Commit de554096 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Mostly documentation/comment changes and non urgent fixes.

   - add or fix SPDX identifiers

   - NXP pcf*: fix datasheet URLs

   - imxdi: add wakeup support

   - pcf2127: handle timestamp interrupts, this fixes a possible
     interrupt storm

   - bd70528: Drop BD70528 support"

* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: pcf8523: rename register and bit defines
  rtc: pcf2127: handle timestamp interrupts
  rtc: at91sam9: Remove unnecessary offset variable checks
  rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
  rtc: spear: convert to SPDX identifier
  rtc: tps6586x: convert to SPDX identifier
  rtc: tps80031: convert to SPDX identifier
  rtc: rtd119x: Fix format of SPDX identifier
  rtc: sc27xx: Fix format of SPDX identifier
  rtc: palmas: convert to SPDX identifier
  rtc: max6900: convert to SPDX identifier
  rtc: ds1374: convert to SPDX identifier
  rtc: au1xxx: convert to SPDX identifier
  rtc: pcf85063: Update the PCF85063A datasheet revision
  dt-bindings: rtc: ti,bq32k: take maintainership
  rtc: pcf8563: Fix the datasheet URL
  rtc: pcf85063: Fix the datasheet URL
  rtc: pcf2127: Fix the datasheet URL
  dt-bindings: rtc: ti,bq32k: Convert to json-schema
  dt-bindings: rtc: rx8900: Convert to YAML schema
  ...
parents 6bce2443 4aa90c03
Real Time Clock driver for:
- Epson RX8900
- Micro Crystal rv8803
Required properties:
- compatible: should be: "microcrystal,rv8803" or "epson,rx8900"
- reg : the I2C address of the device for I2C
Optional properties:
- epson,vdet-disable : boolean, if present will disable voltage detector.
Should be set if no backup battery is used.
- trickle-diode-disable : boolean, if present will disable internal trickle
charger diode
Example:
rtc: rtc@32 {
compatible = "epson,rx8900"
reg = <0x32>;
epson,vdet-disable;
trickle-diode-disable;
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/rtc/epson,rx8900.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: EPSON RX8900 / Microcrystal RV8803 Real-Time Clock DT bindings
maintainers:
- Marek Vasut <marex@denx.de>
allOf:
- $ref: rtc.yaml#
properties:
compatible:
enum:
- epson,rx8900
- microcrystal,rv8803
reg:
maxItems: 1
epson,vdet-disable:
type: boolean
description: |
Disable voltage detector. Should be set if no backup battery is used.
trickle-diode-disable: true
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
epson,vdet-disable;
trickle-diode-disable;
};
};
* Faraday Technology FTRTC010 Real Time Clock
This RTC appears in for example the Storlink Gemini family of
SoCs.
Required properties:
- compatible : Should be one of:
"faraday,ftrtc010"
"cortina,gemini-rtc", "faraday,ftrtc010"
Optional properties:
- clocks: when present should contain clock references to the
PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and
says the clock should be 1 Hz, but implementers actually seem
to choose different clocks here, like Cortina who chose
32768 Hz (a typical low-power clock).
- clock-names: should name the clocks "PCLK" and "EXTCLK"
respectively.
Examples:
rtc@45000000 {
compatible = "cortina,gemini-rtc";
reg = <0x45000000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&foo 0>, <&foo 1>;
clock-names = "PCLK", "EXTCLK";
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/rtc/faraday,ftrtc010.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Faraday Technology FTRTC010 Real Time Clock
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
This RTC appears in for example the Storlink Gemini family of SoCs.
properties:
compatible:
oneOf:
- const: faraday,ftrtc010
- items:
- const: cortina,gemini-rtc
- const: faraday,ftrtc010
resets:
maxItems: 1
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 2
items:
- description: PCLK clocks
- description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock
should be 1 Hz, but implementers actually seem to choose different
clocks here, like Cortina who chose 32768 Hz (a typical low-power clock).
clock-names:
items:
- const: "PCLK"
- const: "EXTCLK"
required:
- compatible
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
rtc@45000000 {
compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
reg = <0x45000000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&foo 0>, <&foo 1>;
clock-names = "PCLK", "EXTCLK";
};
......@@ -21,10 +21,19 @@ Optional properties:
clock name
- wakeup-source: Enables wake up of host system on alarm
Optional child node:
- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
Example:
rtc@68 {
compatible = "st,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC0>;
interrupts = <0x9 0x8>;
clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/rtc/ti,bq32000.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI BQ32000 I2C Serial Real-Time Clock
maintainers:
- Alexandre Belloni <alexandre.belloni@bootlin.com>
allOf:
- $ref: rtc.yaml#
properties:
compatible:
const: ti,bq32000
reg:
const: 0x68
interrupts:
maxItems: 1
start-year: true
trickle-resistor-ohms:
enum: [ 1120, 20180 ]
trickle-diode-disable: true
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
bq32000: rtc@68 {
compatible = "ti,bq32000";
reg = <0x68>;
trickle-resistor-ohms = <1120>;
};
};
* TI BQ32000 I2C Serial Real-Time Clock
Required properties:
- compatible: Should contain "ti,bq32000".
- reg: I2C address for chip
Optional properties:
- trickle-resistor-ohms : Selected resistor for trickle charger
Values usable are 1120 and 20180
Should be given if trickle charger should be enabled
- trickle-diode-disable : Do not use internal trickle charger diode
Should be given if internal trickle charger diode should be disabled
Example:
bq32000: rtc@68 {
compatible = "ti,bq32000";
trickle-resistor-ohms = <1120>;
reg = <0x68>;
};
......@@ -501,11 +501,11 @@ config RTC_DRV_M41T80_WDT
watchdog timer in the ST M41T60 and M41T80 RTC chips series.
config RTC_DRV_BD70528
tristate "ROHM BD70528, BD71815 and BD71828 PMIC RTC"
depends on MFD_ROHM_BD71828 || MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG)
tristate "ROHM BD71815 and BD71828 PMIC RTC"
depends on MFD_ROHM_BD71828
help
If you say Y here you will get support for the RTC
block on ROHM BD70528, BD71815 and BD71828 Power Management IC.
block on ROHM BD71815 and BD71828 Power Management IC.
This driver can also be built as a module. If so, the module
will be called rtc-bd70528.
......
......@@ -23,8 +23,8 @@ static bool is_rtc_hctosys(struct rtc_device *rtc)
int size;
char name[NAME_SIZE];
size = scnprintf(name, NAME_SIZE, "rtc%d", rtc->id);
if (size > NAME_SIZE)
size = snprintf(name, NAME_SIZE, "rtc%d", rtc->id);
if (size >= NAME_SIZE)
return false;
return !strncmp(name, CONFIG_RTC_HCTOSYS_DEVICE, NAME_SIZE);
......
......@@ -184,7 +184,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
return -EILSEQ;
memset(alrm, 0, sizeof(*alrm));
if (alarm != ALARM_DISABLED && offset != 0) {
if (alarm != ALARM_DISABLED) {
rtc_time64_to_tm(offset + alarm, tm);
dev_dbg(dev, "%s: %ptR\n", __func__, tm);
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* Au1xxx counter0 (aka Time-Of-Year counter) RTC interface driver.
*
* Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
/* All current Au1xxx SoCs have 2 counters fed by an external 32.768 kHz
......
......@@ -2,10 +2,9 @@
//
// Copyright (C) 2018 ROHM Semiconductors
//
// RTC driver for ROHM BD70528 PMIC
// RTC driver for ROHM BD71828 and BD71815 PMIC
#include <linux/bcd.h>
#include <linux/mfd/rohm-bd70528.h>
#include <linux/mfd/rohm-bd71815.h>
#include <linux/mfd/rohm-bd71828.h>
#include <linux/module.h>
......@@ -39,11 +38,6 @@ struct bd70528_rtc_data {
u8 year;
} __packed;
struct bd70528_rtc_wake {
struct bd70528_rtc_day time;
u8 ctrl;
} __packed;
struct bd71828_rtc_alm {
struct bd70528_rtc_data alm0;
struct bd70528_rtc_data alm1;
......@@ -51,141 +45,14 @@ struct bd71828_rtc_alm {
u8 alm1_mask;
} __packed;
struct bd70528_rtc_alm {
struct bd70528_rtc_data data;
u8 alm_mask;
u8 alm_repeat;
} __packed;
struct bd70528_rtc {
struct rohm_regmap_dev *parent;
struct regmap *regmap;
struct device *dev;
u8 reg_time_start;
u8 bd718xx_alm_block_start;
bool has_rtc_timers;
};
static int bd70528_set_wake(struct rohm_regmap_dev *bd70528,
int enable, int *old_state)
{
int ret;
unsigned int ctrl_reg;
ret = regmap_read(bd70528->regmap, BD70528_REG_WAKE_EN, &ctrl_reg);
if (ret)
return ret;
if (old_state) {
if (ctrl_reg & BD70528_MASK_WAKE_EN)
*old_state |= BD70528_WAKE_STATE_BIT;
else
*old_state &= ~BD70528_WAKE_STATE_BIT;
if (!enable == !(*old_state & BD70528_WAKE_STATE_BIT))
return 0;
}
if (enable)
ctrl_reg |= BD70528_MASK_WAKE_EN;
else
ctrl_reg &= ~BD70528_MASK_WAKE_EN;
return regmap_write(bd70528->regmap, BD70528_REG_WAKE_EN,
ctrl_reg);
}
static int bd70528_set_elapsed_tmr(struct rohm_regmap_dev *bd70528,
int enable, int *old_state)
{
int ret;
unsigned int ctrl_reg;
/*
* TBD
* What is the purpose of elapsed timer ?
* Is the timeout registers counting down, or is the disable - re-enable
* going to restart the elapsed-time counting? If counting is restarted
* the timeout should be decreased by the amount of time that has
* elapsed since starting the timer. Maybe we should store the monotonic
* clock value when timer is started so that if RTC is set while timer
* is armed we could do the compensation. This is a hack if RTC/system
* clk are drifting. OTOH, RTC controlled via I2C is in any case
* inaccurate...
*/
ret = regmap_read(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN,
&ctrl_reg);
if (ret)
return ret;
if (old_state) {
if (ctrl_reg & BD70528_MASK_ELAPSED_TIMER_EN)
*old_state |= BD70528_ELAPSED_STATE_BIT;
else
*old_state &= ~BD70528_ELAPSED_STATE_BIT;
if ((!enable) == (!(*old_state & BD70528_ELAPSED_STATE_BIT)))
return 0;
}
if (enable)
ctrl_reg |= BD70528_MASK_ELAPSED_TIMER_EN;
else
ctrl_reg &= ~BD70528_MASK_ELAPSED_TIMER_EN;
return regmap_write(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN,
ctrl_reg);
}
static int bd70528_set_rtc_based_timers(struct bd70528_rtc *r, int new_state,
int *old_state)
{
int ret;
ret = bd70528_wdt_set(r->parent, new_state & BD70528_WDT_STATE_BIT,
old_state);
if (ret) {
dev_err(r->dev,
"Failed to disable WDG for RTC setting (%d)\n", ret);
return ret;
}
ret = bd70528_set_elapsed_tmr(r->parent,
new_state & BD70528_ELAPSED_STATE_BIT,
old_state);
if (ret) {
dev_err(r->dev,
"Failed to disable 'elapsed timer' for RTC setting\n");
return ret;
}
ret = bd70528_set_wake(r->parent, new_state & BD70528_WAKE_STATE_BIT,
old_state);
if (ret) {
dev_err(r->dev,
"Failed to disable 'wake timer' for RTC setting\n");
return ret;
}
return ret;
}
static int bd70528_re_enable_rtc_based_timers(struct bd70528_rtc *r,
int old_state)
{
if (!r->has_rtc_timers)
return 0;
return bd70528_set_rtc_based_timers(r, old_state, NULL);
}
static int bd70528_disable_rtc_based_timers(struct bd70528_rtc *r,
int *old_state)
{
if (!r->has_rtc_timers)
return 0;
return bd70528_set_rtc_based_timers(r, 0, old_state);
}
static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d)
{
d->sec &= ~BD70528_MASK_RTC_SEC;
......@@ -267,52 +134,6 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
}
static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
{
struct bd70528_rtc_wake wake;
struct bd70528_rtc_alm alm;
int ret;
struct bd70528_rtc *r = dev_get_drvdata(dev);
ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_WAKE_START, &wake,
sizeof(wake));
if (ret) {
dev_err(dev, "Failed to read wake regs\n");
return ret;
}
ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
sizeof(alm));
if (ret) {
dev_err(dev, "Failed to read alarm regs\n");
return ret;
}
tm2rtc(&a->time, &alm.data);
tmday2rtc(&a->time, &wake.time);
if (a->enabled) {
alm.alm_mask &= ~BD70528_MASK_ALM_EN;
wake.ctrl |= BD70528_MASK_WAKE_EN;
} else {
alm.alm_mask |= BD70528_MASK_ALM_EN;
wake.ctrl &= ~BD70528_MASK_WAKE_EN;
}
ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_WAKE_START, &wake,
sizeof(wake));
if (ret) {
dev_err(dev, "Failed to set wake time\n");
return ret;
}
ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
sizeof(alm));
if (ret)
dev_err(dev, "Failed to set alarm time\n");
return ret;
}
static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a)
{
int ret;
......@@ -336,78 +157,28 @@ static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a)
return 0;
}
static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a)
static int bd71828_set_time(struct device *dev, struct rtc_time *t)
{
struct bd70528_rtc_alm alm;
int ret;
struct bd70528_rtc *r = dev_get_drvdata(dev);
ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
sizeof(alm));
if (ret) {
dev_err(dev, "Failed to read alarm regs\n");
return ret;
}
rtc2tm(&alm.data, &a->time);
a->time.tm_mday = -1;
a->time.tm_mon = -1;
a->time.tm_year = -1;
a->enabled = !(alm.alm_mask & BD70528_MASK_ALM_EN);
a->pending = 0;
return 0;
}
static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
{
int ret, tmpret, old_states;
struct bd70528_rtc_data rtc_data;
struct bd70528_rtc *r = dev_get_drvdata(dev);
ret = bd70528_disable_rtc_based_timers(r, &old_states);
if (ret)
return ret;
tmpret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (tmpret) {
ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (ret) {
dev_err(dev, "Failed to read RTC time registers\n");
goto renable_out;
return ret;
}
tm2rtc(t, &rtc_data);
tmpret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (tmpret) {
ret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (ret)
dev_err(dev, "Failed to set RTC time\n");
goto renable_out;
}
renable_out:
ret = bd70528_re_enable_rtc_based_timers(r, old_states);
if (tmpret)
ret = tmpret;
return ret;
}
static int bd71828_set_time(struct device *dev, struct rtc_time *t)
{
return bd70528_set_time_locked(dev, t);
}
static int bd70528_set_time(struct device *dev, struct rtc_time *t)
{
int ret;
struct bd70528_rtc *r = dev_get_drvdata(dev);
bd70528_wdt_lock(r->parent);
ret = bd70528_set_time_locked(dev, t);
bd70528_wdt_unlock(r->parent);
return ret;
}
static int bd70528_get_time(struct device *dev, struct rtc_time *t)
{
struct bd70528_rtc *r = dev_get_drvdata(dev);
......@@ -427,31 +198,6 @@ static int bd70528_get_time(struct device *dev, struct rtc_time *t)
return 0;
}
static int bd70528_alm_enable(struct device *dev, unsigned int enabled)
{
int ret;
unsigned int enableval = BD70528_MASK_ALM_EN;
struct bd70528_rtc *r = dev_get_drvdata(dev);
if (enabled)
enableval = 0;
bd70528_wdt_lock(r->parent);
ret = bd70528_set_wake(r->parent, enabled, NULL);
if (ret) {
dev_err(dev, "Failed to change wake state\n");
goto out_unlock;
}
ret = regmap_update_bits(r->regmap, BD70528_REG_RTC_ALM_MASK,
BD70528_MASK_ALM_EN, enableval);
if (ret)
dev_err(dev, "Failed to change alarm state\n");
out_unlock:
bd70528_wdt_unlock(r->parent);
return ret;
}
static int bd71828_alm_enable(struct device *dev, unsigned int enabled)
{
int ret;
......@@ -470,14 +216,6 @@ static int bd71828_alm_enable(struct device *dev, unsigned int enabled)
return ret;
}
static const struct rtc_class_ops bd70528_rtc_ops = {
.read_time = bd70528_get_time,
.set_time = bd70528_set_time,
.read_alarm = bd70528_read_alarm,
.set_alarm = bd70528_set_alarm,
.alarm_irq_enable = bd70528_alm_enable,
};
static const struct rtc_class_ops bd71828_rtc_ops = {
.read_time = bd70528_get_time,
.set_time = bd71828_set_time,
......@@ -503,7 +241,6 @@ static int bd70528_probe(struct platform_device *pdev)
struct rtc_device *rtc;
int irq;
unsigned int hr;
bool enable_main_irq = false;
u8 hour_reg;
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
......@@ -518,21 +255,9 @@ static int bd70528_probe(struct platform_device *pdev)
}
bd_rtc->dev = &pdev->dev;
rtc_ops = &bd71828_rtc_ops;
switch (chip) {
case ROHM_CHIP_TYPE_BD70528:
bd_rtc->parent = dev_get_drvdata(pdev->dev.parent);
if (!bd_rtc->parent) {
dev_err(&pdev->dev, "No MFD data\n");
return -EINVAL;
}
irq_name = "bd70528-rtc-alm";
bd_rtc->has_rtc_timers = true;
bd_rtc->reg_time_start = BD70528_REG_RTC_START;
hour_reg = BD70528_REG_RTC_HOUR;
enable_main_irq = true;
rtc_ops = &bd70528_rtc_ops;
break;
case ROHM_CHIP_TYPE_BD71815:
irq_name = "bd71815-rtc-alm-0";
bd_rtc->reg_time_start = BD71815_REG_RTC_START;
......@@ -549,14 +274,12 @@ static int bd70528_probe(struct platform_device *pdev)
*/
bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START;
hour_reg = BD71815_REG_HOUR;
rtc_ops = &bd71828_rtc_ops;
break;
case ROHM_CHIP_TYPE_BD71828:
irq_name = "bd71828-rtc-alm-0";
bd_rtc->reg_time_start = BD71828_REG_RTC_START;
bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START;
hour_reg = BD71828_REG_RTC_HOUR;
rtc_ops = &bd71828_rtc_ops;
break;
default:
dev_err(&pdev->dev, "Unknown chip\n");
......@@ -611,27 +334,10 @@ static int bd70528_probe(struct platform_device *pdev)
if (ret)
return ret;
/*
* BD70528 irq controller is not touching the main mask register.
* So enable the RTC block interrupts at main level. We can just
* leave them enabled as irq-controller should disable irqs
* from sub-registers when IRQ is disabled or freed.
*/
if (enable_main_irq) {
ret = regmap_update_bits(bd_rtc->regmap,
BD70528_REG_INT_MAIN_MASK,
BD70528_INT_RTC_MASK, 0);
if (ret) {
dev_err(&pdev->dev, "Failed to enable RTC interrupts\n");
return ret;
}
}
return devm_rtc_register_device(rtc);
}
static const struct platform_device_id bd718x7_rtc_id[] = {
{ "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 },
{ "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 },
{ "bd71815-rtc", ROHM_CHIP_TYPE_BD71815 },
{ },
......@@ -649,6 +355,6 @@ static struct platform_driver bd70528_rtc = {
module_platform_driver(bd70528_rtc);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("ROHM BD70528 and BD71828 PMIC RTC driver");
MODULE_DESCRIPTION("ROHM BD71828 and BD71815 PMIC RTC driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:bd70528-rtc");
// SPDX-License-Identifier: GPL-2.0-only
/*
* RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
*
......@@ -6,11 +7,7 @@
*
* Copyright (C) 2014 Rose Technology
* Copyright (C) 2006-2007 Freescale Semiconductor
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
* Copyright (c) 2005 MontaVista Software, Inc.
*/
/*
* It would be more efficient to use i2c msgs/i2c_transfer directly but, as
......
......@@ -280,7 +280,6 @@ static struct platform_driver efi_rtc_driver = {
module_platform_driver_probe(efi_rtc_driver, efi_rtc_probe);
MODULE_ALIAS("platform:rtc-efi");
MODULE_AUTHOR("dann frazier <dannf@dannf.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("EFI RTC driver");
......
......@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
#include <linux/rtc.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
......@@ -811,6 +812,9 @@ static int __init dryice_rtc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, imxdi);
device_init_wakeup(&pdev->dev, true);
dev_pm_set_wake_irq(&pdev->dev, norm_irq);
imxdi->rtc->ops = &dryice_rtc_ops;
imxdi->rtc->range_max = U32_MAX;
......
......@@ -544,10 +544,22 @@ static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
{
struct i2c_client *client = m41t80->client;
struct device_node *node = client->dev.of_node;
struct device_node *fixed_clock;
struct clk *clk;
struct clk_init_data init;
int ret;
fixed_clock = of_get_child_by_name(node, "clock");
if (fixed_clock) {
/*
* skip registering square wave clock when a fixed
* clock has been registered. The fixed clock is
* registered automatically when being referenced.
*/
of_node_put(fixed_clock);
return 0;
}
/* First disable the clock */
ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (ret < 0)
......@@ -599,10 +611,8 @@ static unsigned long wdt_is_open;
static int boot_flag;
/**
* wdt_ping:
*
* Reload counter one with the watchdog timeout. We don't bother reloading
* the cascade counter.
* wdt_ping - Reload counter one with the watchdog timeout.
* We don't bother reloading the cascade counter.
*/
static void wdt_ping(void)
{
......@@ -638,9 +648,7 @@ static void wdt_ping(void)
}
/**
* wdt_disable:
*
* disables watchdog.
* wdt_disable - disables watchdog.
*/
static void wdt_disable(void)
{
......@@ -677,7 +685,7 @@ static void wdt_disable(void)
}
/**
* wdt_write:
* wdt_write - write to watchdog.
* @file: file handle to the watchdog
* @buf: buffer to write (unused as data does not matter here
* @count: count of bytes
......@@ -703,7 +711,7 @@ static ssize_t wdt_read(struct file *file, char __user *buf,
}
/**
* wdt_ioctl:
* wdt_ioctl - ioctl handler to set watchdog.
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
......@@ -778,7 +786,7 @@ static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
}
/**
* wdt_open:
* wdt_open - open a watchdog.
* @inode: inode of device
* @file: file handle to device
*
......@@ -802,7 +810,7 @@ static int wdt_open(struct inode *inode, struct file *file)
}
/**
* wdt_close:
* wdt_release - release a watchdog.
* @inode: inode to board
* @file: file handle to board
*
......@@ -815,7 +823,7 @@ static int wdt_release(struct inode *inode, struct file *file)
}
/**
* notify_sys:
* wdt_notify_sys - notify to watchdog.
* @this: our notifier block
* @code: the event being reported
* @unused: unused
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* rtc class driver for the Maxim MAX6900 chip
*
* Copyright (c) 2007 MontaVista, Software, Inc.
*
* Author: Dale Farnsworth <dale@farnsworth.org>
*
* based on previously existing rtc class drivers
*
* 2007 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/module.h>
......
......@@ -717,8 +717,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
add_rtc_irq:
ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
IRQF_ONESHOT | IRQF_SHARED,
0, info->drv_data->rtc_irq_chip,
&info->rtc_irq_data);
if (ret < 0) {
dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
......
......@@ -372,6 +372,7 @@ static const struct of_device_id mxc_ids[] = {
{ .compatible = "fsl,imx53-rtc", },
{}
};
MODULE_DEVICE_TABLE(of, mxc_ids);
static struct platform_driver mxc_rtc_driver = {
.driver = {
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* rtc-palmas.c -- Palmas Real Time Clock driver.
......@@ -7,20 +8,6 @@
* Copyright (c) 2012, NVIDIA Corporation.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307, USA
*/
#include <linux/bcd.h>
......
......@@ -10,7 +10,7 @@
*
* based on the other drivers in this same directory.
*
* Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf
* Datasheet: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf
*/
#include <linux/i2c.h>
......@@ -94,10 +94,20 @@
#define PCF2127_WD_VAL_MAX 255
#define PCF2127_WD_VAL_DEFAULT 60
/* Mask for currently enabled interrupts */
#define PCF2127_CTRL1_IRQ_MASK (PCF2127_BIT_CTRL1_TSF1)
#define PCF2127_CTRL2_IRQ_MASK ( \
PCF2127_BIT_CTRL2_AF | \
PCF2127_BIT_CTRL2_WDTF | \
PCF2127_BIT_CTRL2_TSF2)
struct pcf2127 {
struct rtc_device *rtc;
struct watchdog_device wdd;
struct regmap *regmap;
time64_t ts;
bool ts_valid;
bool irq_enabled;
};
/*
......@@ -434,23 +444,96 @@ static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return pcf2127_rtc_alarm_irq_enable(dev, alrm->enabled);
}
/*
* This function reads ctrl2 register, caller is responsible for calling
* pcf2127_wdt_active_ping()
*/
static int pcf2127_rtc_ts_read(struct device *dev, time64_t *ts)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
struct rtc_time tm;
int ret;
unsigned char data[25];
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data,
sizeof(data));
if (ret) {
dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
return ret;
}
dev_dbg(dev,
"%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
__func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2],
data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC],
data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR],
data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO],
data[PCF2127_REG_TS_YR]);
tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F);
tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F);
tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F);
tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F);
/* TS_MO register (month) value range: 1-12 */
tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1;
tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]);
if (tm.tm_year < 70)
tm.tm_year += 100; /* assume we are in 1970...2069 */
ret = rtc_valid_tm(&tm);
if (ret) {
dev_err(dev, "Invalid timestamp. ret=%d\n", ret);
return ret;
}
*ts = rtc_tm_to_time64(&tm);
return 0;
};
static void pcf2127_rtc_ts_snapshot(struct device *dev)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
int ret;
/* Let userspace read the first timestamp */
if (pcf2127->ts_valid)
return;
ret = pcf2127_rtc_ts_read(dev, &pcf2127->ts);
if (!ret)
pcf2127->ts_valid = true;
}
static irqreturn_t pcf2127_rtc_irq(int irq, void *dev)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
unsigned int ctrl2 = 0;
unsigned int ctrl1, ctrl2;
int ret = 0;
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1);
if (ret)
return IRQ_NONE;
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
if (ret)
return IRQ_NONE;
if (!(ctrl2 & PCF2127_BIT_CTRL2_AF))
if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK))
return IRQ_NONE;
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
ctrl2 & ~(PCF2127_BIT_CTRL2_AF | PCF2127_BIT_CTRL2_WDTF));
if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2)
pcf2127_rtc_ts_snapshot(dev);
if (ctrl1 & PCF2127_CTRL1_IRQ_MASK)
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1,
ctrl1 & ~PCF2127_CTRL1_IRQ_MASK);
if (ctrl2 & PCF2127_CTRL2_IRQ_MASK)
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
ctrl2 & ~PCF2127_CTRL2_IRQ_MASK);
rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF);
if (ctrl2 & PCF2127_BIT_CTRL2_AF)
rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF);
pcf2127_wdt_active_ping(&pcf2127->wdd);
......@@ -475,23 +558,27 @@ static ssize_t timestamp0_store(struct device *dev,
struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
int ret;
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
PCF2127_BIT_CTRL1_TSF1, 0);
if (ret) {
dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret);
return ret;
}
if (pcf2127->irq_enabled) {
pcf2127->ts_valid = false;
} else {
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
PCF2127_BIT_CTRL1_TSF1, 0);
if (ret) {
dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret);
return ret;
}
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
PCF2127_BIT_CTRL2_TSF2, 0);
if (ret) {
dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret);
return ret;
}
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
PCF2127_BIT_CTRL2_TSF2, 0);
if (ret) {
dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret);
return ret;
}
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
}
return count;
};
......@@ -500,50 +587,36 @@ static ssize_t timestamp0_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
struct rtc_time tm;
unsigned int ctrl1, ctrl2;
int ret;
unsigned char data[25];
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data,
sizeof(data));
if (ret) {
dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
return ret;
}
dev_dbg(dev,
"%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, "
"ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
__func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2],
data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC],
data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR],
data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO],
data[PCF2127_REG_TS_YR]);
time64_t ts;
if (pcf2127->irq_enabled) {
if (!pcf2127->ts_valid)
return 0;
ts = pcf2127->ts;
} else {
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1);
if (ret)
return 0;
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
if (ret)
return 0;
if (!(data[PCF2127_REG_CTRL1] & PCF2127_BIT_CTRL1_TSF1) &&
!(data[PCF2127_REG_CTRL2] & PCF2127_BIT_CTRL2_TSF2))
return 0;
if (!(ctrl1 & PCF2127_BIT_CTRL1_TSF1) &&
!(ctrl2 & PCF2127_BIT_CTRL2_TSF2))
return 0;
tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F);
tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F);
tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F);
tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F);
/* TS_MO register (month) value range: 1-12 */
tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1;
tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]);
if (tm.tm_year < 70)
tm.tm_year += 100; /* assume we are in 1970...2069 */
ret = rtc_valid_tm(&tm);
if (ret)
return ret;
ret = pcf2127_rtc_ts_read(dev->parent, &ts);
if (ret)
return 0;
return sprintf(buf, "%llu\n",
(unsigned long long)rtc_tm_to_time64(&tm));
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
}
return sprintf(buf, "%llu\n", (unsigned long long)ts);
};
static DEVICE_ATTR_RW(timestamp0);
......@@ -594,6 +667,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
dev_err(dev, "failed to request alarm irq\n");
return ret;
}
pcf2127->irq_enabled = true;
}
if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
......
......@@ -21,10 +21,10 @@
/*
* Information for this driver was pulled from the following datasheets.
*
* https://www.nxp.com/documents/data_sheet/PCF85063A.pdf
* https://www.nxp.com/documents/data_sheet/PCF85063TP.pdf
* https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf
* https://www.nxp.com/docs/en/data-sheet/PCF85063TP.pdf
*
* PCF85063A -- Rev. 6 — 18 November 2015
* PCF85063A -- Rev. 7 — 30 March 2018
* PCF85063TP -- Rev. 4 — 6 May 2015
*
* https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-8263-C7_App-Manual.pdf
......
......@@ -10,41 +10,41 @@
#include <linux/of.h>
#include <linux/pm_wakeirq.h>
#define REG_CONTROL1 0x00
#define REG_CONTROL1_CAP_SEL BIT(7)
#define REG_CONTROL1_STOP BIT(5)
#define REG_CONTROL1_AIE BIT(1)
#define REG_CONTROL2 0x01
#define REG_CONTROL2_AF BIT(3)
#define REG_CONTROL3 0x02
#define REG_CONTROL3_PM_BLD BIT(7) /* battery low detection disabled */
#define REG_CONTROL3_PM_VDD BIT(6) /* switch-over disabled */
#define REG_CONTROL3_PM_DSM BIT(5) /* direct switching mode */
#define REG_CONTROL3_PM_MASK 0xe0
#define REG_CONTROL3_BLF BIT(2) /* battery low bit, read-only */
#define REG_SECONDS 0x03
#define REG_SECONDS_OS BIT(7)
#define REG_MINUTES 0x04
#define REG_HOURS 0x05
#define REG_DAYS 0x06
#define REG_WEEKDAYS 0x07
#define REG_MONTHS 0x08
#define REG_YEARS 0x09
#define REG_MINUTE_ALARM 0x0a
#define REG_HOUR_ALARM 0x0b
#define REG_DAY_ALARM 0x0c
#define REG_WEEKDAY_ALARM 0x0d
#define PCF8523_REG_CONTROL1 0x00
#define PCF8523_CONTROL1_CAP_SEL BIT(7)
#define PCF8523_CONTROL1_STOP BIT(5)
#define PCF8523_CONTROL1_AIE BIT(1)
#define PCF8523_REG_CONTROL2 0x01
#define PCF8523_CONTROL2_AF BIT(3)
#define PCF8523_REG_CONTROL3 0x02
#define PCF8523_CONTROL3_PM_BLD BIT(7) /* battery low detection disabled */
#define PCF8523_CONTROL3_PM_VDD BIT(6) /* switch-over disabled */
#define PCF8523_CONTROL3_PM_DSM BIT(5) /* direct switching mode */
#define PCF8523_CONTROL3_PM_MASK 0xe0
#define PCF8523_CONTROL3_BLF BIT(2) /* battery low bit, read-only */
#define PCF8523_REG_SECONDS 0x03
#define PCF8523_SECONDS_OS BIT(7)
#define PCF8523_REG_MINUTES 0x04
#define PCF8523_REG_HOURS 0x05
#define PCF8523_REG_DAYS 0x06
#define PCF8523_REG_WEEKDAYS 0x07
#define PCF8523_REG_MONTHS 0x08
#define PCF8523_REG_YEARS 0x09
#define PCF8523_REG_MINUTE_ALARM 0x0a
#define PCF8523_REG_HOUR_ALARM 0x0b
#define PCF8523_REG_DAY_ALARM 0x0c
#define PCF8523_REG_WEEKDAY_ALARM 0x0d
#define ALARM_DIS BIT(7)
#define REG_OFFSET 0x0e
#define REG_OFFSET_MODE BIT(7)
#define PCF8523_REG_OFFSET 0x0e
#define PCF8523_OFFSET_MODE BIT(7)
#define REG_TMR_CLKOUT_CTRL 0x0f
#define PCF8523_TMR_CLKOUT_CTRL 0x0f
struct pcf8523 {
struct rtc_device *rtc;
......@@ -99,11 +99,11 @@ static int pcf8523_voltage_low(struct i2c_client *client)
u8 value;
int err;
err = pcf8523_read(client, REG_CONTROL3, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL3, &value);
if (err < 0)
return err;
return !!(value & REG_CONTROL3_BLF);
return !!(value & PCF8523_CONTROL3_BLF);
}
static int pcf8523_load_capacitance(struct i2c_client *client)
......@@ -112,7 +112,7 @@ static int pcf8523_load_capacitance(struct i2c_client *client)
u8 value;
int err;
err = pcf8523_read(client, REG_CONTROL1, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value);
if (err < 0)
return err;
......@@ -126,14 +126,14 @@ static int pcf8523_load_capacitance(struct i2c_client *client)
load);
fallthrough;
case 12500:
value |= REG_CONTROL1_CAP_SEL;
value |= PCF8523_CONTROL1_CAP_SEL;
break;
case 7000:
value &= ~REG_CONTROL1_CAP_SEL;
value &= ~PCF8523_CONTROL1_CAP_SEL;
break;
}
err = pcf8523_write(client, REG_CONTROL1, value);
err = pcf8523_write(client, PCF8523_REG_CONTROL1, value);
return err;
}
......@@ -143,13 +143,13 @@ static int pcf8523_set_pm(struct i2c_client *client, u8 pm)
u8 value;
int err;
err = pcf8523_read(client, REG_CONTROL3, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL3, &value);
if (err < 0)
return err;
value = (value & ~REG_CONTROL3_PM_MASK) | pm;
value = (value & ~PCF8523_CONTROL3_PM_MASK) | pm;
err = pcf8523_write(client, REG_CONTROL3, value);
err = pcf8523_write(client, PCF8523_REG_CONTROL3, value);
if (err < 0)
return err;
......@@ -162,13 +162,13 @@ static irqreturn_t pcf8523_irq(int irq, void *dev_id)
u8 value;
int err;
err = pcf8523_read(pcf8523->client, REG_CONTROL2, &value);
err = pcf8523_read(pcf8523->client, PCF8523_REG_CONTROL2, &value);
if (err < 0)
return IRQ_HANDLED;
if (value & REG_CONTROL2_AF) {
value &= ~REG_CONTROL2_AF;
pcf8523_write(pcf8523->client, REG_CONTROL2, value);
if (value & PCF8523_CONTROL2_AF) {
value &= ~PCF8523_CONTROL2_AF;
pcf8523_write(pcf8523->client, PCF8523_REG_CONTROL2, value);
rtc_update_irq(pcf8523->rtc, 1, RTC_IRQF | RTC_AF);
return IRQ_HANDLED;
......@@ -182,13 +182,13 @@ static int pcf8523_stop_rtc(struct i2c_client *client)
u8 value;
int err;
err = pcf8523_read(client, REG_CONTROL1, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value);
if (err < 0)
return err;
value |= REG_CONTROL1_STOP;
value |= PCF8523_CONTROL1_STOP;
err = pcf8523_write(client, REG_CONTROL1, value);
err = pcf8523_write(client, PCF8523_REG_CONTROL1, value);
if (err < 0)
return err;
......@@ -200,13 +200,13 @@ static int pcf8523_start_rtc(struct i2c_client *client)
u8 value;
int err;
err = pcf8523_read(client, REG_CONTROL1, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value);
if (err < 0)
return err;
value &= ~REG_CONTROL1_STOP;
value &= ~PCF8523_CONTROL1_STOP;
err = pcf8523_write(client, REG_CONTROL1, value);
err = pcf8523_write(client, PCF8523_REG_CONTROL1, value);
if (err < 0)
return err;
......@@ -216,7 +216,7 @@ static int pcf8523_start_rtc(struct i2c_client *client)
static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct i2c_client *client = to_i2c_client(dev);
u8 start = REG_SECONDS, regs[7];
u8 start = PCF8523_REG_SECONDS, regs[7];
struct i2c_msg msgs[2];
int err;
......@@ -242,7 +242,7 @@ static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
if (err < 0)
return err;
if (regs[0] & REG_SECONDS_OS)
if (regs[0] & PCF8523_SECONDS_OS)
return -EINVAL;
tm->tm_sec = bcd2bin(regs[0] & 0x7f);
......@@ -267,8 +267,8 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
if (err < 0)
return err;
regs[0] = REG_SECONDS;
/* This will purposely overwrite REG_SECONDS_OS */
regs[0] = PCF8523_REG_SECONDS;
/* This will purposely overwrite PCF8523_SECONDS_OS */
regs[1] = bin2bcd(tm->tm_sec);
regs[2] = bin2bcd(tm->tm_min);
regs[3] = bin2bcd(tm->tm_hour);
......@@ -299,7 +299,7 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
static int pcf8523_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
{
struct i2c_client *client = to_i2c_client(dev);
u8 start = REG_MINUTE_ALARM, regs[4];
u8 start = PCF8523_REG_MINUTE_ALARM, regs[4];
struct i2c_msg msgs[2];
u8 value;
int err;
......@@ -324,15 +324,15 @@ static int pcf8523_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
tm->time.tm_mday = bcd2bin(regs[2] & 0x3F);
tm->time.tm_wday = bcd2bin(regs[3] & 0x7);
err = pcf8523_read(client, REG_CONTROL1, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value);
if (err < 0)
return err;
tm->enabled = !!(value & REG_CONTROL1_AIE);
tm->enabled = !!(value & PCF8523_CONTROL1_AIE);
err = pcf8523_read(client, REG_CONTROL2, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL2, &value);
if (err < 0)
return err;
tm->pending = !!(value & REG_CONTROL2_AF);
tm->pending = !!(value & PCF8523_CONTROL2_AF);
return 0;
}
......@@ -343,16 +343,16 @@ static int pcf8523_irq_enable(struct device *dev, unsigned int enabled)
u8 value;
int err;
err = pcf8523_read(client, REG_CONTROL1, &value);
err = pcf8523_read(client, PCF8523_REG_CONTROL1, &value);
if (err < 0)
return err;
value &= REG_CONTROL1_AIE;
value &= PCF8523_CONTROL1_AIE;
if (enabled)
value |= REG_CONTROL1_AIE;
value |= PCF8523_CONTROL1_AIE;
err = pcf8523_write(client, REG_CONTROL1, value);
err = pcf8523_write(client, PCF8523_REG_CONTROL1, value);
if (err < 0)
return err;
......@@ -370,7 +370,7 @@ static int pcf8523_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
if (err)
return err;
err = pcf8523_write(client, REG_CONTROL2, 0);
err = pcf8523_write(client, PCF8523_REG_CONTROL2, 0);
if (err < 0)
return err;
......@@ -382,7 +382,7 @@ static int pcf8523_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
rtc_time64_to_tm(alarm_time, &tm->time);
}
regs[0] = REG_MINUTE_ALARM;
regs[0] = PCF8523_REG_MINUTE_ALARM;
regs[1] = bin2bcd(tm->time.tm_min);
regs[2] = bin2bcd(tm->time.tm_hour);
regs[3] = bin2bcd(tm->time.tm_mday);
......@@ -418,11 +418,11 @@ static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd,
if (ret)
flags |= RTC_VL_BACKUP_LOW;
ret = pcf8523_read(client, REG_SECONDS, &value);
ret = pcf8523_read(client, PCF8523_REG_SECONDS, &value);
if (ret < 0)
return ret;
if (value & REG_SECONDS_OS)
if (value & PCF8523_SECONDS_OS)
flags |= RTC_VL_DATA_INVALID;
return put_user(flags, (unsigned int __user *)arg);
......@@ -442,13 +442,13 @@ static int pcf8523_rtc_read_offset(struct device *dev, long *offset)
u8 value;
s8 val;
err = pcf8523_read(client, REG_OFFSET, &value);
err = pcf8523_read(client, PCF8523_REG_OFFSET, &value);
if (err < 0)
return err;
/* sign extend the 7-bit offset value */
val = value << 1;
*offset = (value & REG_OFFSET_MODE ? 4069 : 4340) * (val >> 1);
*offset = (value & PCF8523_OFFSET_MODE ? 4069 : 4340) * (val >> 1);
return 0;
}
......@@ -465,9 +465,9 @@ static int pcf8523_rtc_set_offset(struct device *dev, long offset)
if (abs(reg_m0 * 4340 - offset) < abs(reg_m1 * 4069 - offset))
value = reg_m0 & 0x7f;
else
value = (reg_m1 & 0x7f) | REG_OFFSET_MODE;
value = (reg_m1 & 0x7f) | PCF8523_OFFSET_MODE;
return pcf8523_write(client, REG_OFFSET, value);
return pcf8523_write(client, PCF8523_REG_OFFSET, value);
}
static const struct rtc_class_ops pcf8523_rtc_ops = {
......@@ -519,7 +519,7 @@ static int pcf8523_probe(struct i2c_client *client,
rtc->uie_unsupported = 1;
if (client->irq > 0) {
err = pcf8523_write(client, REG_TMR_CLKOUT_CTRL, 0x38);
err = pcf8523_write(client, PCF8523_TMR_CLKOUT_CTRL, 0x38);
if (err < 0)
return err;
......
......@@ -8,7 +8,7 @@
*
* based on the other drivers in this same directory.
*
* http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
* https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf
*/
#include <linux/clk-provider.h>
......
// SPDX-License-Identifier: GPL-2.0+
/*
* Realtek RTD129x RTC
*
* Copyright (c) 2017 Andreas Färber
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/clk.h>
......
......@@ -488,9 +488,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
dev_dbg(dev, "%s: %ptR(%d)\n", __func__, &alrm->time, alrm->time.tm_wday);
ret = s5m_check_peding_alarm_interrupt(info, alrm);
return 0;
return s5m_check_peding_alarm_interrupt(info, alrm);
}
static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2017 Spreadtrum Communications Inc.
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <linux/bitops.h>
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* drivers/rtc/rtc-spear.c
*
* Copyright (C) 2010 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/bcd.h>
......
......@@ -754,7 +754,7 @@ static int stm32_rtc_probe(struct platform_device *pdev)
ret = clk_prepare_enable(rtc->rtc_ck);
if (ret)
goto err;
goto err_no_rtc_ck;
if (rtc->data->need_dbp)
regmap_update_bits(rtc->dbp, rtc->dbp_reg,
......@@ -830,10 +830,12 @@ static int stm32_rtc_probe(struct platform_device *pdev)
}
return 0;
err:
clk_disable_unprepare(rtc->rtc_ck);
err_no_rtc_ck:
if (rtc->data->has_pclk)
clk_disable_unprepare(rtc->pclk);
clk_disable_unprepare(rtc->rtc_ck);
if (rtc->data->need_dbp)
regmap_update_bits(rtc->dbp, rtc->dbp_reg, rtc->dbp_mask, 0);
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* rtc-tps6586x.c: RTC driver for TI PMIC TPS6586X
*
* Copyright (c) 2012, NVIDIA Corporation.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307, USA
*/
#include <linux/device.h>
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* rtc-tps80031.c -- TI TPS80031/TPS80032 RTC driver
*
......@@ -7,20 +8,6 @@
* Copyright (c) 2012, NVIDIA Corporation.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307, USA
*/
#include <linux/bcd.h>
......
......@@ -282,7 +282,7 @@ static int rtc_probe(struct platform_device *pdev)
{
struct v3020_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct v3020 *chip;
int retval = -EBUSY;
int retval;
int i;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
......
......@@ -102,7 +102,7 @@ max_user_freq_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_RW(max_user_freq);
/**
* rtc_sysfs_show_hctosys - indicate if the given RTC set the system time
* hctosys_show - indicate if the given RTC set the system time
* @dev: The device that the attribute belongs to.
* @attr: The attribute being read.
* @buf: The result buffer.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment