Merge tag 'zxdrm-4.10' of...

Merge tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next

ZTE zxdrm driver support for 4.10:

This is the initial ZTE VOU display controller DRM/KMS driver.  There
are still some features to be added, like overlay plane, scaling, and
more output devices support.  But it's already useful with dual CRTCs
and HDMI display working.

[airlied: use drm_format_plane_cpp instead of legacy api]
* tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  MAINTAINERS: add an entry for ZTE ZX DRM driver
  drm: zte: add initial vou drm driver
  dt-bindings: add bindings doc for ZTE VOU display controller

Documentation/devicetree/bindings/display/zte,vou.txt

+ZTE VOU Display Controller
+
+This is a display controller found on ZTE ZX296718 SoC.  It includes multiple
+Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks
+handling scaling, color space conversion etc.  VOU also integrates the support
+for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD.
+
+* Master VOU node
+
+It must be the parent node of all the sub-device nodes.
+
+Required properties:
+ - compatible: should be "zte,zx296718-vou"
+ - #address-cells: should be <1>
+ - #size-cells: should be <1>
+ - ranges: list of address translations between VOU and sub-devices
+
+* VOU DPC device
+
+Required properties:
+ - compatible: should be "zte,zx296718-dpc"
+ - reg: Physical base address and length of DPC register regions, one for each
+   entry in 'reg-names'
+ - reg-names: The names of register regions. The following regions are required:
+	"osd"
+	"timing_ctrl"
+	"dtrc"
+	"vou_ctrl"
+	"otfppu"
+ - interrupts: VOU DPC interrupt number to CPU
+ - clocks: A list of phandle + clock-specifier pairs, one for each entry
+   in 'clock-names'
+ - clock-names: A list of clock names.  The following clocks are required:
+	"aclk"
+	"ppu_wclk"
+	"main_wclk"
+	"aux_wclk"
+
+* HDMI output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-hdmi"
+ - reg: Physical base address and length of the HDMI device IO region
+ - interrupts : HDMI interrupt number to CPU
+ - clocks: A list of phandle + clock-specifier pairs, one for each entry
+   in 'clock-names'
+ - clock-names: A list of clock names.  The following clocks are required:
+	"osc_cec"
+	"osc_clk"
+	"xclk"
+
+Example:
+
+vou: vou@1440000 {
+	compatible = "zte,zx296718-vou";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x1440000 0x10000>;
+
+	dpc: dpc@0 {
+		compatible = "zte,zx296718-dpc";
+		reg = <0x0000 0x1000>, <0x1000 0x1000>,
+		      <0x5000 0x1000>, <0x6000 0x1000>,
+		      <0xa000 0x1000>;
+		reg-names = "osd", "timing_ctrl",
+			    "dtrc", "vou_ctrl",
+			    "otfppu";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
+			 <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
+		clock-names = "aclk", "ppu_wclk",
+			      "main_wclk", "aux_wclk";
+	};
+
+	hdmi: hdmi@c000 {
+		compatible = "zte,zx296718-hdmi";
+		reg = <0xc000 0x4000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&topcrm HDMI_OSC_CEC>,
+			 <&topcrm HDMI_OSC_CLK>,
+			 <&topcrm HDMI_XCLK>;
+		clock-names = "osc_cec", "osc_clk", "xclk";
+	};
+};

MAINTAINERS

@@ -4298,6 +4298,13 @@ S:	Maintained
 F:	drivers/gpu/drm/tilcdc/
 F:	Documentation/devicetree/bindings/display/tilcdc/
 
+DRM DRIVERS FOR ZTE ZX
+M:	Shawn Guo <shawnguo@kernel.org>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	drivers/gpu/drm/zte/
+F:	Documentation/devicetree/bindings/display/zte,vou.txt
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org

drivers/gpu/drm/Kconfig

@@ -237,6 +237,8 @@ source "drivers/gpu/drm/hisilicon/Kconfig"
 
 source "drivers/gpu/drm/mediatek/Kconfig"
 
+source "drivers/gpu/drm/zte/Kconfig"
+
 # Keep legacy drivers last
 
 menuconfig DRM_LEGACY

drivers/gpu/drm/Makefile

@@ -87,3 +87,4 @@ obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
 obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
 obj-$(CONFIG_DRM_ARCPGU)+= arc/
 obj-y			+= hisilicon/
+obj-$(CONFIG_DRM_ZTE)	+= zte/

drivers/gpu/drm/zte/Kconfig

+config DRM_ZTE
+	tristate "DRM Support for ZTE SoCs"
+	depends on DRM && ARCH_ZX
+	select DRM_KMS_CMA_HELPER
+	select DRM_KMS_FB_HELPER
+	select DRM_KMS_HELPER
+	help
+	  Choose this option to enable DRM on ZTE ZX SoCs.

drivers/gpu/drm/zte/Makefile

+zxdrm-y := \
+	zx_drm_drv.o \
+	zx_hdmi.o \
+	zx_plane.o \
+	zx_vou.o
+
+obj-$(CONFIG_DRM_ZTE) += zxdrm.o

drivers/gpu/drm/zte/zx_drm_drv.c

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+
+#include "zx_drm_drv.h"
+#include "zx_vou.h"
+
+struct zx_drm_private {
+	struct drm_fbdev_cma *fbdev;
+};
+
+static void zx_drm_fb_output_poll_changed(struct drm_device *drm)
+{
+	struct zx_drm_private *priv = drm->dev_private;
+
+	drm_fbdev_cma_hotplug_event(priv->fbdev);
+}
+
+static const struct drm_mode_config_funcs zx_drm_mode_config_funcs = {
+	.fb_create = drm_fb_cma_create,
+	.output_poll_changed = zx_drm_fb_output_poll_changed,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static void zx_drm_lastclose(struct drm_device *drm)
+{
+	struct zx_drm_private *priv = drm->dev_private;
+
+	drm_fbdev_cma_restore_mode(priv->fbdev);
+}
+
+static const struct file_operations zx_drm_fops = {
+	.owner = THIS_MODULE,
+	.open = drm_open,
+	.release = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
+	.poll = drm_poll,
+	.read = drm_read,
+	.llseek = noop_llseek,
+	.mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver zx_drm_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
+			   DRIVER_ATOMIC,
+	.lastclose = zx_drm_lastclose,
+	.get_vblank_counter = drm_vblank_no_hw_counter,
+	.enable_vblank = zx_vou_enable_vblank,
+	.disable_vblank = zx_vou_disable_vblank,
+	.gem_free_object = drm_gem_cma_free_object,
+	.gem_vm_ops = &drm_gem_cma_vm_ops,
+	.dumb_create = drm_gem_cma_dumb_create,
+	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
+	.dumb_destroy = drm_gem_dumb_destroy,
+	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+	.gem_prime_export = drm_gem_prime_export,
+	.gem_prime_import = drm_gem_prime_import,
+	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap = drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap = drm_gem_cma_prime_mmap,
+	.fops = &zx_drm_fops,
+	.name = "zx-vou",
+	.desc = "ZTE VOU Controller DRM",
+	.date = "20160811",
+	.major = 1,
+	.minor = 0,
+};
+
+static int zx_drm_bind(struct device *dev)
+{
+	struct drm_device *drm;
+	struct zx_drm_private *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	drm = drm_dev_alloc(&zx_drm_driver, dev);
+	if (!drm)
+		return -ENOMEM;
+
+	drm->dev_private = priv;
+	dev_set_drvdata(dev, drm);
+
+	drm_mode_config_init(drm);
+	drm->mode_config.min_width = 16;
+	drm->mode_config.min_height = 16;
+	drm->mode_config.max_width = 4096;
+	drm->mode_config.max_height = 4096;
+	drm->mode_config.funcs = &zx_drm_mode_config_funcs;
+
+	ret = component_bind_all(dev, drm);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to bind all components: %d\n", ret);
+		goto out_unregister;
+	}
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "failed to init vblank: %d\n", ret);
+		goto out_unbind;
+	}
+
+	/*
+	 * We will manage irq handler on our own.  In this case, irq_enabled
+	 * need to be true for using vblank core support.
+	 */
+	drm->irq_enabled = true;
+
+	drm_mode_config_reset(drm);
+	drm_kms_helper_poll_init(drm);
+
+	priv->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
+					 drm->mode_config.num_connector);
+	if (IS_ERR(priv->fbdev)) {
+		ret = PTR_ERR(priv->fbdev);
+		DRM_DEV_ERROR(dev, "failed to init cma fbdev: %d\n", ret);
+		priv->fbdev = NULL;
+		goto out_poll_fini;
+	}
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		goto out_fbdev_fini;
+
+	return 0;
+
+out_fbdev_fini:
+	if (priv->fbdev) {
+		drm_fbdev_cma_fini(priv->fbdev);
+		priv->fbdev = NULL;
+	}
+out_poll_fini:
+	drm_kms_helper_poll_fini(drm);
+	drm_mode_config_cleanup(drm);
+	drm_vblank_cleanup(drm);
+out_unbind:
+	component_unbind_all(dev, drm);
+out_unregister:
+	dev_set_drvdata(dev, NULL);
+	drm->dev_private = NULL;
+	drm_dev_unref(drm);
+	return ret;
+}
+
+static void zx_drm_unbind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+	struct zx_drm_private *priv = drm->dev_private;
+
+	drm_dev_unregister(drm);
+	if (priv->fbdev) {
+		drm_fbdev_cma_fini(priv->fbdev);
+		priv->fbdev = NULL;
+	}
+	drm_kms_helper_poll_fini(drm);
+	drm_mode_config_cleanup(drm);
+	drm_vblank_cleanup(drm);
+	component_unbind_all(dev, drm);
+	dev_set_drvdata(dev, NULL);
+	drm->dev_private = NULL;
+	drm_dev_unref(drm);
+}
+
+static const struct component_master_ops zx_drm_master_ops = {
+	.bind = zx_drm_bind,
+	.unbind = zx_drm_unbind,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+static int zx_drm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *parent = dev->of_node;
+	struct device_node *child;
+	struct component_match *match = NULL;
+	int ret;
+
+	ret = of_platform_populate(parent, NULL, NULL, dev);
+	if (ret)
+		return ret;
+
+	for_each_available_child_of_node(parent, child) {
+		component_match_add(dev, &match, compare_of, child);
+		of_node_put(child);
+	}
+
+	return component_master_add_with_match(dev, &zx_drm_master_ops, match);
+}
+
+static int zx_drm_remove(struct platform_device *pdev)
+{
+	component_master_del(&pdev->dev, &zx_drm_master_ops);
+	return 0;
+}
+
+static const struct of_device_id zx_drm_of_match[] = {
+	{ .compatible = "zte,zx296718-vou", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, zx_drm_of_match);
+
+static struct platform_driver zx_drm_platform_driver = {
+	.probe = zx_drm_probe,
+	.remove = zx_drm_remove,
+	.driver	= {
+		.name = "zx-drm",
+		.of_match_table	= zx_drm_of_match,
+	},
+};
+
+static struct platform_driver *drivers[] = {
+	&zx_crtc_driver,
+	&zx_hdmi_driver,
+	&zx_drm_platform_driver,
+};
+
+static int zx_drm_init(void)
+{
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_init(zx_drm_init);
+
+static void zx_drm_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_exit(zx_drm_exit);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("ZTE ZX VOU DRM driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/zte/zx_drm_drv.h

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_DRM_DRV_H__
+#define __ZX_DRM_DRV_H__
+
+extern struct platform_driver zx_crtc_driver;
+extern struct platform_driver zx_hdmi_driver;
+
+static inline u32 zx_readl(void __iomem *reg)
+{
+	return readl_relaxed(reg);
+}
+
+static inline void zx_writel(void __iomem *reg, u32 val)
+{
+	writel_relaxed(val, reg);
+}
+
+static inline void zx_writel_mask(void __iomem *reg, u32 mask, u32 val)
+{
+	u32 tmp;
+
+	tmp = zx_readl(reg);
+	tmp = (tmp & ~mask) | (val & mask);
+	zx_writel(reg, tmp);
+}
+
+#endif /* __ZX_DRM_DRV_H__ */

drivers/gpu/drm/zte/zx_hdmi.c

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+
+#include "zx_hdmi_regs.h"
+#include "zx_vou.h"
+
+#define ZX_HDMI_INFOFRAME_SIZE		31
+#define DDC_SEGMENT_ADDR		0x30
+
+struct zx_hdmi_i2c {
+	struct i2c_adapter adap;
+	struct mutex lock;
+};
+
+struct zx_hdmi {
+	struct drm_connector connector;
+	struct drm_encoder encoder;
+	struct zx_hdmi_i2c *ddc;
+	struct device *dev;
+	struct drm_device *drm;
+	void __iomem *mmio;
+	struct clk *cec_clk;
+	struct clk *osc_clk;
+	struct clk *xclk;
+	bool sink_is_hdmi;
+	bool sink_has_audio;
+	const struct vou_inf *inf;
+};
+
+#define to_zx_hdmi(x) container_of(x, struct zx_hdmi, x)
+
+static const struct vou_inf vou_inf_hdmi = {
+	.id = VOU_HDMI,
+	.data_sel = VOU_YUV444,
+	.clocks_en_bits = BIT(24) | BIT(18) | BIT(6),
+	.clocks_sel_bits = BIT(13) | BIT(2),
+};
+
+static inline u8 hdmi_readb(struct zx_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->mmio + offset * 4);
+}
+
+static inline void hdmi_writeb(struct zx_hdmi *hdmi, u16 offset, u8 val)
+{
+	writel_relaxed(val, hdmi->mmio + offset * 4);
+}
+
+static inline void hdmi_writeb_mask(struct zx_hdmi *hdmi, u16 offset,
+				    u8 mask, u8 val)
+{
+	u8 tmp;
+
+	tmp = hdmi_readb(hdmi, offset);
+	tmp = (tmp & ~mask) | (val & mask);
+	hdmi_writeb(hdmi, offset, tmp);
+}
+
+static int zx_hdmi_infoframe_trans(struct zx_hdmi *hdmi,
+				   union hdmi_infoframe *frame, u8 fsel)
+{
+	u8 buffer[ZX_HDMI_INFOFRAME_SIZE];
+	int num;
+	int i;
+
+	hdmi_writeb(hdmi, TPI_INFO_FSEL, fsel);
+
+	num = hdmi_infoframe_pack(frame, buffer, ZX_HDMI_INFOFRAME_SIZE);
+	if (num < 0) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to pack infoframe: %d\n", num);
+		return num;
+	}
+
+	for (i = 0; i < num; i++)
+		hdmi_writeb(hdmi, TPI_INFO_B0 + i, buffer[i]);
+
+	hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_RPT,
+			 TPI_INFO_TRANS_RPT);
+	hdmi_writeb_mask(hdmi, TPI_INFO_EN, TPI_INFO_TRANS_EN,
+			 TPI_INFO_TRANS_EN);
+
+	return num;
+}
+
+static int zx_hdmi_config_video_vsi(struct zx_hdmi *hdmi,
+				    struct drm_display_mode *mode)
+{
+	union hdmi_infoframe frame;
+	int ret;
+
+	ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
+							  mode);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get vendor infoframe: %d\n",
+			      ret);
+		return ret;
+	}
+
+	return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_VSIF);
+}
+
+static int zx_hdmi_config_video_avi(struct zx_hdmi *hdmi,
+				    struct drm_display_mode *mode)
+{
+	union hdmi_infoframe frame;
+	int ret;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to get avi infoframe: %d\n",
+			      ret);
+		return ret;
+	}
+
+	/* We always use YUV444 for HDMI output. */
+	frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+
+	return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AVI);
+}
+
+static void zx_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode,
+				     struct drm_display_mode *adj_mode)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
+
+	if (hdmi->sink_is_hdmi) {
+		zx_hdmi_config_video_avi(hdmi, mode);
+		zx_hdmi_config_video_vsi(hdmi, mode);
+	}
+}
+
+static void zx_hdmi_phy_start(struct zx_hdmi *hdmi)
+{
+	/* Copy from ZTE BSP code */
+	hdmi_writeb(hdmi, 0x222, 0x0);
+	hdmi_writeb(hdmi, 0x224, 0x4);
+	hdmi_writeb(hdmi, 0x909, 0x0);
+	hdmi_writeb(hdmi, 0x7b0, 0x90);
+	hdmi_writeb(hdmi, 0x7b1, 0x00);
+	hdmi_writeb(hdmi, 0x7b2, 0xa7);
+	hdmi_writeb(hdmi, 0x7b8, 0xaa);
+	hdmi_writeb(hdmi, 0x7b2, 0xa7);
+	hdmi_writeb(hdmi, 0x7b3, 0x0f);
+	hdmi_writeb(hdmi, 0x7b4, 0x0f);
+	hdmi_writeb(hdmi, 0x7b5, 0x55);
+	hdmi_writeb(hdmi, 0x7b7, 0x03);
+	hdmi_writeb(hdmi, 0x7b9, 0x12);
+	hdmi_writeb(hdmi, 0x7ba, 0x32);
+	hdmi_writeb(hdmi, 0x7bc, 0x68);
+	hdmi_writeb(hdmi, 0x7be, 0x40);
+	hdmi_writeb(hdmi, 0x7bf, 0x84);
+	hdmi_writeb(hdmi, 0x7c1, 0x0f);
+	hdmi_writeb(hdmi, 0x7c8, 0x02);
+	hdmi_writeb(hdmi, 0x7c9, 0x03);
+	hdmi_writeb(hdmi, 0x7ca, 0x40);
+	hdmi_writeb(hdmi, 0x7dc, 0x31);
+	hdmi_writeb(hdmi, 0x7e2, 0x04);
+	hdmi_writeb(hdmi, 0x7e0, 0x06);
+	hdmi_writeb(hdmi, 0x7cb, 0x68);
+	hdmi_writeb(hdmi, 0x7f9, 0x02);
+	hdmi_writeb(hdmi, 0x7b6, 0x02);
+	hdmi_writeb(hdmi, 0x7f3, 0x0);
+}
+
+static void zx_hdmi_hw_enable(struct zx_hdmi *hdmi)
+{
+	/* Enable pclk */
+	hdmi_writeb_mask(hdmi, CLKPWD, CLKPWD_PDIDCK, CLKPWD_PDIDCK);
+
+	/* Enable HDMI for TX */
+	hdmi_writeb_mask(hdmi, FUNC_SEL, FUNC_HDMI_EN, FUNC_HDMI_EN);
+
+	/* Enable deep color packet */
+	hdmi_writeb_mask(hdmi, P2T_CTRL, P2T_DC_PKT_EN, P2T_DC_PKT_EN);
+
+	/* Enable HDMI/MHL mode for output */
+	hdmi_writeb_mask(hdmi, TEST_TXCTRL, TEST_TXCTRL_HDMI_MODE,
+			 TEST_TXCTRL_HDMI_MODE);
+
+	/* Configure reg_qc_sel */
+	hdmi_writeb(hdmi, HDMICTL4, 0x3);
+
+	/* Enable interrupt */
+	hdmi_writeb_mask(hdmi, INTR1_MASK, INTR1_MONITOR_DETECT,
+			 INTR1_MONITOR_DETECT);
+
+	/* Start up phy */
+	zx_hdmi_phy_start(hdmi);
+}
+
+static void zx_hdmi_hw_disable(struct zx_hdmi *hdmi)
+{
+	/* Disable interrupt */
+	hdmi_writeb_mask(hdmi, INTR1_MASK, INTR1_MONITOR_DETECT, 0);
+
+	/* Disable deep color packet */
+	hdmi_writeb_mask(hdmi, P2T_CTRL, P2T_DC_PKT_EN, P2T_DC_PKT_EN);
+
+	/* Disable HDMI for TX */
+	hdmi_writeb_mask(hdmi, FUNC_SEL, FUNC_HDMI_EN, 0);
+
+	/* Disable pclk */
+	hdmi_writeb_mask(hdmi, CLKPWD, CLKPWD_PDIDCK, 0);
+}
+
+static void zx_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
+
+	clk_prepare_enable(hdmi->cec_clk);
+	clk_prepare_enable(hdmi->osc_clk);
+	clk_prepare_enable(hdmi->xclk);
+
+	zx_hdmi_hw_enable(hdmi);
+
+	vou_inf_enable(hdmi->inf, encoder->crtc);
+}
+
+static void zx_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
+
+	vou_inf_disable(hdmi->inf, encoder->crtc);
+
+	zx_hdmi_hw_disable(hdmi);
+
+	clk_disable_unprepare(hdmi->xclk);
+	clk_disable_unprepare(hdmi->osc_clk);
+	clk_disable_unprepare(hdmi->cec_clk);
+}
+
+static const struct drm_encoder_helper_funcs zx_hdmi_encoder_helper_funcs = {
+	.enable	= zx_hdmi_encoder_enable,
+	.disable = zx_hdmi_encoder_disable,
+	.mode_set = zx_hdmi_encoder_mode_set,
+};
+
+static const struct drm_encoder_funcs zx_hdmi_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static int zx_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
+	struct edid *edid;
+	int ret;
+
+	edid = drm_get_edid(connector, &hdmi->ddc->adap);
+	if (!edid)
+		return 0;
+
+	hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
+	hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
+	drm_mode_connector_update_edid_property(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
+}
+
+static enum drm_mode_status
+zx_hdmi_connector_mode_valid(struct drm_connector *connector,
+			     struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static struct drm_connector_helper_funcs zx_hdmi_connector_helper_funcs = {
+	.get_modes = zx_hdmi_connector_get_modes,
+	.mode_valid = zx_hdmi_connector_mode_valid,
+};
+
+static enum drm_connector_status
+zx_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct zx_hdmi *hdmi = to_zx_hdmi(connector);
+
+	return (hdmi_readb(hdmi, TPI_HPD_RSEN) & TPI_HPD_CONNECTION) ?
+		connector_status_connected : connector_status_disconnected;
+}
+
+static const struct drm_connector_funcs zx_hdmi_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = zx_hdmi_connector_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
+{
+	struct drm_encoder *encoder = &hdmi->encoder;
+
+	encoder->possible_crtcs = VOU_CRTC_MASK;
+
+	drm_encoder_init(drm, encoder, &zx_hdmi_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS, NULL);
+	drm_encoder_helper_add(encoder, &zx_hdmi_encoder_helper_funcs);
+
+	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_init(drm, &hdmi->connector, &zx_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_helper_add(&hdmi->connector,
+				 &zx_hdmi_connector_helper_funcs);
+
+	drm_mode_connector_attach_encoder(&hdmi->connector, encoder);
+
+	return 0;
+}
+
+static irqreturn_t zx_hdmi_irq_thread(int irq, void *dev_id)
+{
+	struct zx_hdmi *hdmi = dev_id;
+
+	drm_helper_hpd_irq_event(hdmi->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t zx_hdmi_irq_handler(int irq, void *dev_id)
+{
+	struct zx_hdmi *hdmi = dev_id;
+	u8 lstat;
+
+	lstat = hdmi_readb(hdmi, L1_INTR_STAT);
+
+	/* Monitor detect/HPD interrupt */
+	if (lstat & L1_INTR_STAT_INTR1) {
+		u8 stat;
+
+		stat = hdmi_readb(hdmi, INTR1_STAT);
+		hdmi_writeb(hdmi, INTR1_STAT, stat);
+
+		if (stat & INTR1_MONITOR_DETECT)
+			return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static int zx_hdmi_i2c_read(struct zx_hdmi *hdmi, struct i2c_msg *msg)
+{
+	int len = msg->len;
+	u8 *buf = msg->buf;
+	int retry = 0;
+	int ret = 0;
+
+	/* Bits [9:8] of bytes */
+	hdmi_writeb(hdmi, ZX_DDC_DIN_CNT2, (len >> 8) & 0xff);
+	/* Bits [7:0] of bytes */
+	hdmi_writeb(hdmi, ZX_DDC_DIN_CNT1, len & 0xff);
+
+	/* Clear FIFO */
+	hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK, DDC_CMD_CLEAR_FIFO);
+
+	/* Kick off the read */
+	hdmi_writeb_mask(hdmi, ZX_DDC_CMD, DDC_CMD_MASK,
+			 DDC_CMD_SEQUENTIAL_READ);
+
+	while (len > 0) {
+		int cnt, i;
+
+		/* FIFO needs some time to get ready */
+		usleep_range(500, 1000);
+
+		cnt = hdmi_readb(hdmi, ZX_DDC_DOUT_CNT) & DDC_DOUT_CNT_MASK;
+		if (cnt == 0) {
+			if (++retry > 5) {
+				DRM_DEV_ERROR(hdmi->dev,
+					      "DDC FIFO read timed out!");
+				return -ETIMEDOUT;
+			}
+			continue;
+		}
+
+		for (i = 0; i < cnt; i++)
+			*buf++ = hdmi_readb(hdmi, ZX_DDC_DATA);
+		len -= cnt;
+	}
+
+	return ret;
+}
+
+static int zx_hdmi_i2c_write(struct zx_hdmi *hdmi, struct i2c_msg *msg)
+{
+	/*
+	 * The DDC I2C adapter is only for reading EDID data, so we assume
+	 * that the write to this adapter must be the EDID data offset.
+	 */
+	if ((msg->len != 1) ||
+	    ((msg->addr != DDC_ADDR) && (msg->addr != DDC_SEGMENT_ADDR)))
+		return -EINVAL;
+
+	if (msg->addr == DDC_SEGMENT_ADDR)
+		hdmi_writeb(hdmi, ZX_DDC_SEGM, msg->addr << 1);
+	else if (msg->addr == DDC_ADDR)
+		hdmi_writeb(hdmi, ZX_DDC_ADDR, msg->addr << 1);
+
+	hdmi_writeb(hdmi, ZX_DDC_OFFSET, msg->buf[0]);
+
+	return 0;
+}
+
+static int zx_hdmi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			    int num)
+{
+	struct zx_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct zx_hdmi_i2c *ddc = hdmi->ddc;
+	int i, ret = 0;
+
+	mutex_lock(&ddc->lock);
+
+	/* Enable DDC master access */
+	hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, HW_DDC_MASTER);
+
+	for (i = 0; i < num; i++) {
+		DRM_DEV_DEBUG(hdmi->dev,
+			      "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			      i + 1, num, msgs[i].len, msgs[i].flags);
+
+		if (msgs[i].flags & I2C_M_RD)
+			ret = zx_hdmi_i2c_read(hdmi, &msgs[i]);
+		else
+			ret = zx_hdmi_i2c_write(hdmi, &msgs[i]);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Disable DDC master access */
+	hdmi_writeb_mask(hdmi, TPI_DDC_MASTER_EN, HW_DDC_MASTER, 0);
+
+	mutex_unlock(&ddc->lock);
+
+	return ret;
+}
+
+static u32 zx_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm zx_hdmi_algorithm = {
+	.master_xfer	= zx_hdmi_i2c_xfer,
+	.functionality	= zx_hdmi_i2c_func,
+};
+
+static int zx_hdmi_ddc_register(struct zx_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct zx_hdmi_i2c *ddc;
+	int ret;
+
+	ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
+	if (!ddc)
+		return -ENOMEM;
+
+	hdmi->ddc = ddc;
+	mutex_init(&ddc->lock);
+
+	adap = &ddc->adap;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_DDC;
+	adap->dev.parent = hdmi->dev;
+	adap->algo = &zx_hdmi_algorithm;
+	snprintf(adap->name, sizeof(adap->name), "zx hdmi i2c");
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "failed to add I2C adapter: %d\n",
+			      ret);
+		return ret;
+	}
+
+	i2c_set_adapdata(adap, hdmi);
+
+	return 0;
+}
+
+static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct resource *res;
+	struct zx_hdmi *hdmi;
+	int irq;
+	int ret;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	hdmi->dev = dev;
+	hdmi->drm = drm;
+	hdmi->inf = &vou_inf_hdmi;
+
+	dev_set_drvdata(dev, hdmi);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hdmi->mmio)) {
+		ret = PTR_ERR(hdmi->mmio);
+		DRM_DEV_ERROR(dev, "failed to remap hdmi region: %d\n", ret);
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	hdmi->cec_clk = devm_clk_get(hdmi->dev, "osc_cec");
+	if (IS_ERR(hdmi->cec_clk)) {
+		ret = PTR_ERR(hdmi->cec_clk);
+		DRM_DEV_ERROR(dev, "failed to get cec_clk: %d\n", ret);
+		return ret;
+	}
+
+	hdmi->osc_clk = devm_clk_get(hdmi->dev, "osc_clk");
+	if (IS_ERR(hdmi->osc_clk)) {
+		ret = PTR_ERR(hdmi->osc_clk);
+		DRM_DEV_ERROR(dev, "failed to get osc_clk: %d\n", ret);
+		return ret;
+	}
+
+	hdmi->xclk = devm_clk_get(hdmi->dev, "xclk");
+	if (IS_ERR(hdmi->xclk)) {
+		ret = PTR_ERR(hdmi->xclk);
+		DRM_DEV_ERROR(dev, "failed to get xclk: %d\n", ret);
+		return ret;
+	}
+
+	ret = zx_hdmi_ddc_register(hdmi);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to register ddc: %d\n", ret);
+		return ret;
+	}
+
+	ret = zx_hdmi_register(drm, hdmi);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to register hdmi: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, zx_hdmi_irq_handler,
+					zx_hdmi_irq_thread, IRQF_SHARED,
+					dev_name(dev), hdmi);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to request threaded irq: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void zx_hdmi_unbind(struct device *dev, struct device *master,
+			   void *data)
+{
+	struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+
+	hdmi->connector.funcs->destroy(&hdmi->connector);
+	hdmi->encoder.funcs->destroy(&hdmi->encoder);
+}
+
+static const struct component_ops zx_hdmi_component_ops = {
+	.bind = zx_hdmi_bind,
+	.unbind = zx_hdmi_unbind,
+};
+
+static int zx_hdmi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &zx_hdmi_component_ops);
+}
+
+static int zx_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &zx_hdmi_component_ops);
+	return 0;
+}
+
+static const struct of_device_id zx_hdmi_of_match[] = {
+	{ .compatible = "zte,zx296718-hdmi", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, zx_hdmi_of_match);
+
+struct platform_driver zx_hdmi_driver = {
+	.probe = zx_hdmi_probe,
+	.remove = zx_hdmi_remove,
+	.driver	= {
+		.name = "zx-hdmi",
+		.of_match_table	= zx_hdmi_of_match,
+	},
+};

drivers/gpu/drm/zte/zx_hdmi_regs.h

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_HDMI_REGS_H__
+#define __ZX_HDMI_REGS_H__
+
+#define FUNC_SEL			0x000b
+#define FUNC_HDMI_EN			BIT(0)
+#define CLKPWD				0x000d
+#define CLKPWD_PDIDCK			BIT(2)
+#define P2T_CTRL			0x0066
+#define P2T_DC_PKT_EN			BIT(7)
+#define L1_INTR_STAT			0x007e
+#define L1_INTR_STAT_INTR1		BIT(0)
+#define INTR1_STAT			0x008f
+#define INTR1_MASK			0x0095
+#define INTR1_MONITOR_DETECT		(BIT(5) | BIT(6))
+#define ZX_DDC_ADDR			0x00ed
+#define ZX_DDC_SEGM			0x00ee
+#define ZX_DDC_OFFSET			0x00ef
+#define ZX_DDC_DIN_CNT1			0x00f0
+#define ZX_DDC_DIN_CNT2			0x00f1
+#define ZX_DDC_CMD			0x00f3
+#define DDC_CMD_MASK			0xf
+#define DDC_CMD_CLEAR_FIFO		0x9
+#define DDC_CMD_SEQUENTIAL_READ		0x2
+#define ZX_DDC_DATA			0x00f4
+#define ZX_DDC_DOUT_CNT			0x00f5
+#define DDC_DOUT_CNT_MASK		0x1f
+#define TEST_TXCTRL			0x00f7
+#define TEST_TXCTRL_HDMI_MODE		BIT(1)
+#define HDMICTL4			0x0235
+#define TPI_HPD_RSEN			0x063b
+#define TPI_HPD_CONNECTION		(BIT(1) | BIT(2))
+#define TPI_INFO_FSEL			0x06bf
+#define FSEL_AVI			0
+#define FSEL_GBD			1
+#define FSEL_AUDIO			2
+#define FSEL_SPD			3
+#define FSEL_MPEG			4
+#define FSEL_VSIF			5
+#define TPI_INFO_B0			0x06c0
+#define TPI_INFO_EN			0x06df
+#define TPI_INFO_TRANS_EN		BIT(7)
+#define TPI_INFO_TRANS_RPT		BIT(6)
+#define TPI_DDC_MASTER_EN		0x06f8
+#define HW_DDC_MASTER			BIT(7)
+
+#endif /* __ZX_HDMI_REGS_H__ */

drivers/gpu/drm/zte/zx_plane.c

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drmP.h>
+
+#include "zx_drm_drv.h"
+#include "zx_plane.h"
+#include "zx_plane_regs.h"
+#include "zx_vou.h"
+
+struct zx_plane {
+	struct drm_plane plane;
+	void __iomem *layer;
+	void __iomem *csc;
+	void __iomem *hbsc;
+	void __iomem *rsz;
+};
+
+#define to_zx_plane(plane)	container_of(plane, struct zx_plane, plane)
+
+static const uint32_t gl_formats[] = {
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_ARGB4444,
+};
+
+static int zx_gl_plane_atomic_check(struct drm_plane *plane,
+				    struct drm_plane_state *plane_state)
+{
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_crtc *crtc = plane_state->crtc;
+	struct drm_crtc_state *crtc_state;
+	struct drm_rect clip;
+
+	if (!crtc || !fb)
+		return 0;
+
+	crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+							crtc);
+	if (WARN_ON(!crtc_state))
+		return -EINVAL;
+
+	/* nothing to check when disabling or disabled */
+	if (!crtc_state->enable)
+		return 0;
+
+	/* plane must be enabled */
+	if (!plane_state->crtc)
+		return -EINVAL;
+
+	clip.x1 = 0;
+	clip.y1 = 0;
+	clip.x2 = crtc_state->adjusted_mode.hdisplay;
+	clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+	return drm_plane_helper_check_state(plane_state, &clip,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    false, true);
+}
+
+static int zx_gl_get_fmt(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB8888:
+		return GL_FMT_ARGB8888;
+	case DRM_FORMAT_RGB888:
+		return GL_FMT_RGB888;
+	case DRM_FORMAT_RGB565:
+		return GL_FMT_RGB565;
+	case DRM_FORMAT_ARGB1555:
+		return GL_FMT_ARGB1555;
+	case DRM_FORMAT_ARGB4444:
+		return GL_FMT_ARGB4444;
+	default:
+		WARN_ONCE(1, "invalid pixel format %d\n", format);
+		return -EINVAL;
+	}
+}
+
+static inline void zx_gl_set_update(struct zx_plane *zplane)
+{
+	void __iomem *layer = zplane->layer;
+
+	zx_writel_mask(layer + GL_CTRL0, GL_UPDATE, GL_UPDATE);
+}
+
+static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
+{
+	zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
+}
+
+void zx_plane_set_update(struct drm_plane *plane)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+
+	zx_gl_rsz_set_update(zplane);
+	zx_gl_set_update(zplane);
+}
+
+static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
+			    u32 dst_w, u32 dst_h)
+{
+	void __iomem *rsz = zplane->rsz;
+
+	zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
+	zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
+
+	zx_gl_rsz_set_update(zplane);
+}
+
+static void zx_gl_plane_atomic_update(struct drm_plane *plane,
+				      struct drm_plane_state *old_state)
+{
+	struct zx_plane *zplane = to_zx_plane(plane);
+	struct drm_framebuffer *fb = plane->state->fb;
+	struct drm_gem_cma_object *cma_obj;
+	void __iomem *layer = zplane->layer;
+	void __iomem *csc = zplane->csc;
+	void __iomem *hbsc = zplane->hbsc;
+	u32 src_x, src_y, src_w, src_h;
+	u32 dst_x, dst_y, dst_w, dst_h;
+	unsigned int bpp;
+	uint32_t format;
+	dma_addr_t paddr;
+	u32 stride;
+	int fmt;
+
+	if (!fb)
+		return;
+
+	format = fb->pixel_format;
+	stride = fb->pitches[0];
+
+	src_x = plane->state->src_x >> 16;
+	src_y = plane->state->src_y >> 16;
+	src_w = plane->state->src_w >> 16;
+	src_h = plane->state->src_h >> 16;
+
+	dst_x = plane->state->crtc_x;
+	dst_y = plane->state->crtc_y;
+	dst_w = plane->state->crtc_w;
+	dst_h = plane->state->crtc_h;
+
+	bpp = drm_format_plane_cpp(format, 0);
+
+	cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+	paddr = cma_obj->paddr + fb->offsets[0];
+	paddr += src_y * stride + src_x * bpp / 8;
+	zx_writel(layer + GL_ADDR, paddr);
+
+	/* Set up source height/width register */
+	zx_writel(layer + GL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
+
+	/* Set up start position register */
+	zx_writel(layer + GL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
+
+	/* Set up end position register */
+	zx_writel(layer + GL_POS_END,
+		  GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
+
+	/* Set up stride register */
+	zx_writel(layer + GL_STRIDE, stride & 0xffff);
+
+	/* Set up graphic layer data format */
+	fmt = zx_gl_get_fmt(format);
+	if (fmt >= 0)
+		zx_writel_mask(layer + GL_CTRL1, GL_DATA_FMT_MASK,
+			       fmt << GL_DATA_FMT_SHIFT);
+
+	/* Initialize global alpha with a sane value */
+	zx_writel_mask(layer + GL_CTRL2, GL_GLOBAL_ALPHA_MASK,
+		       0xff << GL_GLOBAL_ALPHA_SHIFT);
+
+	/* Setup CSC for the GL */
+	if (dst_h > 720)
+		zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
+			       CSC_BT709_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
+	else
+		zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK,
+			       CSC_BT601_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT);
+	zx_writel_mask(csc + CSC_CTRL0, CSC_WORK_ENABLE, CSC_WORK_ENABLE);
+
+	/* Always use scaler since it exists (set for not bypass) */
+	zx_writel_mask(layer + GL_CTRL3, GL_SCALER_BYPASS_MODE,
+		       GL_SCALER_BYPASS_MODE);
+
+	zx_gl_rsz_setup(zplane, src_w, src_h, dst_w, dst_h);
+
+	/* Enable HBSC block */
+	zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+
+	zx_gl_set_update(zplane);
+}
+
+static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
+	.atomic_check = zx_gl_plane_atomic_check,
+	.atomic_update = zx_gl_plane_atomic_update,
+};
+
+static void zx_plane_destroy(struct drm_plane *plane)
+{
+	drm_plane_helper_disable(plane);
+	drm_plane_cleanup(plane);
+}
+
+static const struct drm_plane_funcs zx_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.destroy = zx_plane_destroy,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static void zx_plane_hbsc_init(struct zx_plane *zplane)
+{
+	void __iomem *hbsc = zplane->hbsc;
+
+	/*
+	 *  Initialize HBSC block with a sane configuration per recommedation
+	 *  from ZTE BSP code.
+	 */
+	zx_writel(hbsc + HBSC_SATURATION, 0x200);
+	zx_writel(hbsc + HBSC_HUE, 0x0);
+	zx_writel(hbsc + HBSC_BRIGHT, 0x0);
+	zx_writel(hbsc + HBSC_CONTRAST, 0x200);
+
+	zx_writel(hbsc + HBSC_THRESHOLD_COL1, (0x3ac << 16) | 0x40);
+	zx_writel(hbsc + HBSC_THRESHOLD_COL2, (0x3c0 << 16) | 0x40);
+	zx_writel(hbsc + HBSC_THRESHOLD_COL3, (0x3c0 << 16) | 0x40);
+}
+
+struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
+				struct zx_layer_data *data,
+				enum drm_plane_type type)
+{
+	const struct drm_plane_helper_funcs *helper;
+	struct zx_plane *zplane;
+	struct drm_plane *plane;
+	const uint32_t *formats;
+	unsigned int format_count;
+	int ret;
+
+	zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
+	if (!zplane)
+		return ERR_PTR(-ENOMEM);
+
+	plane = &zplane->plane;
+
+	zplane->layer = data->layer;
+	zplane->hbsc = data->hbsc;
+	zplane->csc = data->csc;
+	zplane->rsz = data->rsz;
+
+	zx_plane_hbsc_init(zplane);
+
+	switch (type) {
+	case DRM_PLANE_TYPE_PRIMARY:
+		helper = &zx_gl_plane_helper_funcs;
+		formats = gl_formats;
+		format_count = ARRAY_SIZE(gl_formats);
+		break;
+	case DRM_PLANE_TYPE_OVERLAY:
+		/* TODO: add video layer (vl) support */
+		break;
+	default:
+		return ERR_PTR(-ENODEV);
+	}
+
+	ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
+				       &zx_plane_funcs, formats, format_count,
+				       type, NULL);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to init universal plane: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	drm_plane_helper_add(plane, helper);
+
+	return plane;
+}

drivers/gpu/drm/zte/zx_plane.h

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_PLANE_H__
+#define __ZX_PLANE_H__
+
+struct zx_layer_data {
+	void __iomem *layer;
+	void __iomem *csc;
+	void __iomem *hbsc;
+	void __iomem *rsz;
+};
+
+struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
+				struct zx_layer_data *data,
+				enum drm_plane_type type);
+void zx_plane_set_update(struct drm_plane *plane);
+
+#endif /* __ZX_PLANE_H__ */

drivers/gpu/drm/zte/zx_plane_regs.h

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_PLANE_REGS_H__
+#define __ZX_PLANE_REGS_H__
+
+/* GL registers */
+#define GL_CTRL0			0x00
+#define GL_UPDATE			BIT(5)
+#define GL_CTRL1			0x04
+#define GL_DATA_FMT_SHIFT		0
+#define GL_DATA_FMT_MASK		(0xf << GL_DATA_FMT_SHIFT)
+#define GL_FMT_ARGB8888			0
+#define GL_FMT_RGB888			1
+#define GL_FMT_RGB565			2
+#define GL_FMT_ARGB1555			3
+#define GL_FMT_ARGB4444			4
+#define GL_CTRL2			0x08
+#define GL_GLOBAL_ALPHA_SHIFT		8
+#define GL_GLOBAL_ALPHA_MASK		(0xff << GL_GLOBAL_ALPHA_SHIFT)
+#define GL_CTRL3			0x0c
+#define GL_SCALER_BYPASS_MODE		BIT(0)
+#define GL_STRIDE			0x18
+#define GL_ADDR				0x1c
+#define GL_SRC_SIZE			0x38
+#define GL_SRC_W_SHIFT			16
+#define GL_SRC_W_MASK			(0x3fff << GL_SRC_W_SHIFT)
+#define GL_SRC_H_SHIFT			0
+#define GL_SRC_H_MASK			(0x3fff << GL_SRC_H_SHIFT)
+#define GL_POS_START			0x9c
+#define GL_POS_END			0xa0
+#define GL_POS_X_SHIFT			16
+#define GL_POS_X_MASK			(0x1fff << GL_POS_X_SHIFT)
+#define GL_POS_Y_SHIFT			0
+#define GL_POS_Y_MASK			(0x1fff << GL_POS_Y_SHIFT)
+
+#define GL_SRC_W(x)	(((x) << GL_SRC_W_SHIFT) & GL_SRC_W_MASK)
+#define GL_SRC_H(x)	(((x) << GL_SRC_H_SHIFT) & GL_SRC_H_MASK)
+#define GL_POS_X(x)	(((x) << GL_POS_X_SHIFT) & GL_POS_X_MASK)
+#define GL_POS_Y(x)	(((x) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK)
+
+/* CSC registers */
+#define CSC_CTRL0			0x30
+#define CSC_COV_MODE_SHIFT		16
+#define CSC_COV_MODE_MASK		(0xffff << CSC_COV_MODE_SHIFT)
+#define CSC_BT601_IMAGE_RGB2YCBCR	0
+#define CSC_BT601_IMAGE_YCBCR2RGB	1
+#define CSC_BT601_VIDEO_RGB2YCBCR	2
+#define CSC_BT601_VIDEO_YCBCR2RGB	3
+#define CSC_BT709_IMAGE_RGB2YCBCR	4
+#define CSC_BT709_IMAGE_YCBCR2RGB	5
+#define CSC_BT709_VIDEO_RGB2YCBCR	6
+#define CSC_BT709_VIDEO_YCBCR2RGB	7
+#define CSC_BT2020_IMAGE_RGB2YCBCR	8
+#define CSC_BT2020_IMAGE_YCBCR2RGB	9
+#define CSC_BT2020_VIDEO_RGB2YCBCR	10
+#define CSC_BT2020_VIDEO_YCBCR2RGB	11
+#define CSC_WORK_ENABLE			BIT(0)
+
+/* RSZ registers */
+#define RSZ_SRC_CFG			0x00
+#define RSZ_DEST_CFG			0x04
+#define RSZ_ENABLE_CFG			0x14
+
+#define RSZ_VER_SHIFT			16
+#define RSZ_VER_MASK			(0xffff << RSZ_VER_SHIFT)
+#define RSZ_HOR_SHIFT			0
+#define RSZ_HOR_MASK			(0xffff << RSZ_HOR_SHIFT)
+
+#define RSZ_VER(x)	(((x) << RSZ_VER_SHIFT) & RSZ_VER_MASK)
+#define RSZ_HOR(x)	(((x) << RSZ_HOR_SHIFT) & RSZ_HOR_MASK)
+
+/* HBSC registers */
+#define HBSC_SATURATION			0x00
+#define HBSC_HUE			0x04
+#define HBSC_BRIGHT			0x08
+#define HBSC_CONTRAST			0x0c
+#define HBSC_THRESHOLD_COL1		0x10
+#define HBSC_THRESHOLD_COL2		0x14
+#define HBSC_THRESHOLD_COL3		0x18
+#define HBSC_CTRL0			0x28
+#define HBSC_CTRL_EN			BIT(2)
+
+#endif /* __ZX_PLANE_REGS_H__ */

drivers/gpu/drm/zte/zx_vou.c

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_address.h>
+#include <video/videomode.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drmP.h>
+
+#include "zx_drm_drv.h"
+#include "zx_plane.h"
+#include "zx_vou.h"
+#include "zx_vou_regs.h"
+
+#define GL_NUM	2
+#define VL_NUM	3
+
+enum vou_chn_type {
+	VOU_CHN_MAIN,
+	VOU_CHN_AUX,
+};
+
+struct zx_crtc_regs {
+	u32 fir_active;
+	u32 fir_htiming;
+	u32 fir_vtiming;
+	u32 timing_shift;
+	u32 timing_pi_shift;
+};
+
+static const struct zx_crtc_regs main_crtc_regs = {
+	.fir_active = FIR_MAIN_ACTIVE,
+	.fir_htiming = FIR_MAIN_H_TIMING,
+	.fir_vtiming = FIR_MAIN_V_TIMING,
+	.timing_shift = TIMING_MAIN_SHIFT,
+	.timing_pi_shift = TIMING_MAIN_PI_SHIFT,
+};
+
+static const struct zx_crtc_regs aux_crtc_regs = {
+	.fir_active = FIR_AUX_ACTIVE,
+	.fir_htiming = FIR_AUX_H_TIMING,
+	.fir_vtiming = FIR_AUX_V_TIMING,
+	.timing_shift = TIMING_AUX_SHIFT,
+	.timing_pi_shift = TIMING_AUX_PI_SHIFT,
+};
+
+struct zx_crtc_bits {
+	u32 polarity_mask;
+	u32 polarity_shift;
+	u32 int_frame_mask;
+	u32 tc_enable;
+	u32 gl_enable;
+};
+
+static const struct zx_crtc_bits main_crtc_bits = {
+	.polarity_mask = MAIN_POL_MASK,
+	.polarity_shift = MAIN_POL_SHIFT,
+	.int_frame_mask = TIMING_INT_MAIN_FRAME,
+	.tc_enable = MAIN_TC_EN,
+	.gl_enable = OSD_CTRL0_GL0_EN,
+};
+
+static const struct zx_crtc_bits aux_crtc_bits = {
+	.polarity_mask = AUX_POL_MASK,
+	.polarity_shift = AUX_POL_SHIFT,
+	.int_frame_mask = TIMING_INT_AUX_FRAME,
+	.tc_enable = AUX_TC_EN,
+	.gl_enable = OSD_CTRL0_GL1_EN,
+};
+
+struct zx_crtc {
+	struct drm_crtc crtc;
+	struct drm_plane *primary;
+	struct zx_vou_hw *vou;
+	void __iomem *chnreg;
+	const struct zx_crtc_regs *regs;
+	const struct zx_crtc_bits *bits;
+	enum vou_chn_type chn_type;
+	struct clk *pixclk;
+};
+
+#define to_zx_crtc(x) container_of(x, struct zx_crtc, crtc)
+
+struct zx_vou_hw {
+	struct device *dev;
+	void __iomem *osd;
+	void __iomem *timing;
+	void __iomem *vouctl;
+	void __iomem *otfppu;
+	void __iomem *dtrc;
+	struct clk *axi_clk;
+	struct clk *ppu_clk;
+	struct clk *main_clk;
+	struct clk *aux_clk;
+	struct zx_crtc *main_crtc;
+	struct zx_crtc *aux_crtc;
+};
+
+static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc)
+{
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+
+	return zcrtc->vou;
+}
+
+void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc)
+{
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+	struct zx_vou_hw *vou = zcrtc->vou;
+	bool is_main = zcrtc->chn_type == VOU_CHN_MAIN;
+	u32 data_sel_shift = inf->id << 1;
+
+	/* Select data format */
+	zx_writel_mask(vou->vouctl + VOU_INF_DATA_SEL, 0x3 << data_sel_shift,
+		       inf->data_sel << data_sel_shift);
+
+	/* Select channel */
+	zx_writel_mask(vou->vouctl + VOU_INF_CH_SEL, 0x1 << inf->id,
+		       zcrtc->chn_type << inf->id);
+
+	/* Select interface clocks */
+	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, inf->clocks_sel_bits,
+		       is_main ? 0 : inf->clocks_sel_bits);
+
+	/* Enable interface clocks */
+	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits,
+		       inf->clocks_en_bits);
+
+	/* Enable the device */
+	zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 1 << inf->id);
+}
+
+void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc)
+{
+	struct zx_vou_hw *vou = crtc_to_vou(crtc);
+
+	/* Disable the device */
+	zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << inf->id, 0);
+
+	/* Disable interface clocks */
+	zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, 0);
+}
+
+static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
+{
+	zx_writel(zcrtc->chnreg + CHN_UPDATE, 1);
+}
+
+static void zx_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+	struct zx_vou_hw *vou = zcrtc->vou;
+	const struct zx_crtc_regs *regs = zcrtc->regs;
+	const struct zx_crtc_bits *bits = zcrtc->bits;
+	struct videomode vm;
+	u32 pol = 0;
+	u32 val;
+	int ret;
+
+	drm_display_mode_to_videomode(mode, &vm);
+
+	/* Set up timing parameters */
+	val = V_ACTIVE(vm.vactive - 1);
+	val |= H_ACTIVE(vm.hactive - 1);
+	zx_writel(vou->timing + regs->fir_active, val);
+
+	val = SYNC_WIDE(vm.hsync_len - 1);
+	val |= BACK_PORCH(vm.hback_porch - 1);
+	val |= FRONT_PORCH(vm.hfront_porch - 1);
+	zx_writel(vou->timing + regs->fir_htiming, val);
+
+	val = SYNC_WIDE(vm.vsync_len - 1);
+	val |= BACK_PORCH(vm.vback_porch - 1);
+	val |= FRONT_PORCH(vm.vfront_porch - 1);
+	zx_writel(vou->timing + regs->fir_vtiming, val);
+
+	/* Set up polarities */
+	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
+		pol |= 1 << POL_VSYNC_SHIFT;
+	if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
+		pol |= 1 << POL_HSYNC_SHIFT;
+
+	zx_writel_mask(vou->timing + TIMING_CTRL, bits->polarity_mask,
+		       pol << bits->polarity_shift);
+
+	/* Setup SHIFT register by following what ZTE BSP does */
+	zx_writel(vou->timing + regs->timing_shift, H_SHIFT_VAL);
+	zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL);
+
+	/* Enable TIMING_CTRL */
+	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable,
+		       bits->tc_enable);
+
+	/* Configure channel screen size */
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_W_MASK,
+		       vm.hactive << CHN_SCREEN_W_SHIFT);
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK,
+		       vm.vactive << CHN_SCREEN_H_SHIFT);
+
+	/* Update channel */
+	vou_chn_set_update(zcrtc);
+
+	/* Enable channel */
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, CHN_ENABLE);
+
+	/* Enable Graphic Layer */
+	zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable,
+		       bits->gl_enable);
+
+	drm_crtc_vblank_on(crtc);
+
+	ret = clk_set_rate(zcrtc->pixclk, mode->clock * 1000);
+	if (ret) {
+		DRM_DEV_ERROR(vou->dev, "failed to set pixclk rate: %d\n", ret);
+		return;
+	}
+
+	ret = clk_prepare_enable(zcrtc->pixclk);
+	if (ret)
+		DRM_DEV_ERROR(vou->dev, "failed to enable pixclk: %d\n", ret);
+}
+
+static void zx_crtc_disable(struct drm_crtc *crtc)
+{
+	struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+	const struct zx_crtc_bits *bits = zcrtc->bits;
+	struct zx_vou_hw *vou = zcrtc->vou;
+
+	clk_disable_unprepare(zcrtc->pixclk);
+
+	drm_crtc_vblank_off(crtc);
+
+	/* Disable Graphic Layer */
+	zx_writel_mask(vou->osd + OSD_CTRL0, bits->gl_enable, 0);
+
+	/* Disable channel */
+	zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, 0);
+
+	/* Disable TIMING_CTRL */
+	zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable, 0);
+}
+
+static void zx_crtc_atomic_flush(struct drm_crtc *crtc,
+				  struct drm_crtc_state *old_state)
+{
+	struct drm_pending_vblank_event *event = crtc->state->event;
+
+	if (!event)
+		return;
+
+	crtc->state->event = NULL;
+
+	spin_lock_irq(&crtc->dev->event_lock);
+	if (drm_crtc_vblank_get(crtc) == 0)
+		drm_crtc_arm_vblank_event(crtc, event);
+	else
+		drm_crtc_send_vblank_event(crtc, event);
+	spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = {
+	.enable = zx_crtc_enable,
+	.disable = zx_crtc_disable,
+	.atomic_flush = zx_crtc_atomic_flush,
+};
+
+static const struct drm_crtc_funcs zx_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou,
+			enum vou_chn_type chn_type)
+{
+	struct device *dev = vou->dev;
+	struct zx_layer_data data;
+	struct zx_crtc *zcrtc;
+	int ret;
+
+	zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL);
+	if (!zcrtc)
+		return -ENOMEM;
+
+	zcrtc->vou = vou;
+	zcrtc->chn_type = chn_type;
+
+	if (chn_type == VOU_CHN_MAIN) {
+		data.layer = vou->osd + MAIN_GL_OFFSET;
+		data.csc = vou->osd + MAIN_CSC_OFFSET;
+		data.hbsc = vou->osd + MAIN_HBSC_OFFSET;
+		data.rsz = vou->otfppu + MAIN_RSZ_OFFSET;
+		zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
+		zcrtc->regs = &main_crtc_regs;
+		zcrtc->bits = &main_crtc_bits;
+	} else {
+		data.layer = vou->osd + AUX_GL_OFFSET;
+		data.csc = vou->osd + AUX_CSC_OFFSET;
+		data.hbsc = vou->osd + AUX_HBSC_OFFSET;
+		data.rsz = vou->otfppu + AUX_RSZ_OFFSET;
+		zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
+		zcrtc->regs = &aux_crtc_regs;
+		zcrtc->bits = &aux_crtc_bits;
+	}
+
+	zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ?
+					  "main_wclk" : "aux_wclk");
+	if (IS_ERR(zcrtc->pixclk)) {
+		ret = PTR_ERR(zcrtc->pixclk);
+		DRM_DEV_ERROR(dev, "failed to get pix clk: %d\n", ret);
+		return ret;
+	}
+
+	zcrtc->primary = zx_plane_init(drm, dev, &data, DRM_PLANE_TYPE_PRIMARY);
+	if (IS_ERR(zcrtc->primary)) {
+		ret = PTR_ERR(zcrtc->primary);
+		DRM_DEV_ERROR(dev, "failed to init primary plane: %d\n", ret);
+		return ret;
+	}
+
+	ret = drm_crtc_init_with_planes(drm, &zcrtc->crtc, zcrtc->primary, NULL,
+					&zx_crtc_funcs, NULL);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to init drm crtc: %d\n", ret);
+		return ret;
+	}
+
+	drm_crtc_helper_add(&zcrtc->crtc, &zx_crtc_helper_funcs);
+
+	if (chn_type == VOU_CHN_MAIN)
+		vou->main_crtc = zcrtc;
+	else
+		vou->aux_crtc = zcrtc;
+
+	return 0;
+}
+
+static inline struct drm_crtc *zx_find_crtc(struct drm_device *drm, int pipe)
+{
+	struct drm_crtc *crtc;
+
+	list_for_each_entry(crtc, &drm->mode_config.crtc_list, head)
+		if (crtc->index == pipe)
+			return crtc;
+
+	return NULL;
+}
+
+int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe)
+{
+	struct drm_crtc *crtc;
+	struct zx_crtc *zcrtc;
+	struct zx_vou_hw *vou;
+	u32 int_frame_mask;
+
+	crtc = zx_find_crtc(drm, pipe);
+	if (!crtc)
+		return 0;
+
+	vou = crtc_to_vou(crtc);
+	zcrtc = to_zx_crtc(crtc);
+	int_frame_mask = zcrtc->bits->int_frame_mask;
+
+	zx_writel_mask(vou->timing + TIMING_INT_CTRL, int_frame_mask,
+		       int_frame_mask);
+
+	return 0;
+}
+
+void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe)
+{
+	struct drm_crtc *crtc;
+	struct zx_crtc *zcrtc;
+	struct zx_vou_hw *vou;
+
+	crtc = zx_find_crtc(drm, pipe);
+	if (!crtc)
+		return;
+
+	vou = crtc_to_vou(crtc);
+	zcrtc = to_zx_crtc(crtc);
+
+	zx_writel_mask(vou->timing + TIMING_INT_CTRL,
+		       zcrtc->bits->int_frame_mask, 0);
+}
+
+static irqreturn_t vou_irq_handler(int irq, void *dev_id)
+{
+	struct zx_vou_hw *vou = dev_id;
+	u32 state;
+
+	/* Handle TIMING_CTRL frame interrupts */
+	state = zx_readl(vou->timing + TIMING_INT_STATE);
+	zx_writel(vou->timing + TIMING_INT_STATE, state);
+
+	if (state & TIMING_INT_MAIN_FRAME)
+		drm_crtc_handle_vblank(&vou->main_crtc->crtc);
+
+	if (state & TIMING_INT_AUX_FRAME)
+		drm_crtc_handle_vblank(&vou->aux_crtc->crtc);
+
+	/* Handle OSD interrupts */
+	state = zx_readl(vou->osd + OSD_INT_STA);
+	zx_writel(vou->osd + OSD_INT_CLRSTA, state);
+
+	if (state & OSD_INT_MAIN_UPT) {
+		vou_chn_set_update(vou->main_crtc);
+		zx_plane_set_update(vou->main_crtc->primary);
+	}
+
+	if (state & OSD_INT_AUX_UPT) {
+		vou_chn_set_update(vou->aux_crtc);
+		zx_plane_set_update(vou->aux_crtc->primary);
+	}
+
+	if (state & OSD_INT_ERROR)
+		DRM_DEV_ERROR(vou->dev, "OSD ERROR: 0x%08x!\n", state);
+
+	return IRQ_HANDLED;
+}
+
+static void vou_dtrc_init(struct zx_vou_hw *vou)
+{
+	/* Clear bit for bypass by ID */
+	zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL,
+		       TILE2RASTESCAN_BYPASS_MODE, 0);
+
+	/* Select ARIDR mode */
+	zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL, DETILE_ARIDR_MODE_MASK,
+		       DETILE_ARID_IN_ARIDR);
+
+	/* Bypass decompression for both frames */
+	zx_writel_mask(vou->dtrc + DTRC_F0_CTRL, DTRC_DECOMPRESS_BYPASS,
+		       DTRC_DECOMPRESS_BYPASS);
+	zx_writel_mask(vou->dtrc + DTRC_F1_CTRL, DTRC_DECOMPRESS_BYPASS,
+		       DTRC_DECOMPRESS_BYPASS);
+
+	/* Set up ARID register */
+	zx_writel(vou->dtrc + DTRC_ARID, DTRC_ARID3(0xf) | DTRC_ARID2(0xe) |
+		  DTRC_ARID1(0xf) | DTRC_ARID0(0xe));
+}
+
+static void vou_hw_init(struct zx_vou_hw *vou)
+{
+	/* Set GL0 to main channel and GL1 to aux channel */
+	zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL0_SEL, 0);
+	zx_writel_mask(vou->osd + OSD_CTRL0, OSD_CTRL0_GL1_SEL,
+		       OSD_CTRL0_GL1_SEL);
+
+	/* Release reset for all VOU modules */
+	zx_writel(vou->vouctl + VOU_SOFT_RST, ~0);
+
+	/* Select main clock for GL0 and aux clock for GL1 module */
+	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL0_SEL, 0);
+	zx_writel_mask(vou->vouctl + VOU_CLK_SEL, VOU_CLK_GL1_SEL,
+		       VOU_CLK_GL1_SEL);
+
+	/* Enable clock auto-gating for all VOU modules */
+	zx_writel(vou->vouctl + VOU_CLK_REQEN, ~0);
+
+	/* Enable all VOU module clocks */
+	zx_writel(vou->vouctl + VOU_CLK_EN, ~0);
+
+	/* Clear both OSD and TIMING_CTRL interrupt state */
+	zx_writel(vou->osd + OSD_INT_CLRSTA, ~0);
+	zx_writel(vou->timing + TIMING_INT_STATE, ~0);
+
+	/* Enable OSD and TIMING_CTRL interrrupts */
+	zx_writel(vou->osd + OSD_INT_MSK, OSD_INT_ENABLE);
+	zx_writel(vou->timing + TIMING_INT_CTRL, TIMING_INT_ENABLE);
+
+	/* Select GPC as input to gl/vl scaler as a sane default setting */
+	zx_writel(vou->otfppu + OTFPPU_RSZ_DATA_SOURCE, 0x2a);
+
+	/*
+	 * Needs to reset channel and layer logic per frame when frame starts
+	 * to get VOU work properly.
+	 */
+	zx_writel_mask(vou->osd + OSD_RST_CLR, RST_PER_FRAME, RST_PER_FRAME);
+
+	vou_dtrc_init(vou);
+}
+
+static int zx_crtc_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct zx_vou_hw *vou;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	vou = devm_kzalloc(dev, sizeof(*vou), GFP_KERNEL);
+	if (!vou)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "osd");
+	vou->osd = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->osd)) {
+		ret = PTR_ERR(vou->osd);
+		DRM_DEV_ERROR(dev, "failed to remap osd region: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "timing_ctrl");
+	vou->timing = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->timing)) {
+		ret = PTR_ERR(vou->timing);
+		DRM_DEV_ERROR(dev, "failed to remap timing_ctrl region: %d\n",
+			      ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dtrc");
+	vou->dtrc = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->dtrc)) {
+		ret = PTR_ERR(vou->dtrc);
+		DRM_DEV_ERROR(dev, "failed to remap dtrc region: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vou_ctrl");
+	vou->vouctl = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->vouctl)) {
+		ret = PTR_ERR(vou->vouctl);
+		DRM_DEV_ERROR(dev, "failed to remap vou_ctrl region: %d\n",
+			      ret);
+		return ret;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otfppu");
+	vou->otfppu = devm_ioremap_resource(dev, res);
+	if (IS_ERR(vou->otfppu)) {
+		ret = PTR_ERR(vou->otfppu);
+		DRM_DEV_ERROR(dev, "failed to remap otfppu region: %d\n", ret);
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	vou->axi_clk = devm_clk_get(dev, "aclk");
+	if (IS_ERR(vou->axi_clk)) {
+		ret = PTR_ERR(vou->axi_clk);
+		DRM_DEV_ERROR(dev, "failed to get axi_clk: %d\n", ret);
+		return ret;
+	}
+
+	vou->ppu_clk = devm_clk_get(dev, "ppu_wclk");
+	if (IS_ERR(vou->ppu_clk)) {
+		ret = PTR_ERR(vou->ppu_clk);
+		DRM_DEV_ERROR(dev, "failed to get ppu_clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(vou->axi_clk);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to enable axi_clk: %d\n", ret);
+		return ret;
+	}
+
+	clk_prepare_enable(vou->ppu_clk);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to enable ppu_clk: %d\n", ret);
+		goto disable_axi_clk;
+	}
+
+	vou->dev = dev;
+	dev_set_drvdata(dev, vou);
+
+	vou_hw_init(vou);
+
+	ret = devm_request_irq(dev, irq, vou_irq_handler, 0, "zx_vou", vou);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "failed to request vou irq: %d\n", ret);
+		goto disable_ppu_clk;
+	}
+
+	ret = zx_crtc_init(drm, vou, VOU_CHN_MAIN);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to init main channel crtc: %d\n",
+			      ret);
+		goto disable_ppu_clk;
+	}
+
+	ret = zx_crtc_init(drm, vou, VOU_CHN_AUX);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to init aux channel crtc: %d\n",
+			      ret);
+		goto disable_ppu_clk;
+	}
+
+	return 0;
+
+disable_ppu_clk:
+	clk_disable_unprepare(vou->ppu_clk);
+disable_axi_clk:
+	clk_disable_unprepare(vou->axi_clk);
+	return ret;
+}
+
+static void zx_crtc_unbind(struct device *dev, struct device *master,
+			   void *data)
+{
+	struct zx_vou_hw *vou = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(vou->axi_clk);
+	clk_disable_unprepare(vou->ppu_clk);
+}
+
+static const struct component_ops zx_crtc_component_ops = {
+	.bind = zx_crtc_bind,
+	.unbind = zx_crtc_unbind,
+};
+
+static int zx_crtc_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &zx_crtc_component_ops);
+}
+
+static int zx_crtc_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &zx_crtc_component_ops);
+	return 0;
+}
+
+static const struct of_device_id zx_crtc_of_match[] = {
+	{ .compatible = "zte,zx296718-dpc", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, zx_crtc_of_match);
+
+struct platform_driver zx_crtc_driver = {
+	.probe = zx_crtc_probe,
+	.remove = zx_crtc_remove,
+	.driver	= {
+		.name = "zx-crtc",
+		.of_match_table	= zx_crtc_of_match,
+	},
+};

drivers/gpu/drm/zte/zx_vou.h

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_VOU_H__
+#define __ZX_VOU_H__
+
+#define VOU_CRTC_MASK		0x3
+
+/* VOU output interfaces */
+enum vou_inf_id {
+	VOU_HDMI	= 0,
+	VOU_RGB_LCD	= 1,
+	VOU_TV_ENC	= 2,
+	VOU_MIPI_DSI	= 3,
+	VOU_LVDS	= 4,
+	VOU_VGA		= 5,
+};
+
+enum vou_inf_data_sel {
+	VOU_YUV444	= 0,
+	VOU_RGB_101010	= 1,
+	VOU_RGB_888	= 2,
+	VOU_RGB_666	= 3,
+};
+
+struct vou_inf {
+	enum vou_inf_id id;
+	enum vou_inf_data_sel data_sel;
+	u32 clocks_en_bits;
+	u32 clocks_sel_bits;
+};
+
+void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc);
+void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc);
+
+int zx_vou_enable_vblank(struct drm_device *drm, unsigned int pipe);
+void zx_vou_disable_vblank(struct drm_device *drm, unsigned int pipe);
+
+#endif /* __ZX_VOU_H__ */

drivers/gpu/drm/zte/zx_vou_regs.h

+/*
+ * Copyright 2016 Linaro Ltd.
+ * Copyright 2016 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ZX_VOU_REGS_H__
+#define __ZX_VOU_REGS_H__
+
+/* Sub-module offset */
+#define MAIN_GL_OFFSET			0x130
+#define MAIN_CSC_OFFSET			0x580
+#define MAIN_HBSC_OFFSET		0x820
+#define MAIN_RSZ_OFFSET			0x600 /* OTFPPU sub-module */
+
+#define AUX_GL_OFFSET			0x200
+#define AUX_CSC_OFFSET			0x5d0
+#define AUX_HBSC_OFFSET			0x860
+#define AUX_RSZ_OFFSET			0x800
+
+/* OSD (GPC_GLOBAL) registers */
+#define OSD_INT_STA			0x04
+#define OSD_INT_CLRSTA			0x08
+#define OSD_INT_MSK			0x0c
+#define OSD_INT_AUX_UPT			BIT(14)
+#define OSD_INT_MAIN_UPT		BIT(13)
+#define OSD_INT_GL1_LBW			BIT(10)
+#define OSD_INT_GL0_LBW			BIT(9)
+#define OSD_INT_VL2_LBW			BIT(8)
+#define OSD_INT_VL1_LBW			BIT(7)
+#define OSD_INT_VL0_LBW			BIT(6)
+#define OSD_INT_BUS_ERR			BIT(3)
+#define OSD_INT_CFG_ERR			BIT(2)
+#define OSD_INT_ERROR (\
+	OSD_INT_GL1_LBW | OSD_INT_GL0_LBW | \
+	OSD_INT_VL2_LBW | OSD_INT_VL1_LBW | OSD_INT_VL0_LBW | \
+	OSD_INT_BUS_ERR | OSD_INT_CFG_ERR \
+)
+#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
+#define OSD_CTRL0			0x10
+#define OSD_CTRL0_GL0_EN		BIT(7)
+#define OSD_CTRL0_GL0_SEL		BIT(6)
+#define OSD_CTRL0_GL1_EN		BIT(5)
+#define OSD_CTRL0_GL1_SEL		BIT(4)
+#define OSD_RST_CLR			0x1c
+#define RST_PER_FRAME			BIT(19)
+
+/* Main/Aux channel registers */
+#define OSD_MAIN_CHN			0x470
+#define OSD_AUX_CHN			0x4d0
+#define CHN_CTRL0			0x00
+#define CHN_ENABLE			BIT(0)
+#define CHN_CTRL1			0x04
+#define CHN_SCREEN_W_SHIFT		18
+#define CHN_SCREEN_W_MASK		(0x1fff << CHN_SCREEN_W_SHIFT)
+#define CHN_SCREEN_H_SHIFT		5
+#define CHN_SCREEN_H_MASK		(0x1fff << CHN_SCREEN_H_SHIFT)
+#define CHN_UPDATE			0x08
+
+/* TIMING_CTRL registers */
+#define TIMING_TC_ENABLE		0x04
+#define AUX_TC_EN			BIT(1)
+#define MAIN_TC_EN			BIT(0)
+#define FIR_MAIN_ACTIVE			0x08
+#define FIR_AUX_ACTIVE			0x0c
+#define V_ACTIVE_SHIFT			16
+#define V_ACTIVE_MASK			(0xffff << V_ACTIVE_SHIFT)
+#define H_ACTIVE_SHIFT			0
+#define H_ACTIVE_MASK			(0xffff << H_ACTIVE_SHIFT)
+#define FIR_MAIN_H_TIMING		0x10
+#define FIR_MAIN_V_TIMING		0x14
+#define FIR_AUX_H_TIMING		0x18
+#define FIR_AUX_V_TIMING		0x1c
+#define SYNC_WIDE_SHIFT			22
+#define SYNC_WIDE_MASK			(0x3ff << SYNC_WIDE_SHIFT)
+#define BACK_PORCH_SHIFT		11
+#define BACK_PORCH_MASK			(0x7ff << BACK_PORCH_SHIFT)
+#define FRONT_PORCH_SHIFT		0
+#define FRONT_PORCH_MASK		(0x7ff << FRONT_PORCH_SHIFT)
+#define TIMING_CTRL			0x20
+#define AUX_POL_SHIFT			3
+#define AUX_POL_MASK			(0x7 << AUX_POL_SHIFT)
+#define MAIN_POL_SHIFT			0
+#define MAIN_POL_MASK			(0x7 << MAIN_POL_SHIFT)
+#define POL_DE_SHIFT			2
+#define POL_VSYNC_SHIFT			1
+#define POL_HSYNC_SHIFT			0
+#define TIMING_INT_CTRL			0x24
+#define TIMING_INT_STATE		0x28
+#define TIMING_INT_AUX_FRAME		BIT(3)
+#define TIMING_INT_MAIN_FRAME		BIT(1)
+#define TIMING_INT_AUX_FRAME_SEL_VSW	(0x2 << 10)
+#define TIMING_INT_MAIN_FRAME_SEL_VSW	(0x2 << 6)
+#define TIMING_INT_ENABLE (\
+	TIMING_INT_MAIN_FRAME_SEL_VSW | TIMING_INT_AUX_FRAME_SEL_VSW | \
+	TIMING_INT_MAIN_FRAME | TIMING_INT_AUX_FRAME \
+)
+#define TIMING_MAIN_SHIFT		0x2c
+#define TIMING_AUX_SHIFT		0x30
+#define H_SHIFT_VAL			0x0048
+#define TIMING_MAIN_PI_SHIFT		0x68
+#define TIMING_AUX_PI_SHIFT		0x6c
+#define H_PI_SHIFT_VAL			0x000f
+
+#define V_ACTIVE(x)	(((x) << V_ACTIVE_SHIFT) & V_ACTIVE_MASK)
+#define H_ACTIVE(x)	(((x) << H_ACTIVE_SHIFT) & H_ACTIVE_MASK)
+
+#define SYNC_WIDE(x)	(((x) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK)
+#define BACK_PORCH(x)	(((x) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK)
+#define FRONT_PORCH(x)	(((x) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK)
+
+/* DTRC registers */
+#define DTRC_F0_CTRL			0x2c
+#define DTRC_F1_CTRL			0x5c
+#define DTRC_DECOMPRESS_BYPASS		BIT(17)
+#define DTRC_DETILE_CTRL		0x68
+#define TILE2RASTESCAN_BYPASS_MODE	BIT(30)
+#define DETILE_ARIDR_MODE_MASK		(0x3 << 0)
+#define DETILE_ARID_ALL			0
+#define DETILE_ARID_IN_ARIDR		1
+#define DETILE_ARID_BYP_BUT_ARIDR	2
+#define DETILE_ARID_IN_ARIDR2		3
+#define DTRC_ARID			0x6c
+#define DTRC_ARID3_SHIFT		24
+#define DTRC_ARID3_MASK			(0xff << DTRC_ARID3_SHIFT)
+#define DTRC_ARID2_SHIFT		16
+#define DTRC_ARID2_MASK			(0xff << DTRC_ARID2_SHIFT)
+#define DTRC_ARID1_SHIFT		8
+#define DTRC_ARID1_MASK			(0xff << DTRC_ARID1_SHIFT)
+#define DTRC_ARID0_SHIFT		0
+#define DTRC_ARID0_MASK			(0xff << DTRC_ARID0_SHIFT)
+#define DTRC_DEC2DDR_ARID		0x70
+
+#define DTRC_ARID3(x)	(((x) << DTRC_ARID3_SHIFT) & DTRC_ARID3_MASK)
+#define DTRC_ARID2(x)	(((x) << DTRC_ARID2_SHIFT) & DTRC_ARID2_MASK)
+#define DTRC_ARID1(x)	(((x) << DTRC_ARID1_SHIFT) & DTRC_ARID1_MASK)
+#define DTRC_ARID0(x)	(((x) << DTRC_ARID0_SHIFT) & DTRC_ARID0_MASK)
+
+/* VOU_CTRL registers */
+#define VOU_INF_EN			0x00
+#define VOU_INF_CH_SEL			0x04
+#define VOU_INF_DATA_SEL		0x08
+#define VOU_SOFT_RST			0x14
+#define VOU_CLK_SEL			0x18
+#define VOU_CLK_GL1_SEL			BIT(5)
+#define VOU_CLK_GL0_SEL			BIT(4)
+#define VOU_CLK_REQEN			0x20
+#define VOU_CLK_EN			0x24
+
+/* OTFPPU_CTRL registers */
+#define OTFPPU_RSZ_DATA_SOURCE		0x04
+
+#endif /* __ZX_VOU_REGS_H__ */