Merge tag 'sunxi-dt-for-5.4-1' of...

Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT changes for 5.4

Our usual pile of patches for the next release, which include mostly:
  - More fixes thanks to the DT validation using the YAML bindings
  - IR receiver support on the H6
  - SPDIF support on the H6
  - I2C Support on the H6
  - CSI support on the A20
  - RTC support on the H6
  - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC

* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
  arm64: dts: allwinner: orange-pi-3: Enable WiFi
  ARM: dts: sunxi: Add missing watchdog clocks
  ARM: dts: sunxi: Add missing watchdog interrupts
  arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
  ARM: dts: sun7i: Add CSI0 controller
  arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
  dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
  ARM: dts: v3s: Change the timers compatible
  ARM: dts: h3: Change the timers compatible
  ARM: dts: a83t: Change the timers compatible
  ARM: dts: a23/a33: Change the timers compatible
  ARM: dts: sun6i: Add missing timers interrupts
  ARM: dts: sun5i: Add missing timers interrupts
  ARM: dts: sun4i: Add missing timers interrupts
  dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
  arm64: dts: allwinner: h6: Introduce Tanix TX6 board
  dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
  arm64: allwinner: h6: add I2C nodes
  dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
  ARM: dts: sunxi: Add mdio bus sub-node to GMAC
  ...

Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -353,6 +353,12 @@ properties:
           - const: licheepi,licheepi-zero
           - const: allwinner,sun8i-v3s
 
+      - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash)
+        items:
+          - const: sipeed,lichee-zero-plus
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
       - description: Linksprite PCDuino
         items:
           - const: linksprite,a10-pcduino
@@ -568,6 +574,11 @@ properties:
           - const: olimex,a64-olinuxino
           - const: allwinner,sun50i-a64
 
+      - description: Olimex A64-OlinuXino (with eMMC)
+        items:
+          - const: olimex,a64-olinuxino-emmc
+          - const: allwinner,sun50i-a64
+
       - description: Olimex A64 Teres-I
         items:
           - const: olimex,a64-teres-i
@@ -671,6 +682,11 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: Tanix TX6
+        items:
+          - const: oranth,tanix-tx6
+          - const: allwinner,sun50i-h6
+
       - description: TBS A711 Tablet
         items:
           - const: tbs-biometrics,a711

Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml

@@ -26,6 +26,9 @@ properties:
       - items:
           - const: allwinner,sun50i-a64-i2c
           - const: allwinner,sun6i-a31-i2c
+      - items:
+          - const: allwinner,sun50i-h6-i2c
+          - const: allwinner,sun6i-a31-i2c
 
       - const: marvell,mv64xxx-i2c
       - const: marvell,mv78230-i2c

Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A33 Thermal Sensor Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#io-channel-cells":
+    const: 0
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun8i-a33-ths
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#io-channel-cells"
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ths: ths@1c25000 {
+        compatible = "allwinner,sun8i-a33-ths";
+        reg = <0x01c25000 0x100>;
+        #thermal-sensor-cells = <0>;
+        #io-channel-cells = <0>;
+    };
+
+...

Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#thermal-sensor-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ts
+      - allwinner,sun5i-a13-ts
+      - allwinner,sun6i-a31-ts
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  allwinner,ts-attached:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: A touchscreen is attached to the controller
+
+  allwinner,tp-sensitive-adjust:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+        maximum: 15
+        default: 15
+    description: Sensitivity of pen down detection
+
+  allwinner,filter-type:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+        maximum: 3
+        default: 1
+    description: |
+      Select median and averaging filter. Sample used for median /
+      averaging filter:
+        0: 4/2
+        1: 5/3
+        2: 8/4
+        3: 16/8
+
+required:
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    rtp: rtp@1c25000 {
+        compatible = "allwinner,sun4i-a10-ts";
+        reg = <0x01c25000 0x100>;
+        interrupts = <29>;
+        allwinner,ts-attached;
+        #thermal-sensor-cells = <0>;
+        /* sensitive/noisy touch panel */
+        allwinner,tp-sensitive-adjust = <0>;
+        allwinner,filter-type = <3>;
+    };
+
+...

Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt

-Allwinner SoCs' GPADC Device Tree bindings
-------------------------------------------
-The Allwinner SoCs all have an ADC that can also act as a thermal sensor
-and sometimes as a touchscreen controller.
-
-Required properties:
-  - compatible: "allwinner,sun8i-a33-ths",
-  - reg: mmio address range of the chip,
-  - #thermal-sensor-cells: shall be 0,
-  - #io-channel-cells: shall be 0,
-
-Example:
-	ths: ths@1c25000 {
-		compatible = "allwinner,sun8i-a33-ths";
-		reg = <0x01c25000 0x100>;
-		#thermal-sensor-cells = <0>;
-		#io-channel-cells = <0>;
-	};
-
-sun4i, sun5i and sun6i SoCs are also supported via the older binding:
-
-sun4i resistive touchscreen controller
---------------------------------------
-
-Required properties:
- - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
-   "allwinner,sun6i-a31-ts"
- - reg: mmio address range of the chip
- - interrupts: interrupt to which the chip is connected
- - #thermal-sensor-cells: shall be 0
-
-Optional properties:
- - allwinner,ts-attached	 : boolean indicating that an actual touchscreen
-				   is attached to the controller
- - allwinner,tp-sensitive-adjust : integer (4 bits)
-				   adjust sensitivity of pen down detection
-				   between 0 (least sensitive) and 15
-				   (defaults to 15)
- - allwinner,filter-type	 : integer (2 bits)
-				   select median and averaging filter
-				   samples used for median / averaging filter
-				   0: 4/2
-				   1: 5/3
-				   2: 8/4
-				   3: 16/8
-				   (defaults to 1)
-
-Example:
-
-	rtp: rtp@1c25000 {
-		compatible = "allwinner,sun4i-a10-ts";
-		reg = <0x01c25000 0x100>;
-		interrupts = <29>;
-		allwinner,ts-attached;
-		#thermal-sensor-cells = <0>;
-		/* sensitive/noisy touch panel */
-		allwinner,tp-sensitive-adjust = <0>;
-		allwinner,filter-type = <3>;
-	};

arch/arm/boot/dts/Makefile

@@ -1117,6 +1117,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -125,7 +125,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts

@@ -68,7 +68,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -114,7 +114,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -80,7 +80,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy0>;
+	phy-handle = <&phy0>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts

@@ -58,7 +58,7 @@ &ahci {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts

@@ -94,7 +94,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -105,7 +105,7 @@ &emac_sram {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -112,7 +112,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -110,7 +110,7 @@ &ehci1 {
 };
 
 &emac {
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -803,13 +803,20 @@ uart1_pins: uart1-pins {
 		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
 			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
 		};
 
 		rtc: rtc@1c20d00 {

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -98,7 +98,7 @@ &ehci0 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_pa_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts

@@ -91,7 +91,7 @@ &ehci0 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_pd_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 

arch/arm/boot/dts/sun5i-a13-q8-tablet.dts

@@ -49,7 +49,7 @@ / {
 	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
 
 	panel: panel {
-		compatible = "bananapi,s070wv20-ct16", "simple-panel";
+		compatible = "bananapi,s070wv20-ct16";
 		power-supply = <&reg_vcc3v3>;
 		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
 		backlight = <&backlight>;

arch/arm/boot/dts/sun5i.dtsi

@@ -588,13 +588,20 @@ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
 		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
 			clocks = <&ccu CLK_HOSC>;
 		};
 
 		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
 		};
 
 		ir0: ir@1c21800 {

arch/arm/boot/dts/sun6i-a31-colombus.dts

@@ -76,13 +76,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -104,6 +100,12 @@ mma8452: mma8452@1d {
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -153,16 +153,9 @@ &ehci0 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
-	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -199,6 +192,15 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-i7.dts

@@ -117,13 +117,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -142,6 +138,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-m9.dts

@@ -84,14 +84,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -100,6 +96,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts

@@ -84,14 +84,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -100,6 +96,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -736,13 +736,16 @@ timer@1c20c00 {
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};
 
 		wdt1: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		spdif: spdif@1c21000 {
@@ -939,9 +942,13 @@ gmac: ethernet@1c30000 {
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+		};
 
 		crypto: crypto-engine@1c15000 {
 			compatible = "allwinner,sun6i-a31-crypto",
@@ -1364,7 +1371,7 @@ cpucfg@1f01c00 {
 		};
 
 		ir: ir@1f02000 {
-			compatible = "allwinner,sun5i-a13-ir";
+			compatible = "allwinner,sun6i-a31-ir";
 			clocks = <&apb0_gates 1>, <&ir_clk>;
 			clock-names = "apb", "ir";
 			resets = <&apb0_rst 1>;

arch/arm/boot/dts/sun6i-a31s-cs908.dts

@@ -67,12 +67,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -81,6 +78,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci1 {
 	status = "okay";
 };

arch/arm/boot/dts/sun6i-a31s-sina31s.dts

@@ -115,14 +115,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -160,6 +156,12 @@ button-349 {
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -92,17 +92,10 @@ &ehci0 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_dldo1>;
-	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -111,6 +104,15 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts

@@ -129,14 +129,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -171,6 +167,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -131,14 +131,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -171,6 +167,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-bananapro.dts

@@ -109,14 +109,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -143,6 +139,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -115,13 +115,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -161,6 +157,12 @@ &mmc0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -150,13 +150,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -194,6 +190,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -100,19 +100,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_vdd>;
-	/* phy reset config */
-	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-	snps,reset-active-low;
-	/* wait 1s after reset, otherwise fail to read phy id */
-	snps,reset-delays-us = <0 10000 1000000>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -146,6 +137,16 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

@@ -115,14 +115,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -145,6 +141,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-icnova-swac.dts

@@ -76,13 +76,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -99,6 +95,12 @@ &i2c1 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-itead-ibox.dts

@@ -97,10 +97,12 @@ &codec {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
+&gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -123,8 +123,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-	/delete-property/#address-cells;
-	/delete-property/#size-cells;
 
 	fixed-link {
 		speed = <1000>;

arch/arm/boot/dts/sun7i-a20-m3.dts

@@ -82,13 +82,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -111,6 +107,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts

@@ -111,13 +111,9 @@ &codec {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -202,6 +198,12 @@ button-1400 {
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts

@@ -105,18 +105,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy3>;
+	phy-handle = <&phy3>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_vcc3v3>;
-
-	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
 	status = "okay";
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
 };
 
 &hdmi {
@@ -161,6 +153,16 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

@@ -106,13 +106,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -149,6 +145,12 @@ eeprom: eeprom@50 {
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -111,13 +111,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -154,6 +150,12 @@ &lradc {
 	vref-supply = <&reg_vcc3v0>;
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -118,13 +118,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -215,6 +211,12 @@ button-1398 {
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts

@@ -120,14 +120,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -158,6 +154,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-orangepi.dts

@@ -96,14 +96,10 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -124,6 +120,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts

@@ -114,13 +114,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -149,6 +145,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -122,13 +122,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_mii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -149,6 +145,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts

@@ -81,13 +81,9 @@ &ehci1 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -110,6 +106,12 @@ &i2c2 {
 
 #include "axp209.dtsi"
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -376,6 +376,17 @@ spi1: spi@1c06000 {
 			num-cs = <1>;
 		};
 
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
+				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "mod", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+			status = "disabled";
+		};
+
 		emac: ethernet@1c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -774,6 +785,20 @@ clk_out_b_pin: clk-out-b-pin {
 				function = "clk_out_b";
 			};
 
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_clk_pin: csi-clk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
 			/omit-if-no-ref/
 			emac_pa_pins: emac-pa-pins {
 				pins = "PA0", "PA1", "PA2",
@@ -1115,6 +1140,8 @@ timer@1c20c00 {
 		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		rtc: rtc@1c20d00 {
@@ -1437,9 +1464,13 @@ gmac: ethernet@1c50000 {
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+		};
 
 		hstimer@1c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -441,7 +441,7 @@ uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
 		};
 
 		timer@1c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
+			compatible = "allwinner,sun8i-a23-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -452,6 +452,7 @@ wdt0: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		pwm: pwm@1c21400 {

arch/arm/boot/dts/sun8i-a23-q8-tablet.dts

@@ -63,7 +63,7 @@ &codec {
 };
 
 &panel {
-	compatible = "bananapi,s070wv20-ct16", "simple-panel";
+	compatible = "bananapi,s070wv20-ct16";
 };
 
 &tcon0_out {

arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts

@@ -60,6 +60,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -153,6 +164,10 @@ &cpu100 {
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	/* GL830 USB-to-SATA bridge here */
 	status = "okay";
@@ -172,6 +187,16 @@ &emac {
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -314,10 +314,10 @@ soc {
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-a83t-de2-clk";
 			reg = <0x01000000 0x100000>;
-			clocks = <&ccu CLK_PLL_DE>,
-				 <&ccu CLK_BUS_DE>;
-			clock-names = "mod",
-				      "bus";
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_PLL_DE>;
+			clock-names = "bus",
+				      "mod";
 			resets = <&ccu RST_BUS_DE>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -806,7 +806,7 @@ uart2_pb_pins: uart2-pb-pins {
 		};
 
 		timer@1c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
+			compatible = "allwinner,sun8i-a23-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1037,7 +1037,7 @@ hdmi: hdmi@1ee0000 {
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+			phy-names = "phy";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdmi_pins>;
 			status = "disabled";
@@ -1096,7 +1096,7 @@ r_cpucfg@1f01c00 {
 
 		r_cir: ir@1f02000 {
 			compatible = "allwinner,sun8i-a83t-ir",
-				"allwinner,sun5i-a13-ir";
+				"allwinner,sun6i-a31-ir";
 			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
 			clock-names = "apb", "ir";
 			resets = <&r_ccu RST_APB0_IR>;

arch/arm/boot/dts/sun8i-r40.dtsi

@@ -119,10 +119,10 @@ display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-r40-de2-clk",
 				     "allwinner,sun8i-h3-de2-clk";
 			reg = <0x01000000 0x100000>;
-			clocks = <&ccu CLK_DE>,
-				 <&ccu CLK_BUS_DE>;
-			clock-names = "mod",
-				      "bus";
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
 			resets = <&ccu RST_BUS_DE>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -404,6 +404,8 @@ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
 		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		uart0: serial@1c28000 {
@@ -808,7 +810,7 @@ hdmi: hdmi@1ee0000 {
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+			phy-names = "phy";
 			status = "disabled";
 
 			ports {

arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sipeed Lichee Zero Plus";
+	compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};

arch/arm/boot/dts/sun8i-v3.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+};

arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -106,10 +106,10 @@ soc {
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-v3s-de2-clk";
 			reg = <0x01000000 0x100000>;
-			clocks = <&ccu CLK_DE>,
-				 <&ccu CLK_BUS_DE>;
-			clock-names = "mod",
-				      "bus";
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
 			resets = <&ccu RST_BUS_DE>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -327,10 +327,11 @@ spi0_pins: spi0-pins {
 		};
 
 		timer@1c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
+			compatible = "allwinner,sun8i-v3s-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};
 
@@ -338,6 +339,7 @@ wdt0: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		lradc: lradc@1c22800 {

arch/arm/boot/dts/sun9i-a80-cubieboard4.dts

@@ -128,14 +128,10 @@ &de {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c3 {
@@ -144,6 +140,12 @@ &i2c3 {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -123,11 +123,13 @@ &ehci2 {
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
+};
 
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -331,9 +331,13 @@ gmac: ethernet@830000 {
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+		};
 
 		ehci0: usb@a00000 {
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
@@ -1167,7 +1171,7 @@ nmi_intc: interrupt-controller@80015a0 {
 		};
 
 		r_ir: ir@8002000 {
-			compatible = "allwinner,sun5i-a13-ir";
+			compatible = "allwinner,sun6i-a31-ir";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_ir_pins>;

arch/arm/boot/dts/sunxi-h3-h5.dtsi

@@ -114,10 +114,10 @@ soc {
 		display_clocks: clock@1000000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01000000 0x100000>;
-			clocks = <&ccu CLK_DE>,
-				 <&ccu CLK_BUS_DE>;
-			clock-names = "mod",
-				      "bus";
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
 			resets = <&ccu RST_BUS_DE>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -484,7 +484,7 @@ uart3_rts_cts_pins: uart3-rts-cts-pins {
 		};
 
 		timer@1c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
+			compatible = "allwinner,sun8i-a23-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -574,6 +574,7 @@ wdt0: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		spdif: spdif@1c21000 {
@@ -765,7 +766,7 @@ hdmi: hdmi@1ee0000 {
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+			phy-names = "phy";
 			status = "disabled";
 
 			ports {
@@ -822,7 +823,7 @@ codec_analog: codec-analog@1f015c0 {
 		};
 
 		ir: ir@1f02000 {
-			compatible = "allwinner,sun5i-a13-ir";
+			compatible = "allwinner,sun6i-a31-ir";
 			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
 			clock-names = "apb", "ir";
 			resets = <&r_ccu RST_APB0_IR>;

arch/arm64/boot/dts/allwinner/Makefile

@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino-emmc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
@@ -25,3 +26,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb

arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+ * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
+ */
+
+#include "sun50i-a64-olinuxino.dts"
+
+/ {
+	model = "Olimex A64-Olinuxino-eMMC";
+	compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts

@@ -190,6 +190,10 @@ &ohci1 {
 	status = "okay";
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -228,10 +228,10 @@ bus@1000000 {
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
 				reg = <0x0 0x100000>;
-				clocks = <&ccu CLK_DE>,
-					 <&ccu CLK_BUS_DE>;
-				clock-names = "mod",
-					      "bus";
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
 				resets = <&ccu RST_BUS_DE>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
@@ -1015,7 +1015,7 @@ hdmi: hdmi@1ee0000 {
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+			phy-names = "phy";
 			status = "disabled";
 
 			ports {
@@ -1094,6 +1094,19 @@ r_i2c: i2c@1f02400 {
 			#size-cells = <0>;
 		};
 
+		r_ir: ir@1f02000 {
+			compatible = "allwinner,sun50i-a64-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01f02000 0x400>;
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_rx_pin>;
+			status = "disabled";
+		};
+
 		r_pwm: pwm@1f03800 {
 			compatible = "allwinner,sun50i-a64-pwm",
 				     "allwinner,sun5i-a13-pwm";
@@ -1121,6 +1134,11 @@ r_i2c_pl89_pins: r-i2c-pl89-pins {
 				function = "s_i2c";
 			};
 
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
 			r_pwm_pin: r-pwm-pin {
 				pins = "PL10";
 				function = "s_pwm";
@@ -1151,6 +1169,7 @@ wdt0: watchdog@1c20ca0 {
 				     "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 	};
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -25,6 +25,7 @@ chosen {
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 
 		port {
 			hdmi_con_in: endpoint {
@@ -51,6 +52,24 @@ reg_vcc5v: vcc5v {
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
 };
 
 &de {
@@ -232,6 +251,10 @@ sw {
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &r_pio {
 	/*
 	 * PL0 and PL1 are used for PMIC I2C
@@ -243,6 +266,10 @@ &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

@@ -21,6 +21,18 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -44,12 +56,44 @@ reg_vcc5v: vcc5v {
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_dcdca>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -58,6 +102,16 @@ &ehci3 {
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
@@ -65,6 +119,23 @@ &mmc0 {
 	status = "okay";
 };
 
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -76,6 +147,7 @@ &ohci3 {
 &pio {
 	vcc-pc-supply = <&reg_bldo2>;
 	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
 &r_i2c {

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -189,6 +189,10 @@ sw {
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -255,6 +255,10 @@ pcf8563: rtc@51 {
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &r_pio {
 	vcc-pm-supply = <&reg_aldo1>;
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts

+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Tanix TX6";
+	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi

@@ -56,14 +56,6 @@ de: display-engine {
 		status = "disabled";
 	};
 
-	iosc: internal-osc-clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16000000>;
-		clock-accuracy = <300000000>;
-		clock-output-names = "iosc";
-	};
-
 	osc24M: osc24M_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -71,11 +63,11 @@ osc24M: osc24M_clk {
 		clock-output-names = "osc24M";
 	};
 
-	osc32k: osc32k_clk {
+	ext_osc32k: ext_osc32k_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
-		clock-output-names = "osc32k";
+		clock-output-names = "ext_osc32k";
 	};
 
 	psci {
@@ -197,7 +189,7 @@ ve_sram: sram-section@0 {
 		ccu: clock@3001000 {
 			compatible = "allwinner,sun50i-h6-ccu";
 			reg = <0x03001000 0x1000>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
 			clock-names = "hosc", "losc", "iosc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -215,7 +207,7 @@ dma: dma-controller@3002000 {
 			#dma-cells = <1>;
 		};
 
-		sid: sid@3006000 {
+		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
 		};
@@ -225,6 +217,7 @@ watchdog: watchdog@30090a0 {
 				     "allwinner,sun6i-a31-wdt";
 			reg = <0x030090a0 0x20>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 			/* Broken on some H6 boards */
 			status = "disabled";
 		};
@@ -236,7 +229,7 @@ pio: pinctrl@300b000 {
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -256,6 +249,21 @@ hdmi_pins: hdmi-pins {
 				function = "hdmi";
 			};
 
+			i2c0_pins: i2c0-pins {
+				pins = "PD25", "PD26";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH5", "PH6";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PD23", "PD24";
+				function = "i2c2";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
@@ -282,6 +290,11 @@ mmc2_pins: mmc2-pins {
 				bias-pull-up;
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -391,6 +404,48 @@ uart3: serial@5000c00 {
 			status = "disabled";
 		};
 
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@5020000 {
 			compatible = "allwinner,sun50i-h6-emac",
 				     "allwinner,sun50i-a64-emac";
@@ -411,6 +466,21 @@ mdio: mdio {
 			};
 		};
 
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
 		usb2otg: usb@5100000 {
 			compatible = "allwinner,sun50i-h6-musb",
 				     "allwinner,sun8i-a33-musb";
@@ -504,7 +574,7 @@ hdmi: hdmi@6000000 {
 			resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
 			reset-names = "ctrl", "hdcp";
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+			phy-names = "phy";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdmi_pins>;
 			status = "disabled";
@@ -633,10 +703,20 @@ tcon_tv_out_tcon_top: endpoint@1 {
 			};
 		};
 
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-h6-r-ccu";
 			reg = <0x07010000 0x400>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -648,6 +728,7 @@ r_watchdog: watchdog@7020400 {
 				     "allwinner,sun6i-a31-wdt";
 			reg = <0x07020400 0x20>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		r_intc: interrupt-controller@7021000 {
@@ -664,7 +745,7 @@ r_pio: pinctrl@7022000 {
 			reg = <0x07022000 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -675,10 +756,30 @@ r_i2c_pins: r-i2c-pins {
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL9";
+				function = "s_cir_rx";
+			};
+		};
+
+		r_ir: ir@7040000 {
+				compatible = "allwinner,sun50i-h6-ir",
+					     "allwinner,sun6i-a31-ir";
+				reg = <0x07040000 0x400>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&r_ccu CLK_R_APB1_IR>,
+					 <&r_ccu CLK_IR>;
+				clock-names = "apb", "ir";
+				resets = <&r_ccu RST_R_APB1_IR>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&r_ir_rx_pin>;
+				status = "disabled";
 		};
 
 		r_i2c: i2c@7081400 {
-			compatible = "allwinner,sun6i-a31-i2c";
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C>;