Commit d8ece8b8 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'riscv-dt-for-v6.5-pt2' of...

Merge tag 'riscv-dt-for-v6.5-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt

RISC-V Devicetrees for v6.5 Part 2

T-Head:
Add a basic dtsi, Kconfig bits & trivial binding additions for the T-Head
1520 SoC (codename "light"). This SoC can be found on the Lichee Pi 4a,
for which a minimal dts is added.

Misc:
Re-sort the dts Makefile to be in alphanumerical order by directory.
Signed-off-by: default avatarConor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-for-v6.5-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  dt-bindings: riscv: Add T-HEAD TH1520 board compatibles
  dt-bindings: timer: Add T-HEAD TH1520 clint
  dt-bindings: interrupt-controller: Add T-HEAD's TH1520 PLIC

Link: https://lore.kernel.org/r/20230620-fidelity-variety-60b47c889e31@spudSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents d704f1fe 2bd9e071
......@@ -65,6 +65,7 @@ properties:
- items:
- enum:
- allwinner,sun20i-d1-plic
- thead,th1520-plic
- const: thead,c900-plic
- items:
- const: sifive,plic-1.0.0
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/riscv/thead.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: T-HEAD SoC-based boards
maintainers:
- Jisheng Zhang <jszhang@kernel.org>
description:
T-HEAD SoC-based boards
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A
items:
- enum:
- sipeed,lichee-pi-4a
- const: sipeed,lichee-module-4a
- const: thead,th1520
additionalProperties: true
...
......@@ -37,6 +37,7 @@ properties:
- items:
- enum:
- allwinner,sun20i-d1-clint
- thead,th1520-clint
- const: thead,c900-clint
- items:
- const: sifive,clint0
......
......@@ -18163,6 +18163,14 @@ F: drivers/perf/riscv_pmu.c
F: drivers/perf/riscv_pmu_legacy.c
F: drivers/perf/riscv_pmu_sbi.c
RISC-V THEAD SoC SUPPORT
M: Jisheng Zhang <jszhang@kernel.org>
M: Guo Ren <guoren@kernel.org>
M: Fu Wei <wefu@redhat.com>
L: linux-riscv@lists.infradead.org
S: Maintained
F: arch/riscv/boot/dts/thead/
RNBD BLOCK DRIVERS
M: Md. Haris Iqbal <haris.iqbal@ionos.com>
M: Jack Wang <jinpu.wang@ionos.com>
......
......@@ -41,6 +41,12 @@ config ARCH_SUNXI
This enables support for Allwinner sun20i platform hardware,
including boards based on the D1 and D1s SoCs.
config ARCH_THEAD
bool "T-HEAD RISC-V SoCs"
select ERRATA_THEAD
help
This enables support for the RISC-V based T-HEAD SoCs.
config ARCH_VIRT
def_bool SOC_VIRT
......
# SPDX-License-Identifier: GPL-2.0
subdir-y += allwinner
subdir-y += sifive
subdir-y += starfive
subdir-y += canaan
subdir-y += microchip
subdir-y += renesas
subdir-y += sifive
subdir-y += starfive
subdir-y += thead
obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_THEAD) += th1520-lichee-pi-4a.dtb
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
*/
/dts-v1/;
#include "th1520.dtsi"
/ {
model = "Sipeed Lichee Module 4A";
compatible = "sipeed,lichee-module-4a", "thead,th1520";
memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x2 0x00000000>;
};
};
&osc {
clock-frequency = <24000000>;
};
&osc_32k {
clock-frequency = <32768>;
};
&apb_clk {
clock-frequency = <62500000>;
};
&uart_sclk {
clock-frequency = <100000000>;
};
&dmac0 {
status = "okay";
};
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
*/
#include "th1520-lichee-module-4a.dtsi"
/ {
model = "Sipeed Lichee Pi 4A";
compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", "thead,th1520";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
status = "okay";
};
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021 Alibaba Group Holding Limited.
* Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
*/
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "thead,th1520";
#address-cells = <2>;
#size-cells = <2>;
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <3000000>;
c910_0: cpu@0 {
compatible = "thead,c910", "riscv";
device_type = "cpu";
riscv,isa = "rv64imafdc";
reg = <0>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
i-cache-sets = <512>;
d-cache-block-size = <64>;
d-cache-size = <65536>;
d-cache-sets = <512>;
next-level-cache = <&l2_cache>;
mmu-type = "riscv,sv39";
cpu0_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
};
c910_1: cpu@1 {
compatible = "thead,c910", "riscv";
device_type = "cpu";
riscv,isa = "rv64imafdc";
reg = <1>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
i-cache-sets = <512>;
d-cache-block-size = <64>;
d-cache-size = <65536>;
d-cache-sets = <512>;
next-level-cache = <&l2_cache>;
mmu-type = "riscv,sv39";
cpu1_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
};
c910_2: cpu@2 {
compatible = "thead,c910", "riscv";
device_type = "cpu";
riscv,isa = "rv64imafdc";
reg = <2>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
i-cache-sets = <512>;
d-cache-block-size = <64>;
d-cache-size = <65536>;
d-cache-sets = <512>;
next-level-cache = <&l2_cache>;
mmu-type = "riscv,sv39";
cpu2_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
};
c910_3: cpu@3 {
compatible = "thead,c910", "riscv";
device_type = "cpu";
riscv,isa = "rv64imafdc";
reg = <3>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
i-cache-sets = <512>;
d-cache-block-size = <64>;
d-cache-size = <65536>;
d-cache-sets = <512>;
next-level-cache = <&l2_cache>;
mmu-type = "riscv,sv39";
cpu3_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
};
l2_cache: l2-cache {
compatible = "cache";
cache-block-size = <64>;
cache-level = <2>;
cache-size = <1048576>;
cache-sets = <1024>;
cache-unified;
};
};
osc: oscillator {
compatible = "fixed-clock";
clock-output-names = "osc_24m";
#clock-cells = <0>;
};
osc_32k: 32k-oscillator {
compatible = "fixed-clock";
clock-output-names = "osc_32k";
#clock-cells = <0>;
};
apb_clk: apb-clk-clock {
compatible = "fixed-clock";
clock-output-names = "apb_clk";
#clock-cells = <0>;
};
uart_sclk: uart-sclk-clock {
compatible = "fixed-clock";
clock-output-names = "uart_sclk";
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
plic: interrupt-controller@ffd8000000 {
compatible = "thead,th1520-plic", "thead,c900-plic";
reg = <0xff 0xd8000000 0x0 0x01000000>;
interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
<&cpu1_intc 11>, <&cpu1_intc 9>,
<&cpu2_intc 11>, <&cpu2_intc 9>,
<&cpu3_intc 11>, <&cpu3_intc 9>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
riscv,ndev = <240>;
};
clint: timer@ffdc000000 {
compatible = "thead,th1520-clint", "thead,c900-clint";
reg = <0xff 0xdc000000 0x0 0x00010000>;
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
<&cpu1_intc 3>, <&cpu1_intc 7>,
<&cpu2_intc 3>, <&cpu2_intc 7>,
<&cpu3_intc 3>, <&cpu3_intc 7>;
};
uart0: serial@ffe7014000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7014000 0x0 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_sclk>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart1: serial@ffe7f00000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f00000 0x0 0x100>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_sclk>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart3: serial@ffe7f04000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f04000 0x0 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_sclk>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
gpio2: gpio@ffe7f34000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f34000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio3: gpio@ffe7f38000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f38000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
portd: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio0: gpio@ffec005000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xec005000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio1: gpio@ffec006000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xec006000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
};
};
uart2: serial@ffec010000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xec010000 0x0 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_sclk>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
dmac0: dma-controller@ffefc00000 {
compatible = "snps,axi-dma-1.01a";
reg = <0xff 0xefc00000 0x0 0x1000>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb_clk>, <&apb_clk>;
clock-names = "core-clk", "cfgr-clk";
#dma-cells = <1>;
dma-channels = <4>;
snps,block-size = <65536 65536 65536 65536>;
snps,priority = <0 1 2 3>;
snps,dma-masters = <1>;
snps,data-width = <4>;
snps,axi-max-burst-len = <16>;
status = "disabled";
};
timer0: timer@ffefc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer1: timer@ffefc32014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32014 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer2: timer@ffefc32028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32028 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer3: timer@ffefc3203c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc3203c 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@fff7f08000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f08000 0x0 0x4000>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_sclk>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart5: serial@fff7f0c000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f0c000 0x0 0x4000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_sclk>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
timer4: timer@ffffc33000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33000 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer5: timer@ffffc33014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33014 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer6: timer@ffffc33028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33028 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer7: timer@ffffc3303c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc3303c 0x0 0x14>;
clocks = <&apb_clk>;
clock-names = "timer";
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ao_gpio0: gpio@fffff41000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff41000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
porte: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
};
};
ao_gpio1: gpio@fffff52000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff52000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
portf: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
......@@ -27,6 +27,7 @@ CONFIG_EXPERT=y
CONFIG_PROFILING=y
CONFIG_SOC_MICROCHIP_POLARFIRE=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_THEAD=y
CONFIG_SOC_SIFIVE=y
CONFIG_SOC_STARFIVE=y
CONFIG_ARCH_SUNXI=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment