Commit deec9ae3 authored by Haavard Skinnemoen's avatar Haavard Skinnemoen Committed by Pierre Ossman

atmel-mci: debugfs support

Create additional files under the host's debugfs directory containing
additional host-specific debug information.
Signed-off-by: default avatarHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: default avatarPierre Ossman <drzeus@drzeus.cx>
parent f4b7f927
...@@ -82,6 +82,8 @@ ...@@ -82,6 +82,8 @@
# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ # define MCI_OVRE ( 1 << 30) /* RX Overrun Error */
# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ # define MCI_UNRE ( 1 << 31) /* TX Underrun Error */
#define MCI_REGS_SIZE 0x100
/* Register access macros */ /* Register access macros */
#define mci_readl(port,reg) \ #define mci_readl(port,reg) \
__raw_readl((port)->regs + MCI_##reg) __raw_readl((port)->regs + MCI_##reg)
......
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
*/ */
#include <linux/blkdev.h> #include <linux/blkdev.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
...@@ -16,6 +17,8 @@ ...@@ -16,6 +17,8 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/scatterlist.h> #include <linux/scatterlist.h>
#include <linux/seq_file.h>
#include <linux/stat.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
...@@ -88,6 +91,188 @@ struct atmel_mci { ...@@ -88,6 +91,188 @@ struct atmel_mci {
#define atmci_clear_pending(host, event) \ #define atmci_clear_pending(host, event) \
clear_bit(event, &host->pending_events) clear_bit(event, &host->pending_events)
/*
* The debugfs stuff below is mostly optimized away when
* CONFIG_DEBUG_FS is not set.
*/
static int atmci_req_show(struct seq_file *s, void *v)
{
struct atmel_mci *host = s->private;
struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd;
struct mmc_command *stop;
struct mmc_data *data;
/* Make sure we get a consistent snapshot */
spin_lock_irq(&host->mmc->lock);
if (mrq) {
cmd = mrq->cmd;
data = mrq->data;
stop = mrq->stop;
if (cmd)
seq_printf(s,
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
cmd->opcode, cmd->arg, cmd->flags,
cmd->resp[0], cmd->resp[1], cmd->resp[2],
cmd->resp[2], cmd->error);
if (data)
seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
data->bytes_xfered, data->blocks,
data->blksz, data->flags, data->error);
if (stop)
seq_printf(s,
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
stop->opcode, stop->arg, stop->flags,
stop->resp[0], stop->resp[1], stop->resp[2],
stop->resp[2], stop->error);
}
spin_unlock_irq(&host->mmc->lock);
return 0;
}
static int atmci_req_open(struct inode *inode, struct file *file)
{
return single_open(file, atmci_req_show, inode->i_private);
}
static const struct file_operations atmci_req_fops = {
.owner = THIS_MODULE,
.open = atmci_req_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void atmci_show_status_reg(struct seq_file *s,
const char *regname, u32 value)
{
static const char *sr_bit[] = {
[0] = "CMDRDY",
[1] = "RXRDY",
[2] = "TXRDY",
[3] = "BLKE",
[4] = "DTIP",
[5] = "NOTBUSY",
[8] = "SDIOIRQA",
[9] = "SDIOIRQB",
[16] = "RINDE",
[17] = "RDIRE",
[18] = "RCRCE",
[19] = "RENDE",
[20] = "RTOE",
[21] = "DCRCE",
[22] = "DTOE",
[30] = "OVRE",
[31] = "UNRE",
};
unsigned int i;
seq_printf(s, "%s:\t0x%08x", regname, value);
for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
if (value & (1 << i)) {
if (sr_bit[i])
seq_printf(s, " %s", sr_bit[i]);
else
seq_puts(s, " UNKNOWN");
}
}
seq_putc(s, '\n');
}
static int atmci_regs_show(struct seq_file *s, void *v)
{
struct atmel_mci *host = s->private;
u32 *buf;
buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* Grab a more or less consistent snapshot */
spin_lock_irq(&host->mmc->lock);
memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
spin_unlock_irq(&host->mmc->lock);
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
buf[MCI_MR / 4],
buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
buf[MCI_MR / 4] & 0xff);
seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
buf[MCI_BLKR / 4],
buf[MCI_BLKR / 4] & 0xffff,
(buf[MCI_BLKR / 4] >> 16) & 0xffff);
/* Don't read RSPR and RDR; it will consume the data there */
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
return 0;
}
static int atmci_regs_open(struct inode *inode, struct file *file)
{
return single_open(file, atmci_regs_show, inode->i_private);
}
static const struct file_operations atmci_regs_fops = {
.owner = THIS_MODULE,
.open = atmci_regs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void atmci_init_debugfs(struct atmel_mci *host)
{
struct mmc_host *mmc;
struct dentry *root;
struct dentry *node;
struct resource *res;
mmc = host->mmc;
root = mmc->debugfs_root;
if (!root)
return;
node = debugfs_create_file("regs", S_IRUSR, root, host,
&atmci_regs_fops);
if (IS_ERR(node))
return;
if (!node)
goto err;
res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
node->d_inode->i_size = res->end - res->start + 1;
node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
if (!node)
goto err;
node = debugfs_create_x32("pending_events", S_IRUSR, root,
(u32 *)&host->pending_events);
if (!node)
goto err;
node = debugfs_create_x32("completed_events", S_IRUSR, root,
(u32 *)&host->completed_events);
if (!node)
goto err;
return;
err:
dev_err(&host->pdev->dev,
"failed to initialize debugfs for controller\n");
}
static void atmci_enable(struct atmel_mci *host) static void atmci_enable(struct atmel_mci *host)
{ {
...@@ -905,6 +1090,8 @@ static int __init atmci_probe(struct platform_device *pdev) ...@@ -905,6 +1090,8 @@ static int __init atmci_probe(struct platform_device *pdev)
"Atmel MCI controller at 0x%08lx irq %d\n", "Atmel MCI controller at 0x%08lx irq %d\n",
host->mapbase, irq); host->mapbase, irq);
atmci_init_debugfs(host);
return 0; return 0;
err_request_irq: err_request_irq:
...@@ -923,6 +1110,8 @@ static int __exit atmci_remove(struct platform_device *pdev) ...@@ -923,6 +1110,8 @@ static int __exit atmci_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL); platform_set_drvdata(pdev, NULL);
if (host) { if (host) {
/* Debugfs stuff is cleaned up by mmc core */
if (host->detect_pin >= 0) { if (host->detect_pin >= 0) {
int pin = host->detect_pin; int pin = host->detect_pin;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment