Commit df2fbf5b authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...
parents 44ebe016 8d485da0
# SPDX-License-Identifier: (GPL-2.0)
# Copyright 2020 Linaro Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Thermal cooling device binding
maintainers:
- Amit Kucheria <amitk@kernel.org>
description: |
Thermal management is achieved in devicetree by describing the sensor hardware
and the software abstraction of cooling devices and thermal zones required to
take appropriate action to mitigate thermal overload.
The following node types are used to completely describe a thermal management
system in devicetree:
- thermal-sensor: device that measures temperature, has SoC-specific bindings
- cooling-device: device used to dissipate heat either passively or actively
- thermal-zones: a container of the following node types used to describe all
thermal data for the platform
This binding describes the cooling devices.
There are essentially two ways to provide control on power dissipation:
- Passive cooling: by means of regulating device performance. A typical
passive cooling mechanism is a CPU that has dynamic voltage and frequency
scaling (DVFS), and uses lower frequencies as cooling states.
- Active cooling: by means of activating devices in order to remove the
dissipated heat, e.g. regulating fan speeds.
Any cooling device has a range of cooling states (i.e. different levels of
heat dissipation). They also have a way to determine the state of cooling in
which the device is. For example, a fan's cooling states correspond to the
different fan speeds possible. Cooling states are referred to by single
unsigned integers, where larger numbers mean greater heat dissipation. The
precise set of cooling states associated with a device should be defined in
a particular device's binding.
select: true
properties:
"#cooling-cells":
description:
Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested.
const: 2
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
// Example 1: Cpufreq cooling device on CPU0
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo385";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
L3_0: l3-cache {
compatible = "cache";
};
};
};
/* ... */
};
/* ... */
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert0>;
/* Corresponds to 1000MHz in OPP table */
cooling-device = <&CPU0 5 5>;
};
};
};
/* ... */
};
...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright 2020 Linaro Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/thermal-idle.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Thermal idle cooling device binding
maintainers:
- Daniel Lezcano <daniel.lezcano@linaro.org>
description: |
The thermal idle cooling device allows the system to passively
mitigate the temperature on the device by injecting idle cycles,
forcing it to cool down.
This binding describes the thermal idle node.
properties:
$nodename:
const: thermal-idle
description: |
A thermal-idle node describes the idle cooling device properties to
cool down efficiently the attached thermal zone.
'#cooling-cells':
const: 2
description: |
Must be 2, in order to specify minimum and maximum cooling state used in
the cooling-maps reference. The first cell is the minimum cooling state
and the second cell is the maximum cooling state requested.
duration-us:
description: |
The idle duration in microsecond the device should cool down.
exit-latency-us:
description: |
The exit latency constraint in microsecond for the injected
idle state for the device. It is the latency constraint to
apply when selecting an idle state from among all the present
ones.
required:
- '#cooling-cells'
examples:
- |
#include <dt-bindings/thermal/thermal.h>
// Example: Combining idle cooling device on big CPUs with cpufreq cooling device
cpus {
#address-cells = <2>;
#size-cells = <0>;
/* ... */
cpu_b0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <436>;
#cooling-cells = <2>; /* min followed by max */
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
thermal-idle {
#cooling-cells = <2>;
duration-us = <10000>;
exit-latency-us = <500>;
};
};
cpu_b1: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0 0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <436>;
#cooling-cells = <2>; /* min followed by max */
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
thermal-idle {
#cooling-cells = <2>;
duration-us = <10000>;
exit-latency-us = <500>;
};
};
/* ... */
};
/* ... */
thermal_zones {
cpu_thermal: cpu {
polling-delay-passive = <100>;
polling-delay = <1000>;
/* ... */
trips {
cpu_alert0: cpu_alert0 {
temperature = <65000>;
hysteresis = <2000>;
type = "passive";
};
cpu_alert1: cpu_alert1 {
temperature = <70000>;
hysteresis = <2000>;
type = "passive";
};
cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert1>;
cooling-device = <&{/cpus/cpu@100/thermal-idle} 0 15 >,
<&{/cpus/cpu@101/thermal-idle} 0 15>;
};
map1 {
trip = <&cpu_alert2>;
cooling-device =
<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
# SPDX-License-Identifier: (GPL-2.0)
# Copyright 2020 Linaro Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Thermal sensor binding
maintainers:
- Amit Kucheria <amitk@kernel.org>
description: |
Thermal management is achieved in devicetree by describing the sensor hardware
and the software abstraction of thermal zones required to take appropriate
action to mitigate thermal overloads.
The following node types are used to completely describe a thermal management
system in devicetree:
- thermal-sensor: device that measures temperature, has SoC-specific bindings
- cooling-device: device used to dissipate heat either passively or actively
- thermal-zones: a container of the following node types used to describe all
thermal data for the platform
This binding describes the thermal-sensor.
Thermal sensor devices provide temperature sensing capabilities on thermal
zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor
devices may control one or more internal sensors.
properties:
"#thermal-sensor-cells":
description:
Used to uniquely identify a thermal sensor instance within an IC. Will be
0 on sensor nodes with only a single sensor and at least 1 on nodes
containing several internal sensors.
enum: [0, 1]
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 1: SDM845 TSENS
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
/* ... */
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <13>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <8>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0)
# Copyright 2020 Linaro Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
$schema: http://devicetree.org/meta-schemas/base.yaml#
title: Thermal zone binding
maintainers:
- Amit Kucheria <amitk@kernel.org>
description: |
Thermal management is achieved in devicetree by describing the sensor hardware
and the software abstraction of cooling devices and thermal zones required to
take appropriate action to mitigate thermal overloads.
The following node types are used to completely describe a thermal management
system in devicetree:
- thermal-sensor: device that measures temperature, has SoC-specific bindings
- cooling-device: device used to dissipate heat either passively or actively
- thermal-zones: a container of the following node types used to describe all
thermal data for the platform
This binding describes the thermal-zones.
The polling-delay properties of a thermal-zone are bound to the maximum dT/dt
(temperature derivative over time) in two situations for a thermal zone:
1. when passive cooling is activated (polling-delay-passive)
2. when the zone just needs to be monitored (polling-delay) or when
active cooling is activated.
The maximum dT/dt is highly bound to hardware power consumption and
dissipation capability. The delays should be chosen to account for said
max dT/dt, such that a device does not cross several trip boundaries
unexpectedly between polls. Choosing the right polling delays shall avoid
having the device in temperature ranges that may damage the silicon structures
and reduce silicon lifetime.
properties:
$nodename:
const: thermal-zones
description:
A /thermal-zones node is required in order to use the thermal framework to
manage input from the various thermal zones in the system in order to
mitigate thermal overload conditions. It does not represent a real device
in the system, but acts as a container to link a thermal sensor device,
platform-data regarding temperature thresholds and the mitigation actions
to take when the temperature crosses those thresholds.
patternProperties:
"^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
type: object
description:
Each thermal zone node contains information about how frequently it
must be checked, the sensor responsible for reporting temperature for
this zone, one sub-node containing the various trip points for this
zone and one sub-node containing all the zone cooling-maps.
properties:
polling-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The maximum number of milliseconds to wait between polls when
checking this thermal zone. Setting this to 0 disables the polling
timers setup by the thermal framework and assumes that the thermal
sensors in this zone support interrupts.
polling-delay-passive:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The maximum number of milliseconds to wait between polls when
checking this thermal zone while doing passive cooling. Setting
this to 0 disables the polling timers setup by the thermal
framework and assumes that the thermal sensors in this zone
support interrupts.
thermal-sensors:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
description:
The thermal sensor phandle and sensor specifier used to monitor this
thermal zone.
coefficients:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
An array of integers containing the coefficients of a linear equation
that binds all the sensors listed in this thermal zone.
The linear equation used is as follows,
z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn
where c0, c1, .., cn are the coefficients.
Coefficients default to 1 in case this property is not specified. The
coefficients are ordered and are matched with sensors by means of the
sensor ID. Additional coefficients are interpreted as constant offset.
sustainable-power:
$ref: /schemas/types.yaml#/definitions/uint32
description:
An estimate of the sustainable power (in mW) that this thermal zone
can dissipate at the desired control temperature. For reference, the
sustainable power of a 4-inch phone is typically 2000mW, while on a
10-inch tablet is around 4500mW.
trips:
type: object
description:
This node describes a set of points in the temperature domain at
which the thermal framework needs to take action. The actions to
be taken are defined in another node called cooling-maps.
patternProperties:
"^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$":
type: object
properties:
temperature:
$ref: /schemas/types.yaml#/definitions/int32
minimum: -273000
maximum: 200000
description:
An integer expressing the trip temperature in millicelsius.
hysteresis:
$ref: /schemas/types.yaml#/definitions/uint32
description:
An unsigned integer expressing the hysteresis delta with
respect to the trip temperature property above, also in
millicelsius. Any cooling action initiated by the framework is
maintained until the temperature falls below
(trip temperature - hysteresis). This potentially prevents a
situation where the trip gets constantly triggered soon after
cooling action is removed.
type:
$ref: /schemas/types.yaml#/definitions/string
enum:
- active # enable active cooling e.g. fans
- passive # enable passive cooling e.g. throttling cpu
- hot # send notification to driver
- critical # send notification to driver, trigger shutdown
description: |
There are four valid trip types: active, passive, hot,
critical.
The critical trip type is used to set the maximum
temperature threshold above which the HW becomes
unstable and underlying firmware might even trigger a
reboot. Hitting the critical threshold triggers a system
shutdown.
The hot trip type can be used to send a notification to
the thermal driver (if a .notify callback is registered).
The action to be taken is left to the driver.
The passive trip type can be used to slow down HW e.g. run
the CPU, GPU, bus at a lower frequency.
The active trip type can be used to control other HW to
help in cooling e.g. fans can be sped up or slowed down
required:
- temperature
- hysteresis
- type
additionalProperties: false
additionalProperties: false
cooling-maps:
type: object
description:
This node describes the action to be taken when a thermal zone
crosses one of the temperature thresholds described in the trips
node. The action takes the form of a mapping relation between a
trip and the target cooling device state.
patternProperties:
"^map[-a-zA-Z0-9]*$":
type: object
properties:
trip:
$ref: /schemas/types.yaml#/definitions/phandle
description:
A phandle of a trip point node within this thermal zone.
cooling-device:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
A list of cooling device phandles along with the minimum
and maximum cooling state specifiers for each cooling
device. Using the THERMAL_NO_LIMIT (-1UL) constant in the
cooling-device phandle limit specifier lets the framework
use the minimum and maximum cooling state for that cooling
device automatically.
contribution:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 100
description:
The percentage contribution of the cooling devices at the
specific trip temperature referenced in this map
to this thermal zone
required:
- trip
- cooling-device
additionalProperties: false
required:
- polling-delay
- polling-delay-passive
- thermal-sensors
- trips
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
// Example 1: SDM845 TSENS
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
/* ... */
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <13>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <8>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
};
/* ... */
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert0>;
/* Corresponds to 1400MHz in OPP table */
cooling-device = <&CPU0 3 3>, <&CPU1 3 3>,
<&CPU2 3 3>, <&CPU3 3 3>;
};
map1 {
trip = <&cpu0_alert1>;
/* Corresponds to 1000MHz in OPP table */
cooling-device = <&CPU0 5 5>, <&CPU1 5 5>,
<&CPU2 5 5>, <&CPU3 5 5>;
};
};
};
/* ... */
cluster0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
cluster0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cluster0_crit: cluster0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
/* ... */
gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
trips {
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments AM654 VTM (DTS) binding
maintainers:
- Keerthy <j-keerthy@ti.com>
properties:
compatible:
const: ti,am654-vtm
reg:
maxItems: 1
power-domains:
maxItems: 1
"#thermal-sensor-cells":
const: 1
required:
- compatible
- reg
- power-domains
- "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/soc/ti,sci_pm_domain.h>
vtm: thermal@42050000 {
compatible = "ti,am654-vtm";
reg = <0x0 0x42050000 0x0 0x25c>;
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
#thermal-sensor-cells = <1>;
};
mpu0_thermal: mpu0_thermal {
polling-delay-passive = <250>; /* milliseconds */
polling-delay = <500>; /* milliseconds */
thermal-sensors = <&vtm0 0>;
trips {
mpu0_crit: mpu0_crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
};
...
......@@ -14556,6 +14556,15 @@ F: Documentation/devicetree/bindings/i2c/renesas,iic.txt
F: drivers/i2c/busses/i2c-rcar.c
F: drivers/i2c/busses/i2c-sh_mobile.c
RENESAS R-CAR THERMAL DRIVERS
M: Niklas Söderlund <niklas.soderlund@ragnatech.se>
L: linux-renesas-soc@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
F: Documentation/devicetree/bindings/thermal/rcar-thermal.txt
F: drivers/thermal/rcar_gen3_thermal.c
F: drivers/thermal/rcar_thermal.c
RENESAS RIIC DRIVER
M: Chris Brandt <chris.brandt@renesas.com>
S: Supported
......
......@@ -8,6 +8,7 @@
#define pr_fmt(fmt) "CPUidle arm: " fmt
#include <linux/cpu_cooling.h>
#include <linux/cpuidle.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
......@@ -124,6 +125,8 @@ static int __init arm_idle_init_cpu(int cpu)
if (ret)
goto out_kfree_drv;
cpuidle_cooling_register(drv);
return 0;
out_kfree_drv:
......
......@@ -9,6 +9,7 @@
#define pr_fmt(fmt) "CPUidle PSCI: " fmt
#include <linux/cpuhotplug.h>
#include <linux/cpu_cooling.h>
#include <linux/cpuidle.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
......@@ -319,6 +320,8 @@ static int __init psci_idle_init_cpu(int cpu)
if (ret)
goto out_kfree_drv;
cpuidle_cooling_register(drv);
return 0;
out_kfree_drv:
......
......@@ -61,12 +61,14 @@ struct idle_inject_thread {
* @timer: idle injection period timer
* @idle_duration_us: duration of CPU idle time to inject
* @run_duration_us: duration of CPU run time to allow
* @latency_us: max allowed latency
* @cpumask: mask of CPUs affected by idle injection
*/
struct idle_inject_device {
struct hrtimer timer;
unsigned int idle_duration_us;
unsigned int run_duration_us;
unsigned int latency_us;
unsigned long cpumask[];
};
......@@ -138,7 +140,8 @@ static void idle_inject_fn(unsigned int cpu)
*/
iit->should_run = 0;
play_idle(READ_ONCE(ii_dev->idle_duration_us));
play_idle_precise(READ_ONCE(ii_dev->idle_duration_us) * NSEC_PER_USEC,
READ_ONCE(ii_dev->latency_us) * NSEC_PER_USEC);
}
/**
......@@ -169,6 +172,16 @@ void idle_inject_get_duration(struct idle_inject_device *ii_dev,
*idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
}
/**
* idle_inject_set_latency - set the maximum latency allowed
* @latency_us: set the latency requirement for the idle state
*/
void idle_inject_set_latency(struct idle_inject_device *ii_dev,
unsigned int latency_us)
{
WRITE_ONCE(ii_dev->latency_us, latency_us);
}
/**
* idle_inject_start - start idle injections
* @ii_dev: idle injection control device structure
......@@ -297,6 +310,7 @@ struct idle_inject_device *idle_inject_register(struct cpumask *cpumask)
cpumask_copy(to_cpumask(ii_dev->cpumask), cpumask);
hrtimer_init(&ii_dev->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
ii_dev->timer.function = idle_inject_timer_fn;
ii_dev->latency_us = UINT_MAX;
for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) {
......
......@@ -273,6 +273,16 @@ config IMX8MM_THERMAL
cpufreq is used as the cooling device to throttle CPUs when the passive
trip is crossed.
config K3_THERMAL
tristate "Texas Instruments K3 thermal support"
depends on ARCH_K3 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
K3 SoC family. The current chip supported is:
- AM654
This includes temperature reading functionality.
config MAX77620_THERMAL
tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
depends on MFD_MAX77620
......@@ -285,8 +295,8 @@ config MAX77620_THERMAL
config QORIQ_THERMAL
tristate "QorIQ Thermal Monitoring Unit"
depends on THERMAL_OF
depends on HAS_IOMEM
depends on THERMAL_OF && HAS_IOMEM
depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || (ARCH_MXC && ARM64) || COMPILE_TEST
select REGMAP_MMIO
help
Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms.
......
......@@ -9,14 +9,14 @@ thermal_sys-y += thermal_core.o thermal_sysfs.o \
# interface to/from other layers providing sensors
thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o
thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o
thermal_sys-$(CONFIG_THERMAL_OF) += thermal_of.o
# governors
thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o
thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += gov_fair_share.o
thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o
thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o
thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o
thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += power_allocator.o
thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += gov_step_wise.o
thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += gov_user_space.o
thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += gov_power_allocator.o
# cpufreq cooling
thermal_sys-$(CONFIG_CPU_FREQ_THERMAL) += cpufreq_cooling.o
......@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o
# devfreq cooling
thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o
# platform thermal drivers
obj-y += broadcom/
obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
......
......@@ -12,15 +12,16 @@
* Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
*/
#include <linux/clk.h>
#include <linux/clock_cooling.h>
#include <linux/cpufreq.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/idr.h>
#include <linux/mutex.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#include <linux/clock_cooling.h>
/**
* struct clock_cooling_device - data for cooling device with clock
......
......@@ -10,17 +10,17 @@
* Viresh Kumar <viresh.kumar@linaro.org>
*
*/
#include <linux/module.h>
#include <linux/thermal.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/energy_model.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/idr.h>
#include <linux/pm_opp.h>
#include <linux/pm_qos.h>
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
#include <linux/energy_model.h>
#include <linux/thermal.h>
#include <trace/events/thermal.h>
......
......@@ -5,11 +5,14 @@
* Author: Daniel Lezcano <daniel.lezcano@linaro.org>
*
*/
#define pr_fmt(fmt) "cpuidle cooling: " fmt
#include <linux/cpu_cooling.h>
#include <linux/cpuidle.h>
#include <linux/err.h>
#include <linux/idle_inject.h>
#include <linux/idr.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/thermal.h>
......@@ -154,22 +157,25 @@ static struct thermal_cooling_device_ops cpuidle_cooling_ops = {
};
/**
* cpuidle_of_cooling_register - Idle cooling device initialization function
* __cpuidle_cooling_register: register the cooling device
* @drv: a cpuidle driver structure pointer
* @np: a node pointer to a device tree cooling device node
* @np: a device node structure pointer used for the thermal binding
*
* This function is in charge of creating a cooling device per cpuidle
* driver and register it to thermal framework.
* This function is in charge of allocating the cpuidle cooling device
* structure, the idle injection, initialize them and register the
* cooling device to the thermal framework.
*
* Return: zero on success, or negative value corresponding to the
* error detected in the underlying subsystems.
* Return: zero on success, a negative value returned by one of the
* underlying subsystem in case of error
*/
int cpuidle_of_cooling_register(struct device_node *np,
struct cpuidle_driver *drv)
static int __cpuidle_cooling_register(struct device_node *np,
struct cpuidle_driver *drv)
{
struct idle_inject_device *ii_dev;
struct cpuidle_cooling_device *idle_cdev;
struct thermal_cooling_device *cdev;
unsigned int idle_duration_us = TICK_USEC;
unsigned int latency_us = UINT_MAX;
char dev_name[THERMAL_NAME_LENGTH];
int id, ret;
......@@ -191,7 +197,11 @@ int cpuidle_of_cooling_register(struct device_node *np,
goto out_id;
}
idle_inject_set_duration(ii_dev, TICK_USEC, TICK_USEC);
of_property_read_u32(np, "duration-us", &idle_duration_us);
of_property_read_u32(np, "exit-latency-us", &latency_us);
idle_inject_set_duration(ii_dev, TICK_USEC, idle_duration_us);
idle_inject_set_latency(ii_dev, latency_us);
idle_cdev->ii_dev = ii_dev;
......@@ -204,6 +214,9 @@ int cpuidle_of_cooling_register(struct device_node *np,
goto out_unregister;
}
pr_debug("%s: Idle injection set with idle duration=%u, latency=%u\n",
dev_name, idle_duration_us, latency_us);
return 0;
out_unregister:
......@@ -221,12 +234,38 @@ int cpuidle_of_cooling_register(struct device_node *np,
* @drv: a cpuidle driver structure pointer
*
* This function is in charge of creating a cooling device per cpuidle
* driver and register it to thermal framework.
* driver and register it to the thermal framework.
*
* Return: zero on success, or negative value corresponding to the
* error detected in the underlying subsystems.
*/
int cpuidle_cooling_register(struct cpuidle_driver *drv)
void cpuidle_cooling_register(struct cpuidle_driver *drv)
{
return cpuidle_of_cooling_register(NULL, drv);
struct device_node *cooling_node;
struct device_node *cpu_node;
int cpu, ret;
for_each_cpu(cpu, drv->cpumask) {
cpu_node = of_cpu_device_node_get(cpu);
cooling_node = of_get_child_by_name(cpu_node, "thermal-idle");
of_node_put(cpu_node);
if (!cooling_node) {
pr_debug("'thermal-idle' node not found for cpu%d\n", cpu);
continue;
}
ret = __cpuidle_cooling_register(cooling_node, drv);
of_node_put(cooling_node);
if (ret) {
pr_err("Failed to register the cpuidle cooling device" \
"for cpu%d: %d\n", cpu, ret);
break;
}
}
}
......@@ -24,11 +24,13 @@
#include <linux/idr.h>
#include <linux/slab.h>
#include <linux/pm_opp.h>
#include <linux/pm_qos.h>
#include <linux/thermal.h>
#include <trace/events/thermal.h>
#define SCALE_ERROR_MITIGATION 100
#define HZ_PER_KHZ 1000
#define SCALE_ERROR_MITIGATION 100
static DEFINE_IDA(devfreq_ida);
......@@ -54,6 +56,8 @@ static DEFINE_IDA(devfreq_ida);
* The 'res_util' range is from 100 to (power_table[state] * 100)
* for the corresponding 'state'.
* @capped_state: index to cooling state with in dynamic power budget
* @req_max_freq: PM QoS request for limiting the maximum frequency
* of the devfreq device.
*/
struct devfreq_cooling_device {
int id;
......@@ -66,49 +70,9 @@ struct devfreq_cooling_device {
struct devfreq_cooling_power *power_ops;
u32 res_util;
int capped_state;
struct dev_pm_qos_request req_max_freq;
};
/**
* partition_enable_opps() - disable all opps above a given state
* @dfc: Pointer to devfreq we are operating on
* @cdev_state: cooling device state we're setting
*
* Go through the OPPs of the device, enabling all OPPs until
* @cdev_state and disabling those frequencies above it.
*/
static int partition_enable_opps(struct devfreq_cooling_device *dfc,
unsigned long cdev_state)
{
int i;
struct device *dev = dfc->devfreq->dev.parent;
for (i = 0; i < dfc->freq_table_size; i++) {
struct dev_pm_opp *opp;
int ret = 0;
unsigned int freq = dfc->freq_table[i];
bool want_enable = i >= cdev_state ? true : false;
opp = dev_pm_opp_find_freq_exact(dev, freq, !want_enable);
if (PTR_ERR(opp) == -ERANGE)
continue;
else if (IS_ERR(opp))
return PTR_ERR(opp);
dev_pm_opp_put(opp);
if (want_enable)
ret = dev_pm_opp_enable(dev, freq);
else
ret = dev_pm_opp_disable(dev, freq);
if (ret)
return ret;
}
return 0;
}
static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
......@@ -135,7 +99,7 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
struct devfreq_cooling_device *dfc = cdev->devdata;
struct devfreq *df = dfc->devfreq;
struct device *dev = df->dev.parent;
int ret;
unsigned long freq;
if (state == dfc->cooling_state)
return 0;
......@@ -145,9 +109,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
if (state >= dfc->freq_table_size)
return -EINVAL;
ret = partition_enable_opps(dfc, state);
if (ret)
return ret;
freq = dfc->freq_table[state];
dev_pm_qos_update_request(&dfc->req_max_freq,
DIV_ROUND_UP(freq, HZ_PER_KHZ));
dfc->cooling_state = state;
......@@ -530,9 +495,15 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
if (err)
goto free_dfc;
err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq,
DEV_PM_QOS_MAX_FREQUENCY,
PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
if (err < 0)
goto free_tables;
err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
if (err < 0)
goto remove_qos_req;
dfc->id = err;
snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d", dfc->id);
......@@ -553,6 +524,10 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
release_ida:
ida_simple_remove(&devfreq_ida, dfc->id);
remove_qos_req:
dev_pm_qos_remove_request(&dfc->req_max_freq);
free_tables:
kfree(dfc->power_table);
kfree(dfc->freq_table);
......@@ -601,6 +576,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
thermal_cooling_device_unregister(dfc->cdev);
ida_simple_remove(&devfreq_ida, dfc->id);
dev_pm_qos_remove_request(&dfc->req_max_freq);
kfree(dfc->power_table);
kfree(dfc->freq_table);
......
......@@ -10,8 +10,8 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/thermal.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#include "thermal_core.h"
......
......@@ -54,7 +54,7 @@ struct imx8mm_tmu {
void __iomem *base;
struct clk *clk;
const struct thermal_soc_data *socdata;
struct tmu_sensor sensors[0];
struct tmu_sensor sensors[];
};
static int imx8mm_tmu_get_temp(void *data, int *temp)
......
......@@ -14,6 +14,7 @@
#include <linux/thermal.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
#define IMX_SC_MISC_FUNC_GET_TEMP 13
......@@ -115,6 +116,9 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
ret = PTR_ERR(sensor->tzd);
break;
}
if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
}
of_node_put(sensor_np);
......
......@@ -13,6 +13,7 @@
#include "acpi_thermal_rel.h"
#define INT3400_THERMAL_TABLE_CHANGED 0x83
#define INT3400_ODVP_CHANGED 0x88
enum int3400_thermal_uuid {
INT3400_THERMAL_PASSIVE_1,
......@@ -41,8 +42,11 @@ static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {
"BE84BABF-C4D4-403D-B495-3128FD44dAC1",
};
struct odvp_attr;
struct int3400_thermal_priv {
struct acpi_device *adev;
struct platform_device *pdev;
struct thermal_zone_device *thermal;
int mode;
int art_count;
......@@ -52,6 +56,36 @@ struct int3400_thermal_priv {
u8 uuid_bitmap;
int rel_misc_dev_res;
int current_uuid_index;
char *data_vault;
int odvp_count;
int *odvp;
struct odvp_attr *odvp_attrs;
};
static int evaluate_odvp(struct int3400_thermal_priv *priv);
struct odvp_attr {
int odvp;
struct int3400_thermal_priv *priv;
struct kobj_attribute attr;
};
static ssize_t data_vault_read(struct file *file, struct kobject *kobj,
struct bin_attribute *attr, char *buf, loff_t off, size_t count)
{
memcpy(buf, attr->private + off, count);
return count;
}
static BIN_ATTR_RO(data_vault, 0);
static struct bin_attribute *data_attributes[] = {
&bin_attr_data_vault,
NULL,
};
static const struct attribute_group data_attribute_group = {
.bin_attrs = data_attributes,
};
static ssize_t available_uuids_show(struct device *dev,
......@@ -62,6 +96,9 @@ static ssize_t available_uuids_show(struct device *dev,
int i;
int length = 0;
if (!priv->uuid_bitmap)
return sprintf(buf, "UNKNOWN\n");
for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; i++) {
if (priv->uuid_bitmap & (1 << i))
if (PAGE_SIZE - length > 0)
......@@ -79,11 +116,11 @@ static ssize_t current_uuid_show(struct device *dev,
{
struct int3400_thermal_priv *priv = dev_get_drvdata(dev);
if (priv->uuid_bitmap & (1 << priv->current_uuid_index))
return sprintf(buf, "%s\n",
int3400_thermal_uuids[priv->current_uuid_index]);
else
if (priv->current_uuid_index == -1)
return sprintf(buf, "INVALID\n");
return sprintf(buf, "%s\n",
int3400_thermal_uuids[priv->current_uuid_index]);
}
static ssize_t current_uuid_store(struct device *dev,
......@@ -94,9 +131,16 @@ static ssize_t current_uuid_store(struct device *dev,
int i;
for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; ++i) {
if ((priv->uuid_bitmap & (1 << i)) &&
!(strncmp(buf, int3400_thermal_uuids[i],
sizeof(int3400_thermal_uuids[i]) - 1))) {
if (!strncmp(buf, int3400_thermal_uuids[i],
sizeof(int3400_thermal_uuids[i]) - 1)) {
/*
* If we have a list of supported UUIDs, make sure
* this one is supported.
*/
if (priv->uuid_bitmap &&
!(priv->uuid_bitmap & (1 << i)))
return -EINVAL;
priv->current_uuid_index = i;
return count;
}
......@@ -191,9 +235,110 @@ static int int3400_thermal_run_osc(acpi_handle handle,
result = -EPERM;
kfree(context.ret.pointer);
return result;
}
static ssize_t odvp_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
struct odvp_attr *odvp_attr;
odvp_attr = container_of(attr, struct odvp_attr, attr);
return sprintf(buf, "%d\n", odvp_attr->priv->odvp[odvp_attr->odvp]);
}
static void cleanup_odvp(struct int3400_thermal_priv *priv)
{
int i;
if (priv->odvp_attrs) {
for (i = 0; i < priv->odvp_count; i++) {
sysfs_remove_file(&priv->pdev->dev.kobj,
&priv->odvp_attrs[i].attr.attr);
kfree(priv->odvp_attrs[i].attr.attr.name);
}
kfree(priv->odvp_attrs);
}
kfree(priv->odvp);
priv->odvp_count = 0;
}
static int evaluate_odvp(struct int3400_thermal_priv *priv)
{
struct acpi_buffer odvp = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj = NULL;
acpi_status status;
int i, ret;
status = acpi_evaluate_object(priv->adev->handle, "ODVP", NULL, &odvp);
if (ACPI_FAILURE(status)) {
ret = -EINVAL;
goto out_err;
}
obj = odvp.pointer;
if (obj->type != ACPI_TYPE_PACKAGE) {
ret = -EINVAL;
goto out_err;
}
if (priv->odvp == NULL) {
priv->odvp_count = obj->package.count;
priv->odvp = kmalloc_array(priv->odvp_count, sizeof(int),
GFP_KERNEL);
if (!priv->odvp) {
ret = -ENOMEM;
goto out_err;
}
}
if (priv->odvp_attrs == NULL) {
priv->odvp_attrs = kcalloc(priv->odvp_count,
sizeof(struct odvp_attr),
GFP_KERNEL);
if (!priv->odvp_attrs) {
ret = -ENOMEM;
goto out_err;
}
for (i = 0; i < priv->odvp_count; i++) {
struct odvp_attr *odvp = &priv->odvp_attrs[i];
sysfs_attr_init(&odvp->attr.attr);
odvp->priv = priv;
odvp->odvp = i;
odvp->attr.attr.name = kasprintf(GFP_KERNEL,
"odvp%d", i);
if (!odvp->attr.attr.name) {
ret = -ENOMEM;
goto out_err;
}
odvp->attr.attr.mode = 0444;
odvp->attr.show = odvp_show;
odvp->attr.store = NULL;
ret = sysfs_create_file(&priv->pdev->dev.kobj,
&odvp->attr.attr);
if (ret)
goto out_err;
}
}
for (i = 0; i < obj->package.count; i++) {
if (obj->package.elements[i].type == ACPI_TYPE_INTEGER)
priv->odvp[i] = obj->package.elements[i].integer.value;
}
kfree(obj);
return 0;
out_err:
cleanup_odvp(priv);
kfree(obj);
return ret;
}
static void int3400_notify(acpi_handle handle,
u32 event,
void *data)
......@@ -217,6 +362,9 @@ static void int3400_notify(acpi_handle handle,
kobject_uevent_env(&priv->thermal->device.kobj, KOBJ_CHANGE,
thermal_prop);
break;
case INT3400_ODVP_CHANGED:
evaluate_odvp(priv);
break;
default:
/* Ignore unknown notification codes sent to INT3400 device */
break;
......@@ -266,11 +414,16 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
priv->current_uuid_index,
enable);
}
evaluate_odvp(priv);
return result;
}
static struct thermal_zone_device_ops int3400_thermal_ops = {
.get_temp = int3400_thermal_get_temp,
.get_mode = int3400_thermal_get_mode,
.set_mode = int3400_thermal_set_mode,
};
static struct thermal_zone_params int3400_thermal_params = {
......@@ -278,6 +431,32 @@ static struct thermal_zone_params int3400_thermal_params = {
.no_hwmon = true,
};
static void int3400_setup_gddv(struct int3400_thermal_priv *priv)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
acpi_status status;
status = acpi_evaluate_object(priv->adev->handle, "GDDV", NULL,
&buffer);
if (ACPI_FAILURE(status) || !buffer.length)
return;
obj = buffer.pointer;
if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 1
|| obj->package.elements[0].type != ACPI_TYPE_BUFFER) {
kfree(buffer.pointer);
return;
}
priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer,
obj->package.elements[0].buffer.length,
GFP_KERNEL);
bin_attr_data_vault.private = priv->data_vault;
bin_attr_data_vault.size = obj->package.elements[0].buffer.length;
kfree(buffer.pointer);
}
static int int3400_thermal_probe(struct platform_device *pdev)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
......@@ -291,12 +470,17 @@ static int int3400_thermal_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
priv->pdev = pdev;
priv->adev = adev;
result = int3400_thermal_get_uuids(priv);
if (result)
/* Missing IDSP isn't fatal */
if (result && result != -ENODEV)
goto free_priv;
priv->current_uuid_index = -1;
result = acpi_parse_art(priv->adev->handle, &priv->art_count,
&priv->arts, true);
if (result)
......@@ -309,8 +493,9 @@ static int int3400_thermal_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
int3400_thermal_ops.get_mode = int3400_thermal_get_mode;
int3400_thermal_ops.set_mode = int3400_thermal_set_mode;
int3400_setup_gddv(priv);
evaluate_odvp(priv);
priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0,
priv, &int3400_thermal_ops,
......@@ -327,6 +512,13 @@ static int int3400_thermal_probe(struct platform_device *pdev)
if (result)
goto free_rel_misc;
if (priv->data_vault) {
result = sysfs_create_group(&pdev->dev.kobj,
&data_attribute_group);
if (result)
goto free_uuid;
}
result = acpi_install_notify_handler(
priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify,
(void *)priv);
......@@ -336,6 +528,12 @@ static int int3400_thermal_probe(struct platform_device *pdev)
return 0;
free_sysfs:
cleanup_odvp(priv);
if (priv->data_vault) {
sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group);
kfree(priv->data_vault);
}
free_uuid:
sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
free_rel_misc:
if (!priv->rel_misc_dev_res)
......@@ -357,11 +555,16 @@ static int int3400_thermal_remove(struct platform_device *pdev)
priv->adev->handle, ACPI_DEVICE_NOTIFY,
int3400_notify);
cleanup_odvp(priv);
if (!priv->rel_misc_dev_res)
acpi_thermal_rel_misc_device_remove(priv->adev->handle);
if (priv->data_vault)
sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group);
sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
thermal_zone_device_unregister(priv->thermal);
kfree(priv->data_vault);
kfree(priv->trts);
kfree(priv->arts);
kfree(priv);
......
// SPDX-License-Identifier: GPL-2.0
/*
* TI Bandgap temperature sensor driver for K3 SoC Family
*
* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
#include <linux/thermal.h>
#include <linux/types.h>
#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4
#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0
#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80
#define K3_VTM_REGS_PER_TS 0x10
#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff
#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0)
#define K3_VTM_TMPSENS_CTRL_SOC BIT(5)
#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6)
#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7)
#define K3_VTM_ADC_BEGIN_VAL 540
#define K3_VTM_ADC_END_VAL 944
static const int k3_adc_to_temp[] = {
-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
-37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
-33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
-30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
-26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
-22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
-18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
-15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
-11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
-7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
-2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
123400, 123800, 124200, 124600, 124900, 125000,
};
struct k3_bandgap {
void __iomem *base;
const struct k3_bandgap_data *conf;
};
/* common data structures */
struct k3_thermal_data {
struct thermal_zone_device *tzd;
struct k3_bandgap *bgp;
int sensor_id;
u32 ctrl_offset;
u32 stat_offset;
};
static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
unsigned int s2)
{
int d01 = abs(s0 - s1);
int d02 = abs(s0 - s2);
int d12 = abs(s1 - s2);
if (d01 <= d02 && d01 <= d12)
return (s0 + s1) / 2;
if (d02 <= d01 && d02 <= d12)
return (s0 + s2) / 2;
return (s1 + s2) / 2;
}
static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
int *temp)
{
struct k3_bandgap *bgp;
unsigned int dtemp, s0, s1, s2;
bgp = devdata->bgp;
/*
* Errata is applicable for am654 pg 1.0 silicon. There
* is a variation of the order for 8-10 degree centigrade.
* Work around that by getting the average of two closest
* readings out of three readings everytime we want to
* report temperatures.
*
* Errata workaround.
*/
s0 = readl(bgp->base + devdata->stat_offset) &
K3_VTM_TS_STAT_DTEMP_MASK;
s1 = readl(bgp->base + devdata->stat_offset) &
K3_VTM_TS_STAT_DTEMP_MASK;
s2 = readl(bgp->base + devdata->stat_offset) &
K3_VTM_TS_STAT_DTEMP_MASK;
dtemp = vtm_get_best_value(s0, s1, s2);
if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
return -EINVAL;
*temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
return 0;
}
static int k3_thermal_get_temp(void *devdata, int *temp)
{
struct k3_thermal_data *data = devdata;
int ret = 0;
ret = k3_bgp_read_temp(data, temp);
if (ret)
return ret;
return ret;
}
static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
.get_temp = k3_thermal_get_temp,
};
static const struct of_device_id of_k3_bandgap_match[];
static int k3_bandgap_probe(struct platform_device *pdev)
{
int ret = 0, cnt, val, id;
struct resource *res;
struct device *dev = &pdev->dev;
struct k3_bandgap *bgp;
struct k3_thermal_data *data;
if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
K3_VTM_ADC_BEGIN_VAL))
return -EINVAL;
bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
if (!bgp)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bgp->base = devm_ioremap_resource(dev, res);
if (IS_ERR(bgp->base))
return PTR_ERR(bgp->base);
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
return ret;
}
/* Get the sensor count in the VTM */
val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto err_alloc;
}
/* Register the thermal sensors */
for (id = 0; id < cnt; id++) {
data[id].sensor_id = id;
data[id].bgp = bgp;
data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
id * K3_VTM_REGS_PER_TS;
data[id].stat_offset = data[id].ctrl_offset + 0x8;
val = readl(data[id].bgp->base + data[id].ctrl_offset);
val |= (K3_VTM_TMPSENS_CTRL_SOC |
K3_VTM_TMPSENS_CTRL_CLRZ |
K3_VTM_TMPSENS_CTRL_CLKON_REQ);
val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
writel(val, data[id].bgp->base + data[id].ctrl_offset);
data[id].tzd =
devm_thermal_zone_of_sensor_register(dev, id,
&data[id],
&k3_of_thermal_ops);
if (IS_ERR(data[id].tzd)) {
dev_err(dev, "thermal zone device is NULL\n");
ret = PTR_ERR(data[id].tzd);
goto err_alloc;
}
}
platform_set_drvdata(pdev, bgp);
return 0;
err_alloc:
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
return ret;
}
static int k3_bandgap_remove(struct platform_device *pdev)
{
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
static const struct of_device_id of_k3_bandgap_match[] = {
{
.compatible = "ti,am654-vtm",
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
static struct platform_driver k3_bandgap_sensor_driver = {
.probe = k3_bandgap_probe,
.remove = k3_bandgap_remove,
.driver = {
.name = "k3-soc-thermal",
.of_match_table = of_k3_bandgap_match,
},
};
module_platform_driver(k3_bandgap_sensor_driver);
MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \
tsens-8960.o tsens-v2.o tsens-v1.o
qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
tsens-8960.o
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "tsens.h"
/**
* struct tsens_irq_data - IRQ status and temperature violations
* @up_viol: upper threshold violated
* @up_thresh: upper threshold temperature value
* @up_irq_mask: mask register for upper threshold irqs
* @up_irq_clear: clear register for uppper threshold irqs
* @low_viol: lower threshold violated
* @low_thresh: lower threshold temperature value
* @low_irq_mask: mask register for lower threshold irqs
* @low_irq_clear: clear register for lower threshold irqs
* @crit_viol: critical threshold violated
* @crit_thresh: critical threshold temperature value
* @crit_irq_mask: mask register for critical threshold irqs
* @crit_irq_clear: clear register for critical threshold irqs
*
* Structure containing data about temperature threshold settings and
* irq status if they were violated.
*/
struct tsens_irq_data {
u32 up_viol;
int up_thresh;
u32 up_irq_mask;
u32 up_irq_clear;
u32 low_viol;
int low_thresh;
u32 low_irq_mask;
u32 low_irq_clear;
u32 crit_viol;
u32 crit_thresh;
u32 crit_irq_mask;
u32 crit_irq_clear;
};
char *qfprom_read(struct device *dev, const char *cname)
{
struct nvmem_cell *cell;
ssize_t data;
char *ret;
cell = nvmem_cell_get(dev, cname);
if (IS_ERR(cell))
return ERR_CAST(cell);
ret = nvmem_cell_read(cell, &data);
nvmem_cell_put(cell);
return ret;
}
/*
* Use this function on devices where slope and offset calculations
* depend on calibration data read from qfprom. On others the slope
* and offset values are derived from tz->tzp->slope and tz->tzp->offset
* resp.
*/
void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
u32 *p2, u32 mode)
{
int i;
int num, den;
for (i = 0; i < priv->num_sensors; i++) {
dev_dbg(priv->dev,
"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
__func__, i, p1[i], p2[i]);
priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
/*
* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
* temp_120_degc - temp_30_degc (x2 - x1)
*/
num = p2[i] - p1[i];
num *= SLOPE_FACTOR;
den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
priv->sensor[i].slope = num / den;
}
priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
(CAL_DEGC_PT1 *
priv->sensor[i].slope);
dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset);
}
}
static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
{
u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR);
pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);
}
static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
{
int degc, num, den;
num = (adc_code * SLOPE_FACTOR) - s->offset;
den = s->slope;
if (num > 0)
degc = num + (den / 2);
else if (num < 0)
degc = num - (den / 2);
else
degc = num;
degc /= den;
return degc;
}
/**
* tsens_hw_to_mC - Return sign-extended temperature in mCelsius.
* @s: Pointer to sensor struct
* @field: Index into regmap_field array pointing to temperature data
*
* This function handles temperature returned in ADC code or deciCelsius
* depending on IP version.
*
* Return: Temperature in milliCelsius on success, a negative errno will
* be returned in error cases
*/
static int tsens_hw_to_mC(const struct tsens_sensor *s, int field)
{
struct tsens_priv *priv = s->priv;
u32 resolution;
u32 temp = 0;
int ret;
resolution = priv->fields[LAST_TEMP_0].msb -
priv->fields[LAST_TEMP_0].lsb;
ret = regmap_field_read(priv->rf[field], &temp);
if (ret)
return ret;
/* Convert temperature from ADC code to milliCelsius */
if (priv->feat->adc)
return code_to_degc(temp, s) * 1000;
/* deciCelsius -> milliCelsius along with sign extension */
return sign_extend32(temp, resolution) * 100;
}
/**
* tsens_mC_to_hw - Convert temperature to hardware register value
* @s: Pointer to sensor struct
* @temp: temperature in milliCelsius to be programmed to hardware
*
* This function outputs the value to be written to hardware in ADC code
* or deciCelsius depending on IP version.
*
* Return: ADC code or temperature in deciCelsius.
*/
static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp)
{
struct tsens_priv *priv = s->priv;
/* milliC to adc code */
if (priv->feat->adc)
return degc_to_code(temp / 1000, s);
/* milliC to deciC */
return temp / 100;
}
static inline enum tsens_ver tsens_version(struct tsens_priv *priv)
{
return priv->feat->ver_major;
}
static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id,
enum tsens_irq_type irq_type, bool enable)
{
u32 index = 0;
switch (irq_type) {
case UPPER:
index = UP_INT_CLEAR_0 + hw_id;
break;
case LOWER:
index = LOW_INT_CLEAR_0 + hw_id;
break;
case CRITICAL:
/* No critical interrupts before v2 */
return;
}
regmap_field_write(priv->rf[index], enable ? 0 : 1);
}
static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id,
enum tsens_irq_type irq_type, bool enable)
{
u32 index_mask = 0, index_clear = 0;
/*
* To enable the interrupt flag for a sensor:
* - clear the mask bit
* To disable the interrupt flag for a sensor:
* - Mask further interrupts for this sensor
* - Write 1 followed by 0 to clear the interrupt
*/
switch (irq_type) {
case UPPER:
index_mask = UP_INT_MASK_0 + hw_id;
index_clear = UP_INT_CLEAR_0 + hw_id;
break;
case LOWER:
index_mask = LOW_INT_MASK_0 + hw_id;
index_clear = LOW_INT_CLEAR_0 + hw_id;
break;
case CRITICAL:
index_mask = CRIT_INT_MASK_0 + hw_id;
index_clear = CRIT_INT_CLEAR_0 + hw_id;
break;
}
if (enable) {
regmap_field_write(priv->rf[index_mask], 0);
} else {
regmap_field_write(priv->rf[index_mask], 1);
regmap_field_write(priv->rf[index_clear], 1);
regmap_field_write(priv->rf[index_clear], 0);
}
}
/**
* tsens_set_interrupt - Set state of an interrupt
* @priv: Pointer to tsens controller private data
* @hw_id: Hardware ID aka. sensor number
* @irq_type: irq_type from enum tsens_irq_type
* @enable: false = disable, true = enable
*
* Call IP-specific function to set state of an interrupt
*
* Return: void
*/
static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id,
enum tsens_irq_type irq_type, bool enable)
{
dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__,
irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW",
enable ? "en" : "dis");
if (tsens_version(priv) > VER_1_X)
tsens_set_interrupt_v2(priv, hw_id, irq_type, enable);
else
tsens_set_interrupt_v1(priv, hw_id, irq_type, enable);
}
/**
* tsens_threshold_violated - Check if a sensor temperature violated a preset threshold
* @priv: Pointer to tsens controller private data
* @hw_id: Hardware ID aka. sensor number
* @d: Pointer to irq state data
*
* Return: 0 if threshold was not violated, 1 if it was violated and negative
* errno in case of errors
*/
static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id,
struct tsens_irq_data *d)
{
int ret;
ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol);
if (ret)
return ret;
if (priv->feat->crit_int) {
ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id],
&d->crit_viol);
if (ret)
return ret;
}
if (d->up_viol || d->low_viol || d->crit_viol)
return 1;
return 0;
}
static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
const struct tsens_sensor *s,
struct tsens_irq_data *d)
{
int ret;
ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear);
if (ret)
return ret;
if (tsens_version(priv) > VER_1_X) {
ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id],
&d->crit_irq_clear);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id],
&d->crit_irq_mask);
if (ret)
return ret;
d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id);
} else {
/* No mask register on older TSENS */
d->up_irq_mask = 0;
d->low_irq_mask = 0;
d->crit_irq_clear = 0;
d->crit_irq_mask = 0;
d->crit_thresh = 0;
}
d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id);
d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id);
dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n",
hw_id, __func__,
(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
d->low_viol, d->up_viol, d->crit_viol,
d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear,
d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask);
dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__,
(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
d->low_thresh, d->up_thresh, d->crit_thresh);
return 0;
}
static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
{
if (ver > VER_1_X)
return mask & (1 << hw_id);
/* v1, v0.1 don't have a irq mask register */
return 0;
}
/**
* tsens_critical_irq_thread() - Threaded handler for critical interrupts
* @irq: irq number
* @data: tsens controller private data
*
* Check FSM watchdog bark status and clear if needed.
* Check all sensors to find ones that violated their critical threshold limits.
* Clear and then re-enable the interrupt.
*
* The level-triggered interrupt might deassert if the temperature returned to
* within the threshold limits by the time the handler got scheduled. We
* consider the irq to have been handled in that case.
*
* Return: IRQ_HANDLED
*/
irqreturn_t tsens_critical_irq_thread(int irq, void *data)
{
struct tsens_priv *priv = data;
struct tsens_irq_data d;
int temp, ret, i;
u32 wdog_status, wdog_count;
if (priv->feat->has_watchdog) {
ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS],
&wdog_status);
if (ret)
return ret;
if (wdog_status) {
/* Clear WDOG interrupt */
regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1);
regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0);
ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT],
&wdog_count);
if (ret)
return ret;
if (wdog_count)
dev_dbg(priv->dev, "%s: watchdog count: %d\n",
__func__, wdog_count);
/* Fall through to handle critical interrupts if any */
}
}
for (i = 0; i < priv->num_sensors; i++) {
const struct tsens_sensor *s = &priv->sensor[i];
u32 hw_id = s->hw_id;
if (IS_ERR(s->tzd))
continue;
if (!tsens_threshold_violated(priv, hw_id, &d))
continue;
ret = get_temp_tsens_valid(s, &temp);
if (ret) {
dev_err(priv->dev, "[%u] %s: error reading sensor\n",
hw_id, __func__);
continue;
}
tsens_read_irq_state(priv, hw_id, s, &d);
if (d.crit_viol &&
!masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) {
/* Mask critical interrupts, unused on Linux */
tsens_set_interrupt(priv, hw_id, CRITICAL, false);
}
}
return IRQ_HANDLED;
}
/**
* tsens_irq_thread - Threaded interrupt handler for uplow interrupts
* @irq: irq number
* @data: tsens controller private data
*
* Check all sensors to find ones that violated their threshold limits. If the
* temperature is still outside the limits, call thermal_zone_device_update() to
* update the thresholds, else re-enable the interrupts.
*
* The level-triggered interrupt might deassert if the temperature returned to
* within the threshold limits by the time the handler got scheduled. We
* consider the irq to have been handled in that case.
*
* Return: IRQ_HANDLED
*/
irqreturn_t tsens_irq_thread(int irq, void *data)
{
struct tsens_priv *priv = data;
struct tsens_irq_data d;
bool enable = true, disable = false;
unsigned long flags;
int temp, ret, i;
for (i = 0; i < priv->num_sensors; i++) {
bool trigger = false;
const struct tsens_sensor *s = &priv->sensor[i];
u32 hw_id = s->hw_id;
if (IS_ERR(s->tzd))
continue;
if (!tsens_threshold_violated(priv, hw_id, &d))
continue;
ret = get_temp_tsens_valid(s, &temp);
if (ret) {
dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__);
continue;
}
spin_lock_irqsave(&priv->ul_lock, flags);
tsens_read_irq_state(priv, hw_id, s, &d);
if (d.up_viol &&
!masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) {
tsens_set_interrupt(priv, hw_id, UPPER, disable);
if (d.up_thresh > temp) {
dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
hw_id, __func__);
tsens_set_interrupt(priv, hw_id, UPPER, enable);
} else {
trigger = true;
/* Keep irq masked */
}
} else if (d.low_viol &&
!masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) {
tsens_set_interrupt(priv, hw_id, LOWER, disable);
if (d.low_thresh < temp) {
dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
hw_id, __func__);
tsens_set_interrupt(priv, hw_id, LOWER, enable);
} else {
trigger = true;
/* Keep irq masked */
}
}
spin_unlock_irqrestore(&priv->ul_lock, flags);
if (trigger) {
dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
hw_id, __func__, temp);
thermal_zone_device_update(s->tzd,
THERMAL_EVENT_UNSPECIFIED);
} else {
dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
hw_id, __func__, temp);
}
}
return IRQ_HANDLED;
}
int tsens_set_trips(void *_sensor, int low, int high)
{
struct tsens_sensor *s = _sensor;
struct tsens_priv *priv = s->priv;
struct device *dev = priv->dev;
struct tsens_irq_data d;
unsigned long flags;
int high_val, low_val, cl_high, cl_low;
u32 hw_id = s->hw_id;
dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
hw_id, __func__, low, high);
cl_high = clamp_val(high, -40000, 120000);
cl_low = clamp_val(low, -40000, 120000);
high_val = tsens_mC_to_hw(s, cl_high);
low_val = tsens_mC_to_hw(s, cl_low);
spin_lock_irqsave(&priv->ul_lock, flags);
tsens_read_irq_state(priv, hw_id, s, &d);
/* Write the new thresholds and clear the status */
regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val);
regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val);
tsens_set_interrupt(priv, hw_id, LOWER, true);
tsens_set_interrupt(priv, hw_id, UPPER, true);
spin_unlock_irqrestore(&priv->ul_lock, flags);
dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
return 0;
}
int tsens_enable_irq(struct tsens_priv *priv)
{
int ret;
int val = tsens_version(priv) > VER_1_X ? 7 : 1;
ret = regmap_field_write(priv->rf[INT_EN], val);
if (ret < 0)
dev_err(priv->dev, "%s: failed to enable interrupts\n", __func__);
return ret;
}
void tsens_disable_irq(struct tsens_priv *priv)
{
regmap_field_write(priv->rf[INT_EN], 0);
}
int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
{
struct tsens_priv *priv = s->priv;
int hw_id = s->hw_id;
u32 temp_idx = LAST_TEMP_0 + hw_id;
u32 valid_idx = VALID_0 + hw_id;
u32 valid;
int ret;
ret = regmap_field_read(priv->rf[valid_idx], &valid);
if (ret)
return ret;
while (!valid) {
/* Valid bit is 0 for 6 AHB clock cycles.
* At 19.2MHz, 1 AHB clock is ~60ns.
* We should enter this loop very, very rarely.
*/
ndelay(400);
ret = regmap_field_read(priv->rf[valid_idx], &valid);
if (ret)
return ret;
}
/* Valid bit is set, OK to read the temperature */
*temp = tsens_hw_to_mC(s, temp_idx);
return 0;
}
int get_temp_common(const struct tsens_sensor *s, int *temp)
{
struct tsens_priv *priv = s->priv;
int hw_id = s->hw_id;
int last_temp = 0, ret;
ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
if (ret)
return ret;
*temp = code_to_degc(last_temp, s) * 1000;
return 0;
}
#ifdef CONFIG_DEBUG_FS
static int dbg_sensors_show(struct seq_file *s, void *data)
{
struct platform_device *pdev = s->private;
struct tsens_priv *priv = platform_get_drvdata(pdev);
int i;
seq_printf(s, "max: %2d\nnum: %2d\n\n",
priv->feat->max_sensors, priv->num_sensors);
seq_puts(s, " id slope offset\n--------------------------\n");
for (i = 0; i < priv->num_sensors; i++) {
seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id,
priv->sensor[i].slope, priv->sensor[i].offset);
}
return 0;
}
static int dbg_version_show(struct seq_file *s, void *data)
{
struct platform_device *pdev = s->private;
struct tsens_priv *priv = platform_get_drvdata(pdev);
u32 maj_ver, min_ver, step_ver;
int ret;
if (tsens_version(priv) > VER_0_1) {
ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[VER_STEP], &step_ver);
if (ret)
return ret;
seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
} else {
seq_puts(s, "0.1.0\n");
}
return 0;
}
DEFINE_SHOW_ATTRIBUTE(dbg_version);
DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
static void tsens_debug_init(struct platform_device *pdev)
{
struct tsens_priv *priv = platform_get_drvdata(pdev);
struct dentry *root, *file;
root = debugfs_lookup("tsens", NULL);
if (!root)
priv->debug_root = debugfs_create_dir("tsens", NULL);
else
priv->debug_root = root;
file = debugfs_lookup("version", priv->debug_root);
if (!file)
debugfs_create_file("version", 0444, priv->debug_root,
pdev, &dbg_version_fops);
/* A directory for each instance of the TSENS IP */
priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
}
#else
static inline void tsens_debug_init(struct platform_device *pdev) {}
#endif
static const struct regmap_config tsens_config = {
.name = "tm",
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static const struct regmap_config tsens_srot_config = {
.name = "srot",
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
int __init init_common(struct tsens_priv *priv)
{
void __iomem *tm_base, *srot_base;
struct device *dev = priv->dev;
u32 ver_minor;
struct resource *res;
u32 enabled;
int ret, i, j;
struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
if (!op)
return -EINVAL;
if (op->num_resources > 1) {
/* DT with separate SROT and TM address space */
priv->tm_offset = 0;
res = platform_get_resource(op, IORESOURCE_MEM, 1);
srot_base = devm_ioremap_resource(dev, res);
if (IS_ERR(srot_base)) {
ret = PTR_ERR(srot_base);
goto err_put_device;
}
priv->srot_map = devm_regmap_init_mmio(dev, srot_base,
&tsens_srot_config);
if (IS_ERR(priv->srot_map)) {
ret = PTR_ERR(priv->srot_map);
goto err_put_device;
}
} else {
/* old DTs where SROT and TM were in a contiguous 2K block */
priv->tm_offset = 0x1000;
}
res = platform_get_resource(op, IORESOURCE_MEM, 0);
tm_base = devm_ioremap_resource(dev, res);
if (IS_ERR(tm_base)) {
ret = PTR_ERR(tm_base);
goto err_put_device;
}
priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
if (IS_ERR(priv->tm_map)) {
ret = PTR_ERR(priv->tm_map);
goto err_put_device;
}
if (tsens_version(priv) > VER_0_1) {
for (i = VER_MAJOR; i <= VER_STEP; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[i]);
if (IS_ERR(priv->rf[i]))
return PTR_ERR(priv->rf[i]);
}
ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor);
if (ret)
goto err_put_device;
}
priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[TSENS_EN]);
if (IS_ERR(priv->rf[TSENS_EN])) {
ret = PTR_ERR(priv->rf[TSENS_EN]);
goto err_put_device;
}
ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
if (ret)
goto err_put_device;
if (!enabled) {
dev_err(dev, "%s: device not enabled\n", __func__);
ret = -ENODEV;
goto err_put_device;
}
priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[SENSOR_EN]);
if (IS_ERR(priv->rf[SENSOR_EN])) {
ret = PTR_ERR(priv->rf[SENSOR_EN]);
goto err_put_device;
}
priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map,
priv->fields[INT_EN]);
if (IS_ERR(priv->rf[INT_EN])) {
ret = PTR_ERR(priv->rf[INT_EN]);
goto err_put_device;
}
/* This loop might need changes if enum regfield_ids is reordered */
for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
int idx = j + i;
priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map,
priv->fields[idx]);
if (IS_ERR(priv->rf[idx])) {
ret = PTR_ERR(priv->rf[idx]);
goto err_put_device;
}
}
}
if (priv->feat->crit_int) {
/* Loop might need changes if enum regfield_ids is reordered */
for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
int idx = j + i;
priv->rf[idx] =
devm_regmap_field_alloc(dev,
priv->tm_map,
priv->fields[idx]);
if (IS_ERR(priv->rf[idx])) {
ret = PTR_ERR(priv->rf[idx]);
goto err_put_device;
}
}
}
}
if (tsens_version(priv) > VER_1_X && ver_minor > 2) {
/* Watchdog is present only on v2.3+ */
priv->feat->has_watchdog = 1;
for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map,
priv->fields[i]);
if (IS_ERR(priv->rf[i])) {
ret = PTR_ERR(priv->rf[i]);
goto err_put_device;
}
}
/*
* Watchdog is already enabled, unmask the bark.
* Disable cycle completion monitoring
*/
regmap_field_write(priv->rf[WDOG_BARK_MASK], 0);
regmap_field_write(priv->rf[CC_MON_MASK], 1);
}
spin_lock_init(&priv->ul_lock);
tsens_enable_irq(priv);
tsens_debug_init(op);
err_put_device:
put_device(&op->dev);
return ret;
}
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2019, 2020, Linaro Ltd.
*/
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#include "tsens.h"
/**
* struct tsens_irq_data - IRQ status and temperature violations
* @up_viol: upper threshold violated
* @up_thresh: upper threshold temperature value
* @up_irq_mask: mask register for upper threshold irqs
* @up_irq_clear: clear register for uppper threshold irqs
* @low_viol: lower threshold violated
* @low_thresh: lower threshold temperature value
* @low_irq_mask: mask register for lower threshold irqs
* @low_irq_clear: clear register for lower threshold irqs
* @crit_viol: critical threshold violated
* @crit_thresh: critical threshold temperature value
* @crit_irq_mask: mask register for critical threshold irqs
* @crit_irq_clear: clear register for critical threshold irqs
*
* Structure containing data about temperature threshold settings and
* irq status if they were violated.
*/
struct tsens_irq_data {
u32 up_viol;
int up_thresh;
u32 up_irq_mask;
u32 up_irq_clear;
u32 low_viol;
int low_thresh;
u32 low_irq_mask;
u32 low_irq_clear;
u32 crit_viol;
u32 crit_thresh;
u32 crit_irq_mask;
u32 crit_irq_clear;
};
char *qfprom_read(struct device *dev, const char *cname)
{
struct nvmem_cell *cell;
ssize_t data;
char *ret;
cell = nvmem_cell_get(dev, cname);
if (IS_ERR(cell))
return ERR_CAST(cell);
ret = nvmem_cell_read(cell, &data);
nvmem_cell_put(cell);
return ret;
}
/*
* Use this function on devices where slope and offset calculations
* depend on calibration data read from qfprom. On others the slope
* and offset values are derived from tz->tzp->slope and tz->tzp->offset
* resp.
*/
void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
u32 *p2, u32 mode)
{
int i;
int num, den;
for (i = 0; i < priv->num_sensors; i++) {
dev_dbg(priv->dev,
"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
__func__, i, p1[i], p2[i]);
priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
/*
* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
* temp_120_degc - temp_30_degc (x2 - x1)
*/
num = p2[i] - p1[i];
num *= SLOPE_FACTOR;
den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
priv->sensor[i].slope = num / den;
}
priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
(CAL_DEGC_PT1 *
priv->sensor[i].slope);
dev_dbg(priv->dev, "%s: offset:%d\n", __func__,
priv->sensor[i].offset);
}
}
static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
{
u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR);
pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);
}
static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
{
int degc, num, den;
num = (adc_code * SLOPE_FACTOR) - s->offset;
den = s->slope;
if (num > 0)
degc = num + (den / 2);
else if (num < 0)
degc = num - (den / 2);
else
degc = num;
degc /= den;
return degc;
}
/**
* tsens_hw_to_mC - Return sign-extended temperature in mCelsius.
* @s: Pointer to sensor struct
* @field: Index into regmap_field array pointing to temperature data
*
* This function handles temperature returned in ADC code or deciCelsius
* depending on IP version.
*
* Return: Temperature in milliCelsius on success, a negative errno will
* be returned in error cases
*/
static int tsens_hw_to_mC(const struct tsens_sensor *s, int field)
{
struct tsens_priv *priv = s->priv;
u32 resolution;
u32 temp = 0;
int ret;
resolution = priv->fields[LAST_TEMP_0].msb -
priv->fields[LAST_TEMP_0].lsb;
ret = regmap_field_read(priv->rf[field], &temp);
if (ret)
return ret;
/* Convert temperature from ADC code to milliCelsius */
if (priv->feat->adc)
return code_to_degc(temp, s) * 1000;
/* deciCelsius -> milliCelsius along with sign extension */
return sign_extend32(temp, resolution) * 100;
}
/**
* tsens_mC_to_hw - Convert temperature to hardware register value
* @s: Pointer to sensor struct
* @temp: temperature in milliCelsius to be programmed to hardware
*
* This function outputs the value to be written to hardware in ADC code
* or deciCelsius depending on IP version.
*
* Return: ADC code or temperature in deciCelsius.
*/
static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp)
{
struct tsens_priv *priv = s->priv;
/* milliC to adc code */
if (priv->feat->adc)
return degc_to_code(temp / 1000, s);
/* milliC to deciC */
return temp / 100;
}
static inline enum tsens_ver tsens_version(struct tsens_priv *priv)
{
return priv->feat->ver_major;
}
static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id,
enum tsens_irq_type irq_type, bool enable)
{
u32 index = 0;
switch (irq_type) {
case UPPER:
index = UP_INT_CLEAR_0 + hw_id;
break;
case LOWER:
index = LOW_INT_CLEAR_0 + hw_id;
break;
case CRITICAL:
/* No critical interrupts before v2 */
return;
}
regmap_field_write(priv->rf[index], enable ? 0 : 1);
}
static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id,
enum tsens_irq_type irq_type, bool enable)
{
u32 index_mask = 0, index_clear = 0;
/*
* To enable the interrupt flag for a sensor:
* - clear the mask bit
* To disable the interrupt flag for a sensor:
* - Mask further interrupts for this sensor
* - Write 1 followed by 0 to clear the interrupt
*/
switch (irq_type) {
case UPPER:
index_mask = UP_INT_MASK_0 + hw_id;
index_clear = UP_INT_CLEAR_0 + hw_id;
break;
case LOWER:
index_mask = LOW_INT_MASK_0 + hw_id;
index_clear = LOW_INT_CLEAR_0 + hw_id;
break;
case CRITICAL:
index_mask = CRIT_INT_MASK_0 + hw_id;
index_clear = CRIT_INT_CLEAR_0 + hw_id;
break;
}
if (enable) {
regmap_field_write(priv->rf[index_mask], 0);
} else {
regmap_field_write(priv->rf[index_mask], 1);
regmap_field_write(priv->rf[index_clear], 1);
regmap_field_write(priv->rf[index_clear], 0);
}
}
/**
* tsens_set_interrupt - Set state of an interrupt
* @priv: Pointer to tsens controller private data
* @hw_id: Hardware ID aka. sensor number
* @irq_type: irq_type from enum tsens_irq_type
* @enable: false = disable, true = enable
*
* Call IP-specific function to set state of an interrupt
*
* Return: void
*/
static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id,
enum tsens_irq_type irq_type, bool enable)
{
dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__,
irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW",
enable ? "en" : "dis");
if (tsens_version(priv) > VER_1_X)
tsens_set_interrupt_v2(priv, hw_id, irq_type, enable);
else
tsens_set_interrupt_v1(priv, hw_id, irq_type, enable);
}
/**
* tsens_threshold_violated - Check if a sensor temperature violated a preset threshold
* @priv: Pointer to tsens controller private data
* @hw_id: Hardware ID aka. sensor number
* @d: Pointer to irq state data
*
* Return: 0 if threshold was not violated, 1 if it was violated and negative
* errno in case of errors
*/
static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id,
struct tsens_irq_data *d)
{
int ret;
ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol);
if (ret)
return ret;
if (priv->feat->crit_int) {
ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id],
&d->crit_viol);
if (ret)
return ret;
}
if (d->up_viol || d->low_viol || d->crit_viol)
return 1;
return 0;
}
static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id,
const struct tsens_sensor *s,
struct tsens_irq_data *d)
{
int ret;
ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear);
if (ret)
return ret;
if (tsens_version(priv) > VER_1_X) {
ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id],
&d->crit_irq_clear);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id],
&d->crit_irq_mask);
if (ret)
return ret;
d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id);
} else {
/* No mask register on older TSENS */
d->up_irq_mask = 0;
d->low_irq_mask = 0;
d->crit_irq_clear = 0;
d->crit_irq_mask = 0;
d->crit_thresh = 0;
}
d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id);
d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id);
dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n",
hw_id, __func__,
(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
d->low_viol, d->up_viol, d->crit_viol,
d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear,
d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask);
dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__,
(d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "",
d->low_thresh, d->up_thresh, d->crit_thresh);
return 0;
}
static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
{
if (ver > VER_1_X)
return mask & (1 << hw_id);
/* v1, v0.1 don't have a irq mask register */
return 0;
}
/**
* tsens_critical_irq_thread() - Threaded handler for critical interrupts
* @irq: irq number
* @data: tsens controller private data
*
* Check FSM watchdog bark status and clear if needed.
* Check all sensors to find ones that violated their critical threshold limits.
* Clear and then re-enable the interrupt.
*
* The level-triggered interrupt might deassert if the temperature returned to
* within the threshold limits by the time the handler got scheduled. We
* consider the irq to have been handled in that case.
*
* Return: IRQ_HANDLED
*/
irqreturn_t tsens_critical_irq_thread(int irq, void *data)
{
struct tsens_priv *priv = data;
struct tsens_irq_data d;
int temp, ret, i;
u32 wdog_status, wdog_count;
if (priv->feat->has_watchdog) {
ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS],
&wdog_status);
if (ret)
return ret;
if (wdog_status) {
/* Clear WDOG interrupt */
regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1);
regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0);
ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT],
&wdog_count);
if (ret)
return ret;
if (wdog_count)
dev_dbg(priv->dev, "%s: watchdog count: %d\n",
__func__, wdog_count);
/* Fall through to handle critical interrupts if any */
}
}
for (i = 0; i < priv->num_sensors; i++) {
const struct tsens_sensor *s = &priv->sensor[i];
u32 hw_id = s->hw_id;
if (IS_ERR(s->tzd))
continue;
if (!tsens_threshold_violated(priv, hw_id, &d))
continue;
ret = get_temp_tsens_valid(s, &temp);
if (ret) {
dev_err(priv->dev, "[%u] %s: error reading sensor\n",
hw_id, __func__);
continue;
}
tsens_read_irq_state(priv, hw_id, s, &d);
if (d.crit_viol &&
!masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) {
/* Mask critical interrupts, unused on Linux */
tsens_set_interrupt(priv, hw_id, CRITICAL, false);
}
}
return IRQ_HANDLED;
}
/**
* tsens_irq_thread - Threaded interrupt handler for uplow interrupts
* @irq: irq number
* @data: tsens controller private data
*
* Check all sensors to find ones that violated their threshold limits. If the
* temperature is still outside the limits, call thermal_zone_device_update() to
* update the thresholds, else re-enable the interrupts.
*
* The level-triggered interrupt might deassert if the temperature returned to
* within the threshold limits by the time the handler got scheduled. We
* consider the irq to have been handled in that case.
*
* Return: IRQ_HANDLED
*/
irqreturn_t tsens_irq_thread(int irq, void *data)
{
struct tsens_priv *priv = data;
struct tsens_irq_data d;
bool enable = true, disable = false;
unsigned long flags;
int temp, ret, i;
for (i = 0; i < priv->num_sensors; i++) {
bool trigger = false;
const struct tsens_sensor *s = &priv->sensor[i];
u32 hw_id = s->hw_id;
if (IS_ERR(s->tzd))
continue;
if (!tsens_threshold_violated(priv, hw_id, &d))
continue;
ret = get_temp_tsens_valid(s, &temp);
if (ret) {
dev_err(priv->dev, "[%u] %s: error reading sensor\n",
hw_id, __func__);
continue;
}
spin_lock_irqsave(&priv->ul_lock, flags);
tsens_read_irq_state(priv, hw_id, s, &d);
if (d.up_viol &&
!masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) {
tsens_set_interrupt(priv, hw_id, UPPER, disable);
if (d.up_thresh > temp) {
dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
hw_id, __func__);
tsens_set_interrupt(priv, hw_id, UPPER, enable);
} else {
trigger = true;
/* Keep irq masked */
}
} else if (d.low_viol &&
!masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) {
tsens_set_interrupt(priv, hw_id, LOWER, disable);
if (d.low_thresh < temp) {
dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
hw_id, __func__);
tsens_set_interrupt(priv, hw_id, LOWER, enable);
} else {
trigger = true;
/* Keep irq masked */
}
}
spin_unlock_irqrestore(&priv->ul_lock, flags);
if (trigger) {
dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
hw_id, __func__, temp);
thermal_zone_device_update(s->tzd,
THERMAL_EVENT_UNSPECIFIED);
} else {
dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
hw_id, __func__, temp);
}
}
return IRQ_HANDLED;
}
int tsens_set_trips(void *_sensor, int low, int high)
{
struct tsens_sensor *s = _sensor;
struct tsens_priv *priv = s->priv;
struct device *dev = priv->dev;
struct tsens_irq_data d;
unsigned long flags;
int high_val, low_val, cl_high, cl_low;
u32 hw_id = s->hw_id;
dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
hw_id, __func__, low, high);
cl_high = clamp_val(high, -40000, 120000);
cl_low = clamp_val(low, -40000, 120000);
high_val = tsens_mC_to_hw(s, cl_high);
low_val = tsens_mC_to_hw(s, cl_low);
spin_lock_irqsave(&priv->ul_lock, flags);
tsens_read_irq_state(priv, hw_id, s, &d);
/* Write the new thresholds and clear the status */
regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val);
regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val);
tsens_set_interrupt(priv, hw_id, LOWER, true);
tsens_set_interrupt(priv, hw_id, UPPER, true);
spin_unlock_irqrestore(&priv->ul_lock, flags);
dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
return 0;
}
int tsens_enable_irq(struct tsens_priv *priv)
{
int ret;
int val = tsens_version(priv) > VER_1_X ? 7 : 1;
ret = regmap_field_write(priv->rf[INT_EN], val);
if (ret < 0)
dev_err(priv->dev, "%s: failed to enable interrupts\n",
__func__);
return ret;
}
void tsens_disable_irq(struct tsens_priv *priv)
{
regmap_field_write(priv->rf[INT_EN], 0);
}
int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
{
struct tsens_priv *priv = s->priv;
int hw_id = s->hw_id;
u32 temp_idx = LAST_TEMP_0 + hw_id;
u32 valid_idx = VALID_0 + hw_id;
u32 valid;
int ret;
ret = regmap_field_read(priv->rf[valid_idx], &valid);
if (ret)
return ret;
while (!valid) {
/* Valid bit is 0 for 6 AHB clock cycles.
* At 19.2MHz, 1 AHB clock is ~60ns.
* We should enter this loop very, very rarely.
*/
ndelay(400);
ret = regmap_field_read(priv->rf[valid_idx], &valid);
if (ret)
return ret;
}
/* Valid bit is set, OK to read the temperature */
*temp = tsens_hw_to_mC(s, temp_idx);
return 0;
}
int get_temp_common(const struct tsens_sensor *s, int *temp)
{
struct tsens_priv *priv = s->priv;
int hw_id = s->hw_id;
int last_temp = 0, ret;
ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
if (ret)
return ret;
*temp = code_to_degc(last_temp, s) * 1000;
return 0;
}
#ifdef CONFIG_DEBUG_FS
static int dbg_sensors_show(struct seq_file *s, void *data)
{
struct platform_device *pdev = s->private;
struct tsens_priv *priv = platform_get_drvdata(pdev);
int i;
seq_printf(s, "max: %2d\nnum: %2d\n\n",
priv->feat->max_sensors, priv->num_sensors);
seq_puts(s, " id slope offset\n--------------------------\n");
for (i = 0; i < priv->num_sensors; i++) {
seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id,
priv->sensor[i].slope, priv->sensor[i].offset);
}
return 0;
}
static int dbg_version_show(struct seq_file *s, void *data)
{
struct platform_device *pdev = s->private;
struct tsens_priv *priv = platform_get_drvdata(pdev);
u32 maj_ver, min_ver, step_ver;
int ret;
if (tsens_version(priv) > VER_0_1) {
ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver);
if (ret)
return ret;
ret = regmap_field_read(priv->rf[VER_STEP], &step_ver);
if (ret)
return ret;
seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
} else {
seq_puts(s, "0.1.0\n");
}
return 0;
}
DEFINE_SHOW_ATTRIBUTE(dbg_version);
DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
static void tsens_debug_init(struct platform_device *pdev)
{
struct tsens_priv *priv = platform_get_drvdata(pdev);
struct dentry *root, *file;
root = debugfs_lookup("tsens", NULL);
if (!root)
priv->debug_root = debugfs_create_dir("tsens", NULL);
else
priv->debug_root = root;
file = debugfs_lookup("version", priv->debug_root);
if (!file)
debugfs_create_file("version", 0444, priv->debug_root,
pdev, &dbg_version_fops);
/* A directory for each instance of the TSENS IP */
priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
}
#else
static inline void tsens_debug_init(struct platform_device *pdev) {}
#endif
static const struct regmap_config tsens_config = {
.name = "tm",
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static const struct regmap_config tsens_srot_config = {
.name = "srot",
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
int __init init_common(struct tsens_priv *priv)
{
void __iomem *tm_base, *srot_base;
struct device *dev = priv->dev;
u32 ver_minor;
struct resource *res;
u32 enabled;
int ret, i, j;
struct platform_device *op = of_find_device_by_node(priv->dev->of_node);
if (!op)
return -EINVAL;
if (op->num_resources > 1) {
/* DT with separate SROT and TM address space */
priv->tm_offset = 0;
res = platform_get_resource(op, IORESOURCE_MEM, 1);
srot_base = devm_ioremap_resource(dev, res);
if (IS_ERR(srot_base)) {
ret = PTR_ERR(srot_base);
goto err_put_device;
}
priv->srot_map = devm_regmap_init_mmio(dev, srot_base,
&tsens_srot_config);
if (IS_ERR(priv->srot_map)) {
ret = PTR_ERR(priv->srot_map);
goto err_put_device;
}
} else {
/* old DTs where SROT and TM were in a contiguous 2K block */
priv->tm_offset = 0x1000;
}
res = platform_get_resource(op, IORESOURCE_MEM, 0);
tm_base = devm_ioremap_resource(dev, res);
if (IS_ERR(tm_base)) {
ret = PTR_ERR(tm_base);
goto err_put_device;
}
priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
if (IS_ERR(priv->tm_map)) {
ret = PTR_ERR(priv->tm_map);
goto err_put_device;
}
if (tsens_version(priv) > VER_0_1) {
for (i = VER_MAJOR; i <= VER_STEP; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[i]);
if (IS_ERR(priv->rf[i]))
return PTR_ERR(priv->rf[i]);
}
ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor);
if (ret)
goto err_put_device;
}
priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[TSENS_EN]);
if (IS_ERR(priv->rf[TSENS_EN])) {
ret = PTR_ERR(priv->rf[TSENS_EN]);
goto err_put_device;
}
ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
if (ret)
goto err_put_device;
if (!enabled) {
dev_err(dev, "%s: device not enabled\n", __func__);
ret = -ENODEV;
goto err_put_device;
}
priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[SENSOR_EN]);
if (IS_ERR(priv->rf[SENSOR_EN])) {
ret = PTR_ERR(priv->rf[SENSOR_EN]);
goto err_put_device;
}
priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map,
priv->fields[INT_EN]);
if (IS_ERR(priv->rf[INT_EN])) {
ret = PTR_ERR(priv->rf[INT_EN]);
goto err_put_device;
}
/* This loop might need changes if enum regfield_ids is reordered */
for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
int idx = j + i;
priv->rf[idx] = devm_regmap_field_alloc(dev,
priv->tm_map,
priv->fields[idx]);
if (IS_ERR(priv->rf[idx])) {
ret = PTR_ERR(priv->rf[idx]);
goto err_put_device;
}
}
}
if (priv->feat->crit_int) {
/* Loop might need changes if enum regfield_ids is reordered */
for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
for (i = 0; i < priv->feat->max_sensors; i++) {
int idx = j + i;
priv->rf[idx] =
devm_regmap_field_alloc(dev,
priv->tm_map,
priv->fields[idx]);
if (IS_ERR(priv->rf[idx])) {
ret = PTR_ERR(priv->rf[idx]);
goto err_put_device;
}
}
}
}
if (tsens_version(priv) > VER_1_X && ver_minor > 2) {
/* Watchdog is present only on v2.3+ */
priv->feat->has_watchdog = 1;
for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) {
priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map,
priv->fields[i]);
if (IS_ERR(priv->rf[i])) {
ret = PTR_ERR(priv->rf[i]);
goto err_put_device;
}
}
/*
* Watchdog is already enabled, unmask the bark.
* Disable cycle completion monitoring
*/
regmap_field_write(priv->rf[WDOG_BARK_MASK], 0);
regmap_field_write(priv->rf[CC_MON_MASK], 1);
}
spin_lock_init(&priv->ul_lock);
tsens_enable_irq(priv);
tsens_debug_init(op);
err_put_device:
put_device(&op->dev);
return ret;
}
static int tsens_get_temp(void *data, int *temp)
{
struct tsens_sensor *s = data;
......
......@@ -580,11 +580,6 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mo
int init_common(struct tsens_priv *priv);
int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp);
int get_temp_common(const struct tsens_sensor *s, int *temp);
int tsens_enable_irq(struct tsens_priv *priv);
void tsens_disable_irq(struct tsens_priv *priv);
int tsens_set_trips(void *_sensor, int low, int high);
irqreturn_t tsens_irq_thread(int irq, void *data);
irqreturn_t tsens_critical_irq_thread(int irq, void *data);
/* TSENS target */
extern struct tsens_plat_data data_8960;
......
......@@ -11,6 +11,7 @@
#include <linux/regmap.h>
#include <linux/sizes.h>
#include <linux/thermal.h>
#include <linux/units.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
......@@ -23,6 +24,7 @@
#define TMTMIR_DEFAULT 0x0000000f
#define TIER_DISABLE 0x0
#define TEUMR0_V2 0x51009c00
#define TMSARA_V2 0xe
#define TMU_VER1 0x1
#define TMU_VER2 0x2
......@@ -50,6 +52,9 @@
* Site Register
*/
#define TRITSR_V BIT(31)
#define REGS_V2_TMSAR(n) (0x304 + 16 * (n)) /* TMU monitoring
* site adjustment register
*/
#define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n
* Control Register
*/
......@@ -85,12 +90,21 @@ static int tmu_get_temp(void *p, int *temp)
/*
* REGS_TRITSR(id) has the following layout:
*
* For TMU Rev1:
* 31 ... 7 6 5 4 3 2 1 0
* V TEMP
*
* Where V bit signifies if the measurement is ready and is
* within sensor range. TEMP is an 8 bit value representing
* temperature in C.
* temperature in Celsius.
* For TMU Rev2:
* 31 ... 8 7 6 5 4 3 2 1 0
* V TEMP
*
* Where V bit signifies if the measurement is ready and is
* within sensor range. TEMP is an 9 bit value representing
* temperature in KelVin.
*/
if (regmap_read_poll_timeout(qdata->regmap,
REGS_TRITSR(qsensor->id),
......@@ -100,7 +114,10 @@ static int tmu_get_temp(void *p, int *temp)
10 * USEC_PER_MSEC))
return -ENODATA;
*temp = (val & 0xff) * 1000;
if (qdata->ver == TMU_VER1)
*temp = (val & GENMASK(7, 0)) * MILLIDEGREE_PER_DEGREE;
else
*temp = kelvin_to_millicelsius(val & GENMASK(8, 0));
return 0;
}
......@@ -192,6 +209,8 @@ static int qoriq_tmu_calibration(struct device *dev,
static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
{
int i;
/* Disable interrupt, using polling instead */
regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
......@@ -202,6 +221,8 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
} else {
regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
for (i = 0; i < SITES_MAX; i++)
regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2);
}
/* Disable monitoring */
......@@ -212,6 +233,7 @@ static const struct regmap_range qoriq_yes_ranges[] = {
regmap_reg_range(REGS_TMR, REGS_TSCFGR),
regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)),
regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
/* Read only registers below */
regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
......
......@@ -198,8 +198,8 @@ static void _rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg,
static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
{
struct device *dev = rcar_priv_to_dev(priv);
int i;
u32 ctemp, old, new;
int old, new, ctemp = -EINVAL;
unsigned int i;
mutex_lock(&priv->lock);
......@@ -209,7 +209,6 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
*/
rcar_thermal_bset(priv, THSCR, CPCTL, CPCTL);
ctemp = 0;
old = ~0;
for (i = 0; i < 128; i++) {
/*
......@@ -227,7 +226,7 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
old = new;
}
if (!ctemp) {
if (ctemp < 0) {
dev_err(dev, "thermal sensor was broken\n");
goto err_out_unlock;
}
......@@ -248,7 +247,7 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
err_out_unlock:
mutex_unlock(&priv->lock);
return ctemp ? ctemp : -EINVAL;
return ctemp;
}
static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
......
......@@ -1241,10 +1241,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
return -ENXIO;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
if (irq < 0)
return -EINVAL;
}
thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data),
GFP_KERNEL);
......
......@@ -94,10 +94,8 @@ static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
int ret;
sensor->irq = platform_get_irq(pdev, 0);
if (sensor->irq < 0) {
dev_err(dev, "failed to register IRQ\n");
if (sensor->irq < 0)
return sensor->irq;
}
ret = devm_request_threaded_irq(dev, sensor->irq,
NULL, st_mmap_thermal_trip_handler,
......
......@@ -385,10 +385,8 @@ static int stm_register_irq(struct stm_thermal_sensor *sensor)
int ret;
sensor->irq = platform_get_irq(pdev, 0);
if (sensor->irq < 0) {
dev_err(dev, "%s: Unable to find IRQ\n", __func__);
if (sensor->irq < 0)
return sensor->irq;
}
ret = devm_request_threaded_irq(dev, sensor->irq,
NULL,
......
......@@ -9,9 +9,9 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/kdev_t.h>
#include <linux/idr.h>
......@@ -27,10 +27,6 @@
#include "thermal_core.h"
#include "thermal_hwmon.h"
MODULE_AUTHOR("Zhang Rui");
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL v2");
static DEFINE_IDA(thermal_tz_ida);
static DEFINE_IDA(thermal_cdev_ida);
......@@ -447,12 +443,6 @@ static void update_temperature(struct thermal_zone_device *tz)
mutex_unlock(&tz->lock);
trace_thermal_temperature(tz);
if (tz->last_temperature == THERMAL_TEMP_INVALID)
dev_dbg(&tz->device, "last_temperature N/A, current_temperature=%d\n",
tz->temperature);
else
dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
tz->last_temperature, tz->temperature);
}
static void thermal_zone_device_init(struct thermal_zone_device *tz)
......
......@@ -12,6 +12,17 @@
#include <linux/device.h>
#include <linux/thermal.h>
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
#define DEFAULT_THERMAL_GOVERNOR "step_wise"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
#define DEFAULT_THERMAL_GOVERNOR "fair_share"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
#define DEFAULT_THERMAL_GOVERNOR "user_space"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
#define DEFAULT_THERMAL_GOVERNOR "power_allocator"
#endif
/* Initial state of a cooling device during binding */
#define THERMAL_NO_TARGET -1UL
......@@ -30,6 +41,44 @@ extern struct thermal_governor *__governor_thermal_table_end[];
__governor < __governor_thermal_table_end; \
__governor++)
struct thermal_attr {
struct device_attribute attr;
char name[THERMAL_NAME_LENGTH];
};
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{
return cdev->ops->get_requested_power && cdev->ops->state2power &&
cdev->ops->power2state;
}
int power_actor_get_max_power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz, u32 *max_power);
int power_actor_get_min_power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz, u32 *min_power);
int power_actor_set_power(struct thermal_cooling_device *cdev,
struct thermal_instance *ti, u32 power);
/**
* struct thermal_trip - representation of a point in temperature domain
* @np: pointer to struct device_node that this trip point was created from
* @temperature: temperature value in miliCelsius
* @hysteresis: relative hysteresis in miliCelsius
* @type: trip point type
*/
struct thermal_trip {
struct device_node *np;
int temperature;
int hysteresis;
enum thermal_trip_type type;
};
int get_tz_trend(struct thermal_zone_device *tz, int trip);
struct thermal_instance *
get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev,
int trip);
/*
* This structure is used to describe the behavior of
* a certain cooling device on a certain trip point
......@@ -69,6 +118,9 @@ void thermal_zone_device_unbind_exception(struct thermal_zone_device *,
int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
int thermal_build_list_of_policies(char *buf);
/* Helpers */
void thermal_zone_set_trips(struct thermal_zone_device *tz);
/* sysfs I/F */
int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
......
......@@ -12,11 +12,12 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysfs.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysfs.h>
#include <trace/events/thermal.h>
......@@ -113,6 +114,18 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
}
EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
/**
* thermal_zone_set_trips - Computes the next trip points for the driver
* @tz: a pointer to a thermal zone device structure
*
* The function computes the next temperature boundaries by browsing
* the trip points. The result is the closer low and high trip points
* to the current temperature. These values are passed to the backend
* driver to let it set its own notification mechanism (usually an
* interrupt).
*
* It does not return a value
*/
void thermal_zone_set_trips(struct thermal_zone_device *tz)
{
int low = -INT_MAX;
......@@ -161,7 +174,6 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz)
exit:
mutex_unlock(&tz->lock);
}
EXPORT_SYMBOL_GPL(thermal_zone_set_trips);
void thermal_cdev_update(struct thermal_cooling_device *cdev)
{
......
......@@ -10,10 +10,12 @@
* Copyright (C) 2013 Texas Instruments
* Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
*/
#include <linux/err.h>
#include <linux/export.h>
#include <linux/hwmon.h>
#include <linux/thermal.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/thermal.h>
#include "thermal_hwmon.h"
/* hwmon sys I/F */
......
......@@ -8,13 +8,13 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/thermal.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#include <linux/types.h>
#include <linux/string.h>
#include "thermal_core.h"
......
......@@ -772,10 +772,9 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
int ret;
bgp->irq = platform_get_irq(pdev, 0);
if (bgp->irq < 0) {
dev_err(&pdev->dev, "get_irq failed\n");
if (bgp->irq < 0)
return bgp->irq;
}
ret = request_threaded_irq(bgp->irq, NULL,
ti_bandgap_talert_irq_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
......
......@@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
data = ti_bandgap_get_sensor_data(bgp, id);
if (!data || IS_ERR(data))
if (!IS_ERR_OR_NULL(data))
data = ti_thermal_build_data(bgp, id);
if (!data)
......@@ -196,7 +196,7 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
data = ti_bandgap_get_sensor_data(bgp, id);
if (data && data->ti_thermal) {
if (!IS_ERR_OR_NULL(data) && data->ti_thermal) {
if (data->our_zone)
thermal_zone_device_unregister(data->ti_thermal);
}
......@@ -262,7 +262,7 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
data = ti_bandgap_get_sensor_data(bgp, id);
if (data) {
if (!IS_ERR_OR_NULL(data)) {
cpufreq_cooling_unregister(data->cool_dev);
if (data->policy)
cpufreq_cpu_put(data->policy);
......
......@@ -63,18 +63,10 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy)
struct cpuidle_driver;
#ifdef CONFIG_CPU_IDLE_THERMAL
int cpuidle_cooling_register(struct cpuidle_driver *drv);
int cpuidle_of_cooling_register(struct device_node *np,
struct cpuidle_driver *drv);
void cpuidle_cooling_register(struct cpuidle_driver *drv);
#else /* CONFIG_CPU_IDLE_THERMAL */
static inline int cpuidle_cooling_register(struct cpuidle_driver *drv)
static inline void cpuidle_cooling_register(struct cpuidle_driver *drv)
{
return 0;
}
static inline int cpuidle_of_cooling_register(struct device_node *np,
struct cpuidle_driver *drv)
{
return 0;
}
#endif /* CONFIG_CPU_IDLE_THERMAL */
......
......@@ -26,4 +26,8 @@ void idle_inject_set_duration(struct idle_inject_device *ii_dev,
void idle_inject_get_duration(struct idle_inject_device *ii_dev,
unsigned int *run_duration_us,
unsigned int *idle_duration_us);
void idle_inject_set_latency(struct idle_inject_device *ii_dev,
unsigned int latency_ns);
#endif /* __IDLE_INJECT_H__ */
......@@ -32,20 +32,10 @@
/* use value, which < 0K, to indicate an invalid/uninitialized temperature */
#define THERMAL_TEMP_INVALID -274000
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
#define DEFAULT_THERMAL_GOVERNOR "step_wise"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
#define DEFAULT_THERMAL_GOVERNOR "fair_share"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
#define DEFAULT_THERMAL_GOVERNOR "user_space"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
#define DEFAULT_THERMAL_GOVERNOR "power_allocator"
#endif
struct thermal_zone_device;
struct thermal_cooling_device;
struct thermal_instance;
struct thermal_attr;
enum thermal_device_mode {
THERMAL_DEVICE_DISABLED = 0,
......@@ -130,11 +120,6 @@ struct thermal_cooling_device {
struct list_head node;
};
struct thermal_attr {
struct device_attribute attr;
char name[THERMAL_NAME_LENGTH];
};
/**
* struct thermal_zone_device - structure for a thermal zone
* @id: unique id number for each thermal zone
......@@ -347,21 +332,6 @@ struct thermal_zone_of_device_ops {
int (*set_trip_temp)(void *, int, int);
};
/**
* struct thermal_trip - representation of a point in temperature domain
* @np: pointer to struct device_node that this trip point was created from
* @temperature: temperature value in miliCelsius
* @hysteresis: relative hysteresis in miliCelsius
* @type: trip point type
*/
struct thermal_trip {
struct device_node *np;
int temperature;
int hysteresis;
enum thermal_trip_type type;
};
/* Function declarations */
#ifdef CONFIG_THERMAL_OF
int thermal_zone_of_get_sensor_id(struct device_node *tz_np,
......@@ -413,19 +383,7 @@ void devm_thermal_zone_of_sensor_unregister(struct device *dev,
#endif
#if IS_ENABLED(CONFIG_THERMAL)
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{
return cdev->ops->get_requested_power && cdev->ops->state2power &&
cdev->ops->power2state;
}
int power_actor_get_max_power(struct thermal_cooling_device *,
struct thermal_zone_device *tz, u32 *max_power);
int power_actor_get_min_power(struct thermal_cooling_device *,
struct thermal_zone_device *tz, u32 *min_power);
int power_actor_set_power(struct thermal_cooling_device *,
struct thermal_instance *, u32);
#ifdef CONFIG_THERMAL
struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
void *, struct thermal_zone_device_ops *,
struct thermal_zone_params *, int, int);
......@@ -439,7 +397,6 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
void thermal_zone_device_update(struct thermal_zone_device *,
enum thermal_notify_event);
void thermal_zone_set_trips(struct thermal_zone_device *);
struct thermal_cooling_device *thermal_cooling_device_register(const char *,
void *, const struct thermal_cooling_device_ops *);
......@@ -457,24 +414,9 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
int thermal_zone_get_slope(struct thermal_zone_device *tz);
int thermal_zone_get_offset(struct thermal_zone_device *tz);
int get_tz_trend(struct thermal_zone_device *, int);
struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
struct thermal_cooling_device *, int);
void thermal_cdev_update(struct thermal_cooling_device *);
void thermal_notify_framework(struct thermal_zone_device *, int);
#else
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{ return false; }
static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz, u32 *max_power)
{ return 0; }
static inline int power_actor_get_min_power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz,
u32 *min_power)
{ return -ENODEV; }
static inline int power_actor_set_power(struct thermal_cooling_device *cdev,
struct thermal_instance *tz, u32 power)
{ return 0; }
static inline struct thermal_zone_device *thermal_zone_device_register(
const char *type, int trips, int mask, void *devdata,
struct thermal_zone_device_ops *ops,
......@@ -484,21 +426,6 @@ static inline struct thermal_zone_device *thermal_zone_device_register(
static inline void thermal_zone_device_unregister(
struct thermal_zone_device *tz)
{ }
static inline int thermal_zone_bind_cooling_device(
struct thermal_zone_device *tz, int trip,
struct thermal_cooling_device *cdev,
unsigned long upper, unsigned long lower,
unsigned int weight)
{ return -ENODEV; }
static inline int thermal_zone_unbind_cooling_device(
struct thermal_zone_device *tz, int trip,
struct thermal_cooling_device *cdev)
{ return -ENODEV; }
static inline void thermal_zone_device_update(struct thermal_zone_device *tz,
enum thermal_notify_event event)
{ }
static inline void thermal_zone_set_trips(struct thermal_zone_device *tz)
{ }
static inline struct thermal_cooling_device *
thermal_cooling_device_register(char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
......@@ -530,12 +457,7 @@ static inline int thermal_zone_get_slope(
static inline int thermal_zone_get_offset(
struct thermal_zone_device *tz)
{ return -ENODEV; }
static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
{ return -ENODEV; }
static inline struct thermal_instance *
get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int trip)
{ return ERR_PTR(-ENODEV); }
static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
{ }
static inline void thermal_notify_framework(struct thermal_zone_device *tz,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment