Skip to content

L
linux
Commit d808f7ca authored by Raju Lakkaraju's avatar Raju Lakkaraju Committed by David S. Miller
Browse files
Options

net: lan743x: Add support for OTP 

Add new the OTP read and write access functions for PCI11010/PCI11414 chips
PCI11010/PCI11414 OTP module register offsets are different from
LAN743x OTP module
Signed-off-by: default avatarRaju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cdea83cc
Show whitespace changes
Inline Side-by-side
Showing with 180 additions and 3 deletions
drivers/net/ethernet/microchip/lan743x_ethtool.c
View file @ d808f7ca
......@@ -212,6 +212,160 @@ static void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
spin_unlock(&adapter->eth_syslock_spinlock);
}
static void lan743x_hs_otp_power_up(struct lan743x_adapter *adapter)
{
u32 reg_value;
reg_value = lan743x_csr_read(adapter, HS_OTP_PWR_DN);
if (reg_value & OTP_PWR_DN_PWRDN_N_) {
reg_value &= ~OTP_PWR_DN_PWRDN_N_;
lan743x_csr_write(adapter, HS_OTP_PWR_DN, reg_value);
/* To flush the posted write so the subsequent delay is
* guaranteed to happen after the write at the hardware
*/
lan743x_csr_read(adapter, HS_OTP_PWR_DN);
udelay(1);
}
}
static void lan743x_hs_otp_power_down(struct lan743x_adapter *adapter)
{
u32 reg_value;
reg_value = lan743x_csr_read(adapter, HS_OTP_PWR_DN);
if (!(reg_value & OTP_PWR_DN_PWRDN_N_)) {
reg_value |= OTP_PWR_DN_PWRDN_N_;
lan743x_csr_write(adapter, HS_OTP_PWR_DN, reg_value);
/* To flush the posted write so the subsequent delay is
* guaranteed to happen after the write at the hardware
*/
lan743x_csr_read(adapter, HS_OTP_PWR_DN);
udelay(1);
}
}
static void lan743x_hs_otp_set_address(struct lan743x_adapter *adapter,
u32 address)
{
lan743x_csr_write(adapter, HS_OTP_ADDR_HIGH, (address >> 8) & 0x03);
lan743x_csr_write(adapter, HS_OTP_ADDR_LOW, address & 0xFF);
}
static void lan743x_hs_otp_read_go(struct lan743x_adapter *adapter)
{
lan743x_csr_write(adapter, HS_OTP_FUNC_CMD, OTP_FUNC_CMD_READ_);
lan743x_csr_write(adapter, HS_OTP_CMD_GO, OTP_CMD_GO_GO_);
}
static int lan743x_hs_otp_cmd_cmplt_chk(struct lan743x_adapter *adapter)
{
u32 val;
return readx_poll_timeout(LAN743X_CSR_READ_OP, HS_OTP_STATUS, val,
!(val & OTP_STATUS_BUSY_),
80, 10000);
}
static int lan743x_hs_otp_read(struct lan743x_adapter *adapter, u32 offset,
u32 length, u8 *data)
{
int ret;
int i;
ret = lan743x_hs_syslock_acquire(adapter, LOCK_TIMEOUT_MAX_CNT);
if (ret < 0)
return ret;
lan743x_hs_otp_power_up(adapter);
ret = lan743x_hs_otp_cmd_cmplt_chk(adapter);
if (ret < 0)
goto power_down;
lan743x_hs_syslock_release(adapter);
for (i = 0; i < length; i++) {
ret = lan743x_hs_syslock_acquire(adapter,
LOCK_TIMEOUT_MAX_CNT);
if (ret < 0)
return ret;
lan743x_hs_otp_set_address(adapter, offset + i);
lan743x_hs_otp_read_go(adapter);
ret = lan743x_hs_otp_cmd_cmplt_chk(adapter);
if (ret < 0)
goto power_down;
data[i] = lan743x_csr_read(adapter, HS_OTP_READ_DATA);
lan743x_hs_syslock_release(adapter);
}
ret = lan743x_hs_syslock_acquire(adapter,
LOCK_TIMEOUT_MAX_CNT);
if (ret < 0)
return ret;
power_down:
lan743x_hs_otp_power_down(adapter);
lan743x_hs_syslock_release(adapter);
return ret;
}
static int lan743x_hs_otp_write(struct lan743x_adapter *adapter, u32 offset,
u32 length, u8 *data)
{
int ret;
int i;
ret = lan743x_hs_syslock_acquire(adapter, LOCK_TIMEOUT_MAX_CNT);
if (ret < 0)
return ret;
lan743x_hs_otp_power_up(adapter);
ret = lan743x_hs_otp_cmd_cmplt_chk(adapter);
if (ret < 0)
goto power_down;
/* set to BYTE program mode */
lan743x_csr_write(adapter, HS_OTP_PRGM_MODE, OTP_PRGM_MODE_BYTE_);
lan743x_hs_syslock_release(adapter);
for (i = 0; i < length; i++) {
ret = lan743x_hs_syslock_acquire(adapter,
LOCK_TIMEOUT_MAX_CNT);
if (ret < 0)
return ret;
lan743x_hs_otp_set_address(adapter, offset + i);
lan743x_csr_write(adapter, HS_OTP_PRGM_DATA, data[i]);
lan743x_csr_write(adapter, HS_OTP_TST_CMD,
OTP_TST_CMD_PRGVRFY_);
lan743x_csr_write(adapter, HS_OTP_CMD_GO, OTP_CMD_GO_GO_);
ret = lan743x_hs_otp_cmd_cmplt_chk(adapter);
if (ret < 0)
goto power_down;
lan743x_hs_syslock_release(adapter);
}
ret = lan743x_hs_syslock_acquire(adapter, LOCK_TIMEOUT_MAX_CNT);
if (ret < 0)
return ret;
power_down:
lan743x_hs_otp_power_down(adapter);
lan743x_hs_syslock_release(adapter);
return ret;
}
static int lan743x_eeprom_wait(struct lan743x_adapter *adapter)
{
unsigned long start_time = jiffies;
......@@ -462,7 +616,12 @@ static int lan743x_ethtool_get_eeprom(struct net_device *netdev,
int ret = 0;
if (adapter->flags & LAN743X_ADAPTER_FLAG_OTP) {
ret = lan743x_otp_read(adapter, ee->offset, ee->len, data);
if (adapter->is_pci11x1x)
ret = lan743x_hs_otp_read(adapter, ee->offset,
ee->len, data);
else
ret = lan743x_otp_read(adapter, ee->offset,
ee->len, data);
} else {
if (adapter->is_pci11x1x)
ret = lan743x_hs_eeprom_read(adapter, ee->offset,
......@@ -484,6 +643,10 @@ static int lan743x_ethtool_set_eeprom(struct net_device *netdev,
if (adapter->flags & LAN743X_ADAPTER_FLAG_OTP) {
/* Beware! OTP is One Time Programming ONLY! */
if (ee->magic == LAN743X_OTP_MAGIC) {
if (adapter->is_pci11x1x)
ret = lan743x_hs_otp_write(adapter, ee->offset,
ee->len, data);
else
ret = lan743x_otp_write(adapter, ee->offset,
ee->len, data);
}
......
drivers/net/ethernet/microchip/lan743x_main.h
View file @ d808f7ca
......@@ -556,6 +556,20 @@
#define OTP_STATUS (0x1030)
#define OTP_STATUS_BUSY_ BIT(0)
/* Hearthstone OTP block registers */
#define HS_OTP_BLOCK_BASE (ETH_SYS_REG_ADDR_BASE + \
ETH_OTP_REG_ADDR_BASE)
#define HS_OTP_PWR_DN (HS_OTP_BLOCK_BASE + 0x0)
#define HS_OTP_ADDR_HIGH (HS_OTP_BLOCK_BASE + 0x4)
#define HS_OTP_ADDR_LOW (HS_OTP_BLOCK_BASE + 0x8)
#define HS_OTP_PRGM_DATA (HS_OTP_BLOCK_BASE + 0x10)
#define HS_OTP_PRGM_MODE (HS_OTP_BLOCK_BASE + 0x14)
#define HS_OTP_READ_DATA (HS_OTP_BLOCK_BASE + 0x18)
#define HS_OTP_FUNC_CMD (HS_OTP_BLOCK_BASE + 0x20)
#define HS_OTP_TST_CMD (HS_OTP_BLOCK_BASE + 0x24)
#define HS_OTP_CMD_GO (HS_OTP_BLOCK_BASE + 0x28)
#define HS_OTP_STATUS (HS_OTP_BLOCK_BASE + 0x30)
/* MAC statistics registers */
#define STAT_RX_FCS_ERRORS (0x1200)
#define STAT_RX_ALIGNMENT_ERRORS (0x1204)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7