Skip to content

L
linux
Commit dccfd1e4 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC DT updates from Olof Johansson:
 "Device tree and bindings updates for 3.12.

  General additions of various on-chip and on-board peripherals on
  various platforms as support gets added.  Some of the bigger changes
  are:

   - Addition of (new) PCI-e support on Tegra.
   - More Tegra4 support, including PMC configuration for Dalmore.
   - Addition of a new board for Exynos4 (trats2) and more bindings for
     4x12 IP.
   - Addition of Allwinner A20 and A31 SoC and board files.
   - Move of the ST Ericsson device tree files to now use ste-* prefix.
   - More move of hardware description of shmobile platforms to DT.
   - Two new board dts files for Freescale MXs"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits)
  dts: Rename DW APB timer compatible strings
  dts: Deprecate ALTR as a vendor prefix
  of: add vendor prefix for Altera Corp.
  ARM: at91/dt: sam9x5ek: add sound configuration
  ARM: at91/dt: sam9x5ek: enable SSC
  ARM: at91/dt: sam9x5ek: add WM8731 codec
  ARM: at91/dt: sam9x5: add SSC DMA parameters
  ARM: at91/dt: add at91rm9200 PQFP package version
  ARM: at91: at91rm9200: set default mmc0 pinctrl-names
  ARM: at91: at91sam9n12: correct pin number of gpio-key
  ARM: at91: at91sam9n12: add qt1070 support
  ARM: at91: at91sam9n12: add pinctrl of TWI
  ARM: at91: Add PMU support for sama5d3
  ARM: at91: at91sam9260: add missing pinctrl-names on mmc
  ARM: tegra: configure power off for Dalmore
  ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
  ARM: dts: add sdio blocks to bcm28155-ap board
  ARM: dts: align sdio numbers to HW definition
  ARM: sun7i: Add Olimex A20-Olinuxino-Micro support
  ARM: sun7i: Add Allwinner A20 DTSI
  ...
parents 8e73e367 56e9e0f3
Show whitespace changes
Inline Side-by-side
Showing with 4721 additions and 641 deletions
Documentation/devicetree/bindings/arm/bcm/bcm11351.txt
View file @ dccfd1e4
......@@ -6,4 +6,5 @@ bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
Required root node property:
compatible = "bcm,bcm11351";
compatible = "brcm,bcm11351";
DEPRECATED: compatible = "bcm,bcm11351";
Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt → Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
View file @ dccfd1e4
......@@ -4,14 +4,15 @@ This timer is used in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
Required properties:
- compatible : "bcm,kona-timer"
- compatible : "brcm,kona-timer"
- DEPRECATED: compatible : "bcm,kona-timer"
- reg : Register range for the timer
- interrupts : interrupt for the timer
- clock-frequency: frequency that the clock operates
Example:
timer@35006000 {
compatible = "bcm,kona-timer";
compatible = "brcm,kona-timer";
reg = <0x35006000 0x1000>;
interrupts = <0x0 7 0x4>;
clock-frequency = <32768>;
......
Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt 0 → 100644
View file @ dccfd1e4
Broadcom Kona Family Watchdog Timer
-----------------------------------
This watchdog timer is used in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
Required properties:
- compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
- reg: memory address & range
Example:
watchdog@35002f40 {
compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
reg = <0x35002f40 0x6c>;
};
Documentation/devicetree/bindings/media/s5p-mfc.txt
View file @ dccfd1e4
......@@ -16,9 +16,9 @@ Required properties:
mapped region.
- interrupts : MFC interrupt number to the CPU.
- clocks : from common clock binding: handle to mfc clocks.
- clock-names : from common clock binding: must contain "sclk_mfc" and "mfc",
corresponding to entries in the clocks property.
- clocks : from common clock binding: handle to mfc clock.
- clock-names : from common clock binding: must contain "mfc",
corresponding to entry in the clocks property.
- samsung,mfc-r : Base address of the first memory bank used by MFC
for DMA contiguous memory allocation and its size.
......@@ -38,8 +38,8 @@ mfc: codec@13400000 {
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
clocks = <&clock 170>, <&clock 273>;
clock-names = "sclk_mfc", "mfc";
clocks = <&clock 273>;
clock-names = "mfc";
};
Board specific DT entry:
......
Documentation/devicetree/bindings/misc/smc.txt
View file @ dccfd1e4
......@@ -4,11 +4,12 @@ This binding defines the location of the bounce buffer
used for non-secure to secure communications.
Required properties:
- compatible : "bcm,kona-smc"
- compatible : "brcm,kona-smc"
- DEPRECATED: compatible : "bcm,kona-smc"
- reg : Location and size of bounce buffer
Example:
smc@0x3404c000 {
compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
reg = <0x3404c000 0x400>; //1 KiB in SRAM
};
Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt → Documentation/devicetree/bindings/mmc/kona-sdhci.txt
View file @ dccfd1e4
......@@ -4,12 +4,13 @@ This file documents differences between the core properties in mmc.txt
and the properties present in the bcm281xx SDHCI
Required properties:
- compatible : Should be "bcm,kona-sdhci"
- compatible : Should be "brcm,kona-sdhci"
- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
Example:
sdio2: sdio@0x3f1a0000 {
compatible = "bcm,kona-sdhci";
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
interrupts = <0x0 74 0x4>;
};
......
Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
View file @ dccfd1e4
......@@ -80,6 +80,17 @@ Valid values for pin and group names are:
dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
gmh, owr, uda.
Valid values for nvidia,functions are:
blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
Example:
pinmux: pinmux {
......
Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
View file @ dccfd1e4
......@@ -103,6 +103,17 @@ Valid values for pin and group names are:
drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
drive_uda.
Valid values for nvidia,functions are:
ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
vi, vi_sensor_clk, xio
Example:
pinctrl@70000000 {
......
Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
View file @ dccfd1e4
......@@ -91,6 +91,18 @@ Valid values for pin and group names are:
gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
uart3, uda, vi1.
Valid values for nvidia,functions are:
blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
vi, vi_alt1, vi_alt2, vi_alt3
Example:
pinctrl@70000000 {
......
Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
View file @ dccfd1e4
ST Ericsson Nomadik pinmux controller
Required properties:
- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540",
"stericsson,nmk-pinctrl-stn8815"
- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
"stericsson,stn8815-pinctrl"
- reg: Should contain the register physical address and length of the PRCMU.
Please refer to pinctrl-bindings.txt in this directory for details of the
......@@ -68,7 +68,7 @@ Optional subnode-properties:
Example board file extract:
pinctrl@80157000 {
compatible = "stericsson,nmk-pinctrl";
compatible = "stericsson,db8500-pinctrl";
reg = <0x80157000 0x2000>;
pinctrl-names = "default";
......
Documentation/devicetree/bindings/rtc/dw-apb.txt
View file @ dccfd1e4
* Designware APB timer
Required properties:
- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc"
- compatible: One of:
"snps,dw-apb-timer"
"snps,dw-apb-timer-sp" <DEPRECATED>
"snps,dw-apb-timer-osc" <DEPRECATED>
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: IRQ line for the timer.
......@@ -20,23 +23,8 @@ systems may use one.
Example:
timer1: timer@ffc09000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 168 4>;
clock-frequency = <200000000>;
reg = <0xffc09000 0x1000>;
};
timer2: timer@ffd00000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 169 4>;
clock-frequency = <200000000>;
reg = <0xffd00000 0x1000>;
};
timer3: timer@ffe00000 {
compatible = "snps,dw-apb-timer-osc";
timer@ffe00000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 170 4>;
reg = <0xffe00000 0x1000>;
clocks = <&timer_clk>, <&timer_pclk>;
......
Documentation/devicetree/bindings/serial/altera_jtaguart.txt
View file @ dccfd1e4
Altera JTAG UART
Required properties:
- compatible : should be "ALTR,juart-1.0"
- compatible : should be "ALTR,juart-1.0" <DEPRECATED>
- compatible : should be "altr,juart-1.0"
Documentation/devicetree/bindings/serial/altera_uart.txt
View file @ dccfd1e4
Altera UART
Required properties:
- compatible : should be "ALTR,uart-1.0"
- compatible : should be "ALTR,uart-1.0" <DEPRECATED>
- compatible : should be "altr,uart-1.0"
Optional properties:
- clock-frequency : frequency of the clock input to the UART
Documentation/devicetree/bindings/serio/altera_ps2.txt
View file @ dccfd1e4
Altera UP PS/2 controller
Required properties:
- compatible : should be "ALTR,ps2-1.0".
- compatible : should be "ALTR,ps2-1.0". <DEPRECATED>
- compatible : should be "altr,ps2-1.0".
Documentation/devicetree/bindings/spi/spi_altera.txt
View file @ dccfd1e4
Altera SPI
Required properties:
- compatible : should be "ALTR,spi-1.0".
- compatible : should be "ALTR,spi-1.0". <DEPRECATED>
- compatible : should be "altr,spi-1.0".
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ dccfd1e4
......@@ -7,6 +7,7 @@ ad Avionic Design GmbH
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
......
arch/arm/Makefile
View file @ dccfd1e4
......@@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
......
arch/arm/boot/dts/Makefile
View file @ dccfd1e4
......@@ -42,7 +42,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
bcm28155-ap.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
......@@ -53,13 +54,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \
exynos4412-odroidx.dtb \
exynos4412-smdk4412.dtb \
exynos4412-origen.dtb \
exynos4412-smdk4412.dtb \
exynos4412-trats2.dtb \
exynos5250-arndale.dtb \
exynos5440-sd5v1.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5420-smdk5420.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
......@@ -143,7 +145,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-cfa10055.dtb \
imx28-cfa10056.dtb \
imx28-cfa10057.dtb \
imx28-cfa10058.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
......@@ -176,13 +180,14 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am43x-epos-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
hrefprev60.dtb \
hrefv60plus.dtb \
ccu8540.dtb \
ccu9540.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60.dtb \
ste-hrefv60plus.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
emev2-kzm9d-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7740-armadillo800eva-reference.dtb \
......@@ -192,6 +197,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
......@@ -206,11 +212,14 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2020.dtb
dtb-$(CONFIG_ARCH_SUNXI) += \
sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb
sun5i-a13-olinuxino.dtb \
sun6i-a31-colombus.dtb \
sun7i-a20-olinuxino-micro.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
......@@ -224,8 +233,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra114-pluto.dtb
tegra114-dalmore.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
......
arch/arm/boot/dts/at91rm9200.dtsi
View file @ dccfd1e4
......@@ -120,6 +120,7 @@ mmc0: mmc@fffb4000 {
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
status = "disabled";
};
......
arch/arm/boot/dts/at91rm9200_pqfp.dtsi 0 → 100644
View file @ dccfd1e4
/*
* at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
*
* Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2 or later.
*/
#include "at91rm9200.dtsi"
/ {
compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
};
&pioD {
status = "disabled";
};
arch/arm/boot/dts/at91sam9260.dtsi
View file @ dccfd1e4
......@@ -572,6 +572,7 @@ mmc0: mmc@fffa8000 {
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
status = "disabled";
};
......
arch/arm/boot/dts/at91sam9n12.dtsi
View file @ dccfd1e4
......@@ -291,6 +291,22 @@ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */
};
};
i2c0 {
pinctrl_i2c0: i2c0-0 {
atmel,pins =
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
i2c1 {
pinctrl_i2c1: i2c1-0 {
atmel,pins =
<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
};
};
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
......@@ -471,6 +487,8 @@ i2c0: i2c@f8010000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
status = "disabled";
};
......@@ -483,6 +501,8 @@ i2c1: i2c@f8014000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "disabled";
};
......
arch/arm/boot/dts/at91sam9n12ek.dts
View file @ dccfd1e4
......@@ -40,6 +40,15 @@ dbgu: serial@fffff200 {
i2c0: i2c@f8010000 {
status = "okay";
qt1070: keyboard@1b {
compatible = "qt1070";
reg = <0x1b>;
interrupt-parent = <&pioA>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qt1070_irq>;
};
};
i2c1: i2c@f8014000 {
......@@ -66,6 +75,13 @@ pinctrl_board_mmc0: mmc0-board {
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */
};
};
qt1070 {
pinctrl_qt1070_irq: qt1070_irq {
atmel,pins =
<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
};
};
spi0: spi@f0000000 {
......@@ -121,7 +137,7 @@ gpio_keys {
enter {
label = "Enter";
gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
};
......
arch/arm/boot/dts/at91sam9x5.dtsi
View file @ dccfd1e4
......@@ -542,6 +542,9 @@ ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
<&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
......
arch/arm/boot/dts/at91sam9x5ek.dtsi
View file @ dccfd1e4
......@@ -59,6 +59,11 @@ usb2: gadget@f803c000 {
i2c0: i2c@f8010000 {
status = "okay";
wm8731: wm8731@1a {
compatible = "wm8731";
reg = <0x1a>;
};
};
pinctrl@fffff400 {
......@@ -90,6 +95,10 @@ m25p80@0 {
watchdog@fffffe40 {
status = "okay";
};
ssc0: ssc@f0010000 {
status = "okay";
};
};
usb0: ohci@00600000 {
......@@ -105,4 +114,19 @@ usb1: ehci@00700000 {
status = "okay";
};
};
sound {
compatible = "atmel,sam9x5-wm8731-audio";
atmel,model = "wm8731 @ AT91SAM9X5EK";
atmel,audio-routing =
"Headphone Jack", "RHPOUT",
"Headphone Jack", "LHPOUT",
"LLINEIN", "Line In Jack",
"RLINEIN", "Line In Jack";
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8731>;
};
};
arch/arm/boot/dts/bcm11351-brt.dts
View file @ dccfd1e4
......@@ -17,7 +17,7 @@
/ {
model = "BCM11351 BRT board";
compatible = "bcm,bcm11351-brt", "bcm,bcm11351";
compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
memory {
reg = <0x80000000 0x40000000>; /* 1 GB */
......@@ -27,18 +27,18 @@ uart@3e000000 {
status = "okay";
};
sdio0: sdio@0x3f180000 {
sdio1: sdio@3f180000 {
max-frequency = <48000000>;
status = "okay";
};
sdio1: sdio@0x3f190000 {
sdio2: sdio@3f190000 {
non-removable;
max-frequency = <48000000>;
status = "okay";
};
sdio3: sdio@0x3f1b0000 {
sdio4: sdio@3f1b0000 {
max-frequency = <48000000>;
status = "okay";
};
......
arch/arm/boot/dts/bcm11351.dtsi
View file @ dccfd1e4
/*
* Copyright (C) 2012 Broadcom Corporation
* Copyright (C) 2012-2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -18,7 +18,7 @@
/ {
model = "BCM11351 SoC";
compatible = "bcm,bcm11351";
compatible = "brcm,bcm11351";
interrupt-parent = <&gic>;
chosen {
......@@ -35,12 +35,12 @@ gic: interrupt-controller@3ff00100 {
};
smc@0x3404c000 {
compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
};
uart@3e000000 {
compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e000000 0x1000>;
clock-frequency = <13000000>;
......@@ -50,42 +50,47 @@ uart@3e000000 {
};
L2: l2-cache {
compatible = "bcm,bcm11351-a2-pl310-cache";
compatible = "brcm,bcm11351-a2-pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
cache-level = <2>;
};
watchdog@35002f40 {
compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
reg = <0x35002f40 0x6c>;
};
timer@35006000 {
compatible = "bcm,kona-timer";
compatible = "brcm,kona-timer";
reg = <0x35006000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <32768>;
};
sdio0: sdio@0x3f180000 {
compatible = "bcm,kona-sdhci";
sdio1: sdio@3f180000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f180000 0x10000>;
interrupts = <0x0 77 0x4>;
status = "disabled";
};
sdio1: sdio@0x3f190000 {
compatible = "bcm,kona-sdhci";
sdio2: sdio@3f190000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f190000 0x10000>;
interrupts = <0x0 76 0x4>;
status = "disabled";
};
sdio2: sdio@0x3f1a0000 {
compatible = "bcm,kona-sdhci";
sdio3: sdio@3f1a0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
interrupts = <0x0 74 0x4>;
status = "disabled";
};
sdio3: sdio@0x3f1b0000 {
compatible = "bcm,kona-sdhci";
sdio4: sdio@3f1b0000 {
compatible = "brcm,kona-sdhci";
reg = <0x3f1b0000 0x10000>;
interrupts = <0x0 73 0x4>;
status = "disabled";
......
arch/arm/boot/dts/bcm28155-ap.dts 0 → 100644
View file @ dccfd1e4
/*
* Copyright (C) 2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "bcm11351.dtsi"
/ {
model = "BCM28155 AP board";
compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
memory {
reg = <0x80000000 0x40000000>; /* 1 GB */
};
uart@3e000000 {
status = "okay";
};
sdio1: sdio@3f180000 {
max-frequency = <48000000>;
status = "okay";
};
sdio2: sdio@3f190000 {
non-removable;
max-frequency = <48000000>;
status = "okay";
};
sdio4: sdio@3f1b0000 {
max-frequency = <48000000>;
status = "okay";
};
};
arch/arm/boot/dts/emev2-kzm9d-reference.dts 0 → 100644
View file @ dccfd1e4
/*
* Device Tree Source for the KZM9D board
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "emev2.dtsi"
/ {
model = "EMEV2 KZM9D Board";
compatible = "renesas,kzm9d-reference", "renesas,emev2";
memory {
device_type = "memory";
reg = <0x40000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
reg_1p8v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
lan9220@20000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x20000000 0x10000>;
phy-mode = "mii";
interrupt-parent = <&gpio0>;
interrupts = <1 1>; /* active high */
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vddvario-supply = <&reg_1p8v>;
vdd33a-supply = <&reg_3p3v>;
};
};
arch/arm/boot/dts/emev2-kzm9d.dts
View file @ dccfd1e4
......@@ -21,6 +21,6 @@ memory {
};
chosen {
bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
};
arch/arm/boot/dts/emev2.dtsi
View file @ dccfd1e4
......@@ -14,6 +14,14 @@ / {
compatible = "renesas,emev2";
interrupt-parent = <&gic>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......@@ -67,4 +75,55 @@ uart@e1050000 {
reg = <0xe1050000 0x38>;
interrupts = <0 11 0>;
};
gpio0: gpio@e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
interrupts = <0 67 0>, <0 68 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
interrupts = <0 69 0>, <0 70 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
interrupts = <0 71 0>, <0 72 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
interrupts = <0 73 0>, <0 74 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
interrupts = <0 75 0>, <0 76 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <31>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
arch/arm/boot/dts/exynos4.dtsi
View file @ dccfd1e4
......@@ -36,6 +36,12 @@ aliases {
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
csis0 = &csis_0;
csis1 = &csis_1;
fimc0 = &fimc_0;
fimc1 = &fimc_1;
fimc2 = &fimc_2;
fimc3 = &fimc_3;
};
chipid@10000000 {
......@@ -92,6 +98,88 @@ sys_reg: sysreg {
reg = <0x10010000 0x400>;
};
camera {
compatible = "samsung,fimc", "simple-bus";
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clock_cam: clock-controller {
#clock-cells = <1>;
};
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
interrupts = <0 84 0>;
clocks = <&clock 256>, <&clock 128>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
fimc_1: fimc@11810000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
interrupts = <0 85 0>;
clocks = <&clock 257>, <&clock 129>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
fimc_2: fimc@11820000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
interrupts = <0 86 0>;
clocks = <&clock 258>, <&clock 130>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
fimc_3: fimc@11830000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
interrupts = <0 87 0>;
clocks = <&clock 259>, <&clock 131>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
csis_0: csis@11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
interrupts = <0 78 0>;
clocks = <&clock 260>, <&clock 134>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
samsung,power-domain = <&pd_cam>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
csis_1: csis@11890000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
interrupts = <0 80 0>;
clocks = <&clock 261>, <&clock 135>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
samsung,power-domain = <&pd_cam>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
......@@ -155,13 +243,31 @@ sdhci@12540000 {
status = "disabled";
};
ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
interrupts = <0 70 0>;
clocks = <&clock 304>;
clock-names = "usbhost";
status = "disabled";
};
ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
interrupts = <0 70 0>;
clocks = <&clock 304>;
clock-names = "usbhost";
status = "disabled";
};
mfc: codec@13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
clocks = <&clock 170>, <&clock 273>;
clock-names = "sclk_mfc", "mfc";
clocks = <&clock 273>;
clock-names = "mfc";
status = "disabled";
};
......@@ -297,8 +403,8 @@ spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 7>; /* preliminary */
rx-dma-channel = <&pdma0 6>; /* preliminary */
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 327>, <&clock 159>;
......@@ -312,8 +418,8 @@ spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
interrupts = <0 67 0>;
tx-dma-channel = <&pdma1 7>; /* preliminary */
rx-dma-channel = <&pdma1 6>; /* preliminary */
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 328>, <&clock 160>;
......@@ -327,8 +433,8 @@ spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
interrupts = <0 68 0>;
tx-dma-channel = <&pdma0 9>; /* preliminary */
rx-dma-channel = <&pdma0 8>; /* preliminary */
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 329>, <&clock 161>;
......
arch/arm/boot/dts/exynos4210-pinctrl.dtsi
View file @ dccfd1e4
......@@ -797,6 +797,29 @@ eint31: ext-int31 {
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
cam_port_a_io: cam-port-a-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
cam_port_a_clk_active: cam-port-a-clk-active {
samsung,pins = "gpj1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle {
samsung,pins = "gpj1-3";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
};
pinctrl@03860000 {
......
arch/arm/boot/dts/exynos4210-trats.dts
View file @ dccfd1e4
......@@ -30,7 +30,10 @@ chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
vemmc_reg: voltage-regulator@0 {
regulators {
compatible = "simple-bus";
vemmc_reg: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
......@@ -39,6 +42,52 @@ vemmc_reg: voltage-regulator@0 {
enable-active-high;
};
tsp_reg: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpl0 3 0>;
enable-active-high;
};
cam_af_28v_reg: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpk1 1 0>;
enable-active-high;
};
cam_io_en_reg: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpe2 1 0>;
enable-active-high;
};
cam_io_12v_reg: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&gpe2 5 0>;
enable-active-high;
};
vt_core_15v_reg: regulator-5 {
compatible = "regulator-fixed";
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
gpio = <&gpe2 2 0>;
enable-active-high;
};
};
sdhci_emmc: sdhci@12510000 {
bus-width = <8>;
non-removable;
......@@ -97,15 +146,6 @@ ok-key {
};
};
tsp_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpl0 3 0>;
enable-active-high;
};
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
......@@ -218,6 +258,12 @@ vpll_reg: LDO10 {
regulator-always-on;
};
vtcam_reg: LDO12 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcclcd_reg: LDO13 {
regulator-name = "VCC_3.3V_LCD";
regulator-min-microvolt = <3300000>;
......@@ -301,4 +347,26 @@ xusbxti {
clock-frequency = <24000000>;
};
};
camera {
pinctrl-names = "default";
pinctrl-0 = <>;
status = "okay";
fimc_0: fimc@11800000 {
status = "okay";
};
fimc_1: fimc@11810000 {
status = "okay";
};
fimc_2: fimc@11820000 {
status = "okay";
};
fimc_3: fimc@11830000 {
status = "okay";
};
};
};
arch/arm/boot/dts/exynos4210.dtsi
View file @ dccfd1e4
......@@ -125,4 +125,34 @@ g2d@12800000 {
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
camera {
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 {
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,cam-if;
};
fimc_1: fimc@11810000 {
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,cam-if;
};
fimc_2: fimc@11820000 {
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,lcd-wb;
};
fimc_3: fimc@11830000 {
samsung,pix-limits = <1920 8192 1366 1920>;
samsung,rotators = <0>;
samsung,mainscaler-ext;
samsung,lcd-wb;
};
};
};
arch/arm/boot/dts/exynos4412-origen.dts
View file @ dccfd1e4
......@@ -27,6 +27,11 @@ chosen {
bootargs ="console=ttySAC2,115200";
};
firmware@0203F000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
mmc_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
......
arch/arm/boot/dts/exynos4412-trats2.dts 0 → 100644
View file @ dccfd1e4
/*
* Samsung's Exynos4412 based Trats 2 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Device tree source file for Samsung's Trats 2 board which is based on
* Samsung's Exynos4412 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos4412.dtsi"
/ {
model = "Samsung Trats 2 based on Exynos4412";
compatible = "samsung,trats2", "samsung,exynos4412";
aliases {
i2c8 = &i2c_ak8975;
};
memory {
reg = <0x40000000 0x40000000>;
};
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
firmware@0204F000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti", "fixed-clock";
clock-frequency = <0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti", "fixed-clock";
clock-frequency = <24000000>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vemmc_reg: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpk0 2 0>;
enable-active-high;
};
cam_io_reg: voltage-regulator-1 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpm0 2 0>;
enable-active-high;
};
/* More to come */
};
gpio-keys {
compatible = "gpio-keys";
key-down {
interrupt-parent = <&gpj1>;
interrupts = <2 0>;
gpios = <&gpj1 2 1>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
key-up {
interrupt-parent = <&gpj1>;
interrupts = <1 0>;
gpios = <&gpj1 1 1>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
key-power {
interrupt-parent = <&gpx2>;
interrupts = <7 0>;
gpios = <&gpx2 7 1>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
gpio-key,wakeup;
};
};
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <400000>;
pinctrl-0 = <&i2c3_bus>;
pinctrl-names = "default";
status = "okay";
mms114-touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpm2>;
interrupts = <3 2>;
x-size = <720>;
y-size = <1280>;
avdd-supply = <&ldo23_reg>;
vdd-supply = <&ldo24_reg>;
};
};
i2c@138D0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <100000>;
pinctrl-0 = <&i2c7_bus>;
pinctrl-names = "default";
status = "okay";
max77686_pmic@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 0>;
reg = <0x09>;
voltage-regulators {
ldo1_reg: ldo1 {
regulator-compatible = "LDO1";
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-mem-on;
};
ldo2_reg: ldo2 {
regulator-compatible = "LDO2";
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-mem-on;
};
ldo3_reg: ldo3 {
regulator-compatible = "LDO3";
regulator-name = "VCC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-mem-on;
};
ldo4_reg: ldo4 {
regulator-compatible = "LDO4";
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-mem-on;
};
ldo5_reg: ldo5 {
regulator-compatible = "LDO5";
regulator-name = "VCC_1.8V_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-mem-on;
};
ldo6_reg: ldo6 {
regulator-compatible = "LDO6";
regulator-name = "VMPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-mem-on;
};
ldo7_reg: ldo7 {
regulator-compatible = "LDO7";
regulator-name = "VPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-mem-on;
};
ldo8_reg: ldo8 {
regulator-compatible = "LDO8";
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-mem-off;
};
ldo9_reg: ldo9 {
regulator-compatible = "LDO9";
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-mem-idle;
};
ldo10_reg: ldo10 {
regulator-compatible = "LDO10";
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-off;
};
ldo11_reg: ldo11 {
regulator-compatible = "LDO11";
regulator-name = "VABB1_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
regulator-mem-off;
};
ldo12_reg: ldo12 {
regulator-compatible = "LDO12";
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-mem-off;
};
ldo13_reg: ldo13 {
regulator-compatible = "LDO13";
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo14_reg: ldo14 {
regulator-compatible = "LDO14";
regulator-name = "VABB2_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
regulator-mem-off;
};
ldo15_reg: ldo15 {
regulator-compatible = "LDO15";
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-mem-off;
};
ldo16_reg: ldo16 {
regulator-compatible = "LDO16";
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-off;
};
ldo17_reg: ldo17 {
regulator-compatible = "LDO17";
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-mem-idle;
};
ldo18_reg: ldo18 {
regulator-compatible = "LDO18";
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo19_reg: ldo19 {
regulator-compatible = "LDO19";
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo20_reg: ldo20 {
regulator-compatible = "LDO20";
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo21_reg: ldo21 {
regulator-compatible = "LDO21";
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-mem-idle;
};
ldo22_reg: ldo22 {
regulator-compatible = "LDO22";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-mem-off;
};
ldo23_reg: ldo23 {
regulator-compatible = "LDO23";
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-mem-idle;
};
ldo24_reg: ldo24 {
regulator-compatible = "LDO24";
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo25_reg: ldo25 {
regulator-compatible = "LDO25";
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-mem-idle;
};
ldo26_reg: ldo26 {
regulator-compatible = "LDO26";
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-mem-idle;
};
buck1_reg: buck1 {
regulator-compatible = "BUCK1";
regulator-name = "vdd_mif";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
regulator-mem-off;
};
buck2_reg: buck2 {
regulator-compatible = "BUCK2";
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-mem-off;
};
buck3_reg: buck3 {
regulator-compatible = "BUCK3";
regulator-name = "vdd_int";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
regulator-mem-off;
};
buck4_reg: buck4 {
regulator-compatible = "BUCK4";
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-mem-off;
};
buck5_reg: buck5 {
regulator-compatible = "BUCK5";
regulator-name = "VMEM_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
buck6_reg: buck6 {
regulator-compatible = "BUCK6";
regulator-name = "VCC_SUB_1.35V";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
buck7_reg: buck7 {
regulator-compatible = "BUCK7";
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
buck8_reg: buck8 {
regulator-compatible = "BUCK8";
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-mem-off;
};
buck9_reg: buck9 {
regulator-compatible = "BUCK9";
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
regulator-mem-off;
};
};
};
};
sdhci@12510000 {
bus-width = <8>;
non-removable;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
pinctrl-names = "default";
vmmc-supply = <&vemmc_reg>;
status = "okay";
};
serial@13800000 {
status = "okay";
};
serial@13810000 {
status = "okay";
};
serial@13820000 {
status = "okay";
};
serial@13830000 {
status = "okay";
};
i2c_ak8975: i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&gpy2 4 0>, <&gpy2 5 0>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ak8975@0c {
compatible = "ak,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 0>;
};
};
spi_1: spi@13930000 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
status = "okay";
s5c73m3_spi: s5c73m3 {
compatible = "samsung,s5c73m3";
spi-max-frequency = <50000000>;
reg = <0>;
controller-data {
cs-gpio = <&gpb 5 0>;
samsung,spi-feedback-delay = <2>;
};
};
};
camera {
pinctrl-0 = <&cam_port_b_clk_active>;
pinctrl-names = "default";
status = "okay";
fimc_0: fimc@11800000 {
status = "okay";
};
fimc_1: fimc@11810000 {
status = "okay";
};
fimc_2: fimc@11820000 {
status = "okay";
};
fimc_3: fimc@11830000 {
status = "okay";
};
csis_1: csis@11890000 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
clock-frequency = <160000000>;
status = "okay";
/* Camera D (4) MIPI CSI-2 (CSIS1) */
port@4 {
reg = <4>;
csis1_ep: endpoint {
remote-endpoint = <&is_s5k6a3_ep>;
data-lanes = <1>;
samsung,csis-hs-settle = <18>;
samsung,csis-wclk;
};
};
};
fimc_lite_0: fimc-lite@12390000 {
status = "okay";
};
fimc_lite_1: fimc-lite@123A0000 {
status = "okay";
};
fimc-is@12000000 {
pinctrl-0 = <&fimc_is_uart>;
pinctrl-names = "default";
status = "okay";
i2c1_isp: i2c-isp@12140000 {
pinctrl-0 = <&fimc_is_i2c1>;
pinctrl-names = "default";
s5k6a3@10 {
compatible = "samsung,s5k6a3";
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
svddio-supply = <&ldo19_reg>;
clock-frequency = <24000000>;
/* CAM_B_CLKOUT */
clocks = <&clock_cam 1>;
clock-names = "mclk";
samsung,camclk-out = <1>;
gpios = <&gpm1 6 0>;
port {
is_s5k6a3_ep: endpoint {
remote-endpoint = <&csis1_ep>;
data-lanes = <1>;
};
};
};
};
};
};
};
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
View file @ dccfd1e4
......@@ -401,13 +401,26 @@ lcd_ldi: lcd-ldi {
samsung,pin-drv = <0>;
};
cam_port_a: cam-port-a {
cam_port_a_io: cam-port-a-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
"gpj1-4";
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
cam_port_a_clk_active: cam-port-a-clk-active {
samsung,pins = "gpj1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle {
samsung,pins = "gpj1-3";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
};
......@@ -778,16 +791,29 @@ sd3_bus4: sd3-bus-width4 {
samsung,pin-drv = <3>;
};
cam_port_b: cam-port-b {
cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
"gpm2-2";
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
cam_port_b_clk_active: cam-port-b-clk-active {
samsung,pins = "gpm2-2";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle {
samsung,pins = "gpm2-2";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
eint0: ext-int0 {
samsung,pins = "gpx0-0";
samsung,pin-function = <0xf>;
......@@ -822,6 +848,27 @@ eint31: ext-int31 {
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_i2c0: fimc-is-i2c0 {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_i2c1: fimc-is-i2c1 {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_uart: fimc-is-uart {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
pinctrl@03860000 {
......
arch/arm/boot/dts/exynos4x12.dtsi
View file @ dccfd1e4
......@@ -26,6 +26,13 @@ aliases {
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
fimc-lite0 = &fimc_lite_0;
fimc-lite1 = &fimc_lite_1;
};
pd_isp: isp-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
};
clock: clock-controller@10030000 {
......@@ -73,4 +80,100 @@ g2d@10800000 {
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
camera {
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4212-fimc";
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,isp-wb;
samsung,cam-if;
};
fimc_1: fimc@11810000 {
compatible = "samsung,exynos4212-fimc";
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,isp-wb;
samsung,cam-if;
};
fimc_2: fimc@11820000 {
compatible = "samsung,exynos4212-fimc";
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,isp-wb;
samsung,lcd-wb;
samsung,cam-if;
};
fimc_3: fimc@11830000 {
compatible = "samsung,exynos4212-fimc";
samsung,pix-limits = <1920 8192 1366 1920>;
samsung,rotators = <0>;
samsung,mainscaler-ext;
samsung,isp-wb;
samsung,lcd-wb;
};
fimc_lite_0: fimc-lite@12390000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
interrupts = <0 105 0>;
samsung,power-domain = <&pd_isp>;
clocks = <&clock 353>;
clock-names = "flite";
status = "disabled";
};
fimc_lite_1: fimc-lite@123A0000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x123A0000 0x1000>;
interrupts = <0 106 0>;
samsung,power-domain = <&pd_isp>;
clocks = <&clock 354>;
clock-names = "flite";
status = "disabled";
};
fimc_is: fimc-is@12000000 {
compatible = "samsung,exynos4212-fimc-is", "simple-bus";
reg = <0x12000000 0x260000>;
interrupts = <0 90 0>, <0 95 0>;
samsung,power-domain = <&pd_isp>;
clocks = <&clock 353>, <&clock 354>, <&clock 355>,
<&clock 356>, <&clock 17>, <&clock 357>,
<&clock 358>, <&clock 359>, <&clock 360>,
<&clock 450>,<&clock 451>, <&clock 452>,
<&clock 453>, <&clock 176>, <&clock 13>,
<&clock 454>, <&clock 395>, <&clock 455>;
clock-names = "lite0", "lite1", "ppmuispx",
"ppmuispmx", "mpll", "isp",
"drc", "fd", "mcuisp",
"ispdiv0", "ispdiv1", "mcuispdiv0",
"mcuispdiv1", "uart", "aclk200",
"div_aclk200", "aclk400mcuisp",
"div_aclk400mcuisp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
pmu {
reg = <0x10020000 0x3000>;
};
i2c1_isp: i2c-isp@12140000 {
compatible = "samsung,exynos4212-i2c-isp";
reg = <0x12140000 0x100>;
clocks = <&clock 370>;
clock-names = "i2c_isp";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
};
arch/arm/boot/dts/exynos5.dtsi
View file @ dccfd1e4
......@@ -108,4 +108,23 @@ watchdog {
interrupts = <0 42 0>;
status = "disabled";
};
fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
reg = <0x14400000 0x40000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <18 4>, <18 5>, <18 6>;
status = "disabled";
};
dp-controller@145B0000 {
compatible = "samsung,exynos5-dp";
reg = <0x145B0000 0x1000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
arch/arm/boot/dts/exynos5250-arndale.dts
View file @ dccfd1e4
......@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos5250.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
......@@ -37,6 +38,28 @@ i2c@12C60000 {
s5m8767_pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
vinb3-supply = <&main_dc_reg>;
vinb4-supply = <&main_dc_reg>;
vinb5-supply = <&main_dc_reg>;
vinb6-supply = <&main_dc_reg>;
vinb7-supply = <&main_dc_reg>;
vinb8-supply = <&main_dc_reg>;
vinb9-supply = <&main_dc_reg>;
vinl1-supply = <&buck7_reg>;
vinl2-supply = <&buck7_reg>;
vinl3-supply = <&buck7_reg>;
vinl4-supply = <&main_dc_reg>;
vinl5-supply = <&main_dc_reg>;
vinl6-supply = <&main_dc_reg>;
vinl7-supply = <&main_dc_reg>;
vinl8-supply = <&buck8_reg>;
vinl9-supply = <&buck8_reg>;
s5m8767,pmic-buck2-dvs-voltage = <1300000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>;
......@@ -276,6 +299,16 @@ buck5_reg: BUCK5 {
op_mode = <1>;
};
buck7_reg: BUCK7 {
regulator-name = "PVDD_BUCK7";
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "PVDD_BUCK8";
regulator-always-on;
};
buck9_reg: BUCK9 {
regulator-name = "VDD_33_OFF_EXT1";
regulator-min-microvolt = <750000>;
......@@ -295,7 +328,22 @@ i2c@12C80000 {
};
i2c@12C90000 {
status = "disabled";
wm1811a@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
AVDD2-supply = <&main_dc_reg>;
CPVDD-supply = <&main_dc_reg>;
DBVDD1-supply = <&main_dc_reg>;
DBVDD2-supply = <&main_dc_reg>;
DBVDD3-supply = <&main_dc_reg>;
LDO1VDD-supply = <&main_dc_reg>;
SPKVDD1-supply = <&main_dc_reg>;
SPKVDD2-supply = <&main_dc_reg>;
wlf,ldo1ena = <&gpb0 0 0>;
wlf,ldo2ena = <&gpb0 1 0>;
};
};
i2c@12CA0000 {
......@@ -429,6 +477,16 @@ hdmi {
vdd-supply = <&ldo8_reg>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
main_dc_reg: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "MAIN_DC";
};
mmc_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "VDD_33ON_2.8V";
......@@ -442,6 +500,7 @@ reg_hdmi_en: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "hdmi-en";
};
};
fixed-rate-clocks {
xxti {
......@@ -450,16 +509,18 @@ xxti {
};
};
dp-controller {
dp-controller@145B0000 {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
status = "okay";
};
fimd: fimd@14400000 {
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
......@@ -480,4 +541,22 @@ timing0: timing@0 {
rtc {
status = "okay";
};
usb_hub_bus {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
// SMSC USB3503 connected in hardware only mode as a PHY
usb_hub: usb_hub {
compatible = "smsc,usb3503a";
reset-gpios = <&gpx3 5 1>;
connect-gpios = <&gpd1 7 1>;
};
};
usb@12110000 {
usb-phy = <&usb2_phy>;
};
};
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file @ dccfd1e4
......@@ -250,7 +250,7 @@ usb@12110000 {
samsung,vbus-gpio = <&gpx2 6 0>;
};
dp-controller {
dp-controller@145B0000 {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
......@@ -260,8 +260,11 @@ dp-controller {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
status = "okay";
};
fimd@14400000 {
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
......@@ -277,6 +280,7 @@ timing0: timing@0 {
vsync-len = <4>;
};
};
};
fixed-rate-clocks {
xxti {
......
arch/arm/boot/dts/exynos5250.dtsi
View file @ dccfd1e4
......@@ -163,11 +163,21 @@ watchdog {
clock-names = "watchdog";
};
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
interrupts = <0 91 0>;
clocks = <&clock 345>;
clock-names = "fimg2d";
};
codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
samsung,power-domain = <&pd_mfc>;
clocks = <&clock 266>;
clock-names = "mfc";
};
rtc {
......@@ -611,28 +621,20 @@ mixer {
interrupts = <0 94 0>;
};
dp-controller {
compatible = "samsung,exynos5-dp";
reg = <0x145b0000 0x1000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
dp_phy: video-phy@10040720 {
compatible = "samsung,exynos5250-dp-video-phy";
reg = <0x10040720 4>;
#phy-cells = <0>;
};
dp-controller@145B0000 {
clocks = <&clock 342>;
clock-names = "dp";
#address-cells = <1>;
#size-cells = <0>;
dptx-phy {
reg = <0x10040720>;
samsung,enable-mask = <1>;
};
phys = <&dp_phy>;
phy-names = "dp";
};
fimd {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
reg = <0x14400000 0x40000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <18 4>, <18 5>, <18 6>;
fimd@14400000 {
clocks = <&clock 133>, <&clock 339>;
clock-names = "sclk_fimd", "fimd";
};
......
arch/arm/boot/dts/exynos5420-pinctrl.dtsi
View file @ dccfd1e4
......@@ -59,6 +59,13 @@ gpx3: gpx3 {
interrupt-controller;
#interrupt-cells = <2>;
};
dp_hpd: dp_hpd {
samsung,pins = "gpx0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
};
pinctrl@13410000 {
......
arch/arm/boot/dts/exynos5420-smdk5420.dts
View file @ dccfd1e4
......@@ -30,4 +30,35 @@ oscclk {
clock-frequency = <24000000>;
};
};
dp-controller@145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
status = "okay";
};
fimd@14400000 {
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
clock-frequency = <50000>;
hactive = <2560>;
vactive = <1600>;
hfront-porch = <48>;
hback-porch = <80>;
hsync-len = <32>;
vback-porch = <16>;
vfront-porch = <8>;
vsync-len = <6>;
};
};
};
};
arch/arm/boot/dts/exynos5420.dtsi
View file @ dccfd1e4
......@@ -14,7 +14,10 @@
*/
#include "exynos5.dtsi"
/include/ "exynos5420-pinctrl.dtsi"
#include "exynos5420-pinctrl.dtsi"
#include <dt-bindings/clk/exynos-audss-clk.h>
/ {
compatible = "samsung,exynos5420";
......@@ -65,6 +68,22 @@ clock: clock-controller@10010000 {
#clock-cells = <1>;
};
clock_audss: audss-clock-controller@3810000 {
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock 148>;
clock-names = "sclk_audio";
};
codec@11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
clocks = <&clock 401>;
clock-names = "mfc";
};
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
......@@ -90,6 +109,41 @@ mct_map: mct-map {
};
};
gsc_pd: power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
};
isp_pd: power-domain@10044020 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044020 0x20>;
};
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
};
disp_pd: power-domain@100440C0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440C0 0x20>;
};
mau_pd: power-domain@100440E0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440E0 0x20>;
};
g2d_pd: power-domain@10044100 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044100 0x20>;
};
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
};
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
......@@ -145,4 +199,23 @@ serial@12C30000 {
clocks = <&clock 260>, <&clock 131>;
clock-names = "uart", "clk_uart_baud0";
};
dp_phy: video-phy@10040728 {
compatible = "samsung,exynos5250-dp-video-phy";
reg = <0x10040728 4>;
#phy-cells = <0>;
};
dp-controller@145B0000 {
clocks = <&clock 412>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
fimd@14400000 {
samsung,power-domain = <&disp_pd>;
clocks = <&clock 147>, <&clock 421>;
clock-names = "sclk_fimd", "fimd";
};
};
arch/arm/boot/dts/exynos5440.dtsi
View file @ dccfd1e4
......@@ -18,6 +18,9 @@ / {
aliases {
spi0 = &spi_0;
tmuctrl0 = &tmuctrl_0;
tmuctrl1 = &tmuctrl_1;
tmuctrl2 = &tmuctrl_2;
};
clock: clock-controller@160000 {
......@@ -207,6 +210,30 @@ rtc {
clock-names = "rtc";
};
tmuctrl_0: tmuctrl@160118 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
clocks = <&clock 21>;
clock-names = "tmu_apbif";
};
tmuctrl_1: tmuctrl@16011C {
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
clocks = <&clock 21>;
clock-names = "tmu_apbif";
};
tmuctrl_2: tmuctrl@160120 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
clocks = <&clock 21>;
clock-names = "tmu_apbif";
};
sata@210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
......
arch/arm/boot/dts/imx23-evk.dts
View file @ dccfd1e4
......@@ -90,6 +90,11 @@ timing0: timing0 {
};
apbx@80040000 {
lradc@80050000 {
status = "okay";
fsl,lradc-touchscreen-wires = <4>;
};
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pins_a>;
......@@ -107,6 +112,16 @@ duart: serial@80070000 {
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
usbphy0: usbphy@8007c000 {
status = "okay";
};
};
};
ahb@80080000 {
usb0: usb@80080000 {
status = "okay";
};
};
......
arch/arm/boot/dts/imx23-olinuxino.dts
View file @ dccfd1e4
......@@ -69,6 +69,10 @@ ssp1: ssp@80034000 {
};
apbx@80040000 {
lradc@80050000 {
status = "okay";
};
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
......
arch/arm/boot/dts/imx23.dtsi
View file @ dccfd1e4
......@@ -20,6 +20,8 @@ aliases {
gpio2 = &gpio2;
serial0 = &auart0;
serial1 = &auart1;
spi0 = &ssp0;
spi1 = &ssp1;
};
cpus {
......@@ -76,23 +78,21 @@ gpmi-nand@8000c000 {
#size-cells = <1>;
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
interrupts = <56>;
interrupt-names = "bch";
clocks = <&clks 34>;
clock-names = "gpmi_io";
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
ssp0: ssp@80010000 {
reg = <0x80010000 0x2000>;
interrupts = <15 14>;
interrupts = <15>;
clocks = <&clks 33>;
dmas = <&dma_apbh 1>;
dma-names = "rx-tx";
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
......@@ -366,11 +366,10 @@ lcdif@80030000 {
ssp1: ssp@80034000 {
reg = <0x80034000 0x2000>;
interrupts = <2 20>;
interrupts = <2>;
clocks = <&clks 33>;
dmas = <&dma_apbh 2>;
dma-names = "rx-tx";
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
......@@ -472,7 +471,7 @@ timrot@80068000 {
auart0: serial@8006c000 {
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
interrupts = <24>;
clocks = <&clks 32>;
dmas = <&dma_apbx 6>, <&dma_apbx 7>;
dma-names = "rx", "tx";
......@@ -482,7 +481,7 @@ auart0: serial@8006c000 {
auart1: serial@8006e000 {
compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <59 60 58>;
interrupts = <59>;
clocks = <&clks 32>;
dmas = <&dma_apbx 8>, <&dma_apbx 9>;
dma-names = "rx", "tx";
......
arch/arm/boot/dts/imx28-cfa10036.dts
View file @ dccfd1e4
......@@ -23,10 +23,7 @@ memory {
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_cfa10036>;
hog_pins_cfa10036: hog-10036@0 {
ssd1306_cfa10036: ssd1306-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
......@@ -83,6 +80,8 @@ i2c0: i2c@80058000 {
ssd1306: oled@3c {
compatible = "solomon,ssd1306fb-i2c";
pinctrl-names = "default";
pinctrl-0 = <&ssd1306_cfa10036>;
reg = <0x3c>;
reset-gpios = <&gpio2 7 0>;
solomon,height = <32>;
......
arch/arm/boot/dts/imx28-cfa10037.dts
View file @ dccfd1e4
......@@ -22,13 +22,19 @@ / {
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&hog_pins_cfa10037>;
hog_pins_cfa10037: hog-10037@0 {
usb_pins_cfa10037: usb-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mac0_pins_cfa10037: mac0-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
>;
fsl,drive-strength = <0>;
......@@ -56,7 +62,8 @@ usb1: usb@80090000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
pinctrl-0 = <&mac0_pins_a
&mac0_pins_cfa10037>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
......@@ -68,6 +75,8 @@ regulators {
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
......
arch/arm/boot/dts/imx28-cfa10049.dts
View file @ dccfd1e4
......@@ -22,32 +22,62 @@ / {
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&hog_pins_cfa10049
&hog_pins_cfa10049_pullup>;
hog_pins_cfa10049: hog-10049@0 {
usb_pins_cfa10049: usb-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
i2cmux_pins_cfa10049: i2cmux-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mac0_pins_cfa10049: mac0-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
pca_pins_cfa10049: pca-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
rotary_pins_cfa10049: rotary-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
......@@ -60,6 +90,7 @@ spi2_pins_cfa10049: spi2-cfa10049@0 {
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -120,6 +151,16 @@ lcdif_pins_cfa10049: lcdif-evk@0 {
fsl,pull-up = <0>;
};
lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
w1_gpio_pins: w1-gpio@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -134,7 +175,8 @@ w1_gpio_pins: w1-gpio@0 {
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_18bit_pins_cfa10049
&lcdif_pins_cfa10049>;
&lcdif_pins_cfa10049
&lcdif_pins_cfa10049_pullup>;
display = <&display>;
status = "okay";
......@@ -181,6 +223,8 @@ i2cmux {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2cmux_pins_cfa10049>;
mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
i2c-parent = <&i2c1>;
......@@ -203,6 +247,8 @@ i2c@3 {
pca9555: pca9555@20 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
pinctrl-0 = <&pca_pins_cfa10049>;
interrupt-parent = <&gpio2>;
interrupts = <19 0x2>;
gpio-controller;
......@@ -239,6 +285,8 @@ regulators {
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10049>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
......@@ -250,7 +298,8 @@ ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
pinctrl-0 = <&mac0_pins_a
&mac0_pins_cfa10049>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
......@@ -320,6 +369,8 @@ dac0: dh2228@2 {
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&rotary_btn_pins_cfa10049>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -333,6 +384,8 @@ rotary_button {
rotary {
compatible = "rotary-encoder";
pinctrl-names = "default";
pinctrl-0 = <&rotary_pins_cfa10049>;
gpios = <&gpio3 24 1>, <&gpio3 25 1>;
linux,axis = <1>; /* REL_Y */
rotary-encoder,relative-axis;
......
arch/arm/boot/dts/imx28-cfa10055.dts
View file @ dccfd1e4
......@@ -23,36 +23,13 @@ / {
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&hog_pins_cfa10055
&hog_pins_cfa10055_pullup>;
hog_pins_cfa10055: hog-10055@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
spi2_pins_cfa10055: spi2-cfa10055@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
......@@ -98,12 +75,23 @@ lcdif_pins_cfa10055: lcdif-evk@0 {
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_18bit_pins_cfa10055
&lcdif_pins_cfa10055>;
&lcdif_pins_cfa10055
&lcdif_pins_cfa10055_pullup>;
display = <&display>;
status = "okay";
......
arch/arm/boot/dts/imx28-cfa10056.dts 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*
* The CFA-10055 is an expansion board for the CFA-10036 module and
* CFA-10037, thus we need to include the CFA-10037 DTS.
*/
/include/ "imx28-cfa10037.dts"
/ {
model = "Crystalfontz CFA-10056 Board";
compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
spi2_pins_cfa10056: spi2-cfa10056@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
lcdif_pins_cfa10056: lcdif-10056@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_cfa10056
&lcdif_pins_cfa10056_pullup >;
display = <&display>;
status = "okay";
display: display {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <32000000>;
hactive = <480>;
vactive = <800>;
hback-porch = <2>;
hfront-porch = <2>;
vback-porch = <2>;
vfront-porch = <2>;
hsync-len = <5>;
vsync-len = <5>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
};
};
spi2 {
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_cfa10056>;
status = "okay";
gpio-sck = <&gpio2 16 0>;
gpio-mosi = <&gpio2 17 0>;
gpio-miso = <&gpio2 18 0>;
cs-gpios = <&gpio3 5 0>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
hx8369: hx8369@0 {
compatible = "himax,hx8369a", "himax,hx8369";
reg = <0>;
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
gpios-reset = <&gpio3 30 0>;
};
};
};
arch/arm/boot/dts/imx28-cfa10057.dts
View file @ dccfd1e4
......@@ -23,35 +23,16 @@ / {
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&hog_pins_cfa10057
&hog_pins_cfa10057_pullup>;
hog_pins_cfa10057: hog-10057@0 {
usb_pins_cfa10057: usb-10057@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -164,6 +145,8 @@ regulators {
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
......
arch/arm/boot/dts/imx28-cfa10058.dts 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 Crystalfontz America, Inc.
* Copyright 2013 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*
* The CFA-10058 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10058 Board";
compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
usb_pins_cfa10058: usb-10058@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_cfa10058: lcdif-10058@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_cfa10058>;
display = <&display>;
status = "okay";
display: display {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <40>;
hfront-porch = <40>;
vback-porch = <13>;
vfront-porch = <29>;
hsync-len = <8>;
vsync-len = <8>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
};
apbx@80040000 {
lradc@80050000 {
fsl,lradc-touchscreen-wires = <4>;
status = "okay";
};
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pins_b>;
status = "okay";
};
usbphy1: usbphy@8007e000 {
status = "okay";
};
};
};
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <&reg_usb1_vbus>;
pinctrl-0 = <&usbphy1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_usb1_vbus: usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10058>;
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 3 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
};
arch/arm/boot/dts/imx28-m28evk.dts
View file @ dccfd1e4
......@@ -235,6 +235,12 @@ auart2: serial@8006e000 {
pinctrl-0 = <&auart2_2pins_b>;
status = "okay";
};
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm4_pins_a>;
status = "okay";
};
};
};
......@@ -270,6 +276,13 @@ mac1: ethernet@800f4000 {
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 4 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
regulators {
compatible = "simple-bus";
......
arch/arm/boot/dts/imx28.dtsi
View file @ dccfd1e4
......@@ -15,6 +15,8 @@ / {
interrupt-parent = <&icoll>;
aliases {
ethernet0 = &mac0;
ethernet1 = &mac1;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
......@@ -27,8 +29,8 @@ aliases {
serial2 = &auart2;
serial3 = &auart3;
serial4 = &auart4;
ethernet0 = &mac0;
ethernet1 = &mac1;
spi0 = &ssp1;
spi1 = &ssp2;
};
cpus {
......@@ -62,9 +64,9 @@ icoll: interrupt-controller@80000000 {
reg = <0x80000000 0x2000>;
};
hsadc@80002000 {
hsadc: hsadc@80002000 {
reg = <0x80002000 0x2000>;
interrupts = <13 87>;
interrupts = <13>;
dmas = <&dma_apbh 12>;
dma-names = "rx";
status = "disabled";
......@@ -86,25 +88,24 @@ dma_apbh: dma-apbh@80004000 {
clocks = <&clks 25>;
};
perfmon@80006000 {
perfmon: perfmon@80006000 {
reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
gpmi-nand@8000c000 {
gpmi: gpmi-nand@8000c000 {
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
interrupts = <41>;
interrupt-names = "bch";
clocks = <&clks 50>;
clock-names = "gpmi_io";
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
......@@ -112,11 +113,10 @@ ssp0: ssp@80010000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80010000 0x2000>;
interrupts = <96 82>;
interrupts = <96>;
clocks = <&clks 46>;
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
......@@ -124,11 +124,10 @@ ssp1: ssp@80012000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80012000 0x2000>;
interrupts = <97 83>;
interrupts = <97>;
clocks = <&clks 47>;
dmas = <&dma_apbh 1>;
dma-names = "rx-tx";
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
......@@ -136,11 +135,10 @@ ssp2: ssp@80014000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80014000 0x2000>;
interrupts = <98 84>;
interrupts = <98>;
clocks = <&clks 48>;
dmas = <&dma_apbh 2>;
dma-names = "rx-tx";
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
......@@ -148,15 +146,14 @@ ssp3: ssp@80016000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80016000 0x2000>;
interrupts = <99 85>;
interrupts = <99>;
clocks = <&clks 49>;
dmas = <&dma_apbh 3>;
dma-names = "rx-tx";
fsl,ssp-dma-channel = <3>;
status = "disabled";
};
pinctrl@80018000 {
pinctrl: pinctrl@80018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
......@@ -521,6 +518,18 @@ saif0_pins_a: saif0@0 {
fsl,pull-up = <1>;
};
saif0_pins_b: saif0@1 {
reg = <1>;
fsl,pinmux-ids = <
0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
saif1_pins_a: saif1@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -639,6 +648,19 @@ lcdif_16bit_pins_a: lcdif-16bit@0 {
fsl,pull-up = <0>;
};
lcdif_sync_pins_a: lcdif-sync@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
can0_pins_a: can0@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -674,6 +696,21 @@ spi2_pins_a: spi2@0 {
fsl,pull-up = <1>;
};
spi3_pins_a: spi3@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
usbphy0_pins_a: usbphy0@0 {
reg = <0>;
fsl,pinmux-ids = <
......@@ -705,14 +742,14 @@ usbphy1_pins_a: usbphy1@0 {
};
};
digctl@8001c000 {
digctl: digctl@8001c000 {
compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
etm: etm@80022000 {
reg = <0x80022000 0x2000>;
status = "disabled";
};
......@@ -733,19 +770,19 @@ dma_apbx: dma-apbx@80024000 {
clocks = <&clks 26>;
};
dcp@80028000 {
dcp: dcp@80028000 {
reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
compatible = "fsl-dcp";
};
pxp@8002a000 {
pxp: pxp@8002a000 {
reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
ocotp: ocotp@8002c000 {
compatible = "fsl,ocotp";
reg = <0x8002c000 0x2000>;
status = "disabled";
......@@ -756,10 +793,10 @@ axi-ahb@8002e000 {
status = "disabled";
};
lcdif@80030000 {
lcdif: lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 0x2000>;
interrupts = <38 86>;
interrupts = <38>;
clocks = <&clks 55>;
dmas = <&dma_apbh 13>;
dma-names = "rx";
......@@ -784,37 +821,37 @@ can1: can@80034000 {
status = "disabled";
};
simdbg@8003c000 {
simdbg: simdbg@8003c000 {
reg = <0x8003c000 0x200>;
status = "disabled";
};
simgpmisel@8003c200 {
simgpmisel: simgpmisel@8003c200 {
reg = <0x8003c200 0x100>;
status = "disabled";
};
simsspsel@8003c300 {
simsspsel: simsspsel@8003c300 {
reg = <0x8003c300 0x100>;
status = "disabled";
};
simmemsel@8003c400 {
simmemsel: simmemsel@8003c400 {
reg = <0x8003c400 0x100>;
status = "disabled";
};
gpiomon@8003c500 {
gpiomon: gpiomon@8003c500 {
reg = <0x8003c500 0x100>;
status = "disabled";
};
simenet@8003c700 {
simenet: simenet@8003c700 {
reg = <0x8003c700 0x100>;
status = "disabled";
};
armjtag@8003c800 {
armjtag: armjtag@8003c800 {
reg = <0x8003c800 0x100>;
status = "disabled";
};
......@@ -836,16 +873,15 @@ clks: clkctrl@80040000 {
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
interrupts = <59>;
#clock-cells = <0>;
clocks = <&clks 53>;
dmas = <&dma_apbx 4>;
dma-names = "rx-tx";
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
power: power@80044000 {
reg = <0x80044000 0x2000>;
status = "disabled";
};
......@@ -853,15 +889,14 @@ power@80044000 {
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
reg = <0x80046000 0x2000>;
interrupts = <58 81>;
interrupts = <58>;
clocks = <&clks 54>;
dmas = <&dma_apbx 5>;
dma-names = "rx-tx";
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
lradc: lradc@80050000 {
compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
interrupts = <10 14 15 16 17 18 19
......@@ -869,15 +904,15 @@ lradc@80050000 {
status = "disabled";
};
spdif@80054000 {
spdif: spdif@80054000 {
reg = <0x80054000 0x2000>;
interrupts = <45 66>;
interrupts = <45>;
dmas = <&dma_apbx 2>;
dma-names = "tx";
status = "disabled";
};
rtc@80056000 {
mxs_rtc: rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
reg = <0x80056000 0x2000>;
interrupts = <29>;
......@@ -888,11 +923,10 @@ i2c0: i2c@80058000 {
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 0x2000>;
interrupts = <111 68>;
interrupts = <111>;
clock-frequency = <100000>;
dmas = <&dma_apbx 6>;
dma-names = "rx-tx";
fsl,i2c-dma-channel = <6>;
status = "disabled";
};
......@@ -901,11 +935,10 @@ i2c1: i2c@8005a000 {
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
interrupts = <110>;
clock-frequency = <100000>;
dmas = <&dma_apbx 7>;
dma-names = "rx-tx";
fsl,i2c-dma-channel = <7>;
status = "disabled";
};
......@@ -918,7 +951,7 @@ pwm: pwm@80064000 {
status = "disabled";
};
timrot@80068000 {
timer: timrot@80068000 {
compatible = "fsl,imx28-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <48 49 50 51>;
......@@ -928,10 +961,9 @@ timrot@80068000 {
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
interrupts = <112>;
dmas = <&dma_apbx 8>, <&dma_apbx 9>;
dma-names = "rx", "tx";
fsl,auart-dma-channel = <8 9>;
clocks = <&clks 45>;
status = "disabled";
};
......@@ -939,7 +971,7 @@ auart0: serial@8006a000 {
auart1: serial@8006c000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
interrupts = <113>;
dmas = <&dma_apbx 10>, <&dma_apbx 11>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
......@@ -949,7 +981,7 @@ auart1: serial@8006c000 {
auart2: serial@8006e000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
interrupts = <114>;
dmas = <&dma_apbx 12>, <&dma_apbx 13>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
......@@ -959,7 +991,7 @@ auart2: serial@8006e000 {
auart3: serial@80070000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
interrupts = <115>;
dmas = <&dma_apbx 14>, <&dma_apbx 15>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
......@@ -969,7 +1001,7 @@ auart3: serial@80070000 {
auart4: serial@80072000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
interrupts = <116>;
dmas = <&dma_apbx 0>, <&dma_apbx 1>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
......@@ -1026,7 +1058,7 @@ usb1: usb@80090000 {
status = "disabled";
};
dflpt@800c0000 {
dflpt: dflpt@800c0000 {
reg = <0x800c0000 0x10000>;
status = "disabled";
};
......@@ -1049,10 +1081,9 @@ mac1: ethernet@800f4000 {
status = "disabled";
};
switch@800f8000 {
etn_switch: switch@800f8000 {
reg = <0x800f8000 0x8000>;
status = "disabled";
};
};
};
arch/arm/boot/dts/pxa3xx.dtsi
View file @ dccfd1e4
......@@ -28,5 +28,16 @@ pxairq: interrupt-controller@40d00000 {
marvell,intc-priority;
marvell,intc-nr-irqs = <56>;
};
gpio: gpio@40e00000 {
compatible = "intel,pxa3xx-gpio";
reg = <0x40e00000 0x10000>;
interrupt-names = "gpio0", "gpio1", "gpio_mux";
interrupts = <8 9 10>;
gpio-controller;
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
};
};
};
arch/arm/boot/dts/r8a73a4-ape6evm.dts
View file @ dccfd1e4
......@@ -50,3 +50,25 @@ ethernet@8000000 {
};
};
};
&i2c5 {
vdd_dvfs: max8973@1b {
compatible = "maxim,max8973";
reg = <0x1b>;
regulator-min-microvolt = <935000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
};
&cpu0 {
cpu0-supply = <&vdd_dvfs>;
operating-points = <
/* kHz uV */
1950000 1115000
1462500 995000
>;
voltage-tolerance = <1>; /* 1% */
};
arch/arm/boot/dts/r8a73a4.dtsi
View file @ dccfd1e4
......@@ -85,4 +85,137 @@ thermal@e61f0000 {
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 174 0x4>;
};
i2c1: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 175 0x4>;
};
i2c2: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 176 0x4>;
};
i2c3: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 177 0x4>;
};
i2c4: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 178 0x4>;
};
i2c5: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 179 0x4>;
};
i2c6: i2c@e6550000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 184 0x4>;
};
i2c7: i2c@e6560000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 185 0x4>;
};
i2c8: i2c@e6570000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 173 0x4>;
};
mmcif0: mmcif@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 169 0x4>;
reg-io-width = <4>;
status = "disabled";
};
mmcif1: mmcif@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 170 0x4>;
reg-io-width = <4>;
status = "disabled";
};
pfc: pfc@e6050000 {
compatible = "renesas,pfc-r8a73a4";
reg = <0 0xe6050000 0 0x9000>;
gpio-controller;
#gpio-cells = <2>;
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a73a4-sdhi";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a73a4-sdhi";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a73a4-sdhi";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
cap-sd-highspeed;
status = "disabled";
};
};
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
View file @ dccfd1e4
......@@ -10,6 +10,7 @@
/dts-v1/;
/include/ "r8a7740.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "armadillo 800 eva reference";
......@@ -33,6 +34,21 @@ reg_3p3v: regulator@0 {
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
led1 {
gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
};
led2 {
gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
};
led3 {
gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
};
led4 {
gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
};
};
};
&i2c0 {
......@@ -41,5 +57,23 @@ touchscreen: st1232@55 {
reg = <0x55>;
interrupt-parent = <&irqpin1>;
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
pinctrl-0 = <&st1232_pins>;
pinctrl-names = "default";
gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
};
&pfc {
pinctrl-0 = <&scifa1_pins>;
pinctrl-names = "default";
scifa1_pins: scifa1 {
renesas,groups = "scifa1_data";
renesas,function = "scifa1";
};
st1232_pins: st1232 {
renesas,groups = "intc_irq10";
renesas,function = "intc";
};
};
arch/arm/boot/dts/r8a7740.dtsi
View file @ dccfd1e4
......@@ -139,4 +139,12 @@ i2c1: i2c@e6c20000 {
0 72 0x4
0 73 0x4>;
};
pfc: pfc@e6050000 {
compatible = "renesas,pfc-r8a7740";
reg = <0xe6050000 0x8000>,
<0xe605800c 0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
arch/arm/boot/dts/r8a7778.dtsi
View file @ dccfd1e4
......@@ -32,4 +32,70 @@ gic: interrupt-controller@fe438000 {
reg = <0xfe438000 0x1000>,
<0xfe430000 0x100>;
};
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 103 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio1: gpio@ffc41000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 103 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@ffc42000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 103 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@ffc43000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 103 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@ffc44000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 103 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 27>;
#interrupt-cells = <2>;
interrupt-controller;
};
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc000 0x118>;
#gpio-range-cells = <3>;
};
};
arch/arm/boot/dts/r8a7779-marzen-reference.dts
View file @ dccfd1e4
......@@ -11,6 +11,7 @@
/dts-v1/;
/include/ "r8a7779.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "marzen";
......@@ -37,6 +38,9 @@ fixedregulator3v3: fixedregulator@0 {
lan0@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
pinctrl-0 = <&lan0_pins>;
pinctrl-names = "default";
phy-mode = "mii";
interrupt-parent = <&gic>;
interrupts = <0 28 0x4>;
......@@ -44,4 +48,49 @@ lan0@18000000 {
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
leds {
compatible = "gpio-leds";
led2 {
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
};
led3 {
gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
};
led4 {
gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
};
};
};
&pfc {
pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
pinctrl-names = "default";
lan0_pins: lan0 {
intc {
renesas,groups = "intc_irq1_b";
renesas,function = "intc";
};
lbsc {
renesas,groups = "lbsc_ex_cs0";
renesas,function = "lbsc";
};
};
scif2_pins: scif2 {
renesas,groups = "scif2_data_c";
renesas,function = "scif2";
};
scif4_pins: scif4 {
renesas,groups = "scif4_data";
renesas,function = "scif4";
};
sdhi0_pins: sdhi0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
"sdhi0_wp";
renesas,function = "sdhi0";
};
};
arch/arm/boot/dts/r8a7779.dtsi
View file @ dccfd1e4
......@@ -48,6 +48,90 @@ gic: interrupt-controller@f0001000 {
<0xf0000100 0x100>;
};
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 141 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio1: gpio@ffc41000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 142 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@ffc42000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 143 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@ffc43000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 144 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@ffc44000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 145 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio5: gpio@ffc45000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc45000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 146 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio6: gpio@ffc46000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc46000 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 147 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 9>;
#interrupt-cells = <2>;
interrupt-controller;
};
irqpin0: irqpin@fe780010 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
......@@ -101,6 +185,12 @@ i2c3: i2c@0xffc73000 {
interrupts = <0 81 0x4>;
};
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
#gpio-range-cells = <3>;
};
thermal@ffc48000 {
compatible = "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
......
arch/arm/boot/dts/r8a7790.dtsi
View file @ dccfd1e4
......@@ -38,6 +38,78 @@ gic: interrupt-controller@f1001000 {
interrupts = <1 9 0xf04>;
};
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc40000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 4 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio1: gpio@ffc41000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc41000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 5 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@ffc42000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc42000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 6 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@ffc43000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc43000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 7 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@ffc44000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc44000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 8 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio5: gpio@ffc45000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc45000 0 0x2c>;
interrupt-parent = <&gic>;
interrupts = <0 9 0x4>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
......@@ -54,4 +126,64 @@ irqc0: interrupt-controller@e61c0000 {
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
mmcif0: mmcif@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 169 0x4>;
reg-io-width = <4>;
status = "disabled";
};
mmcif1: mmcif@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 170 0x4>;
reg-io-width = <4>;
status = "disabled";
};
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
#gpio-range-cells = <3>;
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi3: sdhi@ee160000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee160000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 168 4>;
cap-sd-highspeed;
status = "disabled";
};
};
arch/arm/boot/dts/sama5d3.dtsi
View file @ dccfd1e4
......@@ -48,6 +48,11 @@ cpu@0 {
};
};
pmu {
compatible = "arm,cortex-a5-pmu";
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
};
memory {
reg = <0x20000000 0x8000000>;
};
......
arch/arm/boot/dts/sh7372.dtsi
View file @ dccfd1e4
......@@ -23,4 +23,12 @@ cpu@0 {
reg = <0x0>;
};
};
pfc: pfc@e6050000 {
compatible = "renesas,pfc-sh7372";
reg = <0xe6050000 0x8000>,
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
};
};
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
View file @ dccfd1e4
......@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "sh73a0.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "KZM-A9-GT";
......@@ -58,6 +59,24 @@ reg_3p3v: regulator@1 {
regulator-boot-on;
};
vmmc_sdhi0: regulator@2 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vmmc_sdhi2: regulator@3 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
lan9220@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
......@@ -70,6 +89,22 @@ lan9220@10000000 {
vddvario-supply = <&reg_1p8v>;
vdd33a-supply = <&reg_3p3v>;
};
leds {
compatible = "gpio-leds";
led1 {
gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
};
led2 {
gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
};
led3 {
gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
};
led4 {
gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
};
};
};
&i2c0 {
......@@ -145,20 +180,71 @@ ldo8 {
};
};
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
};
&mmcif {
pinctrl-0 = <&mmcif_pins>;
pinctrl-names = "default";
bus-width = <8>;
vmmc-supply = <&reg_1p8v>;
status = "okay";
};
&pfc {
pinctrl-0 = <&scifa4_pins>;
pinctrl-names = "default";
i2c3_pins: i2c3 {
renesas,groups = "i2c3_1";
renesas,function = "i2c3";
};
mmcif_pins: mmcif {
mux {
renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
renesas,function = "mmc0";
};
cfg {
renesas,groups = "mmc0_data8_0";
renesas,pins = "PORT279";
bias-pull-up;
};
};
scifa4_pins: scifa4 {
renesas,groups = "scifa4_data", "scifa4_ctrl";
renesas,function = "scifa4";
};
sdhi0_pins: sdhi0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
renesas,function = "sdhi0";
};
sdhi2_pins: sdhi2 {
renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
renesas,function = "sdhi2";
};
};
&sdhi0 {
vmmc-supply = <&reg_3p3v>;
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&vmmc_sdhi0>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
vmmc-supply = <&reg_3p3v>;
pinctrl-0 = <&sdhi2_pins>;
pinctrl-names = "default";
vmmc-supply = <&vmmc_sdhi2>;
bus-width = <4>;
broken-cd;
status = "okay";
......
arch/arm/boot/dts/sh73a0.dtsi
View file @ dccfd1e4
......@@ -222,4 +222,12 @@ sdhi2: sdhi@ee140000 {
cap-sd-highspeed;
status = "disabled";
};
pfc: pfc@e6050000 {
compatible = "renesas,pfc-sh73a0";
reg = <0xe6050000 0x8000>,
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
};
};
arch/arm/boot/dts/socfpga.dtsi
View file @ dccfd1e4
......@@ -476,25 +476,25 @@ timer@fffec600 {
};
timer0: timer0@ffc08000 {
compatible = "snps,dw-apb-timer-sp";
compatible = "snps,dw-apb-timer";
interrupts = <0 167 4>;
reg = <0xffc08000 0x1000>;
};
timer1: timer1@ffc09000 {
compatible = "snps,dw-apb-timer-sp";
compatible = "snps,dw-apb-timer";
interrupts = <0 168 4>;
reg = <0xffc09000 0x1000>;
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer-osc";
compatible = "snps,dw-apb-timer";
interrupts = <0 169 4>;
reg = <0xffd00000 0x1000>;
};
timer3: timer3@ffd01000 {
compatible = "snps,dw-apb-timer-osc";
compatible = "snps,dw-apb-timer";
interrupts = <0 170 4>;
reg = <0xffd01000 0x1000>;
};
......
arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2012 ST-Ericsson
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "ste-nomadik-pinctrl.dtsi"
/ {
soc {
pinctrl {
uart0 {
uart0_default_mux: uart0_mux {
default_mux {
ste,function = "u0";
ste,pins = "u0_a_1";
};
};
uart0_default_mode: uart0_default {
default_cfg1 {
ste,pins = "GPIO0", "GPIO2";
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO1", "GPIO3";
ste,config = <&out_hi>;
};
};
uart0_sleep_mode: uart0_sleep {
sleep_cfg1 {
ste,pins = "GPIO0", "GPIO2";
ste,config = <&slpm_in_pu>;
};
sleep_cfg2 {
ste,pins = "GPIO1", "GPIO3";
ste,config = <&slpm_out_hi>;
};
};
};
uart2 {
uart2_default_mode: uart2_default {
default_mux {
ste,function = "u2";
ste,pins = "u2txrx_a_1";
};
default_cfg1 {
ste,pins = "GPIO120";
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO121";
ste,config = <&out_hi>;
};
};
uart2_sleep_mode: uart2_sleep {
sleep_cfg1 {
ste,pins = "GPIO120";
ste,config = <&slpm_in_pu>;
};
sleep_cfg2 {
ste,pins = "GPIO121";
ste,config = <&slpm_out_hi>;
};
};
};
i2c0 {
i2c0_default_mux: i2c_mux {
default_mux {
ste,function = "i2c0";
ste,pins = "i2c0_a_1";
};
};
i2c0_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO147", "GPIO148";
ste,config = <&in_pu>;
};
};
i2c0_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO147", "GPIO148";
ste,config = <&slpm_in_pu>;
};
};
};
i2c1 {
i2c1_default_mux: i2c_mux {
default_mux {
ste,function = "i2c1";
ste,pins = "i2c1_b_2";
};
};
i2c1_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO16", "GPIO17";
ste,config = <&in_pu>;
};
};
i2c1_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO16", "GPIO17";
ste,config = <&slpm_in_pu>;
};
};
};
i2c2 {
i2c2_default_mux: i2c_mux {
default_mux {
ste,function = "i2c2";
ste,pins = "i2c2_b_2";
};
};
i2c2_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO10", "GPIO11";
ste,config = <&in_pu>;
};
};
i2c2_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO11", "GPIO11";
ste,config = <&slpm_in_pu>;
};
};
};
i2c4 {
i2c4_default_mux: i2c_mux {
default_mux {
ste,function = "i2c4";
ste,pins = "i2c4_b_2";
};
};
i2c4_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO122", "GPIO123";
ste,config = <&in_pu>;
};
};
i2c4_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO122", "GPIO123";
ste,config = <&slpm_in_pu>;
};
};
};
i2c5 {
i2c5_default_mux: i2c_mux {
default_mux {
ste,function = "i2c5";
ste,pins = "i2c5_c_2";
};
};
i2c5_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO118", "GPIO119";
ste,config = <&in_pu>;
};
};
i2c5_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO118", "GPIO119";
ste,config = <&slpm_in_pu>;
};
};
};
};
};
};
arch/arm/boot/dts/ste-ccu8540.dts 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "ste-dbx5x0.dtsi"
#include "ste-ccu8540-pinctrl.dtsi"
/ {
model = "ST-Ericsson U8540 platform with Device Tree";
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
memory@0 {
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
};
soc {
pinctrl {
compatible = "stericsson,db8540-pinctrl";
};
prcmu@80157000 {
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
};
uart@80120000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
pinctrl-1 = <&uart0_sleep_mode>;
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart2_default_mode>;
pinctrl-1 = <&uart2_sleep_mode>;
status = "okay";
};
i2c0: i2c@80004000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
pinctrl-1 = <&i2c0_sleep_mode>;
};
i2c1: i2c@80122000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
pinctrl-1 = <&i2c1_sleep_mode>;
};
i2c2: i2c@80128000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
pinctrl-1 = <&i2c2_sleep_mode>;
};
i2c3: i2c@80110000 {
status = "disabled";
};
i2c4: i2c@8012a000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
pinctrl-1 = <&i2c4_sleep_mode>;
};
i2c5: i2c@80001000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
pinctrl-1 = <&i2c5_sleep_mode>;
};
};
};
arch/arm/boot/dts/ccu9540.dts → arch/arm/boot/dts/ste-ccu9540.dts
View file @ dccfd1e4
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "ste-dbx5x0.dtsi"
/ {
model = "ST-Ericsson CCU9540 platform with Device Tree";
......
arch/arm/boot/dts/dbx5x0.dtsi → arch/arm/boot/dts/ste-dbx5x0.dtsi
View file @ dccfd1e4
......@@ -457,8 +457,36 @@ codec: ab8500-codec {
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
ext_regulators: ab8500-ext-regulators {
compatible = "stericsson,ab8500-ext-regulator";
ab8500_ext1_reg: ab8500_ext1 {
regulator-compatible = "ab8500_ext1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ab8500_ext2_reg: ab8500_ext2 {
regulator-compatible = "ab8500_ext2";
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-boot-on;
regulator-always-on;
};
ab8500_ext3_reg: ab8500_ext3 {
regulator-compatible = "ab8500_ext3";
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
};
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
vin-supply = <&ab8500_ext3_reg>;
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
......
arch/arm/boot/dts/href.dtsi → arch/arm/boot/dts/ste-href.dtsi
View file @ dccfd1e4
......@@ -10,7 +10,7 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "dbx5x0.dtsi"
#include "ste-dbx5x0.dtsi"
/ {
memory {
......
arch/arm/boot/dts/hrefprev60.dts → arch/arm/boot/dts/ste-hrefprev60.dts
View file @ dccfd1e4
......@@ -10,9 +10,9 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "href.dtsi"
#include "stuib.dtsi"
#include "ste-dbx5x0.dtsi"
#include "ste-href.dtsi"
#include "ste-stuib.dtsi"
/ {
model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
......
arch/arm/boot/dts/hrefv60plus.dts → arch/arm/boot/dts/ste-hrefv60plus.dts
View file @ dccfd1e4
......@@ -10,9 +10,9 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "href.dtsi"
#include "stuib.dtsi"
#include "ste-dbx5x0.dtsi"
#include "ste-href.dtsi"
#include "ste-stuib.dtsi"
/ {
model = "ST-Ericsson HREF (v60+) platform with Device Tree";
......
arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2012 ST-Ericsson
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/pinctrl/nomadik.h>
/ {
in_nopull: in_nopull {
ste,input = <INPUT_NOPULL>;
};
in_pu: input_pull_up {
ste,input = <INPUT_PULLUP>;
};
in_pd: input_pull_down {
ste,input = <INPUT_PULLDOWN>;
};
out_hi: output_high {
ste,output = <OUTPUT_HIGH>;
};
out_lo: output_low {
ste,output = <OUTPUT_LOW>;
};
gpio_out_lo: gpio_output_low {
ste,gpio = <GPIOMODE_ENABLED>;
ste,output = <OUTPUT_LOW>;
};
slpm_in_pu: slpm_in_pu {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_INPUT_PULLUP>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_in_wkup_pdis: slpm_in_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_lo: slpm_out_lo {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_LOW>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_out_hi: slpm_out_hi {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_wkup_pdis: slpm_out_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_DIR_OUTPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
in_wkup_pdis: in_wkup_pdis {
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
out_hi_wkup_pdis: out_hi_wkup_pdis {
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
out_wkup_pdis: out_wkup_pdis {
ste,sleep-output = <SLPM_DIR_OUTPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
};
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
View file @ dccfd1e4
......@@ -140,18 +140,30 @@ mmcsd_default_cfg3 {
};
};
i2c0 {
i2c0_default_mux: i2c0_mux {
i2c0_default_mux {
ste,function = "i2c0";
ste,pins = "i2c0_a_1";
};
};
i2c0_default_mode: i2c0_default {
i2c0_default_cfg {
ste,pins = "GPIO62_D3", "GPIO63_D2";
ste,input = <1>;
ste,input = <0>;
};
};
};
i2c1 {
i2c1_default_mux: i2c1_mux {
i2c1_default_mux {
ste,function = "i2c1";
ste,pins = "i2c1_a_1";
};
};
i2c1_default_mode: i2c1_default {
i2c1_default_cfg {
ste,pins = "GPIO53_L4", "GPIO54_L3";
ste,input = <1>;
ste,input = <0>;
};
};
};
......@@ -159,7 +171,7 @@ i2c2 {
i2c2_default_mode: i2c2_default {
i2c2_default_cfg {
ste,pins = "GPIO73_C21", "GPIO74_C20";
ste,input = <1>;
ste,input = <0>;
};
};
};
......@@ -682,13 +694,17 @@ ethernet@300 {
/* I2C0 connected to the STw4811 power management chip */
i2c0 {
compatible = "i2c-gpio";
gpios = <&gpio1 31 0>, /* sda */
<&gpio1 30 0>; /* scl */
compatible = "st,nomadik-i2c", "arm,primecell";
reg = <0x101f8000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <20>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&i2c0clk>, <&pclki2c0>;
clock-names = "mclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_default_mode>;
pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
stw4811@2d {
compatible = "st,stw4811";
......@@ -698,13 +714,17 @@ stw4811@2d {
/* I2C1 connected to various sensors */
i2c1 {
compatible = "i2c-gpio";
gpios = <&gpio1 22 0>, /* sda */
<&gpio1 21 0>; /* scl */
compatible = "st,nomadik-i2c", "arm,primecell";
reg = <0x101f7000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <21>;
clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&i2c1clk>, <&pclki2c1>;
clock-names = "mclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_default_mode>;
pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
camera@2d {
compatible = "st,camera";
......
arch/arm/boot/dts/snowball.dts → arch/arm/boot/dts/ste-snowball.dts
View file @ dccfd1e4
......@@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "ste-dbx5x0.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
......@@ -165,34 +165,6 @@ uart@80007000 {
status = "okay";
};
i2c@80004000 {
tc3589x@42 {
//compatible = "tc3589x";
reg = <0x42>;
gpios = <&gpio6 25 0x4>;
interrupt-parent = <&gpio6>;
};
tps61052@33 {
//compatible = "tps61052";
reg = <0x33>;
};
};
i2c@80128000 {
lp5521@33 {
// compatible = "lp5521";
reg = <0x33>;
};
lp5521@34 {
// compatible = "lp5521";
reg = <0x34>;
};
bh1780@29 {
// compatible = "rohm,bh1780gli";
reg = <0x33>;
};
};
cpufreq-cooling {
status = "okay";
};
......@@ -310,6 +282,20 @@ ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
};
ext_regulators: ab8500-ext-regulators {
ab8500_ext1_reg: ab8500_ext1 {
regulator-name = "ab8500-ext-supply1";
};
ab8500_ext2_reg_reg: ab8500_ext2 {
regulator-name = "ab8500-ext-supply2";
};
ab8500_ext3_reg_reg: ab8500_ext3 {
regulator-name = "ab8500-ext-supply3";
};
};
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
......
arch/arm/boot/dts/sun4i-a10-a1000.dts 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 Emilio López
*
* Emilio López <emilio@elopez.com.ar>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "sun4i-a10.dtsi"
/ {
model = "Mele A1000";
compatible = "mele,a1000", "allwinner,sun4i-a10";
aliases {
serial0 = &uart0;
};
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
mdio@01c0b080 {
phy-supply = <&reg_emac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
pinctrl@01c20800 {
emac_power_pin_a1000: emac_power_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
led_pins_a1000: led_pins@0 {
allwinner,pins = "PH10", "PH20";
allwinner,function = "gpio_out";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
i2c0: i2c@01c2ac00 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_a1000>;
red {
label = "a1000:red:usr";
gpios = <&pio 7 10 0>;
};
blue {
label = "a1000:blue:usr";
gpios = <&pio 7 20 0>;
};
};
regulators {
compatible = "simple-bus";
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&emac_power_pin_a1000>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&pio 7 15 0>;
};
};
};
arch/arm/boot/dts/sun4i-a10-cubieboard.dts
View file @ dccfd1e4
......@@ -26,7 +26,7 @@ chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc@01c20000 {
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
......@@ -76,12 +76,12 @@ leds {
pinctrl-0 = <&led_pins_cubieboard>;
blue {
label = "cubieboard::blue";
label = "cubieboard:blue:usr";
gpios = <&pio 7 21 0>; /* LED1 */
};
green {
label = "cubieboard::green";
label = "cubieboard:green:usr";
gpios = <&pio 7 20 0>; /* LED2 */
linux,default-trigger = "heartbeat";
};
......
arch/arm/boot/dts/sun4i-a10-hackberry.dts
View file @ dccfd1e4
......@@ -22,7 +22,7 @@ chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc@01c20000 {
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
......
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
View file @ dccfd1e4
......@@ -22,7 +22,7 @@ chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc@01c20000 {
soc@01c00000 {
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
......
arch/arm/boot/dts/sun4i-a10.dtsi
View file @ dccfd1e4
......@@ -160,11 +160,10 @@ apb1_gates: apb1_gates@01c2006c {
};
};
soc@01c20000 {
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x01c20000 0x300000>;
ranges;
emac: ethernet@01c0b000 {
......
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
View file @ dccfd1e4
......@@ -18,7 +18,7 @@ / {
model = "Olimex A10s-Olinuxino Micro";
compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
soc@01c20000 {
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
......@@ -60,6 +60,31 @@ uart3: serial@01c28c00 {
pinctrl-0 = <&uart3_pins_a>;
status = "okay";
};
i2c0: i2c@01c2ac00 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
i2c1: i2c@01c2b000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
at24@50 {
compatible = "at,24c16";
pagesize = <16>;
reg = <0x50>;
read-only;
};
};
i2c2: i2c@01c2b400 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
};
leds {
......
arch/arm/boot/dts/sun5i-a10s.dtsi
View file @ dccfd1e4
......@@ -157,11 +157,10 @@ apb1_gates: apb1_gates@01c2006c {
};
};
soc@01c20000 {
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x01c20000 0x300000>;
ranges;
emac: ethernet@01c0b000 {
......@@ -229,6 +228,27 @@ emac_pins_a: emac0@0 {
allwinner,drive = <0>;
allwinner,pull = <0>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB15", "PB16";
allwinner,function = "i2c1";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB17", "PB18";
allwinner,function = "i2c2";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
timer@01c20c00 {
......@@ -282,5 +302,38 @@ uart3: serial@01c28c00 {
clocks = <&apb1_gates 19>;
status = "disabled";
};
i2c0: i2c@01c2ac00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
};
i2c1: i2c@01c2b000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
};
i2c2: i2c@01c2b400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
};
};
};
arch/arm/boot/dts/sun5i-a13-olinuxino.dts
View file @ dccfd1e4
......@@ -22,7 +22,7 @@ chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc@01c20000 {
soc@01c00000 {
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
......
arch/arm/boot/dts/sun5i-a13.dtsi
View file @ dccfd1e4
......@@ -150,11 +150,10 @@ apb1_gates: apb1_gates@01c2006c {
};
};
soc@01c20000 {
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x01c20000 0x300000>;
ranges;
intc: interrupt-controller@01c20400 {
......
arch/arm/boot/dts/sun6i-a31-colombus.dts 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "sun6i-a31.dtsi"
/ {
model = "WITS A31 Colombus Evaluation Board";
compatible = "wits,colombus", "allwinner,sun6i-a31";
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc@01c00000 {
uart0: serial@01c28000 {
status = "okay";
};
};
};
arch/arm/boot/dts/sun6i-a31.dtsi 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
};
};
memory {
reg = <0x40000000 0x80000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
};
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <0 18 1>,
<0 19 1>,
<0 20 1>,
<0 21 1>,
<0 22 1>;
clocks = <&osc>;
};
wdt1: watchdog@01c20ca0 {
compatible = "allwinner,sun6i-wdt";
reg = <0x01c20ca0 0x20>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <0 0 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <0 1 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <0 2 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <0 3 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <0 4 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <0 5 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc>;
status = "disabled";
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <1 9 0xf04>;
};
};
};
arch/arm/boot/dts/ccu8540.dts → arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
View file @ dccfd1e4
/*
* Copyright 2013 ST-Ericsson AB
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
......@@ -10,31 +12,22 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
/include/ "sun7i-a20.dtsi"
/ {
model = "ST-Ericsson U8540 platform with Device Tree";
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
memory@0 {
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
};
soc {
prcmu@80157000 {
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
};
model = "Olimex A20-Olinuxino Micro";
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
uart@80120000 {
soc@01c00000 {
uart0: serial@01c28000 {
status = "okay";
};
uart@80121000 {
uart6: serial@01c29800 {
status = "okay";
};
uart@80007000 {
uart7: serial@01c29c00 {
status = "okay";
};
};
......
arch/arm/boot/dts/sun7i-a20.dtsi 0 → 100644
View file @ dccfd1e4
/*
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
};
memory {
reg = <0x40000000 0x80000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: osc24M@01c20050 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
osc32k: osc32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
};
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
interrupts = <0 22 1>,
<0 23 1>,
<0 24 1>,
<0 25 1>,
<0 67 1>,
<0 68 1>;
clocks = <&osc24M>;
};
wdt: watchdog@01c20c90 {
compatible = "allwinner,sun4i-wdt";
reg = <0x01c20c90 0x10>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <0 1 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <0 2 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <0 3 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <0 4 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <0 17 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <0 18 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <0 19 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <0 20 1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
status = "disabled";
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <1 9 0xf04>;
};
};
};
arch/arm/boot/dts/tegra114-dalmore.dts
View file @ dccfd1e4
......@@ -791,7 +791,7 @@ tps65090_dcdc2_reg: dcdc2 {
regulator-boot-on;
};
dcdc3 {
tps65090_dcdc3_reg: dcdc3 {
regulator-name = "vdd-ao";
regulator-always-on;
regulator-boot-on;
......@@ -836,6 +836,182 @@ ldo2 {
};
};
};
palmas: tps65913 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
palmas_gpio: gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
pmic {
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
smps1-in-supply = <&tps65090_dcdc3_reg>;
smps3-in-supply = <&tps65090_dcdc3_reg>;
smps4-in-supply = <&tps65090_dcdc2_reg>;
smps7-in-supply = <&tps65090_dcdc2_reg>;
smps8-in-supply = <&tps65090_dcdc2_reg>;
smps9-in-supply = <&tps65090_dcdc2_reg>;
ldo1-in-supply = <&tps65090_dcdc2_reg>;
ldo2-in-supply = <&tps65090_dcdc2_reg>;
ldo3-in-supply = <&palmas_smps3_reg>;
ldo4-in-supply = <&tps65090_dcdc2_reg>;
ldo5-in-supply = <&vdd_ac_bat_reg>;
ldo6-in-supply = <&tps65090_dcdc2_reg>;
ldo7-in-supply = <&tps65090_dcdc2_reg>;
ldo8-in-supply = <&tps65090_dcdc3_reg>;
ldo9-in-supply = <&palmas_smps9_reg>;
ldoln-in-supply = <&tps65090_dcdc1_reg>;
ldousb-in-supply = <&tps65090_dcdc1_reg>;
regulators {
smps12 {
regulator-name = "vddio-ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
palmas_smps3_reg: smps3 {
regulator-name = "vddio-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
smps45 {
regulator-name = "vdd-core";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
smps457 {
regulator-name = "vdd-core";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
smps8 {
regulator-name = "avdd-pll";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
};
palmas_smps9_reg: smps9 {
regulator-name = "sdhci-vdd-sd-slot";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo1 {
regulator-name = "avdd-cam1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo2 {
regulator-name = "avdd-cam2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo3 {
regulator-name = "avdd-dsi-csi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-name = "vpp-fuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo6 {
regulator-name = "vdd-sensor-2v85";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
ldo7 {
regulator-name = "vdd-af-cam1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo8 {
regulator-name = "vdd-rtc";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-always-on;
regulator-boot-on;
ti,enable-ldo8-tracking;
};
ldo9 {
regulator-name = "vddio-sdmmc-2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldoln {
regulator-name = "hvdd-usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldousb {
regulator-name = "avdd-usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
regen1 {
regulator-name = "rail-3v3";
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
regen2 {
regulator-name = "rail-5v0";
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
};
rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
interrupts = <8 0>;
};
};
};
spi@7000da00 {
......@@ -850,6 +1026,13 @@ spi-flash@0 {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <500>;
nvidia,cpu-pwr-off-time = <300>;
nvidia,core-pwr-good-time = <641 3845>;
nvidia,core-pwr-off-time = <61036>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
};
ahub {
......@@ -870,6 +1053,15 @@ sdhci@78000600 {
non-removable;
};
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
status = "okay";
vbus-supply = <&usb3_vbus_reg>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -883,6 +1075,35 @@ clk32k_in: clock {
};
};
gpio-keys {
compatible = "gpio-keys";
home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
linux,code = <102>; /* KEY_HOME */
};
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
volume_down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
volume_up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -951,6 +1172,16 @@ vdd_hdmi_reg: regulator@5 {
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&tps65090_dcdc1_reg>;
};
vdd_cam_1v8_reg: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "vdd_cam_1v8_reg";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
gpio = <&palmas_gpio 6 0>;
};
};
sound {
......@@ -964,7 +1195,9 @@ sound {
"Speakers", "SPORP",
"Speakers", "SPORN",
"Speakers", "SPOLP",
"Speakers", "SPOLN";
"Speakers", "SPOLN",
"Mic Jack", "MICBIAS1",
"IN2P", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5640>;
......
arch/arm/boot/dts/tegra114-pluto.dts deleted 100644 → 0
View file @ 8e73e367
/dts-v1/;
#include "tegra114.dtsi"
/ {
model = "NVIDIA Tegra114 Pluto evaluation board";
compatible = "nvidia,pluto", "nvidia,tegra114";
memory {
reg = <0x80000000 0x40000000>;
};
serial@70006300 {
status = "okay";
};
pmc {
nvidia,invert-interrupt;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
};
arch/arm/boot/dts/tegra114.dtsi
View file @ dccfd1e4
......@@ -430,6 +430,68 @@ sdhci@78000600 {
status = "disable";
};
usb@7d000000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>;
nvidia,phy = <&phy1>;
status = "disabled";
};
phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>,
<&tegra_car TEGRA114_CLK_PLL_U>,
<&tegra_car TEGRA114_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <9>;
nvidia,xcvr-lsfslew = <0>;
nvidia,xcvr-lsrslew = <3>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>;
nvidia,phy = <&phy3>;
status = "disabled";
};
phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>,
<&tegra_car TEGRA114_CLK_PLL_U>,
<&tegra_car TEGRA114_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <9>;
nvidia,xcvr-lsfslew = <0>;
nvidia,xcvr-lsrslew = <3>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
status = "disabled";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/tegra20-colibri-512.dtsi
View file @ dccfd1e4
......@@ -363,7 +363,7 @@ temperature-sensor@4c {
};
pmc {
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
......
arch/arm/boot/dts/tegra20-harmony.dts
View file @ dccfd1e4
......@@ -335,7 +335,7 @@ sm2_reg: sm2 {
regulator-always-on;
};
ldo0 {
pci_clk_reg: ldo0 {
regulator-name = "vdd_ldo0,vddio_pex_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
......@@ -417,7 +417,7 @@ temperature-sensor@4c {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
......@@ -425,6 +425,20 @@ pmc {
nvidia,sys-clock-req-active-high;
};
pcie-controller {
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
status = "okay";
pci@1,0 {
status = "okay";
};
pci@2,0 {
status = "okay";
};
};
usb@c5000000 {
status = "okay";
};
......@@ -643,7 +657,7 @@ regulator@2 {
enable-active-high;
};
regulator@3 {
pci_vdd_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vdd_1v05";
......@@ -651,8 +665,6 @@ regulator@3 {
regulator-max-microvolt = <1050000>;
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
/* Hack until board-harmony-pcie.c is removed */
status = "disabled";
};
regulator@4 {
......
arch/arm/boot/dts/tegra20-paz00.dts
View file @ dccfd1e4
......@@ -417,7 +417,7 @@ adt7461@4c {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <0>;
nvidia,core-pwr-good-time = <3845 3845>;
......
arch/arm/boot/dts/tegra20-seaboard.dts
View file @ dccfd1e4
......@@ -518,7 +518,7 @@ magnetometer@c {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
......@@ -828,7 +828,7 @@ vbus_reg: regulator@3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 24 0>; /* PD0 */
gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
regulator-always-on;
regulator-boot-on;
};
......
arch/arm/boot/dts/tegra20-tamonten.dtsi
View file @ dccfd1e4
......@@ -366,7 +366,7 @@ sm2_reg: sm2 {
regulator-always-on;
};
ldo0 {
pci_clk_reg: ldo0 {
regulator-name = "vdd_ldo0,vddio_pex_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
......@@ -459,7 +459,7 @@ temperature-sensor@4c {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
......@@ -467,6 +467,11 @@ pmc {
nvidia,sys-clock-req-active-high;
};
pcie-controller {
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
};
usb@c5008000 {
status = "okay";
};
......@@ -509,5 +514,15 @@ vdd_5v0_reg: regulator@0 {
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
pci_vdd_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vdd_1v05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&pmic 2 0>;
enable-active-high;
};
};
};
arch/arm/boot/dts/tegra20-tec.dts
View file @ dccfd1e4
......@@ -32,6 +32,14 @@ wm8903: wm8903@1a {
};
};
pcie-controller {
status = "okay";
pci@1,0 {
status = "okay";
};
};
sound {
compatible = "ad,tegra-audio-wm8903-tec",
"nvidia,tegra-audio-wm8903";
......
arch/arm/boot/dts/tegra20-trimslice.dts
View file @ dccfd1e4
......@@ -302,7 +302,7 @@ rtc@56 {
};
pmc {
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
......@@ -310,6 +310,16 @@ pmc {
nvidia,sys-clock-req-active-high;
};
pcie-controller {
status = "okay";
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
pci@1,0 {
status = "okay";
};
};
usb@c5000000 {
status = "okay";
};
......@@ -410,10 +420,28 @@ vbus_reg: regulator@2 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 170 0>; /* PV2 */
gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
regulator-always-on;
regulator-boot-on;
};
pci_clk_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "pci_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
pci_vdd_reg: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "pci_vdd";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
};
};
sound {
......
arch/arm/boot/dts/tegra20-ventana.dts
View file @ dccfd1e4
......@@ -494,7 +494,7 @@ temperature-sensor@4c {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <100>;
nvidia,core-pwr-good-time = <3845 3845>;
......
arch/arm/boot/dts/tegra20-whistler.dts
View file @ dccfd1e4
......@@ -497,7 +497,7 @@ vrtc {
pmc {
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <1000>;
nvidia,core-pwr-good-time = <0 3845>;
......
arch/arm/boot/dts/tegra20.dtsi
View file @ dccfd1e4
......@@ -455,6 +455,61 @@ memory-controller@7000f400 {
#size-cells = <0>;
};
pcie-controller {
compatible = "nvidia,tegra20-pcie";
device_type = "pci";
reg = <0x80003000 0x00000800 /* PADS registers */
0x80003800 0x00000200 /* AFI registers */
0x90000000 0x10000000>; /* configuration space */
reg-names = "pads", "afi", "cs";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
interrupt-names = "intr", "msi";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */
0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
clocks = <&tegra_car TEGRA20_CLK_PEX>,
<&tegra_car TEGRA20_CLK_AFI>,
<&tegra_car TEGRA20_CLK_PCIE_XCLK>,
<&tegra_car TEGRA20_CLK_PLL_E>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e";
status = "disabled";
pci@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <2>;
};
pci@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <2>;
};
};
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
......
arch/arm/boot/dts/tegra30-beaver.dts
View file @ dccfd1e4
......@@ -10,6 +10,40 @@ memory {
reg = <0x80000000 0x7ff00000>;
};
pcie-controller {
status = "okay";
pex-clk-supply = <&sys_3v3_pexs_reg>;
vdd-supply = <&ldo1_reg>;
avdd-supply = <&ldo2_reg>;
pci@1,0 {
status = "okay";
nvidia,num-lanes = <2>;
};
pci@2,0 {
nvidia,num-lanes = <2>;
};
pci@3,0 {
status = "okay";
nvidia,num-lanes = <2>;
};
};
host1x {
hdmi {
status = "okay";
vdd-supply = <&sys_3v3_reg>;
pll-supply = <&vio_reg>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
nvidia,ddc-i2c-bus = <&hdmiddc>;
};
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
......@@ -76,6 +110,11 @@ dap2_fs_pa2 {
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
pex_l1_prsnt_n_pdd4 {
nvidia,pins = "pex_l1_prsnt_n_pdd4",
"pex_l1_clkreq_n_pdd6";
nvidia,pull = <2>;
};
sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <0>;
......@@ -85,6 +124,10 @@ sdio3 {
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
gpv {
nvidia,pins = "drive_gpv";
nvidia,pull-up-strength = <16>;
};
};
};
......@@ -107,7 +150,7 @@ i2c@7000c500 {
clock-frequency = <100000>;
};
i2c@7000c700 {
hdmiddc: i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
......@@ -262,7 +305,7 @@ i2s@70080400 {
pmc {
status = "okay";
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
......@@ -285,6 +328,15 @@ sdhci@78000600 {
non-removable;
};
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
status = "okay";
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -357,7 +409,7 @@ usb1_vbus_reg: regulator@4 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
......@@ -369,7 +421,7 @@ usb3_vbus_reg: regulator@5 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
......@@ -421,7 +473,9 @@ sound {
nvidia,audio-routing =
"Headphones", "HPOR",
"Headphones", "HPOL";
"Headphones", "HPOL",
"Mic Jack", "MICBIAS1",
"IN2P", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5640>;
......
arch/arm/boot/dts/tegra30-cardhu.dtsi
View file @ dccfd1e4
......@@ -31,6 +31,26 @@ memory {
reg = <0x80000000 0x40000000>;
};
pcie-controller {
status = "okay";
pex-clk-supply = <&pex_hvdd_3v3_reg>;
vdd-supply = <&ldo1_reg>;
avdd-supply = <&ldo2_reg>;
pci@1,0 {
nvidia,num-lanes = <4>;
};
pci@2,0 {
nvidia,num-lanes = <1>;
};
pci@3,0 {
status = "okay";
nvidia,num-lanes = <1>;
};
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
......@@ -173,19 +193,6 @@ wm8903: wm8903@1a {
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
......@@ -286,6 +293,26 @@ ldo8_reg: ldo8 {
};
};
};
nct1008 {
compatible = "onnn,nct1008";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
};
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
};
spi@7000da00 {
......@@ -307,7 +334,7 @@ i2s@70080400 {
pmc {
status = "okay";
nvidia,invert-interrupt;
nvidia,suspend-mode = <2>;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
......@@ -330,6 +357,15 @@ sdhci@78000600 {
non-removable;
};
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
status = "okay";
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
......
arch/arm/boot/dts/tegra30.dtsi
View file @ dccfd1e4
......@@ -16,6 +16,76 @@ aliases {
serial4 = &uarte;
};
pcie-controller {
compatible = "nvidia,tegra30-pcie";
device_type = "pci";
reg = <0x00003000 0x00000800 /* PADS registers */
0x00003800 0x00000200 /* AFI registers */
0x10000000 0x10000000>; /* configuration space */
reg-names = "pads", "afi", "cs";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
interrupt-names = "intr", "msi";
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */
0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
clocks = <&tegra_car TEGRA30_CLK_PCIE>,
<&tegra_car TEGRA30_CLK_AFI>,
<&tegra_car TEGRA30_CLK_PCIEX>,
<&tegra_car TEGRA30_CLK_PLL_E>,
<&tegra_car TEGRA30_CLK_CML0>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
status = "disabled";
pci@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <2>;
};
pci@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <2>;
};
pci@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
reg = <0x001800 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <2>;
};
};
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
......@@ -561,6 +631,92 @@ sdhci@78000600 {
status = "disabled";
};
usb@7d000000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>;
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
};
phy1: usb-phy@7d000000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <9>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
nvidia.xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
status = "disabled";
};
usb@7d004000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA30_CLK_USB2>;
nvidia,phy = <&phy2>;
status = "disabled";
};
phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d004000 0x4000>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA30_CLK_USB2>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>;
nvidia,phy = <&phy3>;
status = "disabled";
};
phy3: usb-phy@7d008000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
nvidia.xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
status = "disabled";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/u9540.dts deleted 100644 → 0
View file @ 8e73e367
/*
* Copyright 2012 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "dbx5x0.dtsi"
/ {
model = "ST-Ericsson U9540 platform with Device Tree";
compatible = "st-ericsson,u9540";
memory {
reg = <0x00000000 0x20000000>;
};
soc-u9500 {
uart@80120000 {
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
status = "okay";
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
cd-gpios = <&gpio7 6 0x4>; // 230
cd-inverted;
status = "okay";
};
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
};
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
};
};
};
arch/arm/boot/dts/zynq-7000.dtsi
View file @ dccfd1e4
......@@ -41,8 +41,8 @@ intc: interrupt-controller@f8f01000 {
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xF8F02000 0x1000>;
arm,data-latency = <2 3 2>;
arm,tag-latency = <2 3 2>;
arm,data-latency = <3 2 2>;
arm,tag-latency = <2 2 2>;
cache-unified;
cache-level = <2>;
};
......
arch/arm/mach-nomadik/Kconfig
View file @ dccfd1e4
......@@ -27,6 +27,7 @@ config MACH_NOMADIK_8815NHK
select NOMADIK_8815
select I2C
select I2C_ALGOBIT
select I2C_NOMADIK
endmenu
endif
......
arch/arm/mach-pxa/pxa-dt.c
View file @ dccfd1e4
......@@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL),
OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL),
OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", NULL),
OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL),
OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL),
OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL),
......
arch/arm/mach-shmobile/Kconfig
View file @ dccfd1e4
config ARCH_SHMOBILE_MULTI
bool "SH-Mobile Series" if ARCH_MULTI_V7
depends on MMU
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if LOCAL_TIMERS
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
if ARCH_SHMOBILE_MULTI
comment "SH-Mobile System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
comment "SH-Mobile Board Type"
config MACH_KZM9D_REFERENCE
bool "KZM9D board - Reference Device Tree Implementation"
depends on ARCH_EMEV2
select REGULATOR_FIXED_VOLTAGE if REGULATOR
---help---
Use reference implementation of KZM9D board support
which makes a greater use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
comment "SH-Mobile System Configuration"
endif
if ARCH_SHMOBILE
comment "SH-Mobile System Type"
......@@ -156,6 +194,18 @@ config MACH_KZM9D
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_KZM9D_REFERENCE
bool "KZM9D board - Reference Device Tree Implementation"
depends on ARCH_EMEV2
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
Use reference implementation of KZM9D board support
which makes a greater use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
......@@ -186,6 +236,15 @@ config CPU_HAS_INTEVT
bool
default y
config SH_CLK_CPG
bool
source "drivers/sh/Kconfig"
endif
if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
menu "Timer and clock configuration"
config SHMOBILE_TIMER_HZ
......@@ -220,9 +279,4 @@ config EM_TIMER_STI
endmenu
config SH_CLK_CPG
bool
source "drivers/sh/Kconfig"
endif
arch/arm/mach-shmobile/Makefile
View file @ dccfd1e4
......@@ -2,18 +2,33 @@
# Makefile for the linux kernel.
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
# Common objects
obj-y := timer.o console.o clock.o
obj-y := timer.o console.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o intc-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
# Clock objects
ifndef CONFIG_COMMON_CLK
obj-y += clock.o
obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
endif
# SMP objects
smp-y := platsmp.o headsmp.o
......@@ -46,6 +61,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
......
arch/arm/mach-shmobile/Makefile.boot
View file @ dccfd1e4
......@@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
......
arch/arm/mach-shmobile/board-armadillo800eva-reference.c
View file @ dccfd1e4
......@@ -24,7 +24,6 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
#include <mach/common.h>
#include <mach/r8a7740.h>
#include <asm/mach/arch.h>
......@@ -119,12 +118,6 @@
* usbhsf_power_ctrl()
*/
static const struct pinctrl_map eva_pinctrl_map[] = {
/* SCIFA1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
"scifa1_data", "scifa1"),
};
static void __init eva_clock_init(void)
{
struct clk *system = clk_get(NULL, "system_clk");
......@@ -165,27 +158,18 @@ static void __init eva_clock_init(void)
*/
static void __init eva_init(void)
{
r8a7740_clock_init(MD_CK0 | MD_CK2);
eva_clock_init();
pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
r8a7740_pinmux_init();
r8a7740_meram_workaround();
/*
* Touchscreen
* TODO: Move reset GPIO over to .dts when we can reference it
*/
gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
r8a7740_add_standard_devices_dt();
r8a7740_pm_init();
}
......
arch/arm/mach-shmobile/board-kzm9d-reference.c 0 → 100644
View file @ dccfd1e4
/*
* kzm9d board support - Reference DT implementation
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/of_platform.h>
#include <mach/emev2.h>
#include <mach/common.h>
#include <asm/mach/arch.h>
static void __init kzm9d_add_standard_devices(void)
{
if (!IS_ENABLED(CONFIG_COMMON_CLK))
emev2_clock_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *kzm9d_boards_compat_dt[] __initdata = {
"renesas,kzm9d-reference",
NULL,
};
DT_MACHINE_START(KZM9D_DT, "kzm9d")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_init_delay,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-kzm9d.c
View file @ dccfd1e4
......@@ -86,8 +86,6 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = emev2_init_irq,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = kzm9d_boards_compat_dt,
......
arch/arm/mach-shmobile/board-kzm9g-reference.c
View file @ dccfd1e4
......@@ -21,66 +21,19 @@
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
};
static const struct pinctrl_map kzm_pinctrl_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
"i2c3_1", "i2c3"),
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"mmc0_ctrl_0", "mmc0"),
PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"PORT279", pin_pullup_conf),
PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA4 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
"scifa4_data", "scifa4"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
"scifa4_ctrl", "scifa4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
"sdhi0_wp", "sdhi0"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
"sdhi2_ctrl", "sdhi2"),
};
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
sh73a0_pinmux_init();
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
......
arch/arm/mach-shmobile/board-marzen-reference.c
View file @ dccfd1e4
......@@ -19,42 +19,14 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/pinctrl/machine.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* SCIF2 (CN18: DEBUG0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
"scif4_data", "scif4"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_wp", "sdhi0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"intc_irq1_b", "intc"),
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"lbsc_ex_cs0", "lbsc"),
};
static void __init marzen_init(void)
{
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
r8a7779_pinmux_init();
r8a7779_add_standard_devices_dt();
}
......
arch/arm/mach-shmobile/include/mach/emev2.h
View file @ dccfd1e4
......@@ -2,7 +2,6 @@
#define __ASM_EMEV2_H__
extern void emev2_map_io(void);
extern void emev2_init_irq(void);
extern void emev2_init_delay(void);
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
......
arch/arm/mach-shmobile/setup-emev2.c
View file @ dccfd1e4
......@@ -38,13 +38,6 @@
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
/* 128K entity map for 0xe0100000 (SMU) */
{
.virtual = 0xe0100000,
.pfn = __phys_to_pfn(0xe0100000),
.length = SZ_128K,
.type = MT_DEVICE
},
/* 2M mapping for SCU + L2 controller */
{
.virtual = 0xf0000000,
......@@ -182,6 +175,7 @@ static struct resource pmu_resources[] = {
void __init emev2_add_standard_devices(void)
{
if (!IS_ENABLED(CONFIG_COMMON_CLK))
emev2_clock_init();
emev2_register_uart(0);
......@@ -202,20 +196,6 @@ void __init emev2_init_delay(void)
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
void __init emev2_init_irq(void)
{
void __iomem *gic_dist_base;
void __iomem *gic_cpu_base;
/* Static mappings, never released */
gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
BUG_ON(!gic_dist_base || !gic_cpu_base);
/* Use GIC to handle interrupts */
gic_init(0, 29, gic_dist_base, gic_cpu_base);
}
#ifdef CONFIG_USE_OF
static const char *emev2_boards_compat_dt[] __initdata = {
......@@ -225,8 +205,8 @@ static const char *emev2_boards_compat_dt[] __initdata = {
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
......
arch/arm/mach-shmobile/smp-emev2.c
View file @ dccfd1e4
......@@ -38,9 +38,12 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
/* setup EMEV2 specific SCU base, enable */
shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
scu_enable(shmobile_scu_base);
/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
emev2_clock_init(); /* need ioremapped SMU */
emev2_set_boot_vector(__pa(shmobile_boot_vector));
shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
shmobile_boot_arg = (unsigned long)shmobile_scu_base;
......@@ -49,21 +52,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
}
static void __init emev2_smp_init_cpus(void)
{
unsigned int ncores;
/* setup EMEV2 specific SCU base */
shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
emev2_clock_init(); /* need ioremapped SMU */
ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
shmobile_smp_init_cpus(ncores);
}
struct smp_operations emev2_smp_ops __initdata = {
.smp_init_cpus = emev2_smp_init_cpus,
.smp_prepare_cpus = emev2_smp_prepare_cpus,
.smp_boot_secondary = emev2_boot_secondary,
};
arch/arm/mach-ux500/cpu-db8500.c
View file @ dccfd1e4
......@@ -223,10 +223,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
......
drivers/input/serio/altera_ps2.c
View file @ dccfd1e4
......@@ -176,6 +176,7 @@ static int altera_ps2_remove(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id altera_ps2_match[] = {
{ .compatible = "ALTR,ps2-1.0", },
{ .compatible = "altr,ps2-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, altera_ps2_match);
......
drivers/spi/spi-altera.c
View file @ dccfd1e4
......@@ -276,6 +276,7 @@ static int altera_spi_remove(struct platform_device *dev)
#ifdef CONFIG_OF
static const struct of_device_id altera_spi_match[] = {
{ .compatible = "ALTR,spi-1.0", },
{ .compatible = "altr,spi-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, altera_spi_match);
......
drivers/tty/serial/altera_jtaguart.c
View file @ dccfd1e4
......@@ -473,6 +473,7 @@ static int altera_jtaguart_remove(struct platform_device *pdev)
#ifdef CONFIG_OF
static struct of_device_id altera_jtaguart_match[] = {
{ .compatible = "ALTR,juart-1.0", },
{ .compatible = "altr,juart-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
......
drivers/tty/serial/altera_uart.c
View file @ dccfd1e4
......@@ -615,6 +615,7 @@ static int altera_uart_remove(struct platform_device *pdev)
#ifdef CONFIG_OF
static struct of_device_id altera_uart_match[] = {
{ .compatible = "ALTR,uart-1.0", },
{ .compatible = "altr,uart-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, altera_uart_match);
......
include/dt-bindings/pinctrl/nomadik.h 0 → 100644
View file @ dccfd1e4
/*
* nomadik.h
*
* Copyright (C) ST-Ericsson SA 2013
* Author: Gabriel Fernandez <gabriel.fernandez@st.com> for ST-Ericsson.
* License terms: GNU General Public License (GPL), version 2
*/
#define INPUT_NOPULL 0
#define INPUT_PULLUP 1
#define INPUT_PULLDOWN 2
#define OUTPUT_LOW 0
#define OUTPUT_HIGH 1
#define DIR_OUTPUT 2
#define SLPM_DISABLED 0
#define SLPM_ENABLED 1
#define SLPM_INPUT_NOPULL 0
#define SLPM_INPUT_PULLUP 1
#define SLPM_INPUT_PULLDOWN 2
#define SLPM_DIR_INPUT 3
#define SLPM_OUTPUT_LOW 0
#define SLPM_OUTPUT_HIGH 1
#define SLPM_DIR_OUTPUT 2
#define SLPM_WAKEUP_DISABLE 0
#define SLPM_WAKEUP_ENABLE 1
#define GPIOMODE_DISABLED 0
#define GPIOMODE_ENABLED 1
#define SLPM_PDIS_DISABLED 0
#define SLPM_PDIS_ENABLED 1
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7