iio: adc: ad7791: claim direct mode when writing frequency

Driver was checking for direct mode and trying to lock it, but
left a gap where mode could change before the desired operation.
Use iio_device_claim_direct_mode() to guarantee device stays in
direct mode.

Refactor function to clarify look-up followed by lock sequence.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/ad7791.c

@@ -272,30 +272,22 @@ static ssize_t ad7791_write_frequency(struct device *dev,
 	struct ad7791_state *st = iio_priv(indio_dev);
 	int i, ret;
 
-	mutex_lock(&indio_dev->mlock);
-	if (iio_buffer_enabled(indio_dev)) {
-		mutex_unlock(&indio_dev->mlock);
-		return -EBUSY;
-	}
-	mutex_unlock(&indio_dev->mlock);
-
-	ret = -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(ad7791_sample_freq_avail); i++) {
-		if (sysfs_streq(ad7791_sample_freq_avail[i], buf)) {
+	for (i = 0; i < ARRAY_SIZE(ad7791_sample_freq_avail); i++)
+		if (sysfs_streq(ad7791_sample_freq_avail[i], buf))
+			break;
+	if (i == ARRAY_SIZE(ad7791_sample_freq_avail))
+		return -EINVAL;
 
-			mutex_lock(&indio_dev->mlock);
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
 	st->filter &= ~AD7791_FILTER_RATE_MASK;
 	st->filter |= i;
-			ad_sd_write_reg(&st->sd, AD7791_REG_FILTER,
-					 sizeof(st->filter), st->filter);
-			mutex_unlock(&indio_dev->mlock);
-			ret = 0;
-			break;
-		}
-	}
+	ad_sd_write_reg(&st->sd, AD7791_REG_FILTER, sizeof(st->filter),
+			st->filter);
+	iio_device_release_direct_mode(indio_dev);
 
-	return ret ? ret : len;
+	return len;
 }
 
 static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,