Commit d93e2600 authored by Heiko Stübner's avatar Heiko Stübner Committed by Felipe Balbi

usb: gadget: s3c-hsudc: use udc_start and udc_stop functions

udc_start and udc_stop reduce code duplication in comparison to
start and stop generalising calls done by all drivers
(i.e. bind and unbind) and moving these calls to common code.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 103495aa
......@@ -282,8 +282,7 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
* All the endpoints are stopped and any pending transfer requests if any on
* the endpoint are terminated.
*/
static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
struct usb_gadget_driver *driver)
static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc)
{
struct s3c_hsudc_ep *hsep;
int epnum;
......@@ -295,10 +294,6 @@ static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
hsep->stopped = 1;
s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
}
spin_unlock(&hsudc->lock);
driver->disconnect(&hsudc->gadget);
spin_lock(&hsudc->lock);
}
/**
......@@ -1135,16 +1130,15 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
return IRQ_HANDLED;
}
static int s3c_hsudc_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *))
static int s3c_hsudc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct s3c_hsudc *hsudc = the_controller;
int ret;
if (!driver
|| driver->max_speed < USB_SPEED_FULL
|| !bind
|| !driver->unbind || !driver->disconnect || !driver->setup)
|| !driver->setup)
return -EINVAL;
if (!hsudc)
......@@ -1155,17 +1149,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
hsudc->driver = driver;
hsudc->gadget.dev.driver = &driver->driver;
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
ret = bind(&hsudc->gadget);
if (ret) {
dev_err(hsudc->dev, "%s: bind failed\n", hsudc->gadget.name);
device_del(&hsudc->gadget.dev);
hsudc->driver = NULL;
hsudc->gadget.dev.driver = NULL;
return ret;
}
/* connect to bus through transceiver */
if (hsudc->transceiver) {
......@@ -1173,8 +1156,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
if (ret) {
dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
hsudc->gadget.name);
driver->unbind(&hsudc->gadget);
hsudc->driver = NULL;
hsudc->gadget.dev.driver = NULL;
return ret;
......@@ -1192,7 +1173,8 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
return 0;
}
static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
static int s3c_hsudc_stop(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct s3c_hsudc *hsudc = the_controller;
unsigned long flags;
......@@ -1200,21 +1182,22 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
if (!hsudc)
return -ENODEV;
if (!driver || driver != hsudc->driver || !driver->unbind)
if (!driver || driver != hsudc->driver)
return -EINVAL;
spin_lock_irqsave(&hsudc->lock, flags);
hsudc->driver = 0;
hsudc->driver = NULL;
hsudc->gadget.dev.driver = NULL;
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
s3c_hsudc_uninit_phy();
if (hsudc->pd->gpio_uninit)
hsudc->pd->gpio_uninit();
s3c_hsudc_stop_activity(hsudc, driver);
s3c_hsudc_stop_activity(hsudc);
spin_unlock_irqrestore(&hsudc->lock, flags);
if (hsudc->transceiver)
(void) otg_set_peripheral(hsudc->transceiver, NULL);
driver->unbind(&hsudc->gadget);
disable_irq(hsudc->irq);
dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
......@@ -1247,8 +1230,8 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
.get_frame = s3c_hsudc_gadget_getframe,
.start = s3c_hsudc_start,
.stop = s3c_hsudc_stop,
.udc_start = s3c_hsudc_start,
.udc_stop = s3c_hsudc_stop,
.vbus_draw = s3c_hsudc_vbus_draw,
};
......@@ -1310,6 +1293,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
hsudc->gadget.is_otg = 0;
hsudc->gadget.is_a_peripheral = 0;
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
s3c_hsudc_setup_ep(hsudc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment