Commit dc6fc49b authored by Lu Guanqun's avatar Lu Guanqun Committed by Mark Brown

ASoC: Use data based init for max98088 DAPM

Signed-off-by: default avatarLu Guanqun <guanqun.lu@intel.com>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 51fb1a87
......@@ -1112,7 +1112,7 @@ static const struct snd_soc_dapm_widget max98088_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("INB2"),
};
static const struct snd_soc_dapm_route audio_map[] = {
static const struct snd_soc_dapm_route max98088_audio_map[] = {
/* Left headphone output mixer */
{"Left HP Mixer", "Left DAC1 Switch", "DACL1"},
{"Left HP Mixer", "Left DAC2 Switch", "DACL2"},
......@@ -1226,22 +1226,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
{"MIC2 Input", NULL, "MIC2"},
};
static int max98088_add_widgets(struct snd_soc_codec *codec)
{
struct snd_soc_dapm_context *dapm = &codec->dapm;
snd_soc_dapm_new_controls(dapm, max98088_dapm_widgets,
ARRAY_SIZE(max98088_dapm_widgets));
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
snd_soc_add_controls(codec, max98088_snd_controls,
ARRAY_SIZE(max98088_snd_controls));
snd_soc_dapm_new_widgets(dapm);
return 0;
}
/* codec mclk clock divider coefficients */
static const struct {
u32 rate;
......@@ -2010,7 +1994,8 @@ static int max98088_probe(struct snd_soc_codec *codec)
max98088_handle_pdata(codec);
max98088_add_widgets(codec);
snd_soc_add_controls(codec, max98088_snd_controls,
ARRAY_SIZE(max98088_snd_controls));
err_access:
return ret;
......@@ -2036,6 +2021,10 @@ static struct snd_soc_codec_driver soc_codec_dev_max98088 = {
.reg_word_size = sizeof(u8),
.reg_cache_default = max98088_reg,
.volatile_register = max98088_volatile_register,
.dapm_widgets = max98088_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(max98088_dapm_widgets),
.dapm_routes = max98088_audio_map,
.num_dapm_routes = ARRAY_SIZE(max98088_audio_map),
};
static int max98088_i2c_probe(struct i2c_client *i2c,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment