Commit db0b2d01 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD updates from Samuel Ortiz:
 "For the 3.13 merge window we have a couple of new drivers for the AMS
  AS3722 PMIC and for STMicroelectronics STw481x PMIC.

  Although this is a smaller update than usual, we also have:

   - Device tree support for the max77693 driver

   - linux/of.h inclusion for all DT compatible MFD drivers, to avoid
     build breakage in the future

   - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver

   - A small arizona update for new wm5110 DSP registers and a few fixes

   - A small palmas update as well, including an of_device table
     addition and a few minor fixes

   - Two small mfd-core changes, one including a memory leak fix for
     when mfd_add_device() fails

   - Our usual round of minor cleanups and janitorial fixes"

* tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits)
  Documentation: mfd: Update s2mps11.txt
  mfd: pm8921: Potential NULL dereference in pm8921_remove()
  mfd: Fix memory leak in mfd_add_devices()
  mfd: Stop setting refcounting pointers in original mfd_cell arrays
  mfd: wm5110: Enable micd clamp functionality
  mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH
  mfd: max77693: Fix up bug of wrong interrupt number
  mfd: as3722: Don't export the regmap config
  mfd: twl6040: Remove obsolete cleanup for i2c clientdata
  mfd: tps65910: Remove warning during dt node parsing
  mfd: lpc_sch: Ignore resource conflicts when adding mfd cells
  mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock
  mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled
  mfd: Add support for ams AS3722 PMIC
  mfd: max77693: Include linux/of.h header
  mfd: tc3589x: Detect the precise version
  mfd: omap-usb: prepare/unprepare clock while enable/disable
  mfd: max77686: Include linux/of.h header
  mfd: max8907: Include linux/of.h header
  mfd: max8997: Include linux/of.h header
  ...
parents 16cd9d1c 90b128ed
* ams AS3722 Power management IC.
Required properties:
-------------------
- compatible: Must be "ams,as3722".
- reg: I2C device address.
- interrupt-controller: AS3722 has internal interrupt controller which takes the
interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
as external input.
- #interrupt-cells: Should be set to 2 for IRQ number and flags.
The first cell is the IRQ number. IRQ numbers for different interrupt source
of AS3722 are defined at dt-bindings/mfd/as3722.h
The second cell is the flags, encoded as the trigger masks from binding document
interrupts.txt, using dt-bindings/irq.
Optional submodule and their properties:
=======================================
Pinmux and GPIO:
===============
Device has 8 GPIO pins which can be configured as GPIO as well as the special IO
functions.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Following are properties which is needed if GPIO and pinmux functionality
is required:
Required properties:
-------------------
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Number of GPIO cells. Refer to binding document
gpio/gpio.txt
Optional properties:
--------------------
Following properties are require if pin control setting is required
at boot.
- pinctrl-names: A pinctrl state named "default" be defined, using the
bindings in pinctrl/pinctrl-binding.txt.
- pinctrl[0...n]: Properties to contain the phandle that refer to
different nodes of pin control settings. These nodes represents
the pin control setting of state 0 to state n. Each of these
nodes contains different subnodes to represents some desired
configuration for a list of pins. This configuration can
include the mux function to select on those pin(s), and
various pin configuration parameters, such as pull-up,
open drain.
Each subnode have following properties:
Required properties:
- pins: List of pins. Valid values of pins properties are:
gpio0, gpio1, gpio2, gpio3, gpio4, gpio5,
gpio6, gpio7
Optional properties:
function, bias-disable, bias-pull-up, bias-pull-down,
bias-high-impedance, drive-open-drain.
Valid values for function properties are:
gpio, interrupt-out, gpio-in-interrupt,
vsup-vbat-low-undebounce-out,
vsup-vbat-low-debounce-out,
voltage-in-standby, oc-pg-sd0, oc-pg-sd6,
powergood-out, pwm-in, pwm-out, clk32k-out,
watchdog-in, soft-reset-in
Regulators:
===========
Device has multiple DCDC and LDOs. The node "regulators" is require if regulator
functionality is needed.
Following are properties of regulator subnode.
Optional properties:
-------------------
The input supply of regulators are the optional properties on the
regulator node. The input supply of these regulators are provided
through following properties:
vsup-sd2-supply: Input supply for SD2.
vsup-sd3-supply: Input supply for SD3.
vsup-sd4-supply: Input supply for SD4.
vsup-sd5-supply: Input supply for SD5.
vin-ldo0-supply: Input supply for LDO0.
vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
vin-ldo11-supply: Input supply for LDO11.
Optional sub nodes for regulators:
---------------------------------
The subnodes name is the name of regulator and it must be one of:
sd[0-6], ldo[0-7], ldo[9-11]
Each sub-node should contain the constraints and initialization
information for that regulator. See regulator.txt for a description
of standard properties for these sub-nodes.
Additional optional custom properties are listed below.
ams,ext-control: External control of the rail. The option of
this properties will tell which external input is
controlling this rail. Valid values are 0, 1, 2 ad 3.
0: There is no external control of this rail.
1: Rail is controlled by ENABLE1 input pin.
2: Rail is controlled by ENABLE2 input pin.
3: Rail is controlled by ENABLE3 input pin.
Missing this property on DT will be assume as no
external control. The external control pin macros
are defined @dt-bindings/mfd/as3722.h
ams,enable-tracking: Enable tracking with SD1, only supported
by LDO3.
Example:
--------
#include <dt-bindings/mfd/as3722.h>
...
ams3722 {
compatible = "ams,as3722";
reg = <0x48>;
interrupt-parent = <&intc>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
gpio0 {
pins = "gpio0";
function = "gpio";
bias-pull-down;
};
gpio1_2_4_7 {
pins = "gpio1", "gpio2", "gpio4", "gpio7";
function = "gpio";
bias-pull-up;
};
gpio5 {
pins = "gpio5";
function = "clk32k_out";
};
}
regulators {
vsup-sd2-supply = <...>;
...
sd0 {
regulator-name = "vdd_cpu";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
ams,ext-control = <2>;
};
sd1 {
regulator-name = "vdd_core";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
ams,ext-control = <1>;
};
sd2 {
regulator-name = "vddio_ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
sd4 {
regulator-name = "avdd-hdmi-pex";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
};
sd5 {
regulator-name = "vdd-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
....
};
};
* Samsung S2MPS11 Voltage and Current Regulator
The Samsung S2MP211 is a multi-function device which includes voltage and
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
interfaced to the host controller using a I2C interface. Each sub-block is
addressed by the host system using different I2C slave address.
interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
- compatible: Should be "samsung,s2mps11-pmic".
......@@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
regulator-ramp-delay = <0> can be used for them to disable ramp delay.
In absence of regulator-ramp-delay property, default ramp delay will be used.
In the absence of the regulator-ramp-delay property, the default ramp
delay will be used.
NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
......@@ -58,10 +59,10 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
as per the datasheet of s2mps11.
- LDOn
- valid values for n are 1 to 28
- valid values for n are 1 to 38
- Example: LDO0, LD01, LDO28
- BUCKn
- valid values for n are 1 to 9.
- valid values for n are 1 to 10.
- Example: BUCK1, BUCK2, BUCK9
Example:
......
......@@ -1247,7 +1247,7 @@ static struct i2c_driver pm860x_driver = {
.name = "88PM860x",
.owner = THIS_MODULE,
.pm = &pm860x_pm_ops,
.of_match_table = of_match_ptr(pm860x_dt_ids),
.of_match_table = pm860x_dt_ids,
},
.probe = pm860x_probe,
.remove = pm860x_remove,
......
......@@ -27,6 +27,18 @@ config MFD_AS3711
help
Support for the AS3711 PMIC from AMS
config MFD_AS3722
bool "ams AS3722 Power Management IC"
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
depends on I2C && OF
help
The ams AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
controllers, 11 LDOs, RTC, automatic battery, temperature and
over current monitoring, GPIOs, ADC and a watchdog.
config PMIC_ADP5520
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
depends on I2C=y
......@@ -1151,6 +1163,16 @@ config MFD_WM8994
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.
config MFD_STW481X
bool "Support for ST Microelectronics STw481x"
depends on I2C && ARCH_NOMADIK
select REGMAP_I2C
select MFD_CORE
help
Select this option to enable the STw481x chip driver used
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
endmenu
endif
......
......@@ -162,3 +162,5 @@ obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
......@@ -293,7 +293,7 @@ static ssize_t aat2870_reg_write_file(struct file *file,
unsigned long addr, val;
int ret;
buf_size = min(count, (sizeof(buf)-1));
buf_size = min(count, (size_t)(sizeof(buf)-1));
if (copy_from_user(buf, user_buf, buf_size)) {
dev_err(aat2870->dev, "Failed to copy from user\n");
return -EFAULT;
......
......@@ -540,7 +540,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
if (arizona->pdata.gpio_defaults[i] > 0xffff)
arizona->pdata.gpio_defaults[i] = 0;
if (arizona->pdata.gpio_defaults[i] == 0)
else if (arizona->pdata.gpio_defaults[i] == 0)
arizona->pdata.gpio_defaults[i] = 0x10000;
}
} else {
......@@ -633,11 +633,11 @@ int arizona_dev_init(struct arizona *arizona)
dev_set_drvdata(arizona->dev, arizona);
mutex_init(&arizona->clk_lock);
arizona_of_get_core_pdata(arizona);
if (dev_get_platdata(arizona->dev))
memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
sizeof(arizona->pdata));
else
arizona_of_get_core_pdata(arizona);
regcache_cache_only(arizona->regmap, true);
......
......@@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/mfd/arizona/core.h>
......
......@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/of.h>
#include <linux/mfd/arizona/core.h>
......
......@@ -17,6 +17,7 @@
#include <linux/mfd/as3711.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
......
/*
* Core driver for ams AS3722 PMICs
*
* Copyright (C) 2013 AMS AG
* Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
*
* Author: Florian Lobmaier <florian.lobmaier@ams.com>
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/as3722.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define AS3722_DEVICE_ID 0x0C
static const struct resource as3722_rtc_resource[] = {
{
.name = "as3722-rtc-alarm",
.start = AS3722_IRQ_RTC_ALARM,
.end = AS3722_IRQ_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
};
static const struct resource as3722_adc_resource[] = {
{
.name = "as3722-adc",
.start = AS3722_IRQ_ADC,
.end = AS3722_IRQ_ADC,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell as3722_devs[] = {
{
.name = "as3722-pinctrl",
},
{
.name = "as3722-regulator",
},
{
.name = "as3722-rtc",
.num_resources = ARRAY_SIZE(as3722_rtc_resource),
.resources = as3722_rtc_resource,
},
{
.name = "as3722-adc",
.num_resources = ARRAY_SIZE(as3722_adc_resource),
.resources = as3722_adc_resource,
},
{
.name = "as3722-power-off",
},
};
static const struct regmap_irq as3722_irqs[] = {
/* INT1 IRQs */
[AS3722_IRQ_LID] = {
.mask = AS3722_INTERRUPT_MASK1_LID,
},
[AS3722_IRQ_ACOK] = {
.mask = AS3722_INTERRUPT_MASK1_ACOK,
},
[AS3722_IRQ_ENABLE1] = {
.mask = AS3722_INTERRUPT_MASK1_ENABLE1,
},
[AS3722_IRQ_OCCUR_ALARM_SD0] = {
.mask = AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0,
},
[AS3722_IRQ_ONKEY_LONG_PRESS] = {
.mask = AS3722_INTERRUPT_MASK1_ONKEY_LONG,
},
[AS3722_IRQ_ONKEY] = {
.mask = AS3722_INTERRUPT_MASK1_ONKEY,
},
[AS3722_IRQ_OVTMP] = {
.mask = AS3722_INTERRUPT_MASK1_OVTMP,
},
[AS3722_IRQ_LOWBAT] = {
.mask = AS3722_INTERRUPT_MASK1_LOWBAT,
},
/* INT2 IRQs */
[AS3722_IRQ_SD0_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD0_LV,
.reg_offset = 1,
},
[AS3722_IRQ_SD1_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD1_LV,
.reg_offset = 1,
},
[AS3722_IRQ_SD2_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD2345_LV,
.reg_offset = 1,
},
[AS3722_IRQ_PWM1_OV_PROT] = {
.mask = AS3722_INTERRUPT_MASK2_PWM1_OV_PROT,
.reg_offset = 1,
},
[AS3722_IRQ_PWM2_OV_PROT] = {
.mask = AS3722_INTERRUPT_MASK2_PWM2_OV_PROT,
.reg_offset = 1,
},
[AS3722_IRQ_ENABLE2] = {
.mask = AS3722_INTERRUPT_MASK2_ENABLE2,
.reg_offset = 1,
},
[AS3722_IRQ_SD6_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD6_LV,
.reg_offset = 1,
},
[AS3722_IRQ_RTC_REP] = {
.mask = AS3722_INTERRUPT_MASK2_RTC_REP,
.reg_offset = 1,
},
/* INT3 IRQs */
[AS3722_IRQ_RTC_ALARM] = {
.mask = AS3722_INTERRUPT_MASK3_RTC_ALARM,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO1] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO1,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO2] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO2,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO3] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO3,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO4] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO4,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO5] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO5,
.reg_offset = 2,
},
[AS3722_IRQ_WATCHDOG] = {
.mask = AS3722_INTERRUPT_MASK3_WATCHDOG,
.reg_offset = 2,
},
[AS3722_IRQ_ENABLE3] = {
.mask = AS3722_INTERRUPT_MASK3_ENABLE3,
.reg_offset = 2,
},
/* INT4 IRQs */
[AS3722_IRQ_TEMP_SD0_SHUTDOWN] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD1_SHUTDOWN] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD2_SHUTDOWN] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD0_ALARM] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD1_ALARM] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD6_ALARM] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM,
.reg_offset = 3,
},
[AS3722_IRQ_OCCUR_ALARM_SD6] = {
.mask = AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6,
.reg_offset = 3,
},
[AS3722_IRQ_ADC] = {
.mask = AS3722_INTERRUPT_MASK4_ADC,
.reg_offset = 3,
},
};
static const struct regmap_irq_chip as3722_irq_chip = {
.name = "as3722",
.irqs = as3722_irqs,
.num_irqs = ARRAY_SIZE(as3722_irqs),
.num_regs = 4,
.status_base = AS3722_INTERRUPT_STATUS1_REG,
.mask_base = AS3722_INTERRUPT_MASK1_REG,
};
static int as3722_check_device_id(struct as3722 *as3722)
{
u32 val;
int ret;
/* Check that this is actually a AS3722 */
ret = as3722_read(as3722, AS3722_ASIC_ID1_REG, &val);
if (ret < 0) {
dev_err(as3722->dev, "ASIC_ID1 read failed: %d\n", ret);
return ret;
}
if (val != AS3722_DEVICE_ID) {
dev_err(as3722->dev, "Device is not AS3722, ID is 0x%x\n", val);
return -ENODEV;
}
ret = as3722_read(as3722, AS3722_ASIC_ID2_REG, &val);
if (ret < 0) {
dev_err(as3722->dev, "ASIC_ID2 read failed: %d\n", ret);
return ret;
}
dev_info(as3722->dev, "AS3722 with revision 0x%x found\n", val);
return 0;
}
static int as3722_configure_pullups(struct as3722 *as3722)
{
int ret;
u32 val = 0;
if (as3722->en_intern_int_pullup)
val |= AS3722_INT_PULL_UP;
if (as3722->en_intern_i2c_pullup)
val |= AS3722_I2C_PULL_UP;
ret = as3722_update_bits(as3722, AS3722_IOVOLTAGE_REG,
AS3722_INT_PULL_UP | AS3722_I2C_PULL_UP, val);
if (ret < 0)
dev_err(as3722->dev, "IOVOLTAGE_REG update failed: %d\n", ret);
return ret;
}
static const struct regmap_range as3722_readable_ranges[] = {
regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_REG_SEQU_MOD3_REG),
regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
regmap_reg_range(AS3722_RTC_ACCESS_REG, AS3722_RTC_ACCESS_REG),
regmap_reg_range(AS3722_RTC_STATUS_REG, AS3722_TEMP_STATUS_REG),
regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
};
static const struct regmap_access_table as3722_readable_table = {
.yes_ranges = as3722_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(as3722_readable_ranges),
};
static const struct regmap_range as3722_writable_ranges[] = {
regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_GPIO_SIGNAL_OUT_REG),
regmap_reg_range(AS3722_REG_SEQU_MOD1_REG, AS3722_REG_SEQU_MOD3_REG),
regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
regmap_reg_range(AS3722_INTERRUPT_MASK1_REG, AS3722_TEMP_STATUS_REG),
regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC1_CONTROL_REG),
regmap_reg_range(AS3722_ADC1_THRESHOLD_HI_MSB_REG,
AS3722_ADC_CONFIGURATION_REG),
regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
};
static const struct regmap_access_table as3722_writable_table = {
.yes_ranges = as3722_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(as3722_writable_ranges),
};
static const struct regmap_range as3722_cacheable_ranges[] = {
regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_LDO11_VOLTAGE_REG),
regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_LDOCONTROL1_REG),
};
static const struct regmap_access_table as3722_volatile_table = {
.no_ranges = as3722_cacheable_ranges,
.n_no_ranges = ARRAY_SIZE(as3722_cacheable_ranges),
};
static const struct regmap_config as3722_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = AS3722_MAX_REGISTER,
.cache_type = REGCACHE_RBTREE,
.rd_table = &as3722_readable_table,
.wr_table = &as3722_writable_table,
.volatile_table = &as3722_volatile_table,
};
static int as3722_i2c_of_probe(struct i2c_client *i2c,
struct as3722 *as3722)
{
struct device_node *np = i2c->dev.of_node;
struct irq_data *irq_data;
if (!np) {
dev_err(&i2c->dev, "Device Tree not found\n");
return -EINVAL;
}
irq_data = irq_get_irq_data(i2c->irq);
if (!irq_data) {
dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
return -EINVAL;
}
as3722->en_intern_int_pullup = of_property_read_bool(np,
"ams,enable-internal-int-pullup");
as3722->en_intern_i2c_pullup = of_property_read_bool(np,
"ams,enable-internal-i2c-pullup");
as3722->irq_flags = irqd_get_trigger_type(irq_data);
dev_dbg(&i2c->dev, "IRQ flags are 0x%08lx\n", as3722->irq_flags);
return 0;
}
static int as3722_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct as3722 *as3722;
unsigned long irq_flags;
int ret;
as3722 = devm_kzalloc(&i2c->dev, sizeof(struct as3722), GFP_KERNEL);
if (!as3722)
return -ENOMEM;
as3722->dev = &i2c->dev;
as3722->chip_irq = i2c->irq;
i2c_set_clientdata(i2c, as3722);
ret = as3722_i2c_of_probe(i2c, as3722);
if (ret < 0)
return ret;
as3722->regmap = devm_regmap_init_i2c(i2c, &as3722_regmap_config);
if (IS_ERR(as3722->regmap)) {
ret = PTR_ERR(as3722->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
return ret;
}
ret = as3722_check_device_id(as3722);
if (ret < 0)
return ret;
irq_flags = as3722->irq_flags | IRQF_ONESHOT;
ret = regmap_add_irq_chip(as3722->regmap, as3722->chip_irq,
irq_flags, -1, &as3722_irq_chip,
&as3722->irq_data);
if (ret < 0) {
dev_err(as3722->dev, "Failed to add regmap irq: %d\n", ret);
return ret;
}
ret = as3722_configure_pullups(as3722);
if (ret < 0)
goto scrub;
ret = mfd_add_devices(&i2c->dev, -1, as3722_devs,
ARRAY_SIZE(as3722_devs), NULL, 0,
regmap_irq_get_domain(as3722->irq_data));
if (ret) {
dev_err(as3722->dev, "Failed to add MFD devices: %d\n", ret);
goto scrub;
}
dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
return 0;
scrub:
regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
return ret;
}
static int as3722_i2c_remove(struct i2c_client *i2c)
{
struct as3722 *as3722 = i2c_get_clientdata(i2c);
mfd_remove_devices(as3722->dev);
regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
return 0;
}
static const struct of_device_id as3722_of_match[] = {
{ .compatible = "ams,as3722", },
{},
};
MODULE_DEVICE_TABLE(of, as3722_of_match);
static const struct i2c_device_id as3722_i2c_id[] = {
{ "as3722", 0 },
{},
};
MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
static struct i2c_driver as3722_i2c_driver = {
.driver = {
.name = "as3722",
.owner = THIS_MODULE,
.of_match_table = as3722_of_match,
},
.probe = as3722_i2c_probe,
.remove = as3722_i2c_remove,
.id_table = as3722_i2c_id,
};
module_i2c_driver(as3722_i2c_driver);
MODULE_DESCRIPTION("I2C support for AS3722 PMICs");
MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_LICENSE("GPL");
......@@ -86,7 +86,11 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
return 0;
}
static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
/*
* According to errata item 24, multiwrite mode should be avoided
* in order to prevent register data corruption after power-down.
*/
static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
{
int reg_val, ret;
......@@ -94,8 +98,8 @@ static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
if (ret < 0)
return ret;
if (reg_val & DA9052_CONTROL_B_WRITEMODE) {
reg_val &= ~DA9052_CONTROL_B_WRITEMODE;
if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
reg_val |= DA9052_CONTROL_B_WRITEMODE;
ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
reg_val);
if (ret < 0)
......@@ -154,7 +158,7 @@ static int da9052_i2c_probe(struct i2c_client *client,
return ret;
}
ret = da9052_i2c_enable_multiwrite(da9052);
ret = da9052_i2c_disable_multiwrite(da9052);
if (ret < 0)
return ret;
......
......@@ -394,16 +394,12 @@ static int pcap_add_subdev(struct pcap_chip *pcap,
static int ezx_pcap_remove(struct spi_device *spi)
{
struct pcap_chip *pcap = spi_get_drvdata(spi);
struct pcap_platform_data *pdata = dev_get_platdata(&spi->dev);
int i, adc_irq;
int i;
/* remove all registered subdevs */
device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
/* cleanup ADC */
adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
devm_free_irq(&spi->dev, adc_irq, pcap);
mutex_lock(&pcap->adc_mutex);
for (i = 0; i < PCAP_ADC_MAXQ; i++)
kfree(pcap->adc_queue[i]);
......@@ -509,8 +505,6 @@ static int ezx_pcap_probe(struct spi_device *spi)
remove_subdevs:
device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
/* free_adc: */
devm_free_irq(&spi->dev, adc_irq, pcap);
free_irqchip:
for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
irq_set_chip_and_handler(i, NULL, NULL);
......
......@@ -53,6 +53,7 @@
* document number TBD : Wellsburg
* document number TBD : Avoton SoC
* document number TBD : Coleto Creek
* document number TBD : Wildcat Point-LP
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
......@@ -211,6 +212,7 @@ enum lpc_chipsets {
LPC_WBG, /* Wellsburg */
LPC_AVN, /* Avoton SoC */
LPC_COLETO, /* Coleto Creek */
LPC_WPT_LP, /* Wildcat Point-LP */
};
static struct lpc_ich_info lpc_chipset_info[] = {
......@@ -503,6 +505,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
.name = "Coleto Creek",
.iTCO_version = 2,
},
[LPC_WPT_LP] = {
.name = "Lynx Point_LP",
.iTCO_version = 2,
},
};
/*
......@@ -721,6 +727,13 @@ static DEFINE_PCI_DEVICE_TABLE(lpc_ich_ids) = {
{ PCI_VDEVICE(INTEL, 0x1f3a), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x1f3b), LPC_AVN},
{ PCI_VDEVICE(INTEL, 0x2390), LPC_COLETO},
{ PCI_VDEVICE(INTEL, 0x9cc1), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc2), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc3), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc5), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc6), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc7), LPC_WPT_LP},
{ PCI_VDEVICE(INTEL, 0x9cc9), LPC_WPT_LP},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, lpc_ich_ids);
......@@ -969,7 +982,6 @@ static int lpc_ich_probe(struct pci_dev *dev,
if (!cell_added) {
dev_warn(&dev->dev, "No MFD cells added\n");
lpc_ich_restore_config_space(dev);
pci_set_drvdata(dev, NULL);
return -ENODEV;
}
......@@ -980,7 +992,6 @@ static void lpc_ich_remove(struct pci_dev *dev)
{
mfd_remove_devices(&dev->dev);
lpc_ich_restore_config_space(dev);
pci_set_drvdata(dev, NULL);
}
static struct pci_driver lpc_ich_driver = {
......
......@@ -59,18 +59,21 @@ static struct mfd_cell isch_smbus_cell = {
.name = "isch_smbus",
.num_resources = 1,
.resources = &smbus_sch_resource,
.ignore_resource_conflicts = true,
};
static struct mfd_cell sch_gpio_cell = {
.name = "sch_gpio",
.num_resources = 1,
.resources = &gpio_sch_resource,
.ignore_resource_conflicts = true,
};
static struct mfd_cell wdt_sch_cell = {
.name = "ie6xx_wdt",
.num_resources = 1,
.resources = &wdt_sch_resource,
.ignore_resource_conflicts = true,
};
static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = {
......
......@@ -31,6 +31,7 @@
#include <linux/mfd/max77686.h>
#include <linux/mfd/max77686-private.h>
#include <linux/err.h>
#include <linux/of.h>
#define I2C_ADDR_RTC (0x0C >> 1)
......
......@@ -128,7 +128,8 @@ static void max77693_irq_sync_unlock(struct irq_data *data)
static const inline struct max77693_irq_data *
irq_to_max77693_irq(struct max77693_dev *max77693, int irq)
{
return &max77693_irqs[irq];
struct irq_data *data = irq_get_irq_data(irq);
return &max77693_irqs[data->hwirq];
}
static void max77693_irq_mask(struct irq_data *data)
......
......@@ -28,6 +28,7 @@
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
......@@ -110,15 +111,9 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct max77693_dev *max77693;
struct max77693_platform_data *pdata = dev_get_platdata(&i2c->dev);
u8 reg_data;
int ret = 0;
if (!pdata) {
dev_err(&i2c->dev, "No platform data found.\n");
return -EINVAL;
}
max77693 = devm_kzalloc(&i2c->dev,
sizeof(struct max77693_dev), GFP_KERNEL);
if (max77693 == NULL)
......@@ -138,8 +133,6 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
return ret;
}
max77693->wakeup = pdata->wakeup;
ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2,
&reg_data);
if (ret < 0) {
......@@ -179,8 +172,6 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
if (ret < 0)
goto err_mfd;
device_init_wakeup(max77693->dev, pdata->wakeup);
return ret;
err_mfd:
......@@ -235,11 +226,19 @@ static const struct dev_pm_ops max77693_pm = {
.resume = max77693_resume,
};
#ifdef CONFIG_OF
static struct of_device_id max77693_dt_match[] = {
{ .compatible = "maxim,max77693" },
{},
};
#endif
static struct i2c_driver max77693_i2c_driver = {
.driver = {
.name = "max77693",
.owner = THIS_MODULE,
.pm = &max77693_pm,
.of_match_table = of_match_ptr(max77693_dt_match),
},
.probe = max77693_i2c_probe,
.remove = max77693_i2c_remove,
......
......@@ -17,6 +17,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/max8907.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
......
......@@ -238,7 +238,7 @@ static struct i2c_driver max8925_driver = {
.name = "max8925",
.owner = THIS_MODULE,
.pm = &max8925_pm_ops,
.of_match_table = of_match_ptr(max8925_dt_ids),
.of_match_table = max8925_dt_ids,
},
.probe = max8925_probe,
.remove = max8925_remove,
......
......@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
......
......@@ -78,7 +78,6 @@ static int mc13xxx_i2c_probe(struct i2c_client *client,
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
ret);
dev_set_drvdata(&client->dev, NULL);
return ret;
}
......
......@@ -64,7 +64,8 @@ int mfd_cell_disable(struct platform_device *pdev)
EXPORT_SYMBOL(mfd_cell_disable);
static int mfd_platform_add_cell(struct platform_device *pdev,
const struct mfd_cell *cell)
const struct mfd_cell *cell,
atomic_t *usage_count)
{
if (!cell)
return 0;
......@@ -73,11 +74,12 @@ static int mfd_platform_add_cell(struct platform_device *pdev,
if (!pdev->mfd_cell)
return -ENOMEM;
pdev->mfd_cell->usage_count = usage_count;
return 0;
}
static int mfd_add_device(struct device *parent, int id,
const struct mfd_cell *cell,
const struct mfd_cell *cell, atomic_t *usage_count,
struct resource *mem_base,
int irq_base, struct irq_domain *domain)
{
......@@ -123,7 +125,7 @@ static int mfd_add_device(struct device *parent, int id,
goto fail_alias;
}
ret = mfd_platform_add_cell(pdev, cell);
ret = mfd_platform_add_cell(pdev, cell, usage_count);
if (ret)
goto fail_alias;
......@@ -192,12 +194,12 @@ static int mfd_add_device(struct device *parent, int id,
}
int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
const struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
int irq_base, struct irq_domain *domain)
{
int i;
int ret = 0;
int ret;
atomic_t *cnts;
/* initialize reference counting for all cells */
......@@ -207,16 +209,19 @@ int mfd_add_devices(struct device *parent, int id,
for (i = 0; i < n_devs; i++) {
atomic_set(&cnts[i], 0);
cells[i].usage_count = &cnts[i];
ret = mfd_add_device(parent, id, cells + i, mem_base,
ret = mfd_add_device(parent, id, cells + i, cnts + i, mem_base,
irq_base, domain);
if (ret)
break;
goto fail;
}
if (ret)
mfd_remove_devices(parent);
return 0;
fail:
if (i)
mfd_remove_devices(parent);
else
kfree(cnts);
return ret;
}
EXPORT_SYMBOL(mfd_add_devices);
......@@ -271,8 +276,8 @@ int mfd_clone_cell(const char *cell, const char **clones, size_t n_clones)
for (i = 0; i < n_clones; i++) {
cell_entry.name = clones[i];
/* don't give up if a single call fails; just report error */
if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0,
NULL))
if (mfd_add_device(pdev->dev.parent, -1, &cell_entry,
cell_entry.usage_count, NULL, 0, NULL))
dev_err(dev, "failed to create platform device '%s'\n",
clones[i]);
}
......
......@@ -328,13 +328,13 @@ static int usbhs_runtime_resume(struct device *dev)
omap_tll_enable(pdata);
if (!IS_ERR(omap->ehci_logic_fck))
clk_enable(omap->ehci_logic_fck);
clk_prepare_enable(omap->ehci_logic_fck);
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i])) {
r = clk_enable(omap->hsic60m_clk[i]);
r = clk_prepare_enable(omap->hsic60m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic60m clk:%d\n",
......@@ -343,7 +343,7 @@ static int usbhs_runtime_resume(struct device *dev)
}
if (!IS_ERR(omap->hsic480m_clk[i])) {
r = clk_enable(omap->hsic480m_clk[i]);
r = clk_prepare_enable(omap->hsic480m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic480m clk:%d\n",
......@@ -354,7 +354,7 @@ static int usbhs_runtime_resume(struct device *dev)
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i])) {
r = clk_enable(omap->utmi_clk[i]);
r = clk_prepare_enable(omap->utmi_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d clk : %d\n",
......@@ -382,15 +382,15 @@ static int usbhs_runtime_suspend(struct device *dev)
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_disable(omap->hsic60m_clk[i]);
clk_disable_unprepare(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_disable(omap->hsic480m_clk[i]);
clk_disable_unprepare(omap->hsic480m_clk[i]);
/* Fall through as utmi_clks were used in HSIC mode */
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i]))
clk_disable(omap->utmi_clk[i]);
clk_disable_unprepare(omap->utmi_clk[i]);
break;
default:
break;
......@@ -398,7 +398,7 @@ static int usbhs_runtime_suspend(struct device *dev)
}
if (!IS_ERR(omap->ehci_logic_fck))
clk_disable(omap->ehci_logic_fck);
clk_disable_unprepare(omap->ehci_logic_fck);
omap_tll_disable(pdata);
......@@ -893,7 +893,7 @@ static struct platform_driver usbhs_omap_driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
.pm = &usbhsomap_dev_pm_ops,
.of_match_table = of_match_ptr(usbhs_omap_dt_ids),
.of_match_table = usbhs_omap_dt_ids,
},
.remove = usbhs_omap_remove,
};
......
......@@ -320,7 +320,7 @@ static struct platform_driver usbtll_omap_driver = {
.driver = {
.name = (char *)usbtll_driver_name,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(usbtll_omap_dt_ids),
.of_match_table = usbtll_omap_dt_ids,
},
.probe = usbtll_omap_probe,
.remove = usbtll_omap_remove,
......@@ -429,7 +429,7 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
if (IS_ERR(tll->ch_clk[i]))
continue;
r = clk_enable(tll->ch_clk[i]);
r = clk_prepare_enable(tll->ch_clk[i]);
if (r) {
dev_err(tll_dev,
"Error enabling ch %d clock: %d\n", i, r);
......@@ -460,7 +460,7 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
if (!IS_ERR(tll->ch_clk[i]))
clk_disable(tll->ch_clk[i]);
clk_disable_unprepare(tll->ch_clk[i]);
}
}
......
......@@ -368,6 +368,7 @@ static const struct of_device_id of_palmas_match_tbl[] = {
},
{ },
};
MODULE_DEVICE_TABLE(of, of_palmas_match_tbl);
static int palmas_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
......@@ -402,7 +403,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
palmas->dev = &i2c->dev;
palmas->irq = i2c->irq;
match = of_match_device(of_match_ptr(of_palmas_match_tbl), &i2c->dev);
match = of_match_device(of_palmas_match_tbl, &i2c->dev);
if (!match)
return -ENODATA;
......@@ -421,7 +422,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
dev_err(palmas->dev,
"can't attach client %d\n", i);
ret = -ENOMEM;
goto err;
goto err_i2c;
}
palmas->i2c_clients[i]->dev.of_node = of_node_get(node);
}
......@@ -432,7 +433,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
dev_err(palmas->dev,
"Failed to allocate regmap %d, err: %d\n",
i, ret);
goto err;
goto err_i2c;
}
}
......@@ -451,7 +452,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
reg);
if (ret < 0) {
dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret);
goto err;
goto err_i2c;
}
/* Change IRQ into clear on read mode for efficiency */
......@@ -465,7 +466,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
goto err_i2c;
no_irq:
slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE);
......@@ -551,7 +552,6 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
} else if (pdata->pm_off && !pm_power_off) {
palmas_dev = palmas;
pm_power_off = palmas_power_off;
return ret;
}
}
......@@ -559,17 +559,31 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
err_irq:
regmap_del_irq_chip(palmas->irq, palmas->irq_data);
err:
err_i2c:
for (i = 1; i < PALMAS_NUM_CLIENTS; i++) {
if (palmas->i2c_clients[i])
i2c_unregister_device(palmas->i2c_clients[i]);
}
return ret;
}
static int palmas_i2c_remove(struct i2c_client *i2c)
{
struct palmas *palmas = i2c_get_clientdata(i2c);
int i;
mfd_remove_devices(palmas->dev);
regmap_del_irq_chip(palmas->irq, palmas->irq_data);
for (i = 1; i < PALMAS_NUM_CLIENTS; i++) {
if (palmas->i2c_clients[i])
i2c_unregister_device(palmas->i2c_clients[i]);
}
if (palmas == palmas_dev) {
pm_power_off = NULL;
palmas_dev = NULL;
}
return 0;
}
......
......@@ -171,11 +171,12 @@ static int pm8921_remove(struct platform_device *pdev)
drvdata = platform_get_drvdata(pdev);
if (drvdata)
pmic = drvdata->pm_chip_data;
if (pmic)
if (pmic) {
mfd_remove_devices(pmic->dev);
if (pmic->irq_chip) {
pm8xxx_irq_exit(pmic->irq_chip);
pmic->irq_chip = NULL;
if (pmic->irq_chip) {
pm8xxx_irq_exit(pmic->irq_chip);
pmic->irq_chip = NULL;
}
}
return 0;
......
......@@ -130,13 +130,57 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
{
int err;
err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, 0xFE46);
err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
if (err < 0)
return err;
msleep(1);
return rtsx_pci_write_phy_register(pcr, PHY_BPCR, 0x05C0);
err = rtsx_pci_write_phy_register(pcr, PHY_BPCR,
PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
PHY_PCR_RSSI_EN);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 |
PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN |
PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_FLD4,
PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
PHY_FLD4_BER_CHK_EN);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_RCR1,
PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_FLD3,
PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
PHY_FLD3_RXDELINK);
if (err < 0)
return err;
return rtsx_pci_write_phy_register(pcr, PHY_TUNE,
PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
PHY_TUNE_TUNED12);
}
static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
......
......@@ -1149,7 +1149,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
pcr->remap_addr = ioremap_nocache(base, len);
if (!pcr->remap_addr) {
ret = -ENOMEM;
goto free_host;
goto free_handle;
}
pcr->rtsx_resv_buf = dma_alloc_coherent(&(pcidev->dev),
......@@ -1209,8 +1209,6 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
unmap:
iounmap(pcr->remap_addr);
free_host:
dev_set_drvdata(&pcidev->dev, NULL);
free_handle:
kfree(handle);
free_pcr:
......@@ -1242,7 +1240,6 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
pci_disable_msi(pcr->pci);
iounmap(pcr->remap_addr);
dev_set_drvdata(&pcidev->dev, NULL);
pci_release_regions(pcidev);
pci_disable_device(pcidev);
......
......@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
......
......@@ -1232,7 +1232,7 @@ static ssize_t sm501_dbg_regs(struct device *dev,
}
static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL);
/* sm501_init_reg
*
......@@ -1660,7 +1660,6 @@ static int sm501_pci_probe(struct pci_dev *dev,
err3:
pci_disable_device(dev);
err2:
pci_set_drvdata(dev, NULL);
kfree(sm);
err1:
return err;
......@@ -1695,7 +1694,6 @@ static void sm501_pci_remove(struct pci_dev *dev)
release_resource(sm->regs_claim);
kfree(sm->regs_claim);
pci_set_drvdata(dev, NULL);
pci_disable_device(dev);
}
......
/*
* Core driver for STw4810/STw4811
*
* Copyright (C) 2013 ST-Ericsson SA
* Written on behalf of Linaro for ST-Ericsson
*
* Author: Linus Walleij <linus.walleij@linaro.org>
*
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/mfd/stw481x.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
/*
* This driver can only access the non-USB portions of STw4811, the register
* range 0x00-0x10 dealing with USB is bound to the two special I2C pins used
* for USB control.
*/
/* Registers inside the power control address space */
#define STW_PC_VCORE_SEL 0x05U
#define STW_PC_VAUX_SEL 0x06U
#define STW_PC_VPLL_SEL 0x07U
/**
* stw481x_get_pctl_reg() - get a power control register
* @stw481x: handle to the stw481x chip
* @reg: power control register to fetch
*
* The power control registers is a set of one-time-programmable registers
* in its own register space, accessed by writing addess bits to these
* two registers: bits 7,6,5 of PCTL_REG_LO corresponds to the 3 LSBs of
* the address and bits 8,9 of PCTL_REG_HI corresponds to the 2 MSBs of
* the address, forming an address space of 5 bits, i.e. 32 registers
* 0x00 ... 0x1f can be obtained.
*/
static int stw481x_get_pctl_reg(struct stw481x *stw481x, u8 reg)
{
u8 msb = (reg >> 3) & 0x03;
u8 lsb = (reg << 5) & 0xe0;
unsigned int val;
u8 vrfy;
int ret;
ret = regmap_write(stw481x->map, STW_PCTL_REG_HI, msb);
if (ret)
return ret;
ret = regmap_write(stw481x->map, STW_PCTL_REG_LO, lsb);
if (ret)
return ret;
ret = regmap_read(stw481x->map, STW_PCTL_REG_HI, &val);
if (ret)
return ret;
vrfy = (val & 0x03) << 3;
ret = regmap_read(stw481x->map, STW_PCTL_REG_LO, &val);
if (ret)
return ret;
vrfy |= ((val >> 5) & 0x07);
if (vrfy != reg)
return -EIO;
return (val >> 1) & 0x0f;
}
static int stw481x_startup(struct stw481x *stw481x)
{
/* Voltages multiplied by 100 */
u8 vcore_val[] = { 100, 105, 110, 115, 120, 122, 124, 126, 128,
130, 132, 134, 136, 138, 140, 145 };
u8 vpll_val[] = { 105, 120, 130, 180 };
u8 vaux_val[] = { 15, 18, 25, 28 };
u8 vcore;
u8 vcore_slp;
u8 vpll;
u8 vaux;
bool vaux_en;
bool it_warn;
int ret;
unsigned int val;
ret = regmap_read(stw481x->map, STW_CONF1, &val);
if (ret)
return ret;
vaux_en = !!(val & STW_CONF1_PDN_VAUX);
it_warn = !!(val & STW_CONF1_IT_WARN);
dev_info(&stw481x->client->dev, "voltages %s\n",
(val & STW_CONF1_V_MONITORING) ? "OK" : "LOW");
dev_info(&stw481x->client->dev, "MMC level shifter %s\n",
(val & STW_CONF1_MMC_LS_STATUS) ? "high impedance" : "ON");
dev_info(&stw481x->client->dev, "VMMC: %s\n",
(val & STW_CONF1_PDN_VMMC) ? "ON" : "disabled");
dev_info(&stw481x->client->dev, "STw481x power control registers:\n");
ret = stw481x_get_pctl_reg(stw481x, STW_PC_VCORE_SEL);
if (ret < 0)
return ret;
vcore = ret & 0x0f;
ret = stw481x_get_pctl_reg(stw481x, STW_PC_VAUX_SEL);
if (ret < 0)
return ret;
vaux = (ret >> 2) & 3;
vpll = (ret >> 4) & 1; /* Save bit 4 */
ret = stw481x_get_pctl_reg(stw481x, STW_PC_VPLL_SEL);
if (ret < 0)
return ret;
vpll |= (ret >> 1) & 2;
dev_info(&stw481x->client->dev, "VCORE: %u.%uV %s\n",
vcore_val[vcore] / 100, vcore_val[vcore] % 100,
(ret & 4) ? "ON" : "OFF");
dev_info(&stw481x->client->dev, "VPLL: %u.%uV %s\n",
vpll_val[vpll] / 100, vpll_val[vpll] % 100,
(ret & 0x10) ? "ON" : "OFF");
dev_info(&stw481x->client->dev, "VAUX: %u.%uV %s\n",
vaux_val[vaux] / 10, vaux_val[vaux] % 10,
vaux_en ? "ON" : "OFF");
ret = regmap_read(stw481x->map, STW_CONF2, &val);
if (ret)
return ret;
dev_info(&stw481x->client->dev, "TWARN: %s threshold, %s\n",
it_warn ? "below" : "above",
(val & STW_CONF2_MASK_TWARN) ?
"enabled" : "mask through VDDOK");
dev_info(&stw481x->client->dev, "VMMC: %s\n",
(val & STW_CONF2_VMMC_EXT) ? "internal" : "external");
dev_info(&stw481x->client->dev, "IT WAKE UP: %s\n",
(val & STW_CONF2_MASK_IT_WAKE_UP) ? "enabled" : "masked");
dev_info(&stw481x->client->dev, "GPO1: %s\n",
(val & STW_CONF2_GPO1) ? "low" : "high impedance");
dev_info(&stw481x->client->dev, "GPO2: %s\n",
(val & STW_CONF2_GPO2) ? "low" : "high impedance");
ret = regmap_read(stw481x->map, STW_VCORE_SLEEP, &val);
if (ret)
return ret;
vcore_slp = val & 0x0f;
dev_info(&stw481x->client->dev, "VCORE SLEEP: %u.%uV\n",
vcore_val[vcore_slp] / 100, vcore_val[vcore_slp] % 100);
return 0;
}
/*
* MFD cells - we have one cell which is selected operation
* mode, and we always have a GPIO cell.
*/
static struct mfd_cell stw481x_cells[] = {
{
.of_compatible = "st,stw481x-vmmc",
.name = "stw481x-vmmc-regulator",
.id = -1,
},
};
const struct regmap_config stw481x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static int stw481x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct stw481x *stw481x;
int ret;
int i;
stw481x = devm_kzalloc(&client->dev, sizeof(*stw481x), GFP_KERNEL);
if (!stw481x)
return -ENOMEM;
i2c_set_clientdata(client, stw481x);
stw481x->client = client;
stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
ret = stw481x_startup(stw481x);
if (ret) {
dev_err(&client->dev, "chip initialization failed\n");
return ret;
}
/* Set up and register the platform devices. */
for (i = 0; i < ARRAY_SIZE(stw481x_cells); i++) {
/* One state holder for all drivers, this is simple */
stw481x_cells[i].platform_data = stw481x;
stw481x_cells[i].pdata_size = sizeof(*stw481x);
}
ret = mfd_add_devices(&client->dev, 0, stw481x_cells,
ARRAY_SIZE(stw481x_cells), NULL, 0, NULL);
if (ret)
return ret;
dev_info(&client->dev, "initialized STw481x device\n");
return ret;
}
static int stw481x_remove(struct i2c_client *client)
{
mfd_remove_devices(&client->dev);
return 0;
}
/*
* This ID table is completely unused, as this is a pure
* device-tree probed driver, but it has to be here due to
* the structure of the I2C core.
*/
static const struct i2c_device_id stw481x_id[] = {
{ "stw481x", 0 },
{ },
};
static const struct of_device_id stw481x_match[] = {
{ .compatible = "st,stw4810", },
{ .compatible = "st,stw4811", },
{ },
};
MODULE_DEVICE_TABLE(of, stw481x_match);
static struct i2c_driver stw481x_driver = {
.driver = {
.name = "stw481x",
.of_match_table = stw481x_match,
},
.probe = stw481x_probe,
.remove = stw481x_remove,
.id_table = stw481x_id,
};
module_i2c_driver(stw481x_driver);
MODULE_AUTHOR("Linus Walleij");
MODULE_DESCRIPTION("STw481x PMIC driver");
MODULE_LICENSE("GPL v2");
......@@ -16,6 +16,19 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tc3589x.h>
/**
* enum tc3589x_version - indicates the TC3589x version
*/
enum tc3589x_version {
TC3589X_TC35890,
TC3589X_TC35892,
TC3589X_TC35893,
TC3589X_TC35894,
TC3589X_TC35895,
TC3589X_TC35896,
TC3589X_UNKNOWN,
};
#define TC3589x_CLKMODE_MODCTL_SLEEP 0x0
#define TC3589x_CLKMODE_MODCTL_OPERATION (1 << 0)
......@@ -361,7 +374,21 @@ static int tc3589x_probe(struct i2c_client *i2c,
tc3589x->i2c = i2c;
tc3589x->pdata = pdata;
tc3589x->irq_base = pdata->irq_base;
tc3589x->num_gpio = id->driver_data;
switch (id->driver_data) {
case TC3589X_TC35893:
case TC3589X_TC35895:
case TC3589X_TC35896:
tc3589x->num_gpio = 20;
break;
case TC3589X_TC35890:
case TC3589X_TC35892:
case TC3589X_TC35894:
case TC3589X_UNKNOWN:
default:
tc3589x->num_gpio = 24;
break;
}
i2c_set_clientdata(i2c, tc3589x);
......@@ -432,7 +459,13 @@ static int tc3589x_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend, tc3589x_resume);
static const struct i2c_device_id tc3589x_id[] = {
{ "tc3589x", 24 },
{ "tc35890", TC3589X_TC35890 },
{ "tc35892", TC3589X_TC35892 },
{ "tc35893", TC3589X_TC35893 },
{ "tc35894", TC3589X_TC35894 },
{ "tc35895", TC3589X_TC35895 },
{ "tc35896", TC3589X_TC35896 },
{ "tc3589x", TC3589X_UNKNOWN },
{ }
};
MODULE_DEVICE_TABLE(i2c, tc3589x_id);
......
......@@ -445,7 +445,6 @@ static int ti_ssp_remove(struct platform_device *pdev)
iounmap(ssp->regs);
release_mem_region(ssp->res->start, resource_size(ssp->res));
kfree(ssp);
dev_set_drvdata(dev, NULL);
return 0;
}
......
......@@ -56,21 +56,25 @@ EXPORT_SYMBOL_GPL(am335x_tsc_se_update);
void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val)
{
spin_lock(&tsadc->reg_lock);
unsigned long flags;
spin_lock_irqsave(&tsadc->reg_lock, flags);
tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE);
tsadc->reg_se_cache |= val;
am335x_tsc_se_update(tsadc);
spin_unlock(&tsadc->reg_lock);
spin_unlock_irqrestore(&tsadc->reg_lock, flags);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_set);
void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val)
{
spin_lock(&tsadc->reg_lock);
unsigned long flags;
spin_lock_irqsave(&tsadc->reg_lock, flags);
tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE);
tsadc->reg_se_cache &= ~val;
am335x_tsc_se_update(tsadc);
spin_unlock(&tsadc->reg_lock);
spin_unlock_irqrestore(&tsadc->reg_lock, flags);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
......@@ -95,7 +99,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
const __be32 *cur;
u32 val;
int err, ctrl;
int clk_value, clock_rate;
int clock_rate;
int tsc_wires = 0, adc_channels = 0, total_channels;
int readouts = 0;
......@@ -196,11 +200,11 @@ static int ti_tscadc_probe(struct platform_device *pdev)
}
clock_rate = clk_get_rate(clk);
clk_put(clk);
clk_value = clock_rate / ADC_CLK;
tscadc->clk_div = clock_rate / ADC_CLK;
/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
clk_value = clk_value - 1;
tscadc_writel(tscadc, REG_CLKDIV, clk_value);
tscadc->clk_div--;
tscadc_writel(tscadc, REG_CLKDIV, tscadc->clk_div);
/* Set the control register bits */
ctrl = CNTRLREG_STEPCONFIGWRT |
......@@ -303,6 +307,8 @@ static int tscadc_resume(struct device *dev)
tscadc_writel(tscadc_dev, REG_CTRL,
(restore | CNTRLREG_TSCSSENB));
tscadc_writel(tscadc_dev, REG_CLKDIV, tscadc_dev->clk_div);
return 0;
}
......@@ -326,7 +332,7 @@ static struct platform_driver ti_tscadc_driver = {
.name = "ti_am3359-tscadc",
.owner = THIS_MODULE,
.pm = TSCADC_PM_OPS,
.of_match_table = of_match_ptr(ti_tscadc_dt_ids),
.of_match_table = ti_tscadc_dt_ids,
},
.probe = ti_tscadc_probe,
.remove = ti_tscadc_remove,
......
......@@ -678,7 +678,7 @@ static int timb_probe(struct pci_dev *dev,
priv->ctl_mapbase = mapbase + CHIPCTLOFFSET;
if (!request_mem_region(priv->ctl_mapbase, CHIPCTLSIZE, "timb-ctl")) {
dev_err(&dev->dev, "Failed to request ctl mem\n");
goto err_request;
goto err_start;
}
priv->ctl_membase = ioremap(priv->ctl_mapbase, CHIPCTLSIZE);
......@@ -828,13 +828,10 @@ static int timb_probe(struct pci_dev *dev,
iounmap(priv->ctl_membase);
err_ioremap:
release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
err_request:
pci_set_drvdata(dev, NULL);
err_start:
pci_disable_device(dev);
err_enable:
kfree(priv);
pci_set_drvdata(dev, NULL);
return -ENODEV;
}
......@@ -851,7 +848,6 @@ static void timb_remove(struct pci_dev *dev)
pci_disable_msix(dev);
pci_disable_device(dev);
pci_set_drvdata(dev, NULL);
kfree(priv);
}
......
......@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps6507x.h>
......
......@@ -245,7 +245,7 @@ static struct i2c_driver tps65217_driver = {
.driver = {
.name = "tps65217",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(tps65217_of_match),
.of_match_table = tps65217_of_match,
},
.id_table = tps65217_id_table,
.probe = tps65217_probe,
......
......@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/of.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps6586x.h>
......@@ -124,6 +125,7 @@ struct tps6586x {
struct i2c_client *client;
struct regmap *regmap;
int irq;
struct irq_chip irq_chip;
struct mutex irq_lock;
int irq_base;
......@@ -261,12 +263,23 @@ static void tps6586x_irq_sync_unlock(struct irq_data *data)
mutex_unlock(&tps6586x->irq_lock);
}
#ifdef CONFIG_PM_SLEEP
static int tps6586x_irq_set_wake(struct irq_data *irq_data, unsigned int on)
{
struct tps6586x *tps6586x = irq_data_get_irq_chip_data(irq_data);
return irq_set_irq_wake(tps6586x->irq, on);
}
#else
#define tps6586x_irq_set_wake NULL
#endif
static struct irq_chip tps6586x_irq_chip = {
.name = "tps6586x",
.irq_bus_lock = tps6586x_irq_lock,
.irq_bus_sync_unlock = tps6586x_irq_sync_unlock,
.irq_disable = tps6586x_irq_disable,
.irq_enable = tps6586x_irq_enable,
.irq_set_wake = tps6586x_irq_set_wake,
};
static int tps6586x_irq_map(struct irq_domain *h, unsigned int virq,
......@@ -331,6 +344,8 @@ static int tps6586x_irq_init(struct tps6586x *tps6586x, int irq,
int new_irq_base;
int irq_num = ARRAY_SIZE(tps6586x_irqs);
tps6586x->irq = irq;
mutex_init(&tps6586x->irq_lock);
for (i = 0; i < 5; i++) {
tps6586x->mask_reg[i] = 0xff;
......@@ -360,10 +375,8 @@ static int tps6586x_irq_init(struct tps6586x *tps6586x, int irq,
ret = request_threaded_irq(irq, NULL, tps6586x_irq, IRQF_ONESHOT,
"tps6586x", tps6586x);
if (!ret) {
if (!ret)
device_init_wakeup(tps6586x->dev, 1);
enable_irq_wake(irq);
}
return ret;
}
......
......@@ -25,6 +25,7 @@
#include <linux/mfd/core.h>
#include <linux/regmap.h>
#include <linux/mfd/tps65910.h>
#include <linux/of.h>
#include <linux/of_device.h>
static struct resource rtc_resources[] = {
......@@ -410,14 +411,10 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
ret = of_property_read_u32(np, "ti,vmbch-threshold", &prop);
if (!ret)
board_info->vmbch_threshold = prop;
else if (*chip_id == TPS65911)
dev_warn(&client->dev, "VMBCH-Threshold not specified");
ret = of_property_read_u32(np, "ti,vmbch2-threshold", &prop);
if (!ret)
board_info->vmbch2_threshold = prop;
else if (*chip_id == TPS65911)
dev_warn(&client->dev, "VMBCH2-Threshold not specified");
prop = of_property_read_bool(np, "ti,en-ck32k-xtal");
board_info->en_ck32k_xtal = prop;
......
......@@ -565,13 +565,13 @@ static int twl6040_probe(struct i2c_client *client,
twl6040->supplies);
if (ret != 0) {
dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
goto regulator_get_err;
return ret;
}
ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
if (ret != 0) {
dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
goto regulator_get_err;
return ret;
}
twl6040->dev = &client->dev;
......@@ -619,7 +619,7 @@ static int twl6040_probe(struct i2c_client *client,
"twl6040_irq_th", twl6040);
if (ret) {
dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
goto thirq_err;
goto readyirq_err;
}
/* dual-access registers controlled by I2C only */
......@@ -659,21 +659,14 @@ static int twl6040_probe(struct i2c_client *client,
ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
NULL, 0, NULL);
if (ret)
goto mfd_err;
goto readyirq_err;
return 0;
mfd_err:
devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
thirq_err:
devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
readyirq_err:
regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
gpio_err:
regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
regulator_get_err:
i2c_set_clientdata(client, NULL);
return ret;
}
......@@ -684,12 +677,9 @@ static int twl6040_remove(struct i2c_client *client)
if (twl6040->power_count)
twl6040_power(twl6040, 0);
devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
mfd_remove_devices(&client->dev);
i2c_set_clientdata(client, NULL);
regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
......
......@@ -553,6 +553,7 @@ static int ucb1x00_probe(struct mcp *mcp)
if (ucb->irq_base < 0) {
dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
ucb->irq_base);
ret = ucb->irq_base;
goto err_irq_alloc;
}
......
......@@ -903,7 +903,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000D1B, 0xFFFF }, /* R3355 - IRQ2 Status 4 Mask */
{ 0x00000D1C, 0xFFFF }, /* R3356 - IRQ2 Status 5 Mask */
{ 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */
{ 0x00000D50, 0x0000 }, /* R3408 - AOD wkup and trig */
{ 0x00000D53, 0xFFFF }, /* R3411 - AOD IRQ Mask IRQ1 */
{ 0x00000D54, 0xFFFF }, /* R3412 - AOD IRQ Mask IRQ2 */
{ 0x00000D56, 0x0000 }, /* R3414 - Jack detect debounce */
......
......@@ -243,6 +243,12 @@ int wm5110_patch(struct arizona *arizona)
EXPORT_SYMBOL_GPL(wm5110_patch);
static const struct regmap_irq wm5110_aod_irqs[ARIZONA_NUM_IRQ] = {
[ARIZONA_IRQ_MICD_CLAMP_FALL] = {
.mask = ARIZONA_MICD_CLAMP_FALL_EINT1
},
[ARIZONA_IRQ_MICD_CLAMP_RISE] = {
.mask = ARIZONA_MICD_CLAMP_RISE_EINT1
},
[ARIZONA_IRQ_GP5_FALL] = { .mask = ARIZONA_GP5_FALL_EINT1 },
[ARIZONA_IRQ_GP5_RISE] = { .mask = ARIZONA_GP5_RISE_EINT1 },
[ARIZONA_IRQ_JD_FALL] = { .mask = ARIZONA_JD1_FALL_EINT1 },
......@@ -505,6 +511,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
{ 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
{ 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
{ 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */
{ 0x000002A5, 0x0000 }, /* R677 - Mic Detect 3 */
......@@ -592,7 +599,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x0000043E, 0x0080 }, /* R1086 - DAC Volume Limit 6R */
{ 0x0000043F, 0x0800 }, /* R1087 - Noise Gate Select 6R */
{ 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */
{ 0x00000458, 0x0001 }, /* R1112 - Noise Gate Control */
{ 0x00000458, 0x0000 }, /* R1112 - Noise Gate Control */
{ 0x00000480, 0x0040 }, /* R1152 - Class W ANC Threshold 1 */
{ 0x00000481, 0x0040 }, /* R1153 - Class W ANC Threshold 2 */
{ 0x00000490, 0x0069 }, /* R1168 - PDM SPK1 CTRL 1 */
......@@ -1204,7 +1211,6 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000D1B, 0xFFFF }, /* R3355 - IRQ2 Status 4 Mask */
{ 0x00000D1C, 0xFFFF }, /* R3356 - IRQ2 Status 5 Mask */
{ 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */
{ 0x00000D50, 0x0000 }, /* R3408 - AOD wkup and trig */
{ 0x00000D53, 0xFFFF }, /* R3411 - AOD IRQ Mask IRQ1 */
{ 0x00000D54, 0xFFFF }, /* R3412 - AOD IRQ Mask IRQ2 */
{ 0x00000D56, 0x0000 }, /* R3414 - Jack detect debounce */
......@@ -1440,6 +1446,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_MICD_CLAMP_CONTROL:
case ARIZONA_MIC_DETECT_1:
case ARIZONA_MIC_DETECT_2:
case ARIZONA_MIC_DETECT_3:
......@@ -2291,21 +2298,37 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
case ARIZONA_DSP2_CONTROL_1:
case ARIZONA_DSP2_CLOCKING_1:
case ARIZONA_DSP2_STATUS_1:
case ARIZONA_DSP2_STATUS_2:
case ARIZONA_DSP2_STATUS_3:
case ARIZONA_DSP2_SCRATCH_0:
case ARIZONA_DSP2_SCRATCH_1:
case ARIZONA_DSP2_SCRATCH_2:
case ARIZONA_DSP2_SCRATCH_3:
case ARIZONA_DSP3_CONTROL_1:
case ARIZONA_DSP3_CLOCKING_1:
case ARIZONA_DSP3_STATUS_1:
case ARIZONA_DSP3_STATUS_2:
case ARIZONA_DSP3_STATUS_3:
case ARIZONA_DSP3_SCRATCH_0:
case ARIZONA_DSP3_SCRATCH_1:
case ARIZONA_DSP3_SCRATCH_2:
case ARIZONA_DSP3_SCRATCH_3:
case ARIZONA_DSP4_CONTROL_1:
case ARIZONA_DSP4_CLOCKING_1:
case ARIZONA_DSP4_STATUS_1:
case ARIZONA_DSP4_STATUS_2:
case ARIZONA_DSP4_STATUS_3:
case ARIZONA_DSP4_SCRATCH_0:
case ARIZONA_DSP4_SCRATCH_1:
case ARIZONA_DSP4_SCRATCH_2:
case ARIZONA_DSP4_SCRATCH_3:
return true;
default:
return false;
......@@ -2347,25 +2370,41 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_INTERRUPT_RAW_STATUS_7:
case ARIZONA_INTERRUPT_RAW_STATUS_8:
case ARIZONA_IRQ_PIN_STATUS:
case ARIZONA_AOD_WKUP_AND_TRIG:
case ARIZONA_AOD_IRQ1:
case ARIZONA_AOD_IRQ2:
case ARIZONA_AOD_IRQ_RAW_STATUS:
case ARIZONA_FX_CTRL2:
case ARIZONA_ASRC_STATUS:
case ARIZONA_DSP_STATUS:
case ARIZONA_DSP1_CONTROL_1:
case ARIZONA_DSP1_CLOCKING_1:
case ARIZONA_DSP1_STATUS_1:
case ARIZONA_DSP1_STATUS_2:
case ARIZONA_DSP1_STATUS_3:
case ARIZONA_DSP1_SCRATCH_0:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
case ARIZONA_DSP2_STATUS_1:
case ARIZONA_DSP2_STATUS_2:
case ARIZONA_DSP2_STATUS_3:
case ARIZONA_DSP2_SCRATCH_0:
case ARIZONA_DSP2_SCRATCH_1:
case ARIZONA_DSP2_SCRATCH_2:
case ARIZONA_DSP2_SCRATCH_3:
case ARIZONA_DSP3_STATUS_1:
case ARIZONA_DSP3_STATUS_2:
case ARIZONA_DSP3_STATUS_3:
case ARIZONA_DSP3_SCRATCH_0:
case ARIZONA_DSP3_SCRATCH_1:
case ARIZONA_DSP3_SCRATCH_2:
case ARIZONA_DSP3_SCRATCH_3:
case ARIZONA_DSP4_STATUS_1:
case ARIZONA_DSP4_STATUS_2:
case ARIZONA_DSP4_STATUS_3:
case ARIZONA_DSP4_SCRATCH_0:
case ARIZONA_DSP4_SCRATCH_1:
case ARIZONA_DSP4_SCRATCH_2:
case ARIZONA_DSP4_SCRATCH_3:
return true;
default:
return false;
......
......@@ -33,84 +33,6 @@
#include "wm8994.h"
/**
* wm8994_reg_read: Read a single WM8994 register.
*
* @wm8994: Device to read from.
* @reg: Register to read.
*/
int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
{
unsigned int val;
int ret;
ret = regmap_read(wm8994->regmap, reg, &val);
if (ret < 0)
return ret;
else
return val;
}
EXPORT_SYMBOL_GPL(wm8994_reg_read);
/**
* wm8994_bulk_read: Read multiple WM8994 registers
*
* @wm8994: Device to read from
* @reg: First register
* @count: Number of registers
* @buf: Buffer to fill. The data will be returned big endian.
*/
int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
int count, u16 *buf)
{
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
}
/**
* wm8994_reg_write: Write a single WM8994 register.
*
* @wm8994: Device to write to.
* @reg: Register to write to.
* @val: Value to write.
*/
int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
unsigned short val)
{
return regmap_write(wm8994->regmap, reg, val);
}
EXPORT_SYMBOL_GPL(wm8994_reg_write);
/**
* wm8994_bulk_write: Write multiple WM8994 registers
*
* @wm8994: Device to write to
* @reg: First register
* @count: Number of registers
* @buf: Buffer to write from. Data must be big-endian formatted.
*/
int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
int count, const u16 *buf)
{
return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
}
EXPORT_SYMBOL_GPL(wm8994_bulk_write);
/**
* wm8994_set_bits: Set the value of a bitfield in a WM8994 register
*
* @wm8994: Device to write to.
* @reg: Register to write to.
* @mask: Mask of bits to set.
* @val: Value to set (unshifted)
*/
int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
unsigned short mask, unsigned short val)
{
return regmap_update_bits(wm8994->regmap, reg, mask, val);
}
EXPORT_SYMBOL_GPL(wm8994_set_bits);
static struct mfd_cell wm8994_regulator_devs[] = {
{
.name = "wm8994-ldo",
......
/*
* This header provides macros for ams AS3722 device bindings.
*
* Copyright (c) 2013, NVIDIA Corporation.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
*/
#ifndef __DT_BINDINGS_AS3722_H__
#define __DT_BINDINGS_AS3722_H__
/* External control pins */
#define AS3722_EXT_CONTROL_PIN_ENABLE1 1
#define AS3722_EXT_CONTROL_PIN_ENABLE2 2
#define AS3722_EXT_CONTROL_PIN_ENABLE2 3
/* Interrupt numbers for AS3722 */
#define AS3722_IRQ_LID 0
#define AS3722_IRQ_ACOK 1
#define AS3722_IRQ_ENABLE1 2
#define AS3722_IRQ_OCCUR_ALARM_SD0 3
#define AS3722_IRQ_ONKEY_LONG_PRESS 4
#define AS3722_IRQ_ONKEY 5
#define AS3722_IRQ_OVTMP 6
#define AS3722_IRQ_LOWBAT 7
#define AS3722_IRQ_SD0_LV 8
#define AS3722_IRQ_SD1_LV 9
#define AS3722_IRQ_SD2_LV 10
#define AS3722_IRQ_PWM1_OV_PROT 11
#define AS3722_IRQ_PWM2_OV_PROT 12
#define AS3722_IRQ_ENABLE2 13
#define AS3722_IRQ_SD6_LV 14
#define AS3722_IRQ_RTC_REP 15
#define AS3722_IRQ_RTC_ALARM 16
#define AS3722_IRQ_GPIO1 17
#define AS3722_IRQ_GPIO2 18
#define AS3722_IRQ_GPIO3 19
#define AS3722_IRQ_GPIO4 20
#define AS3722_IRQ_GPIO5 21
#define AS3722_IRQ_WATCHDOG 22
#define AS3722_IRQ_ENABLE3 23
#define AS3722_IRQ_TEMP_SD0_SHUTDOWN 24
#define AS3722_IRQ_TEMP_SD1_SHUTDOWN 25
#define AS3722_IRQ_TEMP_SD2_SHUTDOWN 26
#define AS3722_IRQ_TEMP_SD0_ALARM 27
#define AS3722_IRQ_TEMP_SD1_ALARM 28
#define AS3722_IRQ_TEMP_SD6_ALARM 29
#define AS3722_IRQ_OCCUR_ALARM_SD6 30
#define AS3722_IRQ_ADC 31
#endif /* __DT_BINDINGS_AS3722_H__ */
......@@ -1908,7 +1908,7 @@
#define ARIZONA_FLL2_SYNC_GAIN_MASK 0x003c /* FLL2_SYNC_GAIN */
#define ARIZONA_FLL2_SYNC_GAIN_SHIFT 2 /* FLL2_SYNC_GAIN */
#define ARIZONA_FLL2_SYNC_GAIN_WIDTH 4 /* FLL2_SYNC_GAIN */
#define ARIZONA_FLL2_SYNC_BW_MASK 0x0001 /* FLL2_SYNC_BW */
#define ARIZONA_FLL2_SYNC_BW 0x0001 /* FLL2_SYNC_BW */
#define ARIZONA_FLL2_SYNC_BW_MASK 0x0001 /* FLL2_SYNC_BW */
#define ARIZONA_FLL2_SYNC_BW_SHIFT 0 /* FLL2_SYNC_BW */
#define ARIZONA_FLL2_SYNC_BW_WIDTH 1 /* FLL2_SYNC_BW */
......
/*
* as3722 definitions
*
* Copyright (C) 2013 ams
* Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
*
* Author: Florian Lobmaier <florian.lobmaier@ams.com>
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __LINUX_MFD_AS3722_H__
#define __LINUX_MFD_AS3722_H__
#include <linux/regmap.h>
/* AS3722 registers */
#define AS3722_SD0_VOLTAGE_REG 0x00
#define AS3722_SD1_VOLTAGE_REG 0x01
#define AS3722_SD2_VOLTAGE_REG 0x02
#define AS3722_SD3_VOLTAGE_REG 0x03
#define AS3722_SD4_VOLTAGE_REG 0x04
#define AS3722_SD5_VOLTAGE_REG 0x05
#define AS3722_SD6_VOLTAGE_REG 0x06
#define AS3722_GPIO0_CONTROL_REG 0x08
#define AS3722_GPIO1_CONTROL_REG 0x09
#define AS3722_GPIO2_CONTROL_REG 0x0A
#define AS3722_GPIO3_CONTROL_REG 0x0B
#define AS3722_GPIO4_CONTROL_REG 0x0C
#define AS3722_GPIO5_CONTROL_REG 0x0D
#define AS3722_GPIO6_CONTROL_REG 0x0E
#define AS3722_GPIO7_CONTROL_REG 0x0F
#define AS3722_LDO0_VOLTAGE_REG 0x10
#define AS3722_LDO1_VOLTAGE_REG 0x11
#define AS3722_LDO2_VOLTAGE_REG 0x12
#define AS3722_LDO3_VOLTAGE_REG 0x13
#define AS3722_LDO4_VOLTAGE_REG 0x14
#define AS3722_LDO5_VOLTAGE_REG 0x15
#define AS3722_LDO6_VOLTAGE_REG 0x16
#define AS3722_LDO7_VOLTAGE_REG 0x17
#define AS3722_LDO9_VOLTAGE_REG 0x19
#define AS3722_LDO10_VOLTAGE_REG 0x1A
#define AS3722_LDO11_VOLTAGE_REG 0x1B
#define AS3722_GPIO_DEB1_REG 0x1E
#define AS3722_GPIO_DEB2_REG 0x1F
#define AS3722_GPIO_SIGNAL_OUT_REG 0x20
#define AS3722_GPIO_SIGNAL_IN_REG 0x21
#define AS3722_REG_SEQU_MOD1_REG 0x22
#define AS3722_REG_SEQU_MOD2_REG 0x23
#define AS3722_REG_SEQU_MOD3_REG 0x24
#define AS3722_SD_PHSW_CTRL_REG 0x27
#define AS3722_SD_PHSW_STATUS 0x28
#define AS3722_SD0_CONTROL_REG 0x29
#define AS3722_SD1_CONTROL_REG 0x2A
#define AS3722_SDmph_CONTROL_REG 0x2B
#define AS3722_SD23_CONTROL_REG 0x2C
#define AS3722_SD4_CONTROL_REG 0x2D
#define AS3722_SD5_CONTROL_REG 0x2E
#define AS3722_SD6_CONTROL_REG 0x2F
#define AS3722_SD_DVM_REG 0x30
#define AS3722_RESET_REASON_REG 0x31
#define AS3722_BATTERY_VOLTAGE_MONITOR_REG 0x32
#define AS3722_STARTUP_CONTROL_REG 0x33
#define AS3722_RESET_TIMER_REG 0x34
#define AS3722_REFERENCE_CONTROL_REG 0x35
#define AS3722_RESET_CONTROL_REG 0x36
#define AS3722_OVER_TEMP_CONTROL_REG 0x37
#define AS3722_WATCHDOG_CONTROL_REG 0x38
#define AS3722_REG_STANDBY_MOD1_REG 0x39
#define AS3722_REG_STANDBY_MOD2_REG 0x3A
#define AS3722_REG_STANDBY_MOD3_REG 0x3B
#define AS3722_ENABLE_CTRL1_REG 0x3C
#define AS3722_ENABLE_CTRL2_REG 0x3D
#define AS3722_ENABLE_CTRL3_REG 0x3E
#define AS3722_ENABLE_CTRL4_REG 0x3F
#define AS3722_ENABLE_CTRL5_REG 0x40
#define AS3722_PWM_CONTROL_L_REG 0x41
#define AS3722_PWM_CONTROL_H_REG 0x42
#define AS3722_WATCHDOG_TIMER_REG 0x46
#define AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG 0x48
#define AS3722_IOVOLTAGE_REG 0x49
#define AS3722_BATTERY_VOLTAGE_MONITOR2_REG 0x4A
#define AS3722_SD_CONTROL_REG 0x4D
#define AS3722_LDOCONTROL0_REG 0x4E
#define AS3722_LDOCONTROL1_REG 0x4F
#define AS3722_SD0_PROTECT_REG 0x50
#define AS3722_SD6_PROTECT_REG 0x51
#define AS3722_PWM_VCONTROL1_REG 0x52
#define AS3722_PWM_VCONTROL2_REG 0x53
#define AS3722_PWM_VCONTROL3_REG 0x54
#define AS3722_PWM_VCONTROL4_REG 0x55
#define AS3722_BB_CHARGER_REG 0x57
#define AS3722_CTRL_SEQU1_REG 0x58
#define AS3722_CTRL_SEQU2_REG 0x59
#define AS3722_OVCURRENT_REG 0x5A
#define AS3722_OVCURRENT_DEB_REG 0x5B
#define AS3722_SDLV_DEB_REG 0x5C
#define AS3722_OC_PG_CTRL_REG 0x5D
#define AS3722_OC_PG_CTRL2_REG 0x5E
#define AS3722_CTRL_STATUS 0x5F
#define AS3722_RTC_CONTROL_REG 0x60
#define AS3722_RTC_SECOND_REG 0x61
#define AS3722_RTC_MINUTE_REG 0x62
#define AS3722_RTC_HOUR_REG 0x63
#define AS3722_RTC_DAY_REG 0x64
#define AS3722_RTC_MONTH_REG 0x65
#define AS3722_RTC_YEAR_REG 0x66
#define AS3722_RTC_ALARM_SECOND_REG 0x67
#define AS3722_RTC_ALARM_MINUTE_REG 0x68
#define AS3722_RTC_ALARM_HOUR_REG 0x69
#define AS3722_RTC_ALARM_DAY_REG 0x6A
#define AS3722_RTC_ALARM_MONTH_REG 0x6B
#define AS3722_RTC_ALARM_YEAR_REG 0x6C
#define AS3722_SRAM_REG 0x6D
#define AS3722_RTC_ACCESS_REG 0x6F
#define AS3722_RTC_STATUS_REG 0x73
#define AS3722_INTERRUPT_MASK1_REG 0x74
#define AS3722_INTERRUPT_MASK2_REG 0x75
#define AS3722_INTERRUPT_MASK3_REG 0x76
#define AS3722_INTERRUPT_MASK4_REG 0x77
#define AS3722_INTERRUPT_STATUS1_REG 0x78
#define AS3722_INTERRUPT_STATUS2_REG 0x79
#define AS3722_INTERRUPT_STATUS3_REG 0x7A
#define AS3722_INTERRUPT_STATUS4_REG 0x7B
#define AS3722_TEMP_STATUS_REG 0x7D
#define AS3722_ADC0_CONTROL_REG 0x80
#define AS3722_ADC1_CONTROL_REG 0x81
#define AS3722_ADC0_MSB_RESULT_REG 0x82
#define AS3722_ADC0_LSB_RESULT_REG 0x83
#define AS3722_ADC1_MSB_RESULT_REG 0x84
#define AS3722_ADC1_LSB_RESULT_REG 0x85
#define AS3722_ADC1_THRESHOLD_HI_MSB_REG 0x86
#define AS3722_ADC1_THRESHOLD_HI_LSB_REG 0x87
#define AS3722_ADC1_THRESHOLD_LO_MSB_REG 0x88
#define AS3722_ADC1_THRESHOLD_LO_LSB_REG 0x89
#define AS3722_ADC_CONFIGURATION_REG 0x8A
#define AS3722_ASIC_ID1_REG 0x90
#define AS3722_ASIC_ID2_REG 0x91
#define AS3722_LOCK_REG 0x9E
#define AS3722_MAX_REGISTER 0xF4
#define AS3722_SD0_EXT_ENABLE_MASK 0x03
#define AS3722_SD1_EXT_ENABLE_MASK 0x0C
#define AS3722_SD2_EXT_ENABLE_MASK 0x30
#define AS3722_SD3_EXT_ENABLE_MASK 0xC0
#define AS3722_SD4_EXT_ENABLE_MASK 0x03
#define AS3722_SD5_EXT_ENABLE_MASK 0x0C
#define AS3722_SD6_EXT_ENABLE_MASK 0x30
#define AS3722_LDO0_EXT_ENABLE_MASK 0x03
#define AS3722_LDO1_EXT_ENABLE_MASK 0x0C
#define AS3722_LDO2_EXT_ENABLE_MASK 0x30
#define AS3722_LDO3_EXT_ENABLE_MASK 0xC0
#define AS3722_LDO4_EXT_ENABLE_MASK 0x03
#define AS3722_LDO5_EXT_ENABLE_MASK 0x0C
#define AS3722_LDO6_EXT_ENABLE_MASK 0x30
#define AS3722_LDO7_EXT_ENABLE_MASK 0xC0
#define AS3722_LDO9_EXT_ENABLE_MASK 0x0C
#define AS3722_LDO10_EXT_ENABLE_MASK 0x30
#define AS3722_LDO11_EXT_ENABLE_MASK 0xC0
#define AS3722_OVCURRENT_SD0_ALARM_MASK 0x07
#define AS3722_OVCURRENT_SD0_ALARM_SHIFT 0x01
#define AS3722_OVCURRENT_SD0_TRIP_MASK 0x18
#define AS3722_OVCURRENT_SD0_TRIP_SHIFT 0x03
#define AS3722_OVCURRENT_SD1_TRIP_MASK 0x60
#define AS3722_OVCURRENT_SD1_TRIP_SHIFT 0x05
#define AS3722_OVCURRENT_SD6_ALARM_MASK 0x07
#define AS3722_OVCURRENT_SD6_ALARM_SHIFT 0x01
#define AS3722_OVCURRENT_SD6_TRIP_MASK 0x18
#define AS3722_OVCURRENT_SD6_TRIP_SHIFT 0x03
/* AS3722 register bits and bit masks */
#define AS3722_LDO_ILIMIT_MASK BIT(7)
#define AS3722_LDO_ILIMIT_BIT BIT(7)
#define AS3722_LDO0_VSEL_MASK 0x1F
#define AS3722_LDO0_VSEL_MIN 0x01
#define AS3722_LDO0_VSEL_MAX 0x12
#define AS3722_LDO0_NUM_VOLT 0x12
#define AS3722_LDO3_VSEL_MASK 0x3F
#define AS3722_LDO3_VSEL_MIN 0x01
#define AS3722_LDO3_VSEL_MAX 0x2D
#define AS3722_LDO3_NUM_VOLT 0x2D
#define AS3722_LDO_VSEL_MASK 0x7F
#define AS3722_LDO_VSEL_MIN 0x01
#define AS3722_LDO_VSEL_MAX 0x7F
#define AS3722_LDO_VSEL_DNU_MIN 0x25
#define AS3722_LDO_VSEL_DNU_MAX 0x3F
#define AS3722_LDO_NUM_VOLT 0x80
#define AS3722_LDO0_CTRL BIT(0)
#define AS3722_LDO1_CTRL BIT(1)
#define AS3722_LDO2_CTRL BIT(2)
#define AS3722_LDO3_CTRL BIT(3)
#define AS3722_LDO4_CTRL BIT(4)
#define AS3722_LDO5_CTRL BIT(5)
#define AS3722_LDO6_CTRL BIT(6)
#define AS3722_LDO7_CTRL BIT(7)
#define AS3722_LDO9_CTRL BIT(1)
#define AS3722_LDO10_CTRL BIT(2)
#define AS3722_LDO11_CTRL BIT(3)
#define AS3722_LDO3_MODE_MASK (3 << 6)
#define AS3722_LDO3_MODE_VAL(n) (((n) & 0x3) << 6)
#define AS3722_LDO3_MODE_PMOS AS3722_LDO3_MODE_VAL(0)
#define AS3722_LDO3_MODE_PMOS_TRACKING AS3722_LDO3_MODE_VAL(1)
#define AS3722_LDO3_MODE_NMOS AS3722_LDO3_MODE_VAL(2)
#define AS3722_LDO3_MODE_SWITCH AS3722_LDO3_MODE_VAL(3)
#define AS3722_SD_VSEL_MASK 0x7F
#define AS3722_SD0_VSEL_MIN 0x01
#define AS3722_SD0_VSEL_MAX 0x5A
#define AS3722_SD2_VSEL_MIN 0x01
#define AS3722_SD2_VSEL_MAX 0x7F
#define AS3722_SDn_CTRL(n) BIT(n)
#define AS3722_SD0_MODE_FAST BIT(4)
#define AS3722_SD1_MODE_FAST BIT(4)
#define AS3722_SD2_MODE_FAST BIT(2)
#define AS3722_SD3_MODE_FAST BIT(6)
#define AS3722_SD4_MODE_FAST BIT(2)
#define AS3722_SD5_MODE_FAST BIT(2)
#define AS3722_SD6_MODE_FAST BIT(4)
#define AS3722_POWER_OFF BIT(1)
#define AS3722_INTERRUPT_MASK1_LID BIT(0)
#define AS3722_INTERRUPT_MASK1_ACOK BIT(1)
#define AS3722_INTERRUPT_MASK1_ENABLE1 BIT(2)
#define AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0 BIT(3)
#define AS3722_INTERRUPT_MASK1_ONKEY_LONG BIT(4)
#define AS3722_INTERRUPT_MASK1_ONKEY BIT(5)
#define AS3722_INTERRUPT_MASK1_OVTMP BIT(6)
#define AS3722_INTERRUPT_MASK1_LOWBAT BIT(7)
#define AS3722_INTERRUPT_MASK2_SD0_LV BIT(0)
#define AS3722_INTERRUPT_MASK2_SD1_LV BIT(1)
#define AS3722_INTERRUPT_MASK2_SD2345_LV BIT(2)
#define AS3722_INTERRUPT_MASK2_PWM1_OV_PROT BIT(3)
#define AS3722_INTERRUPT_MASK2_PWM2_OV_PROT BIT(4)
#define AS3722_INTERRUPT_MASK2_ENABLE2 BIT(5)
#define AS3722_INTERRUPT_MASK2_SD6_LV BIT(6)
#define AS3722_INTERRUPT_MASK2_RTC_REP BIT(7)
#define AS3722_INTERRUPT_MASK3_RTC_ALARM BIT(0)
#define AS3722_INTERRUPT_MASK3_GPIO1 BIT(1)
#define AS3722_INTERRUPT_MASK3_GPIO2 BIT(2)
#define AS3722_INTERRUPT_MASK3_GPIO3 BIT(3)
#define AS3722_INTERRUPT_MASK3_GPIO4 BIT(4)
#define AS3722_INTERRUPT_MASK3_GPIO5 BIT(5)
#define AS3722_INTERRUPT_MASK3_WATCHDOG BIT(6)
#define AS3722_INTERRUPT_MASK3_ENABLE3 BIT(7)
#define AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN BIT(0)
#define AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN BIT(1)
#define AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN BIT(2)
#define AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM BIT(3)
#define AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM BIT(4)
#define AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM BIT(5)
#define AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6 BIT(6)
#define AS3722_INTERRUPT_MASK4_ADC BIT(7)
#define AS3722_ADC1_INTERVAL_TIME BIT(0)
#define AS3722_ADC1_INT_MODE_ON BIT(1)
#define AS3722_ADC_BUF_ON BIT(2)
#define AS3722_ADC1_LOW_VOLTAGE_RANGE BIT(5)
#define AS3722_ADC1_INTEVAL_SCAN BIT(6)
#define AS3722_ADC1_INT_MASK BIT(7)
#define AS3722_ADC_MSB_VAL_MASK 0x7F
#define AS3722_ADC_LSB_VAL_MASK 0x07
#define AS3722_ADC0_CONV_START BIT(7)
#define AS3722_ADC0_CONV_NOTREADY BIT(7)
#define AS3722_ADC0_SOURCE_SELECT_MASK 0x1F
#define AS3722_ADC1_CONV_START BIT(7)
#define AS3722_ADC1_CONV_NOTREADY BIT(7)
#define AS3722_ADC1_SOURCE_SELECT_MASK 0x1F
/* GPIO modes */
#define AS3722_GPIO_MODE_MASK 0x07
#define AS3722_GPIO_MODE_INPUT 0x00
#define AS3722_GPIO_MODE_OUTPUT_VDDH 0x01
#define AS3722_GPIO_MODE_IO_OPEN_DRAIN 0x02
#define AS3722_GPIO_MODE_ADC_IN 0x03
#define AS3722_GPIO_MODE_INPUT_PULL_UP 0x04
#define AS3722_GPIO_MODE_INPUT_PULL_DOWN 0x05
#define AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP 0x06
#define AS3722_GPIO_MODE_OUTPUT_VDDL 0x07
#define AS3722_GPIO_MODE_VAL(n) ((n) & AS3722_GPIO_MODE_MASK)
#define AS3722_GPIO_INV BIT(7)
#define AS3722_GPIO_IOSF_MASK 0x78
#define AS3722_GPIO_IOSF_VAL(n) (((n) & 0xF) << 3)
#define AS3722_GPIO_IOSF_NORMAL AS3722_GPIO_IOSF_VAL(0)
#define AS3722_GPIO_IOSF_INTERRUPT_OUT AS3722_GPIO_IOSF_VAL(1)
#define AS3722_GPIO_IOSF_VSUP_LOW_OUT AS3722_GPIO_IOSF_VAL(2)
#define AS3722_GPIO_IOSF_GPIO_INTERRUPT_IN AS3722_GPIO_IOSF_VAL(3)
#define AS3722_GPIO_IOSF_ISINK_PWM_IN AS3722_GPIO_IOSF_VAL(4)
#define AS3722_GPIO_IOSF_VOLTAGE_STBY AS3722_GPIO_IOSF_VAL(5)
#define AS3722_GPIO_IOSF_PWR_GOOD_OUT AS3722_GPIO_IOSF_VAL(7)
#define AS3722_GPIO_IOSF_Q32K_OUT AS3722_GPIO_IOSF_VAL(8)
#define AS3722_GPIO_IOSF_WATCHDOG_IN AS3722_GPIO_IOSF_VAL(9)
#define AS3722_GPIO_IOSF_SOFT_RESET_IN AS3722_GPIO_IOSF_VAL(11)
#define AS3722_GPIO_IOSF_PWM_OUT AS3722_GPIO_IOSF_VAL(12)
#define AS3722_GPIO_IOSF_VSUP_LOW_DEB_OUT AS3722_GPIO_IOSF_VAL(13)
#define AS3722_GPIO_IOSF_SD6_LOW_VOLT_LOW AS3722_GPIO_IOSF_VAL(14)
#define AS3722_GPIOn_SIGNAL(n) BIT(n)
#define AS3722_GPIOn_CONTROL_REG(n) (AS3722_GPIO0_CONTROL_REG + n)
#define AS3722_I2C_PULL_UP BIT(4)
#define AS3722_INT_PULL_UP BIT(5)
#define AS3722_RTC_REP_WAKEUP_EN BIT(0)
#define AS3722_RTC_ALARM_WAKEUP_EN BIT(1)
#define AS3722_RTC_ON BIT(2)
#define AS3722_RTC_IRQMODE BIT(3)
#define AS3722_RTC_CLK32K_OUT_EN BIT(5)
#define AS3722_WATCHDOG_TIMER_MAX 0x7F
#define AS3722_WATCHDOG_ON BIT(0)
#define AS3722_WATCHDOG_SW_SIG BIT(0)
#define AS3722_EXT_CONTROL_ENABLE1 0x1
#define AS3722_EXT_CONTROL_ENABLE2 0x2
#define AS3722_EXT_CONTROL_ENABLE3 0x3
/* Interrupt IDs */
enum as3722_irq {
AS3722_IRQ_LID,
AS3722_IRQ_ACOK,
AS3722_IRQ_ENABLE1,
AS3722_IRQ_OCCUR_ALARM_SD0,
AS3722_IRQ_ONKEY_LONG_PRESS,
AS3722_IRQ_ONKEY,
AS3722_IRQ_OVTMP,
AS3722_IRQ_LOWBAT,
AS3722_IRQ_SD0_LV,
AS3722_IRQ_SD1_LV,
AS3722_IRQ_SD2_LV,
AS3722_IRQ_PWM1_OV_PROT,
AS3722_IRQ_PWM2_OV_PROT,
AS3722_IRQ_ENABLE2,
AS3722_IRQ_SD6_LV,
AS3722_IRQ_RTC_REP,
AS3722_IRQ_RTC_ALARM,
AS3722_IRQ_GPIO1,
AS3722_IRQ_GPIO2,
AS3722_IRQ_GPIO3,
AS3722_IRQ_GPIO4,
AS3722_IRQ_GPIO5,
AS3722_IRQ_WATCHDOG,
AS3722_IRQ_ENABLE3,
AS3722_IRQ_TEMP_SD0_SHUTDOWN,
AS3722_IRQ_TEMP_SD1_SHUTDOWN,
AS3722_IRQ_TEMP_SD2_SHUTDOWN,
AS3722_IRQ_TEMP_SD0_ALARM,
AS3722_IRQ_TEMP_SD1_ALARM,
AS3722_IRQ_TEMP_SD6_ALARM,
AS3722_IRQ_OCCUR_ALARM_SD6,
AS3722_IRQ_ADC,
AS3722_IRQ_MAX,
};
struct as3722 {
struct device *dev;
struct regmap *regmap;
int chip_irq;
unsigned long irq_flags;
bool en_intern_int_pullup;
bool en_intern_i2c_pullup;
struct regmap_irq_chip_data *irq_data;
};
static inline int as3722_read(struct as3722 *as3722, u32 reg, u32 *dest)
{
return regmap_read(as3722->regmap, reg, dest);
}
static inline int as3722_write(struct as3722 *as3722, u32 reg, u32 value)
{
return regmap_write(as3722->regmap, reg, value);
}
static inline int as3722_block_read(struct as3722 *as3722, u32 reg,
int count, u8 *buf)
{
return regmap_bulk_read(as3722->regmap, reg, buf, count);
}
static inline int as3722_block_write(struct as3722 *as3722, u32 reg,
int count, u8 *data)
{
return regmap_bulk_write(as3722->regmap, reg, data, count);
}
static inline int as3722_update_bits(struct as3722 *as3722, u32 reg,
u32 mask, u8 val)
{
return regmap_update_bits(as3722->regmap, reg, mask, val);
}
static inline int as3722_irq_get_virq(struct as3722 *as3722, int irq)
{
return regmap_irq_get_virq(as3722->irq_data, irq);
}
#endif /* __LINUX_MFD_AS3722_H__ */
......@@ -104,7 +104,7 @@ static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev)
}
extern int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
const struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
int irq_base, struct irq_domain *irq_domain);
......
......@@ -148,10 +148,15 @@ static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg,
unsigned reg_cnt, unsigned char *val)
{
int ret;
unsigned int tmp;
int i;
ret = regmap_bulk_read(da9052->regmap, reg, val, reg_cnt);
if (ret < 0)
return ret;
for (i = 0; i < reg_cnt; i++) {
ret = regmap_read(da9052->regmap, reg + i, &tmp);
val[i] = (unsigned char)tmp;
if (ret < 0)
return ret;
}
if (da9052->fix_io) {
ret = da9052->fix_io(da9052, reg);
......@@ -166,10 +171,13 @@ static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg,
unsigned reg_cnt, unsigned char *val)
{
int ret;
int i;
ret = regmap_raw_write(da9052->regmap, reg, val, reg_cnt);
if (ret < 0)
return ret;
for (i = 0; i < reg_cnt; i++) {
ret = regmap_write(da9052->regmap, reg + i, val[i]);
if (ret < 0)
return ret;
}
if (da9052->fix_io) {
ret = da9052->fix_io(da9052, reg);
......
......@@ -323,7 +323,6 @@ struct max77693_dev {
int irq;
int irq_gpio;
bool wakeup;
struct mutex irqlock;
int irq_masks_cur[MAX77693_IRQ_GROUP_NR];
int irq_masks_cache[MAX77693_IRQ_GROUP_NR];
......
......@@ -64,8 +64,6 @@ struct max77693_muic_platform_data {
};
struct max77693_platform_data {
int wakeup;
/* regulator data */
struct max77693_regulator_data *regulators;
int num_regulators;
......
......@@ -756,6 +756,59 @@
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
/* Phy bits */
#define PHY_PCR_FORCE_CODE 0xB000
#define PHY_PCR_OOBS_CALI_50 0x0800
#define PHY_PCR_OOBS_VCM_08 0x0200
#define PHY_PCR_OOBS_SEN_90 0x0040
#define PHY_PCR_RSSI_EN 0x0002
#define PHY_RCR1_ADP_TIME 0x0100
#define PHY_RCR1_VCO_COARSE 0x001F
#define PHY_RCR2_EMPHASE_EN 0x8000
#define PHY_RCR2_NADJR 0x4000
#define PHY_RCR2_CDR_CP_10 0x0400
#define PHY_RCR2_CDR_SR_2 0x0100
#define PHY_RCR2_FREQSEL_12 0x0040
#define PHY_RCR2_CPADJEN 0x0020
#define PHY_RCR2_CDR_SC_8 0x0008
#define PHY_RCR2_CALIB_LATE 0x0002
#define PHY_RDR_RXDSEL_1_9 0x4000
#define PHY_TUNE_TUNEREF_1_0 0x4000
#define PHY_TUNE_VBGSEL_1252 0x0C00
#define PHY_TUNE_SDBUS_33 0x0200
#define PHY_TUNE_TUNED18 0x01C0
#define PHY_TUNE_TUNED12 0X0020
#define PHY_BPCR_IBRXSEL 0x0400
#define PHY_BPCR_IBTXSEL 0x0100
#define PHY_BPCR_IB_FILTER 0x0080
#define PHY_BPCR_CMIRROR_EN 0x0040
#define PHY_REG_REV_RESV 0xE000
#define PHY_REG_REV_RXIDLE_LATCHED 0x1000
#define PHY_REG_REV_P1_EN 0x0800
#define PHY_REG_REV_RXIDLE_EN 0x0400
#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 0x0040
#define PHY_REG_REV_STOP_CLKRD 0x0020
#define PHY_REG_REV_RX_PWST 0x0008
#define PHY_REG_REV_STOP_CLKWR 0x0004
#define PHY_FLD3_TIMER_4 0x7800
#define PHY_FLD3_TIMER_6 0x00E0
#define PHY_FLD3_RXDELINK 0x0004
#define PHY_FLD4_FLDEN_SEL 0x4000
#define PHY_FLD4_REQ_REF 0x2000
#define PHY_FLD4_RXAMP_OFF 0x1000
#define PHY_FLD4_REQ_ADDA 0x0800
#define PHY_FLD4_BER_COUNT 0x00E0
#define PHY_FLD4_BER_TIMER 0x000A
#define PHY_FLD4_BER_CHK_EN 0x0001
#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
struct rtsx_pcr;
......
/*
* Copyright (C) 2011 ST-Ericsson SA
* Written on behalf of Linaro for ST-Ericsson
*
* Author: Linus Walleij <linus.walleij@linaro.org>
*
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef MFD_STW481X_H
#define MFD_STW481X_H
#include <linux/i2c.h>
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
#include <linux/bitops.h>
/* These registers are accessed from more than one driver */
#define STW_CONF1 0x11U
#define STW_CONF1_PDN_VMMC 0x01U
#define STW_CONF1_VMMC_MASK 0x0eU
#define STW_CONF1_VMMC_1_8V 0x02U
#define STW_CONF1_VMMC_2_85V 0x04U
#define STW_CONF1_VMMC_3V 0x06U
#define STW_CONF1_VMMC_1_85V 0x08U
#define STW_CONF1_VMMC_2_6V 0x0aU
#define STW_CONF1_VMMC_2_7V 0x0cU
#define STW_CONF1_VMMC_3_3V 0x0eU
#define STW_CONF1_MMC_LS_STATUS 0x10U
#define STW_PCTL_REG_LO 0x1eU
#define STW_PCTL_REG_HI 0x1fU
#define STW_CONF1_V_MONITORING 0x20U
#define STW_CONF1_IT_WARN 0x40U
#define STW_CONF1_PDN_VAUX 0x80U
#define STW_CONF2 0x20U
#define STW_CONF2_MASK_TWARN 0x01U
#define STW_CONF2_VMMC_EXT 0x02U
#define STW_CONF2_MASK_IT_WAKE_UP 0x04U
#define STW_CONF2_GPO1 0x08U
#define STW_CONF2_GPO2 0x10U
#define STW_VCORE_SLEEP 0x21U
/**
* struct stw481x - state holder for the Stw481x drivers
* @mutex: mutex to serialize I2C accesses
* @i2c_client: corresponding I2C client
* @regulator: regulator device for regulator children
* @map: regmap handle to access device registers
*/
struct stw481x {
struct mutex lock;
struct i2c_client *client;
struct regulator_dev *vmmc_regulator;
struct regmap *map;
};
#endif
......@@ -17,10 +17,35 @@
struct device_node;
#ifdef CONFIG_MFD_SYSCON
extern struct regmap *syscon_node_to_regmap(struct device_node *np);
extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s);
extern struct regmap *syscon_regmap_lookup_by_phandle(
struct device_node *np,
const char *property);
#else
static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
{
return ERR_PTR(-ENOSYS);
}
static inline struct regmap *syscon_regmap_lookup_by_compatible(const char *s)
{
return ERR_PTR(-ENOSYS);
}
static inline struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
{
return ERR_PTR(-ENOSYS);
}
static inline struct regmap *syscon_regmap_lookup_by_phandle(
struct device_node *np,
const char *property)
{
return ERR_PTR(-ENOSYS);
}
#endif
#endif /* __LINUX_MFD_SYSCON_H__ */
......@@ -134,13 +134,18 @@
#define FIFO1_THRESHOLD 19
/*
* ADC runs at 3MHz, and it takes
* 15 cycles to latch one data output.
* Hence the idle time for ADC to
* process one sample data would be
* around 5 micro seconds.
*/
#define IDLE_TIMEOUT 5 /* microsec */
* time in us for processing a single channel, calculated as follows:
*
* num cycles = open delay + (sample delay + conv time) * averaging
*
* num cycles: 152 + (1 + 13) * 16 = 376
*
* clock frequency: 26MHz / 8 = 3.25MHz
* clock period: 1 / 3.25MHz = 308ns
*
* processing time: 376 * 308ns = 116us
*/
#define IDLE_TIMEOUT 116 /* microsec */
#define TSCADC_CELLS 2
......@@ -155,6 +160,7 @@ struct ti_tscadc_dev {
struct mfd_cell cells[TSCADC_CELLS];
u32 reg_se_cache;
spinlock_t reg_lock;
unsigned int clk_div;
/* tsc device */
struct titsc *tsc;
......
......@@ -56,8 +56,6 @@ struct irq_domain;
#define WM8994_IRQ_GPIO(x) (x + WM8994_IRQ_TEMP_WARN)
struct wm8994 {
struct mutex irq_lock;
struct wm8994_pdata pdata;
enum wm8994_type type;
......@@ -85,16 +83,43 @@ struct wm8994 {
};
/* Device I/O API */
int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg);
int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
unsigned short val);
int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
unsigned short mask, unsigned short val);
int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
int count, u16 *buf);
int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
int count, const u16 *buf);
static inline int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
{
unsigned int val;
int ret;
ret = regmap_read(wm8994->regmap, reg, &val);
if (ret < 0)
return ret;
else
return val;
}
static inline int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
unsigned short val)
{
return regmap_write(wm8994->regmap, reg, val);
}
static inline int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
int count, u16 *buf)
{
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
}
static inline int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
int count, const u16 *buf)
{
return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
}
static inline int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
unsigned short mask, unsigned short val)
{
return regmap_update_bits(wm8994->regmap, reg, mask, val);
}
/* Helper to save on boilerplate */
static inline int wm8994_request_irq(struct wm8994 *wm8994, int irq,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment