Commit d94f944e authored by Anton Vorontsov's avatar Anton Vorontsov

ARM: cns3xxx: Add basic support for Cavium Networks CNS3xxx processors

This patch adds very basic support for ECONA CNS3xxx ARM11 MPcore
(ARMv6) dual-core processors.

Note that SMP is not yet supported, as well as many peripheral
devices. Support for these features will be added later.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@mvista.com>
parent ea5ce655
...@@ -586,6 +586,12 @@ F: drivers/mtd/nand/bcm_umi_bch.c ...@@ -586,6 +586,12 @@ F: drivers/mtd/nand/bcm_umi_bch.c
F: drivers/mtd/nand/bcm_umi_hamming.c F: drivers/mtd/nand/bcm_umi_hamming.c
F: drivers/mtd/nand/nand_bcm_umi.h F: drivers/mtd/nand/nand_bcm_umi.h
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
M: Anton Vorontsov <avorontsov@mvista.com>
S: Maintained
F: arch/arm/mach-cns3xxx/
T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com> M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Ryan Mallon <ryan@bluewatersys.com> M: Ryan Mallon <ryan@bluewatersys.com>
......
...@@ -297,6 +297,15 @@ config ARCH_CLPS711X ...@@ -297,6 +297,15 @@ config ARCH_CLPS711X
help help
Support for Cirrus Logic 711x/721x based boards. Support for Cirrus Logic 711x/721x based boards.
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARM_GIC
help
Support for Cavium Networks CNS3XXX platform.
config ARCH_GEMINI config ARCH_GEMINI
bool "Cortina Systems Gemini" bool "Cortina Systems Gemini"
select CPU_FA526 select CPU_FA526
...@@ -817,6 +826,8 @@ source "arch/arm/mach-bcmring/Kconfig" ...@@ -817,6 +826,8 @@ source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-dove/Kconfig" source "arch/arm/mach-dove/Kconfig"
......
...@@ -121,6 +121,7 @@ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 ...@@ -121,6 +121,7 @@ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_AT91) := at91 machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_DOVE) := dove machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110 machine-$(CONFIG_ARCH_EBSA110) := ebsa110
......
menu "CNS3XXX platform type"
depends on ARCH_CNS3XXX
endmenu
obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00C00000
/*
* Copyright 1999 - 2003 ARM Limited
* Copyright 2000 Deep Blue Solutions Ltd
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
#include <mach/cns3xxx.h>
#include "core.h"
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
.virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_GPIOA_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_GPIOB_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_MISC_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_MISC_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_PM_BASE_VIRT,
.pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
void __init cns3xxx_map_io(void)
{
iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
}
/* used by entry-macro.S */
void __iomem *gic_cpu_base_addr;
void __init cns3xxx_init_irq(void)
{
gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29);
gic_cpu_init(0, gic_cpu_base_addr);
}
void cns3xxx_power_off(void)
{
u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT);
u32 clkctrl;
printk(KERN_INFO "powering system down...\n");
clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
clkctrl &= 0xfffff1ff;
clkctrl |= (0x5 << 9); /* Hibernate */
writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
}
/*
* Timer
*/
static void __iomem *cns3xxx_tmr1;
static void cns3xxx_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
int pclk = cns3xxx_cpu_clock() / 8;
int reload;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
reload = pclk * 20 / (3 * HZ) * 0x25000;
writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* period set, and timer enabled in 'next_event' hook */
ctrl |= (1 << 2) | (1 << 9);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
ctrl = 0;
}
writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
}
static int cns3xxx_timer_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
return 0;
}
static struct clock_event_device cns3xxx_tmr1_clockevent = {
.name = "cns3xxx timer1",
.shift = 8,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = cns3xxx_timer_set_mode,
.set_next_event = cns3xxx_timer_set_next_event,
.rating = 350,
.cpumask = cpu_all_mask,
};
static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
{
cns3xxx_tmr1_clockevent.irq = timer_irq;
cns3xxx_tmr1_clockevent.mult =
div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
cns3xxx_tmr1_clockevent.shift);
cns3xxx_tmr1_clockevent.max_delta_ns =
clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
cns3xxx_tmr1_clockevent.min_delta_ns =
clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
clockevents_register_device(&cns3xxx_tmr1_clockevent);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
u32 val;
/* Clear the interrupt */
val = readl(stat);
writel(val & ~(1 << 2), stat);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction cns3xxx_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = cns3xxx_timer_interrupt,
};
/*
* Set up the clock source and clock events devices
*/
static void __init __cns3xxx_timer_init(unsigned int timer_irq)
{
u32 val;
u32 irq_mask;
/*
* Initialise to a known state (all timers off)
*/
/* disable timer1 and timer2 */
writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* stop free running timer3 */
writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
/* timer1 */
writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
/* mask irq, non-mask timer1 overflow */
irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
irq_mask &= ~(1 << 2);
irq_mask |= 0x03;
writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
/* down counter */
val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
val |= (1 << 9);
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* timer2 */
writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
/* mask irq */
irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
/* down counter */
val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
val |= (1 << 10);
writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
/* Make irqs happen for the system timer */
setup_irq(timer_irq, &cns3xxx_timer_irq);
cns3xxx_clockevents_init(timer_irq);
}
static void __init cns3xxx_timer_init(void)
{
cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT);
__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
}
struct sys_timer cns3xxx_timer = {
.init = cns3xxx_timer_init,
};
/*
* Copyright 2000 Deep Blue Solutions Ltd
* Copyright 2004 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __CNS3XXX_CORE_H
#define __CNS3XXX_CORE_H
extern void __iomem *gic_cpu_base_addr;
extern struct sys_timer cns3xxx_timer;
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
void cns3xxx_pwr_power_up(unsigned int block);
void cns3xxx_pwr_power_down(unsigned int block);
#endif /* __CNS3XXX_CORE_H */
/*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_BOARD_CNS3XXXH
#define __MACH_BOARD_CNS3XXXH
/*
* Memory map
*/
#define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */
#define CNS3XXX_FLASH_SIZE SZ_256M
#define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */
#define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */
#define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */
#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000
#define CNS3XXX_PPE_BASE 0x70001000 /* HANT */
#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000
#define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */
#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000
#define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */
#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000
#define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */
#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000
#define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */
#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000
#define SMC_MEMC_STATUS_OFFSET 0x000
#define SMC_MEMIF_CFG_OFFSET 0x004
#define SMC_MEMC_CFG_SET_OFFSET 0x008
#define SMC_MEMC_CFG_CLR_OFFSET 0x00C
#define SMC_DIRECT_CMD_OFFSET 0x010
#define SMC_SET_CYCLES_OFFSET 0x014
#define SMC_SET_OPMODE_OFFSET 0x018
#define SMC_REFRESH_PERIOD_0_OFFSET 0x020
#define SMC_REFRESH_PERIOD_1_OFFSET 0x024
#define SMC_SRAM_CYCLES0_0_OFFSET 0x100
#define SMC_NAND_CYCLES0_0_OFFSET 0x100
#define SMC_OPMODE0_0_OFFSET 0x104
#define SMC_SRAM_CYCLES0_1_OFFSET 0x120
#define SMC_NAND_CYCLES0_1_OFFSET 0x120
#define SMC_OPMODE0_1_OFFSET 0x124
#define SMC_USER_STATUS_OFFSET 0x200
#define SMC_USER_CONFIG_OFFSET 0x204
#define SMC_ECC_STATUS_OFFSET 0x300
#define SMC_ECC_MEMCFG_OFFSET 0x304
#define SMC_ECC_MEMCOMMAND1_OFFSET 0x308
#define SMC_ECC_MEMCOMMAND2_OFFSET 0x30C
#define SMC_ECC_ADDR0_OFFSET 0x310
#define SMC_ECC_ADDR1_OFFSET 0x314
#define SMC_ECC_VALUE0_OFFSET 0x318
#define SMC_ECC_VALUE1_OFFSET 0x31C
#define SMC_ECC_VALUE2_OFFSET 0x320
#define SMC_ECC_VALUE3_OFFSET 0x324
#define SMC_PERIPH_ID_0_OFFSET 0xFE0
#define SMC_PERIPH_ID_1_OFFSET 0xFE4
#define SMC_PERIPH_ID_2_OFFSET 0xFE8
#define SMC_PERIPH_ID_3_OFFSET 0xFEC
#define SMC_PCELL_ID_0_OFFSET 0xFF0
#define SMC_PCELL_ID_1_OFFSET 0xFF4
#define SMC_PCELL_ID_2_OFFSET 0xFF8
#define SMC_PCELL_ID_3_OFFSET 0xFFC
#define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */
#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000
#define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */
#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000
#define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */
#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000
#define RTC_SEC_OFFSET 0x00
#define RTC_MIN_OFFSET 0x04
#define RTC_HOUR_OFFSET 0x08
#define RTC_DAY_OFFSET 0x0C
#define RTC_SEC_ALM_OFFSET 0x10
#define RTC_MIN_ALM_OFFSET 0x14
#define RTC_HOUR_ALM_OFFSET 0x18
#define RTC_REC_OFFSET 0x1C
#define RTC_CTRL_OFFSET 0x20
#define RTC_INTR_STS_OFFSET 0x34
#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */
#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
#define CNS3XXX_PM_BASE_VIRT 0xFFF08000
#define PM_CLK_GATE_OFFSET 0x00
#define PM_SOFT_RST_OFFSET 0x04
#define PM_HS_CFG_OFFSET 0x08
#define PM_CACTIVE_STA_OFFSET 0x0C
#define PM_PWR_STA_OFFSET 0x10
#define PM_SYS_CLK_CTRL_OFFSET 0x14
#define PM_PLL_LCD_I2S_CTRL_OFFSET 0x18
#define PM_PLL_HM_PD_OFFSET 0x1C
#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000
#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000
#define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */
#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000
#define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */
#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000
#define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */
#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000
#define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */
#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000
#define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */
#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000
#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800
#define TIMER1_COUNTER_OFFSET 0x00
#define TIMER1_AUTO_RELOAD_OFFSET 0x04
#define TIMER1_MATCH_V1_OFFSET 0x08
#define TIMER1_MATCH_V2_OFFSET 0x0C
#define TIMER2_COUNTER_OFFSET 0x10
#define TIMER2_AUTO_RELOAD_OFFSET 0x14
#define TIMER2_MATCH_V1_OFFSET 0x18
#define TIMER2_MATCH_V2_OFFSET 0x1C
#define TIMER1_2_CONTROL_OFFSET 0x30
#define TIMER1_2_INTERRUPT_STATUS_OFFSET 0x34
#define TIMER1_2_INTERRUPT_MASK_OFFSET 0x38
#define TIMER_FREERUN_OFFSET 0x40
#define TIMER_FREERUN_CONTROL_OFFSET 0x44
#define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */
#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000
#define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */
#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000
#define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */
#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000
#define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */
#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000
#define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */
#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000
#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */
#define CNS3XXX_USB_BASE_VIRT 0xFFF16000
#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */
#define CNS3XXX_SATA2_SIZE SZ_16M
#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000
#define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */
#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000
#define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */
#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000
#define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */
#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000
#define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */
#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000
#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */
#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000
#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */
#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000
#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */
#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000
#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */
#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000
#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */
#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000
#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */
#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000
#define CNS3XXX_PCIE0_CFG1_BASE 0xAE000000 /* PCIe Port 0 CFG Type 1 */
#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000
#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */
#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000
#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */
#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000
#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */
#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000
#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */
#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000
#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */
#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000
#define CNS3XXX_PCIE1_CFG1_BASE 0xBE000000 /* PCIe Port 1 CFG Type 1 */
#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000
#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */
#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000
/*
* Testchip peripheral and fpga gic regions
*/
#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000
#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100
#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600
#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000
#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000
/*
* Misc block
*/
#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP_VALUE(0x00)
#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP_VALUE(0x04)
#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP_VALUE(0x08)
#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP_VALUE(0x0C)
#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP_VALUE(0x10)
#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x14)
#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x18)
#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP_VALUE(0x1C)
#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP_VALUE(0x20)
#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x24)
#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x28)
#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x2C)
#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x30)
#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x34)
#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP_VALUE(0x40)
#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP_VALUE(0x44)
#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP_VALUE(0x48)
#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP_VALUE(0x4C)
#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP_VALUE(0x50)
#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP_VALUE(0x54)
#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310)
#define MISC_USB_CFG_REG MISC_MEM_MAP_VALUE(0x800)
#define MISC_USB_STS_REG MISC_MEM_MAP_VALUE(0x804)
#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP_VALUE(0x808)
#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP_VALUE(0x80c)
#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP_VALUE(0x810)
#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP_VALUE(0x814)
#define MISC_PCIEPHY_CMCTL(x) MISC_MEM_MAP(0x900 + (x) * 0x004)
#define MISC_PCIEPHY_CTL(x) MISC_MEM_MAP(0x940 + (x) * 0x100)
#define MISC_PCIE_AXIS_AWMISC(x) MISC_MEM_MAP(0x944 + (x) * 0x100)
#define MISC_PCIE_AXIS_ARMISC(x) MISC_MEM_MAP(0x948 + (x) * 0x100)
#define MISC_PCIE_AXIS_RMISC(x) MISC_MEM_MAP(0x94C + (x) * 0x100)
#define MISC_PCIE_AXIS_BMISC(x) MISC_MEM_MAP(0x950 + (x) * 0x100)
#define MISC_PCIE_AXIM_RMISC(x) MISC_MEM_MAP(0x954 + (x) * 0x100)
#define MISC_PCIE_AXIM_BMISC(x) MISC_MEM_MAP(0x958 + (x) * 0x100)
#define MISC_PCIE_CTRL(x) MISC_MEM_MAP(0x95C + (x) * 0x100)
#define MISC_PCIE_PM_DEBUG(x) MISC_MEM_MAP(0x960 + (x) * 0x100)
#define MISC_PCIE_RFC_DEBUG(x) MISC_MEM_MAP(0x964 + (x) * 0x100)
#define MISC_PCIE_CXPL_DEBUGL(x) MISC_MEM_MAP(0x968 + (x) * 0x100)
#define MISC_PCIE_CXPL_DEBUGH(x) MISC_MEM_MAP(0x96C + (x) * 0x100)
#define MISC_PCIE_DIAG_DEBUGH(x) MISC_MEM_MAP(0x970 + (x) * 0x100)
#define MISC_PCIE_W1CLR(x) MISC_MEM_MAP(0x974 + (x) * 0x100)
#define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100)
#define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100)
/*
* Power management and clock control
*/
#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
#define PM_CLK_GATE_REG PMU_REG_VALUE(0x000)
#define PM_SOFT_RST_REG PMU_REG_VALUE(0x004)
#define PM_HS_CFG_REG PMU_REG_VALUE(0x008)
#define PM_CACTIVE_STA_REG PMU_REG_VALUE(0x00C)
#define PM_PWR_STA_REG PMU_REG_VALUE(0x010)
#define PM_CLK_CTRL_REG PMU_REG_VALUE(0x014)
#define PM_PLL_LCD_I2S_CTRL_REG PMU_REG_VALUE(0x018)
#define PM_PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x01C)
#define PM_REGULAT_CTRL_REG PMU_REG_VALUE(0x020)
#define PM_WDT_CTRL_REG PMU_REG_VALUE(0x024)
#define PM_WU_CTRL0_REG PMU_REG_VALUE(0x028)
#define PM_WU_CTRL1_REG PMU_REG_VALUE(0x02C)
#define PM_CSR_REG PMU_REG_VALUE(0x030)
/* PM_CLK_GATE_REG */
#define PM_CLK_GATE_REG_OFFSET_SDIO (25)
#define PM_CLK_GATE_REG_OFFSET_GPU (24)
#define PM_CLK_GATE_REG_OFFSET_CIM (23)
#define PM_CLK_GATE_REG_OFFSET_LCDC (22)
#define PM_CLK_GATE_REG_OFFSET_I2S (21)
#define PM_CLK_GATE_REG_OFFSET_RAID (20)
#define PM_CLK_GATE_REG_OFFSET_SATA (19)
#define PM_CLK_GATE_REG_OFFSET_PCIE(x) (17 + (x))
#define PM_CLK_GATE_REG_OFFSET_USB_HOST (16)
#define PM_CLK_GATE_REG_OFFSET_USB_OTG (15)
#define PM_CLK_GATE_REG_OFFSET_TIMER (14)
#define PM_CLK_GATE_REG_OFFSET_CRYPTO (13)
#define PM_CLK_GATE_REG_OFFSET_HCIE (12)
#define PM_CLK_GATE_REG_OFFSET_SWITCH (11)
#define PM_CLK_GATE_REG_OFFSET_GPIO (10)
#define PM_CLK_GATE_REG_OFFSET_UART3 (9)
#define PM_CLK_GATE_REG_OFFSET_UART2 (8)
#define PM_CLK_GATE_REG_OFFSET_UART1 (7)
#define PM_CLK_GATE_REG_OFFSET_RTC (5)
#define PM_CLK_GATE_REG_OFFSET_GDMA (4)
#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C (3)
#define PM_CLK_GATE_REG_OFFSET_SMC_NFI (1)
#define PM_CLK_GATE_REG_MASK (0x03FFFFBA)
/* PM_SOFT_RST_REG */
#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG (31)
#define PM_SOFT_RST_REG_OFFST_CPU1 (29)
#define PM_SOFT_RST_REG_OFFST_CPU0 (28)
#define PM_SOFT_RST_REG_OFFST_SDIO (25)
#define PM_SOFT_RST_REG_OFFST_GPU (24)
#define PM_SOFT_RST_REG_OFFST_CIM (23)
#define PM_SOFT_RST_REG_OFFST_LCDC (22)
#define PM_SOFT_RST_REG_OFFST_I2S (21)
#define PM_SOFT_RST_REG_OFFST_RAID (20)
#define PM_SOFT_RST_REG_OFFST_SATA (19)
#define PM_SOFT_RST_REG_OFFST_PCIE(x) (17 + (x))
#define PM_SOFT_RST_REG_OFFST_USB_HOST (16)
#define PM_SOFT_RST_REG_OFFST_USB_OTG (15)
#define PM_SOFT_RST_REG_OFFST_TIMER (14)
#define PM_SOFT_RST_REG_OFFST_CRYPTO (13)
#define PM_SOFT_RST_REG_OFFST_HCIE (12)
#define PM_SOFT_RST_REG_OFFST_SWITCH (11)
#define PM_SOFT_RST_REG_OFFST_GPIO (10)
#define PM_SOFT_RST_REG_OFFST_UART3 (9)
#define PM_SOFT_RST_REG_OFFST_UART2 (8)
#define PM_SOFT_RST_REG_OFFST_UART1 (7)
#define PM_SOFT_RST_REG_OFFST_RTC (5)
#define PM_SOFT_RST_REG_OFFST_GDMA (4)
#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C (3)
#define PM_SOFT_RST_REG_OFFST_DMC (2)
#define PM_SOFT_RST_REG_OFFST_SMC_NFI (1)
#define PM_SOFT_RST_REG_OFFST_GLOBAL (0)
#define PM_SOFT_RST_REG_MASK (0xF3FFFFBF)
/* PMHS_CFG_REG */
#define PM_HS_CFG_REG_OFFSET_SDIO (25)
#define PM_HS_CFG_REG_OFFSET_GPU (24)
#define PM_HS_CFG_REG_OFFSET_CIM (23)
#define PM_HS_CFG_REG_OFFSET_LCDC (22)
#define PM_HS_CFG_REG_OFFSET_I2S (21)
#define PM_HS_CFG_REG_OFFSET_RAID (20)
#define PM_HS_CFG_REG_OFFSET_SATA (19)
#define PM_HS_CFG_REG_OFFSET_PCIE1 (18)
#define PM_HS_CFG_REG_OFFSET_PCIE0 (17)
#define PM_HS_CFG_REG_OFFSET_USB_HOST (16)
#define PM_HS_CFG_REG_OFFSET_USB_OTG (15)
#define PM_HS_CFG_REG_OFFSET_TIMER (14)
#define PM_HS_CFG_REG_OFFSET_CRYPTO (13)
#define PM_HS_CFG_REG_OFFSET_HCIE (12)
#define PM_HS_CFG_REG_OFFSET_SWITCH (11)
#define PM_HS_CFG_REG_OFFSET_GPIO (10)
#define PM_HS_CFG_REG_OFFSET_UART3 (9)
#define PM_HS_CFG_REG_OFFSET_UART2 (8)
#define PM_HS_CFG_REG_OFFSET_UART1 (7)
#define PM_HS_CFG_REG_OFFSET_RTC (5)
#define PM_HS_CFG_REG_OFFSET_GDMA (4)
#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S (3)
#define PM_HS_CFG_REG_OFFSET_DMC (2)
#define PM_HS_CFG_REG_OFFSET_SMC_NFI (1)
#define PM_HS_CFG_REG_MASK (0x03FFFFBE)
#define PM_HS_CFG_REG_MASK_SUPPORT (0x01100806)
/* PM_CACTIVE_STA_REG */
#define PM_CACTIVE_STA_REG_OFFSET_SDIO (25)
#define PM_CACTIVE_STA_REG_OFFSET_GPU (24)
#define PM_CACTIVE_STA_REG_OFFSET_CIM (23)
#define PM_CACTIVE_STA_REG_OFFSET_LCDC (22)
#define PM_CACTIVE_STA_REG_OFFSET_I2S (21)
#define PM_CACTIVE_STA_REG_OFFSET_RAID (20)
#define PM_CACTIVE_STA_REG_OFFSET_SATA (19)
#define PM_CACTIVE_STA_REG_OFFSET_PCIE1 (18)
#define PM_CACTIVE_STA_REG_OFFSET_PCIE0 (17)
#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST (16)
#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG (15)
#define PM_CACTIVE_STA_REG_OFFSET_TIMER (14)
#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO (13)
#define PM_CACTIVE_STA_REG_OFFSET_HCIE (12)
#define PM_CACTIVE_STA_REG_OFFSET_SWITCH (11)
#define PM_CACTIVE_STA_REG_OFFSET_GPIO (10)
#define PM_CACTIVE_STA_REG_OFFSET_UART3 (9)
#define PM_CACTIVE_STA_REG_OFFSET_UART2 (8)
#define PM_CACTIVE_STA_REG_OFFSET_UART1 (7)
#define PM_CACTIVE_STA_REG_OFFSET_RTC (5)
#define PM_CACTIVE_STA_REG_OFFSET_GDMA (4)
#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S (3)
#define PM_CACTIVE_STA_REG_OFFSET_DMC (2)
#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI (1)
#define PM_CACTIVE_STA_REG_MASK (0x03FFFFBE)
/* PM_PWR_STA_REG */
#define PM_PWR_STA_REG_REG_OFFSET_SDIO (25)
#define PM_PWR_STA_REG_REG_OFFSET_GPU (24)
#define PM_PWR_STA_REG_REG_OFFSET_CIM (23)
#define PM_PWR_STA_REG_REG_OFFSET_LCDC (22)
#define PM_PWR_STA_REG_REG_OFFSET_I2S (21)
#define PM_PWR_STA_REG_REG_OFFSET_RAID (20)
#define PM_PWR_STA_REG_REG_OFFSET_SATA (19)
#define PM_PWR_STA_REG_REG_OFFSET_PCIE1 (18)
#define PM_PWR_STA_REG_REG_OFFSET_PCIE0 (17)
#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST (16)
#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG (15)
#define PM_PWR_STA_REG_REG_OFFSET_TIMER (14)
#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO (13)
#define PM_PWR_STA_REG_REG_OFFSET_HCIE (12)
#define PM_PWR_STA_REG_REG_OFFSET_SWITCH (11)
#define PM_PWR_STA_REG_REG_OFFSET_GPIO (10)
#define PM_PWR_STA_REG_REG_OFFSET_UART3 (9)
#define PM_PWR_STA_REG_REG_OFFSET_UART2 (8)
#define PM_PWR_STA_REG_REG_OFFSET_UART1 (7)
#define PM_PWR_STA_REG_REG_OFFSET_RTC (5)
#define PM_PWR_STA_REG_REG_OFFSET_GDMA (4)
#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S (3)
#define PM_PWR_STA_REG_REG_OFFSET_DMC (2)
#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI (1)
#define PM_PWR_STA_REG_REG_MASK (0x03FFFFBE)
/* PM_CLK_CTRL_REG */
#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK (31)
#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN (30)
#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN (29)
#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN (28)
#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE (27)
#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV (24)
#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL (22)
#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV (20)
#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL (16)
#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV (14)
#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL (12)
#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE (9)
#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL (7)
#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE (6)
#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV (4)
#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL (0)
#define PM_CPU_CLK_DIV(DIV) { \
PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
}
#define PM_PLL_CPU_SEL(CPU) { \
PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
}
/* PM_PLL_LCD_I2S_CTRL_REG */
#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV (22)
#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL (17)
#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P (11)
#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M (3)
#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S (0)
/* PM_PLL_HM_PD_CTRL_REG */
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1 (11)
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0 (10)
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD (6)
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S (5)
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD (4)
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB (3)
#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII (2)
#define PM_PLL_HM_PD_CTRL_REG_MASK (0x00000C7C)
/* PM_WDT_CTRL_REG */
#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY (0)
/* PM_CSR_REG - Clock Scaling Register*/
#define PM_CSR_REG_OFFSET_CSR_EN (30)
#define PM_CSR_REG_OFFSET_CSR_NUM (0)
#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
/* Software reset*/
#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
/*
* CNS3XXX support several power saving mode as following,
* DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
*/
#define CNS3XXX_PWR_CPU_MODE_DFS (0)
#define CNS3XXX_PWR_CPU_MODE_IDLE (1)
#define CNS3XXX_PWR_CPU_MODE_HALT (2)
#define CNS3XXX_PWR_CPU_MODE_DOZE (3)
#define CNS3XXX_PWR_CPU_MODE_SLEEP (4)
#define CNS3XXX_PWR_CPU_MODE_HIBERNATE (5)
#define CNS3XXX_PWR_PLL(BLOCK) (0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
#define CNS3XXX_PWR_PLL_ALL PM_PLL_HM_PD_CTRL_REG_MASK
/* Change CPU frequency and divider */
#define CNS3XXX_PWR_PLL_CPU_300MHZ (0)
#define CNS3XXX_PWR_PLL_CPU_333MHZ (1)
#define CNS3XXX_PWR_PLL_CPU_366MHZ (2)
#define CNS3XXX_PWR_PLL_CPU_400MHZ (3)
#define CNS3XXX_PWR_PLL_CPU_433MHZ (4)
#define CNS3XXX_PWR_PLL_CPU_466MHZ (5)
#define CNS3XXX_PWR_PLL_CPU_500MHZ (6)
#define CNS3XXX_PWR_PLL_CPU_533MHZ (7)
#define CNS3XXX_PWR_PLL_CPU_566MHZ (8)
#define CNS3XXX_PWR_PLL_CPU_600MHZ (9)
#define CNS3XXX_PWR_PLL_CPU_633MHZ (10)
#define CNS3XXX_PWR_PLL_CPU_666MHZ (11)
#define CNS3XXX_PWR_PLL_CPU_700MHZ (12)
#define CNS3XXX_PWR_CPU_CLK_DIV_BY1 (0)
#define CNS3XXX_PWR_CPU_CLK_DIV_BY2 (1)
#define CNS3XXX_PWR_CPU_CLK_DIV_BY4 (2)
/* Change DDR2 frequency */
#define CNS3XXX_PWR_PLL_DDR2_200MHZ (0)
#define CNS3XXX_PWR_PLL_DDR2_266MHZ (1)
#define CNS3XXX_PWR_PLL_DDR2_333MHZ (2)
#define CNS3XXX_PWR_PLL_DDR2_400MHZ (3)
void cns3xxx_pwr_soft_rst(unsigned int block);
void cns3xxx_pwr_clk_en(unsigned int block);
int cns3xxx_cpu_clock(void);
/*
* ARM11 MPCore interrupt sources (primary GIC)
*/
#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0)
#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1)
#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2)
#define IRQ_CNS3XXX_RTC (IRQ_TC11MP_GIC_START + 3)
#define IRQ_CNS3XXX_I2S (IRQ_TC11MP_GIC_START + 4)
#define IRQ_CNS3XXX_PCM (IRQ_TC11MP_GIC_START + 5)
#define IRQ_CNS3XXX_SPI (IRQ_TC11MP_GIC_START + 6)
#define IRQ_CNS3XXX_I2C (IRQ_TC11MP_GIC_START + 7)
#define IRQ_CNS3XXX_CIM (IRQ_TC11MP_GIC_START + 8)
#define IRQ_CNS3XXX_GPU (IRQ_TC11MP_GIC_START + 9)
#define IRQ_CNS3XXX_LCD (IRQ_TC11MP_GIC_START + 10)
#define IRQ_CNS3XXX_GPIOA (IRQ_TC11MP_GIC_START + 11)
#define IRQ_CNS3XXX_GPIOB (IRQ_TC11MP_GIC_START + 12)
#define IRQ_CNS3XXX_UART0 (IRQ_TC11MP_GIC_START + 13)
#define IRQ_CNS3XXX_UART1 (IRQ_TC11MP_GIC_START + 14)
#define IRQ_CNS3XXX_UART2 (IRQ_TC11MP_GIC_START + 15)
#define IRQ_CNS3XXX_ARM11 (IRQ_TC11MP_GIC_START + 16)
#define IRQ_CNS3XXX_SW_STATUS (IRQ_TC11MP_GIC_START + 17)
#define IRQ_CNS3XXX_SW_R0TXC (IRQ_TC11MP_GIC_START + 18)
#define IRQ_CNS3XXX_SW_R0RXC (IRQ_TC11MP_GIC_START + 19)
#define IRQ_CNS3XXX_SW_R0QE (IRQ_TC11MP_GIC_START + 20)
#define IRQ_CNS3XXX_SW_R0QF (IRQ_TC11MP_GIC_START + 21)
#define IRQ_CNS3XXX_SW_R1TXC (IRQ_TC11MP_GIC_START + 22)
#define IRQ_CNS3XXX_SW_R1RXC (IRQ_TC11MP_GIC_START + 23)
#define IRQ_CNS3XXX_SW_R1QE (IRQ_TC11MP_GIC_START + 24)
#define IRQ_CNS3XXX_SW_R1QF (IRQ_TC11MP_GIC_START + 25)
#define IRQ_CNS3XXX_SW_PPE (IRQ_TC11MP_GIC_START + 26)
#define IRQ_CNS3XXX_CRYPTO (IRQ_TC11MP_GIC_START + 27)
#define IRQ_CNS3XXX_HCIE (IRQ_TC11MP_GIC_START + 28)
#define IRQ_CNS3XXX_PCIE0_DEVICE (IRQ_TC11MP_GIC_START + 29)
#define IRQ_CNS3XXX_PCIE1_DEVICE (IRQ_TC11MP_GIC_START + 30)
#define IRQ_CNS3XXX_USB_OTG (IRQ_TC11MP_GIC_START + 31)
#define IRQ_CNS3XXX_USB_EHCI (IRQ_TC11MP_GIC_START + 32)
#define IRQ_CNS3XXX_SATA (IRQ_TC11MP_GIC_START + 33)
#define IRQ_CNS3XXX_RAID (IRQ_TC11MP_GIC_START + 34)
#define IRQ_CNS3XXX_SMC (IRQ_TC11MP_GIC_START + 35)
#define IRQ_CNS3XXX_DMAC_ABORT (IRQ_TC11MP_GIC_START + 36)
#define IRQ_CNS3XXX_DMAC0 (IRQ_TC11MP_GIC_START + 37)
#define IRQ_CNS3XXX_DMAC1 (IRQ_TC11MP_GIC_START + 38)
#define IRQ_CNS3XXX_DMAC2 (IRQ_TC11MP_GIC_START + 39)
#define IRQ_CNS3XXX_DMAC3 (IRQ_TC11MP_GIC_START + 40)
#define IRQ_CNS3XXX_DMAC4 (IRQ_TC11MP_GIC_START + 41)
#define IRQ_CNS3XXX_DMAC5 (IRQ_TC11MP_GIC_START + 42)
#define IRQ_CNS3XXX_DMAC6 (IRQ_TC11MP_GIC_START + 43)
#define IRQ_CNS3XXX_DMAC7 (IRQ_TC11MP_GIC_START + 44)
#define IRQ_CNS3XXX_DMAC8 (IRQ_TC11MP_GIC_START + 45)
#define IRQ_CNS3XXX_DMAC9 (IRQ_TC11MP_GIC_START + 46)
#define IRQ_CNS3XXX_DMAC10 (IRQ_TC11MP_GIC_START + 47)
#define IRQ_CNS3XXX_DMAC11 (IRQ_TC11MP_GIC_START + 48)
#define IRQ_CNS3XXX_DMAC12 (IRQ_TC11MP_GIC_START + 49)
#define IRQ_CNS3XXX_DMAC13 (IRQ_TC11MP_GIC_START + 50)
#define IRQ_CNS3XXX_DMAC14 (IRQ_TC11MP_GIC_START + 51)
#define IRQ_CNS3XXX_DMAC15 (IRQ_TC11MP_GIC_START + 52)
#define IRQ_CNS3XXX_DMAC16 (IRQ_TC11MP_GIC_START + 53)
#define IRQ_CNS3XXX_DMAC17 (IRQ_TC11MP_GIC_START + 54)
#define IRQ_CNS3XXX_PCIE0_RC (IRQ_TC11MP_GIC_START + 55)
#define IRQ_CNS3XXX_PCIE1_RC (IRQ_TC11MP_GIC_START + 56)
#define IRQ_CNS3XXX_TIMER0 (IRQ_TC11MP_GIC_START + 57)
#define IRQ_CNS3XXX_TIMER1 (IRQ_TC11MP_GIC_START + 58)
#define IRQ_CNS3XXX_USB_OHCI (IRQ_TC11MP_GIC_START + 59)
#define IRQ_CNS3XXX_TIMER2 (IRQ_TC11MP_GIC_START + 60)
#define IRQ_CNS3XXX_EXTERNAL_PIN0 (IRQ_TC11MP_GIC_START + 61)
#define IRQ_CNS3XXX_EXTERNAL_PIN1 (IRQ_TC11MP_GIC_START + 62)
#define IRQ_CNS3XXX_EXTERNAL_PIN2 (IRQ_TC11MP_GIC_START + 63)
#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64)
#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
#undef NR_IRQS
#define NR_IRQS NR_IRQS_CNS3XXX
#endif
#endif /* __MACH_BOARD_CNS3XXX_H */
/*
* Debugging macro include header
*
* Copyright 1994-1999 Russell King
* Copyright 2008 Cavium Networks
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf0000000 @ virtual base
orr \rx, \rx, #0x00009000
.endm
#include <asm/hardware/debug-pl01x.S>
/*
* Low-level IRQ helper macros for Cavium Networks platforms
*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm
/*
* This file contains the hardware definitions of the Cavium Networks boards.
*
* Copyright 2003 ARM Limited.
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#include <asm/sizes.h>
/* macro to get at IO space when running virtually */
#define PCIBIOS_MIN_IO 0x00000000
#define PCIBIOS_MIN_MEM 0x00000000
#define pcibios_assign_all_busses() 1
#endif
/*
* Copyright 2008 Cavium Networks
* Copyright 2003 ARM Limited
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_IO_H
#define __MACH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif
/*
* Copyright 2000 Deep Blue Solutions Ltd.
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
#define IRQ_TC11MP_GIC_START 32
#include <mach/cns3xxx.h>
#ifndef NR_IRQS
#error "NR_IRQS not defined by the board-specific files"
#endif
#endif
/*
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
#endif
/*
* Copyright 2000 Deep Blue Solutions Ltd
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <mach/hardware.h>
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
void arch_reset(char mode, const char *cmd);
#endif
/*
* Cavium Networks architecture timex specifications
*
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#define CLOCK_TICK_RATE (50000000 / 16)
/*
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/cns3xxx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
/*
* Return the UART base address
*/
static inline unsigned long get_uart_base(void)
{
if (machine_is_cns3420vb())
return CNS3XXX_UART0_BASE;
else
return 0;
}
/*
* This does not append a newline
*/
static inline void putc(int c)
{
unsigned long base = get_uart_base();
while (AMBA_UART_FR(base) & (1 << 5))
barrier();
AMBA_UART_DR(base) = c;
}
static inline void flush(void)
{
unsigned long base = get_uart_base();
while (AMBA_UART_FR(base) & (1 << 3))
barrier();
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()
/*
* Copyright 2000 Russell King.
* Copyright 2003 ARM Limited
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#define VMALLOC_END 0xd8000000
/*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <mach/system.h>
#include <mach/cns3xxx.h>
void cns3xxx_pwr_clk_en(unsigned int block)
{
PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
}
void cns3xxx_pwr_power_up(unsigned int block)
{
PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
/* Wait for 300us for the PLL output clock locked. */
udelay(300);
};
void cns3xxx_pwr_power_down(unsigned int block)
{
/* write '1' to power down */
PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
};
static void cns3xxx_pwr_soft_rst_force(unsigned int block)
{
/*
* bit 0, 28, 29 => program low to reset,
* the other else program low and then high
*/
if (block & 0x30000001) {
PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
} else {
PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
}
}
void cns3xxx_pwr_soft_rst(unsigned int block)
{
static unsigned int soft_reset;
if (soft_reset & block) {
/* SPI/I2C/GPIO use the same block, reset once. */
return;
} else {
soft_reset |= block;
}
cns3xxx_pwr_soft_rst_force(block);
}
void arch_reset(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register
* in the system FPGA.
*/
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
}
/*
* cns3xxx_cpu_clock - return CPU/L2 clock
* aclk: cpu clock/2
* hclk: cpu clock/4
* pclk: cpu clock/8
*/
int cns3xxx_cpu_clock(void)
{
int cpu;
int cpu_sel;
int div_sel;
cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
return cpu;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment