Commit e08015e7 authored by Linus Walleij's avatar Linus Walleij

drm/pl111: Support Nomadik LCDC variant

The Nomadik has a variant of the PL110 known as "Color LCD
Controller" LCDC. This variant has the same bit ordering as
the DRM subsystem (in difference from the other variants)
and adds a few bits for the control of 5551, 565 etc in the
control register. Notably it also adds a packed RGB888
24BPP mode.

We add support by detecting this variant and also adding a
small plug-in that will mux the LCDC out if the ASIC happens
to be muxed to the other graphics controller (they are
mutually exclusive).
Reviewed-by: default avatarEric Anholt <eric@anholt.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621184450.25377-1-linus.walleij@linaro.org
parent 491657a9
......@@ -4,6 +4,7 @@ pl111_drm-y += pl111_display.o \
pl111_drv.o
pl111_drm-$(CONFIG_ARCH_VEXPRESS) += pl111_vexpress.o
pl111_drm-$(CONFIG_ARCH_NOMADIK) += pl111_nomadik.o
pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o
obj-$(CONFIG_DRM_PL111) += pl111_drm.o
......@@ -223,48 +223,84 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
/* Hard-code TFT panel */
cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDVCOMP(1);
/* On the ST Micro variant, assume all 24 bits are connected */
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_CDWID_24;
/* Note that the the hardware's format reader takes 'r' from
/*
* Note that the the ARM hardware's format reader takes 'r' from
* the low bit, while DRM formats list channels from high bit
* to low bit as you read left to right.
* to low bit as you read left to right. The ST Micro version of
* the PL110 (LCDC) however uses the standard DRM format.
*/
switch (fb->format->format) {
case DRM_FORMAT_BGR888:
/* Only supported on the ST Micro variant */
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_LCDBPP24_PACKED | CNTL_BGR;
break;
case DRM_FORMAT_RGB888:
/* Only supported on the ST Micro variant */
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_LCDBPP24_PACKED;
break;
case DRM_FORMAT_ABGR8888:
case DRM_FORMAT_XBGR8888:
if (priv->variant->st_bitmux_control)
cntl |= CNTL_LCDBPP24 | CNTL_BGR;
else
cntl |= CNTL_LCDBPP24;
break;
case DRM_FORMAT_ARGB8888:
case DRM_FORMAT_XRGB8888:
if (priv->variant->st_bitmux_control)
cntl |= CNTL_LCDBPP24;
else
cntl |= CNTL_LCDBPP24 | CNTL_BGR;
break;
case DRM_FORMAT_BGR565:
if (priv->variant->is_pl110)
cntl |= CNTL_LCDBPP16;
else if (priv->variant->st_bitmux_control)
cntl |= CNTL_LCDBPP16 | CNTL_ST_1XBPP_565 | CNTL_BGR;
else
cntl |= CNTL_LCDBPP16_565;
break;
case DRM_FORMAT_RGB565:
if (priv->variant->is_pl110)
cntl |= CNTL_LCDBPP16;
cntl |= CNTL_LCDBPP16 | CNTL_BGR;
else if (priv->variant->st_bitmux_control)
cntl |= CNTL_LCDBPP16 | CNTL_ST_1XBPP_565;
else
cntl |= CNTL_LCDBPP16_565;
cntl |= CNTL_BGR;
cntl |= CNTL_LCDBPP16_565 | CNTL_BGR;
break;
case DRM_FORMAT_ABGR1555:
case DRM_FORMAT_XBGR1555:
cntl |= CNTL_LCDBPP16;
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_1XBPP_5551 | CNTL_BGR;
break;
case DRM_FORMAT_ARGB1555:
case DRM_FORMAT_XRGB1555:
cntl |= CNTL_LCDBPP16 | CNTL_BGR;
cntl |= CNTL_LCDBPP16;
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_1XBPP_5551;
else
cntl |= CNTL_BGR;
break;
case DRM_FORMAT_ABGR4444:
case DRM_FORMAT_XBGR4444:
cntl |= CNTL_LCDBPP16_444;
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_1XBPP_444 | CNTL_BGR;
break;
case DRM_FORMAT_ARGB4444:
case DRM_FORMAT_XRGB4444:
cntl |= CNTL_LCDBPP16_444 | CNTL_BGR;
cntl |= CNTL_LCDBPP16_444;
if (priv->variant->st_bitmux_control)
cntl |= CNTL_ST_1XBPP_444;
else
cntl |= CNTL_BGR;
break;
default:
WARN_ONCE(true, "Unknown FB format 0x%08x\n",
......
......@@ -36,11 +36,14 @@ struct drm_minor;
* struct pl111_variant_data - encodes IP differences
* @name: the name of this variant
* @is_pl110: this is the early PL110 variant
* @is_lcdc: this is the ST Microelectronics Nomadik LCDC variant
* @external_bgr: this is the Versatile Pl110 variant with external
* BGR/RGB routing
* @broken_clockdivider: the clock divider is broken and we need to
* use the supplied clock directly
* @broken_vblank: the vblank IRQ is broken on this variant
* @st_bitmux_control: this variant is using the ST Micro bitmux
* extensions to the control register
* @formats: array of supported pixel formats on this variant
* @nformats: the length of the array of supported pixel formats
* @fb_bpp: desired bits per pixel on the default framebuffer
......@@ -48,9 +51,11 @@ struct drm_minor;
struct pl111_variant_data {
const char *name;
bool is_pl110;
bool is_lcdc;
bool external_bgr;
bool broken_clockdivider;
bool broken_vblank;
bool st_bitmux_control;
const u32 *formats;
unsigned int nformats;
unsigned int fb_bpp;
......
......@@ -75,6 +75,7 @@
#include "pl111_drm.h"
#include "pl111_versatile.h"
#include "pl111_nomadik.h"
#define DRIVER_DESC "DRM module for PL111"
......@@ -288,8 +289,8 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
priv->memory_bw = 0;
}
/* The two variants swap this register */
if (variant->is_pl110) {
/* The two main variants swap this register */
if (variant->is_pl110 || variant->is_lcdc) {
priv->ienb = CLCD_PL110_IENB;
priv->ctrl = CLCD_PL110_CNTL;
} else {
......@@ -308,6 +309,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
ret = pl111_versatile_init(dev, priv);
if (ret)
goto dev_unref;
pl111_nomadik_init(dev);
/* turn off interrupts before requesting the irq */
writel(0, priv->regs + priv->ienb);
......@@ -400,16 +402,50 @@ static const struct pl111_variant_data pl111_variant = {
.fb_bpp = 32,
};
static const u32 pl110_nomadik_pixel_formats[] = {
DRM_FORMAT_RGB888,
DRM_FORMAT_BGR888,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_BGR565,
DRM_FORMAT_RGB565,
DRM_FORMAT_ABGR1555,
DRM_FORMAT_XBGR1555,
DRM_FORMAT_ARGB1555,
DRM_FORMAT_XRGB1555,
DRM_FORMAT_ABGR4444,
DRM_FORMAT_XBGR4444,
DRM_FORMAT_ARGB4444,
DRM_FORMAT_XRGB4444,
};
static const struct pl111_variant_data pl110_nomadik_variant = {
.name = "LCDC (PL110 Nomadik)",
.formats = pl110_nomadik_pixel_formats,
.nformats = ARRAY_SIZE(pl110_nomadik_pixel_formats),
.is_lcdc = true,
.st_bitmux_control = true,
.broken_vblank = true,
.fb_bpp = 16,
};
static const struct amba_id pl111_id_table[] = {
{
.id = 0x00041110,
.mask = 0x000fffff,
.data = (void*)&pl110_variant,
.data = (void *)&pl110_variant,
},
{
.id = 0x00180110,
.mask = 0x00fffffe,
.data = (void *)&pl110_nomadik_variant,
},
{
.id = 0x00041111,
.mask = 0x000fffff,
.data = (void*)&pl111_variant,
.data = (void *)&pl111_variant,
},
{0, 0},
};
......
// SPDX-License-Identifier: GPL-2.0+
#include <linux/device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include "pl111_nomadik.h"
#define PMU_CTRL_OFFSET 0x0000
#define PMU_CTRL_LCDNDIF BIT(26)
void pl111_nomadik_init(struct device *dev)
{
struct regmap *pmu_regmap;
/*
* Just bail out of this is not found, we could be running
* multiplatform on something else than Nomadik.
*/
pmu_regmap =
syscon_regmap_lookup_by_compatible("stericsson,nomadik-pmu");
if (IS_ERR(pmu_regmap))
return;
/*
* This bit in the PMU controller multiplexes the two graphics
* blocks found in the Nomadik STn8815. The other one is called
* MDIF (Master Display Interface) and gets muxed out here.
*/
regmap_update_bits(pmu_regmap,
PMU_CTRL_OFFSET,
PMU_CTRL_LCDNDIF,
0);
dev_info(dev, "set Nomadik PMU mux to CLCD mode\n");
}
EXPORT_SYMBOL_GPL(pl111_nomadik_init);
// SPDX-License-Identifier: GPL-2.0+
#include <linux/device.h>
#ifndef PL111_NOMADIK_H
#define PL111_NOMADIK_H
#endif
#ifdef CONFIG_ARCH_NOMADIK
void pl111_nomadik_init(struct device *dev);
#else
static inline void pl111_nomadik_init(struct device *dev)
{
}
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment