofs > mb->end)
continue;
if (end > mb->end) {
add_node_intersection(mb->nid, ofs, mb->end - ofs, type);
ofs = mb->end;
} else {
add_node_intersection(mb->nid, ofs, end - ofs, type);
break;
}
}
}
static void __init init_node_memblock(void)
{
u32 mem_type;
u64 mem_end, mem_start, mem_size;
efi_memory_desc_t *md;
/* Parse memory information and activate */
for_each_efi_memory_desc(md) {
mem_type = md->type;
mem_start = md->phys_addr;
mem_size = md->num_pages << EFI_PAGE_SHIFT;
mem_end = mem_start + mem_size;
switch (mem_type) {
case EFI_LOADER_CODE:
case EFI_LOADER_DATA:
case EFI_BOOT_SERVICES_CODE:
case EFI_BOOT_SERVICES_DATA:
case EFI_PERSISTENT_MEMORY:
case EFI_CONVENTIONAL_MEMORY:
add_numamem_region(mem_start, mem_end, mem_type);
break;
case EFI_PAL_CODE:
case EFI_UNUSABLE_MEMORY:
case EFI_ACPI_RECLAIM_MEMORY:
add_numamem_region(mem_start, mem_end, mem_type);
fallthrough;
case EFI_RESERVED_TYPE:
case EFI_RUNTIME_SERVICES_CODE:
case EFI_RUNTIME_SERVICES_DATA:
case EFI_MEMORY_MAPPED_IO:
case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
pr_info("Resvd: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
mem_type, mem_start, mem_size);
break;
}
}
}
static void __init numa_default_distance(void)
{
int row, col;
for (row = 0; row < MAX_NUMNODES; row++)
for (col = 0; col < MAX_NUMNODES; col++) {
if (col == row)
node_distances[row][col] = LOCAL_DISTANCE;
else
/* We assume that one node per package here!
*
* A SLIT should be used for multiple nodes
* per package to override default setting.
*/
node_distances[row][col] = REMOTE_DISTANCE;
}
}
int __init init_numa_memory(void)
{
int i;
int ret;
int node;
for (i = 0; i < NR_CPUS; i++)
set_cpuid_to_node(i, NUMA_NO_NODE);
numa_default_distance();
nodes_clear(numa_nodes_parsed);
nodes_clear(node_possible_map);
nodes_clear(node_online_map);
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
/* Parse SRAT and SLIT if provided by firmware. */
ret = acpi_numa_init();
if (ret < 0)
return ret;
node_possible_map = numa_nodes_parsed;
if (WARN_ON(nodes_empty(node_possible_map)))
return -EINVAL;
init_node_memblock();
if (numa_meminfo_cover_memory(&numa_meminfo) == false)
return -EINVAL;
for_each_node_mask(node, node_possible_map) {
node_mem_init(node);
node_set_online(node);
}
max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
setup_nr_node_ids();
loongson_sysconf.nr_nodes = nr_node_ids;
loongson_sysconf.cores_per_node = cpumask_weight(&phys_cpus_on_node[0]);
return 0;
}
EXPORT_SYMBOL(init_numa_memory);
#endif
void __init paging_init(void)
{
unsigned int node;
unsigned long zones_size[MAX_NR_ZONES] = {0, };
for_each_online_node(node) {
unsigned long start_pfn, end_pfn;
get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
}
#ifdef CONFIG_ZONE_DMA32
zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
#endif
zones_size[ZONE_NORMAL] = max_low_pfn;
free_area_init(zones_size);
}
void __init mem_init(void)
{
high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
memblock_free_all();
setup_zero_pages(); /* This comes from node 0 */
}
int pcibus_to_node(struct pci_bus *bus)
{
return dev_to_node(&bus->dev);
}
EXPORT_SYMBOL(pcibus_to_node);
......@@ -35,6 +35,7 @@
#include <asm/dma.h>
#include <asm/efi.h>
#include <asm/loongson.h>
#include <asm/numa.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/setup.h>
......@@ -185,7 +186,10 @@ static int __init early_parse_mem(char *p)
return -EINVAL;
}
if (!IS_ENABLED(CONFIG_NUMA))
memblock_add(start, size);
else
memblock_add_node(start, size, pa_to_nid(start), MEMBLOCK_NONE);
return 0;
}
......@@ -203,6 +207,9 @@ void __init platform_init(void)
acpi_boot_init();
#endif
#ifdef CONFIG_NUMA
init_numa_memory();
#endif
dmi_setup();
smbios_parse();
pr_info("The BIOS Version: %s\n", b_info.bios_version);
......@@ -241,7 +248,7 @@ static void __init arch_mem_init(char **cmdline_p)
sparse_init();
memblock_set_bottom_up(true);
swiotlb_init(true, SWIOTLB_VERBOSE);
plat_swiotlb_setup();
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
......
......@@ -25,6 +25,7 @@
#include <asm/idle.h>
#include <asm/loongson.h>
#include <asm/mmu_context.h>
#include <asm/numa.h>
#include <asm/processor.h>
#include <asm/setup.h>
#include <asm/time.h>
......@@ -222,6 +223,9 @@ void loongson3_init_secondary(void)
iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_EN);
#ifdef CONFIG_NUMA
numa_add_cpu(cpu);
#endif
per_cpu(cpu_state, cpu) = CPU_ONLINE;
cpu_data[cpu].core =
cpu_logical_map(cpu) % loongson_sysconf.cores_per_package;
......@@ -254,6 +258,9 @@ int loongson3_cpu_disable(void)
if (io_master(cpu))
return -EBUSY;
#ifdef CONFIG_NUMA
numa_remove_cpu(cpu);
#endif
set_cpu_online(cpu, false);
calculate_cpu_foreign_map();
local_irq_save(flags);
......@@ -478,14 +485,36 @@ void calculate_cpu_foreign_map(void)
/* Preload SMP state for boot cpu */
void smp_prepare_boot_cpu(void)
{
unsigned int cpu;
unsigned int cpu, node, rr_node;
set_cpu_possible(0, true);
set_cpu_online(0, true);
set_my_cpu_offset(per_cpu_offset(0));
for_each_possible_cpu(cpu)
set_cpu_numa_node(cpu, 0);
rr_node = first_node(node_online_map);
for_each_possible_cpu(cpu) {
node = early_cpu_to_node(cpu);
/*
* The mapping between present cpus and nodes has been
* built during MADT and SRAT parsing.
*
* If possible cpus = present cpus here, early_cpu_to_node
* will return valid node.
*
* If possible cpus > present cpus here (e.g. some possible
* cpus will be added by cpu-hotplug later), for possible but
* not present cpus, early_cpu_to_node will return NUMA_NO_NODE,
* and we just map them to online nodes in round-robin way.
* Once hotplugged, new correct mapping will be built for them.
*/
if (node != NUMA_NO_NODE)
set_cpu_numa_node(cpu, node);
else {
set_cpu_numa_node(cpu, rr_node);
rr_node = next_node_in(rr_node, node_online_map);
}
}
}
/* called from main before smp_init() */
......@@ -651,17 +680,10 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned l
on_each_cpu_mask(mm_cpumask(mm), flush_tlb_range_ipi, &fd, 1);
} else {
unsigned int cpu;
int exec = vma->vm_flags & VM_EXEC;
for_each_online_cpu(cpu) {
/*
* flush_cache_range() will only fully flush icache if
* the VMA is executable, otherwise we must invalidate
* ASID without it appearing to has_valid_asid() as if
* mm has been completely unused by that CPU.
*/
if (cpu != smp_processor_id() && cpu_context(cpu, mm))
cpu_context(cpu, mm) = !exec;
cpu_context(cpu, mm) = 0;
}
local_flush_tlb_range(vma, start, end);
}
......@@ -706,14 +728,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
unsigned int cpu;
for_each_online_cpu(cpu) {
/*
* flush_cache_page() only does partial flushes, so
* invalidate ASID without it appearing to
* has_valid_asid() as if mm has been completely unused
* by that CPU.
*/
if (cpu != smp_processor_id() && cpu_context(cpu, vma->vm_mm))
cpu_context(cpu, vma->vm_mm) = 1;
cpu_context(cpu, vma->vm_mm) = 0;
}
local_flush_tlb_page(vma, page);
}
......
......@@ -630,7 +630,7 @@ asmlinkage void noinstr do_vint(struct pt_regs *regs, unsigned long sp)
irqentry_exit(regs, state);
}
extern void tlb_init(void);
extern void tlb_init(int cpu);
extern void cache_error_setup(void);
unsigned long eentry;
......@@ -669,7 +669,7 @@ void per_cpu_trap_init(int cpu)
for (i = 0; i < 64; i++)
set_handler(i * VECSIZE, handle_reserved, VECSIZE);
tlb_init();
tlb_init(cpu);
cpu_cache_init();
}
......
......@@ -84,6 +84,7 @@ int __ref page_is_ram(unsigned long pfn)
return memblock_is_memory(addr) && !memblock_is_reserved(addr);
}
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
......@@ -107,6 +108,7 @@ void __init mem_init(void)
memblock_free_all();
setup_zero_pages(); /* Setup zeroed pages. */
}
#endif /* !CONFIG_NUMA */
void __ref free_initmem(void)
{
......@@ -129,6 +131,17 @@ int arch_add_memory(int nid, u64 start, u64 size, struct mhp_params *params)
return ret;
}
#ifdef CONFIG_NUMA
int memory_add_physaddr_to_nid(u64 start)
{
int nid;
nid = pa_to_nid(start);
return nid;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
#ifdef CONFIG_MEMORY_HOTREMOVE
void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
{
......
......@@ -250,15 +250,18 @@ static void output_pgtable_bits_defines(void)
pr_debug("\n");
}
void setup_tlb_handler(void)
{
static int run_once = 0;
#ifdef CONFIG_NUMA
static unsigned long pcpu_handlers[NR_CPUS];
#endif
extern long exception_handlers[VECSIZE * 128 / sizeof(long)];
void setup_tlb_handler(int cpu)
{
setup_ptwalker();
output_pgtable_bits_defines();
/* The tlb handlers are generated only once */
if (!run_once) {
if (cpu == 0) {
memcpy((void *)tlbrentry, handle_tlb_refill, 0x80);
local_flush_icache_range(tlbrentry, tlbrentry + 0x80);
set_handler(EXCCODE_TLBI * VECSIZE, handle_tlb_load, VECSIZE);
......@@ -268,15 +271,35 @@ void setup_tlb_handler(void)
set_handler(EXCCODE_TLBNR * VECSIZE, handle_tlb_protect, VECSIZE);
set_handler(EXCCODE_TLBNX * VECSIZE, handle_tlb_protect, VECSIZE);
set_handler(EXCCODE_TLBPE * VECSIZE, handle_tlb_protect, VECSIZE);
run_once++;
}
#ifdef CONFIG_NUMA
else {
void *addr;
struct page *page;
const int vec_sz = sizeof(exception_handlers);
if (pcpu_handlers[cpu])
return;
page = alloc_pages_node(cpu_to_node(cpu), GFP_KERNEL, get_order(vec_sz));
if (!page)
return;
addr = page_address(page);
pcpu_handlers[cpu] = virt_to_phys(addr);
memcpy((void *)addr, (void *)eentry, vec_sz);
local_flush_icache_range((unsigned long)addr, (unsigned long)addr + vec_sz);
csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_TLBRENTRY);
csr_write64(pcpu_handlers[cpu] + 80*VECSIZE, LOONGARCH_CSR_TLBRENTRY);
}
#endif
}
void tlb_init(void)
void tlb_init(int cpu)
{
write_csr_pagesize(PS_DEFAULT_SIZE);
write_csr_stlbpgsize(PS_DEFAULT_SIZE);
write_csr_tlbrefill_pagesize(PS_DEFAULT_SIZE);
setup_tlb_handler();
setup_tlb_handler(cpu);
local_flush_tlb_all();
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment