ARM: dts: Fix pinctrl mask for omap3

The wake-up interrupt bit is available on omap3/4/5 processors
unlike what we claim. Without fixing it we cannot use it on
omap3 and the system configured for wake-up events will just
hang on wake-up.

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap3.dtsi

@@ -108,7 +108,7 @@ omap3_pmx_core: pinmux@48002030 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		omap3_pmx_wkup: pinmux@0x48002a00 {
@@ -117,7 +117,7 @@ omap3_pmx_wkup: pinmux@0x48002a00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		gpio1: gpio@48310000 {

arch/arm/mach-omap2/mux.h

@@ -28,7 +28,7 @@
 #define OMAP_PULL_UP			(1 << 4)
 #define OMAP_ALTELECTRICALSEL		(1 << 5)
 
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
 #define OMAP_INPUT_EN			(1 << 8)
 #define OMAP_OFF_EN			(1 << 9)
 #define OMAP_OFFOUT_EN			(1 << 10)
@@ -36,8 +36,6 @@
 #define OMAP_OFF_PULL_EN		(1 << 12)
 #define OMAP_OFF_PULL_UP		(1 << 13)
 #define OMAP_WAKEUP_EN			(1 << 14)
-
-/* 44xx specific mux bit defines */
 #define OMAP_WAKEUP_EVENT		(1 << 15)
 
 /* Active pin states */

include/dt-bindings/pinctrl/omap.h

@@ -23,7 +23,7 @@
 #define PULL_UP			(1 << 4)
 #define ALTELECTRICALSEL	(1 << 5)
 
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
 #define INPUT_EN		(1 << 8)
 #define OFF_EN			(1 << 9)
 #define OFFOUT_EN		(1 << 10)
@@ -31,8 +31,6 @@
 #define OFF_PULL_EN		(1 << 12)
 #define OFF_PULL_UP		(1 << 13)
 #define WAKEUP_EN		(1 << 14)
-
-/* 44xx specific mux bit defines */
 #define WAKEUP_EVENT		(1 << 15)
 
 /* Active pin states */