dm vdo: remove internal ticket references

Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

drivers/md/dm-vdo/block-map.c

@@ -542,7 +542,7 @@ static unsigned int distribute_page_over_waitq(struct page_info *info,
 
 	/*
 	 * Increment the busy count once for each pending completion so that this page does not
-	 * stop being busy until all completions have been processed (VDO-83).
+	 * stop being busy until all completions have been processed.
 	 */
 	info->busy += num_pages;
 
@@ -1097,9 +1097,9 @@ static void write_pages(struct vdo_completion *flush_completion)
 	struct vdo_page_cache *cache = ((struct page_info *) flush_completion->parent)->cache;
 
 	/*
-	 * We need to cache these two values on the stack since in the error case below, it is
-	 * possible for the last page info to cause the page cache to get freed. Hence once we
-	 * launch the last page, it may be unsafe to dereference the cache [VDO-4724].
+	 * We need to cache these two values on the stack since it is possible for the last
+	 * page info to cause the page cache to get freed. Hence once we launch the last page,
+	 * it may be unsafe to dereference the cache.
 	 */
 	bool has_unflushed_pages = (cache->pages_to_flush > 0);
 	page_count_t pages_in_flush = cache->pages_in_flush;

drivers/md/dm-vdo/data-vio.c

@@ -453,10 +453,11 @@ static void attempt_logical_block_lock(struct vdo_completion *completion)
 
 	/*
 	 * If the new request is a pure read request (not read-modify-write) and the lock_holder is
-	 * writing and has received an allocation (VDO-2683), service the read request immediately
-	 * by copying data from the lock_holder to avoid having to flush the write out of the
-	 * packer just to prevent the read from waiting indefinitely. If the lock_holder does not
-	 * yet have an allocation, prevent it from blocking in the packer and wait on it.
+	 * writing and has received an allocation, service the read request immediately by copying
+	 * data from the lock_holder to avoid having to flush the write out of the packer just to
+	 * prevent the read from waiting indefinitely. If the lock_holder does not yet have an
+	 * allocation, prevent it from blocking in the packer and wait on it. This is necessary in
+	 * order to prevent returning data that may not have actually been written.
 	 */
 	if (!data_vio->write && READ_ONCE(lock_holder->allocation_succeeded)) {
 		copy_to_bio(data_vio->user_bio, lock_holder->vio.data + data_vio->offset);

drivers/md/dm-vdo/dm-vdo-target.c

@@ -947,11 +947,9 @@ static void vdo_io_hints(struct dm_target *ti, struct queue_limits *limits)
 	 *
 	 * The value 1024 is the largest usable value on HD systems. A 2048 sector discard on a
 	 * busy HD system takes 31 seconds. We should use a value no higher than 1024, which takes
-	 * 15 to 16 seconds on a busy HD system.
-	 *
-	 * But using large values results in 120 second blocked task warnings in /var/log/kern.log.
-	 * In order to avoid these warnings, we choose to use the smallest reasonable value.  See
-	 * VDO-3062 and VDO-3087.
+	 * 15 to 16 seconds on a busy HD system. However, using large values results in 120 second
+	 * blocked task warnings in kernel logs. In order to avoid these warnings, we choose to
+	 * use the smallest reasonable value.
 	 *
 	 * The value is displayed in sysfs, and also used by dm-thin to determine whether to pass
 	 * down discards. The block layer splits large discards on this boundary when this is set.

drivers/md/dm-vdo/memory-alloc.c

@@ -235,8 +235,8 @@ int uds_allocate_memory(size_t size, size_t align, const char *what, void *ptr)
 		if (p == NULL) {
 			/*
 			 * It is possible for kmalloc to fail to allocate memory because there is
-			 * no page available (see VDO-3688). A short sleep may allow the page
-			 * reclaimer to free a page.
+			 * no page available. A short sleep may allow the page reclaimer to
+			 * free a page.
 			 */
 			fsleep(1000);
 			p = kmalloc(size, gfp_flags);
@@ -251,8 +251,8 @@ int uds_allocate_memory(size_t size, size_t align, const char *what, void *ptr)
 		    UDS_SUCCESS) {
 			/*
 			 * It is possible for __vmalloc to fail to allocate memory because there
-			 * are no pages available (see VDO-3661). A short sleep may allow the page
-			 * reclaimer to free enough pages for a small allocation.
+			 * are no pages available. A short sleep may allow the page reclaimer
+			 * to free enough pages for a small allocation.
 			 *
 			 * For larger allocations, the page_alloc code is racing against the page
 			 * reclaimer. If the page reclaimer can stay ahead of page_alloc, the

drivers/md/dm-vdo/packer.c

@@ -595,15 +595,13 @@ void vdo_attempt_packing(struct data_vio *data_vio)
 	}
 
 	/*
-	 * The check of may_vio_block_in_packer() here will set the data_vio's compression state to
-	 * VIO_PACKING if the data_vio is allowed to be compressed (if it has already been
-	 * canceled, we'll fall out here). Once the data_vio is in the VIO_PACKING state, it must
-	 * be guaranteed to be put in a bin before any more requests can be processed by the packer
-	 * thread. Otherwise, a canceling data_vio could attempt to remove the canceled data_vio
-	 * from the packer and fail to rendezvous with it (VDO-2809). We must also make sure that
-	 * we will actually bin the data_vio and not give up on it as being larger than the space
-	 * used in the fullest bin. Hence we must call select_bin() before calling
-	 * may_vio_block_in_packer() (VDO-2826).
+	 * The advance_data_vio_compression_stage() check here verifies that the data_vio is
+	 * allowed to be compressed (if it has already been canceled, we'll fall out here). Once
+	 * the data_vio is in the DATA_VIO_PACKING state, it must be guaranteed to be put in a bin
+	 * before any more requests can be processed by the packer thread. Otherwise, a canceling
+	 * data_vio could attempt to remove the canceled data_vio from the packer and fail to
+	 * rendezvous with it. Thus, we must call select_bin() first to ensure that we will
+	 * actually add the data_vio to a bin before advancing to the DATA_VIO_PACKING stage.
 	 */
 	bin = select_bin(packer, data_vio);
 	if ((bin == NULL) ||

drivers/md/dm-vdo/packer.h

@@ -58,7 +58,7 @@ struct compressed_block {
  *
  * There is one special bin which is used to hold data_vios which have been canceled and removed
  * from their bin by the packer. These data_vios need to wait for the canceller to rendezvous with
- * them (VDO-2809) and so they sit in this special bin.
+ * them and so they sit in this special bin.
  */
 struct packer_bin {
 	/* List links for packer.packer_bins */

drivers/md/dm-vdo/repair.c

@@ -1504,8 +1504,8 @@ static int extract_new_mappings(struct repair_completion *repair)
 static noinline int compute_usages(struct repair_completion *repair)
 {
 	/*
-	 * VDO-5182: function is declared noinline to avoid what is likely a spurious valgrind
-	 * error about this structure being uninitialized.
+	 * This function is declared noinline to avoid a spurious valgrind error regarding the
+	 * following structure being uninitialized.
 	 */
 	struct recovery_point recovery_point = {
 		.sequence_number = repair->tail,

drivers/md/dm-vdo/slab-depot.c

@@ -334,7 +334,11 @@ static void launch_write(struct slab_summary_block *block)
 
 	/*
 	 * Flush before writing to ensure that the slab journal tail blocks and reference updates
-	 * covered by this summary update are stable (VDO-2332).
+	 * covered by this summary update are stable. Otherwise, a subsequent recovery could
+	 * encounter a slab summary update that refers to a slab journal tail block that has not
+	 * actually been written. In such cases, the slab journal referenced will be treated as
+	 * empty, causing any data within the slab which predates the existing recovery journal
+	 * entries to be lost.
 	 */
 	pbn = (depot->summary_origin +
 	       (VDO_SLAB_SUMMARY_BLOCKS_PER_ZONE * allocator->zone_number) +
@@ -499,7 +503,7 @@ static void reap_slab_journal(struct slab_journal *journal)
 	 * journal block writes can be issued while previous slab summary updates have not yet been
 	 * made. Even though those slab journal block writes will be ignored if the slab summary
 	 * update is not persisted, they may still overwrite the to-be-reaped slab journal block
-	 * resulting in a loss of reference count updates (VDO-2912).
+	 * resulting in a loss of reference count updates.
 	 */
 	journal->flush_waiter.callback = flush_for_reaping;
 	acquire_vio_from_pool(journal->slab->allocator->vio_pool,
@@ -770,7 +774,8 @@ static void write_slab_journal_block(struct vdo_waiter *waiter, void *context)
 
 	/*
 	 * This block won't be read in recovery until the slab summary is updated to refer to it.
-	 * The slab summary update does a flush which is sufficient to protect us from VDO-2331.
+	 * The slab summary update does a flush which is sufficient to protect us from corruption
+	 * due to out of order slab journal, reference block, or block map writes.
 	 */
 	vdo_submit_metadata_vio(uds_forget(vio), block_number, write_slab_journal_endio,
 				complete_write, REQ_OP_WRITE);
@@ -1201,7 +1206,8 @@ static void write_reference_block(struct vdo_waiter *waiter, void *context)
 
 	/*
 	 * Flush before writing to ensure that the recovery journal and slab journal entries which
-	 * cover this reference update are stable (VDO-2331).
+	 * cover this reference update are stable. This prevents data corruption that can be caused
+	 * by out of order writes.
 	 */
 	WRITE_ONCE(block->slab->allocator->ref_counts_statistics.blocks_written,
 		   block->slab->allocator->ref_counts_statistics.blocks_written + 1);
@@ -1775,7 +1781,7 @@ static void add_entries(struct slab_journal *journal)
 		    (journal->slab->status == VDO_SLAB_REBUILDING)) {
 			/*
 			 * Don't add entries while rebuilding or while a partial write is
-			 * outstanding (VDO-2399).
+			 * outstanding, as it could result in reference count corruption.
 			 */
 			break;
 		}

drivers/md/dm-vdo/sparse-cache.c

@@ -191,7 +191,7 @@ static inline void __down(struct semaphore *semaphore)
 		 * happens, sleep briefly to avoid keeping the CPU locked up in
 		 * this loop. We could just call cond_resched, but then we'd
 		 * still keep consuming CPU time slices and swamp other threads
-		 * trying to do computational work. [VDO-4980]
+		 * trying to do computational work.
 		 */
 		fsleep(1000);
 	}

drivers/md/dm-vdo/vdo.c

@@ -544,7 +544,7 @@ int vdo_make(unsigned int instance, struct device_config *config, char **reason,
 	int result;
 	struct vdo *vdo;
 
-	/* VDO-3769 - Set a generic reason so we don't ever return garbage. */
+	/* Initialize with a generic failure reason to prevent returning garbage. */
 	*reason = "Unspecified error";
 
 	result = uds_allocate(1, struct vdo, __func__, &vdo);

drivers/md/dm-vdo/vio.c

@@ -123,7 +123,6 @@ int create_multi_block_metadata_vio(struct vdo *vdo, enum vio_type vio_type,
 	struct vio *vio;
 	int result;
 
-	/* If struct vio grows past 256 bytes, we'll lose benefits of VDOSTORY-176. */
 	BUILD_BUG_ON(sizeof(struct vio) > 256);
 
 	/*