Commit dbf15080 authored by Boris Brezillon's avatar Boris Brezillon Committed by Miquel Raynal

mtd: rawnand: davinci: Get rid of the legacy interface implementation

Now that exec_op() is implemented we can get rid of the legacy interface
implementation.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Tested-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200513172248.141402-4-boris.brezillon@collabora.com
parent 547aa7c2
......@@ -81,38 +81,6 @@ static inline void davinci_nand_writel(struct davinci_nand_info *info,
/*----------------------------------------------------------------------*/
/*
* Access to hardware control lines: ALE, CLE, secondary chipselect.
*/
static void nand_davinci_hwcontrol(struct nand_chip *nand, int cmd,
unsigned int ctrl)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(nand));
void __iomem *addr = info->current_cs;
if (ctrl & NAND_CTRL_CLE)
addr += info->mask_cle;
else if (ctrl & NAND_CTRL_ALE)
addr += info->mask_ale;
if (cmd != NAND_CMD_NONE)
iowrite8(cmd, addr);
}
static void nand_davinci_select_chip(struct nand_chip *nand, int chip)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(nand));
info->current_cs = info->vaddr;
/* maybe kick in a second chipselect */
if (chip > 0)
info->current_cs += info->mask_chipsel;
}
/*----------------------------------------------------------------------*/
/*
* 1-bit hardware ECC ... context maintained for each core chipselect
*/
......@@ -405,54 +373,6 @@ static int nand_davinci_correct_4bit(struct nand_chip *chip, u_char *data,
/*----------------------------------------------------------------------*/
/*
* NOTE: NAND boot requires ALE == EM_A[1], CLE == EM_A[2], so that's
* how these chips are normally wired. This translates to both 8 and 16
* bit busses using ALE == BIT(3) in byte addresses, and CLE == BIT(4).
*
* For now we assume that configuration, or any other one which ignores
* the two LSBs for NAND access ... so we can issue 32-bit reads/writes
* and have that transparently morphed into multiple NAND operations.
*/
static void nand_davinci_read_buf(struct nand_chip *chip, uint8_t *buf,
int len)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
if ((0x03 & ((uintptr_t)buf)) == 0 && (0x03 & len) == 0)
ioread32_rep(info->current_cs, buf, len >> 2);
else if ((0x01 & ((uintptr_t)buf)) == 0 && (0x01 & len) == 0)
ioread16_rep(info->current_cs, buf, len >> 1);
else
ioread8_rep(info->current_cs, buf, len);
}
static void nand_davinci_write_buf(struct nand_chip *chip, const uint8_t *buf,
int len)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
if ((0x03 & ((uintptr_t)buf)) == 0 && (0x03 & len) == 0)
iowrite32_rep(info->current_cs, buf, len >> 2);
else if ((0x01 & ((uintptr_t)buf)) == 0 && (0x01 & len) == 0)
iowrite16_rep(info->current_cs, buf, len >> 1);
else
iowrite8_rep(info->current_cs, buf, len);
}
/*
* Check hardware register for wait status. Returns 1 if device is ready,
* 0 if it is still busy.
*/
static int nand_davinci_dev_ready(struct nand_chip *chip)
{
struct davinci_nand_info *info = to_davinci_nand(nand_to_mtd(chip));
return davinci_nand_readl(info, NANDFSR_OFFSET) & BIT(0);
}
/*----------------------------------------------------------------------*/
/* An ECC layout for using 4-bit ECC with small-page flash, storing
* ten ECC bytes plus the manufacturer's bad block marker byte, and
* and not overlapping the default BBT markers.
......@@ -843,9 +763,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
mtd->dev.parent = &pdev->dev;
nand_set_flash_node(&info->chip, pdev->dev.of_node);
info->chip.legacy.chip_delay = 0;
info->chip.legacy.select_chip = nand_davinci_select_chip;
/* options such as NAND_BBT_USE_FLASH */
info->chip.bbt_options = pdata->bbt_options;
/* options such as 16-bit widths */
......@@ -862,14 +779,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->mask_ale = pdata->mask_ale ? : MASK_ALE;
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
/* Set address of hardware control function */
info->chip.legacy.cmd_ctrl = nand_davinci_hwcontrol;
info->chip.legacy.dev_ready = nand_davinci_dev_ready;
/* Speed up buffer I/O */
info->chip.legacy.read_buf = nand_davinci_read_buf;
info->chip.legacy.write_buf = nand_davinci_write_buf;
/* Use board-specific ECC config */
info->chip.ecc.mode = pdata->ecc_mode;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment