Commit e05d723f authored by Thomas Gleixner's avatar Thomas Gleixner Committed by Linus Torvalds

[PATCH] i386, apic: clean up the APIC code

The apic code is quite unstructured and missing a lot of comments.

- Restructure the code into helper functions, timer, setup/shutdown,
  interrupt and power management blocks.
- Fixup comments.
- Namespace fixups
- Inline helpers for version and is_integrated
- Combine the ack_bad_irq functions

No functional changes.
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Cc: Zachary Amsden <zach@vmware.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent d66bea57
...@@ -44,6 +44,13 @@ ...@@ -44,6 +44,13 @@
#include "io_ports.h" #include "io_ports.h"
/*
* Sanity check
*/
#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F
# error SPURIOUS_APIC_VECTOR definition error
#endif
/* /*
* cpu_mask that denotes the CPUs that needs timer interrupt coming in as * cpu_mask that denotes the CPUs that needs timer interrupt coming in as
* IPIs in place of local APIC timers * IPIs in place of local APIC timers
...@@ -52,561 +59,560 @@ static cpumask_t timer_bcast_ipi; ...@@ -52,561 +59,560 @@ static cpumask_t timer_bcast_ipi;
/* /*
* Knob to control our willingness to enable the local APIC. * Knob to control our willingness to enable the local APIC.
*
* -1=force-disable, +1=force-enable
*/ */
static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ static int enable_local_apic __initdata = 0;
static inline void lapic_disable(void)
{
enable_local_apic = -1;
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
}
static inline void lapic_enable(void)
{
enable_local_apic = 1;
}
/* /*
* Debug level * Debug level, exported for io_apic.c
*/ */
int apic_verbosity; int apic_verbosity;
static void apic_pm_activate(void); static void apic_pm_activate(void);
static int modern_apic(void)
/* Using APIC to generate smp_local_timer_interrupt? */
int using_apic_timer __read_mostly = 0;
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
/*
* Get the LAPIC version
*/
static inline int lapic_get_version(void)
{ {
unsigned int lvr, version; return GET_APIC_VERSION(apic_read(APIC_LVR));
/* AMD systems use old APIC versions, so check the CPU */
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 >= 0xf)
return 1;
lvr = apic_read(APIC_LVR);
version = GET_APIC_VERSION(lvr);
return version >= 0x14;
} }
/* /*
* 'what should we do if we get a hw irq event on an illegal vector'. * Check, if the APIC is integrated or a seperate chip
* each architecture has to answer this themselves.
*/ */
void ack_bad_irq(unsigned int irq) static inline int lapic_is_integrated(void)
{ {
printk("unexpected IRQ trap at vector %02x\n", irq); return APIC_INTEGRATED(lapic_get_version());
/*
* Currently unexpected vectors happen only on SMP and APIC.
* We _must_ ack these because every local APIC has only N
* irq slots per priority level, and a 'hanging, unacked' IRQ
* holds up an irq slot - in excessive cases (when multiple
* unexpected vectors occur) that might lock up the APIC
* completely.
* But only ack when the APIC is enabled -AK
*/
if (cpu_has_apic)
ack_APIC_irq();
} }
void __init apic_intr_init(void) /*
* Check, whether this is a modern or a first generation APIC
*/
static int modern_apic(void)
{ {
#ifdef CONFIG_SMP /* AMD systems use old APIC versions, so check the CPU */
smp_intr_init(); if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
#endif boot_cpu_data.x86 >= 0xf)
/* self generated IPI for local APIC timer */ return 1;
set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); return lapic_get_version() >= 0x14;
/* IPI vectors for APIC spurious and error interrupts */
set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* thermal monitor LVT interrupt */
#ifdef CONFIG_X86_MCE_P4THERMAL
set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
} }
/* Using APIC to generate smp_local_timer_interrupt? */ /**
int using_apic_timer __read_mostly = 0; * enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
static int enabled_via_apicbase;
void enable_NMI_through_LVT0 (void * dummy) void enable_NMI_through_LVT0 (void * dummy)
{ {
unsigned int v, ver; unsigned int v = APIC_DM_NMI;
ver = apic_read(APIC_LVR); /* Level triggered for 82489DX */
ver = GET_APIC_VERSION(ver); if (!lapic_is_integrated())
v = APIC_DM_NMI; /* unmask and set to NMI */
if (!APIC_INTEGRATED(ver)) /* 82489DX */
v |= APIC_LVT_LEVEL_TRIGGER; v |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT0, v); apic_write_around(APIC_LVT0, v);
} }
/**
* get_physical_broadcast - Get number of physical broadcast IDs
*/
int get_physical_broadcast(void) int get_physical_broadcast(void)
{ {
if (modern_apic()) return modern_apic() ? 0xff : 0xf;
return 0xff;
else
return 0xf;
} }
int get_maxlvt(void) /**
* lapic_get_maxlvt - get the maximum number of local vector table entries
*/
int lapic_get_maxlvt(void)
{ {
unsigned int v, ver, maxlvt; unsigned int v = apic_read(APIC_LVR);
v = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(v);
/* 82489DXs do not report # of LVT entries. */ /* 82489DXs do not report # of LVT entries. */
maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2; return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
return maxlvt;
} }
void clear_local_APIC(void) /*
* Local APIC timer
*/
/*
* This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts
* per second. We assume that the caller has already set up the local
* APIC.
*
* The APIC timer is not exactly sync with the external timer chip, it
* closely follows bus clocks.
*/
/*
* The timer chip is already set up at HZ interrupts per second here,
* but we do not accept timer interrupts yet. We only allow the BP
* to calibrate.
*/
static unsigned int __devinit get_8254_timer_count(void)
{ {
int maxlvt; unsigned long flags;
unsigned long v;
maxlvt = get_maxlvt(); unsigned int count;
/* spin_lock_irqsave(&i8253_lock, flags);
* Masking an LVT entry can trigger a local APIC error
* if the vector is zero. Mask LVTERR first to prevent this.
*/
if (maxlvt >= 3) {
v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
}
/*
* Careful: we have to set masks only first to deassert
* any level-triggered sources.
*/
v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
v = apic_read(APIC_LVT0);
apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
v = apic_read(APIC_LVT1);
apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
if (maxlvt >= 4) {
v = apic_read(APIC_LVTPC);
apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
}
/* lets not touch this if we didn't frob it */ outb_p(0x00, PIT_MODE);
#ifdef CONFIG_X86_MCE_P4THERMAL count = inb_p(PIT_CH0);
if (maxlvt >= 5) { count |= inb_p(PIT_CH0) << 8;
v = apic_read(APIC_LVTTHMR);
apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
}
#endif
/*
* Clean APIC state for other OSs:
*/
apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
if (maxlvt >= 3)
apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
if (maxlvt >= 4)
apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
#ifdef CONFIG_X86_MCE_P4THERMAL spin_unlock_irqrestore(&i8253_lock, flags);
if (maxlvt >= 5)
apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
#endif
v = GET_APIC_VERSION(apic_read(APIC_LVR));
if (APIC_INTEGRATED(v)) { /* !82489DX */
if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
}
}
void __init connect_bsp_APIC(void) return count;
{
if (pic_mode) {
/*
* Do not trust the local APIC being empty at bootup.
*/
clear_local_APIC();
/*
* PIC mode, enable APIC mode in the IMCR, i.e.
* connect BSP's local APIC to INT and NMI lines.
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
outb(0x70, 0x22);
outb(0x01, 0x23);
}
enable_apic_mode();
} }
void disconnect_bsp_APIC(int virt_wire_setup) /* next tick in 8254 can be caught by catching timer wraparound */
static void __devinit wait_8254_wraparound(void)
{ {
if (pic_mode) { unsigned int curr_count, prev_count;
/*
* Put the board back into PIC mode (has an effect
* only on certain older boards). Note that APIC
* interrupts, including IPIs, won't work beyond
* this point! The only exception are INIT IPIs.
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
}
else {
/* Go back to Virtual Wire compatibility mode */
unsigned long value;
/* For the spurious interrupt use vector F, and enable it */ curr_count = get_8254_timer_count();
value = apic_read(APIC_SPIV); do {
value &= ~APIC_VECTOR_MASK; prev_count = curr_count;
value |= APIC_SPIV_APIC_ENABLED; curr_count = get_8254_timer_count();
value |= 0xf;
apic_write_around(APIC_SPIV, value);
if (!virt_wire_setup) { /* workaround for broken Mercury/Neptune */
/* For LVT0 make it edge triggered, active high, external and enabled */ if (prev_count >= curr_count + 0x100)
value = apic_read(APIC_LVT0); curr_count = get_8254_timer_count();
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
apic_write_around(APIC_LVT0, value);
}
else {
/* Disable LVT0 */
apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
}
/* For LVT1 make it edge triggered, active high, nmi and enabled */ } while (prev_count >= curr_count);
value = apic_read(APIC_LVT1);
value &= ~(
APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
apic_write_around(APIC_LVT1, value);
}
} }
void disable_local_APIC(void) /*
* Default initialization for 8254 timers. If we use other timers like HPET,
* we override this later
*/
void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
/*
* This function sets up the local APIC timer, with a timeout of
* 'clocks' APIC bus clock. During calibration we actually call
* this function twice on the boot CPU, once with a bogus timeout
* value, second time for real. The other (noncalibrating) CPUs
* call this function only once, with the real, calibrated value.
*
* We do reads before writes even if unnecessary, to get around the
* P5 APIC double write bug.
*/
#define APIC_DIVISOR 16
static void __setup_APIC_LVTT(unsigned int clocks)
{ {
unsigned long value; unsigned int lvtt_value, tmp_value;
int cpu = smp_processor_id();
clear_local_APIC(); lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
if (!lapic_is_integrated())
lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
if (cpu_isset(cpu, timer_bcast_ipi))
lvtt_value |= APIC_LVT_MASKED;
apic_write_around(APIC_LVTT, lvtt_value);
/* /*
* Disable APIC (implies clearing of registers * Divide PICLK by 16
* for 82489DX!).
*/ */
value = apic_read(APIC_SPIV); tmp_value = apic_read(APIC_TDCR);
value &= ~APIC_SPIV_APIC_ENABLED; apic_write_around(APIC_TDCR, (tmp_value
apic_write_around(APIC_SPIV, value); & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
| APIC_TDR_DIV_16);
if (enabled_via_apicbase) { apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
unsigned int l, h;
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_ENABLE;
wrmsr(MSR_IA32_APICBASE, l, h);
}
} }
/* static void __devinit setup_APIC_timer(unsigned int clocks)
* This is to verify that we're looking at a real local APIC.
* Check these against your board if the CPUs aren't getting
* started for no apparent reason.
*/
int __init verify_local_APIC(void)
{ {
unsigned int reg0, reg1; unsigned long flags;
local_irq_save(flags);
/* /*
* The version register is read-only in a real APIC. * Wait for IRQ0's slice:
*/ */
reg0 = apic_read(APIC_LVR); wait_timer_tick();
apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); __setup_APIC_LVTT(clocks);
reg1 = apic_read(APIC_LVR);
apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); local_irq_restore(flags);
}
/*
* In this function we calibrate APIC bus clocks to the external
* timer. Unfortunately we cannot use jiffies and the timer irq
* to calibrate, since some later bootup code depends on getting
* the first irq? Ugh.
*
* We want to do the calibration only once since we
* want to have local timer irqs syncron. CPUs connected
* by the same APIC bus have the very same bus frequency.
* And we want to have irqs off anyways, no accidental
* APIC irq that way.
*/
static int __init calibrate_APIC_clock(void)
{
unsigned long long t1 = 0, t2 = 0;
long tt1, tt2;
long result;
int i;
const int LOOPS = HZ/10;
apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n");
/* /*
* The two version reads above should print the same * Put whatever arbitrary (but long enough) timeout
* numbers. If the second one is different, then we * value into the APIC clock, we just want to get the
* poke at a non-APIC. * counter running for calibration.
*/ */
if (reg1 != reg0) __setup_APIC_LVTT(1000000000);
return 0;
/* /*
* Check if the version looks reasonably. * The timer chip counts down to zero. Let's wait
* for a wraparound to start exact measurement:
* (the current tick might have been already half done)
*/ */
reg1 = GET_APIC_VERSION(reg0);
if (reg1 == 0x00 || reg1 == 0xff) wait_timer_tick();
return 0;
reg1 = get_maxlvt();
if (reg1 < 0x02 || reg1 == 0xff)
return 0;
/* /*
* The ID register is read/write in a real APIC. * We wrapped around just now. Let's start:
*/ */
reg0 = apic_read(APIC_ID); if (cpu_has_tsc)
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); rdtscll(t1);
tt1 = apic_read(APIC_TMCCT);
/* /*
* The next two are just to see if we have sane values. * Let's wait LOOPS wraprounds:
* They're only really relevant if we're in Virtual Wire
* compatibility mode, but most boxes are anymore.
*/ */
reg0 = apic_read(APIC_LVT0); for (i = 0; i < LOOPS; i++)
apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); wait_timer_tick();
reg1 = apic_read(APIC_LVT1);
apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
return 1; tt2 = apic_read(APIC_TMCCT);
} if (cpu_has_tsc)
rdtscll(t2);
void __init sync_Arb_IDs(void)
{
/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1
And not needed on AMD */
if (modern_apic())
return;
/* /*
* Wait for idle. * The APIC bus clock counter is 32 bits only, it
* might have overflown, but note that we use signed
* longs, thus no extra care needed.
*
* underflown to be exact, as the timer counts down ;)
*/ */
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); result = (tt1-tt2)*APIC_DIVISOR/LOOPS;
apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
| APIC_DM_INIT); if (cpu_has_tsc)
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
"%ld.%04ld MHz.\n",
((long)(t2-t1)/LOOPS)/(1000000/HZ),
((long)(t2-t1)/LOOPS)%(1000000/HZ));
apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
"%ld.%04ld MHz.\n",
result/(1000000/HZ),
result%(1000000/HZ));
return result;
} }
extern void __error_in_apic_c (void); static unsigned int calibration_result;
/* void __init setup_boot_APIC_clock(void)
* An initial setup of the virtual wire mode.
*/
void __init init_bsp_APIC(void)
{ {
unsigned long value, ver; unsigned long flags;
apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
using_apic_timer = 1;
local_irq_save(flags);
calibration_result = calibrate_APIC_clock();
/* /*
* Don't do the setup now if we have a SMP BIOS as the * Now set up the timer for real.
* through-I/O-APIC virtual wire mode might be active.
*/ */
if (smp_found_config || !cpu_has_apic) setup_APIC_timer(calibration_result);
return;
local_irq_restore(flags);
}
value = apic_read(APIC_LVR); void __devinit setup_secondary_APIC_clock(void)
ver = GET_APIC_VERSION(value); {
setup_APIC_timer(calibration_result);
}
/* void disable_APIC_timer(void)
* Do not trust the local APIC being empty at bootup. {
*/ if (using_apic_timer) {
clear_local_APIC(); unsigned long v;
/* v = apic_read(APIC_LVTT);
* Enable APIC. /*
*/ * When an illegal vector value (0-15) is written to an LVT
value = apic_read(APIC_SPIV); * entry and delivery mode is Fixed, the APIC may signal an
value &= ~APIC_VECTOR_MASK; * illegal vector error, with out regard to whether the mask
value |= APIC_SPIV_APIC_ENABLED; * bit is set or whether an interrupt is actually seen on
* input.
/* This bit is reserved on P4/Xeon and should be cleared */ *
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) * Boot sequence might call this function when the LVTT has
value &= ~APIC_SPIV_FOCUS_DISABLED; * '0' vector value. So make sure vector field is set to
else * valid value.
value |= APIC_SPIV_FOCUS_DISABLED; */
value |= SPURIOUS_APIC_VECTOR; v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
apic_write_around(APIC_SPIV, value); apic_write_around(APIC_LVTT, v);
}
}
/* void enable_APIC_timer(void)
* Set up the virtual wire mode. {
*/ int cpu = smp_processor_id();
apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI; if (using_apic_timer && !cpu_isset(cpu, timer_bcast_ipi)) {
if (!APIC_INTEGRATED(ver)) /* 82489DX */ unsigned long v;
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT1, value); v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
}
} }
void __devinit setup_local_APIC(void) void switch_APIC_timer_to_ipi(void *cpumask)
{ {
unsigned long oldvalue, value, ver, maxlvt; cpumask_t mask = *(cpumask_t *)cpumask;
int i, j; int cpu = smp_processor_id();
/* Pound the ESR really hard over the head with a big hammer - mbligh */ if (cpu_isset(cpu, mask) &&
if (esr_disable) { !cpu_isset(cpu, timer_bcast_ipi)) {
apic_write(APIC_ESR, 0); disable_APIC_timer();
apic_write(APIC_ESR, 0); cpu_set(cpu, timer_bcast_ipi);
apic_write(APIC_ESR, 0);
apic_write(APIC_ESR, 0);
} }
}
EXPORT_SYMBOL(switch_APIC_timer_to_ipi);
void switch_ipi_to_APIC_timer(void *cpumask)
{
cpumask_t mask = *(cpumask_t *)cpumask;
int cpu = smp_processor_id();
value = apic_read(APIC_LVR); if (cpu_isset(cpu, mask) &&
ver = GET_APIC_VERSION(value); cpu_isset(cpu, timer_bcast_ipi)) {
cpu_clear(cpu, timer_bcast_ipi);
enable_APIC_timer();
}
}
EXPORT_SYMBOL(switch_ipi_to_APIC_timer);
if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f) /*
__error_in_apic_c(); * Local timer interrupt handler. It does both profiling and
* process statistics/rescheduling.
*/
inline void smp_local_timer_interrupt(void)
{
profile_tick(CPU_PROFILING);
#ifdef CONFIG_SMP
update_process_times(user_mode_vm(get_irq_regs()));
#endif
/* /*
* Double-check whether this APIC is really registered. * We take the 'long' return path, and there every subsystem
* grabs the apropriate locks (kernel lock/ irq lock).
*
* we might want to decouple profiling from the 'long path',
* and do the profiling totally in assembly.
*
* Currently this isn't too much of an issue (performance wise),
* we can take more than 100K local irqs per second on a 100 MHz P5.
*/ */
if (!apic_id_registered()) }
BUG();
/*
* Local APIC timer interrupt. This is the most natural way for doing
* local interrupts, but local timer interrupts can be emulated by
* broadcast interrupts too. [in case the hw doesn't support APIC timers]
*
* [ if a single-CPU system runs an SMP kernel then we call the local
* interrupt as well. Thus we cannot inline the local irq ... ]
*/
fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
/* /*
* Intel recommends to set DFR, LDR and TPR before enabling * the NMI deadlock-detector uses this.
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/ */
init_apic_ldr(); per_cpu(irq_stat, cpu).apic_timer_irqs++;
/* /*
* Set Task Priority to 'accept all'. We never change this * NOTE! We'd better ACK the irq immediately,
* later on. * because timer handling can be slow.
*/ */
value = apic_read(APIC_TASKPRI); ack_APIC_irq();
value &= ~APIC_TPRI_MASK;
apic_write_around(APIC_TASKPRI, value);
/* /*
* After a crash, we no longer service the interrupts and a pending * update_process_times() expects us to have done irq_enter().
* interrupt from previous kernel might still have ISR bit set. * Besides, if we don't timer interrupts ignore the global
* * interrupt lock, which is the WrongThing (tm) to do.
* Most probably by now CPU has serviced that pending interrupt and
* it might not have done the ack_APIC_irq() because it thought,
* interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
* does not clear the ISR bit and cpu thinks it has already serivced
* the interrupt. Hence a vector might get locked. It was noticed
* for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
*/ */
for (i = APIC_ISR_NR - 1; i >= 0; i--) { exit_idle();
value = apic_read(APIC_ISR + i*0x10); irq_enter();
for (j = 31; j >= 0; j--) { smp_local_timer_interrupt();
if (value & (1<<j)) irq_exit();
ack_APIC_irq(); set_irq_regs(old_regs);
} }
}
/* #ifndef CONFIG_SMP
* Now that we are all set up, enable the APIC static void up_apic_timer_interrupt_call(void)
*/ {
value = apic_read(APIC_SPIV); int cpu = smp_processor_id();
value &= ~APIC_VECTOR_MASK;
/*
* Enable APIC
*/
value |= APIC_SPIV_APIC_ENABLED;
/* /*
* Some unknown Intel IO/APIC (or APIC) errata is biting us with * the NMI deadlock-detector uses this.
* certain networking cards. If high frequency interrupts are
* happening on a particular IOAPIC pin, plus the IOAPIC routing
* entry is masked/unmasked at a high rate as well then sooner or
* later IOAPIC line gets 'stuck', no more interrupts are received
* from the device. If focus CPU is disabled then the hang goes
* away, oh well :-(
*
* [ This bug can be reproduced easily with a level-triggered
* PCI Ne2000 networking cards and PII/PIII processors, dual
* BX chipset. ]
*/
/*
* Actually disabling the focus CPU check just makes the hang less
* frequent as it makes the interrupt distributon model be more
* like LRU than MRU (the short-term load is more even across CPUs).
* See also the comment in end_level_ioapic_irq(). --macro
*/ */
#if 1 per_cpu(irq_stat, cpu).apic_timer_irqs++;
/* Enable focus processor (bit==0) */
value &= ~APIC_SPIV_FOCUS_DISABLED; smp_local_timer_interrupt();
}
#endif
void smp_send_timer_broadcast_ipi(void)
{
cpumask_t mask;
cpus_and(mask, cpu_online_map, timer_bcast_ipi);
if (!cpus_empty(mask)) {
#ifdef CONFIG_SMP
send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
#else #else
/* Disable focus processor (bit==1) */ /*
value |= APIC_SPIV_FOCUS_DISABLED; * We can directly call the apic timer interrupt handler
* in UP case. Minus all irq related functions
*/
up_apic_timer_interrupt_call();
#endif #endif
/* }
* Set spurious IRQ vector }
*/
value |= SPURIOUS_APIC_VECTOR; int setup_profiling_timer(unsigned int multiplier)
apic_write_around(APIC_SPIV, value); {
return -EINVAL;
}
/*
* Local APIC start and shutdown
*/
/**
* clear_local_APIC - shutdown the local APIC
*
* This is called, when a CPU is disabled and before rebooting, so the state of
* the local APIC has no dangling leftovers. Also used to cleanout any BIOS
* leftovers during boot.
*/
void clear_local_APIC(void)
{
int maxlvt = lapic_get_maxlvt();
unsigned long v;
/* /*
* Set up LVT0, LVT1: * Masking an LVT entry can trigger a local APIC error
* * if the vector is zero. Mask LVTERR first to prevent this.
* set up through-local-APIC on the BP's LINT0. This is not
* strictly necessery in pure symmetric-IO mode, but sometimes
* we delegate interrupts to the 8259A.
*/ */
if (maxlvt >= 3) {
v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
}
/* /*
* TODO: set up through-local-APIC from through-I/O-APIC? --macro * Careful: we have to set masks only first to deassert
* any level-triggered sources.
*/ */
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; v = apic_read(APIC_LVTT);
if (!smp_processor_id() && (pic_mode || !value)) { apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
value = APIC_DM_EXTINT; v = apic_read(APIC_LVT0);
apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
smp_processor_id()); v = apic_read(APIC_LVT1);
} else { apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
value = APIC_DM_EXTINT | APIC_LVT_MASKED; if (maxlvt >= 4) {
apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", v = apic_read(APIC_LVTPC);
smp_processor_id()); apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
} }
apic_write_around(APIC_LVT0, value);
/* lets not touch this if we didn't frob it */
#ifdef CONFIG_X86_MCE_P4THERMAL
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
}
#endif
/* /*
* only the BP should see the LINT1 NMI signal, obviously. * Clean APIC state for other OSs:
*/ */
if (!smp_processor_id()) apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
value = APIC_DM_NMI; apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
else apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
value = APIC_DM_NMI | APIC_LVT_MASKED; if (maxlvt >= 3)
if (!APIC_INTEGRATED(ver)) /* 82489DX */ apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
value |= APIC_LVT_LEVEL_TRIGGER; if (maxlvt >= 4)
apic_write_around(APIC_LVT1, value); apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */
maxlvt = get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
oldvalue = apic_read(APIC_ESR);
value = ERROR_APIC_VECTOR; // enables sending errors #ifdef CONFIG_X86_MCE_P4THERMAL
apic_write_around(APIC_LVTERR, value); if (maxlvt >= 5)
/* apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
* spec says clear errors after enabling vector. #endif
*/ /* Integrated APIC (!82489DX) ? */
if (lapic_is_integrated()) {
if (maxlvt > 3) if (maxlvt > 3)
/* Clear ESR due to Pentium errata 3AP and 11AP */
apic_write(APIC_ESR, 0); apic_write(APIC_ESR, 0);
value = apic_read(APIC_ESR); apic_read(APIC_ESR);
if (value != oldvalue)
apic_printk(APIC_VERBOSE, "ESR value before enabling "
"vector: 0x%08lx after: 0x%08lx\n",
oldvalue, value);
} else {
if (esr_disable)
/*
* Something untraceble is creating bad interrupts on
* secondary quads ... for the moment, just leave the
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
*/
printk("Leaving ESR disabled.\n");
else
printk("No ESR for 82489DX.\n");
} }
}
setup_apic_nmi_watchdog(NULL); /**
apic_pm_activate(); * disable_local_APIC - clear and disable the local APIC
*/
void disable_local_APIC(void)
{
unsigned long value;
clear_local_APIC();
/*
* Disable APIC (implies clearing of registers
* for 82489DX!).
*/
value = apic_read(APIC_SPIV);
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write_around(APIC_SPIV, value);
/*
* When LAPIC was disabled by the BIOS and enabled by the kernel,
* restore the disabled state.
*/
if (enabled_via_apicbase) {
unsigned int l, h;
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_ENABLE;
wrmsr(MSR_IA32_APICBASE, l, h);
}
} }
/* /*
* If Linux enabled the LAPIC against the BIOS default * If Linux enabled the LAPIC against the BIOS default disable it down before
* disable it down before re-entering the BIOS on shutdown. * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
* Otherwise the BIOS may get confused and not power-off. * not power-off. Additionally clear all LVT entries before disable_local_APIC
* Additionally clear all LVT entries before disable_local_APIC
* for the case where Linux didn't enable the LAPIC. * for the case where Linux didn't enable the LAPIC.
*/ */
void lapic_shutdown(void) void lapic_shutdown(void)
...@@ -625,168 +631,296 @@ void lapic_shutdown(void) ...@@ -625,168 +631,296 @@ void lapic_shutdown(void)
local_irq_restore(flags); local_irq_restore(flags);
} }
#ifdef CONFIG_PM /*
* This is to verify that we're looking at a real local APIC.
static struct { * Check these against your board if the CPUs aren't getting
int active; * started for no apparent reason.
/* r/w apic fields */ */
unsigned int apic_id; int __init verify_local_APIC(void)
unsigned int apic_taskpri;
unsigned int apic_ldr;
unsigned int apic_dfr;
unsigned int apic_spiv;
unsigned int apic_lvtt;
unsigned int apic_lvtpc;
unsigned int apic_lvt0;
unsigned int apic_lvt1;
unsigned int apic_lvterr;
unsigned int apic_tmict;
unsigned int apic_tdcr;
unsigned int apic_thmr;
} apic_pm_state;
static int lapic_suspend(struct sys_device *dev, pm_message_t state)
{ {
unsigned long flags; unsigned int reg0, reg1;
int maxlvt;
if (!apic_pm_state.active) /*
* The version register is read-only in a real APIC.
*/
reg0 = apic_read(APIC_LVR);
apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
reg1 = apic_read(APIC_LVR);
apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
/*
* The two version reads above should print the same
* numbers. If the second one is different, then we
* poke at a non-APIC.
*/
if (reg1 != reg0)
return 0; return 0;
maxlvt = get_maxlvt(); /*
* Check if the version looks reasonably.
*/
reg1 = GET_APIC_VERSION(reg0);
if (reg1 == 0x00 || reg1 == 0xff)
return 0;
reg1 = lapic_get_maxlvt();
if (reg1 < 0x02 || reg1 == 0xff)
return 0;
apic_pm_state.apic_id = apic_read(APIC_ID); /*
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); * The ID register is read/write in a real APIC.
apic_pm_state.apic_ldr = apic_read(APIC_LDR); */
apic_pm_state.apic_dfr = apic_read(APIC_DFR); reg0 = apic_read(APIC_ID);
apic_pm_state.apic_spiv = apic_read(APIC_SPIV); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
if (maxlvt >= 4) /*
apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); * The next two are just to see if we have sane values.
apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); * They're only really relevant if we're in Virtual Wire
apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); * compatibility mode, but most boxes are anymore.
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); */
apic_pm_state.apic_tmict = apic_read(APIC_TMICT); reg0 = apic_read(APIC_LVT0);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
#ifdef CONFIG_X86_MCE_P4THERMAL reg1 = apic_read(APIC_LVT1);
if (maxlvt >= 5) apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif return 1;
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
return 0;
} }
static int lapic_resume(struct sys_device *dev) /**
* sync_Arb_IDs - synchronize APIC bus arbitration IDs
*/
void __init sync_Arb_IDs(void)
{ {
unsigned int l, h; /*
unsigned long flags; * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
int maxlvt; * needed on AMD.
*/
if (modern_apic())
return;
/*
* Wait for idle.
*/
apic_wait_icr_idle();
if (!apic_pm_state.active) apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
return 0; apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
| APIC_DM_INIT);
}
maxlvt = get_maxlvt(); /*
* An initial setup of the virtual wire mode.
*/
void __init init_bsp_APIC(void)
{
unsigned long value;
local_irq_save(flags); /*
* Don't do the setup now if we have a SMP BIOS as the
* through-I/O-APIC virtual wire mode might be active.
*/
if (smp_found_config || !cpu_has_apic)
return;
/* /*
* Make sure the APICBASE points to the right address * Do not trust the local APIC being empty at bootup.
*
* FIXME! This will be wrong if we ever support suspend on
* SMP! We'll need to do this as part of the CPU restore!
*/ */
rdmsr(MSR_IA32_APICBASE, l, h); clear_local_APIC();
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); /*
apic_write(APIC_ID, apic_pm_state.apic_id); * Enable APIC.
apic_write(APIC_DFR, apic_pm_state.apic_dfr); */
apic_write(APIC_LDR, apic_pm_state.apic_ldr); value = apic_read(APIC_SPIV);
apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); value &= ~APIC_VECTOR_MASK;
apic_write(APIC_SPIV, apic_pm_state.apic_spiv); value |= APIC_SPIV_APIC_ENABLED;
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); /* This bit is reserved on P4/Xeon and should be cleared */
#ifdef CONFIG_X86_MCE_P4THERMAL if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
if (maxlvt >= 5) (boot_cpu_data.x86 == 15))
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); value &= ~APIC_SPIV_FOCUS_DISABLED;
#endif else
if (maxlvt >= 4) value |= APIC_SPIV_FOCUS_DISABLED;
apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); apic_write_around(APIC_SPIV, value);
apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
apic_write(APIC_TMICT, apic_pm_state.apic_tmict); /*
apic_write(APIC_ESR, 0); * Set up the virtual wire mode.
apic_read(APIC_ESR); */
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
apic_write(APIC_ESR, 0); value = APIC_DM_NMI;
apic_read(APIC_ESR); if (!lapic_is_integrated()) /* 82489DX */
local_irq_restore(flags); value |= APIC_LVT_LEVEL_TRIGGER;
return 0; apic_write_around(APIC_LVT1, value);
} }
/* /**
* This device has no shutdown method - fully functioning local APICs * setup_local_APIC - setup the local APIC
* are needed on every CPU up until machine_halt/restart/poweroff.
*/ */
void __devinit setup_local_APIC(void)
{
unsigned long oldvalue, value, maxlvt, integrated;
int i, j;
static struct sysdev_class lapic_sysclass = { /* Pound the ESR really hard over the head with a big hammer - mbligh */
set_kset_name("lapic"), if (esr_disable) {
.resume = lapic_resume, apic_write(APIC_ESR, 0);
.suspend = lapic_suspend, apic_write(APIC_ESR, 0);
}; apic_write(APIC_ESR, 0);
apic_write(APIC_ESR, 0);
}
static struct sys_device device_lapic = { integrated = lapic_is_integrated();
.id = 0,
.cls = &lapic_sysclass,
};
static void __devinit apic_pm_activate(void) /*
{ * Double-check whether this APIC is really registered.
apic_pm_state.active = 1; */
} if (!apic_id_registered())
BUG();
static int __init init_lapic_sysfs(void) /*
{ * Intel recommends to set DFR, LDR and TPR before enabling
int error; * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
init_apic_ldr();
if (!cpu_has_apic) /*
return 0; * Set Task Priority to 'accept all'. We never change this
/* XXX: remove suspend/resume procs if !apic_pm_state.active? */ * later on.
*/
value = apic_read(APIC_TASKPRI);
value &= ~APIC_TPRI_MASK;
apic_write_around(APIC_TASKPRI, value);
error = sysdev_class_register(&lapic_sysclass); /*
if (!error) * After a crash, we no longer service the interrupts and a pending
error = sysdev_register(&device_lapic); * interrupt from previous kernel might still have ISR bit set.
return error; *
} * Most probably by now CPU has serviced that pending interrupt and
device_initcall(init_lapic_sysfs); * it might not have done the ack_APIC_irq() because it thought,
* interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
* does not clear the ISR bit and cpu thinks it has already serivced
* the interrupt. Hence a vector might get locked. It was noticed
* for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
*/
for (i = APIC_ISR_NR - 1; i >= 0; i--) {
value = apic_read(APIC_ISR + i*0x10);
for (j = 31; j >= 0; j--) {
if (value & (1<<j))
ack_APIC_irq();
}
}
#else /* CONFIG_PM */ /*
* Now that we are all set up, enable the APIC
*/
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
/*
* Enable APIC
*/
value |= APIC_SPIV_APIC_ENABLED;
static void apic_pm_activate(void) { } /*
* Some unknown Intel IO/APIC (or APIC) errata is biting us with
* certain networking cards. If high frequency interrupts are
* happening on a particular IOAPIC pin, plus the IOAPIC routing
* entry is masked/unmasked at a high rate as well then sooner or
* later IOAPIC line gets 'stuck', no more interrupts are received
* from the device. If focus CPU is disabled then the hang goes
* away, oh well :-(
*
* [ This bug can be reproduced easily with a level-triggered
* PCI Ne2000 networking cards and PII/PIII processors, dual
* BX chipset. ]
*/
/*
* Actually disabling the focus CPU check just makes the hang less
* frequent as it makes the interrupt distributon model be more
* like LRU than MRU (the short-term load is more even across CPUs).
* See also the comment in end_level_ioapic_irq(). --macro
*/
#endif /* CONFIG_PM */ /* Enable focus processor (bit==0) */
value &= ~APIC_SPIV_FOCUS_DISABLED;
/* /*
* Detect and enable local APICs on non-SMP boards. * Set spurious IRQ vector
* Original code written by Keir Fraser. */
*/ value |= SPURIOUS_APIC_VECTOR;
apic_write_around(APIC_SPIV, value);
/*
* Set up LVT0, LVT1:
*
* set up through-local-APIC on the BP's LINT0. This is not
* strictly necessery in pure symmetric-IO mode, but sometimes
* we delegate interrupts to the 8259A.
*/
/*
* TODO: set up through-local-APIC from through-I/O-APIC? --macro
*/
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
if (!smp_processor_id() && (pic_mode || !value)) {
value = APIC_DM_EXTINT;
apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
smp_processor_id());
} else {
value = APIC_DM_EXTINT | APIC_LVT_MASKED;
apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
smp_processor_id());
}
apic_write_around(APIC_LVT0, value);
/*
* only the BP should see the LINT1 NMI signal, obviously.
*/
if (!smp_processor_id())
value = APIC_DM_NMI;
else
value = APIC_DM_NMI | APIC_LVT_MASKED;
if (!integrated) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT1, value);
if (integrated && !esr_disable) { /* !82489DX */
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
oldvalue = apic_read(APIC_ESR);
/* enables sending errors */
value = ERROR_APIC_VECTOR;
apic_write_around(APIC_LVTERR, value);
/*
* spec says clear errors after enabling vector.
*/
if (maxlvt > 3)
apic_write(APIC_ESR, 0);
value = apic_read(APIC_ESR);
if (value != oldvalue)
apic_printk(APIC_VERBOSE, "ESR value before enabling "
"vector: 0x%08lx after: 0x%08lx\n",
oldvalue, value);
} else {
if (esr_disable)
/*
* Something untraceble is creating bad interrupts on
* secondary quads ... for the moment, just leave the
* ESR disabled - we can't do anything useful with the
* errors anyway - mbligh
*/
printk(KERN_INFO "Leaving ESR disabled.\n");
else
printk(KERN_INFO "No ESR for 82489DX.\n");
}
static int __init apic_set_verbosity(char *str) setup_apic_nmi_watchdog(NULL);
{ apic_pm_activate();
if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
return 1;
} }
__setup("apic=", apic_set_verbosity); /*
* Detect and initialize APIC
*/
static int __init detect_init_APIC (void) static int __init detect_init_APIC (void)
{ {
u32 h, l, features; u32 h, l, features;
...@@ -798,7 +932,7 @@ static int __init detect_init_APIC (void) ...@@ -798,7 +932,7 @@ static int __init detect_init_APIC (void)
switch (boot_cpu_data.x86_vendor) { switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD: case X86_VENDOR_AMD:
if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
(boot_cpu_data.x86 == 15)) (boot_cpu_data.x86 == 15))
break; break;
goto no_apic; goto no_apic;
case X86_VENDOR_INTEL: case X86_VENDOR_INTEL:
...@@ -812,23 +946,23 @@ static int __init detect_init_APIC (void) ...@@ -812,23 +946,23 @@ static int __init detect_init_APIC (void)
if (!cpu_has_apic) { if (!cpu_has_apic) {
/* /*
* Over-ride BIOS and try to enable the local * Over-ride BIOS and try to enable the local APIC only if
* APIC only if "lapic" specified. * "lapic" specified.
*/ */
if (enable_local_apic <= 0) { if (enable_local_apic <= 0) {
printk("Local APIC disabled by BIOS -- " printk(KERN_INFO "Local APIC disabled by BIOS -- "
"you can enable it with \"lapic\"\n"); "you can enable it with \"lapic\"\n");
return -1; return -1;
} }
/* /*
* Some BIOSes disable the local APIC in the * Some BIOSes disable the local APIC in the APIC_BASE
* APIC_BASE MSR. This can only be done in * MSR. This can only be done in software for Intel P6 or later
* software for Intel P6 or later and AMD K7 * and AMD K7 (Model > 1) or later.
* (Model > 1) or later.
*/ */
rdmsr(MSR_IA32_APICBASE, l, h); rdmsr(MSR_IA32_APICBASE, l, h);
if (!(l & MSR_IA32_APICBASE_ENABLE)) { if (!(l & MSR_IA32_APICBASE_ENABLE)) {
printk("Local APIC disabled by BIOS -- reenabling.\n"); printk(KERN_INFO
"Local APIC disabled by BIOS -- reenabling.\n");
l &= ~MSR_IA32_APICBASE_BASE; l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
wrmsr(MSR_IA32_APICBASE, l, h); wrmsr(MSR_IA32_APICBASE, l, h);
...@@ -841,7 +975,7 @@ static int __init detect_init_APIC (void) ...@@ -841,7 +975,7 @@ static int __init detect_init_APIC (void)
*/ */
features = cpuid_edx(1); features = cpuid_edx(1);
if (!(features & (1 << X86_FEATURE_APIC))) { if (!(features & (1 << X86_FEATURE_APIC))) {
printk("Could not enable APIC!\n"); printk(KERN_WARNING "Could not enable APIC!\n");
return -1; return -1;
} }
set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
...@@ -849,457 +983,167 @@ static int __init detect_init_APIC (void) ...@@ -849,457 +983,167 @@ static int __init detect_init_APIC (void)
/* The BIOS may have set up the APIC at some other address */ /* The BIOS may have set up the APIC at some other address */
rdmsr(MSR_IA32_APICBASE, l, h); rdmsr(MSR_IA32_APICBASE, l, h);
if (l & MSR_IA32_APICBASE_ENABLE) if (l & MSR_IA32_APICBASE_ENABLE)
mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
if (nmi_watchdog != NMI_NONE)
nmi_watchdog = NMI_LOCAL_APIC;
printk("Found and enabled local APIC!\n");
apic_pm_activate();
return 0;
no_apic:
printk("No local APIC present or hardware disabled\n");
return -1;
}
void __init init_apic_mappings(void)
{
unsigned long apic_phys;
/*
* If no local APIC can be found then set up a fake all
* zeroes page to simulate the local APIC and another
* one for the IO-APIC.
*/
if (!smp_found_config && detect_init_APIC()) {
apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
apic_phys = __pa(apic_phys);
} else
apic_phys = mp_lapic_addr;
set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
apic_phys);
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
if (boot_cpu_physical_apicid == -1U)
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
#ifdef CONFIG_X86_IO_APIC
{
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
int i;
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].mpc_apicaddr;
if (!ioapic_phys) {
printk(KERN_ERR
"WARNING: bogus zero IO-APIC "
"address found in MPTABLE, "
"disabling IO/APIC support!\n");
smp_found_config = 0;
skip_ioapic_setup = 1;
goto fake_ioapic_page;
}
} else {
fake_ioapic_page:
ioapic_phys = (unsigned long)
alloc_bootmem_pages(PAGE_SIZE);
ioapic_phys = __pa(ioapic_phys);
}
set_fixmap_nocache(idx, ioapic_phys);
printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
__fix_to_virt(idx), ioapic_phys);
idx++;
}
}
#endif
}
/*
* This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts
* per second. We assume that the caller has already set up the local
* APIC.
*
* The APIC timer is not exactly sync with the external timer chip, it
* closely follows bus clocks.
*/
/*
* The timer chip is already set up at HZ interrupts per second here,
* but we do not accept timer interrupts yet. We only allow the BP
* to calibrate.
*/
static unsigned int __devinit get_8254_timer_count(void)
{
unsigned long flags;
unsigned int count;
spin_lock_irqsave(&i8253_lock, flags);
outb_p(0x00, PIT_MODE);
count = inb_p(PIT_CH0);
count |= inb_p(PIT_CH0) << 8;
spin_unlock_irqrestore(&i8253_lock, flags);
return count;
}
/* next tick in 8254 can be caught by catching timer wraparound */
static void __devinit wait_8254_wraparound(void)
{
unsigned int curr_count, prev_count;
curr_count = get_8254_timer_count();
do {
prev_count = curr_count;
curr_count = get_8254_timer_count();
/* workaround for broken Mercury/Neptune */
if (prev_count >= curr_count + 0x100)
curr_count = get_8254_timer_count();
} while (prev_count >= curr_count);
}
/*
* Default initialization for 8254 timers. If we use other timers like HPET,
* we override this later
*/
void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound;
/*
* This function sets up the local APIC timer, with a timeout of
* 'clocks' APIC bus clock. During calibration we actually call
* this function twice on the boot CPU, once with a bogus timeout
* value, second time for real. The other (noncalibrating) CPUs
* call this function only once, with the real, calibrated value.
*
* We do reads before writes even if unnecessary, to get around the
* P5 APIC double write bug.
*/
#define APIC_DIVISOR 16
static void __setup_APIC_LVTT(unsigned int clocks)
{
unsigned int lvtt_value, tmp_value, ver;
int cpu = smp_processor_id();
ver = GET_APIC_VERSION(apic_read(APIC_LVR));
lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
if (!APIC_INTEGRATED(ver))
lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
if (cpu_isset(cpu, timer_bcast_ipi))
lvtt_value |= APIC_LVT_MASKED;
apic_write_around(APIC_LVTT, lvtt_value);
/*
* Divide PICLK by 16
*/
tmp_value = apic_read(APIC_TDCR);
apic_write_around(APIC_TDCR, (tmp_value
& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
| APIC_TDR_DIV_16);
apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
}
static void __devinit setup_APIC_timer(unsigned int clocks)
{
unsigned long flags;
local_irq_save(flags);
/*
* Wait for IRQ0's slice:
*/
wait_timer_tick();
__setup_APIC_LVTT(clocks);
local_irq_restore(flags);
}
/*
* In this function we calibrate APIC bus clocks to the external
* timer. Unfortunately we cannot use jiffies and the timer irq
* to calibrate, since some later bootup code depends on getting
* the first irq? Ugh.
*
* We want to do the calibration only once since we
* want to have local timer irqs syncron. CPUs connected
* by the same APIC bus have the very same bus frequency.
* And we want to have irqs off anyways, no accidental
* APIC irq that way.
*/
static int __init calibrate_APIC_clock(void)
{
unsigned long long t1 = 0, t2 = 0;
long tt1, tt2;
long result;
int i;
const int LOOPS = HZ/10;
apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n");
/*
* Put whatever arbitrary (but long enough) timeout
* value into the APIC clock, we just want to get the
* counter running for calibration.
*/
__setup_APIC_LVTT(1000000000);
/*
* The timer chip counts down to zero. Let's wait
* for a wraparound to start exact measurement:
* (the current tick might have been already half done)
*/
wait_timer_tick();
/*
* We wrapped around just now. Let's start:
*/
if (cpu_has_tsc)
rdtscll(t1);
tt1 = apic_read(APIC_TMCCT);
/*
* Let's wait LOOPS wraprounds:
*/
for (i = 0; i < LOOPS; i++)
wait_timer_tick();
tt2 = apic_read(APIC_TMCCT);
if (cpu_has_tsc)
rdtscll(t2);
/*
* The APIC bus clock counter is 32 bits only, it
* might have overflown, but note that we use signed
* longs, thus no extra care needed.
*
* underflown to be exact, as the timer counts down ;)
*/
result = (tt1-tt2)*APIC_DIVISOR/LOOPS; if (nmi_watchdog != NMI_NONE)
nmi_watchdog = NMI_LOCAL_APIC;
if (cpu_has_tsc) printk(KERN_INFO "Found and enabled local APIC!\n");
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
"%ld.%04ld MHz.\n",
((long)(t2-t1)/LOOPS)/(1000000/HZ),
((long)(t2-t1)/LOOPS)%(1000000/HZ));
apic_printk(APIC_VERBOSE, "..... host bus clock speed is " apic_pm_activate();
"%ld.%04ld MHz.\n",
result/(1000000/HZ),
result%(1000000/HZ));
return result; return 0;
}
static unsigned int calibration_result; no_apic:
printk(KERN_INFO "No local APIC present or hardware disabled\n");
return -1;
}
void __init setup_boot_APIC_clock(void) /**
* init_apic_mappings - initialize APIC mappings
*/
void __init init_apic_mappings(void)
{ {
unsigned long flags; unsigned long apic_phys;
apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
using_apic_timer = 1;
local_irq_save(flags);
calibration_result = calibrate_APIC_clock();
/* /*
* Now set up the timer for real. * If no local APIC can be found then set up a fake all
* zeroes page to simulate the local APIC and another
* one for the IO-APIC.
*/ */
setup_APIC_timer(calibration_result); if (!smp_found_config && detect_init_APIC()) {
apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
apic_phys = __pa(apic_phys);
} else
apic_phys = mp_lapic_addr;
local_irq_restore(flags); set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
} printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
apic_phys);
void __devinit setup_secondary_APIC_clock(void) /*
{ * Fetch the APIC ID of the BSP in case we have a
setup_APIC_timer(calibration_result); * default configuration (or the MP table is broken).
} */
if (boot_cpu_physical_apicid == -1U)
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
void disable_APIC_timer(void) #ifdef CONFIG_X86_IO_APIC
{ {
if (using_apic_timer) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
unsigned long v; int i;
v = apic_read(APIC_LVTT); for (i = 0; i < nr_ioapics; i++) {
/* if (smp_found_config) {
* When an illegal vector value (0-15) is written to an LVT ioapic_phys = mp_ioapics[i].mpc_apicaddr;
* entry and delivery mode is Fixed, the APIC may signal an if (!ioapic_phys) {
* illegal vector error, with out regard to whether the mask printk(KERN_ERR
* bit is set or whether an interrupt is actually seen on input. "WARNING: bogus zero IO-APIC "
* "address found in MPTABLE, "
* Boot sequence might call this function when the LVTT has "disabling IO/APIC support!\n");
* '0' vector value. So make sure vector field is set to smp_found_config = 0;
* valid value. skip_ioapic_setup = 1;
*/ goto fake_ioapic_page;
v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); }
apic_write_around(APIC_LVTT, v); } else {
fake_ioapic_page:
ioapic_phys = (unsigned long)
alloc_bootmem_pages(PAGE_SIZE);
ioapic_phys = __pa(ioapic_phys);
}
set_fixmap_nocache(idx, ioapic_phys);
printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
__fix_to_virt(idx), ioapic_phys);
idx++;
}
} }
#endif
} }
void enable_APIC_timer(void) /*
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
int __init APIC_init_uniprocessor (void)
{ {
int cpu = smp_processor_id(); if (enable_local_apic < 0)
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
if (using_apic_timer &&
!cpu_isset(cpu, timer_bcast_ipi)) {
unsigned long v;
v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
}
}
void switch_APIC_timer_to_ipi(void *cpumask) if (!smp_found_config && !cpu_has_apic)
{ return -1;
cpumask_t mask = *(cpumask_t *)cpumask;
int cpu = smp_processor_id();
if (cpu_isset(cpu, mask) && /*
!cpu_isset(cpu, timer_bcast_ipi)) { * Complain if the BIOS pretends there is one.
disable_APIC_timer(); */
cpu_set(cpu, timer_bcast_ipi); if (!cpu_has_apic &&
APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
return -1;
} }
}
EXPORT_SYMBOL(switch_APIC_timer_to_ipi);
void switch_ipi_to_APIC_timer(void *cpumask) verify_local_APIC();
{
cpumask_t mask = *(cpumask_t *)cpumask;
int cpu = smp_processor_id();
if (cpu_isset(cpu, mask) && connect_bsp_APIC();
cpu_isset(cpu, timer_bcast_ipi)) {
cpu_clear(cpu, timer_bcast_ipi);
enable_APIC_timer();
}
}
EXPORT_SYMBOL(switch_ipi_to_APIC_timer);
#undef APIC_DIVISOR /*
* Hack: In case of kdump, after a crash, kernel might be booting
* on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
* might be zero if read from MP tables. Get it from LAPIC.
*/
#ifdef CONFIG_CRASH_DUMP
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
#endif
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
/* setup_local_APIC();
* Local timer interrupt handler. It does both profiling and
* process statistics/rescheduling.
*
* We do profiling in every local tick, statistics/rescheduling
* happen only every 'profiling multiplier' ticks. The default
* multiplier is 1 and it can be changed by writing the new multiplier
* value into /proc/profile.
*/
inline void smp_local_timer_interrupt(void) #ifdef CONFIG_X86_IO_APIC
{ if (smp_found_config)
profile_tick(CPU_PROFILING); if (!skip_ioapic_setup && nr_ioapics)
#ifdef CONFIG_SMP setup_IO_APIC();
update_process_times(user_mode_vm(get_irq_regs()));
#endif #endif
setup_boot_clock();
/* return 0;
* We take the 'long' return path, and there every subsystem
* grabs the apropriate locks (kernel lock/ irq lock).
*
* we might want to decouple profiling from the 'long path',
* and do the profiling totally in assembly.
*
* Currently this isn't too much of an issue (performance wise),
* we can take more than 100K local irqs per second on a 100 MHz P5.
*/
} }
/* /*
* Local APIC timer interrupt. This is the most natural way for doing * APIC command line parameters
* local interrupts, but local timer interrupts can be emulated by
* broadcast interrupts too. [in case the hw doesn't support APIC timers]
*
* [ if a single-CPU system runs an SMP kernel then we call the local
* interrupt as well. Thus we cannot inline the local irq ... ]
*/ */
static int __init parse_lapic(char *arg)
fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
/*
* the NMI deadlock-detector uses this.
*/
per_cpu(irq_stat, cpu).apic_timer_irqs++;
/*
* NOTE! We'd better ACK the irq immediately,
* because timer handling can be slow.
*/
ack_APIC_irq();
/*
* update_process_times() expects us to have done irq_enter().
* Besides, if we don't timer interrupts ignore the global
* interrupt lock, which is the WrongThing (tm) to do.
*/
exit_idle();
irq_enter();
smp_local_timer_interrupt();
irq_exit();
set_irq_regs(old_regs);
}
#ifndef CONFIG_SMP
static void up_apic_timer_interrupt_call(void)
{ {
int cpu = smp_processor_id(); enable_local_apic = 1;
return 0;
/*
* the NMI deadlock-detector uses this.
*/
per_cpu(irq_stat, cpu).apic_timer_irqs++;
smp_local_timer_interrupt();
} }
#endif early_param("lapic", parse_lapic);
void smp_send_timer_broadcast_ipi(void) static int __init parse_nolapic(char *arg)
{ {
cpumask_t mask; enable_local_apic = -1;
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
cpus_and(mask, cpu_online_map, timer_bcast_ipi); return 0;
if (!cpus_empty(mask)) {
#ifdef CONFIG_SMP
send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
#else
/*
* We can directly call the apic timer interrupt handler
* in UP case. Minus all irq related functions
*/
up_apic_timer_interrupt_call();
#endif
}
} }
early_param("nolapic", parse_nolapic);
int setup_profiling_timer(unsigned int multiplier) static int __init apic_set_verbosity(char *str)
{ {
return -EINVAL; if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
return 1;
} }
__setup("apic=", apic_set_verbosity);
/*
* Local APIC interrupts
*/
/* /*
* This interrupt should _never_ happen with our APIC/SMP architecture * This interrupt should _never_ happen with our APIC/SMP architecture
*/ */
...@@ -1319,15 +1163,14 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) ...@@ -1319,15 +1163,14 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs)
ack_APIC_irq(); ack_APIC_irq();
/* see sw-dev-man vol 3, chapter 7.4.13.5 */ /* see sw-dev-man vol 3, chapter 7.4.13.5 */
printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n", printk(KERN_INFO "spurious APIC interrupt on CPU#%d, "
smp_processor_id()); "should never happen.\n", smp_processor_id());
irq_exit(); irq_exit();
} }
/* /*
* This interrupt should never happen with our APIC/SMP architecture * This interrupt should never happen with our APIC/SMP architecture
*/ */
fastcall void smp_error_interrupt(struct pt_regs *regs) fastcall void smp_error_interrupt(struct pt_regs *regs)
{ {
unsigned long v, v1; unsigned long v, v1;
...@@ -1352,69 +1195,261 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) ...@@ -1352,69 +1195,261 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
7: Illegal register address 7: Illegal register address
*/ */
printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
smp_processor_id(), v , v1); smp_processor_id(), v , v1);
irq_exit(); irq_exit();
} }
/* /*
* This initializes the IO-APIC and APIC hardware if this is * Initialize APIC interrupts
* a UP kernel.
*/ */
int __init APIC_init_uniprocessor (void) void __init apic_intr_init(void)
{ {
if (enable_local_apic < 0) #ifdef CONFIG_SMP
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); smp_intr_init();
#endif
/* self generated IPI for local APIC timer */
set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
if (!smp_found_config && !cpu_has_apic) /* IPI vectors for APIC spurious and error interrupts */
return -1; set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* /* thermal monitor LVT interrupt */
* Complain if the BIOS pretends there is one. #ifdef CONFIG_X86_MCE_P4THERMAL
*/ set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { #endif
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", }
boot_cpu_physical_apicid);
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); /**
return -1; * connect_bsp_APIC - attach the APIC to the interrupt system
*/
void __init connect_bsp_APIC(void)
{
if (pic_mode) {
/*
* Do not trust the local APIC being empty at bootup.
*/
clear_local_APIC();
/*
* PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
* local APIC to INT and NMI lines.
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
outb(0x70, 0x22);
outb(0x01, 0x23);
} }
enable_apic_mode();
}
verify_local_APIC(); /**
* disconnect_bsp_APIC - detach the APIC from the interrupt system
* @virt_wire_setup: indicates, whether virtual wire mode is selected
*
* Virtual wire mode is necessary to deliver legacy interrupts even when the
* APIC is disabled.
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
if (pic_mode) {
/*
* Put the board back into PIC mode (has an effect only on
* certain older boards). Note that APIC interrupts, including
* IPIs, won't work beyond this point! The only exception are
* INIT IPIs.
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
} else {
/* Go back to Virtual Wire compatibility mode */
unsigned long value;
connect_bsp_APIC(); /* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
value |= 0xf;
apic_write_around(APIC_SPIV, value);
/* if (!virt_wire_setup) {
* Hack: In case of kdump, after a crash, kernel might be booting /*
* on a cpu with non-zero lapic id. But boot_cpu_physical_apicid * For LVT0 make it edge triggered, active high,
* might be zero if read from MP tables. Get it from LAPIC. * external and enabled
*/ */
#ifdef CONFIG_CRASH_DUMP value = apic_read(APIC_LVT0);
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
#endif APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
apic_write_around(APIC_LVT0, value);
} else {
/* Disable LVT0 */
apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
}
setup_local_APIC(); /*
* For LVT1 make it edge triggered, active high, nmi and
* enabled
*/
value = apic_read(APIC_LVT1);
value &= ~(
APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
apic_write_around(APIC_LVT1, value);
}
}
#ifdef CONFIG_X86_IO_APIC /*
if (smp_found_config) * Power management
if (!skip_ioapic_setup && nr_ioapics) */
setup_IO_APIC(); #ifdef CONFIG_PM
static struct {
int active;
/* r/w apic fields */
unsigned int apic_id;
unsigned int apic_taskpri;
unsigned int apic_ldr;
unsigned int apic_dfr;
unsigned int apic_spiv;
unsigned int apic_lvtt;
unsigned int apic_lvtpc;
unsigned int apic_lvt0;
unsigned int apic_lvt1;
unsigned int apic_lvterr;
unsigned int apic_tmict;
unsigned int apic_tdcr;
unsigned int apic_thmr;
} apic_pm_state;
static int lapic_suspend(struct sys_device *dev, pm_message_t state)
{
unsigned long flags;
int maxlvt;
if (!apic_pm_state.active)
return 0;
maxlvt = lapic_get_maxlvt();
apic_pm_state.apic_id = apic_read(APIC_ID);
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
if (maxlvt >= 4)
apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
#ifdef CONFIG_X86_MCE_P4THERMAL
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif #endif
setup_boot_clock();
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
return 0; return 0;
} }
static int __init parse_lapic(char *arg) static int lapic_resume(struct sys_device *dev)
{ {
lapic_enable(); unsigned int l, h;
unsigned long flags;
int maxlvt;
if (!apic_pm_state.active)
return 0;
maxlvt = lapic_get_maxlvt();
local_irq_save(flags);
/*
* Make sure the APICBASE points to the right address
*
* FIXME! This will be wrong if we ever support suspend on
* SMP! We'll need to do this as part of the CPU restore!
*/
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
apic_write(APIC_DFR, apic_pm_state.apic_dfr);
apic_write(APIC_LDR, apic_pm_state.apic_ldr);
apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
#ifdef CONFIG_X86_MCE_P4THERMAL
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
if (maxlvt >= 4)
apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
local_irq_restore(flags);
return 0; return 0;
} }
early_param("lapic", parse_lapic);
static int __init parse_nolapic(char *arg) /*
* This device has no shutdown method - fully functioning local APICs
* are needed on every CPU up until machine_halt/restart/poweroff.
*/
static struct sysdev_class lapic_sysclass = {
set_kset_name("lapic"),
.resume = lapic_resume,
.suspend = lapic_suspend,
};
static struct sys_device device_lapic = {
.id = 0,
.cls = &lapic_sysclass,
};
static void __devinit apic_pm_activate(void)
{ {
lapic_disable(); apic_pm_state.active = 1;
return 0;
} }
early_param("nolapic", parse_nolapic);
static int __init init_lapic_sysfs(void)
{
int error;
if (!cpu_has_apic)
return 0;
/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
error = sysdev_class_register(&lapic_sysclass);
if (!error)
error = sysdev_register(&device_lapic);
return error;
}
device_initcall(init_lapic_sysfs);
#else /* CONFIG_PM */
static void apic_pm_activate(void) { }
#endif /* CONFIG_PM */
...@@ -1588,7 +1588,7 @@ void /*__init*/ print_local_APIC(void * dummy) ...@@ -1588,7 +1588,7 @@ void /*__init*/ print_local_APIC(void * dummy)
v = apic_read(APIC_LVR); v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v); printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v); ver = GET_APIC_VERSION(v);
maxlvt = get_maxlvt(); maxlvt = lapic_get_maxlvt();
v = apic_read(APIC_TASKPRI); v = apic_read(APIC_TASKPRI);
printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
......
...@@ -10,7 +10,6 @@ ...@@ -10,7 +10,6 @@
* io_apic.c.) * io_apic.c.)
*/ */
#include <asm/uaccess.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/seq_file.h> #include <linux/seq_file.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
...@@ -21,19 +20,34 @@ ...@@ -21,19 +20,34 @@
#include <asm/idle.h> #include <asm/idle.h>
#include <asm/apic.h>
#include <asm/uaccess.h>
DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
EXPORT_PER_CPU_SYMBOL(irq_stat); EXPORT_PER_CPU_SYMBOL(irq_stat);
#ifndef CONFIG_X86_LOCAL_APIC
/* /*
* 'what should we do if we get a hw irq event on an illegal vector'. * 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves. * each architecture has to answer this themselves.
*/ */
void ack_bad_irq(unsigned int irq) void ack_bad_irq(unsigned int irq)
{ {
printk("unexpected IRQ trap at vector %02x\n", irq); printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
}
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Currently unexpected vectors happen only on SMP and APIC.
* We _must_ ack these because every local APIC has only N
* irq slots per priority level, and a 'hanging, unacked' IRQ
* holds up an irq slot - in excessive cases (when multiple
* unexpected vectors occur) that might lock up the APIC
* completely.
* But only ack when the APIC is enabled -AK
*/
if (cpu_has_apic)
ack_APIC_irq();
#endif #endif
}
#ifdef CONFIG_4KSTACKS #ifdef CONFIG_4KSTACKS
/* /*
......
...@@ -600,7 +600,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) ...@@ -600,7 +600,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
/* /*
* Due to the Pentium erratum 3AP. * Due to the Pentium erratum 3AP.
*/ */
maxlvt = get_maxlvt(); maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) { if (maxlvt > 3) {
apic_read_around(APIC_SPIV); apic_read_around(APIC_SPIV);
apic_write(APIC_ESR, 0); apic_write(APIC_ESR, 0);
...@@ -697,7 +697,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) ...@@ -697,7 +697,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
*/ */
Dprintk("#startup loops: %d.\n", num_starts); Dprintk("#startup loops: %d.\n", num_starts);
maxlvt = get_maxlvt(); maxlvt = lapic_get_maxlvt();
for (j = 1; j <= num_starts; j++) { for (j = 1; j <= num_starts; j++) {
Dprintk("Sending STARTUP #%d.\n",j); Dprintk("Sending STARTUP #%d.\n",j);
......
...@@ -97,7 +97,7 @@ static inline void ack_APIC_irq(void) ...@@ -97,7 +97,7 @@ static inline void ack_APIC_irq(void)
extern void (*wait_timer_tick)(void); extern void (*wait_timer_tick)(void);
extern int get_maxlvt(void); extern int lapic_get_maxlvt(void);
extern void clear_local_APIC(void); extern void clear_local_APIC(void);
extern void connect_bsp_APIC (void); extern void connect_bsp_APIC (void);
extern void disconnect_bsp_APIC (int virt_wire_setup); extern void disconnect_bsp_APIC (int virt_wire_setup);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment