drivers/net: Use octal not symbolic permissions

Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bonding/bond_procfs.c

@@ -287,7 +287,7 @@ void bond_create_proc_entry(struct bonding *bond)
 
 	if (bn->proc_dir) {
 		bond->proc_entry = proc_create_data(bond_dev->name,
-						    S_IRUGO, bn->proc_dir,
+						    0444, bn->proc_dir,
 						    &bond_info_fops, bond);
 		if (bond->proc_entry == NULL)
 			netdev_warn(bond_dev, "Cannot create /proc/net/%s/%s\n",

drivers/net/bonding/bond_sysfs_slave.c

@@ -26,7 +26,7 @@ const struct slave_attribute slave_attr_##_name = {		\
 	.show	= _show,					\
 };
 #define SLAVE_ATTR_RO(_name)					\
-	SLAVE_ATTR(_name, S_IRUGO, _name##_show)
+	SLAVE_ATTR(_name, 0444, _name##_show)
 
 static ssize_t state_show(struct slave *slave, char *buf)
 {

drivers/net/caif/caif_serial.c

@@ -40,20 +40,20 @@ static LIST_HEAD(ser_list);
 static LIST_HEAD(ser_release_list);
 
 static bool ser_loop;
-module_param(ser_loop, bool, S_IRUGO);
+module_param(ser_loop, bool, 0444);
 MODULE_PARM_DESC(ser_loop, "Run in simulated loopback mode.");
 
 static bool ser_use_stx = true;
-module_param(ser_use_stx, bool, S_IRUGO);
+module_param(ser_use_stx, bool, 0444);
 MODULE_PARM_DESC(ser_use_stx, "STX enabled or not.");
 
 static bool ser_use_fcs = true;
 
-module_param(ser_use_fcs, bool, S_IRUGO);
+module_param(ser_use_fcs, bool, 0444);
 MODULE_PARM_DESC(ser_use_fcs, "FCS enabled or not.");
 
 static int ser_write_chunk = MAX_WRITE_CHUNK;
-module_param(ser_write_chunk, int, S_IRUGO);
+module_param(ser_write_chunk, int, 0444);
 
 MODULE_PARM_DESC(ser_write_chunk, "Maximum size of data written to UART.");
 
@@ -97,19 +97,19 @@ static inline void debugfs_init(struct ser_device *ser, struct tty_struct *tty)
 	ser->debugfs_tty_dir =
 			debugfs_create_dir(tty->name, debugfsdir);
 	if (!IS_ERR(ser->debugfs_tty_dir)) {
-		debugfs_create_blob("last_tx_msg", S_IRUSR,
+		debugfs_create_blob("last_tx_msg", 0400,
 				    ser->debugfs_tty_dir,
 				    &ser->tx_blob);
 
-		debugfs_create_blob("last_rx_msg", S_IRUSR,
+		debugfs_create_blob("last_rx_msg", 0400,
 				    ser->debugfs_tty_dir,
 				    &ser->rx_blob);
 
-		debugfs_create_x32("ser_state", S_IRUSR,
+		debugfs_create_x32("ser_state", 0400,
 				   ser->debugfs_tty_dir,
 				   (u32 *)&ser->state);
 
-		debugfs_create_x8("tty_status", S_IRUSR,
+		debugfs_create_x8("tty_status", 0400,
 				  ser->debugfs_tty_dir,
 				  &ser->tty_status);
 

drivers/net/caif/caif_spi.c

@@ -35,27 +35,27 @@ MODULE_DESCRIPTION("CAIF SPI driver");
 #define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
 
 static bool spi_loop;
-module_param(spi_loop, bool, S_IRUGO);
+module_param(spi_loop, bool, 0444);
 MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
 
 /* SPI frame alignment. */
-module_param(spi_frm_align, int, S_IRUGO);
+module_param(spi_frm_align, int, 0444);
 MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment.");
 
 /*
  * SPI padding options.
  * Warning: must be a base of 2 (& operation used) and can not be zero !
  */
-module_param(spi_up_head_align, int, S_IRUGO);
+module_param(spi_up_head_align, int, 0444);
 MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment.");
 
-module_param(spi_up_tail_align, int, S_IRUGO);
+module_param(spi_up_tail_align, int, 0444);
 MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment.");
 
-module_param(spi_down_head_align, int, S_IRUGO);
+module_param(spi_down_head_align, int, 0444);
 MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment.");
 
-module_param(spi_down_tail_align, int, S_IRUGO);
+module_param(spi_down_tail_align, int, 0444);
 MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment.");
 
 #ifdef CONFIG_ARM
@@ -250,10 +250,10 @@ static const struct file_operations dbgfs_frame_fops = {
 static inline void dev_debugfs_add(struct cfspi *cfspi)
 {
 	cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root);
-	cfspi->dbgfs_state = debugfs_create_file("state", S_IRUGO,
+	cfspi->dbgfs_state = debugfs_create_file("state", 0444,
 						 cfspi->dbgfs_dir, cfspi,
 						 &dbgfs_state_fops);
-	cfspi->dbgfs_frame = debugfs_create_file("frame", S_IRUGO,
+	cfspi->dbgfs_frame = debugfs_create_file("frame", 0444,
 						 cfspi->dbgfs_dir, cfspi,
 						 &dbgfs_frame_fops);
 }

drivers/net/caif/caif_virtio.c

@@ -629,21 +629,21 @@ static inline void debugfs_init(struct cfv_info *cfv)
 	if (IS_ERR(cfv->debugfs))
 		return;
 
-	debugfs_create_u32("rx-napi-complete", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("rx-napi-complete", 0400, cfv->debugfs,
 			   &cfv->stats.rx_napi_complete);
-	debugfs_create_u32("rx-napi-resched", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("rx-napi-resched", 0400, cfv->debugfs,
 			   &cfv->stats.rx_napi_resched);
-	debugfs_create_u32("rx-nomem", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("rx-nomem", 0400, cfv->debugfs,
 			   &cfv->stats.rx_nomem);
-	debugfs_create_u32("rx-kicks", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("rx-kicks", 0400, cfv->debugfs,
 			   &cfv->stats.rx_kicks);
-	debugfs_create_u32("tx-full-ring", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("tx-full-ring", 0400, cfv->debugfs,
 			   &cfv->stats.tx_full_ring);
-	debugfs_create_u32("tx-no-mem", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("tx-no-mem", 0400, cfv->debugfs,
 			   &cfv->stats.tx_no_mem);
-	debugfs_create_u32("tx-kicks", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("tx-kicks", 0400, cfv->debugfs,
 			   &cfv->stats.tx_kicks);
-	debugfs_create_u32("tx-flow-on", S_IRUSR, cfv->debugfs,
+	debugfs_create_u32("tx-flow-on", 0400, cfv->debugfs,
 			   &cfv->stats.tx_flow_on);
 }
 

drivers/net/can/at91_can.c

@@ -1224,8 +1224,7 @@ static ssize_t at91_sysfs_set_mb0_id(struct device *dev,
 	return ret;
 }
 
-static DEVICE_ATTR(mb0_id, S_IWUSR | S_IRUGO,
-	at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id);
+static DEVICE_ATTR(mb0_id, 0644, at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id);
 
 static struct attribute *at91_sysfs_attrs[] = {
 	&dev_attr_mb0_id.attr,

drivers/net/can/cc770/cc770.c

@@ -67,12 +67,12 @@ MODULE_DESCRIPTION(KBUILD_MODNAME "CAN netdevice driver");
  * otherwise 11 bit SFF messages.
  */
 static int msgobj15_eff;
-module_param(msgobj15_eff, int, S_IRUGO);
+module_param(msgobj15_eff, int, 0444);
 MODULE_PARM_DESC(msgobj15_eff, "Extended 29-bit frames for message object 15 "
 		 "(default: 11-bit standard frames)");
 
 static int i82527_compat;
-module_param(i82527_compat, int, S_IRUGO);
+module_param(i82527_compat, int, 0444);
 MODULE_PARM_DESC(i82527_compat, "Strict Intel 82527 comptibility mode "
 		 "without using additional functions");
 

drivers/net/can/cc770/cc770_isa.c

@@ -82,29 +82,29 @@ static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
 
-module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, 0444);
 MODULE_PARM_DESC(port, "I/O port number");
 
-module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, 0444);
 MODULE_PARM_DESC(mem, "I/O memory address");
 
-module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, 0444);
 MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
 
-module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, 0444);
 MODULE_PARM_DESC(irq, "IRQ number");
 
-module_param_array(clk, int, NULL, S_IRUGO);
+module_param_array(clk, int, NULL, 0444);
 MODULE_PARM_DESC(clk, "External oscillator clock frequency "
 		 "(default=16000000 [16 MHz])");
 
-module_param_array(cir, byte, NULL, S_IRUGO);
+module_param_array(cir, byte, NULL, 0444);
 MODULE_PARM_DESC(cir, "CPU interface register (default=0x40 [DSC])");
 
-module_param_array(cor, byte, NULL, S_IRUGO);
+module_param_array(cor, byte, NULL, 0444);
 MODULE_PARM_DESC(cor, "Clockout register (default=0x00)");
 
-module_param_array(bcr, byte, NULL, S_IRUGO);
+module_param_array(bcr, byte, NULL, 0444);
 MODULE_PARM_DESC(bcr, "Bus configuration register (default=0x40 [CBY])");
 
 #define CC770_IOSIZE          0x20

drivers/net/can/grcan.c

@@ -1484,7 +1484,7 @@ static netdev_tx_t grcan_start_xmit(struct sk_buff *skb,
 		}							\
 	}								\
 	module_param_named(name, grcan_module_config.name,		\
-			   mtype, S_IRUGO);				\
+			   mtype, 0444);				\
 	MODULE_PARM_DESC(name, desc)
 
 #define GRCAN_CONFIG_ATTR(name, desc)					\
@@ -1513,7 +1513,7 @@ static netdev_tx_t grcan_start_xmit(struct sk_buff *skb,
 		struct grcan_priv *priv = netdev_priv(dev);		\
 		return sprintf(buf, "%d\n", priv->config.name);		\
 	}								\
-	static DEVICE_ATTR(name, S_IRUGO | S_IWUSR,			\
+	static DEVICE_ATTR(name, 0644,					\
 			   grcan_show_##name,				\
 			   grcan_store_##name);				\
 	GRCAN_MODULE_PARAM(name, ushort, GRCAN_NOT_BOOL, desc)

drivers/net/can/janz-ican3.c

@@ -1865,9 +1865,9 @@ static ssize_t ican3_sysfs_show_fwinfo(struct device *dev,
 	return scnprintf(buf, PAGE_SIZE, "%s\n", mod->fwinfo);
 }
 
-static DEVICE_ATTR(termination, S_IWUSR | S_IRUGO, ican3_sysfs_show_term,
+static DEVICE_ATTR(termination, 0644, ican3_sysfs_show_term,
 		   ican3_sysfs_set_term);
-static DEVICE_ATTR(fwinfo, S_IRUSR | S_IRUGO, ican3_sysfs_show_fwinfo, NULL);
+static DEVICE_ATTR(fwinfo, 0444, ican3_sysfs_show_fwinfo, NULL);
 
 static struct attribute *ican3_sysfs_attrs[] = {
 	&dev_attr_termination.attr,

drivers/net/can/sja1000/sja1000_isa.c

@@ -48,27 +48,27 @@ static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
 static spinlock_t indirect_lock[MAXDEV];  /* lock for indirect access mode */
 
-module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, 0444);
 MODULE_PARM_DESC(port, "I/O port number");
 
-module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, 0444);
 MODULE_PARM_DESC(mem, "I/O memory address");
 
-module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, 0444);
 MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
 
-module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, 0444);
 MODULE_PARM_DESC(irq, "IRQ number");
 
-module_param_array(clk, int, NULL, S_IRUGO);
+module_param_array(clk, int, NULL, 0444);
 MODULE_PARM_DESC(clk, "External oscillator clock frequency "
 		 "(default=16000000 [16 MHz])");
 
-module_param_array(cdr, byte, NULL, S_IRUGO);
+module_param_array(cdr, byte, NULL, 0444);
 MODULE_PARM_DESC(cdr, "Clock divider register "
 		 "(default=0x48 [CDR_CBP | CDR_CLK_OFF])");
 
-module_param_array(ocr, byte, NULL, S_IRUGO);
+module_param_array(ocr, byte, NULL, 0444);
 MODULE_PARM_DESC(ocr, "Output control register "
 		 "(default=0x18 [OCR_TX0_PUSHPULL])");
 

drivers/net/can/softing/softing_main.c

@@ -601,8 +601,8 @@ static ssize_t store_output(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static const DEVICE_ATTR(chip, S_IRUGO, show_chip, NULL);
-static const DEVICE_ATTR(output, S_IRUGO | S_IWUSR, show_output, store_output);
+static const DEVICE_ATTR(chip, 0444, show_chip, NULL);
+static const DEVICE_ATTR(output, 0644, show_output, store_output);
 
 static const struct attribute *const netdev_sysfs_attrs[] = {
 	&dev_attr_chip.attr,

drivers/net/can/spi/mcp251x.c

@@ -220,7 +220,7 @@
 #define DEVICE_NAME "mcp251x"
 
 static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
-module_param(mcp251x_enable_dma, int, S_IRUGO);
+module_param(mcp251x_enable_dma, int, 0444);
 MODULE_PARM_DESC(mcp251x_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
 
 static const struct can_bittiming_const mcp251x_bittiming_const = {

drivers/net/can/usb/esd_usb2.c

@@ -496,7 +496,7 @@ static ssize_t show_firmware(struct device *d,
 		       (dev->version >> 8) & 0xf,
 		       dev->version & 0xff);
 }
-static DEVICE_ATTR(firmware, S_IRUGO, show_firmware, NULL);
+static DEVICE_ATTR(firmware, 0444, show_firmware, NULL);
 
 static ssize_t show_hardware(struct device *d,
 			     struct device_attribute *attr, char *buf)
@@ -509,7 +509,7 @@ static ssize_t show_hardware(struct device *d,
 		       (dev->version >> 24) & 0xf,
 		       (dev->version >> 16) & 0xff);
 }
-static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
+static DEVICE_ATTR(hardware, 0444, show_hardware, NULL);
 
 static ssize_t show_nets(struct device *d,
 			 struct device_attribute *attr, char *buf)
@@ -519,7 +519,7 @@ static ssize_t show_nets(struct device *d,
 
 	return sprintf(buf, "%d", dev->net_count);
 }
-static DEVICE_ATTR(nets, S_IRUGO, show_nets, NULL);
+static DEVICE_ATTR(nets, 0444, show_nets, NULL);
 
 static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
 {

drivers/net/can/vcan.c

@@ -65,7 +65,7 @@ MODULE_ALIAS_RTNL_LINK(DRV_NAME);
  */
 
 static bool echo; /* echo testing. Default: 0 (Off) */
-module_param(echo, bool, S_IRUGO);
+module_param(echo, bool, 0444);
 MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
 
 

drivers/net/hamradio/bpqether.c

@@ -590,8 +590,7 @@ static int bpq_device_event(struct notifier_block *this,
 static int __init bpq_init_driver(void)
 {
 #ifdef CONFIG_PROC_FS
-	if (!proc_create("bpqether", S_IRUGO, init_net.proc_net,
-			 &bpq_info_fops)) {
+	if (!proc_create("bpqether", 0444, init_net.proc_net, &bpq_info_fops)) {
 		printk(KERN_ERR
 			"bpq: cannot create /proc/net/bpqether entry.\n");
 		return -ENOENT;

drivers/net/hamradio/yam.c

@@ -1168,7 +1168,7 @@ static int __init yam_init_driver(void)
 	yam_timer.expires = jiffies + HZ / 100;
 	add_timer(&yam_timer);
 
-	proc_create("yam", S_IRUGO, init_net.proc_net, &yam_info_fops);
+	proc_create("yam", 0444, init_net.proc_net, &yam_info_fops);
 	return 0;
  error:
 	while (--i >= 0) {

drivers/net/hyperv/netvsc_drv.c

@@ -55,7 +55,7 @@
 #define VF_TAKEOVER_INT (HZ / 10)
 
 static unsigned int ring_size __ro_after_init = 128;
-module_param(ring_size, uint, S_IRUGO);
+module_param(ring_size, uint, 0444);
 MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)");
 unsigned int netvsc_ring_bytes __ro_after_init;
 struct reciprocal_value netvsc_ring_reciprocal __ro_after_init;
@@ -66,7 +66,7 @@ static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
 				NETIF_MSG_TX_ERR;
 
 static int debug = -1;
-module_param(debug, int, S_IRUGO);
+module_param(debug, int, 0444);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
 static void netvsc_change_rx_flags(struct net_device *net, int change)

drivers/net/ieee802154/at86rf230.c

@@ -1661,7 +1661,7 @@ static int at86rf230_debugfs_init(struct at86rf230_local *lp)
 	if (!at86rf230_debugfs_root)
 		return -ENOMEM;
 
-	stats = debugfs_create_file("trac_stats", S_IRUGO,
+	stats = debugfs_create_file("trac_stats", 0444,
 				    at86rf230_debugfs_root, lp,
 				    &at86rf230_stats_fops);
 	if (!stats)

drivers/net/phy/spi_ks8995.c

@@ -417,7 +417,7 @@ static void ks8995_parse_dt(struct ks8995_switch *ks)
 static const struct bin_attribute ks8995_registers_attr = {
 	.attr = {
 		.name   = "registers",
-		.mode   = S_IRUSR | S_IWUSR,
+		.mode   = 0600,
 	},
 	.size   = KS8995_REGS_SIZE,
 	.read   = ks8995_registers_read,

drivers/net/ppp/ppp_generic.c

@@ -1687,7 +1687,7 @@ ppp_push(struct ppp *ppp)
 
 #ifdef CONFIG_PPP_MULTILINK
 static bool mp_protocol_compress __read_mostly = true;
-module_param(mp_protocol_compress, bool, S_IRUGO | S_IWUSR);
+module_param(mp_protocol_compress, bool, 0644);
 MODULE_PARM_DESC(mp_protocol_compress,
 		 "compress protocol id in multilink fragments");
 

drivers/net/ppp/pppoe.c

@@ -1142,7 +1142,7 @@ static __net_init int pppoe_init_net(struct net *net)
 
 	rwlock_init(&pn->hash_lock);
 
-	pde = proc_create("pppoe", S_IRUGO, net->proc_net, &pppoe_seq_fops);
+	pde = proc_create("pppoe", 0444, net->proc_net, &pppoe_seq_fops);
 #ifdef CONFIG_PROC_FS
 	if (!pde)
 		return -ENOMEM;

drivers/net/usb/cdc_ncm.c

@@ -58,7 +58,7 @@ static bool prefer_mbim = true;
 #else
 static bool prefer_mbim;
 #endif
-module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+module_param(prefer_mbim, bool, 0644);
 MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
 
 static void cdc_ncm_txpath_bh(unsigned long param);
@@ -281,10 +281,10 @@ static ssize_t cdc_ncm_store_tx_timer_usecs(struct device *d,  struct device_att
 	return len;
 }
 
-static DEVICE_ATTR(min_tx_pkt, S_IRUGO | S_IWUSR, cdc_ncm_show_min_tx_pkt, cdc_ncm_store_min_tx_pkt);
-static DEVICE_ATTR(rx_max, S_IRUGO | S_IWUSR, cdc_ncm_show_rx_max, cdc_ncm_store_rx_max);
-static DEVICE_ATTR(tx_max, S_IRUGO | S_IWUSR, cdc_ncm_show_tx_max, cdc_ncm_store_tx_max);
-static DEVICE_ATTR(tx_timer_usecs, S_IRUGO | S_IWUSR, cdc_ncm_show_tx_timer_usecs, cdc_ncm_store_tx_timer_usecs);
+static DEVICE_ATTR(min_tx_pkt, 0644, cdc_ncm_show_min_tx_pkt, cdc_ncm_store_min_tx_pkt);
+static DEVICE_ATTR(rx_max, 0644, cdc_ncm_show_rx_max, cdc_ncm_store_rx_max);
+static DEVICE_ATTR(tx_max, 0644, cdc_ncm_show_tx_max, cdc_ncm_store_tx_max);
+static DEVICE_ATTR(tx_timer_usecs, 0644, cdc_ncm_show_tx_timer_usecs, cdc_ncm_store_tx_timer_usecs);
 
 static ssize_t ndp_to_end_show(struct device *d, struct device_attribute *attr, char *buf)
 {
@@ -335,7 +335,7 @@ static ssize_t cdc_ncm_show_##name(struct device *d, struct device_attribute *at
 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; \
 	return sprintf(buf, format "\n", tocpu(ctx->ncm_parm.name));	\
 } \
-static DEVICE_ATTR(name, S_IRUGO, cdc_ncm_show_##name, NULL)
+static DEVICE_ATTR(name, 0444, cdc_ncm_show_##name, NULL)
 
 NCM_PARM_ATTR(bmNtbFormatsSupported, "0x%04x", le16_to_cpu);
 NCM_PARM_ATTR(dwNtbInMaxSize, "%u", le32_to_cpu);

drivers/net/usb/hso.c

@@ -519,7 +519,7 @@ static ssize_t hso_sysfs_show_porttype(struct device *dev,
 
 	return sprintf(buf, "%s\n", port_name);
 }
-static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
+static DEVICE_ATTR(hsotype, 0444, hso_sysfs_show_porttype, NULL);
 
 static struct attribute *hso_serial_dev_attrs[] = {
 	&dev_attr_hsotype.attr,
@@ -3289,12 +3289,12 @@ MODULE_LICENSE("GPL");
 
 /* change the debug level (eg: insmod hso.ko debug=0x04) */
 MODULE_PARM_DESC(debug, "debug level mask [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
-module_param(debug, int, S_IRUGO | S_IWUSR);
+module_param(debug, int, 0644);
 
 /* set the major tty number (eg: insmod hso.ko tty_major=245) */
 MODULE_PARM_DESC(tty_major, "Set the major tty number");
-module_param(tty_major, int, S_IRUGO | S_IWUSR);
+module_param(tty_major, int, 0644);
 
 /* disable network interface (eg: insmod hso.ko disable_net=1) */
 MODULE_PARM_DESC(disable_net, "Disable the network interface");
-module_param(disable_net, int, S_IRUGO | S_IWUSR);
+module_param(disable_net, int, 0644);

drivers/net/xen-netback/xenbus.c

@@ -224,7 +224,7 @@ static void xenvif_debugfs_addif(struct xenvif *vif)
 
 			snprintf(filename, sizeof(filename), "io_ring_q%d", i);
 			pfile = debugfs_create_file(filename,
-						    S_IRUSR | S_IWUSR,
+						    0600,
 						    vif->xenvif_dbg_root,
 						    &vif->queues[i],
 						    &xenvif_dbg_io_ring_ops_fops);
@@ -235,7 +235,7 @@ static void xenvif_debugfs_addif(struct xenvif *vif)
 
 		if (vif->ctrl_irq) {
 			pfile = debugfs_create_file("ctrl",
-						    S_IRUSR,
+						    0400,
 						    vif->xenvif_dbg_root,
 						    vif,
 						    &xenvif_dbg_ctrl_ops_fops);

drivers/net/xen-netfront.c

@@ -2113,9 +2113,9 @@ static ssize_t store_rxbuf(struct device *dev,
 	return len;
 }
 
-static DEVICE_ATTR(rxbuf_min, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf);
-static DEVICE_ATTR(rxbuf_max, S_IRUGO|S_IWUSR, show_rxbuf, store_rxbuf);
-static DEVICE_ATTR(rxbuf_cur, S_IRUGO, show_rxbuf, NULL);
+static DEVICE_ATTR(rxbuf_min, 0644, show_rxbuf, store_rxbuf);
+static DEVICE_ATTR(rxbuf_max, 0644, show_rxbuf, store_rxbuf);
+static DEVICE_ATTR(rxbuf_cur, 0444, show_rxbuf, NULL);
 
 static struct attribute *xennet_dev_attrs[] = {
 	&dev_attr_rxbuf_min.attr,