net: dsa: realtek-smi: Add Realtek SMI driver

This adds a driver core for the Realtek SMI chips and a
subdriver for the RTL8366RB. I just added this chip simply
because it is all I can test.

The code is a massaged variant of the code that has been
sitting out-of-tree in OpenWRT for years in the absence of
a proper switch subsystem. This creates a DSA driver for it.
I have tried to credit the original authors wherever
possible.

The main changes I've done from the OpenWRT code:

- Added an IRQ chip inside the RTL8366RB switch to demux and
  handle the line state IRQs.

- Distributed the phy handling out to the PHY driver.

- Added some RTL8366RB code that was missing in the driver at
  the time, such as setting up "green ethernet" with a funny
  jam table and forcing MAC5 (the CPU port) into 1 GBit.

- Select jam table and add the default jam table from the
  vendor driver, also for ASIC "version 0" if need be.

- Do not store jam tables in the device tree, store them
  in the driver.

- Pick in the "initvals" jam tables from OpenWRT's driver
  and make those get selected per compatible for the
  whole system. It's apparently about electrical settings
  for this system and whatnot, not really configuration
  from device tree.

- Implemented LED control: beware of bugs because there are
  no LEDs on the device I am using!

We do not implement custom DSA tags. This is explained in
a comment in the driver as well: this "tagging protocol" is
not simply a few extra bytes tagged on to the ethernet
frame as DSA is used to. Instead, enabling the CPU tags
will make the switch start talking Realtek RRCP internally.
For example a simple ping will make this kind of packets
appear inside the switch:

0000   ff ff ff ff ff ff bc ae c5 6b a8 3d 88 99 a2 00
0010   08 06 00 01 08 00 06 04 00 01 bc ae c5 6b a8 3d
0020   a9 fe 01 01 00 00 00 00 00 00 a9 fe 01 02 00 00
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

As you can see a custom "8899" tagged packet using the
protocol 0xa2. Norm RRCP appears to always have this
protocol set to 0x01 according to OpenRRCP. You can also
see that this is not a ping packet at all, instead the
switch is starting to talk network management issues
with the CPU port.

So for now custom "tagging" is disabled.

This was tested on the D-Link DIR-685 with initramfs and
OpenWRT userspaces and works fine on all the LAN ports
(lan0 .. lan3). The WAN port is yet not working.

Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: Roman Yeryomin <roman@advem.lv>
Cc: Colin Leitner <colin.leitner@googlemail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -12063,6 +12063,13 @@ S:	Maintained
 F:	sound/soc/codecs/rt*
 F:	include/sound/rt*.h
 
+REALTEK RTL83xx SMI DSA ROUTER CHIPS
+M:	Linus Walleij <linus.walleij@linaro.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+F:	drivers/net/dsa/realtek-smi*
+F:	drivers/net/dsa/rtl83*
+
 REGISTER MAP ABSTRACTION
 M:	Mark Brown <broonie@kernel.org>
 L:	linux-kernel@vger.kernel.org

drivers/net/dsa/Kconfig

@@ -52,6 +52,17 @@ config NET_DSA_QCA8K
 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
 	  switch chips.
 
+config NET_DSA_REALTEK_SMI
+	tristate "Realtek SMI Ethernet switch family support"
+	depends on NET_DSA
+	select FIXED_PHY
+	select IRQ_DOMAIN
+	select REALTEK_PHY
+	select REGMAP
+	---help---
+	  This enables support for the Realtek SMI-based switch
+	  chips, currently only RTL8366RB.
+
 config NET_DSA_SMSC_LAN9303
 	tristate
 	select NET_DSA_TAG_LAN9303

drivers/net/dsa/Makefile

@@ -8,6 +8,8 @@ endif
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek.o
+realtek-objs			:= realtek-smi.o rtl8366.o rtl8366rb.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o

drivers/net/dsa/realtek-smi.c

+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek Simple Management Interface (SMI) driver
+ * It can be discussed how "simple" this interface is.
+ *
+ * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels
+ * but the protocol is not MDIO at all. Instead it is a Realtek
+ * pecularity that need to bit-bang the lines in a special way to
+ * communicate with the switch.
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366   - The original version, apparently
+ * RTL8369   - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ *             different register layout from the other two
+ * RTL8366S  - Is this "RTL8366 super"?
+ * RTL8367   - Has an OpenWRT driver as well
+ * RTL8368S  - Seems to be an alternative name for RTL8366RB
+ * RTL8370   - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+
+#include "realtek-smi.h"
+
+#define REALTEK_SMI_ACK_RETRY_COUNT		5
+#define REALTEK_SMI_HW_STOP_DELAY		25	/* msecs */
+#define REALTEK_SMI_HW_START_DELAY		100	/* msecs */
+
+static inline void realtek_smi_clk_delay(struct realtek_smi *smi)
+{
+	ndelay(smi->clk_delay);
+}
+
+static void realtek_smi_start(struct realtek_smi *smi)
+{
+	/* Set GPIO pins to output mode, with initial state:
+	 * SCK = 0, SDA = 1
+	 */
+	gpiod_direction_output(smi->mdc, 0);
+	gpiod_direction_output(smi->mdio, 1);
+	realtek_smi_clk_delay(smi);
+
+	/* CLK 1: 0 -> 1, 1 -> 0 */
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+
+	/* CLK 2: */
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 1);
+}
+
+static void realtek_smi_stop(struct realtek_smi *smi)
+{
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 0);
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 1);
+
+	/* Add a click */
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 1);
+
+	/* Set GPIO pins to input mode */
+	gpiod_direction_input(smi->mdio);
+	gpiod_direction_input(smi->mdc);
+}
+
+static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len)
+{
+	for (; len > 0; len--) {
+		realtek_smi_clk_delay(smi);
+
+		/* Prepare data */
+		gpiod_set_value(smi->mdio, !!(data & (1 << (len - 1))));
+		realtek_smi_clk_delay(smi);
+
+		/* Clocking */
+		gpiod_set_value(smi->mdc, 1);
+		realtek_smi_clk_delay(smi);
+		gpiod_set_value(smi->mdc, 0);
+	}
+}
+
+static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data)
+{
+	gpiod_direction_input(smi->mdio);
+
+	for (*data = 0; len > 0; len--) {
+		u32 u;
+
+		realtek_smi_clk_delay(smi);
+
+		/* Clocking */
+		gpiod_set_value(smi->mdc, 1);
+		realtek_smi_clk_delay(smi);
+		u = !!gpiod_get_value(smi->mdio);
+		gpiod_set_value(smi->mdc, 0);
+
+		*data |= (u << (len - 1));
+	}
+
+	gpiod_direction_output(smi->mdio, 0);
+}
+
+static int realtek_smi_wait_for_ack(struct realtek_smi *smi)
+{
+	int retry_cnt;
+
+	retry_cnt = 0;
+	do {
+		u32 ack;
+
+		realtek_smi_read_bits(smi, 1, &ack);
+		if (ack == 0)
+			break;
+
+		if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) {
+			dev_err(smi->dev, "ACK timeout\n");
+			return -ETIMEDOUT;
+		}
+	} while (1);
+
+	return 0;
+}
+
+static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data)
+{
+	realtek_smi_write_bits(smi, data, 8);
+	return realtek_smi_wait_for_ack(smi);
+}
+
+static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data)
+{
+	realtek_smi_write_bits(smi, data, 8);
+	return 0;
+}
+
+static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* Read data */
+	realtek_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* Send an ACK */
+	realtek_smi_write_bits(smi, 0x00, 1);
+
+	return 0;
+}
+
+static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* Read data */
+	realtek_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* Send an ACK */
+	realtek_smi_write_bits(smi, 0x01, 1);
+
+	return 0;
+}
+
+static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data)
+{
+	unsigned long flags;
+	u8 lo = 0;
+	u8 hi = 0;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	realtek_smi_start(smi);
+
+	/* Send READ command */
+	ret = realtek_smi_write_byte(smi, smi->cmd_read);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[7:0] */
+	ret = realtek_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[15:8] */
+	ret = realtek_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* Read DATA[7:0] */
+	realtek_smi_read_byte0(smi, &lo);
+	/* Read DATA[15:8] */
+	realtek_smi_read_byte1(smi, &hi);
+
+	*data = ((u32)lo) | (((u32)hi) << 8);
+
+	ret = 0;
+
+ out:
+	realtek_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+
+static int realtek_smi_write_reg(struct realtek_smi *smi,
+				 u32 addr, u32 data, bool ack)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	realtek_smi_start(smi);
+
+	/* Send WRITE command */
+	ret = realtek_smi_write_byte(smi, smi->cmd_write);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[7:0] */
+	ret = realtek_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[15:8] */
+	ret = realtek_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* Write DATA[7:0] */
+	ret = realtek_smi_write_byte(smi, data & 0xff);
+	if (ret)
+		goto out;
+
+	/* Write DATA[15:8] */
+	if (ack)
+		ret = realtek_smi_write_byte(smi, data >> 8);
+	else
+		ret = realtek_smi_write_byte_noack(smi, data >> 8);
+	if (ret)
+		goto out;
+
+	ret = 0;
+
+ out:
+	realtek_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+
+/* There is one single case when we need to use this accessor and that
+ * is when issueing soft reset. Since the device reset as soon as we write
+ * that bit, no ACK will come back for natural reasons.
+ */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+				u32 data)
+{
+	return realtek_smi_write_reg(smi, addr, data, false);
+}
+EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack);
+
+/* Regmap accessors */
+
+static int realtek_smi_write(void *ctx, u32 reg, u32 val)
+{
+	struct realtek_smi *smi = ctx;
+
+	return realtek_smi_write_reg(smi, reg, val, true);
+}
+
+static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
+{
+	struct realtek_smi *smi = ctx;
+
+	return realtek_smi_read_reg(smi, reg, val);
+}
+
+static const struct regmap_config realtek_smi_mdio_regmap_config = {
+	.reg_bits = 10, /* A4..A0 R4..R0 */
+	.val_bits = 16,
+	.reg_stride = 1,
+	/* PHY regs are at 0x8000 */
+	.max_register = 0xffff,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.reg_read = realtek_smi_read,
+	.reg_write = realtek_smi_write,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+	struct realtek_smi *smi = bus->priv;
+
+	return smi->ops->phy_read(smi, addr, regnum);
+}
+
+static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
+				  u16 val)
+{
+	struct realtek_smi *smi = bus->priv;
+
+	return smi->ops->phy_write(smi, addr, regnum, val);
+}
+
+int realtek_smi_setup_mdio(struct realtek_smi *smi)
+{
+	struct device_node *mdio_np;
+	int ret;
+
+	mdio_np = of_find_compatible_node(smi->dev->of_node, NULL,
+					  "realtek,smi-mdio");
+	if (!mdio_np) {
+		dev_err(smi->dev, "no MDIO bus node\n");
+		return -ENODEV;
+	}
+
+	smi->slave_mii_bus = devm_mdiobus_alloc(smi->dev);
+	if (!smi->slave_mii_bus)
+		return -ENOMEM;
+	smi->slave_mii_bus->priv = smi;
+	smi->slave_mii_bus->name = "SMI slave MII";
+	smi->slave_mii_bus->read = realtek_smi_mdio_read;
+	smi->slave_mii_bus->write = realtek_smi_mdio_write;
+	snprintf(smi->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
+		 smi->ds->index);
+	smi->slave_mii_bus->dev.of_node = mdio_np;
+	smi->slave_mii_bus->parent = smi->dev;
+	smi->ds->slave_mii_bus = smi->slave_mii_bus;
+
+	ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np);
+	if (ret) {
+		dev_err(smi->dev, "unable to register MDIO bus %s\n",
+			smi->slave_mii_bus->id);
+		of_node_put(mdio_np);
+	}
+
+	return 0;
+}
+
+static int realtek_smi_probe(struct platform_device *pdev)
+{
+	const struct realtek_smi_variant *var;
+	struct device *dev = &pdev->dev;
+	struct realtek_smi *smi;
+	struct device_node *np;
+	int ret;
+
+	var = of_device_get_match_data(dev);
+	np = dev->of_node;
+
+	smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
+	if (!smi)
+		return -ENOMEM;
+	smi->map = devm_regmap_init(dev, NULL, smi,
+				    &realtek_smi_mdio_regmap_config);
+	if (IS_ERR(smi->map)) {
+		ret = PTR_ERR(smi->map);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Link forward and backward */
+	smi->dev = dev;
+	smi->clk_delay = var->clk_delay;
+	smi->cmd_read = var->cmd_read;
+	smi->cmd_write = var->cmd_write;
+	smi->ops = var->ops;
+
+	dev_set_drvdata(dev, smi);
+	spin_lock_init(&smi->lock);
+
+	/* TODO: if power is software controlled, set up any regulators here */
+
+	/* Assert then deassert RESET */
+	smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(smi->reset)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return PTR_ERR(smi->reset);
+	}
+	msleep(REALTEK_SMI_HW_STOP_DELAY);
+	gpiod_set_value(smi->reset, 0);
+	msleep(REALTEK_SMI_HW_START_DELAY);
+	dev_info(dev, "deasserted RESET\n");
+
+	/* Fetch MDIO pins */
+	smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
+	if (IS_ERR(smi->mdc))
+		return PTR_ERR(smi->mdc);
+	smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
+	if (IS_ERR(smi->mdio))
+		return PTR_ERR(smi->mdio);
+
+	smi->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+	ret = smi->ops->detect(smi);
+	if (ret) {
+		dev_err(dev, "unable to detect switch\n");
+		return ret;
+	}
+
+	smi->ds = dsa_switch_alloc(dev, smi->num_ports);
+	if (!smi->ds)
+		return -ENOMEM;
+	smi->ds->priv = smi;
+
+	smi->ds->ops = var->ds_ops;
+	ret = dsa_register_switch(smi->ds);
+	if (ret) {
+		dev_err(dev, "unable to register switch ret = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int realtek_smi_remove(struct platform_device *pdev)
+{
+	struct realtek_smi *smi = dev_get_drvdata(&pdev->dev);
+
+	dsa_unregister_switch(smi->ds);
+	gpiod_set_value(smi->reset, 1);
+
+	return 0;
+}
+
+static const struct of_device_id realtek_smi_of_match[] = {
+	{
+		.compatible = "realtek,rtl8366rb",
+		.data = &rtl8366rb_variant,
+	},
+	{
+		/* FIXME: add support for RTL8366S and more */
+		.compatible = "realtek,rtl8366s",
+		.data = NULL,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
+
+static struct platform_driver realtek_smi_driver = {
+	.driver = {
+		.name = "realtek-smi",
+		.of_match_table = of_match_ptr(realtek_smi_of_match),
+	},
+	.probe  = realtek_smi_probe,
+	.remove = realtek_smi_remove,
+};
+module_platform_driver(realtek_smi_driver);

drivers/net/dsa/realtek-smi.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Realtek SMI interface driver defines
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#ifndef _REALTEK_SMI_H
+#define _REALTEK_SMI_H
+
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <net/dsa.h>
+
+struct realtek_smi_ops;
+struct dentry;
+struct inode;
+struct file;
+
+struct rtl8366_mib_counter {
+	unsigned int	base;
+	unsigned int	offset;
+	unsigned int	length;
+	const char	*name;
+};
+
+struct rtl8366_vlan_mc {
+	u16	vid;
+	u16	untag;
+	u16	member;
+	u8	fid;
+	u8	priority;
+};
+
+struct rtl8366_vlan_4k {
+	u16	vid;
+	u16	untag;
+	u16	member;
+	u8	fid;
+};
+
+struct realtek_smi {
+	struct device		*dev;
+	struct gpio_desc	*reset;
+	struct gpio_desc	*mdc;
+	struct gpio_desc	*mdio;
+	struct regmap		*map;
+	struct mii_bus		*slave_mii_bus;
+
+	unsigned int		clk_delay;
+	u8			cmd_read;
+	u8			cmd_write;
+	spinlock_t		lock; /* Locks around command writes */
+	struct dsa_switch	*ds;
+	struct irq_domain	*irqdomain;
+	bool			leds_disabled;
+
+	unsigned int		cpu_port;
+	unsigned int		num_ports;
+	unsigned int		num_vlan_mc;
+	unsigned int		num_mib_counters;
+	struct rtl8366_mib_counter *mib_counters;
+
+	const struct realtek_smi_ops *ops;
+
+	int			vlan_enabled;
+	int			vlan4k_enabled;
+
+	char			buf[4096];
+};
+
+/**
+ * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations
+ * @detect: detects the chiptype
+ */
+struct realtek_smi_ops {
+	int	(*detect)(struct realtek_smi *smi);
+	int	(*reset_chip)(struct realtek_smi *smi);
+	int	(*setup)(struct realtek_smi *smi);
+	void	(*cleanup)(struct realtek_smi *smi);
+	int	(*get_mib_counter)(struct realtek_smi *smi,
+				   int port,
+				   struct rtl8366_mib_counter *mib,
+				   u64 *mibvalue);
+	int	(*get_vlan_mc)(struct realtek_smi *smi, u32 index,
+			       struct rtl8366_vlan_mc *vlanmc);
+	int	(*set_vlan_mc)(struct realtek_smi *smi, u32 index,
+			       const struct rtl8366_vlan_mc *vlanmc);
+	int	(*get_vlan_4k)(struct realtek_smi *smi, u32 vid,
+			       struct rtl8366_vlan_4k *vlan4k);
+	int	(*set_vlan_4k)(struct realtek_smi *smi,
+			       const struct rtl8366_vlan_4k *vlan4k);
+	int	(*get_mc_index)(struct realtek_smi *smi, int port, int *val);
+	int	(*set_mc_index)(struct realtek_smi *smi, int port, int index);
+	bool	(*is_vlan_valid)(struct realtek_smi *smi, unsigned int vlan);
+	int	(*enable_vlan)(struct realtek_smi *smi, bool enable);
+	int	(*enable_vlan4k)(struct realtek_smi *smi, bool enable);
+	int	(*enable_port)(struct realtek_smi *smi, int port, bool enable);
+	int	(*phy_read)(struct realtek_smi *smi, int phy, int regnum);
+	int	(*phy_write)(struct realtek_smi *smi, int phy, int regnum,
+			     u16 val);
+};
+
+struct realtek_smi_variant {
+	const struct dsa_switch_ops *ds_ops;
+	const struct realtek_smi_ops *ops;
+	unsigned int clk_delay;
+	u8 cmd_read;
+	u8 cmd_write;
+};
+
+/* SMI core calls */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+				u32 data);
+int realtek_smi_setup_mdio(struct realtek_smi *smi);
+
+/* RTL8366 library helpers */
+int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used);
+int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
+		     u32 untag, u32 fid);
+int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val);
+int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
+		     unsigned int vid);
+int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
+int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
+int rtl8366_reset_vlan(struct realtek_smi *smi);
+int rtl8366_init_vlan(struct realtek_smi *smi);
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port,
+			   bool vlan_filtering);
+int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_vlan_add(struct dsa_switch *ds, int port,
+		      const struct switchdev_obj_port_vlan *vlan);
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+			 uint8_t *data);
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset);
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
+
+extern const struct realtek_smi_variant rtl8366rb_variant;
+
+#endif /*  _REALTEK_SMI_H */

drivers/net/dsa/rtl8366.c

+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI library helpers for the RTL8366x variants
+ * RTL8366RB and RTL8366S
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+
+#include "realtek-smi.h"
+
+int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
+{
+	int ret;
+	int i;
+
+	*used = 0;
+	for (i = 0; i < smi->num_ports; i++) {
+		int index = 0;
+
+		ret = smi->ops->get_mc_index(smi, i, &index);
+		if (ret)
+			return ret;
+
+		if (mc_index == index) {
+			*used = 1;
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+
+int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
+		     u32 untag, u32 fid)
+{
+	struct rtl8366_vlan_4k vlan4k;
+	int ret;
+	int i;
+
+	/* Update the 4K table */
+	ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+	if (ret)
+		return ret;
+
+	vlan4k.member = member;
+	vlan4k.untag = untag;
+	vlan4k.fid = fid;
+	ret = smi->ops->set_vlan_4k(smi, &vlan4k);
+	if (ret)
+		return ret;
+
+	/* Try to find an existing MC entry for this VID */
+	for (i = 0; i < smi->num_vlan_mc; i++) {
+		struct rtl8366_vlan_mc vlanmc;
+
+		ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+		if (ret)
+			return ret;
+
+		if (vid == vlanmc.vid) {
+			/* update the MC entry */
+			vlanmc.member = member;
+			vlanmc.untag = untag;
+			vlanmc.fid = fid;
+
+			ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+			break;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
+
+int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int ret;
+	int index;
+
+	ret = smi->ops->get_mc_index(smi, port, &index);
+	if (ret)
+		return ret;
+
+	ret = smi->ops->get_vlan_mc(smi, index, &vlanmc);
+	if (ret)
+		return ret;
+
+	*val = vlanmc.vid;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_pvid);
+
+int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
+		     unsigned int vid)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	struct rtl8366_vlan_4k vlan4k;
+	int ret;
+	int i;
+
+	/* Try to find an existing MC entry for this VID */
+	for (i = 0; i < smi->num_vlan_mc; i++) {
+		ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+		if (ret)
+			return ret;
+
+		if (vid == vlanmc.vid) {
+			ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+			if (ret)
+				return ret;
+
+			ret = smi->ops->set_mc_index(smi, port, i);
+			return ret;
+		}
+	}
+
+	/* We have no MC entry for this VID, try to find an empty one */
+	for (i = 0; i < smi->num_vlan_mc; i++) {
+		ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+		if (ret)
+			return ret;
+
+		if (vlanmc.vid == 0 && vlanmc.member == 0) {
+			/* Update the entry from the 4K table */
+			ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+			if (ret)
+				return ret;
+
+			vlanmc.vid = vid;
+			vlanmc.member = vlan4k.member;
+			vlanmc.untag = vlan4k.untag;
+			vlanmc.fid = vlan4k.fid;
+			ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+			if (ret)
+				return ret;
+
+			ret = smi->ops->set_mc_index(smi, port, i);
+			return ret;
+		}
+	}
+
+	/* MC table is full, try to find an unused entry and replace it */
+	for (i = 0; i < smi->num_vlan_mc; i++) {
+		int used;
+
+		ret = rtl8366_mc_is_used(smi, i, &used);
+		if (ret)
+			return ret;
+
+		if (!used) {
+			/* Update the entry from the 4K table */
+			ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
+			if (ret)
+				return ret;
+
+			vlanmc.vid = vid;
+			vlanmc.member = vlan4k.member;
+			vlanmc.untag = vlan4k.untag;
+			vlanmc.fid = vlan4k.fid;
+			ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+			if (ret)
+				return ret;
+
+			ret = smi->ops->set_mc_index(smi, port, i);
+			return ret;
+		}
+	}
+
+	dev_err(smi->dev,
+		"all VLAN member configurations are in use\n");
+
+	return -ENOSPC;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
+
+int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable)
+{
+	int ret;
+
+	/* To enable 4k VLAN, ordinary VLAN must be enabled first,
+	 * but if we disable 4k VLAN it is fine to leave ordinary
+	 * VLAN enabled.
+	 */
+	if (enable) {
+		/* Make sure VLAN is ON */
+		ret = smi->ops->enable_vlan(smi, true);
+		if (ret)
+			return ret;
+
+		smi->vlan_enabled = true;
+	}
+
+	ret = smi->ops->enable_vlan4k(smi, enable);
+	if (ret)
+		return ret;
+
+	smi->vlan4k_enabled = enable;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);
+
+int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable)
+{
+	int ret;
+
+	ret = smi->ops->enable_vlan(smi, enable);
+	if (ret)
+		return ret;
+
+	smi->vlan_enabled = enable;
+
+	/* If we turn VLAN off, make sure that we turn off
+	 * 4k VLAN as well, if that happened to be on.
+	 */
+	if (!enable) {
+		smi->vlan4k_enabled = false;
+		ret = smi->ops->enable_vlan4k(smi, false);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);
+
+int rtl8366_reset_vlan(struct realtek_smi *smi)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	struct rtl8366_vlan_4k vlan4k;
+	int ret;
+	int i;
+
+	rtl8366_enable_vlan(smi, false);
+	rtl8366_enable_vlan4k(smi, false);
+
+	/* Clear the 16 VLAN member configurations */
+	vlanmc.vid = 0;
+	vlanmc.priority = 0;
+	vlanmc.member = 0;
+	vlanmc.untag = 0;
+	vlanmc.fid = 0;
+	for (i = 0; i < smi->num_vlan_mc; i++) {
+		ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
+
+int rtl8366_init_vlan(struct realtek_smi *smi)
+{
+	int port;
+	int ret;
+
+	ret = rtl8366_reset_vlan(smi);
+	if (ret)
+		return ret;
+
+	/* Loop over the available ports, for each port, associate
+	 * it with the VLAN (port+1)
+	 */
+	for (port = 0; port < smi->num_ports; port++) {
+		u32 mask;
+
+		if (port == smi->cpu_port)
+			/* For the CPU port, make all ports members of this
+			 * VLAN.
+			 */
+			mask = GENMASK(smi->num_ports - 1, 0);
+		else
+			/* For all other ports, enable itself plus the
+			 * CPU port.
+			 */
+			mask = BIT(port) | BIT(smi->cpu_port);
+
+		/* For each port, set the port as member of VLAN (port+1)
+		 * and untagged, except for the CPU port: the CPU port (5) is
+		 * member of VLAN 6 and so are ALL the other ports as well.
+		 * Use filter 0 (no filter).
+		 */
+		dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
+			 (port + 1), port, mask);
+		ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
+		if (ret)
+			return ret;
+
+		dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
+			 (port + 1), port, (port + 1));
+		ret = rtl8366_set_pvid(smi, port, (port + 1));
+		if (ret)
+			return ret;
+	}
+
+	return rtl8366_enable_vlan(smi, true);
+}
+EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
+
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
+{
+	struct realtek_smi *smi = ds->priv;
+	struct rtl8366_vlan_4k vlan4k;
+	int ret;
+
+	if (!smi->ops->is_vlan_valid(smi, port))
+		return -EINVAL;
+
+	dev_info(smi->dev, "%s filtering on port %d\n",
+		 vlan_filtering ? "enable" : "disable",
+		 port);
+
+	/* TODO:
+	 * The hardware support filter ID (FID) 0..7, I have no clue how to
+	 * support this in the driver when the callback only says on/off.
+	 */
+	ret = smi->ops->get_vlan_4k(smi, port, &vlan4k);
+	if (ret)
+		return ret;
+
+	/* Just set the filter to FID 1 for now then */
+	ret = rtl8366_set_vlan(smi, port,
+			       vlan4k.member,
+			       vlan4k.untag,
+			       1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
+
+int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_port_vlan *vlan)
+{
+	struct realtek_smi *smi = ds->priv;
+	int ret;
+
+	if (!smi->ops->is_vlan_valid(smi, port))
+		return -EINVAL;
+
+	dev_info(smi->dev, "prepare VLANs %04x..%04x\n",
+		 vlan->vid_begin, vlan->vid_end);
+
+	/* Enable VLAN in the hardware
+	 * FIXME: what's with this 4k business?
+	 * Just rtl8366_enable_vlan() seems inconclusive.
+	 */
+	ret = rtl8366_enable_vlan4k(smi, true);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare);
+
+void rtl8366_vlan_add(struct dsa_switch *ds, int port,
+		      const struct switchdev_obj_port_vlan *vlan)
+{
+	bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+	bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
+	struct realtek_smi *smi = ds->priv;
+	u32 member = 0;
+	u32 untag = 0;
+	u16 vid;
+	int ret;
+
+	if (!smi->ops->is_vlan_valid(smi, port))
+		return;
+
+	dev_info(smi->dev, "add VLAN on port %d, %s, %s\n",
+		 port,
+		 untagged ? "untagged" : "tagged",
+		 pvid ? " PVID" : "no PVID");
+
+	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
+		dev_err(smi->dev, "port is DSA or CPU port\n");
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+		int pvid_val = 0;
+
+		dev_info(smi->dev, "add VLAN %04x\n", vid);
+		member |= BIT(port);
+
+		if (untagged)
+			untag |= BIT(port);
+
+		/* To ensure that we have a valid MC entry for this VLAN,
+		 * initialize the port VLAN ID here.
+		 */
+		ret = rtl8366_get_pvid(smi, port, &pvid_val);
+		if (ret < 0) {
+			dev_err(smi->dev, "could not lookup PVID for port %d\n",
+				port);
+			return;
+		}
+		if (pvid_val == 0) {
+			ret = rtl8366_set_pvid(smi, port, vid);
+			if (ret < 0)
+				return;
+		}
+	}
+
+	ret = rtl8366_set_vlan(smi, port, member, untag, 0);
+	if (ret)
+		dev_err(smi->dev,
+			"failed to set up VLAN %04x",
+			vid);
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
+
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_vlan *vlan)
+{
+	struct realtek_smi *smi = ds->priv;
+	u16 vid;
+	int ret;
+
+	dev_info(smi->dev, "del VLAN on port %d\n", port);
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+		int i;
+
+		dev_info(smi->dev, "del VLAN %04x\n", vid);
+
+		for (i = 0; i < smi->num_vlan_mc; i++) {
+			struct rtl8366_vlan_mc vlanmc;
+
+			ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
+			if (ret)
+				return ret;
+
+			if (vid == vlanmc.vid) {
+				/* clear VLAN member configurations */
+				vlanmc.vid = 0;
+				vlanmc.priority = 0;
+				vlanmc.member = 0;
+				vlanmc.untag = 0;
+				vlanmc.fid = 0;
+
+				ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
+				if (ret) {
+					dev_err(smi->dev,
+						"failed to remove VLAN %04x\n",
+						vid);
+					return ret;
+				}
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_del);
+
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+			 uint8_t *data)
+{
+	struct realtek_smi *smi = ds->priv;
+	struct rtl8366_mib_counter *mib;
+	int i;
+
+	if (port >= smi->num_ports)
+		return;
+
+	for (i = 0; i < smi->num_mib_counters; i++) {
+		mib = &smi->mib_counters[i];
+		strncpy(data + i * ETH_GSTRING_LEN,
+			mib->name, ETH_GSTRING_LEN);
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_strings);
+
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	struct realtek_smi *smi = ds->priv;
+
+	/* We only support SS_STATS */
+	if (sset != ETH_SS_STATS)
+		return 0;
+	if (port >= smi->num_ports)
+		return -EINVAL;
+
+	return smi->num_mib_counters;
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);
+
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+	struct realtek_smi *smi = ds->priv;
+	int i;
+	int ret;
+
+	if (port >= smi->num_ports)
+		return;
+
+	for (i = 0; i < smi->num_mib_counters; i++) {
+		struct rtl8366_mib_counter *mib;
+		u64 mibvalue = 0;
+
+		mib = &smi->mib_counters[i];
+		ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue);
+		if (ret) {
+			dev_err(smi->dev, "error reading MIB counter %s\n",
+				mib->name);
+		}
+		data[i] = mibvalue;
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);

drivers/net/dsa/rtl8366rb.c

+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch
+ *
+ * This is a sparsely documented chip, the only viable documentation seems
+ * to be a patched up code drop from the vendor that appear in various
+ * GPL source trees.
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include "realtek-smi.h"
+
+#define RTL8366RB_PORT_NUM_CPU		5
+#define RTL8366RB_NUM_PORTS		6
+#define RTL8366RB_PHY_NO_MAX		4
+#define RTL8366RB_PHY_ADDR_MAX		31
+
+/* Switch Global Configuration register */
+#define RTL8366RB_SGCR				0x0000
+#define RTL8366RB_SGCR_EN_BC_STORM_CTRL		BIT(0)
+#define RTL8366RB_SGCR_MAX_LENGTH(a)		((a) << 4)
+#define RTL8366RB_SGCR_MAX_LENGTH_MASK		RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_MAX_LENGTH_1522		RTL8366RB_SGCR_MAX_LENGTH(0x0)
+#define RTL8366RB_SGCR_MAX_LENGTH_1536		RTL8366RB_SGCR_MAX_LENGTH(0x1)
+#define RTL8366RB_SGCR_MAX_LENGTH_1552		RTL8366RB_SGCR_MAX_LENGTH(0x2)
+#define RTL8366RB_SGCR_MAX_LENGTH_9216		RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_EN_VLAN			BIT(13)
+#define RTL8366RB_SGCR_EN_VLAN_4KTB		BIT(14)
+
+/* Port Enable Control register */
+#define RTL8366RB_PECR				0x0001
+
+/* Switch Security Control registers */
+#define RTL8366RB_SSCR0				0x0002
+#define RTL8366RB_SSCR1				0x0003
+#define RTL8366RB_SSCR2				0x0004
+#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA		BIT(0)
+
+/* Port Mirror Control Register */
+#define RTL8366RB_PMCR				0x0007
+#define RTL8366RB_PMCR_SOURCE_PORT(a)		(a)
+#define RTL8366RB_PMCR_SOURCE_PORT_MASK		0x000f
+#define RTL8366RB_PMCR_MONITOR_PORT(a)		((a) << 4)
+#define RTL8366RB_PMCR_MONITOR_PORT_MASK	0x00f0
+#define RTL8366RB_PMCR_MIRROR_RX		BIT(8)
+#define RTL8366RB_PMCR_MIRROR_TX		BIT(9)
+#define RTL8366RB_PMCR_MIRROR_SPC		BIT(10)
+#define RTL8366RB_PMCR_MIRROR_ISO		BIT(11)
+
+/* bits 0..7 = port 0, bits 8..15 = port 1 */
+#define RTL8366RB_PAACR0		0x0010
+/* bits 0..7 = port 2, bits 8..15 = port 3 */
+#define RTL8366RB_PAACR1		0x0011
+/* bits 0..7 = port 4, bits 8..15 = port 5 */
+#define RTL8366RB_PAACR2		0x0012
+#define RTL8366RB_PAACR_SPEED_10M	0
+#define RTL8366RB_PAACR_SPEED_100M	1
+#define RTL8366RB_PAACR_SPEED_1000M	2
+#define RTL8366RB_PAACR_FULL_DUPLEX	BIT(2)
+#define RTL8366RB_PAACR_LINK_UP		BIT(4)
+#define RTL8366RB_PAACR_TX_PAUSE	BIT(5)
+#define RTL8366RB_PAACR_RX_PAUSE	BIT(6)
+#define RTL8366RB_PAACR_AN		BIT(7)
+
+#define RTL8366RB_PAACR_CPU_PORT	(RTL8366RB_PAACR_SPEED_1000M | \
+					 RTL8366RB_PAACR_FULL_DUPLEX | \
+					 RTL8366RB_PAACR_LINK_UP | \
+					 RTL8366RB_PAACR_TX_PAUSE | \
+					 RTL8366RB_PAACR_RX_PAUSE)
+
+/* bits 0..7 = port 0, bits 8..15 = port 1 */
+#define RTL8366RB_PSTAT0		0x0014
+/* bits 0..7 = port 2, bits 8..15 = port 3 */
+#define RTL8366RB_PSTAT1		0x0015
+/* bits 0..7 = port 4, bits 8..15 = port 5 */
+#define RTL8366RB_PSTAT2		0x0016
+
+#define RTL8366RB_POWER_SAVING_REG	0x0021
+
+/* CPU port control reg */
+#define RTL8368RB_CPU_CTRL_REG		0x0061
+#define RTL8368RB_CPU_PORTS_MSK		0x00FF
+/* Enables inserting custom tag length/type 0x8899 */
+#define RTL8368RB_CPU_INSTAG		BIT(15)
+
+#define RTL8366RB_SMAR0			0x0070 /* bits 0..15 */
+#define RTL8366RB_SMAR1			0x0071 /* bits 16..31 */
+#define RTL8366RB_SMAR2			0x0072 /* bits 32..47 */
+
+#define RTL8366RB_RESET_CTRL_REG		0x0100
+#define RTL8366RB_CHIP_CTRL_RESET_HW		BIT(0)
+#define RTL8366RB_CHIP_CTRL_RESET_SW		BIT(1)
+
+#define RTL8366RB_CHIP_ID_REG			0x0509
+#define RTL8366RB_CHIP_ID_8366			0x5937
+#define RTL8366RB_CHIP_VERSION_CTRL_REG		0x050A
+#define RTL8366RB_CHIP_VERSION_MASK		0xf
+
+/* PHY registers control */
+#define RTL8366RB_PHY_ACCESS_CTRL_REG		0x8000
+#define RTL8366RB_PHY_CTRL_READ			BIT(0)
+#define RTL8366RB_PHY_CTRL_WRITE		0
+#define RTL8366RB_PHY_ACCESS_BUSY_REG		0x8001
+#define RTL8366RB_PHY_INT_BUSY			BIT(0)
+#define RTL8366RB_PHY_EXT_BUSY			BIT(4)
+#define RTL8366RB_PHY_ACCESS_DATA_REG		0x8002
+#define RTL8366RB_PHY_EXT_CTRL_REG		0x8010
+#define RTL8366RB_PHY_EXT_WRDATA_REG		0x8011
+#define RTL8366RB_PHY_EXT_RDDATA_REG		0x8012
+
+#define RTL8366RB_PHY_REG_MASK			0x1f
+#define RTL8366RB_PHY_PAGE_OFFSET		5
+#define RTL8366RB_PHY_PAGE_MASK			(0xf << 5)
+#define RTL8366RB_PHY_NO_OFFSET			9
+#define RTL8366RB_PHY_NO_MASK			(0x1f << 9)
+
+#define RTL8366RB_VLAN_INGRESS_CTRL2_REG	0x037f
+
+/* LED control registers */
+#define RTL8366RB_LED_BLINKRATE_REG		0x0430
+#define RTL8366RB_LED_BLINKRATE_MASK		0x0007
+#define RTL8366RB_LED_BLINKRATE_28MS		0x0000
+#define RTL8366RB_LED_BLINKRATE_56MS		0x0001
+#define RTL8366RB_LED_BLINKRATE_84MS		0x0002
+#define RTL8366RB_LED_BLINKRATE_111MS		0x0003
+#define RTL8366RB_LED_BLINKRATE_222MS		0x0004
+#define RTL8366RB_LED_BLINKRATE_446MS		0x0005
+
+#define RTL8366RB_LED_CTRL_REG			0x0431
+#define RTL8366RB_LED_OFF			0x0
+#define RTL8366RB_LED_DUP_COL			0x1
+#define RTL8366RB_LED_LINK_ACT			0x2
+#define RTL8366RB_LED_SPD1000			0x3
+#define RTL8366RB_LED_SPD100			0x4
+#define RTL8366RB_LED_SPD10			0x5
+#define RTL8366RB_LED_SPD1000_ACT		0x6
+#define RTL8366RB_LED_SPD100_ACT		0x7
+#define RTL8366RB_LED_SPD10_ACT			0x8
+#define RTL8366RB_LED_SPD100_10_ACT		0x9
+#define RTL8366RB_LED_FIBER			0xa
+#define RTL8366RB_LED_AN_FAULT			0xb
+#define RTL8366RB_LED_LINK_RX			0xc
+#define RTL8366RB_LED_LINK_TX			0xd
+#define RTL8366RB_LED_MASTER			0xe
+#define RTL8366RB_LED_FORCE			0xf
+#define RTL8366RB_LED_0_1_CTRL_REG		0x0432
+#define RTL8366RB_LED_1_OFFSET			6
+#define RTL8366RB_LED_2_3_CTRL_REG		0x0433
+#define RTL8366RB_LED_3_OFFSET			6
+
+#define RTL8366RB_MIB_COUNT			33
+#define RTL8366RB_GLOBAL_MIB_COUNT		1
+#define RTL8366RB_MIB_COUNTER_PORT_OFFSET	0x0050
+#define RTL8366RB_MIB_COUNTER_BASE		0x1000
+#define RTL8366RB_MIB_CTRL_REG			0x13F0
+#define RTL8366RB_MIB_CTRL_USER_MASK		0x0FFC
+#define RTL8366RB_MIB_CTRL_BUSY_MASK		BIT(0)
+#define RTL8366RB_MIB_CTRL_RESET_MASK		BIT(1)
+#define RTL8366RB_MIB_CTRL_PORT_RESET(_p)	BIT(2 + (_p))
+#define RTL8366RB_MIB_CTRL_GLOBAL_RESET		BIT(11)
+
+#define RTL8366RB_PORT_VLAN_CTRL_BASE		0x0063
+#define RTL8366RB_PORT_VLAN_CTRL_REG(_p)  \
+		(RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4)
+#define RTL8366RB_PORT_VLAN_CTRL_MASK		0xf
+#define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p)	(4 * ((_p) % 4))
+
+#define RTL8366RB_VLAN_TABLE_READ_BASE		0x018C
+#define RTL8366RB_VLAN_TABLE_WRITE_BASE		0x0185
+
+#define RTL8366RB_TABLE_ACCESS_CTRL_REG		0x0180
+#define RTL8366RB_TABLE_VLAN_READ_CTRL		0x0E01
+#define RTL8366RB_TABLE_VLAN_WRITE_CTRL		0x0F01
+
+#define RTL8366RB_VLAN_MC_BASE(_x)		(0x0020 + (_x) * 3)
+
+#define RTL8366RB_PORT_LINK_STATUS_BASE		0x0014
+#define RTL8366RB_PORT_STATUS_SPEED_MASK	0x0003
+#define RTL8366RB_PORT_STATUS_DUPLEX_MASK	0x0004
+#define RTL8366RB_PORT_STATUS_LINK_MASK		0x0010
+#define RTL8366RB_PORT_STATUS_TXPAUSE_MASK	0x0020
+#define RTL8366RB_PORT_STATUS_RXPAUSE_MASK	0x0040
+#define RTL8366RB_PORT_STATUS_AN_MASK		0x0080
+
+#define RTL8366RB_NUM_VLANS		16
+#define RTL8366RB_NUM_LEDGROUPS		4
+#define RTL8366RB_NUM_VIDS		4096
+#define RTL8366RB_PRIORITYMAX		7
+#define RTL8366RB_FIDMAX		7
+
+#define RTL8366RB_PORT_1		BIT(0) /* In userspace port 0 */
+#define RTL8366RB_PORT_2		BIT(1) /* In userspace port 1 */
+#define RTL8366RB_PORT_3		BIT(2) /* In userspace port 2 */
+#define RTL8366RB_PORT_4		BIT(3) /* In userspace port 3 */
+#define RTL8366RB_PORT_5		BIT(4) /* In userspace port 4 */
+
+#define RTL8366RB_PORT_CPU		BIT(5) /* CPU port */
+
+#define RTL8366RB_PORT_ALL		(RTL8366RB_PORT_1 |	\
+					 RTL8366RB_PORT_2 |	\
+					 RTL8366RB_PORT_3 |	\
+					 RTL8366RB_PORT_4 |	\
+					 RTL8366RB_PORT_5 |	\
+					 RTL8366RB_PORT_CPU)
+
+#define RTL8366RB_PORT_ALL_BUT_CPU	(RTL8366RB_PORT_1 |	\
+					 RTL8366RB_PORT_2 |	\
+					 RTL8366RB_PORT_3 |	\
+					 RTL8366RB_PORT_4 |	\
+					 RTL8366RB_PORT_5)
+
+#define RTL8366RB_PORT_ALL_EXTERNAL	(RTL8366RB_PORT_1 |	\
+					 RTL8366RB_PORT_2 |	\
+					 RTL8366RB_PORT_3 |	\
+					 RTL8366RB_PORT_4)
+
+#define RTL8366RB_PORT_ALL_INTERNAL	 RTL8366RB_PORT_CPU
+
+/* First configuration word per member config, VID and prio */
+#define RTL8366RB_VLAN_VID_MASK		0xfff
+#define RTL8366RB_VLAN_PRIORITY_SHIFT	12
+#define RTL8366RB_VLAN_PRIORITY_MASK	0x7
+/* Second configuration word per member config, member and untagged */
+#define RTL8366RB_VLAN_UNTAG_SHIFT	8
+#define RTL8366RB_VLAN_UNTAG_MASK	0xff
+#define RTL8366RB_VLAN_MEMBER_MASK	0xff
+/* Third config word per member config, STAG currently unused */
+#define RTL8366RB_VLAN_STAG_MBR_MASK	0xff
+#define RTL8366RB_VLAN_STAG_MBR_SHIFT	8
+#define RTL8366RB_VLAN_STAG_IDX_MASK	0x7
+#define RTL8366RB_VLAN_STAG_IDX_SHIFT	5
+#define RTL8366RB_VLAN_FID_MASK		0x7
+
+/* Port ingress bandwidth control */
+#define RTL8366RB_IB_BASE		0x0200
+#define RTL8366RB_IB_REG(pnum)		(RTL8366RB_IB_BASE + (pnum))
+#define RTL8366RB_IB_BDTH_MASK		0x3fff
+#define RTL8366RB_IB_PREIFG		BIT(14)
+
+/* Port egress bandwidth control */
+#define RTL8366RB_EB_BASE		0x02d1
+#define RTL8366RB_EB_REG(pnum)		(RTL8366RB_EB_BASE + (pnum))
+#define RTL8366RB_EB_BDTH_MASK		0x3fff
+#define RTL8366RB_EB_PREIFG_REG		0x02f8
+#define RTL8366RB_EB_PREIFG		BIT(9)
+
+#define RTL8366RB_BDTH_SW_MAX		1048512 /* 1048576? */
+#define RTL8366RB_BDTH_UNIT		64
+#define RTL8366RB_BDTH_REG_DEFAULT	16383
+
+/* QOS */
+#define RTL8366RB_QOS			BIT(15)
+/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */
+#define RTL8366RB_QOS_DEFAULT_PREIFG	1
+
+/* Interrupt handling */
+#define RTL8366RB_INTERRUPT_CONTROL_REG	0x0440
+#define RTL8366RB_INTERRUPT_POLARITY	BIT(0)
+#define RTL8366RB_P4_RGMII_LED		BIT(2)
+#define RTL8366RB_INTERRUPT_MASK_REG	0x0441
+#define RTL8366RB_INTERRUPT_LINK_CHGALL	GENMASK(11, 0)
+#define RTL8366RB_INTERRUPT_ACLEXCEED	BIT(8)
+#define RTL8366RB_INTERRUPT_STORMEXCEED	BIT(9)
+#define RTL8366RB_INTERRUPT_P4_FIBER	BIT(12)
+#define RTL8366RB_INTERRUPT_P4_UTP	BIT(13)
+#define RTL8366RB_INTERRUPT_VALID	(RTL8366RB_INTERRUPT_LINK_CHGALL | \
+					 RTL8366RB_INTERRUPT_ACLEXCEED | \
+					 RTL8366RB_INTERRUPT_STORMEXCEED | \
+					 RTL8366RB_INTERRUPT_P4_FIBER | \
+					 RTL8366RB_INTERRUPT_P4_UTP)
+#define RTL8366RB_INTERRUPT_STATUS_REG	0x0442
+#define RTL8366RB_NUM_INTERRUPT		14 /* 0..13 */
+
+/* bits 0..5 enable force when cleared */
+#define RTL8366RB_MAC_FORCE_CTRL_REG	0x0F11
+
+#define RTL8366RB_OAM_PARSER_REG	0x0F14
+#define RTL8366RB_OAM_MULTIPLEXER_REG	0x0F15
+
+#define RTL8366RB_GREEN_FEATURE_REG	0x0F51
+#define RTL8366RB_GREEN_FEATURE_MSK	0x0007
+#define RTL8366RB_GREEN_FEATURE_TX	BIT(0)
+#define RTL8366RB_GREEN_FEATURE_RX	BIT(2)
+
+static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
+	{ 0,  0, 4, "IfInOctets"				},
+	{ 0,  4, 4, "EtherStatsOctets"				},
+	{ 0,  8, 2, "EtherStatsUnderSizePkts"			},
+	{ 0, 10, 2, "EtherFragments"				},
+	{ 0, 12, 2, "EtherStatsPkts64Octets"			},
+	{ 0, 14, 2, "EtherStatsPkts65to127Octets"		},
+	{ 0, 16, 2, "EtherStatsPkts128to255Octets"		},
+	{ 0, 18, 2, "EtherStatsPkts256to511Octets"		},
+	{ 0, 20, 2, "EtherStatsPkts512to1023Octets"		},
+	{ 0, 22, 2, "EtherStatsPkts1024to1518Octets"		},
+	{ 0, 24, 2, "EtherOversizeStats"			},
+	{ 0, 26, 2, "EtherStatsJabbers"				},
+	{ 0, 28, 2, "IfInUcastPkts"				},
+	{ 0, 30, 2, "EtherStatsMulticastPkts"			},
+	{ 0, 32, 2, "EtherStatsBroadcastPkts"			},
+	{ 0, 34, 2, "EtherStatsDropEvents"			},
+	{ 0, 36, 2, "Dot3StatsFCSErrors"			},
+	{ 0, 38, 2, "Dot3StatsSymbolErrors"			},
+	{ 0, 40, 2, "Dot3InPauseFrames"				},
+	{ 0, 42, 2, "Dot3ControlInUnknownOpcodes"		},
+	{ 0, 44, 4, "IfOutOctets"				},
+	{ 0, 48, 2, "Dot3StatsSingleCollisionFrames"		},
+	{ 0, 50, 2, "Dot3StatMultipleCollisionFrames"		},
+	{ 0, 52, 2, "Dot3sDeferredTransmissions"		},
+	{ 0, 54, 2, "Dot3StatsLateCollisions"			},
+	{ 0, 56, 2, "EtherStatsCollisions"			},
+	{ 0, 58, 2, "Dot3StatsExcessiveCollisions"		},
+	{ 0, 60, 2, "Dot3OutPauseFrames"			},
+	{ 0, 62, 2, "Dot1dBasePortDelayExceededDiscards"	},
+	{ 0, 64, 2, "Dot1dTpPortInDiscards"			},
+	{ 0, 66, 2, "IfOutUcastPkts"				},
+	{ 0, 68, 2, "IfOutMulticastPkts"			},
+	{ 0, 70, 2, "IfOutBroadcastPkts"			},
+};
+
+static int rtl8366rb_get_mib_counter(struct realtek_smi *smi,
+				     int port,
+				     struct rtl8366_mib_counter *mib,
+				     u64 *mibvalue)
+{
+	u32 addr, val;
+	int ret;
+	int i;
+
+	addr = RTL8366RB_MIB_COUNTER_BASE +
+		RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) +
+		mib->offset;
+
+	/* Writing access counter address first
+	 * then ASIC will prepare 64bits counter wait for being retrived
+	 */
+	ret = regmap_write(smi->map, addr, 0); /* Write whatever */
+	if (ret)
+		return ret;
+
+	/* Read MIB control register */
+	ret = regmap_read(smi->map, RTL8366RB_MIB_CTRL_REG, &val);
+	if (ret)
+		return -EIO;
+
+	if (val & RTL8366RB_MIB_CTRL_BUSY_MASK)
+		return -EBUSY;
+
+	if (val & RTL8366RB_MIB_CTRL_RESET_MASK)
+		return -EIO;
+
+	/* Read each individual MIB 16 bits at the time */
+	*mibvalue = 0;
+	for (i = mib->length; i > 0; i--) {
+		ret = regmap_read(smi->map, addr + (i - 1), &val);
+		if (ret)
+			return ret;
+		*mibvalue = (*mibvalue << 16) | (val & 0xFFFF);
+	}
+	return 0;
+}
+
+static u32 rtl8366rb_get_irqmask(struct irq_data *d)
+{
+	int line = irqd_to_hwirq(d);
+	u32 val;
+
+	/* For line interrupts we combine link down in bits
+	 * 6..11 with link up in bits 0..5 into one interrupt.
+	 */
+	if (line < 12)
+		val = BIT(line) | BIT(line + 6);
+	else
+		val = BIT(line);
+	return val;
+}
+
+static void rtl8366rb_mask_irq(struct irq_data *d)
+{
+	struct realtek_smi *smi = irq_data_get_irq_chip_data(d);
+	int ret;
+
+	ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG,
+				 rtl8366rb_get_irqmask(d), 0);
+	if (ret)
+		dev_err(smi->dev, "could not mask IRQ\n");
+}
+
+static void rtl8366rb_unmask_irq(struct irq_data *d)
+{
+	struct realtek_smi *smi = irq_data_get_irq_chip_data(d);
+	int ret;
+
+	ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG,
+				 rtl8366rb_get_irqmask(d),
+				 rtl8366rb_get_irqmask(d));
+	if (ret)
+		dev_err(smi->dev, "could not unmask IRQ\n");
+}
+
+static irqreturn_t rtl8366rb_irq(int irq, void *data)
+{
+	struct realtek_smi *smi = data;
+	u32 stat;
+	int ret;
+
+	/* This clears the IRQ status register */
+	ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG,
+			  &stat);
+	if (ret) {
+		dev_err(smi->dev, "can't read interrupt status\n");
+		return IRQ_NONE;
+	}
+	stat &= RTL8366RB_INTERRUPT_VALID;
+	if (!stat)
+		return IRQ_NONE;
+	while (stat) {
+		int line = __ffs(stat);
+		int child_irq;
+
+		stat &= ~BIT(line);
+		/* For line interrupts we combine link down in bits
+		 * 6..11 with link up in bits 0..5 into one interrupt.
+		 */
+		if (line < 12 && line > 5)
+			line -= 5;
+		child_irq = irq_find_mapping(smi->irqdomain, line);
+		handle_nested_irq(child_irq);
+	}
+	return IRQ_HANDLED;
+}
+
+static struct irq_chip rtl8366rb_irq_chip = {
+	.name = "RTL8366RB",
+	.irq_mask = rtl8366rb_mask_irq,
+	.irq_unmask = rtl8366rb_unmask_irq,
+};
+
+static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, domain->host_data);
+	irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq);
+	irq_set_nested_thread(irq, 1);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+	irq_set_nested_thread(irq, 0);
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops rtl8366rb_irqdomain_ops = {
+	.map = rtl8366rb_irq_map,
+	.unmap = rtl8366rb_irq_unmap,
+	.xlate  = irq_domain_xlate_onecell,
+};
+
+static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
+{
+	struct device_node *intc;
+	unsigned long irq_trig;
+	int irq;
+	int ret;
+	u32 val;
+	int i;
+
+	intc = of_get_child_by_name(smi->dev->of_node, "interrupt-controller");
+	if (!intc) {
+		dev_err(smi->dev, "missing child interrupt-controller node\n");
+		return -EINVAL;
+	}
+	/* RB8366RB IRQs cascade off this one */
+	irq = of_irq_get(intc, 0);
+	if (irq <= 0) {
+		dev_err(smi->dev, "failed to get parent IRQ\n");
+		return irq ? irq : -EINVAL;
+	}
+
+	/* This clears the IRQ status register */
+	ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG,
+			  &val);
+	if (ret) {
+		dev_err(smi->dev, "can't read interrupt status\n");
+		return ret;
+	}
+
+	/* Fetch IRQ edge information from the descriptor */
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+	switch (irq_trig) {
+	case IRQF_TRIGGER_RISING:
+	case IRQF_TRIGGER_HIGH:
+		dev_info(smi->dev, "active high/rising IRQ\n");
+		val = 0;
+		break;
+	case IRQF_TRIGGER_FALLING:
+	case IRQF_TRIGGER_LOW:
+		dev_info(smi->dev, "active low/falling IRQ\n");
+		val = RTL8366RB_INTERRUPT_POLARITY;
+		break;
+	}
+	ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_CONTROL_REG,
+				 RTL8366RB_INTERRUPT_POLARITY,
+				 val);
+	if (ret) {
+		dev_err(smi->dev, "could not configure IRQ polarity\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(smi->dev, irq, NULL,
+					rtl8366rb_irq, IRQF_ONESHOT,
+					"RTL8366RB", smi);
+	if (ret) {
+		dev_err(smi->dev, "unable to request irq: %d\n", ret);
+		return ret;
+	}
+	smi->irqdomain = irq_domain_add_linear(intc,
+					       RTL8366RB_NUM_INTERRUPT,
+					       &rtl8366rb_irqdomain_ops,
+					       smi);
+	if (!smi->irqdomain) {
+		dev_err(smi->dev, "failed to create IRQ domain\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < smi->num_ports; i++)
+		irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
+
+	return 0;
+}
+
+static int rtl8366rb_set_addr(struct realtek_smi *smi)
+{
+	u8 addr[ETH_ALEN];
+	u16 val;
+	int ret;
+
+	eth_random_addr(addr);
+
+	dev_info(smi->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n",
+		 addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+	val = addr[0] << 8 | addr[1];
+	ret = regmap_write(smi->map, RTL8366RB_SMAR0, val);
+	if (ret)
+		return ret;
+	val = addr[2] << 8 | addr[3];
+	ret = regmap_write(smi->map, RTL8366RB_SMAR1, val);
+	if (ret)
+		return ret;
+	val = addr[4] << 8 | addr[5];
+	ret = regmap_write(smi->map, RTL8366RB_SMAR2, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* Found in a vendor driver */
+
+/* For the "version 0" early silicon, appear in most source releases */
+static const u16 rtl8366rb_init_jam_ver_0[] = {
+	0x000B, 0x0001, 0x03A6, 0x0100, 0x03A7, 0x0001, 0x02D1, 0x3FFF,
+	0x02D2, 0x3FFF, 0x02D3, 0x3FFF, 0x02D4, 0x3FFF, 0x02D5, 0x3FFF,
+	0x02D6, 0x3FFF, 0x02D7, 0x3FFF, 0x02D8, 0x3FFF, 0x022B, 0x0688,
+	0x022C, 0x0FAC, 0x03D0, 0x4688, 0x03D1, 0x01F5, 0x0000, 0x0830,
+	0x02F9, 0x0200, 0x02F7, 0x7FFF, 0x02F8, 0x03FF, 0x0080, 0x03E8,
+	0x0081, 0x00CE, 0x0082, 0x00DA, 0x0083, 0x0230, 0xBE0F, 0x2000,
+	0x0231, 0x422A, 0x0232, 0x422A, 0x0233, 0x422A, 0x0234, 0x422A,
+	0x0235, 0x422A, 0x0236, 0x422A, 0x0237, 0x422A, 0x0238, 0x422A,
+	0x0239, 0x422A, 0x023A, 0x422A, 0x023B, 0x422A, 0x023C, 0x422A,
+	0x023D, 0x422A, 0x023E, 0x422A, 0x023F, 0x422A, 0x0240, 0x422A,
+	0x0241, 0x422A, 0x0242, 0x422A, 0x0243, 0x422A, 0x0244, 0x422A,
+	0x0245, 0x422A, 0x0246, 0x422A, 0x0247, 0x422A, 0x0248, 0x422A,
+	0x0249, 0x0146, 0x024A, 0x0146, 0x024B, 0x0146, 0xBE03, 0xC961,
+	0x024D, 0x0146, 0x024E, 0x0146, 0x024F, 0x0146, 0x0250, 0x0146,
+	0xBE64, 0x0226, 0x0252, 0x0146, 0x0253, 0x0146, 0x024C, 0x0146,
+	0x0251, 0x0146, 0x0254, 0x0146, 0xBE62, 0x3FD0, 0x0084, 0x0320,
+	0x0255, 0x0146, 0x0256, 0x0146, 0x0257, 0x0146, 0x0258, 0x0146,
+	0x0259, 0x0146, 0x025A, 0x0146, 0x025B, 0x0146, 0x025C, 0x0146,
+	0x025D, 0x0146, 0x025E, 0x0146, 0x025F, 0x0146, 0x0260, 0x0146,
+	0x0261, 0xA23F, 0x0262, 0x0294, 0x0263, 0xA23F, 0x0264, 0x0294,
+	0x0265, 0xA23F, 0x0266, 0x0294, 0x0267, 0xA23F, 0x0268, 0x0294,
+	0x0269, 0xA23F, 0x026A, 0x0294, 0x026B, 0xA23F, 0x026C, 0x0294,
+	0x026D, 0xA23F, 0x026E, 0x0294, 0x026F, 0xA23F, 0x0270, 0x0294,
+	0x02F5, 0x0048, 0xBE09, 0x0E00, 0xBE1E, 0x0FA0, 0xBE14, 0x8448,
+	0xBE15, 0x1007, 0xBE4A, 0xA284, 0xC454, 0x3F0B, 0xC474, 0x3F0B,
+	0xBE48, 0x3672, 0xBE4B, 0x17A7, 0xBE4C, 0x0B15, 0xBE52, 0x0EDD,
+	0xBE49, 0x8C00, 0xBE5B, 0x785C, 0xBE5C, 0x785C, 0xBE5D, 0x785C,
+	0xBE61, 0x368A, 0xBE63, 0x9B84, 0xC456, 0xCC13, 0xC476, 0xCC13,
+	0xBE65, 0x307D, 0xBE6D, 0x0005, 0xBE6E, 0xE120, 0xBE2E, 0x7BAF,
+};
+
+/* This v1 init sequence is from Belkin F5D8235 U-Boot release */
+static const u16 rtl8366rb_init_jam_ver_1[] = {
+	0x0000, 0x0830, 0x0001, 0x8000, 0x0400, 0x8130, 0xBE78, 0x3C3C,
+	0x0431, 0x5432, 0xBE37, 0x0CE4, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0,
+	0xC44C, 0x1585, 0xC44C, 0x1185, 0xC44C, 0x1585, 0xC46C, 0x1585,
+	0xC46C, 0x1185, 0xC46C, 0x1585, 0xC451, 0x2135, 0xC471, 0x2135,
+	0xBE10, 0x8140, 0xBE15, 0x0007, 0xBE6E, 0xE120, 0xBE69, 0xD20F,
+	0xBE6B, 0x0320, 0xBE24, 0xB000, 0xBE23, 0xFF51, 0xBE22, 0xDF20,
+	0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800, 0xBE24, 0x0000,
+	0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60, 0xBE21, 0x0140,
+	0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000, 0xBE2E, 0x7B7A,
+	0xBE36, 0x0CE4, 0x02F5, 0x0048, 0xBE77, 0x2940, 0x000A, 0x83E0,
+	0xBE79, 0x3C3C, 0xBE00, 0x1340,
+};
+
+/* This v2 init sequence is from Belkin F5D8235 U-Boot release */
+static const u16 rtl8366rb_init_jam_ver_2[] = {
+	0x0450, 0x0000, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432,
+	0xC44F, 0x6250, 0xC46F, 0x6250, 0xC456, 0x0C14, 0xC476, 0x0C14,
+	0xC44C, 0x1C85, 0xC44C, 0x1885, 0xC44C, 0x1C85, 0xC46C, 0x1C85,
+	0xC46C, 0x1885, 0xC46C, 0x1C85, 0xC44C, 0x0885, 0xC44C, 0x0881,
+	0xC44C, 0x0885, 0xC46C, 0x0885, 0xC46C, 0x0881, 0xC46C, 0x0885,
+	0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001,
+	0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6E, 0x0320,
+	0xBE77, 0x2940, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120,
+	0x8000, 0x0001, 0xBE15, 0x1007, 0x8000, 0x0000, 0xBE15, 0x1007,
+	0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160, 0xBE10, 0x8140,
+	0xBE00, 0x1340, 0x0F51, 0x0010,
+};
+
+/* Appears in a DDWRT code dump */
+static const u16 rtl8366rb_init_jam_ver_3[] = {
+	0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432,
+	0x0F51, 0x0017, 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0,
+	0xC456, 0x0C14, 0xC476, 0x0C14, 0xC454, 0x3F8B, 0xC474, 0x3F8B,
+	0xC450, 0x2071, 0xC470, 0x2071, 0xC451, 0x226B, 0xC471, 0x226B,
+	0xC452, 0xA293, 0xC472, 0xA293, 0xC44C, 0x1585, 0xC44C, 0x1185,
+	0xC44C, 0x1585, 0xC46C, 0x1585, 0xC46C, 0x1185, 0xC46C, 0x1585,
+	0xC44C, 0x0185, 0xC44C, 0x0181, 0xC44C, 0x0185, 0xC46C, 0x0185,
+	0xC46C, 0x0181, 0xC46C, 0x0185, 0xBE24, 0xB000, 0xBE23, 0xFF51,
+	0xBE22, 0xDF20, 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800,
+	0xBE24, 0x0000, 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60,
+	0xBE21, 0x0140, 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000,
+	0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001,
+	0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6B, 0x0320,
+	0xBE77, 0x2800, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120,
+	0x8000, 0x0001, 0xBE10, 0x8140, 0x8000, 0x0000, 0xBE10, 0x8140,
+	0xBE15, 0x1007, 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160,
+	0xBE10, 0x8140, 0xBE00, 0x1340, 0x0450, 0x0000, 0x0401, 0x0000,
+};
+
+/* Belkin F5D8235 v1, "belkin,f5d8235-v1" */
+static const u16 rtl8366rb_init_jam_f5d8235[] = {
+	0x0242, 0x02BF, 0x0245, 0x02BF, 0x0248, 0x02BF, 0x024B, 0x02BF,
+	0x024E, 0x02BF, 0x0251, 0x02BF, 0x0254, 0x0A3F, 0x0256, 0x0A3F,
+	0x0258, 0x0A3F, 0x025A, 0x0A3F, 0x025C, 0x0A3F, 0x025E, 0x0A3F,
+	0x0263, 0x007C, 0x0100, 0x0004, 0xBE5B, 0x3500, 0x800E, 0x200F,
+	0xBE1D, 0x0F00, 0x8001, 0x5011, 0x800A, 0xA2F4, 0x800B, 0x17A3,
+	0xBE4B, 0x17A3, 0xBE41, 0x5011, 0xBE17, 0x2100, 0x8000, 0x8304,
+	0xBE40, 0x8304, 0xBE4A, 0xA2F4, 0x800C, 0xA8D5, 0x8014, 0x5500,
+	0x8015, 0x0004, 0xBE4C, 0xA8D5, 0xBE59, 0x0008, 0xBE09, 0x0E00,
+	0xBE36, 0x1036, 0xBE37, 0x1036, 0x800D, 0x00FF, 0xBE4D, 0x00FF,
+};
+
+/* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */
+static const u16 rtl8366rb_init_jam_dgn3500[] = {
+	0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0F51, 0x0017,
+	0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, 0x0450, 0x0000,
+	0x0401, 0x0000, 0x0431, 0x0960,
+};
+
+/* This jam table activates "green ethernet", which means low power mode
+ * and is claimed to detect the cable length and not use more power than
+ * necessary, and the ports should enter power saving mode 10 seconds after
+ * a cable is disconnected. Seems to always be the same.
+ */
+static const u16 rtl8366rb_green_jam[][2] = {
+	{0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7},
+	{0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C},
+	{0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C},
+};
+
+static int rtl8366rb_setup(struct dsa_switch *ds)
+{
+	struct realtek_smi *smi = ds->priv;
+	const u16 *jam_table;
+	u32 chip_ver = 0;
+	u32 chip_id = 0;
+	int jam_size;
+	u32 val;
+	int ret;
+	int i;
+
+	ret = regmap_read(smi->map, RTL8366RB_CHIP_ID_REG, &chip_id);
+	if (ret) {
+		dev_err(smi->dev, "unable to read chip id\n");
+		return ret;
+	}
+
+	switch (chip_id) {
+	case RTL8366RB_CHIP_ID_8366:
+		break;
+	default:
+		dev_err(smi->dev, "unknown chip id (%04x)\n", chip_id);
+		return -ENODEV;
+	}
+
+	ret = regmap_read(smi->map, RTL8366RB_CHIP_VERSION_CTRL_REG,
+			  &chip_ver);
+	if (ret) {
+		dev_err(smi->dev, "unable to read chip version\n");
+		return ret;
+	}
+
+	dev_info(smi->dev, "RTL%04x ver %u chip found\n",
+		 chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK);
+
+	/* Do the init dance using the right jam table */
+	switch (chip_ver) {
+	case 0:
+		jam_table = rtl8366rb_init_jam_ver_0;
+		jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0);
+		break;
+	case 1:
+		jam_table = rtl8366rb_init_jam_ver_1;
+		jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1);
+		break;
+	case 2:
+		jam_table = rtl8366rb_init_jam_ver_2;
+		jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2);
+		break;
+	default:
+		jam_table = rtl8366rb_init_jam_ver_3;
+		jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3);
+		break;
+	}
+
+	/* Special jam tables for special routers
+	 * TODO: are these necessary? Maintainers, please test
+	 * without them, using just the off-the-shelf tables.
+	 */
+	if (of_machine_is_compatible("belkin,f5d8235-v1")) {
+		jam_table = rtl8366rb_init_jam_f5d8235;
+		jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235);
+	}
+	if (of_machine_is_compatible("netgear,dgn3500") ||
+	    of_machine_is_compatible("netgear,dgn3500b")) {
+		jam_table = rtl8366rb_init_jam_dgn3500;
+		jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500);
+	}
+
+	i = 0;
+	while (i < jam_size) {
+		if ((jam_table[i] & 0xBE00) == 0xBE00) {
+			ret = regmap_read(smi->map,
+					  RTL8366RB_PHY_ACCESS_BUSY_REG,
+					  &val);
+			if (ret)
+				return ret;
+			if (!(val & RTL8366RB_PHY_INT_BUSY)) {
+				ret = regmap_write(smi->map,
+						RTL8366RB_PHY_ACCESS_CTRL_REG,
+						RTL8366RB_PHY_CTRL_WRITE);
+				if (ret)
+					return ret;
+			}
+		}
+		dev_dbg(smi->dev, "jam %04x into register %04x\n",
+			jam_table[i + 1],
+			jam_table[i]);
+		ret = regmap_write(smi->map,
+				   jam_table[i],
+				   jam_table[i + 1]);
+		if (ret)
+			return ret;
+		i += 2;
+	}
+
+	/* Set up the "green ethernet" feature */
+	i = 0;
+	while (i < ARRAY_SIZE(rtl8366rb_green_jam)) {
+		ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_BUSY_REG,
+				  &val);
+		if (ret)
+			return ret;
+		if (!(val & RTL8366RB_PHY_INT_BUSY)) {
+			ret = regmap_write(smi->map,
+					   RTL8366RB_PHY_ACCESS_CTRL_REG,
+					   RTL8366RB_PHY_CTRL_WRITE);
+			if (ret)
+				return ret;
+			ret = regmap_write(smi->map,
+					   rtl8366rb_green_jam[i][0],
+					   rtl8366rb_green_jam[i][1]);
+			if (ret)
+				return ret;
+			i++;
+		}
+	}
+	ret = regmap_write(smi->map,
+			   RTL8366RB_GREEN_FEATURE_REG,
+			   (chip_ver == 1) ? 0x0007 : 0x0003);
+	if (ret)
+		return ret;
+
+	/* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */
+	ret = regmap_write(smi->map, 0x0c, 0x240);
+	if (ret)
+		return ret;
+	ret = regmap_write(smi->map, 0x0d, 0x240);
+	if (ret)
+		return ret;
+
+	/* Set some random MAC address */
+	ret = rtl8366rb_set_addr(smi);
+	if (ret)
+		return ret;
+
+	/* Enable CPU port and enable inserting CPU tag
+	 *
+	 * Disabling RTL8368RB_CPU_INSTAG here will change the behaviour
+	 * of the switch totally and it will start talking Realtek RRCP
+	 * internally. It is probably possible to experiment with this,
+	 * but then the kernel needs to understand and handle RRCP first.
+	 */
+	ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG,
+				 0xFFFF,
+				 RTL8368RB_CPU_INSTAG | BIT(smi->cpu_port));
+	if (ret)
+		return ret;
+
+	/* Make sure we default-enable the fixed CPU port */
+	ret = regmap_update_bits(smi->map, RTL8366RB_PECR,
+				 BIT(smi->cpu_port),
+				 0);
+	if (ret)
+		return ret;
+
+	/* Set maximum packet length to 1536 bytes */
+	ret = regmap_update_bits(smi->map, RTL8366RB_SGCR,
+				 RTL8366RB_SGCR_MAX_LENGTH_MASK,
+				 RTL8366RB_SGCR_MAX_LENGTH_1536);
+	if (ret)
+		return ret;
+
+	/* Enable learning for all ports */
+	ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0);
+	if (ret)
+		return ret;
+
+	/* Enable auto ageing for all ports */
+	ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0);
+	if (ret)
+		return ret;
+
+	/* Discard VLAN tagged packets if the port is not a member of
+	 * the VLAN with which the packets is associated.
+	 */
+	ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+			   RTL8366RB_PORT_ALL);
+	if (ret)
+		return ret;
+
+	/* Don't drop packets whose DA has not been learned */
+	ret = regmap_update_bits(smi->map, RTL8366RB_SSCR2,
+				 RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0);
+	if (ret)
+		return ret;
+
+	/* Set blinking, TODO: make this configurable */
+	ret = regmap_update_bits(smi->map, RTL8366RB_LED_BLINKRATE_REG,
+				 RTL8366RB_LED_BLINKRATE_MASK,
+				 RTL8366RB_LED_BLINKRATE_56MS);
+	if (ret)
+		return ret;
+
+	/* Set up LED activity:
+	 * Each port has 4 LEDs, we configure all ports to the same
+	 * behaviour (no individual config) but we can set up each
+	 * LED separately.
+	 */
+	if (smi->leds_disabled) {
+		/* Turn everything off */
+		regmap_update_bits(smi->map,
+				   RTL8366RB_LED_0_1_CTRL_REG,
+				   0x0FFF, 0);
+		regmap_update_bits(smi->map,
+				   RTL8366RB_LED_2_3_CTRL_REG,
+				   0x0FFF, 0);
+		regmap_update_bits(smi->map,
+				   RTL8366RB_INTERRUPT_CONTROL_REG,
+				   RTL8366RB_P4_RGMII_LED,
+				   0);
+		val = RTL8366RB_LED_OFF;
+	} else {
+		/* TODO: make this configurable per LED */
+		val = RTL8366RB_LED_FORCE;
+	}
+	for (i = 0; i < 4; i++) {
+		ret = regmap_update_bits(smi->map,
+					 RTL8366RB_LED_CTRL_REG,
+					 0xf << (i * 4),
+					 val << (i * 4));
+		if (ret)
+			return ret;
+	}
+
+	ret = rtl8366_init_vlan(smi);
+	if (ret)
+		return ret;
+
+	ret = rtl8366rb_setup_cascaded_irq(smi);
+	if (ret)
+		dev_info(smi->dev, "no interrupt support\n");
+
+	ret = realtek_smi_setup_mdio(smi);
+	if (ret) {
+		dev_info(smi->dev, "could not set up MDIO bus\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds,
+						      int port)
+{
+	/* For now, the RTL switches are handled without any custom tags.
+	 *
+	 * It is possible to turn on "custom tags" by removing the
+	 * RTL8368RB_CPU_INSTAG flag when enabling the port but what it
+	 * does is unfamiliar to DSA: ethernet frames of type 8899, the Realtek
+	 * Remote Control Protocol (RRCP) start to appear on the CPU port of
+	 * the device. So this is not the ordinary few extra bytes in the
+	 * frame. Instead it appears that the switch starts to talk Realtek
+	 * RRCP internally which means a pretty complex RRCP implementation
+	 * decoding and responding the RRCP protocol is needed to exploit this.
+	 *
+	 * The OpenRRCP project (dormant since 2009) have reverse-egineered
+	 * parts of the protocol.
+	 */
+	return DSA_TAG_PROTO_NONE;
+}
+
+static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port,
+				  struct phy_device *phydev)
+{
+	struct realtek_smi *smi = ds->priv;
+	int ret;
+
+	if (port != smi->cpu_port)
+		return;
+
+	dev_info(smi->dev, "adjust link on CPU port (%d)\n", port);
+
+	/* Force the fixed CPU port into 1Gbit mode, no autonegotiation */
+	ret = regmap_update_bits(smi->map, RTL8366RB_MAC_FORCE_CTRL_REG,
+				 BIT(port), BIT(port));
+	if (ret)
+		return;
+
+	ret = regmap_update_bits(smi->map, RTL8366RB_PAACR2,
+				 0xFF00U,
+				 RTL8366RB_PAACR_CPU_PORT << 8);
+	if (ret)
+		return;
+
+	/* Enable the CPU port */
+	ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port),
+				 0);
+	if (ret)
+		return;
+}
+
+static void rb8366rb_set_port_led(struct realtek_smi *smi,
+				  int port, bool enable)
+{
+	u16 val = enable ? 0x3f : 0;
+	int ret;
+
+	if (smi->leds_disabled)
+		return;
+
+	switch (port) {
+	case 0:
+		ret = regmap_update_bits(smi->map,
+					 RTL8366RB_LED_0_1_CTRL_REG,
+					 0x3F, val);
+		break;
+	case 1:
+		ret = regmap_update_bits(smi->map,
+					 RTL8366RB_LED_0_1_CTRL_REG,
+					 0x3F << RTL8366RB_LED_1_OFFSET,
+					 val << RTL8366RB_LED_1_OFFSET);
+		break;
+	case 2:
+		ret = regmap_update_bits(smi->map,
+					 RTL8366RB_LED_2_3_CTRL_REG,
+					 0x3F, val);
+		break;
+	case 3:
+		ret = regmap_update_bits(smi->map,
+					 RTL8366RB_LED_2_3_CTRL_REG,
+					 0x3F << RTL8366RB_LED_3_OFFSET,
+					 val << RTL8366RB_LED_3_OFFSET);
+		break;
+	case 4:
+		ret = regmap_update_bits(smi->map,
+					 RTL8366RB_INTERRUPT_CONTROL_REG,
+					 RTL8366RB_P4_RGMII_LED,
+					 enable ? RTL8366RB_P4_RGMII_LED : 0);
+		break;
+	default:
+		dev_err(smi->dev, "no LED for port %d\n", port);
+		return;
+	}
+	if (ret)
+		dev_err(smi->dev, "error updating LED on port %d\n", port);
+}
+
+static int
+rtl8366rb_port_enable(struct dsa_switch *ds, int port,
+		      struct phy_device *phy)
+{
+	struct realtek_smi *smi = ds->priv;
+	int ret;
+
+	dev_dbg(smi->dev, "enable port %d\n", port);
+	ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port),
+				 0);
+	if (ret)
+		return ret;
+
+	rb8366rb_set_port_led(smi, port, true);
+	return 0;
+}
+
+static void
+rtl8366rb_port_disable(struct dsa_switch *ds, int port,
+		       struct phy_device *phy)
+{
+	struct realtek_smi *smi = ds->priv;
+	int ret;
+
+	dev_dbg(smi->dev, "disable port %d\n", port);
+	ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port),
+				 BIT(port));
+	if (ret)
+		return;
+
+	rb8366rb_set_port_led(smi, port, false);
+}
+
+static int rtl8366rb_get_vlan_4k(struct realtek_smi *smi, u32 vid,
+				 struct rtl8366_vlan_4k *vlan4k)
+{
+	u32 data[3];
+	int ret;
+	int i;
+
+	memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
+
+	if (vid >= RTL8366RB_NUM_VIDS)
+		return -EINVAL;
+
+	/* write VID */
+	ret = regmap_write(smi->map, RTL8366RB_VLAN_TABLE_WRITE_BASE,
+			   vid & RTL8366RB_VLAN_VID_MASK);
+	if (ret)
+		return ret;
+
+	/* write table access control word */
+	ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
+			   RTL8366RB_TABLE_VLAN_READ_CTRL);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 3; i++) {
+		ret = regmap_read(smi->map,
+				  RTL8366RB_VLAN_TABLE_READ_BASE + i,
+				  &data[i]);
+		if (ret)
+			return ret;
+	}
+
+	vlan4k->vid = vid;
+	vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
+			RTL8366RB_VLAN_UNTAG_MASK;
+	vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
+	vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
+
+	return 0;
+}
+
+static int rtl8366rb_set_vlan_4k(struct realtek_smi *smi,
+				 const struct rtl8366_vlan_4k *vlan4k)
+{
+	u32 data[3];
+	int ret;
+	int i;
+
+	if (vlan4k->vid >= RTL8366RB_NUM_VIDS ||
+	    vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK ||
+	    vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK ||
+	    vlan4k->fid > RTL8366RB_FIDMAX)
+		return -EINVAL;
+
+	data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK;
+	data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) |
+		  ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
+			RTL8366RB_VLAN_UNTAG_SHIFT);
+	data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK;
+
+	for (i = 0; i < 3; i++) {
+		ret = regmap_write(smi->map,
+				   RTL8366RB_VLAN_TABLE_WRITE_BASE + i,
+				   data[i]);
+		if (ret)
+			return ret;
+	}
+
+	/* write table access control word */
+	ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
+			   RTL8366RB_TABLE_VLAN_WRITE_CTRL);
+
+	return ret;
+}
+
+static int rtl8366rb_get_vlan_mc(struct realtek_smi *smi, u32 index,
+				 struct rtl8366_vlan_mc *vlanmc)
+{
+	u32 data[3];
+	int ret;
+	int i;
+
+	memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
+
+	if (index >= RTL8366RB_NUM_VLANS)
+		return -EINVAL;
+
+	for (i = 0; i < 3; i++) {
+		ret = regmap_read(smi->map,
+				  RTL8366RB_VLAN_MC_BASE(index) + i,
+				  &data[i]);
+		if (ret)
+			return ret;
+	}
+
+	vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK;
+	vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) &
+		RTL8366RB_VLAN_PRIORITY_MASK;
+	vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
+		RTL8366RB_VLAN_UNTAG_MASK;
+	vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
+	vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
+
+	return 0;
+}
+
+static int rtl8366rb_set_vlan_mc(struct realtek_smi *smi, u32 index,
+				 const struct rtl8366_vlan_mc *vlanmc)
+{
+	u32 data[3];
+	int ret;
+	int i;
+
+	if (index >= RTL8366RB_NUM_VLANS ||
+	    vlanmc->vid >= RTL8366RB_NUM_VIDS ||
+	    vlanmc->priority > RTL8366RB_PRIORITYMAX ||
+	    vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK ||
+	    vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK ||
+	    vlanmc->fid > RTL8366RB_FIDMAX)
+		return -EINVAL;
+
+	data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) |
+		  ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) <<
+			RTL8366RB_VLAN_PRIORITY_SHIFT);
+	data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) |
+		  ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
+			RTL8366RB_VLAN_UNTAG_SHIFT);
+	data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK;
+
+	for (i = 0; i < 3; i++) {
+		ret = regmap_write(smi->map,
+				   RTL8366RB_VLAN_MC_BASE(index) + i,
+				   data[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_get_mc_index(struct realtek_smi *smi, int port, int *val)
+{
+	u32 data;
+	int ret;
+
+	if (port >= smi->num_ports)
+		return -EINVAL;
+
+	ret = regmap_read(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+			  &data);
+	if (ret)
+		return ret;
+
+	*val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) &
+		RTL8366RB_PORT_VLAN_CTRL_MASK;
+
+	return 0;
+}
+
+static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
+{
+	if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS)
+		return -EINVAL;
+
+	return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+				RTL8366RB_PORT_VLAN_CTRL_MASK <<
+					RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
+				(index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
+					RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
+}
+
+static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
+{
+	unsigned int max = RTL8366RB_NUM_VLANS;
+
+	if (smi->vlan4k_enabled)
+		max = RTL8366RB_NUM_VIDS - 1;
+
+	if (vlan == 0 || vlan >= max)
+		return false;
+
+	return true;
+}
+
+static int rtl8366rb_enable_vlan(struct realtek_smi *smi, bool enable)
+{
+	dev_dbg(smi->dev, "%s VLAN\n", enable ? "enable" : "disable");
+	return regmap_update_bits(smi->map,
+				  RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
+				  enable ? RTL8366RB_SGCR_EN_VLAN : 0);
+}
+
+static int rtl8366rb_enable_vlan4k(struct realtek_smi *smi, bool enable)
+{
+	dev_dbg(smi->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
+	return regmap_update_bits(smi->map, RTL8366RB_SGCR,
+				  RTL8366RB_SGCR_EN_VLAN_4KTB,
+				  enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
+}
+
+static int rtl8366rb_phy_read(struct realtek_smi *smi, int phy, int regnum)
+{
+	u32 val;
+	u32 reg;
+	int ret;
+
+	if (phy > RTL8366RB_PHY_NO_MAX)
+		return -EINVAL;
+
+	ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG,
+			   RTL8366RB_PHY_CTRL_READ);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
+
+	ret = regmap_write(smi->map, reg, 0);
+	if (ret) {
+		dev_err(smi->dev,
+			"failed to write PHY%d reg %04x @ %04x, ret %d\n",
+			phy, regnum, reg, ret);
+		return ret;
+	}
+
+	ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_DATA_REG, &val);
+	if (ret)
+		return ret;
+
+	dev_dbg(smi->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n",
+		phy, regnum, reg, val);
+
+	return val;
+}
+
+static int rtl8366rb_phy_write(struct realtek_smi *smi, int phy, int regnum,
+			       u16 val)
+{
+	u32 reg;
+	int ret;
+
+	if (phy > RTL8366RB_PHY_NO_MAX)
+		return -EINVAL;
+
+	ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG,
+			   RTL8366RB_PHY_CTRL_WRITE);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
+
+	dev_dbg(smi->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n",
+		phy, regnum, reg, val);
+
+	ret = regmap_write(smi->map, reg, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rtl8366rb_reset_chip(struct realtek_smi *smi)
+{
+	int timeout = 10;
+	u32 val;
+	int ret;
+
+	realtek_smi_write_reg_noack(smi, RTL8366RB_RESET_CTRL_REG,
+				    RTL8366RB_CHIP_CTRL_RESET_HW);
+	do {
+		usleep_range(20000, 25000);
+		ret = regmap_read(smi->map, RTL8366RB_RESET_CTRL_REG, &val);
+		if (ret)
+			return ret;
+
+		if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW))
+			break;
+	} while (--timeout);
+
+	if (!timeout) {
+		dev_err(smi->dev, "timeout waiting for the switch to reset\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_detect(struct realtek_smi *smi)
+{
+	struct device *dev = smi->dev;
+	int ret;
+	u32 val;
+
+	/* Detect device */
+	ret = regmap_read(smi->map, 0x5c, &val);
+	if (ret) {
+		dev_err(dev, "can't get chip ID (%d)\n", ret);
+		return ret;
+	}
+
+	switch (val) {
+	case 0x6027:
+		dev_info(dev, "found an RTL8366S switch\n");
+		dev_err(dev, "this switch is not yet supported, submit patches!\n");
+		return -ENODEV;
+	case 0x5937:
+		dev_info(dev, "found an RTL8366RB switch\n");
+		smi->cpu_port = RTL8366RB_PORT_NUM_CPU;
+		smi->num_ports = RTL8366RB_NUM_PORTS;
+		smi->num_vlan_mc = RTL8366RB_NUM_VLANS;
+		smi->mib_counters = rtl8366rb_mib_counters;
+		smi->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters);
+		break;
+	default:
+		dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n",
+			 val);
+		break;
+	}
+
+	ret = rtl8366rb_reset_chip(smi);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct dsa_switch_ops rtl8366rb_switch_ops = {
+	.get_tag_protocol = rtl8366_get_tag_protocol,
+	.setup = rtl8366rb_setup,
+	.adjust_link = rtl8366rb_adjust_link,
+	.get_strings = rtl8366_get_strings,
+	.get_ethtool_stats = rtl8366_get_ethtool_stats,
+	.get_sset_count = rtl8366_get_sset_count,
+	.port_vlan_filtering = rtl8366_vlan_filtering,
+	.port_vlan_prepare = rtl8366_vlan_prepare,
+	.port_vlan_add = rtl8366_vlan_add,
+	.port_vlan_del = rtl8366_vlan_del,
+	.port_enable = rtl8366rb_port_enable,
+	.port_disable = rtl8366rb_port_disable,
+};
+
+static const struct realtek_smi_ops rtl8366rb_smi_ops = {
+	.detect		= rtl8366rb_detect,
+	.get_vlan_mc	= rtl8366rb_get_vlan_mc,
+	.set_vlan_mc	= rtl8366rb_set_vlan_mc,
+	.get_vlan_4k	= rtl8366rb_get_vlan_4k,
+	.set_vlan_4k	= rtl8366rb_set_vlan_4k,
+	.get_mc_index	= rtl8366rb_get_mc_index,
+	.set_mc_index	= rtl8366rb_set_mc_index,
+	.get_mib_counter = rtl8366rb_get_mib_counter,
+	.is_vlan_valid	= rtl8366rb_is_vlan_valid,
+	.enable_vlan	= rtl8366rb_enable_vlan,
+	.enable_vlan4k	= rtl8366rb_enable_vlan4k,
+	.phy_read	= rtl8366rb_phy_read,
+	.phy_write	= rtl8366rb_phy_write,
+};
+
+const struct realtek_smi_variant rtl8366rb_variant = {
+	.ds_ops = &rtl8366rb_switch_ops,
+	.ops = &rtl8366rb_smi_ops,
+	.clk_delay = 10,
+	.cmd_read = 0xa9,
+	.cmd_write = 0xa8,
+};
+EXPORT_SYMBOL_GPL(rtl8366rb_variant);