Skip to content

L
linux
Commit deb14362 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'samsung-late-cpufreq-driver' of... 

Merge tag 'samsung-late-cpufreq-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late

Samsung cpufreq driver updates for v4.3

- remove exynos4 SoCs and exynos5250 specific cpufreq driver support
  and unselectable rule for arm-exynos-cpufreq.o because of supporting
  generic cpufreq driver for the exynos SoCs

* Note this is depending on tags/samsung-clk-driver, tags/samsung-soc
  and tags/samsung-late-dt

* tag 'samsung-late-cpufreq-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
  cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
  cpufreq: exynos: remove exynos5250 specific cpufreq driver support
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 418012fb 5e3863a7
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 825 deletions
drivers/cpufreq/Kconfig.arm
View file @ deb14362
...@@ -24,55 +24,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ ...@@ -24,55 +24,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ
This add the CPUfreq driver support for Versatile Express This add the CPUfreq driver support for Versatile Express
big.LITTLE platforms using SPC for power management. big.LITTLE platforms using SPC for power management.
config ARM_EXYNOS_CPUFREQ
tristate "SAMSUNG EXYNOS CPUfreq Driver"
depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
depends on THERMAL
help
This adds the CPUFreq driver for Samsung EXYNOS platforms.
Supported SoC versions are:
Exynos4210, Exynos4212, Exynos4412, and Exynos5250.
If in doubt, say N.
config ARM_EXYNOS4X12_CPUFREQ
bool "SAMSUNG EXYNOS4x12"
depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
depends on ARM_EXYNOS_CPUFREQ
default y
help
This adds the CPUFreq driver for Samsung EXYNOS4X12
SoC (EXYNOS4212 or EXYNOS4412).
If in doubt, say N.
config ARM_EXYNOS5250_CPUFREQ
bool "SAMSUNG EXYNOS5250"
depends on SOC_EXYNOS5250
depends on ARM_EXYNOS_CPUFREQ
default y
help
This adds the CPUFreq driver for Samsung EXYNOS5250
SoC.
If in doubt, say N.
config ARM_EXYNOS_CPU_FREQ_BOOST_SW
bool "EXYNOS Frequency Overclocking - Software"
depends on ARM_EXYNOS_CPUFREQ && THERMAL
select CPU_FREQ_BOOST_SW
select EXYNOS_THERMAL
help
This driver supports software managed overclocking (BOOST).
It allows usage of special frequencies for Samsung Exynos
processors if thermal conditions are appropriate.
It requires, for safe operation, thermal framework with properly
defined trip points.
If in doubt, say N.
config ARM_EXYNOS5440_CPUFREQ config ARM_EXYNOS5440_CPUFREQ
tristate "SAMSUNG EXYNOS5440" tristate "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440 depends on SOC_EXYNOS5440
......
drivers/cpufreq/Makefile
View file @ deb14362
...@@ -52,10 +52,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o ...@@ -52,10 +52,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o
arm-exynos-cpufreq-y := exynos-cpufreq.o
arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
......
drivers/cpufreq/exynos-cpufreq.c deleted 100644 → 0
View file @ 418012fb
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - CPU frequency scaling support for EXYNOS series
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/cpu_cooling.h>
#include <linux/cpu.h>
#include "exynos-cpufreq.h"
static struct exynos_dvfs_info *exynos_info;
static struct thermal_cooling_device *cdev;
static struct regulator *arm_regulator;
static unsigned int locking_frequency;
static int exynos_cpufreq_get_index(unsigned int freq)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
struct cpufreq_frequency_table *pos;
cpufreq_for_each_entry(pos, freq_table)
if (pos->frequency == freq)
break;
if (pos->frequency == CPUFREQ_TABLE_END)
return -EINVAL;
return pos - freq_table;
}
static int exynos_cpufreq_scale(unsigned int target_freq)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
unsigned int *volt_table = exynos_info->volt_table;
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
unsigned int arm_volt, safe_arm_volt = 0;
unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
struct device *dev = exynos_info->dev;
unsigned int old_freq;
int index, old_index;
int ret = 0;
old_freq = policy->cur;
/*
* The policy max have been changed so that we cannot get proper
* old_index with cpufreq_frequency_table_target(). Thus, ignore
* policy and get the index from the raw frequency table.
*/
old_index = exynos_cpufreq_get_index(old_freq);
if (old_index < 0) {
ret = old_index;
goto out;
}
index = exynos_cpufreq_get_index(target_freq);
if (index < 0) {
ret = index;
goto out;
}
/*
* ARM clock source will be changed APLL to MPLL temporary
* To support this level, need to control regulator for
* required voltage level
*/
if (exynos_info->need_apll_change != NULL) {
if (exynos_info->need_apll_change(old_index, index) &&
(freq_table[index].frequency < mpll_freq_khz) &&
(freq_table[old_index].frequency < mpll_freq_khz))
safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
}
arm_volt = volt_table[index];
/* When the new frequency is higher than current frequency */
if ((target_freq > old_freq) && !safe_arm_volt) {
/* Firstly, voltage up to increase frequency */
ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
if (ret) {
dev_err(dev, "failed to set cpu voltage to %d\n",
arm_volt);
return ret;
}
}
if (safe_arm_volt) {
ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
safe_arm_volt);
if (ret) {
dev_err(dev, "failed to set cpu voltage to %d\n",
safe_arm_volt);
return ret;
}
}
exynos_info->set_freq(old_index, index);
/* When the new frequency is lower than current frequency */
if ((target_freq < old_freq) ||
((target_freq > old_freq) && safe_arm_volt)) {
/* down the voltage after frequency change */
ret = regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
if (ret) {
dev_err(dev, "failed to set cpu voltage to %d\n",
arm_volt);
goto out;
}
}
out:
cpufreq_cpu_put(policy);
return ret;
}
static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
{
return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency);
}
static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
policy->clk = exynos_info->cpu_clk;
policy->suspend_freq = locking_frequency;
return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
}
static struct cpufreq_driver exynos_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = exynos_target,
.get = cpufreq_generic_get,
.init = exynos_cpufreq_cpu_init,
.name = "exynos_cpufreq",
.attr = cpufreq_generic_attr,
#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
.boost_supported = true,
#endif
#ifdef CONFIG_PM
.suspend = cpufreq_generic_suspend,
#endif
};
static int exynos_cpufreq_probe(struct platform_device *pdev)
{
struct device_node *cpu0;
int ret = -EINVAL;
exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
if (!exynos_info)
return -ENOMEM;
exynos_info->dev = &pdev->dev;
if (of_machine_is_compatible("samsung,exynos4212")) {
exynos_info->type = EXYNOS_SOC_4212;
ret = exynos4x12_cpufreq_init(exynos_info);
} else if (of_machine_is_compatible("samsung,exynos4412")) {
exynos_info->type = EXYNOS_SOC_4412;
ret = exynos4x12_cpufreq_init(exynos_info);
} else if (of_machine_is_compatible("samsung,exynos5250")) {
exynos_info->type = EXYNOS_SOC_5250;
ret = exynos5250_cpufreq_init(exynos_info);
} else {
pr_err("%s: Unknown SoC type\n", __func__);
return -ENODEV;
}
if (ret)
goto err_vdd_arm;
if (exynos_info->set_freq == NULL) {
dev_err(&pdev->dev, "No set_freq function (ERR)\n");
goto err_vdd_arm;
}
arm_regulator = regulator_get(NULL, "vdd_arm");
if (IS_ERR(arm_regulator)) {
dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
goto err_vdd_arm;
}
/* Done here as we want to capture boot frequency */
locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
ret = cpufreq_register_driver(&exynos_driver);
if (ret)
goto err_cpufreq_reg;
cpu0 = of_get_cpu_node(0, NULL);
if (!cpu0) {
pr_err("failed to find cpu0 node\n");
return 0;
}
if (of_find_property(cpu0, "#cooling-cells", NULL)) {
cdev = of_cpufreq_cooling_register(cpu0,
cpu_present_mask);
if (IS_ERR(cdev))
pr_err("running cpufreq without cooling device: %ld\n",
PTR_ERR(cdev));
}
return 0;
err_cpufreq_reg:
dev_err(&pdev->dev, "failed to register cpufreq driver\n");
regulator_put(arm_regulator);
err_vdd_arm:
kfree(exynos_info);
return -EINVAL;
}
static struct platform_driver exynos_cpufreq_platdrv = {
.driver = {
.name = "exynos-cpufreq",
},
.probe = exynos_cpufreq_probe,
};
module_platform_driver(exynos_cpufreq_platdrv);
drivers/cpufreq/exynos-cpufreq.h deleted 100644 → 0
View file @ 418012fb
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - CPUFreq support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
enum cpufreq_level_index {
L0, L1, L2, L3, L4,
L5, L6, L7, L8, L9,
L10, L11, L12, L13, L14,
L15, L16, L17, L18, L19,
L20,
};
enum exynos_soc_type {
EXYNOS_SOC_4212,
EXYNOS_SOC_4412,
EXYNOS_SOC_5250,
};
#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
{ \
.freq = (f) * 1000, \
.clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \
(a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \
.clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
.mps = ((m) << 16 | (p) << 8 | (s)), \
}
struct apll_freq {
unsigned int freq;
u32 clk_div_cpu0;
u32 clk_div_cpu1;
u32 mps;
};
struct exynos_dvfs_info {
enum exynos_soc_type type;
struct device *dev;
unsigned long mpll_freq_khz;
unsigned int pll_safe_idx;
struct clk *cpu_clk;
unsigned int *volt_table;
struct cpufreq_frequency_table *freq_table;
void (*set_freq)(unsigned int, unsigned int);
bool (*need_apll_change)(unsigned int, unsigned int);
void __iomem *cmu_regs;
};
#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
#else
static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
{
return -EOPNOTSUPP;
}
#endif
#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ
extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
#else
static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
{
return -EOPNOTSUPP;
}
#endif
#define EXYNOS4_CLKSRC_CPU 0x14200
#define EXYNOS4_CLKMUX_STATCPU 0x14400
#define EXYNOS4_CLKDIV_CPU 0x14500
#define EXYNOS4_CLKDIV_CPU1 0x14504
#define EXYNOS4_CLKDIV_STATCPU 0x14600
#define EXYNOS4_CLKDIV_STATCPU1 0x14604
#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
#define EXYNOS5_APLL_LOCK 0x00000
#define EXYNOS5_APLL_CON0 0x00100
#define EXYNOS5_CLKMUX_STATCPU 0x00400
#define EXYNOS5_CLKDIV_CPU0 0x00500
#define EXYNOS5_CLKDIV_CPU1 0x00504
#define EXYNOS5_CLKDIV_STATCPU0 0x00600
#define EXYNOS5_CLKDIV_STATCPU1 0x00604
drivers/cpufreq/exynos4x12-cpufreq.c deleted 100644 → 0
View file @ 418012fb
/*
* Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4X12 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include "exynos-cpufreq.h"
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
static struct exynos_dvfs_info *cpufreq;
static unsigned int exynos4x12_volt_table[] = {
1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
1000000, 987500, 975000, 950000, 925000, 900000, 900000
};
static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
{CPUFREQ_BOOST_FREQ, L0, 1500 * 1000},
{0, L1, 1400 * 1000},
{0, L2, 1300 * 1000},
{0, L3, 1200 * 1000},
{0, L4, 1100 * 1000},
{0, L5, 1000 * 1000},
{0, L6, 900 * 1000},
{0, L7, 800 * 1000},
{0, L8, 700 * 1000},
{0, L9, 600 * 1000},
{0, L10, 500 * 1000},
{0, L11, 400 * 1000},
{0, L12, 300 * 1000},
{0, L13, 200 * 1000},
{0, 0, CPUFREQ_TABLE_END},
};
static struct apll_freq *apll_freq_4x12;
static struct apll_freq apll_freq_4212[] = {
/*
* values:
* freq
* clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
* clock divider for COPY, HPM, RESERVED
* PLL M, P, S
*/
APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
};
static struct apll_freq apll_freq_4412[] = {
/*
* values:
* freq
* clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2
* clock divider for COPY, HPM, CORES
* PLL M, P, S
*/
APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
};
static void exynos4x12_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
/* Change Divider - CPU0 */
tmp = apll_freq_4x12[div_index].clk_div_cpu0;
__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
& 0x11111111)
cpu_relax();
/* Change Divider - CPU1 */
tmp = apll_freq_4x12[div_index].clk_div_cpu1;
__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
do {
cpu_relax();
tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
} while (tmp != 0x0);
}
static void exynos4x12_set_apll(unsigned int index)
{
unsigned int tmp, freq = apll_freq_4x12[index].freq;
/* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
clk_set_parent(moutcore, mout_mpll);
do {
cpu_relax();
tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
tmp &= 0x7;
} while (tmp != 0x2);
clk_set_rate(mout_apll, freq * 1000);
/* MUX_CORE_SEL = APLL */
clk_set_parent(moutcore, mout_apll);
do {
cpu_relax();
tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
}
static void exynos4x12_set_frequency(unsigned int old_index,
unsigned int new_index)
{
if (old_index > new_index) {
exynos4x12_set_clkdiv(new_index);
exynos4x12_set_apll(new_index);
} else if (old_index < new_index) {
exynos4x12_set_apll(new_index);
exynos4x12_set_clkdiv(new_index);
}
}
int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
{
struct device_node *np;
unsigned long rate;
/*
* HACK: This is a temporary workaround to get access to clock
* controller registers directly and remove static mappings and
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
* cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
if (!np) {
pr_err("%s: failed to find clock controller DT node\n",
__func__);
return -ENODEV;
}
info->cmu_regs = of_iomap(np, 0);
if (!info->cmu_regs) {
pr_err("%s: failed to map CMU registers\n", __func__);
return -EFAULT;
}
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
goto err_moutcore;
mout_mpll = clk_get(NULL, "mout_mpll");
if (IS_ERR(mout_mpll))
goto err_mout_mpll;
rate = clk_get_rate(mout_mpll) / 1000;
mout_apll = clk_get(NULL, "mout_apll");
if (IS_ERR(mout_apll))
goto err_mout_apll;
if (info->type == EXYNOS_SOC_4212)
apll_freq_4x12 = apll_freq_4212;
else
apll_freq_4x12 = apll_freq_4412;
info->mpll_freq_khz = rate;
/* 800Mhz */
info->pll_safe_idx = L7;
info->cpu_clk = cpu_clk;
info->volt_table = exynos4x12_volt_table;
info->freq_table = exynos4x12_freq_table;
info->set_freq = exynos4x12_set_frequency;
cpufreq = info;
return 0;
err_mout_apll:
clk_put(mout_mpll);
err_mout_mpll:
clk_put(moutcore);
err_moutcore:
clk_put(cpu_clk);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
drivers/cpufreq/exynos5250-cpufreq.c deleted 100644 → 0
View file @ 418012fb
/*
* Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS5250 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include "exynos-cpufreq.h"
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
static struct exynos_dvfs_info *cpufreq;
static unsigned int exynos5250_volt_table[] = {
1300000, 1250000, 1225000, 1200000, 1150000,
1125000, 1100000, 1075000, 1050000, 1025000,
1012500, 1000000, 975000, 950000, 937500,
925000
};
static struct cpufreq_frequency_table exynos5250_freq_table[] = {
{0, L0, 1700 * 1000},
{0, L1, 1600 * 1000},
{0, L2, 1500 * 1000},
{0, L3, 1400 * 1000},
{0, L4, 1300 * 1000},
{0, L5, 1200 * 1000},
{0, L6, 1100 * 1000},
{0, L7, 1000 * 1000},
{0, L8, 900 * 1000},
{0, L9, 800 * 1000},
{0, L10, 700 * 1000},
{0, L11, 600 * 1000},
{0, L12, 500 * 1000},
{0, L13, 400 * 1000},
{0, L14, 300 * 1000},
{0, L15, 200 * 1000},
{0, 0, CPUFREQ_TABLE_END},
};
static struct apll_freq apll_freq_5250[] = {
/*
* values:
* freq
* clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
* clock divider for COPY, HPM, RESERVED
* PLL M, P, S
*/
APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
};
static void set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
/* Change Divider - CPU0 */
tmp = apll_freq_5250[div_index].clk_div_cpu0;
__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
& 0x11111111)
cpu_relax();
/* Change Divider - CPU1 */
tmp = apll_freq_5250[div_index].clk_div_cpu1;
__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
cpu_relax();
}
static void set_apll(unsigned int index)
{
unsigned int tmp;
unsigned int freq = apll_freq_5250[index].freq;
/* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
clk_set_parent(moutcore, mout_mpll);
do {
cpu_relax();
tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
>> 16);
tmp &= 0x7;
} while (tmp != 0x2);
clk_set_rate(mout_apll, freq * 1000);
/* MUX_CORE_SEL = APLL */
clk_set_parent(moutcore, mout_apll);
do {
cpu_relax();
tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
tmp &= (0x7 << 16);
} while (tmp != (0x1 << 16));
}
static void exynos5250_set_frequency(unsigned int old_index,
unsigned int new_index)
{
if (old_index > new_index) {
set_clkdiv(new_index);
set_apll(new_index);
} else if (old_index < new_index) {
set_apll(new_index);
set_clkdiv(new_index);
}
}
int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
{
struct device_node *np;
unsigned long rate;
/*
* HACK: This is a temporary workaround to get access to clock
* controller registers directly and remove static mappings and
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
* cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
if (!np) {
pr_err("%s: failed to find clock controller DT node\n",
__func__);
return -ENODEV;
}
info->cmu_regs = of_iomap(np, 0);
if (!info->cmu_regs) {
pr_err("%s: failed to map CMU registers\n", __func__);
return -EFAULT;
}
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
moutcore = clk_get(NULL, "mout_cpu");
if (IS_ERR(moutcore))
goto err_moutcore;
mout_mpll = clk_get(NULL, "mout_mpll");
if (IS_ERR(mout_mpll))
goto err_mout_mpll;
rate = clk_get_rate(mout_mpll) / 1000;
mout_apll = clk_get(NULL, "mout_apll");
if (IS_ERR(mout_apll))
goto err_mout_apll;
info->mpll_freq_khz = rate;
/* 800Mhz */
info->pll_safe_idx = L9;
info->cpu_clk = cpu_clk;
info->volt_table = exynos5250_volt_table;
info->freq_table = exynos5250_freq_table;
info->set_freq = exynos5250_set_frequency;
cpufreq = info;
return 0;
err_mout_apll:
clk_put(mout_mpll);
err_mout_mpll:
clk_put(moutcore);
err_moutcore:
clk_put(cpu_clk);
pr_err("%s: failed initialization\n", __func__);
return -EINVAL;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7