Commit db15d73e authored by Huy Duong's avatar Huy Duong Committed by Greg Kroah-Hartman

eeprom: idt_89hpesx: Support both ACPI and OF probing

Allow the idt_89hpesx driver to get information from child nodes from
both OF and ACPI by using more generic fwnode_property_read*() functions.

Below is an example of instantiating idt_89hpesx driver via ACPI Table:

Device(IDT0) {
 Name(_HID, "PRP0001")
 Name(_CID, "PRP0001")
 Name(_CCA, ONE)
 Name(_STR, Unicode("IDT SW I2C Slave"))
 Name(_CRS, ResourceTemplate () {
  I2cSerialBus (0x74, ControllerInitiated, 1000,
   AddressingMode7Bit, "\\_SB.I2CS",
   0x00, ResourceConsumer, ,
  )
 })
 Name (_DSD, Package () {
  ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
  Package () {
   Package () {"compatible", "idt,89hpes32nt8ag2"},
  },
 })
 Device (EPR0) {
  Name (_DSD, Package () {
   ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
   Package () {
    Package () {"compatible", "onsemi,24c64"},
    Package () {"reg", 0x50},
   }
  })
 }
}
Signed-off-by: default avatarHuy Duong <qhuyduong@hotmail.com>
Acked-by: default avatarSerge Semin <fancer.lancer@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5ec6bff1
......@@ -77,7 +77,7 @@
#include <linux/sysfs.h>
#include <linux/debugfs.h>
#include <linux/mod_devicetable.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/i2c.h>
#include <linux/pci_ids.h>
#include <linux/delay.h>
......@@ -1089,20 +1089,24 @@ static void idt_set_defval(struct idt_89hpesx_dev *pdev)
pdev->eeaddr = 0;
}
#ifdef CONFIG_OF
static const struct i2c_device_id ee_ids[];
/*
* idt_ee_match_id() - check whether the node belongs to compatible EEPROMs
*/
static const struct i2c_device_id *idt_ee_match_id(struct device_node *node)
static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode)
{
const struct i2c_device_id *id = ee_ids;
const char *compatible, *p;
char devname[I2C_NAME_SIZE];
int ret;
/* Retrieve the device name without manufacturer name */
if (of_modalias_node(node, devname, sizeof(devname)))
ret = fwnode_property_read_string(fwnode, "compatible", &compatible);
if (ret)
return NULL;
p = strchr(compatible, ',');
strlcpy(devname, p ? p + 1 : compatible, sizeof(devname));
/* Search through the device name */
while (id->name[0]) {
if (strcmp(devname, id->name) == 0)
......@@ -1113,34 +1117,29 @@ static const struct i2c_device_id *idt_ee_match_id(struct device_node *node)
}
/*
* idt_get_ofdata() - get IDT i2c-device parameters from device tree
* idt_get_fw_data() - get IDT i2c-device parameters from device tree
* @pdev: Pointer to the driver data
*/
static void idt_get_ofdata(struct idt_89hpesx_dev *pdev)
static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
{
const struct device_node *node = pdev->client->dev.of_node;
struct device *dev = &pdev->client->dev;
/* Read dts node parameters */
if (node) {
struct fwnode_handle *fwnode;
const struct i2c_device_id *ee_id = NULL;
struct device_node *child;
const __be32 *addr_be;
int len;
u32 eeprom_addr;
int ret;
/* Walk through all child nodes looking for compatible one */
for_each_available_child_of_node(node, child) {
ee_id = idt_ee_match_id(child);
device_for_each_child_node(dev, fwnode) {
ee_id = idt_ee_match_id(fwnode);
if (IS_ERR_OR_NULL(ee_id)) {
dev_warn(dev, "Skip unsupported child node %pOF",
child);
dev_warn(dev, "Skip unsupported EEPROM device");
continue;
} else
break;
}
/* If there is no child EEPROM device, then set zero size */
/* If there is no fwnode EEPROM device, then set zero size */
if (!ee_id) {
dev_warn(dev, "No fwnode, EEPROM access disabled");
idt_set_defval(pdev);
return;
}
......@@ -1149,41 +1148,26 @@ static void idt_get_ofdata(struct idt_89hpesx_dev *pdev)
pdev->eesize = (u32)ee_id->driver_data;
/* Get custom EEPROM address from 'reg' attribute */
addr_be = of_get_property(child, "reg", &len);
if (!addr_be || (len < sizeof(*addr_be))) {
dev_warn(dev, "No reg on %pOF, use default address %d",
child, EEPROM_DEF_ADDR);
ret = fwnode_property_read_u32(fwnode, "reg", &eeprom_addr);
if (ret || (eeprom_addr == 0)) {
dev_warn(dev, "No EEPROM reg found, use default address 0x%x",
EEPROM_DEF_ADDR);
pdev->inieecmd = 0;
pdev->eeaddr = EEPROM_DEF_ADDR << 1;
} else {
pdev->inieecmd = EEPROM_USA;
pdev->eeaddr = be32_to_cpup(addr_be) << 1;
pdev->eeaddr = eeprom_addr << 1;
}
/* Check EEPROM 'read-only' flag */
if (of_get_property(child, "read-only", NULL))
if (fwnode_property_read_bool(fwnode, "read-only"))
pdev->eero = true;
else /* if (!of_get_property(node, "read-only", NULL)) */
else /* if (!fwnode_property_read_bool(node, "read-only")) */
pdev->eero = false;
dev_dbg(dev, "EEPROM of %u bytes found by %hhu",
dev_info(dev, "EEPROM of %d bytes found by 0x%x",
pdev->eesize, pdev->eeaddr);
} else {
dev_warn(dev, "No dts node, EEPROM access disabled");
idt_set_defval(pdev);
}
}
#else
static void idt_get_ofdata(struct idt_89hpesx_dev *pdev)
{
struct device *dev = &pdev->client->dev;
dev_warn(dev, "OF table is unsupported, EEPROM access disabled");
/* Nothing we can do, just set the default values */
idt_set_defval(pdev);
}
#endif /* CONFIG_OF */
/*
* idt_create_pdev() - create and init data structure of the driver
......@@ -1203,8 +1187,8 @@ static struct idt_89hpesx_dev *idt_create_pdev(struct i2c_client *client)
pdev->client = client;
i2c_set_clientdata(client, pdev);
/* Read OF nodes information */
idt_get_ofdata(pdev);
/* Read firmware nodes information */
idt_get_fw_data(pdev);
/* Initialize basic CSR CMD field - use full DWORD-sized r/w ops */
pdev->inicsrcmd = CSR_DWE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment