MIPS: mm: compile maar_init unconditionally

maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES
was not set, which has been fine since it is only called from the
standard implementation of mem_init which has the same condition. In
preparation for calling it from the SMP startup code on secondary CPUs,
move maar_init outside of the #ifndef such that it is always compiled.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/11237/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/mm/init.c

@@ -252,6 +252,69 @@ void __init fixrange_init(unsigned long start, unsigned long end,
 #endif
 }
 
+unsigned __weak platform_maar_init(unsigned num_pairs)
+{
+	struct maar_config cfg[BOOT_MEM_MAP_MAX];
+	unsigned i, num_configured, num_cfg = 0;
+	phys_addr_t skip;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+		case BOOT_MEM_INIT_RAM:
+			break;
+		default:
+			continue;
+		}
+
+		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
+
+		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
+		cfg[num_cfg].lower += skip;
+
+		cfg[num_cfg].upper = cfg[num_cfg].lower;
+		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
+		cfg[num_cfg].upper -= skip;
+
+		cfg[num_cfg].attrs = MIPS_MAAR_S;
+		num_cfg++;
+	}
+
+	num_configured = maar_config(cfg, num_cfg, num_pairs);
+	if (num_configured < num_cfg)
+		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
+			num_pairs, num_cfg);
+
+	return num_configured;
+}
+
+static void maar_init(void)
+{
+	unsigned num_maars, used, i;
+
+	if (!cpu_has_maar)
+		return;
+
+	/* Detect the number of MAARs */
+	write_c0_maari(~0);
+	back_to_back_c0_hazard();
+	num_maars = read_c0_maari() + 1;
+
+	/* MAARs should be in pairs */
+	WARN_ON(num_maars % 2);
+
+	/* Configure the required MAARs */
+	used = platform_maar_init(num_maars / 2);
+
+	/* Disable any further MAARs */
+	for (i = (used * 2); i < num_maars; i++) {
+		write_c0_maari(i);
+		back_to_back_c0_hazard();
+		write_c0_maar(0);
+		back_to_back_c0_hazard();
+	}
+}
+
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int page_is_ram(unsigned long pagenr)
 {
@@ -334,69 +397,6 @@ static inline void mem_init_free_highmem(void)
 #endif
 }
 
-unsigned __weak platform_maar_init(unsigned num_pairs)
-{
-	struct maar_config cfg[BOOT_MEM_MAP_MAX];
-	unsigned i, num_configured, num_cfg = 0;
-	phys_addr_t skip;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		switch (boot_mem_map.map[i].type) {
-		case BOOT_MEM_RAM:
-		case BOOT_MEM_INIT_RAM:
-			break;
-		default:
-			continue;
-		}
-
-		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
-
-		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
-		cfg[num_cfg].lower += skip;
-
-		cfg[num_cfg].upper = cfg[num_cfg].lower;
-		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
-		cfg[num_cfg].upper -= skip;
-
-		cfg[num_cfg].attrs = MIPS_MAAR_S;
-		num_cfg++;
-	}
-
-	num_configured = maar_config(cfg, num_cfg, num_pairs);
-	if (num_configured < num_cfg)
-		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
-			num_pairs, num_cfg);
-
-	return num_configured;
-}
-
-static void maar_init(void)
-{
-	unsigned num_maars, used, i;
-
-	if (!cpu_has_maar)
-		return;
-
-	/* Detect the number of MAARs */
-	write_c0_maari(~0);
-	back_to_back_c0_hazard();
-	num_maars = read_c0_maari() + 1;
-
-	/* MAARs should be in pairs */
-	WARN_ON(num_maars % 2);
-
-	/* Configure the required MAARs */
-	used = platform_maar_init(num_maars / 2);
-
-	/* Disable any further MAARs */
-	for (i = (used * 2); i < num_maars; i++) {
-		write_c0_maari(i);
-		back_to_back_c0_hazard();
-		write_c0_maar(0);
-		back_to_back_c0_hazard();
-	}
-}
-
 void __init mem_init(void)
 {
 #ifdef CONFIG_HIGHMEM