usb: pxa27x_udc driver

Adds pxa27x udc driver to support USB peripherals on pxa27x chips.

The driver is compatible with: Gadget Zero, the File Storage
gadget, and the Ethernet gadget (only in CDC subset mode).

The driver can't properly support multiple interfaces, because
of hardware bugs without possible workaround.  That means no
RNDIS support from g_ether, and no CDC ACM support in g_serial.
Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/Kconfig

@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592
 	   However, this problem is improved if change a value of
 	   NET_IP_ALIGN to 4.
 
+config USB_GADGET_PXA27X
+	boolean "PXA 27x"
+	depends on ARCH_PXA && PXA27x
+	help
+	   Intel's PXA 27x series XScale ARM v5TE processors include
+	   an integrated full speed USB 1.1 device controller.
+
+	   It has up to 23 endpoints, as well as endpoint zero (for
+	   control transfers).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "pxa27x_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+	tristate
+	depends on USB_GADGET_PXA27X
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_GOKU
 	boolean "Toshiba TC86C001 'Goku-S'"
 	depends on PCI

drivers/usb/gadget/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
 obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc.o
 obj-$(CONFIG_USB_PXA2XX)	+= pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
 obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
 obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o

drivers/usb/gadget/ether.c

@@ -235,10 +235,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_CDC
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_CDC
-#endif
-
 #ifdef CONFIG_USB_GADGET_S3C2410
 #define DEV_CONFIG_CDC
 #endif
@@ -270,6 +266,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_SUBSET
 #endif
 
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define	DEV_CONFIG_SUBSET
+#endif
+
 #ifdef CONFIG_USB_GADGET_SUPERH
 #define	DEV_CONFIG_SUBSET
 #endif