Skip to content

L
linux
Commit dc62bfdf authored by Lee Jones's avatar Lee Jones Committed by Maxime Coquelin
Browse files
Options

ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase 

Suggested-by: default avatarOlof Johansson <olof@lixom.net>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarMaxime Coquelin <maxime.coquelin@st.com>
parent c759e5f7
Hide whitespace changes
Inline Side-by-side
Showing with 350 additions and 350 deletions
arch/arm/boot/dts/stih415-pinctrl.dtsi
View file @ dc62bfdf
...@@ -11,33 +11,33 @@ ...@@ -11,33 +11,33 @@
/ { / {
aliases { aliases {
gpio0 = &PIO0; gpio0 = &pio0;
gpio1 = &PIO1; gpio1 = &pio1;
gpio2 = &PIO2; gpio2 = &pio2;
gpio3 = &PIO3; gpio3 = &pio3;
gpio4 = &PIO4; gpio4 = &pio4;
gpio5 = &PIO5; gpio5 = &pio5;
gpio6 = &PIO6; gpio6 = &pio6;
gpio7 = &PIO7; gpio7 = &pio7;
gpio8 = &PIO8; gpio8 = &pio8;
gpio9 = &PIO9; gpio9 = &pio9;
gpio10 = &PIO10; gpio10 = &pio10;
gpio11 = &PIO11; gpio11 = &pio11;
gpio12 = &PIO12; gpio12 = &pio12;
gpio13 = &PIO13; gpio13 = &pio13;
gpio14 = &PIO14; gpio14 = &pio14;
gpio15 = &PIO15; gpio15 = &pio15;
gpio16 = &PIO16; gpio16 = &pio16;
gpio17 = &PIO17; gpio17 = &pio17;
gpio18 = &PIO18; gpio18 = &pio18;
gpio19 = &PIO100; gpio19 = &pio100;
gpio20 = &PIO101; gpio20 = &pio101;
gpio21 = &PIO102; gpio21 = &pio102;
gpio22 = &PIO103; gpio22 = &pio103;
gpio23 = &PIO104; gpio23 = &pio104;
gpio24 = &PIO105; gpio24 = &pio105;
gpio25 = &PIO106; gpio25 = &pio106;
gpio26 = &PIO107; gpio26 = &pio107;
}; };
soc { soc {
...@@ -52,7 +52,7 @@ pin-controller-sbc { ...@@ -52,7 +52,7 @@ pin-controller-sbc {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x5000>; ranges = <0 0xfe610000 0x5000>;
PIO0: gpio@fe610000 { pio0: gpio@fe610000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -60,7 +60,7 @@ PIO0: gpio@fe610000 { ...@@ -60,7 +60,7 @@ PIO0: gpio@fe610000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO0"; st,bank-name = "PIO0";
}; };
PIO1: gpio@fe611000 { pio1: gpio@fe611000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -68,7 +68,7 @@ PIO1: gpio@fe611000 { ...@@ -68,7 +68,7 @@ PIO1: gpio@fe611000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO1"; st,bank-name = "PIO1";
}; };
PIO2: gpio@fe612000 { pio2: gpio@fe612000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -76,7 +76,7 @@ PIO2: gpio@fe612000 { ...@@ -76,7 +76,7 @@ PIO2: gpio@fe612000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO2"; st,bank-name = "PIO2";
}; };
PIO3: gpio@fe613000 { pio3: gpio@fe613000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -84,7 +84,7 @@ PIO3: gpio@fe613000 { ...@@ -84,7 +84,7 @@ PIO3: gpio@fe613000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO3"; st,bank-name = "PIO3";
}; };
PIO4: gpio@fe614000 { pio4: gpio@fe614000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -96,8 +96,8 @@ PIO4: gpio@fe614000 { ...@@ -96,8 +96,8 @@ PIO4: gpio@fe614000 {
sbc_serial1 { sbc_serial1 {
pinctrl_sbc_serial1:sbc_serial1 { pinctrl_sbc_serial1:sbc_serial1 {
st,pins { st,pins {
tx = <&PIO2 6 ALT3 OUT>; tx = <&pio2 6 ALT3 OUT>;
rx = <&PIO2 7 ALT3 IN>; rx = <&pio2 7 ALT3 IN>;
}; };
}; };
}; };
...@@ -105,15 +105,15 @@ st,pins { ...@@ -105,15 +105,15 @@ st,pins {
keyscan { keyscan {
pinctrl_keyscan: keyscan { pinctrl_keyscan: keyscan {
st,pins { st,pins {
keyin0 = <&PIO0 2 ALT2 IN>; keyin0 = <&pio0 2 ALT2 IN>;
keyin1 = <&PIO0 3 ALT2 IN>; keyin1 = <&pio0 3 ALT2 IN>;
keyin2 = <&PIO0 4 ALT2 IN>; keyin2 = <&pio0 4 ALT2 IN>;
keyin3 = <&PIO2 6 ALT2 IN>; keyin3 = <&pio2 6 ALT2 IN>;
keyout0 = <&PIO1 6 ALT2 OUT>; keyout0 = <&pio1 6 ALT2 OUT>;
keyout1 = <&PIO1 7 ALT2 OUT>; keyout1 = <&pio1 7 ALT2 OUT>;
keyout2 = <&PIO0 6 ALT2 OUT>; keyout2 = <&pio0 6 ALT2 OUT>;
keyout3 = <&PIO2 7 ALT2 OUT>; keyout3 = <&pio2 7 ALT2 OUT>;
}; };
}; };
}; };
...@@ -121,8 +121,8 @@ st,pins { ...@@ -121,8 +121,8 @@ st,pins {
sbc_i2c0 { sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default { pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins { st,pins {
sda = <&PIO4 6 ALT1 BIDIR>; sda = <&pio4 6 ALT1 BIDIR>;
scl = <&PIO4 5 ALT1 BIDIR>; scl = <&pio4 5 ALT1 BIDIR>;
}; };
}; };
}; };
...@@ -130,8 +130,8 @@ st,pins { ...@@ -130,8 +130,8 @@ st,pins {
sbc_i2c1 { sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default { pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins { st,pins {
sda = <&PIO3 2 ALT2 BIDIR>; sda = <&pio3 2 ALT2 BIDIR>;
scl = <&PIO3 1 ALT2 BIDIR>; scl = <&pio3 1 ALT2 BIDIR>;
}; };
}; };
}; };
...@@ -139,7 +139,7 @@ st,pins { ...@@ -139,7 +139,7 @@ st,pins {
rc{ rc{
pinctrl_ir: ir0 { pinctrl_ir: ir0 {
st,pins { st,pins {
ir = <&PIO4 0 ALT2 IN>; ir = <&pio4 0 ALT2 IN>;
}; };
}; };
}; };
...@@ -147,49 +147,49 @@ st,pins { ...@@ -147,49 +147,49 @@ st,pins {
gmac1 { gmac1 {
pinctrl_mii1: mii1 { pinctrl_mii1: mii1 {
st,pins { st,pins {
txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
col = <&PIO0 7 ALT1 IN BYPASS 1000>; col = <&pio0 7 ALT1 IN BYPASS 1000>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
crs = <&PIO1 2 ALT1 IN BYPASS 1000>; crs = <&pio1 2 ALT1 IN BYPASS 1000>;
mdint = <&PIO1 3 ALT1 IN BYPASS 0>; mdint = <&pio1 3 ALT1 IN BYPASS 0>;
rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>; phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>;
}; };
}; };
pinctrl_rgmii1: rgmii1-0 { pinctrl_rgmii1: rgmii1-0 {
st,pins { st,pins {
txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>; txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>; txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>; txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>; txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>;
txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>; rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>; rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>; rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>; rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
}; };
}; };
}; };
...@@ -206,7 +206,7 @@ pin-controller-front { ...@@ -206,7 +206,7 @@ pin-controller-front {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x8000>; ranges = <0 0xfee00000 0x8000>;
PIO5: gpio@fee00000 { pio5: gpio@fee00000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -214,7 +214,7 @@ PIO5: gpio@fee00000 { ...@@ -214,7 +214,7 @@ PIO5: gpio@fee00000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO5"; st,bank-name = "PIO5";
}; };
PIO6: gpio@fee01000 { pio6: gpio@fee01000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -222,7 +222,7 @@ PIO6: gpio@fee01000 { ...@@ -222,7 +222,7 @@ PIO6: gpio@fee01000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO6"; st,bank-name = "PIO6";
}; };
PIO7: gpio@fee02000 { pio7: gpio@fee02000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -230,7 +230,7 @@ PIO7: gpio@fee02000 { ...@@ -230,7 +230,7 @@ PIO7: gpio@fee02000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO7"; st,bank-name = "PIO7";
}; };
PIO8: gpio@fee03000 { pio8: gpio@fee03000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -238,7 +238,7 @@ PIO8: gpio@fee03000 { ...@@ -238,7 +238,7 @@ PIO8: gpio@fee03000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO8"; st,bank-name = "PIO8";
}; };
PIO9: gpio@fee04000 { pio9: gpio@fee04000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -246,7 +246,7 @@ PIO9: gpio@fee04000 { ...@@ -246,7 +246,7 @@ PIO9: gpio@fee04000 {
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
st,bank-name = "PIO9"; st,bank-name = "PIO9";
}; };
PIO10: gpio@fee05000 { pio10: gpio@fee05000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -254,7 +254,7 @@ PIO10: gpio@fee05000 { ...@@ -254,7 +254,7 @@ PIO10: gpio@fee05000 {
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
st,bank-name = "PIO10"; st,bank-name = "PIO10";
}; };
PIO11: gpio@fee06000 { pio11: gpio@fee06000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -262,7 +262,7 @@ PIO11: gpio@fee06000 { ...@@ -262,7 +262,7 @@ PIO11: gpio@fee06000 {
reg = <0x6000 0x100>; reg = <0x6000 0x100>;
st,bank-name = "PIO11"; st,bank-name = "PIO11";
}; };
PIO12: gpio@fee07000 { pio12: gpio@fee07000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -274,8 +274,8 @@ PIO12: gpio@fee07000 { ...@@ -274,8 +274,8 @@ PIO12: gpio@fee07000 {
i2c0 { i2c0 {
pinctrl_i2c0_default: i2c0-default { pinctrl_i2c0_default: i2c0-default {
st,pins { st,pins {
sda = <&PIO9 3 ALT1 BIDIR>; sda = <&pio9 3 ALT1 BIDIR>;
scl = <&PIO9 2 ALT1 BIDIR>; scl = <&pio9 2 ALT1 BIDIR>;
}; };
}; };
}; };
...@@ -283,8 +283,8 @@ st,pins { ...@@ -283,8 +283,8 @@ st,pins {
i2c1 { i2c1 {
pinctrl_i2c1_default: i2c1-default { pinctrl_i2c1_default: i2c1-default {
st,pins { st,pins {
sda = <&PIO12 1 ALT1 BIDIR>; sda = <&pio12 1 ALT1 BIDIR>;
scl = <&PIO12 0 ALT1 BIDIR>; scl = <&pio12 0 ALT1 BIDIR>;
}; };
}; };
}; };
...@@ -301,7 +301,7 @@ pin-controller-rear { ...@@ -301,7 +301,7 @@ pin-controller-rear {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x8000>; ranges = <0 0xfe820000 0x8000>;
PIO13: gpio@fe820000 { pio13: gpio@fe820000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -309,7 +309,7 @@ PIO13: gpio@fe820000 { ...@@ -309,7 +309,7 @@ PIO13: gpio@fe820000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO13"; st,bank-name = "PIO13";
}; };
PIO14: gpio@fe821000 { pio14: gpio@fe821000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -317,7 +317,7 @@ PIO14: gpio@fe821000 { ...@@ -317,7 +317,7 @@ PIO14: gpio@fe821000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO14"; st,bank-name = "PIO14";
}; };
PIO15: gpio@fe822000 { pio15: gpio@fe822000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -325,7 +325,7 @@ PIO15: gpio@fe822000 { ...@@ -325,7 +325,7 @@ PIO15: gpio@fe822000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO15"; st,bank-name = "PIO15";
}; };
PIO16: gpio@fe823000 { pio16: gpio@fe823000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -333,7 +333,7 @@ PIO16: gpio@fe823000 { ...@@ -333,7 +333,7 @@ PIO16: gpio@fe823000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO16"; st,bank-name = "PIO16";
}; };
PIO17: gpio@fe824000 { pio17: gpio@fe824000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -341,7 +341,7 @@ PIO17: gpio@fe824000 { ...@@ -341,7 +341,7 @@ PIO17: gpio@fe824000 {
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
st,bank-name = "PIO17"; st,bank-name = "PIO17";
}; };
PIO18: gpio@fe825000 { pio18: gpio@fe825000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -353,8 +353,8 @@ PIO18: gpio@fe825000 { ...@@ -353,8 +353,8 @@ PIO18: gpio@fe825000 {
serial2 { serial2 {
pinctrl_serial2: serial2-0 { pinctrl_serial2: serial2-0 {
st,pins { st,pins {
tx = <&PIO17 4 ALT2 OUT>; tx = <&pio17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>; rx = <&pio17 5 ALT2 IN>;
}; };
}; };
}; };
...@@ -362,68 +362,68 @@ st,pins { ...@@ -362,68 +362,68 @@ st,pins {
gmac0{ gmac0{
pinctrl_mii0: mii0 { pinctrl_mii0: mii0 {
st,pins { st,pins {
mdint = <&PIO13 6 ALT2 IN BYPASS 0>; mdint = <&pio13 6 ALT2 IN BYPASS 0>;
txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
crs = <&PIO15 2 ALT2 IN BYPASS 1000>; crs = <&pio15 2 ALT2 IN BYPASS 1000>;
col = <&PIO15 3 ALT2 IN BYPASS 1000>; col = <&pio15 3 ALT2 IN BYPASS 1000>;
mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>; phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>;
}; };
}; };
pinctrl_gmii0: gmii0 { pinctrl_gmii0: gmii0 {
st,pins { st,pins {
mdint = <&PIO13 6 ALT2 IN BYPASS 0>; mdint = <&pio13 6 ALT2 IN BYPASS 0>;
mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
crs = <&PIO15 2 ALT2 IN BYPASS 1000>; crs = <&pio15 2 ALT2 IN BYPASS 1000>;
col = <&PIO15 3 ALT2 IN BYPASS 1000>; col = <&pio15 3 ALT2 IN BYPASS 1000>;
rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>; clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>; phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
}; };
...@@ -442,7 +442,7 @@ pin-controller-left { ...@@ -442,7 +442,7 @@ pin-controller-left {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>; ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 { pio100: gpio@fd6b0000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -450,7 +450,7 @@ PIO100: gpio@fd6b0000 { ...@@ -450,7 +450,7 @@ PIO100: gpio@fd6b0000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO100"; st,bank-name = "PIO100";
}; };
PIO101: gpio@fd6b1000 { pio101: gpio@fd6b1000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -458,7 +458,7 @@ PIO101: gpio@fd6b1000 { ...@@ -458,7 +458,7 @@ PIO101: gpio@fd6b1000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO101"; st,bank-name = "PIO101";
}; };
PIO102: gpio@fd6b2000 { pio102: gpio@fd6b2000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -479,7 +479,7 @@ pin-controller-right { ...@@ -479,7 +479,7 @@ pin-controller-right {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>; ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 { pio103: gpio@fd330000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -487,7 +487,7 @@ PIO103: gpio@fd330000 { ...@@ -487,7 +487,7 @@ PIO103: gpio@fd330000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO103"; st,bank-name = "PIO103";
}; };
PIO104: gpio@fd331000 { pio104: gpio@fd331000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -495,7 +495,7 @@ PIO104: gpio@fd331000 { ...@@ -495,7 +495,7 @@ PIO104: gpio@fd331000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO104"; st,bank-name = "PIO104";
}; };
PIO105: gpio@fd332000 { pio105: gpio@fd332000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -503,7 +503,7 @@ PIO105: gpio@fd332000 { ...@@ -503,7 +503,7 @@ PIO105: gpio@fd332000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO105"; st,bank-name = "PIO105";
}; };
PIO106: gpio@fd333000 { pio106: gpio@fd333000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -511,7 +511,7 @@ PIO106: gpio@fd333000 { ...@@ -511,7 +511,7 @@ PIO106: gpio@fd333000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO106"; st,bank-name = "PIO106";
}; };
PIO107: gpio@fd334000 { pio107: gpio@fd334000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
......
arch/arm/boot/dts/stih416-b2020e.dts
View file @ dc62bfdf
...@@ -19,17 +19,17 @@ leds { ...@@ -19,17 +19,17 @@ leds {
red { red {
#gpio-cells = <1>; #gpio-cells = <1>;
label = "Front Panel LED"; label = "Front Panel LED";
gpios = <&PIO4 1>; gpios = <&pio4 1>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
green { green {
gpios = <&PIO1 3>; gpios = <&pio1 3>;
default-state = "off"; default-state = "off";
}; };
}; };
ethernet1: dwmac@fef08000 { ethernet1: dwmac@fef08000 {
snps,reset-gpio = <&PIO0 7>; snps,reset-gpio = <&pio0 7>;
}; };
}; };
}; };
arch/arm/boot/dts/stih416-pinctrl.dtsi
View file @ dc62bfdf
...@@ -12,36 +12,36 @@ ...@@ -12,36 +12,36 @@
/ { / {
aliases { aliases {
gpio0 = &PIO0; gpio0 = &pio0;
gpio1 = &PIO1; gpio1 = &pio1;
gpio2 = &PIO2; gpio2 = &pio2;
gpio3 = &PIO3; gpio3 = &pio3;
gpio4 = &PIO4; gpio4 = &pio4;
gpio5 = &PIO40; gpio5 = &pio40;
gpio6 = &PIO5; gpio6 = &pio5;
gpio7 = &PIO6; gpio7 = &pio6;
gpio8 = &PIO7; gpio8 = &pio7;
gpio9 = &PIO8; gpio9 = &pio8;
gpio10 = &PIO9; gpio10 = &pio9;
gpio11 = &PIO10; gpio11 = &pio10;
gpio12 = &PIO11; gpio12 = &pio11;
gpio13 = &PIO12; gpio13 = &pio12;
gpio14 = &PIO30; gpio14 = &pio30;
gpio15 = &PIO31; gpio15 = &pio31;
gpio16 = &PIO13; gpio16 = &pio13;
gpio17 = &PIO14; gpio17 = &pio14;
gpio18 = &PIO15; gpio18 = &pio15;
gpio19 = &PIO16; gpio19 = &pio16;
gpio20 = &PIO17; gpio20 = &pio17;
gpio21 = &PIO18; gpio21 = &pio18;
gpio22 = &PIO100; gpio22 = &pio100;
gpio23 = &PIO101; gpio23 = &pio101;
gpio24 = &PIO102; gpio24 = &pio102;
gpio25 = &PIO103; gpio25 = &pio103;
gpio26 = &PIO104; gpio26 = &pio104;
gpio27 = &PIO105; gpio27 = &pio105;
gpio28 = &PIO106; gpio28 = &pio106;
gpio29 = &PIO107; gpio29 = &pio107;
}; };
soc { soc {
...@@ -56,7 +56,7 @@ pin-controller-sbc { ...@@ -56,7 +56,7 @@ pin-controller-sbc {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x6000>; ranges = <0 0xfe610000 0x6000>;
PIO0: gpio@fe610000 { pio0: gpio@fe610000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -64,7 +64,7 @@ PIO0: gpio@fe610000 { ...@@ -64,7 +64,7 @@ PIO0: gpio@fe610000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO0"; st,bank-name = "PIO0";
}; };
PIO1: gpio@fe611000 { pio1: gpio@fe611000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -72,7 +72,7 @@ PIO1: gpio@fe611000 { ...@@ -72,7 +72,7 @@ PIO1: gpio@fe611000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO1"; st,bank-name = "PIO1";
}; };
PIO2: gpio@fe612000 { pio2: gpio@fe612000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -80,7 +80,7 @@ PIO2: gpio@fe612000 { ...@@ -80,7 +80,7 @@ PIO2: gpio@fe612000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO2"; st,bank-name = "PIO2";
}; };
PIO3: gpio@fe613000 { pio3: gpio@fe613000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -88,7 +88,7 @@ PIO3: gpio@fe613000 { ...@@ -88,7 +88,7 @@ PIO3: gpio@fe613000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO3"; st,bank-name = "PIO3";
}; };
PIO4: gpio@fe614000 { pio4: gpio@fe614000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -96,7 +96,7 @@ PIO4: gpio@fe614000 { ...@@ -96,7 +96,7 @@ PIO4: gpio@fe614000 {
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
st,bank-name = "PIO4"; st,bank-name = "PIO4";
}; };
PIO40: gpio@fe615000 { pio40: gpio@fe615000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -109,15 +109,15 @@ PIO40: gpio@fe615000 { ...@@ -109,15 +109,15 @@ PIO40: gpio@fe615000 {
rc{ rc{
pinctrl_ir: ir0 { pinctrl_ir: ir0 {
st,pins { st,pins {
ir = <&PIO4 0 ALT2 IN>; ir = <&pio4 0 ALT2 IN>;
}; };
}; };
}; };
sbc_serial1 { sbc_serial1 {
pinctrl_sbc_serial1: sbc_serial1 { pinctrl_sbc_serial1: sbc_serial1 {
st,pins { st,pins {
tx = <&PIO2 6 ALT3 OUT>; tx = <&pio2 6 ALT3 OUT>;
rx = <&PIO2 7 ALT3 IN>; rx = <&pio2 7 ALT3 IN>;
}; };
}; };
}; };
...@@ -125,15 +125,15 @@ st,pins { ...@@ -125,15 +125,15 @@ st,pins {
keyscan { keyscan {
pinctrl_keyscan: keyscan { pinctrl_keyscan: keyscan {
st,pins { st,pins {
keyin0 = <&PIO0 2 ALT2 IN>; keyin0 = <&pio0 2 ALT2 IN>;
keyin1 = <&PIO0 3 ALT2 IN>; keyin1 = <&pio0 3 ALT2 IN>;
keyin2 = <&PIO0 4 ALT2 IN>; keyin2 = <&pio0 4 ALT2 IN>;
keyin3 = <&PIO2 6 ALT2 IN>; keyin3 = <&pio2 6 ALT2 IN>;
keyout0 = <&PIO1 6 ALT2 OUT>; keyout0 = <&pio1 6 ALT2 OUT>;
keyout1 = <&PIO1 7 ALT2 OUT>; keyout1 = <&pio1 7 ALT2 OUT>;
keyout2 = <&PIO0 6 ALT2 OUT>; keyout2 = <&pio0 6 ALT2 OUT>;
keyout3 = <&PIO2 7 ALT2 OUT>; keyout3 = <&pio2 7 ALT2 OUT>;
}; };
}; };
}; };
...@@ -141,8 +141,8 @@ st,pins { ...@@ -141,8 +141,8 @@ st,pins {
sbc_i2c0 { sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default { pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins { st,pins {
sda = <&PIO4 6 ALT1 BIDIR>; sda = <&pio4 6 ALT1 BIDIR>;
scl = <&PIO4 5 ALT1 BIDIR>; scl = <&pio4 5 ALT1 BIDIR>;
}; };
}; };
}; };
...@@ -150,8 +150,8 @@ st,pins { ...@@ -150,8 +150,8 @@ st,pins {
sbc_i2c1 { sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default { pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins { st,pins {
sda = <&PIO3 2 ALT2 BIDIR>; sda = <&pio3 2 ALT2 BIDIR>;
scl = <&PIO3 1 ALT2 BIDIR>; scl = <&pio3 1 ALT2 BIDIR>;
}; };
}; };
}; };
...@@ -159,51 +159,51 @@ st,pins { ...@@ -159,51 +159,51 @@ st,pins {
gmac1 { gmac1 {
pinctrl_mii1: mii1 { pinctrl_mii1: mii1 {
st,pins { st,pins {
txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
col = <&PIO0 7 ALT1 IN BYPASS 1000>; col = <&pio0 7 ALT1 IN BYPASS 1000>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>; mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
crs = <&PIO1 2 ALT1 IN BYPASS 1000>; crs = <&pio1 2 ALT1 IN BYPASS 1000>;
mdint = <&PIO1 3 ALT1 IN BYPASS 0>; mdint = <&pio1 3 ALT1 IN BYPASS 0>;
rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>; phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
}; };
}; };
pinctrl_rgmii1: rgmii1-0 { pinctrl_rgmii1: rgmii1-0 {
st,pins { st,pins {
txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>; txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>; txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>; txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>; txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>; rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>; rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>; rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>; rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
}; };
}; };
}; };
...@@ -220,7 +220,7 @@ pin-controller-front { ...@@ -220,7 +220,7 @@ pin-controller-front {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x10000>; ranges = <0 0xfee00000 0x10000>;
PIO5: gpio@fee00000 { pio5: gpio@fee00000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -228,7 +228,7 @@ PIO5: gpio@fee00000 { ...@@ -228,7 +228,7 @@ PIO5: gpio@fee00000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO5"; st,bank-name = "PIO5";
}; };
PIO6: gpio@fee01000 { pio6: gpio@fee01000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -236,7 +236,7 @@ PIO6: gpio@fee01000 { ...@@ -236,7 +236,7 @@ PIO6: gpio@fee01000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO6"; st,bank-name = "PIO6";
}; };
PIO7: gpio@fee02000 { pio7: gpio@fee02000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -244,7 +244,7 @@ PIO7: gpio@fee02000 { ...@@ -244,7 +244,7 @@ PIO7: gpio@fee02000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO7"; st,bank-name = "PIO7";
}; };
PIO8: gpio@fee03000 { pio8: gpio@fee03000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -252,7 +252,7 @@ PIO8: gpio@fee03000 { ...@@ -252,7 +252,7 @@ PIO8: gpio@fee03000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO8"; st,bank-name = "PIO8";
}; };
PIO9: gpio@fee04000 { pio9: gpio@fee04000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -260,7 +260,7 @@ PIO9: gpio@fee04000 { ...@@ -260,7 +260,7 @@ PIO9: gpio@fee04000 {
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
st,bank-name = "PIO9"; st,bank-name = "PIO9";
}; };
PIO10: gpio@fee05000 { pio10: gpio@fee05000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -268,7 +268,7 @@ PIO10: gpio@fee05000 { ...@@ -268,7 +268,7 @@ PIO10: gpio@fee05000 {
reg = <0x5000 0x100>; reg = <0x5000 0x100>;
st,bank-name = "PIO10"; st,bank-name = "PIO10";
}; };
PIO11: gpio@fee06000 { pio11: gpio@fee06000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -276,7 +276,7 @@ PIO11: gpio@fee06000 { ...@@ -276,7 +276,7 @@ PIO11: gpio@fee06000 {
reg = <0x6000 0x100>; reg = <0x6000 0x100>;
st,bank-name = "PIO11"; st,bank-name = "PIO11";
}; };
PIO12: gpio@fee07000 { pio12: gpio@fee07000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -284,7 +284,7 @@ PIO12: gpio@fee07000 { ...@@ -284,7 +284,7 @@ PIO12: gpio@fee07000 {
reg = <0x7000 0x100>; reg = <0x7000 0x100>;
st,bank-name = "PIO12"; st,bank-name = "PIO12";
}; };
PIO30: gpio@fee08000 { pio30: gpio@fee08000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -292,7 +292,7 @@ PIO30: gpio@fee08000 { ...@@ -292,7 +292,7 @@ PIO30: gpio@fee08000 {
reg = <0x8000 0x100>; reg = <0x8000 0x100>;
st,bank-name = "PIO30"; st,bank-name = "PIO30";
}; };
PIO31: gpio@fee09000 { pio31: gpio@fee09000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -304,7 +304,7 @@ PIO31: gpio@fee09000 { ...@@ -304,7 +304,7 @@ PIO31: gpio@fee09000 {
serial2-oe { serial2-oe {
pinctrl_serial2_oe: serial2-1 { pinctrl_serial2_oe: serial2-1 {
st,pins { st,pins {
output-enable = <&PIO11 3 ALT2 OUT>; output-enable = <&pio11 3 ALT2 OUT>;
}; };
}; };
}; };
...@@ -312,8 +312,8 @@ st,pins { ...@@ -312,8 +312,8 @@ st,pins {
i2c0 { i2c0 {
pinctrl_i2c0_default: i2c0-default { pinctrl_i2c0_default: i2c0-default {
st,pins { st,pins {
sda = <&PIO9 3 ALT1 BIDIR>; sda = <&pio9 3 ALT1 BIDIR>;
scl = <&PIO9 2 ALT1 BIDIR>; scl = <&pio9 2 ALT1 BIDIR>;
}; };
}; };
}; };
...@@ -321,8 +321,8 @@ st,pins { ...@@ -321,8 +321,8 @@ st,pins {
i2c1 { i2c1 {
pinctrl_i2c1_default: i2c1-default { pinctrl_i2c1_default: i2c1-default {
st,pins { st,pins {
sda = <&PIO12 1 ALT1 BIDIR>; sda = <&pio12 1 ALT1 BIDIR>;
scl = <&PIO12 0 ALT1 BIDIR>; scl = <&pio12 0 ALT1 BIDIR>;
}; };
}; };
}; };
...@@ -330,12 +330,12 @@ st,pins { ...@@ -330,12 +330,12 @@ st,pins {
fsm { fsm {
pinctrl_fsm: fsm { pinctrl_fsm: fsm {
st,pins { st,pins {
spi-fsm-clk = <&PIO12 2 ALT1 OUT>; spi-fsm-clk = <&pio12 2 ALT1 OUT>;
spi-fsm-cs = <&PIO12 3 ALT1 OUT>; spi-fsm-cs = <&pio12 3 ALT1 OUT>;
spi-fsm-mosi = <&PIO12 4 ALT1 OUT>; spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
spi-fsm-miso = <&PIO12 5 ALT1 IN>; spi-fsm-miso = <&pio12 5 ALT1 IN>;
spi-fsm-hol = <&PIO12 6 ALT1 OUT>; spi-fsm-hol = <&pio12 6 ALT1 OUT>;
spi-fsm-wp = <&PIO12 7 ALT1 OUT>; spi-fsm-wp = <&pio12 7 ALT1 OUT>;
}; };
}; };
}; };
...@@ -352,7 +352,7 @@ pin-controller-rear { ...@@ -352,7 +352,7 @@ pin-controller-rear {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x6000>; ranges = <0 0xfe820000 0x6000>;
PIO13: gpio@fe820000 { pio13: gpio@fe820000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -360,7 +360,7 @@ PIO13: gpio@fe820000 { ...@@ -360,7 +360,7 @@ PIO13: gpio@fe820000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO13"; st,bank-name = "PIO13";
}; };
PIO14: gpio@fe821000 { pio14: gpio@fe821000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -368,7 +368,7 @@ PIO14: gpio@fe821000 { ...@@ -368,7 +368,7 @@ PIO14: gpio@fe821000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO14"; st,bank-name = "PIO14";
}; };
PIO15: gpio@fe822000 { pio15: gpio@fe822000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -376,7 +376,7 @@ PIO15: gpio@fe822000 { ...@@ -376,7 +376,7 @@ PIO15: gpio@fe822000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO15"; st,bank-name = "PIO15";
}; };
PIO16: gpio@fe823000 { pio16: gpio@fe823000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -384,7 +384,7 @@ PIO16: gpio@fe823000 { ...@@ -384,7 +384,7 @@ PIO16: gpio@fe823000 {
reg = <0x3000 0x100>; reg = <0x3000 0x100>;
st,bank-name = "PIO16"; st,bank-name = "PIO16";
}; };
PIO17: gpio@fe824000 { pio17: gpio@fe824000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -392,7 +392,7 @@ PIO17: gpio@fe824000 { ...@@ -392,7 +392,7 @@ PIO17: gpio@fe824000 {
reg = <0x4000 0x100>; reg = <0x4000 0x100>;
st,bank-name = "PIO17"; st,bank-name = "PIO17";
}; };
PIO18: gpio@fe825000 { pio18: gpio@fe825000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -405,8 +405,8 @@ PIO18: gpio@fe825000 { ...@@ -405,8 +405,8 @@ PIO18: gpio@fe825000 {
serial2 { serial2 {
pinctrl_serial2: serial2-0 { pinctrl_serial2: serial2-0 {
st,pins { st,pins {
tx = <&PIO17 4 ALT2 OUT>; tx = <&pio17 4 ALT2 OUT>;
rx = <&PIO17 5 ALT2 IN>; rx = <&pio17 5 ALT2 IN>;
}; };
}; };
}; };
...@@ -414,28 +414,28 @@ st,pins { ...@@ -414,28 +414,28 @@ st,pins {
gmac0 { gmac0 {
pinctrl_mii0: mii0 { pinctrl_mii0: mii0 {
st,pins { st,pins {
mdint = <&PIO13 6 ALT2 IN BYPASS 0>; mdint = <&pio13 6 ALT2 IN BYPASS 0>;
txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
crs = <&PIO15 2 ALT2 IN BYPASS 1000>; crs = <&pio15 2 ALT2 IN BYPASS 1000>;
col = <&PIO15 3 ALT2 IN BYPASS 1000>; col = <&pio15 3 ALT2 IN BYPASS 1000>;
mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>; mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>; phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
}; };
}; };
...@@ -445,25 +445,25 @@ st,pins { ...@@ -445,25 +445,25 @@ st,pins {
}; };
pinctrl_rgmii0: rgmii0 { pinctrl_rgmii0: rgmii0 {
st,pins { st,pins {
phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>; phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>; txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>; txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>; txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>; txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>; txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
mdio = <&PIO15 4 ALT2 OUT BYPASS 0>; mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>; rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>; rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>;
rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>; rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>;
rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>; rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>;
rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>; rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>; rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>; clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
}; };
}; };
}; };
...@@ -480,7 +480,7 @@ pin-controller-fvdp-fe { ...@@ -480,7 +480,7 @@ pin-controller-fvdp-fe {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>; ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 { pio100: gpio@fd6b0000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -488,7 +488,7 @@ PIO100: gpio@fd6b0000 { ...@@ -488,7 +488,7 @@ PIO100: gpio@fd6b0000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO100"; st,bank-name = "PIO100";
}; };
PIO101: gpio@fd6b1000 { pio101: gpio@fd6b1000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -496,7 +496,7 @@ PIO101: gpio@fd6b1000 { ...@@ -496,7 +496,7 @@ PIO101: gpio@fd6b1000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO101"; st,bank-name = "PIO101";
}; };
PIO102: gpio@fd6b2000 { pio102: gpio@fd6b2000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -517,7 +517,7 @@ pin-controller-fvdp-lite { ...@@ -517,7 +517,7 @@ pin-controller-fvdp-lite {
interrupt-names = "irqmux"; interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>; ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 { pio103: gpio@fd330000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -525,7 +525,7 @@ PIO103: gpio@fd330000 { ...@@ -525,7 +525,7 @@ PIO103: gpio@fd330000 {
reg = <0 0x100>; reg = <0 0x100>;
st,bank-name = "PIO103"; st,bank-name = "PIO103";
}; };
PIO104: gpio@fd331000 { pio104: gpio@fd331000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -533,7 +533,7 @@ PIO104: gpio@fd331000 { ...@@ -533,7 +533,7 @@ PIO104: gpio@fd331000 {
reg = <0x1000 0x100>; reg = <0x1000 0x100>;
st,bank-name = "PIO104"; st,bank-name = "PIO104";
}; };
PIO105: gpio@fd332000 { pio105: gpio@fd332000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -541,7 +541,7 @@ PIO105: gpio@fd332000 { ...@@ -541,7 +541,7 @@ PIO105: gpio@fd332000 {
reg = <0x2000 0x100>; reg = <0x2000 0x100>;
st,bank-name = "PIO105"; st,bank-name = "PIO105";
}; };
PIO106: gpio@fd333000 { pio106: gpio@fd333000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
...@@ -550,7 +550,7 @@ PIO106: gpio@fd333000 { ...@@ -550,7 +550,7 @@ PIO106: gpio@fd333000 {
st,bank-name = "PIO106"; st,bank-name = "PIO106";
}; };
PIO107: gpio@fd334000 { pio107: gpio@fd334000 {
gpio-controller; gpio-controller;
#gpio-cells = <1>; #gpio-cells = <1>;
interrupt-controller; interrupt-controller;
......
arch/arm/boot/dts/stih41x-b2000.dtsi
View file @ dc62bfdf
...@@ -35,7 +35,7 @@ leds { ...@@ -35,7 +35,7 @@ leds {
fp_led { fp_led {
#gpio-cells = <1>; #gpio-cells = <1>;
label = "Front Panel LED"; label = "Front Panel LED";
gpios = <&PIO105 7>; gpios = <&pio105 7>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
...@@ -55,7 +55,7 @@ ethernet0: dwmac@fe810000 { ...@@ -55,7 +55,7 @@ ethernet0: dwmac@fe810000 {
phy-mode = "mii"; phy-mode = "mii";
pinctrl-0 = <&pinctrl_mii0>; pinctrl-0 = <&pinctrl_mii0>;
snps,reset-gpio = <&PIO106 2>; snps,reset-gpio = <&pio106 2>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>; snps,reset-delays-us = <0 10000 10000>;
}; };
...@@ -65,7 +65,7 @@ ethernet1: dwmac@fef08000 { ...@@ -65,7 +65,7 @@ ethernet1: dwmac@fef08000 {
phy-mode = "mii"; phy-mode = "mii";
st,tx-retime-src = "txclk"; st,tx-retime-src = "txclk";
snps,reset-gpio = <&PIO4 7>; snps,reset-gpio = <&pio4 7>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>; snps,reset-delays-us = <0 10000 10000>;
}; };
......
arch/arm/boot/dts/stih41x-b2020.dtsi
View file @ dc62bfdf
...@@ -32,11 +32,11 @@ leds { ...@@ -32,11 +32,11 @@ leds {
red { red {
#gpio-cells = <1>; #gpio-cells = <1>;
label = "Front Panel LED"; label = "Front Panel LED";
gpios = <&PIO4 1>; gpios = <&pio4 1>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
green { green {
gpios = <&PIO4 7>; gpios = <&pio4 7>;
default-state = "off"; default-state = "off";
}; };
}; };
...@@ -68,7 +68,7 @@ ethernet1: dwmac@fef08000 { ...@@ -68,7 +68,7 @@ ethernet1: dwmac@fef08000 {
phy-mode = "rgmii-id"; phy-mode = "rgmii-id";
max-speed = <1000>; max-speed = <1000>;
st,tx-retime-src = "clk_125"; st,tx-retime-src = "clk_125";
snps,reset-gpio = <&PIO3 0>; snps,reset-gpio = <&pio3 0>;
snps,reset-active-low; snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>; snps,reset-delays-us = <0 10000 10000>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7