Commit dafbeadf authored by Bryan Wu's avatar Bryan Wu

ARM: mach-omap1: retire custom LED code

Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent 4ad54190
......@@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
# LEDs support
led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
obj-$(CONFIG_LEDS) += $(led-y)
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif
......@@ -31,6 +31,7 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -306,12 +307,39 @@ static struct platform_device h2_irda_device = {
.resource = h2_irda_resources,
};
static struct gpio_led h2_gpio_led_pins[] = {
{
.name = "h2:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "h2:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data h2_gpio_led_data = {
.leds = h2_gpio_led_pins,
.num_leds = ARRAY_SIZE(h2_gpio_led_pins),
};
static struct platform_device h2_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h2_gpio_led_data,
},
};
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
&h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
......@@ -406,6 +434,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
/* GPIO based LEDs */
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
......
......@@ -31,6 +31,7 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
......@@ -324,6 +325,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
static struct gpio_led h3_gpio_led_pins[] = {
{
.name = "h3:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "h3:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data h3_gpio_led_data = {
.leds = h3_gpio_led_pins,
.num_leds = ARRAY_SIZE(h3_gpio_led_pins),
};
static struct platform_device h3_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h3_gpio_led_data,
},
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
......@@ -331,6 +358,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
&h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
......@@ -398,6 +426,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
/* GPIO based LEDs */
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
......
......@@ -380,10 +380,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
static struct gpio_led mistral_gpio_led_pins[] = {
{
.name = "mistral:red",
.default_trigger = "heartbeat",
.gpio = 3,
},
{
.name = "mistral:green",
.default_trigger = "cpu0",
.gpio = OMAP_MPUIO(4),
},
};
static struct gpio_led_platform_data mistral_gpio_led_data = {
.leds = mistral_gpio_led_pins,
.num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
};
static struct platform_device mistral_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mistral_gpio_led_data,
},
};
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
&mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
......@@ -508,6 +535,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
/*
* GPIO based LEDs
*/
omap_cfg_reg(P18_1610_GPIO3);
omap_cfg_reg(MPUIO4);
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));
......
/*
* linux/arch/arm/mach-omap1/leds-h2p2-debug.c
*
* Copyright 2003 by Texas Instruments Incorporated
*
* There are 16 LEDs on the debug board (all green); four may be used
* for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
*
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators.
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
#include "leds.h"
#define GPIO_LED_RED 3
#define GPIO_LED_GREEN OMAP_MPUIO(4)
#define LED_STATE_ENABLED 0x01
#define LED_STATE_CLAIMED 0x02
#define LED_TIMER_ON 0x04
#define GPIO_IDLE GPIO_LED_GREEN
#define GPIO_TIMER GPIO_LED_RED
void h2p2_dbg_leds_event(led_event_t evt)
{
unsigned long flags;
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 led_state, hw_led_state;
local_irq_save(flags);
if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
goto done;
switch (evt) {
case led_start:
if (!fpga)
fpga = ioremap(H2P2_DBG_FPGA_START,
H2P2_DBG_FPGA_SIZE);
if (fpga) {
led_state |= LED_STATE_ENABLED;
__raw_writew(~0, &fpga->leds);
}
break;
case led_stop:
case led_halted:
/* all leds off during suspend or shutdown */
if (! machine_is_omap_perseus2()) {
gpio_set_value(GPIO_TIMER, 0);
gpio_set_value(GPIO_IDLE, 0);
}
__raw_writew(~0, &fpga->leds);
led_state &= ~LED_STATE_ENABLED;
if (evt == led_halted) {
iounmap(fpga);
fpga = NULL;
}
goto done;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
led_state ^= LED_TIMER_ON;
if (machine_is_omap_perseus2())
hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
else {
gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
goto done;
}
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
if (machine_is_omap_perseus2())
hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
else {
gpio_set_value(GPIO_IDLE, 1);
goto done;
}
break;
case led_idle_end:
if (machine_is_omap_perseus2())
hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
else {
gpio_set_value(GPIO_IDLE, 0);
goto done;
}
break;
#endif
case led_green_on:
hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
break;
case led_green_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
break;
case led_amber_on:
hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
break;
case led_amber_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
break;
case led_red_on:
hw_led_state |= H2P2_DBG_FPGA_LED_RED;
break;
case led_red_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
break;
case led_blue_on:
hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
break;
case led_blue_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
break;
default:
break;
}
/*
* Actually burn the LEDs
*/
if (led_state & LED_STATE_ENABLED)
__raw_writew(~hw_led_state, &fpga->leds);
done:
local_irq_restore(flags);
}
/*
* linux/arch/arm/mach-omap1/leds-innovator.c
*/
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include "leds.h"
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
static unsigned int led_state;
static unsigned int hw_led_state;
void innovator_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch (evt) {
case led_start:
hw_led_state = 0;
led_state = LED_STATE_ENABLED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = 0;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state ^= 0;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= 0;
break;
case led_idle_end:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~0;
break;
#endif
case led_halted:
break;
case led_green_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~0;
break;
case led_green_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= 0;
break;
case led_amber_on:
break;
case led_amber_off:
break;
case led_red_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~0;
break;
case led_red_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= 0;
break;
default:
break;
}
local_irq_restore(flags);
}
/*
* linux/arch/arm/mach-omap1/leds-osk.c
*
* LED driver for OSK with optional Mistral QVGA board
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include "leds.h"
#define LED_STATE_ENABLED (1 << 0)
#define LED_STATE_CLAIMED (1 << 1)
static u8 led_state;
#define TIMER_LED (1 << 3) /* Mistral board */
#define IDLE_LED (1 << 4) /* Mistral board */
static u8 hw_led_state;
#ifdef CONFIG_OMAP_OSK_MISTRAL
/* For now, all system indicators require the Mistral board, since that
* LED can be manipulated without a task context. This LED is either red,
* or green, but not both; it can't give the full "disco led" effect.
*/
#define GPIO_LED_RED 3
#define GPIO_LED_GREEN OMAP_MPUIO(4)
static void mistral_setled(void)
{
int red = 0;
int green = 0;
if (hw_led_state & TIMER_LED)
red = 1;
else if (hw_led_state & IDLE_LED)
green = 1;
/* else both sides are disabled */
gpio_set_value(GPIO_LED_GREEN, green);
gpio_set_value(GPIO_LED_RED, red);
}
#endif
void osk_leds_event(led_event_t evt)
{
unsigned long flags;
u16 leds;
local_irq_save(flags);
if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
goto done;
leds = hw_led_state;
switch (evt) {
case led_start:
led_state |= LED_STATE_ENABLED;
hw_led_state = 0;
leds = ~0;
break;
case led_halted:
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
leds = ~0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = 0;
break;
#ifdef CONFIG_OMAP_OSK_MISTRAL
case led_timer:
hw_led_state ^= TIMER_LED;
mistral_setled();
break;
case led_idle_start: /* idle == off */
hw_led_state &= ~IDLE_LED;
mistral_setled();
break;
case led_idle_end:
hw_led_state |= IDLE_LED;
mistral_setled();
break;
#endif /* CONFIG_OMAP_OSK_MISTRAL */
default:
break;
}
leds ^= hw_led_state;
done:
local_irq_restore(flags);
}
/*
* linux/arch/arm/mach-omap1/leds.c
*
* OMAP LEDs dispatcher
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <plat/mux.h>
#include "leds.h"
static int __init
omap_leds_init(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
if (machine_is_omap_innovator())
leds_event = innovator_leds_event;
else if (machine_is_omap_h2()
|| machine_is_omap_h3()
|| machine_is_omap_perseus2())
leds_event = h2p2_dbg_leds_event;
else if (machine_is_omap_osk())
leds_event = osk_leds_event;
else
return -1;
if (machine_is_omap_h2()
|| machine_is_omap_h3()
#ifdef CONFIG_OMAP_OSK_MISTRAL
|| machine_is_omap_osk()
#endif
) {
/* LED1/LED2 pins can be used as GPIO (as done here), or by
* the LPG (works even in deep sleep!), to drive a bicolor
* LED on the H2 sample board, and another on the H2/P2
* "surfer" expansion board.
*
* The same pins drive a LED on the OSK Mistral board, but
* that's a different kind of LED (just one color at a time).
*/
omap_cfg_reg(P18_1610_GPIO3);
if (gpio_request(3, "LED red") == 0)
gpio_direction_output(3, 1);
else
printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
omap_cfg_reg(MPUIO4);
if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
gpio_direction_output(OMAP_MPUIO(4), 1);
else
printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
}
leds_event(led_start);
return 0;
}
__initcall(omap_leds_init);
extern void innovator_leds_event(led_event_t evt);
extern void h2p2_dbg_leds_event(led_event_t evt);
extern void osk_leds_event(led_event_t evt);
......@@ -44,7 +44,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
......
......@@ -46,7 +46,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
......
......@@ -41,9 +41,8 @@ config OMAP_DEBUG_DEVICES
For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
bool
def_bool y if NEW_LEDS
depends on OMAP_DEBUG_DEVICES
default y if LEDS_CLASS
config OMAP_SMARTREFLEX
bool "SmartReflex support"
......
/*
* linux/arch/arm/plat-omap/debug-leds.c
*
* Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
* Copyright 2003 by Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
*
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators
* in preference to the ones on the debug board, for a "Disco LED" effect.
*
* This driver exports either the original ARM LED API, the new generic
* one, or both.
*/
static spinlock_t lock;
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 led_state, hw_led_state;
#ifdef CONFIG_OMAP_DEBUG_LEDS
#define new_led_api() 1
#else
#define new_led_api() 0
#endif
/*-------------------------------------------------------------------------*/
/* original ARM debug LED API:
* - timer and idle leds (some boards use non-FPGA leds here);
* - up to 4 generic leds, easily accessed in-kernel (any context)
*/
#define GPIO_LED_RED 3
#define GPIO_LED_GREEN OMAP_MPUIO(4)
#define LED_STATE_ENABLED 0x01
#define LED_STATE_CLAIMED 0x02
#define LED_TIMER_ON 0x04
#define GPIO_IDLE GPIO_LED_GREEN
#define GPIO_TIMER GPIO_LED_RED
static void h2p2_dbg_leds_event(led_event_t evt)
{
unsigned long flags;
spin_lock_irqsave(&lock, flags);
if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
goto done;
switch (evt) {
case led_start:
if (fpga)
led_state |= LED_STATE_ENABLED;
break;
case led_stop:
case led_halted:
/* all leds off during suspend or shutdown */
if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
gpio_set_value(GPIO_TIMER, 0);
gpio_set_value(GPIO_IDLE, 0);
}
__raw_writew(~0, &fpga->leds);
led_state &= ~LED_STATE_ENABLED;
goto done;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
led_state ^= LED_TIMER_ON;
if (machine_is_omap_perseus2() || machine_is_omap_h4())
hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
else {
gpio_set_value(GPIO_TIMER,
led_state & LED_TIMER_ON);
goto done;
}
break;
#endif
#ifdef CONFIG_LEDS_CPU
/* LED lit iff busy */
case led_idle_start:
if (machine_is_omap_perseus2() || machine_is_omap_h4())
hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
else {
gpio_set_value(GPIO_IDLE, 1);
goto done;
}
break;
case led_idle_end:
if (machine_is_omap_perseus2() || machine_is_omap_h4())
hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
else {
gpio_set_value(GPIO_IDLE, 0);
goto done;
}
break;
#endif
case led_green_on:
hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
break;
case led_green_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
break;
case led_amber_on:
hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
break;
case led_amber_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
break;
case led_red_on:
hw_led_state |= H2P2_DBG_FPGA_LED_RED;
break;
case led_red_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
break;
case led_blue_on:
hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
break;
case led_blue_off:
hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
break;
default:
break;
}
/*
* Actually burn the LEDs
*/
if (led_state & LED_STATE_ENABLED)
__raw_writew(~hw_led_state, &fpga->leds);
done:
spin_unlock_irqrestore(&lock, flags);
}
/*-------------------------------------------------------------------------*/
/* "new" LED API
* - with syfs access and generic triggering
* - not readily accessible to in-kernel drivers
*/
static u16 fpga_led_state;
struct dbg_led {
struct led_classdev cdev;
u16 mask;
};
static struct dbg_led dbg_leds[] = {
/* REVISIT at least H2 uses different timer & cpu leds... */
#ifndef CONFIG_LEDS_TIMER
{ .mask = 1 << 0, .cdev.name = "d4:green",
.cdev.default_trigger = "heartbeat", },
#endif
#ifndef CONFIG_LEDS_CPU
{ .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
#endif
{ .mask = 1 << 2, .cdev.name = "d6:green", },
{ .mask = 1 << 3, .cdev.name = "d7:green", },
{ .mask = 1 << 4, .cdev.name = "d8:green", },
{ .mask = 1 << 5, .cdev.name = "d9:green", },
{ .mask = 1 << 6, .cdev.name = "d10:green", },
{ .mask = 1 << 7, .cdev.name = "d11:green", },
{ .mask = 1 << 8, .cdev.name = "d12:green", },
{ .mask = 1 << 9, .cdev.name = "d13:green", },
{ .mask = 1 << 10, .cdev.name = "d14:green", },
{ .mask = 1 << 11, .cdev.name = "d15:green", },
#ifndef CONFIG_LEDS
{ .mask = 1 << 12, .cdev.name = "d16:green", },
{ .mask = 1 << 13, .cdev.name = "d17:green", },
{ .mask = 1 << 14, .cdev.name = "d18:green", },
{ .mask = 1 << 15, .cdev.name = "d19:green", },
#endif
static const struct {
const char *name;
const char *trigger;
} dbg_leds[] = {
{ "dbg:d4", "heartbeat", },
{ "dbg:d5", "cpu0", },
{ "dbg:d6", "default-on", },
{ "dbg:d7", },
{ "dbg:d8", },
{ "dbg:d9", },
{ "dbg:d10", },
{ "dbg:d11", },
{ "dbg:d12", },
{ "dbg:d13", },
{ "dbg:d14", },
{ "dbg:d15", },
{ "dbg:d16", },
{ "dbg:d17", },
{ "dbg:d18", },
{ "dbg:d19", },
};
static void
fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
/*
* The triggers lines up below will only be used if the
* LED triggers are compiled in.
*/
static void dbg_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
unsigned long flags;
u16 reg;
spin_lock_irqsave(&lock, flags);
if (value == LED_OFF)
hw_led_state &= ~led->mask;
reg = __raw_readw(&fpga->leds);
if (b != LED_OFF)
reg |= led->mask;
else
hw_led_state |= led->mask;
__raw_writew(~hw_led_state, &fpga->leds);
spin_unlock_irqrestore(&lock, flags);
reg &= ~led->mask;
__raw_writew(reg, &fpga->leds);
}
static void __init newled_init(struct device *dev)
static enum led_brightness dbg_led_get(struct led_classdev *cdev)
{
unsigned i;
struct dbg_led *led;
int status;
struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
u16 reg;
for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
led->cdev.brightness_set = fpga_led_set;
status = led_classdev_register(dev, &led->cdev);
if (status < 0)
break;
}
return;
reg = __raw_readw(&fpga->leds);
return (reg & led->mask) ? LED_FULL : LED_OFF;
}
/*-------------------------------------------------------------------------*/
static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_probe(struct platform_device *pdev)
{
struct resource *iomem;
spin_lock_init(&lock);
int i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENODEV;
fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
__raw_writew(~0, &fpga->leds);
__raw_writew(0xff, &fpga->leds);
for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
struct dbg_led *led;
#ifdef CONFIG_LEDS
leds_event = h2p2_dbg_leds_event;
leds_event(led_start);
#endif
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (!led)
break;
led->cdev.name = dbg_leds[i].name;
led->cdev.brightness_set = dbg_led_set;
led->cdev.brightness_get = dbg_led_get;
led->cdev.default_trigger = dbg_leds[i].trigger;
led->mask = BIT(i);
if (new_led_api()) {
newled_init(&pdev->dev);
if (led_classdev_register(NULL, &led->cdev) < 0) {
kfree(led);
break;
}
}
return 0;
......@@ -281,13 +120,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_suspend_noirq(struct device *dev)
{
__raw_writew(~0, &fpga->leds);
fpga_led_state = __raw_readw(&fpga->leds);
__raw_writew(0xff, &fpga->leds);
return 0;
}
static int fpga_resume_noirq(struct device *dev)
{
__raw_writew(~hw_led_state, &fpga->leds);
__raw_writew(~fpga_led_state, &fpga->leds);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment