Commit e00b12e6 authored by Peter Zijlstra's avatar Peter Zijlstra Committed by Ingo Molnar

perf/x86: Further optimize copy_from_user_nmi()

Now that we can deal with nested NMI due to IRET re-enabling NMIs and
can deal with faults from NMI by making sure we preserve CR2 over NMIs
we can in fact simply access user-space memory from NMI context.

So rewrite copy_from_user_nmi() to use __copy_from_user_inatomic() and
rework the fault path to do the minimal required work before taking
the in_atomic() fault handler.

In particular avoid perf_sw_event() which would make perf recurse on
itself (it should be harmless as our recursion protections should be
able to deal with this -- but why tempt fate).

Also rename notify_page_fault() to kprobes_fault() as that is a much
better name; there is no notifier in it and its specific to kprobes.

Don measured that his worst case NMI path shrunk from ~300K cycles to
~150K cycles.

Cc: Stephane Eranian <eranian@google.com>
Cc: jmario@redhat.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: dave.hansen@linux.intel.com
Tested-by: default avatarDon Zickus <dzickus@redhat.com>
Signed-off-by: default avatarPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131024105206.GM2490@laptop.programming.kicks-ass.netSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 2c42cfbf
......@@ -11,39 +11,26 @@
#include <linux/sched.h>
/*
* best effort, GUP based copy_from_user() that is NMI-safe
* We rely on the nested NMI work to allow atomic faults from the NMI path; the
* nested NMI paths are careful to preserve CR2.
*/
unsigned long
copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
{
unsigned long offset, addr = (unsigned long)from;
unsigned long size, len = 0;
struct page *page;
void *map;
int ret;
unsigned long ret;
if (__range_not_ok(from, n, TASK_SIZE))
return len;
return 0;
do {
ret = __get_user_pages_fast(addr, 1, 0, &page);
if (!ret)
break;
offset = addr & (PAGE_SIZE - 1);
size = min(PAGE_SIZE - offset, n - len);
map = kmap_atomic(page);
memcpy(to, map+offset, size);
kunmap_atomic(map);
put_page(page);
len += size;
to += size;
addr += size;
} while (len < n);
/*
* Even though this function is typically called from NMI/IRQ context
* disable pagefaults so that its behaviour is consistent even when
* called form other contexts.
*/
pagefault_disable();
ret = __copy_from_user_inatomic(to, from, n);
pagefault_enable();
return len;
return n - ret;
}
EXPORT_SYMBOL_GPL(copy_from_user_nmi);
......@@ -51,7 +51,7 @@ kmmio_fault(struct pt_regs *regs, unsigned long addr)
return 0;
}
static inline int __kprobes notify_page_fault(struct pt_regs *regs)
static inline int __kprobes kprobes_fault(struct pt_regs *regs)
{
int ret = 0;
......@@ -1048,7 +1048,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
return;
/* kprobes don't want to hook the spurious faults: */
if (notify_page_fault(regs))
if (kprobes_fault(regs))
return;
/*
* Don't take the mm semaphore here. If we fixup a prefetch
......@@ -1060,23 +1060,8 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
}
/* kprobes don't want to hook the spurious faults: */
if (unlikely(notify_page_fault(regs)))
if (unlikely(kprobes_fault(regs)))
return;
/*
* It's safe to allow irq's after cr2 has been saved and the
* vmalloc fault has been handled.
*
* User-mode registers count as a user access even for any
* potential system fault or CPU buglet:
*/
if (user_mode_vm(regs)) {
local_irq_enable();
error_code |= PF_USER;
flags |= FAULT_FLAG_USER;
} else {
if (regs->flags & X86_EFLAGS_IF)
local_irq_enable();
}
if (unlikely(error_code & PF_RSVD))
pgtable_bad(regs, error_code, address);
......@@ -1088,8 +1073,6 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
}
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
/*
* If we're in an interrupt, have no user context or are running
* in an atomic region then we must not take the fault:
......@@ -1099,6 +1082,24 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
return;
}
/*
* It's safe to allow irq's after cr2 has been saved and the
* vmalloc fault has been handled.
*
* User-mode registers count as a user access even for any
* potential system fault or CPU buglet:
*/
if (user_mode_vm(regs)) {
local_irq_enable();
error_code |= PF_USER;
flags |= FAULT_FLAG_USER;
} else {
if (regs->flags & X86_EFLAGS_IF)
local_irq_enable();
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (error_code & PF_WRITE)
flags |= FAULT_FLAG_WRITE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment