Commit de65ded4 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'socfpga_updates_for_3.15_v2' of...

Merge tag 'socfpga_updates_for_3.15_v2' of git://git.rocketboards.org/linux-socfpga-next into next/drivers

Merge "SOCFPGA updates for 3.15 version 2" from Dinh Nguyen:

*Update SOCFPGA DTS to include ethernet, sd/mmc, and clock fixes
*Add stmmac ethernet glue layer
*Update socfpga_defconfig to include sd/mmc, and micrel_phy

* tag 'socfpga_updates_for_3.15_v2' of git://git.rocketboards.org/linux-socfpga-next:
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents a929478f a5d6ac2a
* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
Storage Host Controller
The Synopsys designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core Synopsys dw mshc controller properties described
by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
extensions to the Synopsys Designware Mobile Storage Host Controller.
Required Properties:
* compatible: should be
- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
Example:
mmc: dwmmc0@ff704000 {
compatible = "altr,socfpga-dw-mshc";
reg = <0xff704000 0x1000>;
interrupts = <0 129 4>;
#address-cells = <1>;
#size-cells = <0>;
};
Altera SOCFPGA SoC DWMAC controller
The device node has following properties.
Required properties:
- compatible : Should contain "altr,socfpga-stmmac"
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
encompasses the glue register, and the register offset.
Sub-nodes:
The dwmac core should be added as subnode to SOCFPGA dwmac glue.
- dwmac : The binding details of dwmac can be found in
Documentation/devicetree/bindings/net/stmmac.txt
Example:
ethernet0: ethernet0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,socfpga-stmmac";
altr,sysmgr-syscon = <&sysmgr 0x60>;
status = "disabled";
ranges;
gmac0: gmac0@ff700000 {
compatible = "snps,dwmac-3.70a", "snps,dwmac";
reg = <0xff700000 0x2000>;
interrupts = <0 115 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac0_clk>;
clock-names = "stmmaceth";
};
};
......@@ -92,7 +92,12 @@ clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: osc1 {
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
osc2: osc2 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
......@@ -100,7 +105,11 @@ osc: osc1 {
f2s_periph_ref_clk: f2s_periph_ref_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <10000000>;
};
f2s_sdram_ref_clk: f2s_sdram_ref_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
};
main_pll: main_pll {
......@@ -108,7 +117,7 @@ main_pll: main_pll {
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc>;
clocks = <&osc1>;
reg = <0x40>;
mpuclk: mpuclk {
......@@ -162,7 +171,7 @@ periph_pll: periph_pll {
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc>;
clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
reg = <0x80>;
emac0_clk: emac0_clk {
......@@ -213,7 +222,7 @@ sdram_pll: sdram_pll {
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc>;
clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
reg = <0xC0>;
ddr_dqs_clk: ddr_dqs_clk {
......@@ -441,26 +450,43 @@ qspi_clk: qspi_clk {
};
};
gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
ethernet0: ethernet0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,socfpga-stmmac";
altr,sysmgr-syscon = <&sysmgr 0x60>;
status = "disabled";
ranges;
gmac0: gmac0@ff700000 {
compatible = "snps,dwmac-3.70a", "snps,dwmac";
reg = <0xff700000 0x2000>;
interrupts = <0 115 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac0_clk>;
clock-names = "stmmaceth";
status = "disabled";
};
};
ethernet1: ethernet1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,socfpga-stmmac";
altr,sysmgr-syscon = <&sysmgr 0x60>;
status = "disabled";
ranges;
gmac1: ethernet@ff702000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
gmac1: gmac1@ff702000 {
device_type = "network";
compatible = "snps,dwmac-3.70a", "snps,dwmac";
reg = <0xff702000 0x2000>;
interrupts = <0 120 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac1_clk>;
clock-names = "stmmaceth";
status = "disabled";
};
};
L2: l2-cache@fffef000 {
......@@ -473,6 +499,17 @@ L2: l2-cache@fffef000 {
arm,data-latency = <2 1 1>;
};
mmc: dwmmc0@ff704000 {
compatible = "altr,socfpga-dw-mshc";
reg = <0xff704000 0x1000>;
interrupts = <0 139 4>;
fifo-depth = <0x400>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&l4_mp_clk>, <&sdmmc_clk>;
clock-names = "biu", "ciu";
};
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
......@@ -526,8 +563,8 @@ rstmgr@ffd05000 {
reg = <0xffd05000 0x1000>;
};
sysmgr@ffd08000 {
compatible = "altr,sys-mgr";
sysmgr: sysmgr@ffd08000 {
compatible = "altr,sys-mgr", "syscon";
reg = <0xffd08000 0x4000>;
};
};
......
......@@ -27,6 +27,17 @@ osc1 {
};
};
dwmmc0@ff704000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
serial0@ffc02000 {
clock-frequency = <100000000>;
};
......
......@@ -37,4 +37,28 @@ aliases {
*/
ethernet0 = &gmac1;
};
aliases {
/* this allow the ethaddr uboot environmnet variable contents
* to be added to the gmac1 device tree blob.
*/
ethernet0 = &gmac1;
};
};
&ethernet1 {
status = "okay";
};
&gmac1 {
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txen-skew-ps = <0>;
txc-skew-ps = <2600>;
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
......@@ -28,6 +28,17 @@ osc1 {
};
};
dwmmc0@ff704000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
ethernet@ff702000 {
phy-mode = "rgmii";
phy-addr = <0xffffffff>; /* probe for phy addr */
......
......@@ -38,3 +38,20 @@ aliases {
ethernet0 = &gmac1;
};
};
&ethernet1 {
status = "okay";
};
&gmac1 {
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txen-skew-ps = <0>;
txc-skew-ps = <2600>;
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
......@@ -30,8 +30,28 @@ memory {
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
aliases {
/* this allow the ethaddr uboot environmnet variable contents
* to be added to the gmac1 device tree blob.
*/
ethernet0 = &gmac1;
};
};
&gmac1 {
&ethernet1 {
status = "okay";
};
&gmac1 {
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txen-skew-ps = <0>;
txc-skew-ps = <2600>;
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
......@@ -41,6 +41,17 @@ osc1 {
};
};
dwmmc0@ff704000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
ethernet@ff700000 {
phy-mode = "gmii";
status = "okay";
......@@ -75,3 +86,11 @@ sysmgr@ffd08000 {
};
};
};
&ethernet0 {
status = "okay";
};
&gmac0 {
phy-mode = "gmii";
};
......@@ -52,6 +52,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
CONFIG_MICREL_PHY=y
# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
......@@ -66,6 +67,9 @@ CONFIG_SERIAL_8250_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_VFAT_FS=y
......@@ -82,3 +86,5 @@ CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
obj-$(CONFIG_STMMAC_ETH) += stmmac.o
stmmac-$(CONFIG_ARCH_SOCFPGA) += dwmac-socfpga.o
stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
......
/* Copyright (C) 2014 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Adopted from dwmac-sti.c
*/
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/stmmac.h>
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
struct socfpga_dwmac {
int interface;
u32 reg_offset;
struct device *dev;
struct regmap *sys_mgr_base_addr;
struct device_node *dwmac_np;
};
static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
{
struct device_node *np = dev->of_node;
struct device_node *stmmac_np;
struct regmap *sys_mgr_base_addr;
u32 reg_offset;
int ret;
stmmac_np = of_get_next_available_child(np, NULL);
if (!stmmac_np) {
dev_info(dev, "No dwmac node found\n");
return -EINVAL;
}
if (!of_device_is_compatible(stmmac_np, "snps,dwmac")) {
dev_info(dev, "dwmac node isn't compatible with snps,dwmac\n");
return -EINVAL;
}
dwmac->interface = of_get_phy_mode(stmmac_np);
of_node_put(stmmac_np);
sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
if (IS_ERR(sys_mgr_base_addr)) {
dev_info(dev, "No sysmgr-syscon node found\n");
return PTR_ERR(sys_mgr_base_addr);
}
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, &reg_offset);
if (ret) {
dev_info(dev, "Could not reg_offset into sysmgr-syscon!\n");
return -EINVAL;
}
dwmac->reg_offset = reg_offset;
dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
dwmac->dwmac_np = stmmac_np;
dwmac->dev = dev;
return 0;
}
static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
{
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
int phymode = dwmac->interface;
u32 reg_offset = dwmac->reg_offset;
u32 ctrl, val, shift = 0;
if (of_machine_is_compatible("altr,socfpga-vt"))
return 0;
switch (phymode) {
case PHY_INTERFACE_MODE_RGMII:
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
break;
case PHY_INTERFACE_MODE_MII:
case PHY_INTERFACE_MODE_GMII:
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
break;
default:
dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
return -EINVAL;
}
regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << shift);
ctrl |= val << shift;
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
return 0;
}
static int socfpga_dwmac_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
int ret = -ENOMEM;
struct socfpga_dwmac *dwmac;
dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
return -ENOMEM;
ret = socfpga_dwmac_parse_data(dwmac, dev);
if (ret) {
dev_err(dev, "Unable to parse OF data\n");
return ret;
}
ret = socfpga_dwmac_setup(dwmac);
if (ret) {
dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
return ret;
}
if (node) {
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to add dwmac core\n");
return ret;
}
} else {
dev_err(dev, "no device node, failed to add dwmac core\n");
return -ENODEV;
}
platform_set_drvdata(pdev, dwmac);
return 0;
}
static int socfpga_dwmac_remove(struct platform_device *pdev)
{
return 0;
}
static const struct of_device_id socfpga_dwmac_match[] = {
{ .compatible = "altr,socfpga-stmmac" },
{},
};
MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
static struct platform_driver socfpga_dwmac_driver = {
.probe = socfpga_dwmac_probe,
.remove = socfpga_dwmac_remove,
.driver = {
.name = "socfpga-dwmac",
.of_match_table = of_match_ptr(socfpga_dwmac_match),
},
};
module_platform_driver(socfpga_dwmac_driver);
MODULE_ALIAS("platform:socfpga-dwmac");
MODULE_AUTHOR("Dinh Nguyen <dinguyen@altera.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Altera SOCFPGA DWMAC Glue Layer");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment