Merge tag 'v5.16-rockchip-dtsfixes1' of...

Merge tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Fixes for some board-level issues (regulators, mmc, poweroff, audio)

* tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: fix poweroff on helios64
  arm64: dts: rockchip: fix audio-supply for Rock Pi 4
  arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
  arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
  arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge

Link: https://lore.kernel.org/r/3072346.MIvVl8DfR5@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts

@@ -97,7 +97,7 @@ vcc_sd: vcc-sd {
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
-		vim-supply = <&vcc_io>;
+		vin-supply = <&vcc_io>;
 	};
 
 	vdd_core: vdd-core {

arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi

@@ -705,7 +705,6 @@ &sdmmc {
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts

@@ -276,6 +276,7 @@ rk808: pmic@1b {
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;

arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts

@@ -55,7 +55,7 @@ vcc3v3_lan: vcc3v3-lan {
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vim-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc3v3_sys>;
 	};
 
 	vcc3v3_sys: vcc3v3-sys {

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi

@@ -502,7 +502,7 @@ &io_domains {
 	status = "okay";
 
 	bt656-supply = <&vcc_3v0>;
-	audio-supply = <&vcc_3v0>;
+	audio-supply = <&vcc1v8_codec>;
 	sdmmc-supply = <&vcc_sdio>;
 	gpio1830-supply = <&vcc_3v0>;
 };