Merge tag 'amlogic-dt64-redo' of...

Merge tag 'amlogic-dt64-redo' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic 64-bit DT updates for v4.12
- pinctrl: new pins for audio
- clocks: more clocks exposed for GFX, audio
- new board: Khadas Vim (S905X)
- new board: HwaCom AmazeTV (S905X)
- ethernet phy: add GPIO resets

* tag 'amlogic-dt64-redo' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (41 commits)
  ARM64: dts: meson-gx: Add support for HDMI output
  ARM64: dts: meson-gx: Add shared CMA dma memory pool
  ARM64: dts: meson-gxbb-odroidc2: Enable SARADC node
  dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
  clk: meson-gxbb: Expose GP0 dt-bindings clock id
  clk: meson-gxbb: Add MALI clock IDS
  dt-bindings: clk: gxbb: expose i2s output clock gates
  ARM64: dts: meson-gxl: add spdif output pins
  ARM64: dts: meson-gxl: add i2s output pins
  ARM64: dts: meson-gxbb: add spdif output pins
  ARM64: dts: meson-gxbb: add i2s output pins
  ARM64: dts: meson-gxbb: Add USB Hub GPIO hog
  ARM: dts: meson8b: Add gpio-ranges properties
  ARM: dts: meson8: Add gpio-ranges properties
  ARM64: dts: meson-gxl: Add gpio-ranges properties
  ARM64: dts: meson-gxbb: Add gpio-ranges properties
  ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL
  ARM64: dts: meson-gxl: Add missing pinctrl pins groups
  ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
  ARM64: dts: meson-gx: empty line cleanup
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -43,8 +43,11 @@ Board compatible values:
   - "wetek,hub" (Meson gxbb)
   - "wetek,play2" (Meson gxbb)
   - "amlogic,p212" (Meson gxl s905x)
+  - "khadas,vim" (Meson gxl s905x)
+
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
   - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -5,7 +5,8 @@ controllers within the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-clkc"
+- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
+	      or "amlogic,gxl-clkc" for GXL and GXM SoC.
 - reg: physical base address of the clock controller and length of memory
        mapped region.
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -136,6 +136,7 @@ holt	Holt Integrated Circuits, Inc.
 honeywell	Honeywell
 hp	Hewlett Packard
 holtek	Holtek Semiconductor, Inc.
+hwacom	HwaCom Systems Inc.
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -159,6 +160,7 @@ jedec	JEDEC Solid State Technology Association
 karo	Ka-Ro electronics GmbH
 keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
+khadas	Khadas
 kinetic Kinetic Technologies
 kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation

arch/arm/boot/dts/meson8.dtsi

@@ -106,6 +106,7 @@ gpio: banks@c11080b0 {
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
 		};
 
 		spi_nor_pins: nor {
@@ -148,6 +149,7 @@ gpio_ao: ao-bank@c1108030 {
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 120 16>;
 		};
 
 		uart_ao_a_pins: uart_ao_a {

arch/arm/boot/dts/meson8b.dtsi

@@ -198,6 +198,7 @@ gpio: banks@c11080b0 {
 				reg-names = "mux", "pull", "pull-enable", "gpio";
 				gpio-controller;
 				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl_cbus 0 0 130>;
 			};
 		};
 
@@ -215,6 +216,7 @@ gpio_ao: ao-bank@c1108030 {
 				reg-names = "mux", "pull", "gpio";
 				gpio-controller;
 				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl_aobus 0 130 16>;
 			};
 
 			uart_ao_a_pins: uart_ao_a {

arch/arm64/boot/dts/amlogic/Makefile

@@ -7,9 +7,11 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -98,6 +98,27 @@ sdio_pwrseq: sdio-pwrseq {
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -188,3 +209,21 @@ &pwm_ef {
 &ethmac {
 	status = "okay";
 };
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -71,6 +71,14 @@ secmon_reserved: secmon@10000000 {
 			reg = <0x0 0x10000000 0x0 0x200000>;
 			no-map;
 		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0xbc00000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
 	};
 
 	cpus {
@@ -233,7 +241,7 @@ uart_B: serial@84dc {
 			};
 
 			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x08500 0x0 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -279,7 +287,7 @@ uart_C: serial@8700 {
 			};
 
 			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087c0 0x0 0x20>;
 				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -288,7 +296,7 @@ i2c_B: i2c@87c0 {
 			};
 
 			i2c_C: i2c@87e0 {
-				compatible = "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087e0 0x0 0x20>;
 				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -296,6 +304,14 @@ i2c_C: i2c@87e0 {
 				status = "disabled";
 			};
 
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			watchdog@98d0 {
 				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0x098d0 0x0 0x10>;
@@ -317,7 +333,7 @@ gic: interrupt-controller@c4301000 {
 		};
 
 		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
 			reg = <0x0 0xc8000000 0x0 0x14000>;
 
 			#address-cells = <1>;
@@ -325,12 +341,12 @@ sram: sram@c8000000 {
 			ranges = <0 0x0 0xc8000000 0x14000>;
 
 			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
+				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
 			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
+				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
 		};
@@ -342,6 +358,13 @@ aobus: aobus@c8100000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 
+			clkc_AO: clock-controller@040 {
+				compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
+				reg = <0x0 0x00040 0x0 0x4>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x004c0 0x0 0x14>;
@@ -358,6 +381,15 @@ uart_AO_B: serial@4e0 {
 				status = "disabled";
 			};
 
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			pwm_AO_ab: pwm@550 {
 				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 				reg = <0x0 0x00550 0x0 0x10>;
@@ -366,7 +398,7 @@ pwm_AO_ab: pwm@550 {
 			};
 
 			ir: ir@580 {
-				compatible = "amlogic,meson-gxbb-ir";
+				compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
 				reg = <0x0 0x00580 0x0 0x40>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -386,7 +418,6 @@ rng {
 			};
 		};
 
-
 		hiubus: hiubus@c883c000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc883c000 0x0 0x2000>;
@@ -410,7 +441,6 @@ ethmac: ethernet@c9410000 {
 			       0x0 0xc8834540 0x0 0x4>;
 			interrupts = <0 8 1>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
 			status = "disabled";
 		};
 
@@ -457,6 +487,38 @@ vpu: vpu@d0100000 {
 			cvbs_vdac_port: port@0 {
 				reg = <0>;
 			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		hdmi_tx: hdmi-tx@c883a000 {
+			compatible = "amlogic,meson-gx-dw-hdmi";
+			reg = <0x0 0xc883a000 0x0 0x1c>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			/* VPU VENC Input */
+			hdmi_tx_venc_port: port@0 {
+				reg = <0>;
+
+				hdmi_tx_in: endpoint {
+					remote-endpoint = <&hdmi_tx_out>;
+				};
+			};
+
+			/* TMDS Output */
+			hdmi_tx_tmds_port: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -152,6 +152,17 @@ cvbs_connector_in: endpoint {
 			};
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 &uart_AO {
@@ -164,7 +175,24 @@ &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rmii_pins>;
 	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
 	phy-mode = "rmii";
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+		};
+	};
 };
 
 &ir {
@@ -245,3 +273,15 @@ cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -96,7 +96,7 @@ tflash_vdd: regulator-tflash_vdd {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
@@ -152,6 +152,13 @@ &ethmac {
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	amlogic,tx-delay-ns = <2>;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -165,6 +172,57 @@ eth_phy0: ethernet-phy@0 {
 	};
 };
 
+&pinctrl_aobus {
+	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
+			  "USB HUB nRESET", "USB OTG Power En",
+			  "J7 Header Pin2", "IR In", "J7 Header Pin4",
+			  "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
+			  "HDMI CEC", "SYS LED";
+};
+
+&pinctrl_periphs {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "", "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "PWM D", "PWM B",
+			  /* Bank GPIOY */
+			  "Revision Bit0", "Revision Bit1", "",
+			  "J2 Header Pin35", "", "", "", "J2 Header Pin36",
+			  "J2 Header Pin31", "", "", "", "TF VDD En",
+			  "J2 Header Pin32", "J2 Header Pin26", "", "",
+			  /* Bank GPIOX */
+			  "J2 Header Pin29", "J2 Header Pin24",
+			  "J2 Header Pin23", "J2 Header Pin22",
+			  "J2 Header Pin21", "J2 Header Pin18",
+			  "J2 Header Pin33", "J2 Header Pin19",
+			  "J2 Header Pin16", "J2 Header Pin15",
+			  "J2 Header Pin12", "J2 Header Pin13",
+			  "J2 Header Pin8", "J2 Header Pin10",
+			  "", "", "", "", "",
+			  "J2 Header Pin11", "", "J2 Header Pin7",
+			  /* Bank GPIOCLK */
+			  "", "", "", "",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
@@ -177,6 +235,21 @@ &i2c_A {
 	pinctrl-names = "default";
 };
 
+&gpio_ao {
+	/*
+	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
 &usb0_phy {
 	status = "okay";
 	phy-supply = <&usb_otg_pwr>;
@@ -194,6 +267,11 @@ &usb1 {
 	status = "okay";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc1v8>;
+};
+
 /* SD */
 &sd_emmc_b {
 	status = "okay";

arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts

@@ -96,6 +96,31 @@ button-menu {
 	};
 };
 
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@3 {
+			/* Micrel KSZ9031 (0x00221620) */
+			reg = <3>;
+		};
+	};
+};
+
 &i2c_B {
 	status = "okay";
 	pinctrl-0 = <&i2c_b_pins>;

arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts

@@ -50,3 +50,14 @@ / {
 	compatible = "amlogic,p201", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P201 Development Board";
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -135,6 +135,17 @@ cvbs_connector_in: endpoint {
 			};
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -144,12 +155,6 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-};
-
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
@@ -250,3 +255,15 @@ cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -115,7 +115,6 @@ &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
-
 };
 
 &ir {
@@ -128,6 +127,26 @@ &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+		};
+	};
 };
 
 &usb0_phy {

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

@@ -64,3 +64,29 @@ cvbs-connector {
 		status = "disabled";
 	};
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+		};
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

@@ -87,6 +87,32 @@ button@0 {
 	};
 };
 
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+		};
+	};
+};
+
 &i2c_A {
 	status = "okay";
 	pinctrl-0 = <&i2c_a_pins>;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -97,17 +97,6 @@ usb1: usb@c9100000 {
 	};
 };
 
-&cbus {
-	spifc: spi@8c80 {
-		compatible = "amlogic,meson-gxbb-spifc";
-		reg = <0x0 0x08c80 0x0 0x80>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clkc CLKID_SPI>;
-		status = "disabled";
-	};
-};
-
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
@@ -129,6 +118,7 @@ gpio_ao: bank@14 {
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
 		};
 
 		uart_ao_a_pins: uart_ao_a {
@@ -203,30 +193,62 @@ mux {
 				function = "pwm_ao_b";
 			};
 		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out_ao";
+			};
 		};
 
-	clkc_AO: clock-controller@040 {
-		compatible = "amlogic,gxbb-aoclkc";
-		reg = <0x0 0x00040 0x0 0x4>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out_ao";
+			};
 		};
 
-	pwm_ab_AO: pwm@550 {
-		compatible = "amlogic,meson-gxbb-pwm";
-		reg = <0x0 0x0550 0x0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out_ao";
+			};
 		};
 
-	i2c_AO: i2c@500 {
-		compatible = "amlogic,meson-gxbb-i2c";
-		reg = <0x0 0x500 0x0 0x20>;
-		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&clkc CLKID_AO_I2C>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
+		i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_out_ao";
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+			};
+		};
+
+		spdif_out_ao_13_pins: spdif_out_ao_13 {
+			mux {
+				groups = "spdif_out_ao_13";
+				function = "spdif_out_ao";
+			};
+		};
 	};
 };
 
@@ -245,6 +267,7 @@ gpio: bank@4b0 {
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 14 120>;
 		};
 
 		emmc_pins: emmc {
@@ -467,6 +490,34 @@ mux {
 				function = "hdmi_i2c";
 			};
 		};
+
+		i2sout_ch23_y_pins: i2sout_ch23_y {
+			mux {
+				groups = "i2sout_ch23_y";
+				function = "i2s_out";
+			};
+		};
+
+		i2sout_ch45_y_pins: i2sout_ch45_y {
+			mux {
+				groups = "i2sout_ch45_y";
+				function = "i2s_out";
+			};
+		};
+
+		i2sout_ch67_y_pins: i2sout_ch67_y {
+			mux {
+				groups = "i2sout_ch67_y";
+				function = "i2s_out";
+			};
+		};
+
+		spdif_out_y_pins: spdif_out_y {
+			mux {
+				groups = "spdif_out_y";
+				function = "spdif_out";
+			};
+		};
 	};
 };
 
@@ -478,10 +529,51 @@ clkc: clock-controller@0 {
 	};
 };
 
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
 &i2c_B {
 	clocks = <&clkc CLKID_I2C>;
 };
@@ -521,6 +613,22 @@ &sd_emmc_c {
 	clock-names = "core", "clkin0", "clkin1";
 };
 
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
 };
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi

+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts

@@ -43,12 +43,47 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+
 #include "meson-gxl-s905d.dtsi"
 #include "meson-gx-p23x-q20x.dtsi"
 
 / {
 	compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
 	model = "Amlogic Meson GXL (S905D) P230 Development Board";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 };
 
 /* P230 has exclusive choice between internal or external PHY */
@@ -59,6 +94,8 @@ &ethmac {
 	/* Select external PHY by default */
 	phy-handle = <&external_phy>;
 
+	amlogic,tx-delay-ns = <2>;
+
 	/* External PHY reset is shared with internal PHY Led signals */
 	snps,reset-gpio = <&gpio GPIOZ_14 0>;
 	snps,reset-delays-us = <0 10000 1000000>;
@@ -75,3 +112,8 @@ external_phy: ethernet-phy@0 {
 		max-speed = <1000>;
 	};
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi

@@ -42,6 +42,7 @@
  */
 
 #include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
 
 / {
 	compatible = "amlogic,s905d", "amlogic,meson-gxl";

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Hwacom AmazeTV (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0
+			  3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Khadas VIM";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	aliases {
+		serial2 = &uart_AO_B;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		power {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		/* has to be enabled manually when a battery is connected: */
+		status = "disabled";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-geekbox";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+};
+
+&sd_emmc_a {
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -127,6 +127,17 @@ cvbs_connector_in: endpoint {
 			};
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 &uart_AO {
@@ -219,3 +230,15 @@ cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts

@@ -43,23 +43,26 @@
 
 /dts-v1/;
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s905x-p212.dtsi"
 
 / {
 	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
 	model = "Amlogic Meson GXL (S905X) P212 Development Board";
 
-	aliases {
-		serial0 = &uart_AO;
-	};
+	cvbs-connector {
+		compatible = "composite-video-connector";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
 		};
+	};
+};
 
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
 

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi

+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ *   Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi

@@ -42,6 +42,7 @@
  */
 
 #include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
 
 / {
 	compatible = "amlogic,s905x", "amlogic,meson-gxl";

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -44,6 +44,7 @@
 #include "meson-gx.dtsi"
 #include <dt-bindings/clock/gxbb-clkc.h>
 #include <dt-bindings/gpio/meson-gxl-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 
 / {
 	compatible = "amlogic,meson-gxl";
@@ -79,6 +80,7 @@ gpio_ao: bank@14 {
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
 		};
 
 		uart_ao_a_pins: uart_ao_a {
@@ -103,6 +105,13 @@ mux {
 			};
 		};
 
+		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
+			mux {
+				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
+				function = "uart_ao_b";
+			};
+		};
+
 		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
 			mux {
 				groups = "uart_cts_ao_b",
@@ -118,12 +127,69 @@ mux {
 			};
 		};
 
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a";
+			};
+		};
+
+		pwm_ao_a_8_pins: pwm_ao_a_8 {
+			mux {
+				groups = "pwm_ao_a_8";
+				function = "pwm_ao_a";
+			};
+		};
+
 		pwm_ao_b_pins: pwm_ao_b {
 			mux {
 				groups = "pwm_ao_b";
 				function = "pwm_ao_b";
 			};
 		};
+
+		pwm_ao_b_6_pins: pwm_ao_b_6 {
+			mux {
+				groups = "pwm_ao_b_6";
+				function = "pwm_ao_b";
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+			};
+		};
+
+		spdif_out_ao_9_pins: spdif_out_ao_9 {
+			mux {
+				groups = "spdif_out_ao_9";
+				function = "spdif_out_ao";
+			};
+		};
 	};
 };
 
@@ -142,6 +208,7 @@ gpio: bank@4b0 {
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 14 101>;
 		};
 
 		emmc_pins: emmc {
@@ -154,6 +221,16 @@ mux {
 			};
 		};
 
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+			};
+		};
+
 		sdcard_pins: sdcard {
 			mux {
 				groups = "sdcard_d0",
@@ -277,6 +354,34 @@ mux {
 			};
 		};
 
+		pwm_a_pins: pwm_a {
+			mux {
+				groups = "pwm_a";
+				function = "pwm_a";
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+			};
+		};
+
+		pwm_c_pins: pwm_c {
+			mux {
+				groups = "pwm_c";
+				function = "pwm_c";
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+			};
+		};
+
 		pwm_e_pins: pwm_e {
 			mux {
 				groups = "pwm_e";
@@ -284,6 +389,20 @@ mux {
 			};
 		};
 
+		pwm_f_clk_pins: pwm_f_clk {
+			mux {
+				groups = "pwm_f_clk";
+				function = "pwm_f";
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f";
+			};
+		};
+
 		hdmi_hpd_pins: hdmi_hpd {
 			mux {
 				groups = "hdmi_hpd";
@@ -297,6 +416,61 @@ mux {
 				function = "hdmi_i2c";
 			};
 		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out";
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out";
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out";
+			};
+		};
+
+		i2s_out_ch01_pins: i2s_out_ch01 {
+			mux {
+				groups = "i2s_out_ch01";
+				function = "i2s_out";
+			};
+		};
+		i2sout_ch23_z_pins: i2sout_ch23_z {
+			mux {
+				groups = "i2sout_ch23_z";
+				function = "i2s_out";
+			};
+		};
+
+		i2sout_ch45_z_pins: i2sout_ch45_z {
+			mux {
+				groups = "i2sout_ch45_z";
+				function = "i2s_out";
+			};
+		};
+
+		i2sout_ch67_z_pins: i2sout_ch67_z {
+			mux {
+				groups = "i2sout_ch67_z";
+				function = "i2s_out";
+			};
+		};
+
+		spdif_out_h_pins: spdif_out_ao_h {
+			mux {
+				groups = "spdif_out_h";
+				function = "spdif_out";
+			};
+		};
 	};
 
 	eth-phy-mux {
@@ -339,6 +513,10 @@ &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
 &i2c_B {
 	clocks = <&clkc CLKID_I2C>;
 };
@@ -378,6 +556,22 @@ &sd_emmc_c {
 	clock-names = "core", "clkin0", "clkin1";
 };
 
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
 };
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

@@ -100,6 +100,17 @@ cvbs_connector_in: endpoint {
 			};
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -162,6 +173,8 @@ &ethmac {
 	/* Select external PHY by default */
 	phy-handle = <&external_phy>;
 
+	amlogic,tx-delay-ns = <2>;
+
 	snps,reset-gpio = <&gpio GPIOZ_14 0>;
 	snps,reset-delays-us = <0 10000 1000000>;
 	snps,reset-active-low;
@@ -183,3 +196,15 @@ cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts

@@ -43,12 +43,47 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+
 #include "meson-gxm.dtsi"
 #include "meson-gx-p23x-q20x.dtsi"
 
 / {
 	compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
 	model = "Amlogic Meson GXM (S912) Q200 Development Board";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 };
 
 /* Q200 has exclusive choice between internal or external PHY */
@@ -59,6 +94,8 @@ &ethmac {
 	/* Select external PHY by default */
 	phy-handle = <&external_phy>;
 
+	amlogic,tx-delay-ns = <2>;
+
 	/* External PHY reset is shared with internal PHY Led signals */
 	snps,reset-gpio = <&gpio GPIOZ_14 0>;
 	snps,reset-delays-us = <0 10000 1000000>;
@@ -75,3 +112,8 @@ external_phy: ethernet-phy@0 {
 		max-speed = <1000>;
 	};
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};

arch/arm64/boot/dts/amlogic/meson-gxm.dtsi

@@ -130,3 +130,6 @@ &vpu {
 	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
 };
 
+&hdmi_tx {
+	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+};

drivers/clk/meson/gxbb.h

@@ -177,7 +177,7 @@
 /* CLKID_FCLK_DIV4 */
 #define CLKID_FCLK_DIV5		  7
 #define CLKID_FCLK_DIV7		  8
-#define CLKID_GP0_PLL		  9
+/* CLKID_GP0_PLL */
 #define CLKID_MPEG_SEL		  10
 #define CLKID_MPEG_DIV		  11
 /* CLKID_CLK81 */
@@ -206,16 +206,16 @@
 #define CLKID_I2S_SPDIF		  35
 /* CLKID_ETH */
 #define CLKID_DEMUX		  37
-#define CLKID_AIU_GLUE		  38
+/* CLKID_AIU_GLUE */
 #define CLKID_IEC958		  39
-#define CLKID_I2S_OUT		  40
+/* CLKID_I2S_OUT */
 #define CLKID_AMCLK		  41
 #define CLKID_AIFIFO2		  42
 #define CLKID_MIXER		  43
-#define CLKID_MIXER_IFACE	  44
+/* CLKID_MIXER_IFACE */
 #define CLKID_ADC		  45
 #define CLKID_BLKMV		  46
-#define CLKID_AIU		  47
+/* CLKID_AIU */
 #define CLKID_UART1		  48
 #define CLKID_G2D		  49
 /* CLKID_USB0 */
@@ -248,7 +248,7 @@
 /* CLKID_GCLK_VENCI_INT0 */
 #define CLKID_GCLK_VENCI_INT	  78
 #define CLKID_DAC_CLK		  79
-#define CLKID_AOCLK_GATE	  80
+/* CLKID_AOCLK_GATE */
 #define CLKID_IEC958_GATE	  81
 #define CLKID_ENC480P		  82
 #define CLKID_RNG1		  83
@@ -268,8 +268,15 @@
 /* CLKID_SAR_ADC_CLK */
 /* CLKID_SAR_ADC_SEL */
 #define CLKID_SAR_ADC_DIV	  99
+/* CLKID_MALI_0_SEL */
+#define CLKID_MALI_0_DIV	 101
+/* CLKID_MALI_0	*/
+/* CLKID_MALI_1_SEL */
+#define CLKID_MALI_1_DIV	 104
+/* CLKID_MALI_1	*/
+/* CLKID_MALI	*/
 
-#define NR_CLKS			  100
+#define NR_CLKS			  107
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>

include/dt-bindings/clock/gxbb-clkc.h

@@ -10,12 +10,17 @@
 #define CLKID_FCLK_DIV2		4
 #define CLKID_FCLK_DIV3		5
 #define CLKID_FCLK_DIV4		6
+#define CLKID_GP0_PLL		9
 #define CLKID_CLK81		12
 #define CLKID_MPLL2		15
 #define CLKID_SPI		34
 #define CLKID_I2C		22
 #define CLKID_SAR_ADC		23
 #define CLKID_ETH		36
+#define CLKID_AIU_GLUE		38
+#define CLKID_I2S_OUT		40
+#define CLKID_MIXER_IFACE	44
+#define CLKID_AIU		47
 #define CLKID_USB0		50
 #define CLKID_USB1		51
 #define CLKID_USB		55
@@ -24,11 +29,17 @@
 #define CLKID_USB0_DDR_BRIDGE	65
 #define CLKID_SANA		69
 #define CLKID_GCLK_VENCI_INT0	77
+#define CLKID_AOCLK_GATE	80
 #define CLKID_AO_I2C		93
 #define CLKID_SD_EMMC_A		94
 #define CLKID_SD_EMMC_B		95
 #define CLKID_SD_EMMC_C		96
 #define CLKID_SAR_ADC_CLK	97
 #define CLKID_SAR_ADC_SEL	98
+#define CLKID_MALI_0_SEL	100
+#define CLKID_MALI_0		102
+#define CLKID_MALI_1_SEL	103
+#define CLKID_MALI_1		105
+#define CLKID_MALI		106
 
 #endif /* __GXBB_CLKC_H */