Commit dc8f3703 authored by Sonic Zhang's avatar Sonic Zhang Committed by Greg Kroah-Hartman

serial: bfin-sport-uart: Request CTS GPIO PIN when the sport emulated serial device starts up.

This patch is similar to that for bfin-uart hardware flow control.
Sport emulated serial device may be probed earlier before GPIOLIB is initialized.
Requesting and configuring CTS GPIO PIN fails in that early stage.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Acked-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 07143eae
......@@ -299,8 +299,13 @@ static int sport_startup(struct uart_port *port)
dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
}
}
if (up->rts_pin >= 0)
if (up->rts_pin >= 0) {
if (gpio_request(up->rts_pin, DRV_NAME)) {
dev_info(port->dev, "fail to request RTS PIN at GPIO_%d\n", up->rts_pin);
up->rts_pin = -1;
} else
gpio_direction_output(up->rts_pin, 0);
}
#endif
return 0;
......@@ -445,6 +450,8 @@ static void sport_shutdown(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
if (up->cts_pin >= 0)
free_irq(gpio_to_irq(up->cts_pin), up);
if (up->rts_pin >= 0)
gpio_free(up->rts_pin);
#endif
}
......@@ -811,9 +818,6 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
sport->rts_pin = -1;
else
sport->rts_pin = res->start;
if (sport->rts_pin >= 0)
gpio_request(sport->rts_pin, DRV_NAME);
#endif
}
......@@ -853,10 +857,6 @@ static int __devexit sport_uart_remove(struct platform_device *pdev)
if (sport) {
uart_remove_one_port(&sport_uart_reg, &sport->port);
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (sport->rts_pin >= 0)
gpio_free(sport->rts_pin);
#endif
iounmap(sport->port.membase);
peripheral_free_list(
(unsigned short *)pdev->dev.platform_data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment