Commit e0970dce authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://bk.arm.linux.org.uk

into home.transmeta.com:/home/torvalds/v2.5/linux
parents 6e8b5dcf 4c515af5
Board Overview
-----------------------------
This is an beta release of the Xscale Linux port to the ADI 80200EVB
evaluation board.
The 80200EVB is an evaluation platform for ADI Engineering's high-performance
80200FCC chipset for the Intel 80200 XScale CPU. The 80200FCC is an open
source FPGA based system that contains a PCI unit and a high performance
memory controller.
In addition to the 80200FCC, the board also contains a 16C550 UART, and 4MB
of flash.
The board is still under development and currently only the UART is functional
as the PCI bits have not been programmed into the FPGA.
For more information on the board, see http://www.adiengineering.com
Port Status
-----------------------------
Supported:
- Onboard UART (Polled operation only)
- Cache/TLB locking on 80200 CPU
TODO:
- PCI when hardware supports it
Building the Kernel
-----------------------------
change Linux makefile
make adi_evb_config
make oldconfig
make dep
make zImage
Loading Linux
-----------------------------
Before you can use Linux on the ADI board, you need to grab the following:
ADI 80200EVB Monitor:
ftp://source.mvista.com/pub/xscale/ADI_EVB/monitor.srec
ADI JFFS2 Image:
ftp://source.mvista.com/pub/xscale/ADI_EVB/adi.jffs2
Once you've got the Cygnus prompt, type in the following command:
load
On another terminal window:
cat monitor.srec > /dev/ttyS0
(replace ttyS0 with the serial port you are using)
Once completed, just type 'go' at the cygmon prompt and you should see:
MontaVista IQ80310 Monitor Version 0.1
monitor>
Type 'b 115200' at the prompt and change your terminal speed to 115200
The first thing to do is to upload and burn the jffs2 filesystem image
onto the boards 4MB of flash:
monitor> u c1000000
Uploading file at 0xc1000000
Now send file with ymodem
Do as the monitor says and transfer the file adi.jffs2. Once complete,
the following will copy the jffs2 image to location 0x80000 in the flash.
monitor> f 8000 c1000000 200000
Erasing sector 0x00080000
Writing sector 0x00080000 with data at 0xC1000000
Erasing sector 0x000A0000
Writing sector 0x000A0000 with data at 0xC1020000
Erasing sector 0x000C0000
...
Now use the same command as above to upload your zImage to location c1000000.
When you've done that, type 'j c1000000' to run Linux. Login as
root and you're all set to go.
Misc Notes
-----------------------------
The current version of the HW does not have an onboard timer, so the 80200
PMU is not available for general use as it is being used for a timer source.
By default, the MTD driver reserves the first 512K for bootloaders and
the remaining 3.5MB for the filesystem. You can edit drivers/mtd/map/adi_evb.c
to change this as needed for your application.
Contributors
-----------------------------
Thanks to ADI Engineering for providing the hardware for development
Deepak Saxena <dsaxena@mvista.com> - Initial port
-----------------------------
Enjoy. If you have any problem please contact Deepak Saxena
dsaxena@mvista.com
This diff is collapsed.
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
# Copyright (C) 1995-2001 by Russell King # Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p -X LDFLAGS_vmlinux :=-p -X
AFLAGS_vmlinux.lds.o = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9 GZFLAGS :=-9
#CFLAGS +=-pipe #CFLAGS +=-pipe
...@@ -50,18 +51,29 @@ tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 ...@@ -50,18 +51,29 @@ tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) :=-mtune=strongarm #-mtune=xscale tune-$(CONFIG_CPU_XSCALE) :=-mtune=strongarm #-mtune=xscale
CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float # Force -mno-fpu to be passed to the assembler. Some versions of gcc don't
CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float # do this with -msoft-float
AFLAGS +=$(apcs-y) $(arch-y) -mno-fpu -msoft-float CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu
CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu
AFLAGS +=$(apcs-y) $(arch-y) -mno-fpu -msoft-float -Wa,-mno-fpu
ifeq ($(CONFIG_CPU_26),y) ifeq ($(CONFIG_CPU_26),y)
PROCESSOR := armo PROCESSOR := armo
HEAD := arch/arm/mach-arc/head.o arch/arm/kernel/init_task.o HEAD := arch/arm/mach-arc/head.o arch/arm/kernel/init_task.o
ifeq ($(CONFIG_ROM_KERNEL),y)
DATAADDR = 0x02080000
TEXTADDR = 0x03800000
LDSCRIPT = arch/arm/vmlinux-armo-rom.lds.in
else
TEXTADDR = 0x02080000
LDSCRIPT = arch/arm/vmlinux-armo.lds.in
endif
endif endif
ifeq ($(CONFIG_CPU_32),y) ifeq ($(CONFIG_CPU_32),y)
PROCESSOR = armv PROCESSOR = armv
HEAD := arch/arm/kernel/head.o arch/arm/kernel/init_task.o HEAD := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
TEXTADDR = 0xC0008000
endif endif
ifeq ($(CONFIG_ARCH_ARCA5K),y) ifeq ($(CONFIG_ARCH_ARCA5K),y)
...@@ -175,7 +187,7 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ ...@@ -175,7 +187,7 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200)) += drivers/acorn/char/ drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
libs-y += arch/arm/lib/ libs-y += arch/arm/lib/
......
...@@ -18,7 +18,7 @@ ZLDFLAGS = -p -X -T vmlinux.lds ...@@ -18,7 +18,7 @@ ZLDFLAGS = -p -X -T vmlinux.lds
# #
ifeq ($(CONFIG_ARCH_ACORN),y) ifeq ($(CONFIG_ARCH_ACORN),y)
OBJS += ll_char_wr.o font.o OBJS += ll_char_wr.o font.o
ZLDFLAGS += -defsym params=$(PARAMS_PHYS) CFLAGS += -DPARAMS_PHYS=$(PARAMS_PHYS)
endif endif
ifeq ($(CONFIG_ARCH_NETWINDER),y) ifeq ($(CONFIG_ARCH_NETWINDER),y)
......
...@@ -55,6 +55,18 @@ ...@@ -55,6 +55,18 @@
.macro writeb, rb .macro writeb, rb
strb \rb, [r3, #0] strb \rb, [r3, #0]
.endm .endm
#elif defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb
mov \rb, #0x80000000 @ physical base address
# if defined(CONFIG_DEBUG_LL_SER3)
add \rb, \rb, #0x00050000 @ Ser3
# else
add \rb, \rb, #0x00010000 @ Ser1
# endif
.endm
.macro writeb, rb
str \rb, [r3, #0x14] @ UTDR
.endm
#else #else
#error no serial architecture defined #error no serial architecture defined
#endif #endif
...@@ -151,22 +163,55 @@ not_angel: ...@@ -151,22 +163,55 @@ not_angel:
ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp}
subs r0, r0, r1 @ calculate the delta offset subs r0, r0, r1 @ calculate the delta offset
teq r0, #0 @ if delta is zero, we're @ if delta is zero, we're
beq not_relocated @ running at the address we beq not_relocated @ running at the address we
@ were linked at. @ were linked at.
add r2, r2, r0 @ different address, so we /*
add r3, r3, r0 @ need to fix up various * We're running at a different address. We need to fix
add r5, r5, r0 @ pointers. * up various pointers:
* r5 - zImage base address
* r6 - GOT start
* ip - GOT end
*/
add r5, r5, r0
add r6, r6, r0 add r6, r6, r0
add ip, ip, r0 add ip, ip, r0
#ifndef CONFIG_ZBOOT_ROM
/*
* If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
* we need to fix up pointers into the BSS region.
* r2 - BSS start
* r3 - BSS end
* sp - stack pointer
*/
add r2, r2, r0
add r3, r3, r0
add sp, sp, r0 add sp, sp, r0
/*
* Relocate all entries in the GOT table.
*/
1: ldr r1, [r6, #0] @ relocate entries in the GOT 1: ldr r1, [r6, #0] @ relocate entries in the GOT
add r1, r1, r0 @ table. This fixes up the add r1, r1, r0 @ table. This fixes up the
str r1, [r6], #4 @ C references. str r1, [r6], #4 @ C references.
cmp r6, ip cmp r6, ip
blo 1b blo 1b
#else
/*
* Relocate entries in the GOT table. We only relocate
* the entries that are outside the (relocated) BSS region.
*/
1: ldr r1, [r6, #0] @ relocate entries in the GOT
cmp r1, r2 @ entry < bss_start ||
cmphs r3, r1 @ _end < entry
addlo r1, r1, r0 @ table. This fixes up the
str r1, [r6], #4 @ C references.
cmp r6, ip
blo 1b
#endif
not_relocated: mov r0, #0 not_relocated: mov r0, #0
1: str r0, [r2], #4 @ clear bss 1: str r0, [r2], #4 @ clear bss
...@@ -176,6 +221,11 @@ not_relocated: mov r0, #0 ...@@ -176,6 +221,11 @@ not_relocated: mov r0, #0
cmp r2, r3 cmp r2, r3
blo 1b blo 1b
/*
* The C runtime environment should now be setup
* sufficiently. Turn the cache on, set up some
* pointers, and start decompressing.
*/
bl cache_on bl cache_on
mov r1, sp @ malloc space above stack mov r1, sp @ malloc space above stack
......
...@@ -21,78 +21,59 @@ ...@@ -21,78 +21,59 @@
#include <asm/assembler.h> #include <asm/assembler.h>
.text .text
#define BOLD 0x01 LC0: .word LC0
#define ITALIC 0x02 .word bytes_per_char_h
#define UNDERLINE 0x04
#define FLASH 0x08
#define INVERSE 0x10
LC0: .word bytes_per_char_h
.word video_size_row .word video_size_row
.word acorndata_8x8 .word acorndata_8x8
.word con_charconvtable .word con_charconvtable
/*
* r0 = ptr
* r1 = char
* r2 = white
*/
ENTRY(ll_write_char) ENTRY(ll_write_char)
stmfd sp!, {r4 - r7, lr} stmfd sp!, {r4 - r7, lr}
@ @
@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc) @ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
@ @
eor ip, r1, #UNDERLINE << 9 /*
/*
* calculate colours
*/
tst r1, #INVERSE << 9
moveq r2, r1, lsr #16
moveq r3, r1, lsr #24
movne r2, r1, lsr #24
movne r3, r1, lsr #16
and r3, r3, #255
and r2, r2, #255
/*
* calculate offset into character table * calculate offset into character table
*/ */
mov r1, r1, lsl #23 mov r1, r1, lsl #3
mov r1, r1, lsr #20 /*
/* * calculate offset required for each row.
* calculate offset required for each row [maybe I should make this an argument to this fn.
* Have to see what the register usage is like in the calling routines.
*/ */
adr r4, LC0 adr ip, LC0
ldmia r4, {r4, r5, r6, lr} ldmia ip, {r3, r4, r5, r6, lr}
ldr r4, [r4] sub ip, ip, r3
ldr r5, [r5] add r6, r6, ip
/* add lr, lr, ip
ldr r4, [r4, ip]
ldr r5, [r5, ip]
/*
* Go to resolution-dependent routine... * Go to resolution-dependent routine...
*/ */
cmp r4, #4 cmp r4, #4
blt Lrow1bpp blt Lrow1bpp
eor r2, r3, r2 @ Create eor mask to change colour from bg
orr r3, r3, r3, lsl #8 @ to fg.
orr r3, r3, r3, lsl #16
add r0, r0, r5, lsl #3 @ Move to bottom of character add r0, r0, r5, lsl #3 @ Move to bottom of character
add r1, r1, #7 orr r1, r1, #7
ldrb r7, [r6, r1] ldrb r7, [r6, r1]
tst ip, #UNDERLINE << 9
eoreq r7, r7, #255
teq r4, #8 teq r4, #8
beq Lrow8bpplp beq Lrow8bpplp
@ @
@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc) @ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
@ @
orr r3, r3, r3, lsl #4 Lrow4bpplp:
Lrow4bpplp: ldr r7, [lr, r7, lsl #2] ldr r7, [lr, r7, lsl #2]
mul r7, r2, r7 mul r7, r2, r7
tst r1, #7 @ avoid using r7 directly after sub r1, r1, #1 @ avoid using r7 directly after
eor ip, r3, r7 str r7, [r0, -r5]!
str ip, [r0, -r5]!
LOADREGS(eqfd, sp!, {r4 - r7, pc})
sub r1, r1, #1
ldrb r7, [r6, r1] ldrb r7, [r6, r1]
ldr r7, [lr, r7, lsl #2] ldr r7, [lr, r7, lsl #2]
mul r7, r2, r7 mul r7, r2, r7
tst r1, #7 @ avoid using r7 directly after tst r1, #7 @ avoid using r7 directly after
eor ip, r3, r7 str r7, [r0, -r5]!
str ip, [r0, -r5]!
subne r1, r1, #1 subne r1, r1, #1
ldrneb r7, [r6, r1] ldrneb r7, [r6, r1]
bne Lrow4bpplp bne Lrow4bpplp
...@@ -101,19 +82,16 @@ Lrow4bpplp: ldr r7, [lr, r7, lsl #2] ...@@ -101,19 +82,16 @@ Lrow4bpplp: ldr r7, [lr, r7, lsl #2]
@ @
@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc) @ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
@ @
Lrow8bpplp: mov ip, r7, lsr #4 Lrow8bpplp:
mov ip, r7, lsr #4
ldr ip, [lr, ip, lsl #2] ldr ip, [lr, ip, lsl #2]
mul r4, r2, ip mul r4, r2, ip
and ip, r7, #15 @ avoid r4 and ip, r7, #15 @ avoid r4
ldr ip, [lr, ip, lsl #2] @ avoid r4 ldr ip, [lr, ip, lsl #2] @ avoid r4
mul ip, r2, ip @ avoid r4 mul ip, r2, ip @ avoid r4
eor r4, r3, r4 @ avoid ip sub r1, r1, #1 @ avoid ip
tst r1, #7 @ avoid ip
sub r0, r0, r5 @ avoid ip sub r0, r0, r5 @ avoid ip
eor ip, r3, ip
stmia r0, {r4, ip} stmia r0, {r4, ip}
LOADREGS(eqfd, sp!, {r4 - r7, pc})
sub r1, r1, #1
ldrb r7, [r6, r1] ldrb r7, [r6, r1]
mov ip, r7, lsr #4 mov ip, r7, lsr #4
ldr ip, [lr, ip, lsl #2] ldr ip, [lr, ip, lsl #2]
...@@ -121,10 +99,8 @@ Lrow8bpplp: mov ip, r7, lsr #4 ...@@ -121,10 +99,8 @@ Lrow8bpplp: mov ip, r7, lsr #4
and ip, r7, #15 @ avoid r4 and ip, r7, #15 @ avoid r4
ldr ip, [lr, ip, lsl #2] @ avoid r4 ldr ip, [lr, ip, lsl #2] @ avoid r4
mul ip, r2, ip @ avoid r4 mul ip, r2, ip @ avoid r4
eor r4, r3, r4 @ avoid ip
tst r1, #7 @ avoid ip tst r1, #7 @ avoid ip
sub r0, r0, r5 @ avoid ip sub r0, r0, r5 @ avoid ip
eor ip, r3, ip
stmia r0, {r4, ip} stmia r0, {r4, ip}
subne r1, r1, #1 subne r1, r1, #1
ldrneb r7, [r6, r1] ldrneb r7, [r6, r1]
...@@ -134,11 +110,9 @@ Lrow8bpplp: mov ip, r7, lsr #4 ...@@ -134,11 +110,9 @@ Lrow8bpplp: mov ip, r7, lsr #4
@ @
@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc) @ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
@ @
Lrow1bpp: add r6, r6, r1 Lrow1bpp:
add r6, r6, r1
ldmia r6, {r4, r7} ldmia r6, {r4, r7}
tst ip, #INVERSE << 9
mvnne r4, r4
mvnne r7, r7
strb r4, [r0], r5 strb r4, [r0], r5
mov r4, r4, lsr #8 mov r4, r4, lsr #8
strb r4, [r0], r5 strb r4, [r0], r5
...@@ -152,8 +126,6 @@ Lrow1bpp: add r6, r6, r1 ...@@ -152,8 +126,6 @@ Lrow1bpp: add r6, r6, r1
mov r7, r7, lsr #8 mov r7, r7, lsr #8
strb r7, [r0], r5 strb r7, [r0], r5
mov r7, r7, lsr #8 mov r7, r7, lsr #8
tst ip, #UNDERLINE << 9
mvneq r7, r7
strb r7, [r0], r5 strb r7, [r0], r5
LOADREGS(fd, sp!, {r4 - r7, pc}) LOADREGS(fd, sp!, {r4 - r7, pc})
......
...@@ -94,6 +94,8 @@ if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \ ...@@ -94,6 +94,8 @@ if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
"$CONFIG_SA1100_XP860" = "y" ]; then "$CONFIG_SA1100_XP860" = "y" ]; then
define_bool CONFIG_SA1111 y define_bool CONFIG_SA1111 y
define_int CONFIG_FORCE_MAX_ZONEORDER 9 define_int CONFIG_FORCE_MAX_ZONEORDER 9
else
define_bool CONFIG_SA1111 n
fi fi
comment 'Processor Type' comment 'Processor Type'
...@@ -231,6 +233,8 @@ if [ "$CONFIG_CPU_ARM720T" = "y" -o "$CONFIG_CPU_ARM920T" = "y" -o \ ...@@ -231,6 +233,8 @@ if [ "$CONFIG_CPU_ARM720T" = "y" -o "$CONFIG_CPU_ARM920T" = "y" -o \
"$CONFIG_CPU_ARM922T" = "y" -o "$CONFIG_CPU_ARM926T" = "y" -o \ "$CONFIG_CPU_ARM922T" = "y" -o "$CONFIG_CPU_ARM926T" = "y" -o \
"$CONFIG_CPU_ARM1020" = "y" -o "$CONFIG_CPU_XSCALE" = "y" ]; then "$CONFIG_CPU_ARM1020" = "y" -o "$CONFIG_CPU_XSCALE" = "y" ]; then
dep_bool 'Support Thumb instructions (EXPERIMENTAL)' CONFIG_ARM_THUMB $CONFIG_EXPERIMENTAL dep_bool 'Support Thumb instructions (EXPERIMENTAL)' CONFIG_ARM_THUMB $CONFIG_EXPERIMENTAL
else
define_bool CONFIG_ARM_THUMB n
fi fi
if [ "$CONFIG_CPU_ARM920T" = "y" -o "$CONFIG_CPU_ARM922T" = "y" -o \ if [ "$CONFIG_CPU_ARM920T" = "y" -o "$CONFIG_CPU_ARM922T" = "y" -o \
"$CONFIG_CPU_ARM926T" = "y" -o "$CONFIG_CPU_ARM1020" = "y" ]; then "$CONFIG_CPU_ARM926T" = "y" -o "$CONFIG_CPU_ARM1020" = "y" ]; then
......
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <asm/elf.h> #include <asm/elf.h>
#include <asm/page.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
......
...@@ -599,7 +599,7 @@ void pcibios_align_resource(void *data, struct resource *res, ...@@ -599,7 +599,7 @@ void pcibios_align_resource(void *data, struct resource *res,
* pcibios_enable_device - Enable I/O and memory. * pcibios_enable_device - Enable I/O and memory.
* @dev: PCI device to be enabled * @dev: PCI device to be enabled
*/ */
int pcibios_enable_device(struct pci_dev *dev) int pcibios_enable_device(struct pci_dev *dev, int mask)
{ {
u16 cmd, old_cmd; u16 cmd, old_cmd;
int idx; int idx;
...@@ -608,6 +608,10 @@ int pcibios_enable_device(struct pci_dev *dev) ...@@ -608,6 +608,10 @@ int pcibios_enable_device(struct pci_dev *dev)
pci_read_config_word(dev, PCI_COMMAND, &cmd); pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd; old_cmd = cmd;
for (idx = 0; idx < 6; idx++) { for (idx = 0; idx < 6; idx++) {
/* Only set up the requested stuff */
if (!(mask & (1 << idx)))
continue;
r = dev->resource + idx; r = dev->resource + idx;
if (!r->start && r->end) { if (!r->start && r->end) {
printk(KERN_ERR "PCI: Device %s not available because" printk(KERN_ERR "PCI: Device %s not available because"
...@@ -626,3 +630,29 @@ int pcibios_enable_device(struct pci_dev *dev) ...@@ -626,3 +630,29 @@ int pcibios_enable_device(struct pci_dev *dev)
} }
return 0; return 0;
} }
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
struct pci_sys_data *root = dev->sysdata;
unsigned long prot, phys;
if (mmap_state == pci_mmap_io) {
return -EINVAL;
} else {
phys = root->mem_offset + (vma->vm_pgoff << PAGE_SHIFT);
}
/*
* Mark this as IO
*/
vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (remap_page_range(vma, vma->vm_start, phys,
vma->vm_end - vma->vm_start,
vma->vm_page_prot))
return -EAGAIN;
return 0;
}
...@@ -38,6 +38,7 @@ ...@@ -38,6 +38,7 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
#include <linux/notifier.h> #include <linux/notifier.h>
#include <linux/device.h>
#include <linux/init.h> #include <linux/init.h>
#include <asm/dma.h> #include <asm/dma.h>
...@@ -48,6 +49,7 @@ ...@@ -48,6 +49,7 @@
#include <asm/pgalloc.h> #include <asm/pgalloc.h>
#include <asm/mmu_context.h> #include <asm/mmu_context.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/tlbflush.h>
#ifndef CONFIG_ARCH_RPC #ifndef CONFIG_ARCH_RPC
#define HAVE_EXPMASK #define HAVE_EXPMASK
...@@ -92,6 +94,8 @@ ecard_loader_reset(volatile unsigned char *pa, loader_t loader); ...@@ -92,6 +94,8 @@ ecard_loader_reset(volatile unsigned char *pa, loader_t loader);
asmlinkage extern int asmlinkage extern int
ecard_loader_read(int off, volatile unsigned char *pa, loader_t loader); ecard_loader_read(int off, volatile unsigned char *pa, loader_t loader);
static const struct ecard_id *
ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec);
static inline unsigned short static inline unsigned short
ecard_getu16(unsigned char *v) ecard_getu16(unsigned char *v)
...@@ -969,6 +973,14 @@ ecard_probe(int slot, card_type_t type) ...@@ -969,6 +973,14 @@ ecard_probe(int slot, card_type_t type)
*ecp = ec; *ecp = ec;
slot_to_expcard[slot] = ec; slot_to_expcard[slot] = ec;
snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
strcpy(ec->dev.name, "fixme!");
ec->dev.parent = NULL;
ec->dev.bus = &ecard_bus_type;
device_register(&ec->dev);
return 0; return 0;
nodev: nodev:
...@@ -995,22 +1007,17 @@ ecard_t *ecard_find(int cid, const card_ids *cids) ...@@ -995,22 +1007,17 @@ ecard_t *ecard_find(int cid, const card_ids *cids)
if (finding_pos->claimed) if (finding_pos->claimed)
continue; continue;
if (finding_pos->dev.driver)
continue;
if (!cids) { if (!cids) {
if ((finding_pos->cid.id ^ cid) == 0) if ((finding_pos->cid.id ^ cid) == 0)
break; break;
} else { } else {
unsigned int manufacturer, product; const struct ecard_id *id;
int i;
manufacturer = finding_pos->cid.manufacturer;
product = finding_pos->cid.product;
for (i = 0; cids[i].manufacturer != 65535; i++) id = ecard_match_device(cids, finding_pos);
if (manufacturer == cids[i].manufacturer && if (id)
product == cids[i].product)
break;
if (cids[i].manufacturer != 65535)
break; break;
} }
} }
...@@ -1023,7 +1030,7 @@ ecard_t *ecard_find(int cid, const card_ids *cids) ...@@ -1023,7 +1030,7 @@ ecard_t *ecard_find(int cid, const card_ids *cids)
* Locate all hardware - interrupt management and * Locate all hardware - interrupt management and
* actual cards. * actual cards.
*/ */
void __init ecard_init(void) static int __init ecard_init(void)
{ {
int slot, irqhw; int slot, irqhw;
...@@ -1053,11 +1060,96 @@ void __init ecard_init(void) ...@@ -1053,11 +1060,96 @@ void __init ecard_init(void)
irqhw ? ecard_irqexp_handler : ecard_irq_handler); irqhw ? ecard_irqexp_handler : ecard_irq_handler);
ecard_proc_init(); ecard_proc_init();
return 0;
} }
subsys_initcall(ecard_init); subsys_initcall(ecard_init);
/*
* ECARD "bus"
*/
static const struct ecard_id *
ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
{
int i;
for (i = 0; ids[i].manufacturer != 65535; i++)
if (ec->cid.manufacturer == ids[i].manufacturer &&
ec->cid.product == ids[i].product)
return ids + i;
return NULL;
}
static int ecard_drv_probe(struct device *dev)
{
struct expansion_card *ec = ECARD_DEV(dev);
struct ecard_driver *drv = ECARD_DRV(dev->driver);
const struct ecard_id *id;
id = ecard_match_device(drv->id_table, ec);
return drv->probe(ec, id);
}
static int ecard_drv_remove(struct device *dev)
{
struct expansion_card *ec = ECARD_DEV(dev);
struct ecard_driver *drv = ECARD_DRV(dev->driver);
drv->remove(ec);
return 0;
}
int ecard_register_driver(struct ecard_driver *drv)
{
drv->drv.bus = &ecard_bus_type;
drv->drv.probe = ecard_drv_probe;
drv->drv.remove = ecard_drv_remove;
return driver_register(&drv->drv);
}
void ecard_remove_driver(struct ecard_driver *drv)
{
remove_driver(&drv->drv);
}
static int ecard_match(struct device *_dev, struct device_driver *_drv)
{
struct expansion_card *ec = ECARD_DEV(_dev);
struct ecard_driver *drv = ECARD_DRV(_drv);
int ret;
if (drv->id_table) {
ret = ecard_match_device(drv->id_table, ec) != NULL;
} else {
ret = ec->cid.id == drv->id;
}
return ret;
}
struct bus_type ecard_bus_type = {
.name = "ecard",
.match = ecard_match,
};
static int ecard_bus_init(void)
{
return bus_register(&ecard_bus_type);
}
postcore_initcall(ecard_bus_init);
EXPORT_SYMBOL(ecard_startfind); EXPORT_SYMBOL(ecard_startfind);
EXPORT_SYMBOL(ecard_find); EXPORT_SYMBOL(ecard_find);
EXPORT_SYMBOL(ecard_readchunk); EXPORT_SYMBOL(ecard_readchunk);
EXPORT_SYMBOL(ecard_address); EXPORT_SYMBOL(ecard_address);
EXPORT_SYMBOL(ecard_register_driver);
EXPORT_SYMBOL(ecard_remove_driver);
EXPORT_SYMBOL(ecard_bus_type);
...@@ -189,11 +189,10 @@ irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 ...@@ -189,11 +189,10 @@ irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov r4, #0xe0000000 mov r4, #0xe0000000
orr r4, r4, #0x20
mov \irqstat, #0x0C mov \irqstat, #0x0C
strb \irqstat, [r4] @outb(0x0C, 0x20) /* Poll command */ strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */
ldrb \irqnr, [r4] @irq = inb(0x20) & 7 ldrb \irqnr, [r4, #0x10] @irq = inb(0x20) & 7
and \irqstat, \irqnr, #0x80 and \irqstat, \irqnr, #0x80
teq \irqstat, #0 teq \irqstat, #0
beq 43f beq 43f
...@@ -201,8 +200,8 @@ irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 ...@@ -201,8 +200,8 @@ irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
teq \irqnr, #2 teq \irqnr, #2
bne 44f bne 44f
43: mov \irqstat, #0x0C 43: mov \irqstat, #0x0C
strb \irqstat, [r4, #0x80] @outb(0x0C, 0xA0) /* Poll command */ strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
ldrb \irqnr, [r4, #0x80] @irq = (inb(0xA0) & 7) + 8 ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8
and \irqstat, \irqnr, #0x80 and \irqstat, \irqnr, #0x80
teq \irqstat, #0 teq \irqstat, #0
beq 44f beq 44f
...@@ -655,7 +654,7 @@ __und_invalid: sub sp, sp, #S_FRAME_SIZE ...@@ -655,7 +654,7 @@ __und_invalid: sub sp, sp, #S_FRAME_SIZE
and r2, r6, #31 @ int mode and r2, r6, #31 @ int mode
b bad_mode b bad_mode
#if defined CONFIG_FPE_NWFPE || defined CONFIG_FPE_FASTFPE #if 1 /* defined CONFIG_FPE_NWFPE || defined CONFIG_FPE_FASTFPE */
/* The FPE is always present */ /* The FPE is always present */
.equ fpe_not_present, fpundefinstr .equ fpe_not_present, fpundefinstr
#else #else
...@@ -766,6 +765,8 @@ preempt_return: ...@@ -766,6 +765,8 @@ preempt_return:
msr spsr, r0 msr spsr, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.ltorg
#ifdef CONFIG_PREEMPT #ifdef CONFIG_PREEMPT
svc_preempt: teq r9, #0 @ was preempt count = 0 svc_preempt: teq r9, #0 @ was preempt count = 0
ldreq r6, .LCirq_stat ldreq r6, .LCirq_stat
...@@ -902,6 +903,8 @@ __irq_usr: sub sp, sp, #S_FRAME_SIZE ...@@ -902,6 +903,8 @@ __irq_usr: sub sp, sp, #S_FRAME_SIZE
mov why, #0 mov why, #0
b ret_to_user b ret_to_user
.ltorg
.align 5 .align 5
__und_usr: sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go __und_usr: sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
stmia sp, {r0 - r12} @ Save r0 - r12 stmia sp, {r0 - r12} @ Save r0 - r12
......
...@@ -367,8 +367,8 @@ void dump_thread(struct pt_regs * regs, struct user * dump) ...@@ -367,8 +367,8 @@ void dump_thread(struct pt_regs * regs, struct user * dump)
dump->u_debugreg[0] = tsk->thread.debug.bp[0].address; dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
dump->u_debugreg[1] = tsk->thread.debug.bp[1].address; dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn; dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn; dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
dump->u_debugreg[4] = tsk->thread.debug.nsaved; dump->u_debugreg[4] = tsk->thread.debug.nsaved;
if (dump->start_stack < 0x04000000) if (dump->start_stack < 0x04000000)
......
...@@ -32,10 +32,24 @@ ...@@ -32,10 +32,24 @@
* in exit.c or in signal.c. * in exit.c or in signal.c.
*/ */
#if 1
/* /*
* Breakpoint SWI instruction: SWI &9F0001 * Breakpoint SWI instruction: SWI &9F0001
*/ */
#define BREAKINST_ARM 0xef9f0001 #define BREAKINST_ARM 0xef9f0001
#define BREAKINST_THUMB 0xdf00 /* fill this in later */
#else
/*
* New breakpoints - use an undefined instruction. The ARM architecture
* reference manual guarantees that the following instruction space
* will produce an undefined instruction exception on all CPUs:
*
* ARM: xxxx 0111 1111 xxxx xxxx xxxx 1111 xxxx
* Thumb: 1101 1110 xxxx xxxx
*/
#define BREAKINST_ARM 0xe7f001f0
#define BREAKINST_THUMB 0xde01
#endif
/* /*
* Get the address of the live pt_regs for the specified task. * Get the address of the live pt_regs for the specified task.
...@@ -89,23 +103,32 @@ put_user_reg(struct task_struct *task, int offset, long data) ...@@ -89,23 +103,32 @@ put_user_reg(struct task_struct *task, int offset, long data)
} }
static inline int static inline int
read_tsk_long(struct task_struct *child, unsigned long addr, unsigned long *res) read_u32(struct task_struct *task, unsigned long addr, u32 *res)
{ {
int copied; int ret;
copied = access_process_vm(child, addr, res, sizeof(*res), 0); ret = access_process_vm(task, addr, res, sizeof(*res), 0);
return copied != sizeof(*res) ? -EIO : 0; return ret == sizeof(*res) ? 0 : -EIO;
} }
static inline int static inline int
write_tsk_long(struct task_struct *child, unsigned long addr, unsigned long val) read_instr(struct task_struct *task, unsigned long addr, u32 *res)
{ {
int copied; int ret;
copied = access_process_vm(child, addr, &val, sizeof(val), 1);
return copied != sizeof(val) ? -EIO : 0; if (addr & 1) {
u16 val;
ret = access_process_vm(task, addr & ~1, &val, sizeof(val), 0);
ret = ret == sizeof(val) ? 0 : -EIO;
*res = val;
} else {
u32 val;
ret = access_process_vm(task, addr & ~3, &val, sizeof(val), 0);
ret = ret == sizeof(val) ? 0 : -EIO;
*res = val;
}
return ret;
} }
/* /*
...@@ -206,7 +229,7 @@ ptrace_getldrop2(struct task_struct *child, unsigned long insn) ...@@ -206,7 +229,7 @@ ptrace_getldrop2(struct task_struct *child, unsigned long insn)
static unsigned long static unsigned long
get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn) get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn)
{ {
unsigned long alt = 0; u32 alt = 0;
switch (insn & 0x0e000000) { switch (insn & 0x0e000000) {
case 0x00000000: case 0x00000000:
...@@ -262,7 +285,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in ...@@ -262,7 +285,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
else else
base -= aluop2; base -= aluop2;
} }
if (read_tsk_long(child, base, &alt) == 0) if (read_u32(child, base, &alt) == 0)
alt = pc_pointer(alt); alt = pc_pointer(alt);
} }
break; break;
...@@ -289,7 +312,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in ...@@ -289,7 +312,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
base = ptrace_getrn(child, insn); base = ptrace_getrn(child, insn);
if (read_tsk_long(child, base + nr_regs, &alt) == 0) if (read_u32(child, base + nr_regs, &alt) == 0)
alt = pc_pointer(alt); alt = pc_pointer(alt);
break; break;
} }
...@@ -319,30 +342,71 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in ...@@ -319,30 +342,71 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
} }
static int static int
add_breakpoint(struct task_struct *child, struct debug_info *dbg, unsigned long addr) swap_insn(struct task_struct *task, unsigned long addr,
void *old_insn, void *new_insn, int size)
{
int ret;
ret = access_process_vm(task, addr, old_insn, size, 0);
if (ret == size)
ret = access_process_vm(task, addr, new_insn, size, 1);
return ret;
}
static void
add_breakpoint(struct task_struct *task, struct debug_info *dbg, unsigned long addr)
{ {
int nr = dbg->nsaved; int nr = dbg->nsaved;
int res = -EINVAL;
if (nr < 2) { if (nr < 2) {
res = read_tsk_long(child, addr, &dbg->bp[nr].insn); u32 new_insn = BREAKINST_ARM;
if (res == 0) int res;
res = write_tsk_long(child, addr, BREAKINST_ARM);
res = swap_insn(task, addr, &dbg->bp[nr].insn, &new_insn, 4);
if (res == 0) { if (res == 4) {
dbg->bp[nr].address = addr; dbg->bp[nr].address = addr;
dbg->nsaved += 1; dbg->nsaved += 1;
} }
} else } else
printk(KERN_ERR "ptrace: too many breakpoints\n"); printk(KERN_ERR "ptrace: too many breakpoints\n");
}
return res; /*
* Clear one breakpoint in the user program. We copy what the hardware
* does and use bit 0 of the address to indicate whether this is a Thumb
* breakpoint or an ARM breakpoint.
*/
static void clear_breakpoint(struct task_struct *task, struct debug_entry *bp)
{
unsigned long addr = bp->address;
union debug_insn old_insn;
int ret;
if (addr & 1) {
ret = swap_insn(task, addr & ~1, &old_insn.thumb,
&bp->insn.thumb, 2);
if (ret != 2 || old_insn.thumb != BREAKINST_THUMB)
printk(KERN_ERR "%s:%d: corrupted Thumb breakpoint at "
"0x%08lx (0x%04x)\n", task->comm, task->pid,
addr, old_insn.thumb);
} else {
ret = swap_insn(task, addr & ~3, &old_insn.arm,
&bp->insn.arm, 4);
if (ret != 4 || old_insn.arm != BREAKINST_ARM)
printk(KERN_ERR "%s:%d: corrupted ARM breakpoint at "
"0x%08lx (0x%08x)\n", task->comm, task->pid,
addr, old_insn.arm);
}
} }
void ptrace_set_bpt(struct task_struct *child) void ptrace_set_bpt(struct task_struct *child)
{ {
struct pt_regs *regs; struct pt_regs *regs;
unsigned long pc, insn; unsigned long pc;
u32 insn;
int res; int res;
regs = get_user_regs(child); regs = get_user_regs(child);
...@@ -353,7 +417,7 @@ void ptrace_set_bpt(struct task_struct *child) ...@@ -353,7 +417,7 @@ void ptrace_set_bpt(struct task_struct *child)
return; return;
} }
res = read_tsk_long(child, pc, &insn); res = read_instr(child, pc, &insn);
if (!res) { if (!res) {
struct debug_info *dbg = &child->thread.debug; struct debug_info *dbg = &child->thread.debug;
unsigned long alt; unsigned long alt;
...@@ -362,7 +426,7 @@ void ptrace_set_bpt(struct task_struct *child) ...@@ -362,7 +426,7 @@ void ptrace_set_bpt(struct task_struct *child)
alt = get_branch_address(child, pc, insn); alt = get_branch_address(child, pc, insn);
if (alt) if (alt)
res = add_breakpoint(child, dbg, alt); add_breakpoint(child, dbg, alt);
/* /*
* Note that we ignore the result of setting the above * Note that we ignore the result of setting the above
...@@ -374,7 +438,7 @@ void ptrace_set_bpt(struct task_struct *child) ...@@ -374,7 +438,7 @@ void ptrace_set_bpt(struct task_struct *child)
* loose control of the thread during single stepping. * loose control of the thread during single stepping.
*/ */
if (!alt || predicate(insn) != PREDICATE_ALWAYS) if (!alt || predicate(insn) != PREDICATE_ALWAYS)
res = add_breakpoint(child, dbg, pc + 4); add_breakpoint(child, dbg, pc + 4);
} }
} }
...@@ -384,24 +448,17 @@ void ptrace_set_bpt(struct task_struct *child) ...@@ -384,24 +448,17 @@ void ptrace_set_bpt(struct task_struct *child)
*/ */
void __ptrace_cancel_bpt(struct task_struct *child) void __ptrace_cancel_bpt(struct task_struct *child)
{ {
struct debug_info *dbg = &child->thread.debug; int i, nsaved = child->thread.debug.nsaved;
int i, nsaved = dbg->nsaved;
dbg->nsaved = 0; child->thread.debug.nsaved = 0;
if (nsaved > 2) { if (nsaved > 2) {
printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved); printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
nsaved = 2; nsaved = 2;
} }
for (i = 0; i < nsaved; i++) { for (i = 0; i < nsaved; i++)
unsigned long tmp; clear_breakpoint(child, &child->thread.debug.bp[i]);
read_tsk_long(child, dbg->bp[i].address, &tmp);
write_tsk_long(child, dbg->bp[i].address, dbg->bp[i].insn);
if (tmp != BREAKINST_ARM)
printk(KERN_ERR "ptrace_cancel_bpt: weirdness\n");
}
} }
/* /*
...@@ -537,9 +594,12 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat ...@@ -537,9 +594,12 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
*/ */
case PTRACE_PEEKTEXT: case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA: case PTRACE_PEEKDATA:
ret = read_tsk_long(child, addr, &tmp); ret = access_process_vm(child, addr, &tmp,
if (!ret) sizeof(unsigned long), 0);
if (ret == sizeof(unsigned long))
ret = put_user(tmp, (unsigned long *) data); ret = put_user(tmp, (unsigned long *) data);
else
ret = -EIO;
break; break;
case PTRACE_PEEKUSR: case PTRACE_PEEKUSR:
...@@ -551,7 +611,12 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat ...@@ -551,7 +611,12 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
*/ */
case PTRACE_POKETEXT: case PTRACE_POKETEXT:
case PTRACE_POKEDATA: case PTRACE_POKEDATA:
ret = write_tsk_long(child, addr, data); ret = access_process_vm(child, addr, &data,
sizeof(unsigned long), 1);
if (ret == sizeof(unsigned long))
ret = 0;
else
ret = -EIO;
break; break;
case PTRACE_POKEUSR: case PTRACE_POKEUSR:
......
...@@ -193,26 +193,25 @@ static inline void dump_cache(const char *prefix, unsigned int cache) ...@@ -193,26 +193,25 @@ static inline void dump_cache(const char *prefix, unsigned int cache)
CACHE_LINE(cache))); CACHE_LINE(cache)));
} }
static inline void dump_cpu_cache_id(void) static void __init dump_cpu_info(void)
{ {
unsigned int cache_info; unsigned int info;
asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_info));
if (cache_info == processor_id) asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (info));
return;
printk("CPU: D %s cache\n", cache_types[CACHE_TYPE(cache_info)]); if (info != processor_id) {
if (CACHE_S(cache_info)) { printk("CPU: D %s cache\n", cache_types[CACHE_TYPE(info)]);
dump_cache("CPU: I cache", CACHE_ISIZE(cache_info)); if (CACHE_S(info)) {
dump_cache("CPU: D cache", CACHE_DSIZE(cache_info)); dump_cache("CPU: I cache", CACHE_ISIZE(info));
dump_cache("CPU: D cache", CACHE_DSIZE(info));
} else { } else {
dump_cache("CPU: cache", CACHE_ISIZE(cache_info)); dump_cache("CPU: cache", CACHE_ISIZE(info));
}
} }
} }
#else #else
#define dump_cpu_cache_id() do { } while (0) #define dump_cpu_info() do { } while (0)
#endif #endif
static void __init setup_processor(void) static void __init setup_processor(void)
...@@ -255,7 +254,7 @@ static void __init setup_processor(void) ...@@ -255,7 +254,7 @@ static void __init setup_processor(void)
proc_info.manufacturer, proc_info.cpu_name, proc_info.manufacturer, proc_info.cpu_name,
(int)processor_id & 15); (int)processor_id & 15);
dump_cpu_cache_id(); dump_cpu_info();
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS); sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
......
...@@ -59,11 +59,11 @@ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t m ...@@ -59,11 +59,11 @@ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t m
sigset_t saveset; sigset_t saveset;
mask &= _BLOCKABLE; mask &= _BLOCKABLE;
spin_lock_irq(&current->sigmask_lock); spin_lock_irq(&current->sig->siglock);
saveset = current->blocked; saveset = current->blocked;
siginitset(&current->blocked, mask); siginitset(&current->blocked, mask);
recalc_sigpending(); recalc_sigpending();
spin_unlock_irq(&current->sigmask_lock); spin_unlock_irq(&current->sig->siglock);
regs->ARM_r0 = -EINTR; regs->ARM_r0 = -EINTR;
while (1) { while (1) {
...@@ -87,11 +87,11 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, struct pt_regs *regs) ...@@ -87,11 +87,11 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, struct pt_regs *regs)
return -EFAULT; return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE); sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(&current->sigmask_lock); spin_lock_irq(&current->sig->siglock);
saveset = current->blocked; saveset = current->blocked;
current->blocked = newset; current->blocked = newset;
recalc_sigpending(); recalc_sigpending();
spin_unlock_irq(&current->sigmask_lock); spin_unlock_irq(&current->sig->siglock);
regs->ARM_r0 = -EINTR; regs->ARM_r0 = -EINTR;
while (1) { while (1) {
...@@ -207,10 +207,10 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs) ...@@ -207,10 +207,10 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs)
goto badframe; goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE); sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sigmask_lock); spin_lock_irq(&current->sig->siglock);
current->blocked = set; current->blocked = set;
recalc_sigpending(); recalc_sigpending();
spin_unlock_irq(&current->sigmask_lock); spin_unlock_irq(&current->sig->siglock);
if (restore_sigcontext(regs, &frame->sc)) if (restore_sigcontext(regs, &frame->sc))
goto badframe; goto badframe;
...@@ -247,10 +247,10 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) ...@@ -247,10 +247,10 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
goto badframe; goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE); sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sigmask_lock); spin_lock_irq(&current->sig->siglock);
current->blocked = set; current->blocked = set;
recalc_sigpending(); recalc_sigpending();
spin_unlock_irq(&current->sigmask_lock); spin_unlock_irq(&current->sig->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe; goto badframe;
...@@ -477,12 +477,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, ...@@ -477,12 +477,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
ka->sa.sa_handler = SIG_DFL; ka->sa.sa_handler = SIG_DFL;
if (!(ka->sa.sa_flags & SA_NODEFER)) { if (!(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&tsk->sigmask_lock); spin_lock_irq(&tsk->sig->siglock);
sigorsets(&tsk->blocked, &tsk->blocked, sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask); &ka->sa.sa_mask);
sigaddset(&tsk->blocked, sig); sigaddset(&tsk->blocked, sig);
recalc_sigpending(); recalc_sigpending();
spin_unlock_irq(&tsk->sigmask_lock); spin_unlock_irq(&tsk->sig->siglock);
} }
return; return;
} }
...@@ -520,20 +520,10 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) ...@@ -520,20 +520,10 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
for (;;) { for (;;) {
unsigned long signr = 0; unsigned long signr = 0;
struct k_sigaction *ka; struct k_sigaction *ka;
sigset_t *mask = &current->blocked;
local_irq_disable(); spin_lock_irq(&current->sig->siglock);
if (current->sig->shared_pending.head) { signr = dequeue_signal(&current->blocked, &info);
spin_lock(&current->sig->siglock); spin_unlock_irq(&current->sig->siglock);
signr = dequeue_signal(&current->sig->shared_pending, mask, &info);
spin_unlock(&current->sig->siglock);
}
if (!signr) {
spin_lock(&current->sigmask_lock);
signr = dequeue_signal(&current->pending, mask, &info);
spin_unlock(&current->sigmask_lock);
}
local_irq_enable();
if (!signr) if (!signr)
break; break;
......
...@@ -25,44 +25,37 @@ extern unsigned long (*gettimeoffset)(void); ...@@ -25,44 +25,37 @@ extern unsigned long (*gettimeoffset)(void);
static unsigned long ioctime_gettimeoffset(void) static unsigned long ioctime_gettimeoffset(void)
{ {
unsigned int count1, count2, status1, status2; unsigned int count1, count2, status;
unsigned long offset = 0; long offset;
status1 = ioc_readb(IOC_IRQREQA);
barrier ();
ioc_writeb (0, IOC_T0LATCH); ioc_writeb (0, IOC_T0LATCH);
barrier (); barrier ();
count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
barrier (); barrier ();
status2 = ioc_readb(IOC_IRQREQA); status = ioc_readb(IOC_IRQREQA);
barrier (); barrier ();
ioc_writeb (0, IOC_T0LATCH); ioc_writeb (0, IOC_T0LATCH);
barrier (); barrier ();
count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8); count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
offset = count2;
if (count2 < count1) { if (count2 < count1) {
/* /*
* This means that we haven't just had an interrupt * We have not had an interrupt between reading count1
* while reading into status2. * and count2.
*/ */
if (status2 & (1 << 5)) if (status & (1 << 5))
offset = tick; offset -= LATCH;
count1 = count2;
} else if (count2 > count1) { } else if (count2 > count1) {
/* /*
* We have just had another interrupt while reading * We have just had another interrupt between reading
* status2. * count1 and count2.
*/ */
offset += tick; offset -= LATCH;
count1 = count2;
} }
count1 = LATCH - count1; offset = (LATCH - offset) * (tick_nsec / 1000);
/* return (offset + LATCH/2) / LATCH;
* count1 = number of clock ticks since last interrupt
*/
offset += count1 * tick / LATCH;
return offset;
} }
void __init ioctime_init(void) void __init ioctime_init(void)
......
...@@ -115,8 +115,8 @@ static inline void do_set_rtc(void) ...@@ -115,8 +115,8 @@ static inline void do_set_rtc(void)
time_before(xtime.tv_sec, next_rtc_update)) time_before(xtime.tv_sec, next_rtc_update))
return; return;
if (xtime.tv_usec < 50000 - (tick >> 1) && if (xtime.tv_nsec < 500000000 - ((unsigned) tick_nsec >> 1) &&
xtime.tv_usec >= 50000 + (tick >> 1)) xtime.tv_nsec >= 500000000 + ((unsigned) tick_nsec >> 1))
return; return;
if (set_rtc()) if (set_rtc())
...@@ -166,7 +166,7 @@ void do_gettimeofday(struct timeval *tv) ...@@ -166,7 +166,7 @@ void do_gettimeofday(struct timeval *tv)
usec += lost * USECS_PER_JIFFY; usec += lost * USECS_PER_JIFFY;
sec = xtime.tv_sec; sec = xtime.tv_sec;
usec += xtime.tv_usec; usec += xtime.tv_nsec / 1000;
read_unlock_irqrestore(&xtime_lock, flags); read_unlock_irqrestore(&xtime_lock, flags);
/* usec may have gone up a lot: be safe */ /* usec may have gone up a lot: be safe */
...@@ -196,7 +196,8 @@ void do_settimeofday(struct timeval *tv) ...@@ -196,7 +196,8 @@ void do_settimeofday(struct timeval *tv)
tv->tv_sec--; tv->tv_sec--;
} }
xtime = *tv; xtime.tv_sec = tv->tv_sec;
xtime.tv_nsec = tv->tv_usec * 1000;
time_adjust = 0; /* stop active adjtime() */ time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC; time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT; time_maxerror = NTP_PHASE_LIMIT;
......
...@@ -32,6 +32,7 @@ ...@@ -32,6 +32,7 @@
#include <asm/system.h> #include <asm/system.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/unistd.h> #include <asm/unistd.h>
#include <asm/semaphore.h>
#include "ptrace.h" #include "ptrace.h"
...@@ -77,8 +78,7 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top) ...@@ -77,8 +78,7 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
fs = get_fs(); fs = get_fs();
set_fs(KERNEL_DS); set_fs(KERNEL_DS);
printk("%s", str); printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
printk("(0x%08lx to 0x%08lx)\n", bottom, top);
for (p = bottom & ~31; p < top;) { for (p = bottom & ~31; p < top;) {
printk("%04lx: ", p & 0xffff); printk("%04lx: ", p & 0xffff);
...@@ -136,7 +136,7 @@ static void dump_instr(struct pt_regs *regs) ...@@ -136,7 +136,7 @@ static void dump_instr(struct pt_regs *regs)
set_fs(fs); set_fs(fs);
} }
static void dump_stack(struct task_struct *tsk, unsigned long sp) static void __dump_stack(struct task_struct *tsk, unsigned long sp)
{ {
dump_mem("Stack: ", sp, 8192+(unsigned long)tsk->thread_info); dump_mem("Stack: ", sp, 8192+(unsigned long)tsk->thread_info);
} }
...@@ -163,15 +163,20 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) ...@@ -163,15 +163,20 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
} }
/* /*
* This is called from SysRq-T (show_task) to display the current * This is called from SysRq-T (show_task) to display the current call
* call trace for each process. Very useful. * trace for each process. This version will also display the running
* threads call trace (ie, us.)
*/ */
void show_trace_task(struct task_struct *tsk) void show_trace_task(struct task_struct *tsk)
{ {
if (tsk != current) { unsigned int fp;
unsigned int fp = thread_saved_fp(tsk);
if (tsk != current)
fp = thread_saved_fp(tsk);
else
asm("mov%? %0, fp" : "=r" (fp));
c_backtrace(fp, 0x10); c_backtrace(fp, 0x10);
}
} }
spinlock_t die_lock = SPIN_LOCK_UNLOCKED; spinlock_t die_lock = SPIN_LOCK_UNLOCKED;
...@@ -193,7 +198,7 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) ...@@ -193,7 +198,7 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
current->comm, current->pid, tsk->thread_info + 1); current->comm, current->pid, tsk->thread_info + 1);
if (!user_mode(regs) || in_interrupt()) { if (!user_mode(regs) || in_interrupt()) {
dump_stack(tsk, (unsigned long)(regs + 1)); __dump_stack(tsk, (unsigned long)(regs + 1));
dump_backtrace(regs, tsk); dump_backtrace(regs, tsk);
dump_instr(regs); dump_instr(regs);
} }
......
...@@ -73,36 +73,37 @@ static struct vco freq_to_vco(unsigned int freq_khz, int factor) ...@@ -73,36 +73,37 @@ static struct vco freq_to_vco(unsigned int freq_khz, int factor)
* Validate the speed in khz. If it is outside our * Validate the speed in khz. If it is outside our
* range, then return the lowest. * range, then return the lowest.
*/ */
static unsigned int static void integrator_verify_speed(struct cpufreq_policy *policy)
integrator_validatespeed(unsigned int cpu, unsigned int freq_khz)
{ {
struct vco vco; struct vco vco;
if (freq_khz < 12000) if (policy->max > policy->max_cpu_freq)
freq_khz = 12000; policy->max = policy->max_cpu_freq;
if (freq_khz > 160000)
freq_khz = 160000;
vco = freq_to_vco(freq_khz, 1); if (policy->max < 12000)
policy->max = 12000;
if (policy->max > 160000)
policy->max = 160000;
if (vco.vdw < 4 || vco.vdw > 152) vco = freq_to_vco(policy->max, 1);
return -EINVAL;
return vco_to_freq(vco, 1); if (vco.vdw < 4)
vco.vdw = 4;
if (vco.vdw > 152)
vco.vdw = 152;
policy->min = policy->max = vco_to_freq(vco, 1);
} }
static void integrator_setspeed(unsigned int cpu, unsigned int freq_khz) static void do_set_policy(int cpu, struct cpufreq_policy *policy)
{ {
struct vco vco = freq_to_vco(freq_khz, 1); struct vco vco = freq_to_vco(policy->max, 1);
unsigned long cpus_allowed;
u_int cm_osc; u_int cm_osc;
/* /*
* Save this threads cpus_allowed mask, and bind to the * Bind to the specified CPU. When this call returns,
* specified CPU. When this call returns, we should be * we should be running on the right CPU.
* running on the right CPU.
*/ */
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, 1 << cpu); set_cpus_allowed(current, 1 << cpu);
BUG_ON(cpu != smp_processor_id()); BUG_ON(cpu != smp_processor_id());
...@@ -113,6 +114,26 @@ static void integrator_setspeed(unsigned int cpu, unsigned int freq_khz) ...@@ -113,6 +114,26 @@ static void integrator_setspeed(unsigned int cpu, unsigned int freq_khz)
__raw_writel(0xa05f, CM_LOCK); __raw_writel(0xa05f, CM_LOCK);
__raw_writel(cm_osc, CM_OSC); __raw_writel(cm_osc, CM_OSC);
__raw_writel(0, CM_LOCK); __raw_writel(0, CM_LOCK);
}
static void integrator_set_policy(struct cpufreq_policy *policy)
{
unsigned long cpus_allowed;
int cpu;
/*
* Save this threads cpus_allowed mask.
*/
cpus_allowed = current->cpus_allowed;
if (policy->cpu == CPUFREQ_ALL_CPUS) {
for (cpu = 0; cpu < NR_CPUS; cpu++) {
if (!cpu_online(cpu))
continue;
do_set_policy(cpu, policy);
}
} else
do_set_policy(policy->cpu, policy);
/* /*
* Restore the CPUs allowed mask. * Restore the CPUs allowed mask.
...@@ -120,23 +141,30 @@ static void integrator_setspeed(unsigned int cpu, unsigned int freq_khz) ...@@ -120,23 +141,30 @@ static void integrator_setspeed(unsigned int cpu, unsigned int freq_khz)
set_cpus_allowed(current, cpus_allowed); set_cpus_allowed(current, cpus_allowed);
} }
static struct cpufreq_policy integrator_policy = {
.cpu = 0,
.policy = CPUFREQ_POLICY_POWERSAVE,
.max_cpu_freq = 160000,
};
static struct cpufreq_driver integrator_driver = { static struct cpufreq_driver integrator_driver = {
.validate = integrator_validatespeed, .verify = integrator_verify_speed,
.setspeed = integrator_setspeed, .setpolicy = integrator_set_policy,
.sync = 1, .policy = &integrator_policy,
.cpu_min_freq = 12000,
}; };
#endif #endif
static int __init integrator_cpu_init(void) static int __init integrator_cpu_init(void)
{ {
struct cpufreq_freqs *freqs; struct cpufreq_policy *policies;
unsigned long cpus_allowed; unsigned long cpus_allowed;
int cpu; int cpu;
freqs = kmalloc(sizeof(struct cpufreq_freqs) * NR_CPUS, policies = kmalloc(sizeof(struct cpufreq_freqs) * NR_CPUS,
GFP_KERNEL); GFP_KERNEL);
if (!freqs) { if (!policies) {
printk(KERN_ERR "CPU: unable to allocate cpufreqs structure\n"); printk(KERN_ERR "CPU: unable to allocate policies structure\n");
return -ENOMEM; return -ENOMEM;
} }
...@@ -164,18 +192,20 @@ static int __init integrator_cpu_init(void) ...@@ -164,18 +192,20 @@ static int __init integrator_cpu_init(void)
vco.od = (cm_osc >> 8) & 7; vco.od = (cm_osc >> 8) & 7;
vco.vdw = cm_osc & 255; vco.vdw = cm_osc & 255;
freqs[cpu].min = 12000; policies[cpu].cpu = cpu;
freqs[cpu].max = 160000; policies[cpu].policy = CPUFREQ_POLICY_POWERSAVE,
freqs[cpu].cur = vco_to_freq(vco, 1); policies[cpu].max_cpu_freq = 160000;
policies[cpu].min =
policies[cpu].max = vco_to_freq(vco, 1);
} }
set_cpus_allowed(current, cpus_allowed); set_cpus_allowed(current, cpus_allowed);
#ifdef CONFIG_CPU_FREQ #ifdef CONFIG_CPU_FREQ
integrator_driver.freq = freqs; integrator_driver.policy = policies;
cpufreq_register(&integrator_driver); cpufreq_register(&integrator_driver);
#else #else
kfree(freqs); kfree(policies);
#endif #endif
return 0; return 0;
......
...@@ -145,7 +145,7 @@ iop310_pri_read_config(struct pci_bus *bus, unsigned int devfn, int where, ...@@ -145,7 +145,7 @@ iop310_pri_read_config(struct pci_bus *bus, unsigned int devfn, int where,
} }
static int static int
iop310_pri_write_config(struct pci_bus *bus, unsigned int devfn, int where iop310_pri_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value) int size, u32 value)
{ {
unsigned long addr = iop310_cfg_address(bus, devfn, where); unsigned long addr = iop310_cfg_address(bus, devfn, where);
...@@ -163,7 +163,7 @@ iop310_pri_write_config(struct pci_bus *bus, unsigned int devfn, int where ...@@ -163,7 +163,7 @@ iop310_pri_write_config(struct pci_bus *bus, unsigned int devfn, int where
else else
val &= ~(0xffff << where); val &= ~(0xffff << where);
*IOP310_POCCDR = val | v << where; *IOP310_POCCDR = val | value << where;
} else { } else {
asm volatile( asm volatile(
"str %1, [%2]\n\t" "str %1, [%2]\n\t"
...@@ -173,7 +173,7 @@ iop310_pri_write_config(struct pci_bus *bus, unsigned int devfn, int where ...@@ -173,7 +173,7 @@ iop310_pri_write_config(struct pci_bus *bus, unsigned int devfn, int where
"nop\n\t" "nop\n\t"
"nop\n\t" "nop\n\t"
: :
: "r" (val), "r" (addr), : "r" (value), "r" (addr),
"r" (IOP310_POCCAR), "r" (IOP310_POCCDR)); "r" (IOP310_POCCAR), "r" (IOP310_POCCDR));
} }
...@@ -246,7 +246,7 @@ iop310_sec_read_config(struct pci_bus *bus, unsigned int devfn, int where, ...@@ -246,7 +246,7 @@ iop310_sec_read_config(struct pci_bus *bus, unsigned int devfn, int where,
} }
static int static int
iop310_sec_write_config(struct pci_bus *bus, unsigned int devfn, int where iop310_sec_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value) int size, u32 value)
{ {
unsigned long addr = iop310_cfg_address(bus, devfn, where); unsigned long addr = iop310_cfg_address(bus, devfn, where);
...@@ -265,7 +265,7 @@ iop310_sec_write_config(struct pci_bus *bus, unsigned int devfn, int where ...@@ -265,7 +265,7 @@ iop310_sec_write_config(struct pci_bus *bus, unsigned int devfn, int where
else else
val &= ~(0xffff << where); val &= ~(0xffff << where);
*IOP310_SOCCDR = val | v << where; *IOP310_SOCCDR = val | value << where;
} else { } else {
asm volatile( asm volatile(
"str %1, [%2]\n\t" "str %1, [%2]\n\t"
...@@ -275,7 +275,7 @@ iop310_sec_write_config(struct pci_bus *bus, unsigned int devfn, int where ...@@ -275,7 +275,7 @@ iop310_sec_write_config(struct pci_bus *bus, unsigned int devfn, int where
"nop\n\t" "nop\n\t"
"nop\n\t" "nop\n\t"
: :
: "r" (val), "r" (addr), : "r" (value), "r" (addr),
"r" (IOP310_SOCCAR), "r" (IOP310_SOCCDR)); "r" (IOP310_SOCCAR), "r" (IOP310_SOCCDR));
} }
......
...@@ -85,7 +85,7 @@ static unsigned long iq80310_gettimeoffset (void) ...@@ -85,7 +85,7 @@ static unsigned long iq80310_gettimeoffset (void)
/* /*
* Now convert them to usec. * Now convert them to usec.
*/ */
usec = (unsigned long)(elapsed*tick)/LATCH; usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
return usec; return usec;
} }
......
...@@ -2,20 +2,17 @@ ...@@ -2,20 +2,17 @@
# Makefile for the linux kernel. # Makefile for the linux kernel.
# #
# Common support (must be linked before board specific support) # Common support
obj-y := generic.o irq.o dma.o obj-y := generic.o irq.o dma.o
obj-m := obj-m :=
obj-n := obj-n :=
obj- := obj- :=
led-y := leds.o led-y := leds.o
export-objs := dma.o generic.o pcipool.o pm.o sa1111.o sa1111-pcibuf.o \ export-objs := dma.o generic.o pcipool.o pm.o sa1111.o sa1111-pcibuf.o
usb_ctl.o usb_recv.o usb_send.o
# This needs to be cleaned up. We probably need to have SA1100 # This needs to be cleaned up. We probably need to have SA1100
# and SA1110 config symbols. # and SA1110 config symbols.
#
# We link the CPU support next, so that RAM timings can be tuned.
ifeq ($(CONFIG_CPU_FREQ),y) ifeq ($(CONFIG_CPU_FREQ),y)
obj-$(CONFIG_SA1100_ASSABET) += cpu-sa1110.o obj-$(CONFIG_SA1100_ASSABET) += cpu-sa1110.o
obj-$(CONFIG_SA1100_CERF) += cpu-sa1110.o obj-$(CONFIG_SA1100_CERF) += cpu-sa1110.o
...@@ -107,10 +104,7 @@ export-objs += yopy.o ...@@ -107,10 +104,7 @@ export-objs += yopy.o
obj-$(CONFIG_LEDS) += $(led-y) obj-$(CONFIG_LEDS) += $(led-y)
# SA1110 USB client support # SA1110 USB client support
sa1100usb_core-objs := usb_ctl.o usb_ep0.o usb_recv.o usb_send.o #obj-$(CONFIG_SA1100_USB) += usb/
obj-$(CONFIG_SA1100_USB) += sa1100usb_core.o
obj-$(CONFIG_SA1100_USB_NETLINK) += usb-eth.o
obj-$(CONFIG_SA1100_USB_CHAR) += usb-char.o
# Miscelaneous functions # Miscelaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_PM) += pm.o sleep.o
......
...@@ -302,21 +302,24 @@ static void __init assabet_map_io(void) ...@@ -302,21 +302,24 @@ static void __init assabet_map_io(void)
*/ */
neponset_map_io(); neponset_map_io();
#endif #endif
} else {
sa1100_register_uart_fns(&assabet_port_fns);
}
/* /*
* When Neponset is attached, the first UART should be * When Neponset is attached, the first UART should be
* UART3. That's what Angel is doing and many documents * UART3. That's what Angel is doing and many documents
* are stating this. * are stating this.
*
* We do the Neponset mapping even if Neponset support * We do the Neponset mapping even if Neponset support
* isn't compiled in so the user will still get something on * isn't compiled in so the user will still get something on
* the expected physical serial port. * the expected physical serial port.
*
* We no longer do this; not all boot loaders support it,
* and UART3 appears to be somewhat unreliable with blob.
*/ */
sa1100_register_uart(0, 3); sa1100_register_uart(0, 1);
sa1100_register_uart(2, 1); sa1100_register_uart(2, 3);
} else {
sa1100_register_uart_fns(&assabet_port_fns);
sa1100_register_uart(0, 1); /* com port */
sa1100_register_uart(2, 3); /* radio module */
}
} }
......
...@@ -55,8 +55,8 @@ unsigned int sa11x0_freq_to_ppcr(unsigned int khz) ...@@ -55,8 +55,8 @@ unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
khz /= 100; khz /= 100;
for (i = 0; i < ARRAY_SIZE(cclk_frequency_100khz); i--) for (i = NR_FREQS - 1; i > 0; i--)
if (cclk_frequency_100khz[i] >= khz) if (cclk_frequency_100khz[i] <= khz)
break; break;
return i; return i;
......
...@@ -193,20 +193,30 @@ static int neponset_resume(struct device *dev, u32 level) ...@@ -193,20 +193,30 @@ static int neponset_resume(struct device *dev, u32 level)
} }
static struct device_driver neponset_device_driver = { static struct device_driver neponset_device_driver = {
.name = "NEPONSET",
.bus = &system_bus_type,
.suspend = neponset_suspend, .suspend = neponset_suspend,
.resume = neponset_resume, .resume = neponset_resume,
}; };
static struct device neponset_device = { static struct sys_device neponset_device = {
.name = "NEPONSET",
.id = 0,
.root = NULL,
.dev = {
.name = "Neponset", .name = "Neponset",
.bus_id = "neponset", .bus_id = "neponset",
.bus = &system_bus_type,
.driver = &neponset_device_driver, .driver = &neponset_device_driver,
},
}; };
static int __init neponset_init(void) static int __init neponset_init(void)
{ {
int ret; int ret;
driver_register(&neponset_device_driver);
/* /*
* The Neponset is only present on the Assabet machine type. * The Neponset is only present on the Assabet machine type.
*/ */
...@@ -231,7 +241,7 @@ static int __init neponset_init(void) ...@@ -231,7 +241,7 @@ static int __init neponset_init(void)
return -ENODEV; return -ENODEV;
} }
ret = register_sys_device(&neponset_device); ret = sys_device_register(&neponset_device);
if (ret) if (ret)
return ret; return ret;
...@@ -256,7 +266,7 @@ static int __init neponset_init(void) ...@@ -256,7 +266,7 @@ static int __init neponset_init(void)
return sa1111_init(0x40000000, IRQ_NEPONSET_SA1111); return sa1111_init(0x40000000, IRQ_NEPONSET_SA1111);
} }
arch_initcall(neponset_init); subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = { static struct map_desc neponset_io_desc[] __initdata = {
/* virtual physical length type */ /* virtual physical length type */
......
This diff is collapsed.
...@@ -16,8 +16,10 @@ ...@@ -16,8 +16,10 @@
#include <linux/bitops.h> #include <linux/bitops.h>
#include <linux/init.h> #include <linux/init.h>
#include <asm/cacheflush.h>
#include <asm/pgalloc.h> #include <asm/pgalloc.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include "fault.h" #include "fault.h"
......
...@@ -519,6 +519,10 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) ...@@ -519,6 +519,10 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
bdata->node_boot_start >> PAGE_SHIFT, zhole_size); bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
} }
#ifndef CONFIG_DISCONTIGMEM
mem_map = contig_page_data.node_mem_map;
#endif
/* /*
* finish off the bad pages once * finish off the bad pages once
* the mem_map is initialised * the mem_map is initialised
...@@ -559,7 +563,9 @@ void __init mem_init(void) ...@@ -559,7 +563,9 @@ void __init mem_init(void)
initpages = &__init_end - &__init_begin; initpages = &__init_end - &__init_begin;
high_memory = (void *)__va(meminfo.end); high_memory = (void *)__va(meminfo.end);
#ifndef CONFIG_DISCONTIGMEM
max_mapnr = virt_to_page(high_memory) - mem_map; max_mapnr = virt_to_page(high_memory) - mem_map;
#endif
/* /*
* We may have non-contiguous memory. * We may have non-contiguous memory.
......
...@@ -15,9 +15,11 @@ ...@@ -15,9 +15,11 @@
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <asm/page.h> #include <asm/page.h>
#include <asm/pgalloc.h> #include <asm/pgalloc.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/tlbflush.h>
/* /*
* 0xffff8000 to 0xffffffff is reserved for any ARM architecture * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/bootmem.h> #include <linux/bootmem.h>
#include <linux/highmem.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/pgalloc.h> #include <asm/pgalloc.h>
...@@ -20,6 +21,7 @@ ...@@ -20,6 +21,7 @@
#include <asm/rmap.h> #include <asm/rmap.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/tlbflush.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
...@@ -213,6 +215,50 @@ static inline void clear_mapping(unsigned long virt) ...@@ -213,6 +215,50 @@ static inline void clear_mapping(unsigned long virt)
pmd_clear(pmd_offset(pgd_offset_k(virt), virt)); pmd_clear(pmd_offset(pgd_offset_k(virt), virt));
} }
struct mem_types {
unsigned int prot_pte;
unsigned int prot_sect;
unsigned int domain;
};
static struct mem_types mem_types[] __initdata = {
[MT_DEVICE] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_IO,
},
[MT_CACHECLEAN] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_CACHEABLE | L_PTE_BUFFERABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_CACHEABLE |
PMD_SECT_BUFFERABLE,
.domain = DOMAIN_KERNEL,
},
[MT_MINICLEAN] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_CACHEABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_CACHEABLE,
.domain = DOMAIN_KERNEL,
},
[MT_VECTORS] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_CACHEABLE | L_PTE_BUFFERABLE |
L_PTE_EXEC,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_CACHEABLE |
PMD_SECT_BUFFERABLE,
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_CACHEABLE | L_PTE_BUFFERABLE |
L_PTE_EXEC | L_PTE_WRITE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_CACHEABLE |
PMD_SECT_BUFFERABLE | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
}
};
/* /*
* Create the page directory entries and any necessary * Create the page directory entries and any necessary
* page tables for the mapping specified by `md'. We * page tables for the mapping specified by `md'. We
...@@ -232,42 +278,9 @@ static void __init create_mapping(struct map_desc *md) ...@@ -232,42 +278,9 @@ static void __init create_mapping(struct map_desc *md)
return; return;
} }
prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY; domain = mem_types[md->type].domain;
prot_sect = PMD_TYPE_SECT; prot_pte = mem_types[md->type].prot_pte;
prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
switch (md->type) {
case MT_DEVICE:
prot_pte |= L_PTE_WRITE;
prot_sect |= PMD_SECT_AP_WRITE;
domain = DOMAIN_IO;
break;
case MT_CACHECLEAN:
prot_pte |= L_PTE_CACHEABLE | L_PTE_BUFFERABLE;
prot_sect |= PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE;
domain = DOMAIN_KERNEL;
break;
case MT_MINICLEAN:
prot_pte |= L_PTE_CACHEABLE;
prot_sect |= PMD_SECT_CACHEABLE;
domain = DOMAIN_KERNEL;
break;
case MT_VECTORS:
prot_pte |= L_PTE_EXEC | L_PTE_CACHEABLE | L_PTE_BUFFERABLE;
prot_sect |= PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE;
domain = DOMAIN_USER;
break;
case MT_MEMORY:
prot_pte |= L_PTE_WRITE | L_PTE_EXEC | L_PTE_CACHEABLE | L_PTE_BUFFERABLE;
prot_sect |= PMD_SECT_AP_WRITE | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE;
domain = DOMAIN_KERNEL;
break;
}
prot_sect |= PMD_DOMAIN(domain);
virt = md->virtual; virt = md->virtual;
off = md->physical - virt; off = md->physical - virt;
......
...@@ -10,8 +10,10 @@ ...@@ -10,8 +10,10 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <asm/cacheflush.h>
#include <asm/pgalloc.h> #include <asm/pgalloc.h>
#include <asm/proc-fns.h> #include <asm/proc-fns.h>
#include <asm/tlbflush.h>
#ifndef MULTI_CPU #ifndef MULTI_CPU
EXPORT_SYMBOL(cpu_cache_clean_invalidate_all); EXPORT_SYMBOL(cpu_cache_clean_invalidate_all);
...@@ -29,11 +31,11 @@ EXPORT_SYMBOL(cpu_set_pte); ...@@ -29,11 +31,11 @@ EXPORT_SYMBOL(cpu_set_pte);
EXPORT_SYMBOL(processor); EXPORT_SYMBOL(processor);
#endif #endif
#ifndef MULTI_TLB /*
EXPORT_SYMBOL_NOVERS(__cpu_flush_kern_tlb_all); * No module should need to touch the TLB (and currently
EXPORT_SYMBOL_NOVERS(__cpu_flush_user_tlb_mm); * no modules do. We export this for "loadkernel" support
EXPORT_SYMBOL_NOVERS(__cpu_flush_user_tlb_range); * (booting a new kernel from within a running kernel.)
EXPORT_SYMBOL_NOVERS(__cpu_flush_user_tlb_page); */
#else #ifdef MULTI_TLB
EXPORT_SYMBOL(cpu_tlb); EXPORT_SYMBOL(cpu_tlb);
#endif #endif
...@@ -13,31 +13,10 @@ ...@@ -13,31 +13,10 @@
*/ */
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/constants.h> #include <asm/constants.h>
#include <asm/tlbflush.h>
#include "proc-macros.S" #include "proc-macros.S"
.align 5 .align 5
/*
* v3_flush_user_tlb_mm(mm)
*
* Invalidate all TLB entries in a particular address space
*
* - mm - mm_struct describing address space
*/
ENTRY(v3_flush_user_tlb_mm)
act_mm r1 @ get current->active_mm
teq r0, r1 @ == mm ?
movne pc, lr @ no, we dont do anything
/*
* v3_flush_kern_tlb_all()
*
* Invalidate the entire TLB
*/
ENTRY(v3_flush_kern_tlb_all)
mov r0, #0
mcr p15, 0, r0, c5, c0, 0 @ invalidate TLB
mov pc, lr
/* /*
* v3_flush_user_tlb_range(start, end, mm) * v3_flush_user_tlb_range(start, end, mm)
* *
...@@ -62,32 +41,11 @@ ENTRY(v3_flush_kern_tlb_range) ...@@ -62,32 +41,11 @@ ENTRY(v3_flush_kern_tlb_range)
blo 1b blo 1b
mov pc, lr mov pc, lr
/*
* v3_flush_user_tlb_page(vaddr,vma)
*
* Invalidate the specified page in the specified address space.
*
* - vaddr - virtual address (may not be aligned)
* - vma - vma_struct describing address range
*/
.align 5
ENTRY(v3_flush_user_tlb_page)
vma_vm_mm r2, r1 @ get vma->vm_mm
act_mm r3 @ get current->active_mm
teq r2, r3 @ equal
movne pc, lr @ no
ENTRY(v3_flush_kern_tlb_page)
mcr p15, 0, r0, c6, c0, 0 @ invalidate TLB entry
mov pc, lr
.section ".text.init", #alloc, #execinstr .section ".text.init", #alloc, #execinstr
.type v3_tlb_fns, #object .type v3_tlb_fns, #object
ENTRY(v3_tlb_fns) ENTRY(v3_tlb_fns)
.long v3_flush_kern_tlb_all
.long v3_flush_user_tlb_mm
.long v3_flush_user_tlb_range .long v3_flush_user_tlb_range
.long v3_flush_user_tlb_page
.long v3_flush_kern_tlb_range .long v3_flush_kern_tlb_range
.long v3_flush_kern_tlb_page .long v3_tlb_flags
.size v3_tlb_fns, . - v3_tlb_fns .size v3_tlb_fns, . - v3_tlb_fns
...@@ -14,31 +14,10 @@ ...@@ -14,31 +14,10 @@
*/ */
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/constants.h> #include <asm/constants.h>
#include <asm/tlbflush.h>
#include "proc-macros.S" #include "proc-macros.S"
.align 5 .align 5
/*
* v4_flush_user_tlb_mm(mm)
*
* Invalidate all TLB entries in a particular address space
*
* - mm - mm_struct describing address space
*/
ENTRY(v4_flush_user_tlb_mm)
act_mm r1 @ get current->active_mm
teq r0, r1 @ == mm ?
movne pc, lr @ no, we dont do anything
/*
* v4_flush_kern_tlb_all()
*
* Invalidate the entire TLB
*/
ENTRY(v4_flush_kern_tlb_all)
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mov pc, lr
/* /*
* v4_flush_user_tlb_range(start, end, mm) * v4_flush_user_tlb_range(start, end, mm)
* *
...@@ -64,25 +43,6 @@ ENTRY(v4_flush_user_tlb_range) ...@@ -64,25 +43,6 @@ ENTRY(v4_flush_user_tlb_range)
blo 1b blo 1b
mov pc, lr mov pc, lr
/*
* v4_flush_user_tlb_page(vaddr,vma)
*
* Invalidate the specified page in the specified address space.
*
* - vaddr - virtual address (may not be aligned)
* - vma - vma_struct describing address range
*/
.align 5
ENTRY(v4_flush_user_tlb_page)
vma_vm_mm r2, r1 @ get vma->vm_mm
act_mm r3 @ get current->active_mm
teq r2, r3 @ equal
movne pc, lr @ no
vma_vm_flags r2, r1
.v4_flush_kern_tlb_page:
mcr p15, 0, r0, c8, c7, 1 @ invalidate TLB entry
mov pc, lr
/* /*
* v4_flush_kerm_tlb_range(start, end) * v4_flush_kerm_tlb_range(start, end)
* *
...@@ -95,27 +55,11 @@ ENTRY(v4_flush_user_tlb_page) ...@@ -95,27 +55,11 @@ ENTRY(v4_flush_user_tlb_page)
.globl v4_flush_kern_tlb_range .globl v4_flush_kern_tlb_range
.equ v4_flush_kern_tlb_range, .v4_flush_kern_tlb_range .equ v4_flush_kern_tlb_range, .v4_flush_kern_tlb_range
/*
* v4_flush_kern_tlb_page(kaddr)
*
* Invalidate the TLB entry for the specified page. The address
* will be in the kernels virtual memory space. Current uses
* only require the D-TLB to be invalidated.
*
* - kaddr - Kernel virtual memory address
*/
.globl v4_flush_kern_tlb_page
.equ v4_flush_kern_tlb_page, .v4_flush_kern_tlb_page
.section ".text.init", #alloc, #execinstr .section ".text.init", #alloc, #execinstr
.type v4_tlb_fns, #object .type v4_tlb_fns, #object
ENTRY(v4_tlb_fns) ENTRY(v4_tlb_fns)
.long v4_flush_kern_tlb_all
.long v4_flush_user_tlb_mm
.long v4_flush_user_tlb_range .long v4_flush_user_tlb_range
.long v4_flush_user_tlb_page
.long v4_flush_kern_tlb_range .long v4_flush_kern_tlb_range
.long v4_flush_kern_tlb_page .long v4_tlb_flags
.size v4_tlb_fns, . - v4_tlb_fns .size v4_tlb_fns, . - v4_tlb_fns
...@@ -14,34 +14,10 @@ ...@@ -14,34 +14,10 @@
*/ */
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/constants.h> #include <asm/constants.h>
#include <asm/tlbflush.h>
#include "proc-macros.S" #include "proc-macros.S"
.align 5 .align 5
/*
* v4wb_flush_user_tlb_mm(mm)
*
* Invalidate all TLB entries in a particular address space
*
* - mm - mm_struct describing address space
*/
ENTRY(v4wb_flush_user_tlb_mm)
ENTRY(v4wbi_flush_user_tlb_mm)
act_mm r1 @ get current->active_mm
teq r0, r1 @ == mm ?
movne pc, lr @ no, we dont do anything
/*
* v4wb_flush_tlb_all()
*
* Invalidate the entire TLB
*/
ENTRY(v4wb_flush_kern_tlb_all)
ENTRY(v4wbi_flush_kern_tlb_all)
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mov pc, lr
/* /*
* v4wb_flush_user_tlb_range(start, end, mm) * v4wb_flush_user_tlb_range(start, end, mm)
* *
...@@ -69,28 +45,6 @@ ENTRY(v4wb_flush_user_tlb_range) ...@@ -69,28 +45,6 @@ ENTRY(v4wb_flush_user_tlb_range)
blo 1b blo 1b
mov pc, lr mov pc, lr
/*
* v4wb_flush_user_tlb_page(vaddr,vma)
*
* Invalidate the specified page in the specified address space.
*
* - vaddr - virtual address (may not be aligned)
* - vma - vma_struct describing address range
*/
.align 5
ENTRY(v4wb_flush_user_tlb_page)
vma_vm_mm r2, r1 @ get vma->vm_mm
act_mm r3 @ get current->active_mm
teq r2, r3 @ equal
movne pc, lr @ no
vma_vm_flags r2, r1
mov r3, #0
mcr p15, 0, r3, c7, c10, 4 @ drain WB
tst r2, #VM_EXEC
mcrne p15, 0, r3, c8, c5, 0 @ invalidate I TLB
mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
mov pc, lr
/* /*
* v4_flush_kerm_tlb_range(start, end) * v4_flush_kerm_tlb_range(start, end)
* *
...@@ -112,20 +66,6 @@ ENTRY(v4wb_flush_kern_tlb_range) ...@@ -112,20 +66,6 @@ ENTRY(v4wb_flush_kern_tlb_range)
blo 1b blo 1b
mov pc, lr mov pc, lr
/*
* v4_flush_kern_tlb_page(kaddr)
*
* Invalidate the TLB entry for the specified page. The address
* will be in the kernels virtual memory space. Current uses
* only require the D-TLB to be invalidated.
*
* - kaddr - Kernel virtual memory address
*/
ENTRY(v4wb_flush_kern_tlb_page)
mcr p15, 0, r3, c8, c5, 0 @ invalidate I TLB
mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
mov pc, lr
/* /*
* These two are optimised for ARM920, ARM922, ARM926, Xscale * These two are optimised for ARM920, ARM922, ARM926, Xscale
*/ */
...@@ -158,28 +98,6 @@ ENTRY(v4wbi_flush_user_tlb_range) ...@@ -158,28 +98,6 @@ ENTRY(v4wbi_flush_user_tlb_range)
blo 1b blo 1b
mov pc, lr mov pc, lr
/*
* v4wb_flush_tlb_page(vaddr,vma)
*
* Invalidate the specified page in the specified address space.
*
* - vaddr - virtual address (may not be aligned)
* - vma - vma_struct describing address range
*/
.align 5
ENTRY(v4wbi_flush_user_tlb_page)
vma_vm_mm r2, r1 @ get vma->vm_mm
act_mm r3 @ get current->active_mm
teq r2, r3 @ equal
movne pc, lr @ no
vma_vm_flags r2, r1
mov r3, #0
mcr p15, 0, r3, c7, c10, 4 @ drain WB
tst r2, #VM_EXEC
mcrne p15, 0, r0, c8, c5, 1 @ invalidate I TLB entry
mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
mov pc, lr
ENTRY(v4wbi_flush_kern_tlb_range) ENTRY(v4wbi_flush_kern_tlb_range)
mov r3, #0 mov r3, #0
mcr p15, 0, r3, c7, c10, 4 @ drain WB mcr p15, 0, r3, c7, c10, 4 @ drain WB
...@@ -192,29 +110,18 @@ ENTRY(v4wbi_flush_kern_tlb_range) ...@@ -192,29 +110,18 @@ ENTRY(v4wbi_flush_kern_tlb_range)
blo 1b blo 1b
mov pc, lr mov pc, lr
ENTRY(v4wbi_flush_kern_tlb_page)
mcr p15, 0, r0, c8, c5, 1 @ invalidate I TLB entry
mcr p15, 0, r0, c8, c6, 1 @ invalidate D TLB entry
mov pc, lr
.section ".text.init", #alloc, #execinstr .section ".text.init", #alloc, #execinstr
.type v4wb_tlb_fns, #object .type v4wb_tlb_fns, #object
ENTRY(v4wb_tlb_fns) ENTRY(v4wb_tlb_fns)
.long v4wb_flush_kern_tlb_all
.long v4wb_flush_user_tlb_mm
.long v4wb_flush_user_tlb_range .long v4wb_flush_user_tlb_range
.long v4wb_flush_user_tlb_page
.long v4wb_flush_kern_tlb_range .long v4wb_flush_kern_tlb_range
.long v4wb_flush_kern_tlb_page .long v4wb_tlb_flags
.size v4wb_tlb_fns, . - v4wb_tlb_fns .size v4wb_tlb_fns, . - v4wb_tlb_fns
.type v4wbi_tlb_fns, #object .type v4wbi_tlb_fns, #object
ENTRY(v4wbi_tlb_fns) ENTRY(v4wbi_tlb_fns)
.long v4wbi_flush_kern_tlb_all
.long v4wbi_flush_user_tlb_mm
.long v4wbi_flush_user_tlb_range .long v4wbi_flush_user_tlb_range
.long v4wbi_flush_user_tlb_page
.long v4wbi_flush_kern_tlb_range .long v4wbi_flush_kern_tlb_range
.long v4wbi_flush_kern_tlb_page .long v4wbi_tlb_flags
.size v4wbi_tlb_fns, . - v4wbi_tlb_fns .size v4wbi_tlb_fns, . - v4wbi_tlb_fns
...@@ -4,13 +4,10 @@ ...@@ -4,13 +4,10 @@
#ifdef CONFIG_ROM_KERNEL #ifdef CONFIG_ROM_KERNEL
#define DATAADDR 0x02080000
#define TEXTADDR 0x03800000
#include "vmlinux-armo-rom.lds.in" #include "vmlinux-armo-rom.lds.in"
#else #else
#define TEXTADDR 0x02080000
#include "vmlinux-armo.lds.in" #include "vmlinux-armo.lds.in"
#endif #endif
...@@ -19,7 +16,6 @@ ...@@ -19,7 +16,6 @@
#ifdef CONFIG_CPU_32 #ifdef CONFIG_CPU_32
#define TEXTADDR 0xC0008000
#include "vmlinux-armv.lds.in" #include "vmlinux-armv.lds.in"
#endif #endif
...@@ -345,8 +345,6 @@ static void fd_select_drive(int drive); ...@@ -345,8 +345,6 @@ static void fd_select_drive(int drive);
static void fd_deselect(void); static void fd_deselect(void);
static void fd_motor_off_timer(unsigned long dummy); static void fd_motor_off_timer(unsigned long dummy);
static void check_change(unsigned long dummy); static void check_change(unsigned long dummy);
static __inline__ void set_head_settle_flag(void);
static __inline__ int get_head_settle_flag(void);
static void floppy_irqconsequencehandler(void); static void floppy_irqconsequencehandler(void);
static void fd_error(void); static void fd_error(void);
static void do_fd_action(int drive); static void do_fd_action(int drive);
...@@ -363,7 +361,6 @@ static void fd_times_out(unsigned long dummy); ...@@ -363,7 +361,6 @@ static void fd_times_out(unsigned long dummy);
static void finish_fdc(void); static void finish_fdc(void);
static void finish_fdc_done(int dummy); static void finish_fdc_done(int dummy);
static void floppy_off(unsigned int nr); static void floppy_off(unsigned int nr);
static __inline__ void copy_buffer(void *from, void *to);
static void setup_req_params(int drive); static void setup_req_params(int drive);
static void redo_fd_request(void); static void redo_fd_request(void);
static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int
...@@ -543,12 +540,12 @@ static void check_change(unsigned long dummy) ...@@ -543,12 +540,12 @@ static void check_change(unsigned long dummy)
* seek operation, because we don't use seeks with verify. * seek operation, because we don't use seeks with verify.
*/ */
static __inline__ void set_head_settle_flag(void) static inline void set_head_settle_flag(void)
{ {
HeadSettleFlag = FDC1772CMDADD_E; HeadSettleFlag = FDC1772CMDADD_E;
} }
static __inline__ int get_head_settle_flag(void) static inline int get_head_settle_flag(void)
{ {
int tmp = HeadSettleFlag; int tmp = HeadSettleFlag;
HeadSettleFlag = 0; HeadSettleFlag = 0;
...@@ -560,6 +557,15 @@ static __inline__ int get_head_settle_flag(void) ...@@ -560,6 +557,15 @@ static __inline__ int get_head_settle_flag(void)
/* General Interrupt Handling */ /* General Interrupt Handling */
static inline void copy_buffer(void *from, void *to)
{
ulong *p1 = (ulong *) from, *p2 = (ulong *) to;
int cnt;
for (cnt = 512 / 4; cnt; cnt--)
*p2++ = *p1++;
}
static void (*FloppyIRQHandler) (int status) = NULL; static void (*FloppyIRQHandler) (int status) = NULL;
static void floppy_irqconsequencehandler(void) static void floppy_irqconsequencehandler(void)
...@@ -1175,16 +1181,6 @@ static int floppy_revalidate(dev_t dev) ...@@ -1175,16 +1181,6 @@ static int floppy_revalidate(dev_t dev)
return 0; return 0;
} }
static __inline__ void copy_buffer(void *from, void *to)
{
ulong *p1 = (ulong *) from, *p2 = (ulong *) to;
int cnt;
for (cnt = 512 / 4; cnt; cnt--)
*p2++ = *p1++;
}
/* This sets up the global variables describing the current request. */ /* This sets up the global variables describing the current request. */
static void setup_req_params(int drive) static void setup_req_params(int drive)
......
...@@ -3,17 +3,10 @@ ...@@ -3,17 +3,10 @@
# #
# All the objects that export symbols. # All the objects that export symbols.
obj-arc := keyb_arc.o obj-arc := keyb_arc.o defkeymap-acorn.o
obj-rpc := keyb_ps2.o
obj-clps7500 := keyb_ps2.o defkeymap-acorn.o
obj-$(CONFIG_RPCMOUSE) += mouse_rpc.o
obj-$(CONFIG_ATOMWIDE_SERIAL) += serial-atomwide.o
obj-$(CONFIG_DUALSP_SERIAL) += serial-dualsp.o
obj-$(CONFIG_ARCH_ACORN) += defkeymap-acorn.o i2c.o pcf8583.o
obj-$(CONFIG_L7200_KEYB) += defkeymap-l7200.o keyb_l7200.o
# Do the i2c and rtc last obj-$(CONFIG_ARCH_ACORN) += i2c.o pcf8583.o
obj-$(CONFIG_L7200_KEYB) += defkeymap-l7200.o keyb_l7200.o
obj-y += $(obj-$(MACHINE)) obj-y += $(obj-$(MACHINE))
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
......
...@@ -132,7 +132,7 @@ static int k_set_rtc_time(void) ...@@ -132,7 +132,7 @@ static int k_set_rtc_time(void)
if (rtc_command(RTC_GETDATETIME, &old_rtctm)) if (rtc_command(RTC_GETDATETIME, &old_rtctm))
return 0; return 0;
new_rtctm.cs = xtime.tv_usec / 10000; new_rtctm.cs = xtime.tv_nsec / 10000000;
new_rtctm.secs = nowtime % 60; nowtime /= 60; new_rtctm.secs = nowtime % 60; nowtime /= 60;
new_rtctm.mins = nowtime % 60; nowtime /= 60; new_rtctm.mins = nowtime % 60; nowtime /= 60;
new_rtctm.hours = nowtime % 24; new_rtctm.hours = nowtime % 24;
...@@ -283,7 +283,7 @@ static int ioc_client_reg(struct i2c_client *client) ...@@ -283,7 +283,7 @@ static int ioc_client_reg(struct i2c_client *client)
rtc_client = client; rtc_client = client;
get_rtc_time(&rtctm, &year); get_rtc_time(&rtctm, &year);
xtime.tv_usec = rtctm.cs * 10000; xtime.tv_nsec = rtctm.cs * 10000000;
xtime.tv_sec = mktime(year, rtctm.mon, rtctm.mday, xtime.tv_sec = mktime(year, rtctm.mon, rtctm.mday,
rtctm.hours, rtctm.mins, rtctm.secs); rtctm.hours, rtctm.mins, rtctm.secs);
set_rtc = k_set_rtc_time; set_rtc = k_set_rtc_time;
......
This diff is collapsed.
/*
* linux/drivers/char/mouse_rpc.c
*
* Copyright (C) 1996-1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This handles the Acorn RiscPCs mouse. We basically have a couple
* of hardware registers that track the sensor count for the X-Y movement
* and another register holding the button state. On every VSYNC interrupt
* we read the complete state and then work out if something has changed.
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/iomd.h>
#include "../../char/busmouse.h"
static short old_x, old_y, old_b;
static int mousedev;
void
mouse_rpc_irq(int irq, void *dev_id, struct pt_regs *regs)
{
short x, y, dx, dy;
int buttons;
x = (short)iomd_readl(IOMD_MOUSEX);
y = (short)iomd_readl(IOMD_MOUSEY);
buttons = (__raw_readl(0xe0310000) >> 4) & 7;
dx = x - old_x;
old_x = x;
dy = y - old_y;
old_y = y;
if (dx || dy || buttons != old_b) {
busmouse_add_movementbuttons(mousedev, dx, dy, buttons);
old_b = buttons;
}
}
static struct busmouse rpcmouse = {
6, "arcmouse", NULL, NULL, NULL, 7
};
static int __init mouse_rpc_init(void)
{
mousedev = register_busmouse(&rpcmouse);
if (mousedev < 0)
printk("rpcmouse: could not register mouse driver\n");
else {
old_x = (short)iomd_readl(IOMD_MOUSEX);
old_y = (short)iomd_readl(IOMD_MOUSEY);
old_b = (__raw_readl(0xe0310000) >> 4) & 7;
if (request_irq(IRQ_VSYNCPULSE, mouse_rpc_irq, SA_SHIRQ, "mouse", &mousedev)) {
printk("rpcmouse: unable to allocate VSYNC interrupt\n");
unregister_busmouse(mousedev);
mousedev = -1;
}
}
return mousedev >= 0 ? 0 : -ENODEV;
}
static void __exit mouse_rpc_exit(void)
{
if (mousedev >= 0) {
unregister_busmouse(mousedev);
free_irq(IRQ_VSYNCPULSE, &mousedev);
}
}
module_init(mouse_rpc_init);
module_exit(mouse_rpc_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("RiscPC mouse driver");
MODULE_LICENSE("GPL");
/*
* linux/arch/arm/drivers/char/serial-atomwide.c
*
* Copyright (C) 1996 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 02-05-1996 RMK Created
* 07-05-1996 RMK Altered for greater number of cards.
* 30-07-1996 RMK Now uses generic card code.
*/
#define MY_CARD_LIST { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL }
#define MY_NUMPORTS 3
#define MY_BAUD_BASE (7372800 / 16)
#define MY_BASE_ADDRESS(ec) \
ecard_address ((ec), ECARD_IOC, ECARD_SLOW) + (0x2000 >> 2)
#define MY_PORT_ADDRESS(port,cardaddr) \
((cardaddr) + 0x200 - (port) * 0x100)
#include "serial-card.c"
/*
* linux/drivers/acorn/char/serial-card.c
*
* Copyright (C) 1996-1999 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* A generic handler of serial expansion cards that use 16550s or
* the like.
*
* Definitions:
* MY_PRODS Product numbers to identify this card by
* MY_MANUS Manufacturer numbers to identify this card by
* MY_NUMPORTS Number of ports per card
* MY_BAUD_BASE Baud base for the card
* MY_INIT Initialisation routine name
* MY_BASE_ADDRESS(ec) Return base address for ports
* MY_PORT_ADDRESS
* (port,cardaddr) Return address for port using base address
* from above.
*
* Changelog:
* 30-07-1996 RMK Created
* 22-04-1998 RMK Removed old register_pre_init_serial
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/serial.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/ecard.h>
#include <asm/string.h>
#ifndef NUM_SERIALS
#define NUM_SERIALS MY_NUMPORTS * MAX_ECARDS
#endif
static int serial_ports[NUM_SERIALS];
static int serial_pcount;
static int serial_addr[NUM_SERIALS];
static struct expansion_card *expcard[MAX_ECARDS];
static const card_ids serial_cids[] = { MY_CARD_LIST, { 0xffff, 0xffff } };
static inline int serial_register_onedev (unsigned long port, int irq)
{
struct serial_struct req;
memset(&req, 0, sizeof(req));
req.baud_base = MY_BAUD_BASE;
req.irq = irq;
req.port = port;
req.flags = 0;
return register_serial(&req);
}
static int __init serial_card_init(void)
{
int card = 0;
ecard_startfind ();
do {
struct expansion_card *ec;
unsigned long cardaddr;
int port;
ec = ecard_find (0, serial_cids);
if (!ec)
break;
cardaddr = MY_BASE_ADDRESS(ec);
for (port = 0; port < MY_NUMPORTS; port ++) {
unsigned long address;
int line;
address = MY_PORT_ADDRESS(port, cardaddr);
line = serial_register_onedev (address, ec->irq);
if (line < 0)
break;
serial_ports[serial_pcount] = line;
serial_addr[serial_pcount] = address;
serial_pcount += 1;
}
if (port) {
ecard_claim (ec);
expcard[card] = ec;
} else
break;
} while (++card < MAX_ECARDS);
return card ? 0 : -ENODEV;
}
static void __exit serial_card_exit(void)
{
int i;
for (i = 0; i < serial_pcount; i++) {
unregister_serial(serial_ports[i]);
release_region(serial_addr[i], 8);
}
for (i = 0; i < MAX_ECARDS; i++)
if (expcard[i])
ecard_release (expcard[i]);
}
MODULE_AUTHOR("Russell King");
MODULE_LICENSE("GPL");
module_init(serial_card_init);
module_exit(serial_card_exit);
...@@ -43,6 +43,7 @@ ...@@ -43,6 +43,7 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/device.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/etherdevice.h> #include <linux/etherdevice.h>
...@@ -80,11 +81,6 @@ static char version[] __initdata = "ether1 ethernet driver (c) 2000 Russell King ...@@ -80,11 +81,6 @@ static char version[] __initdata = "ether1 ethernet driver (c) 2000 Russell King
#define BUS_16 16 #define BUS_16 16
#define BUS_8 8 #define BUS_8 8
static const card_ids __init ether1_cids[] = {
{ MANU_ACORN, PROD_ACORN_ETHER1 },
{ 0xffff, 0xffff }
};
/* ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */
#define DISABLEIRQS 1 #define DISABLEIRQS 1
...@@ -647,6 +643,12 @@ ether1_open (struct net_device *dev) ...@@ -647,6 +643,12 @@ ether1_open (struct net_device *dev)
{ {
struct ether1_priv *priv = (struct ether1_priv *)dev->priv; struct ether1_priv *priv = (struct ether1_priv *)dev->priv;
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev)) if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev))
return -EAGAIN; return -EAGAIN;
...@@ -971,6 +973,23 @@ ether1_getstats (struct net_device *dev) ...@@ -971,6 +973,23 @@ ether1_getstats (struct net_device *dev)
return &priv->stats; return &priv->stats;
} }
static int
ether1_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
if (netif_running(dev))
return -EBUSY;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
/*
* We'll set the MAC address on the chip when we open it.
*/
return 0;
}
/* /*
* Set or clear the multicast filter for this adaptor. * Set or clear the multicast filter for this adaptor.
* num_addrs == -1 Promiscuous mode, receive all packets. * num_addrs == -1 Promiscuous mode, receive all packets.
...@@ -993,19 +1012,22 @@ static void __init ether1_banner(void) ...@@ -993,19 +1012,22 @@ static void __init ether1_banner(void)
printk(KERN_INFO "%s", version); printk(KERN_INFO "%s", version);
} }
static struct net_device * __init ether1_init_one(struct expansion_card *ec) static int __devinit
ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
{ {
struct net_device *dev; struct net_device *dev;
struct ether1_priv *priv; struct ether1_priv *priv;
int i; int i, ret = 0;
ether1_banner(); ether1_banner();
ecard_claim(ec); ecard_claim(ec);
dev = init_etherdev(NULL, sizeof(struct ether1_priv)); dev = init_etherdev(NULL, sizeof(struct ether1_priv));
if (!dev) if (!dev) {
ret = -ENOMEM;
goto out; goto out;
}
SET_MODULE_OWNER(dev); SET_MODULE_OWNER(dev);
...@@ -1019,8 +1041,10 @@ static struct net_device * __init ether1_init_one(struct expansion_card *ec) ...@@ -1019,8 +1041,10 @@ static struct net_device * __init ether1_init_one(struct expansion_card *ec)
request_region(dev->base_addr + 0x800, 4096, dev->name); request_region(dev->base_addr + 0x800, 4096, dev->name);
priv = (struct ether1_priv *)dev->priv; priv = (struct ether1_priv *)dev->priv;
if ((priv->bus_type = ether1_reset(dev)) == 0) if ((priv->bus_type = ether1_reset(dev)) == 0) {
ret = -ENODEV;
goto release; goto release;
}
printk(KERN_INFO "%s: ether1 in slot %d, ", printk(KERN_INFO "%s: ether1 in slot %d, ",
dev->name, ec->slot_no); dev->name, ec->slot_no);
...@@ -1030,16 +1054,21 @@ static struct net_device * __init ether1_init_one(struct expansion_card *ec) ...@@ -1030,16 +1054,21 @@ static struct net_device * __init ether1_init_one(struct expansion_card *ec)
printk ("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); printk ("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
} }
if (ether1_init_2(dev)) if (ether1_init_2(dev)) {
ret = -ENODEV;
goto release; goto release;
}
dev->open = ether1_open; dev->open = ether1_open;
dev->stop = ether1_close; dev->stop = ether1_close;
dev->hard_start_xmit = ether1_sendpacket; dev->hard_start_xmit = ether1_sendpacket;
dev->get_stats = ether1_getstats; dev->get_stats = ether1_getstats;
dev->set_multicast_list = ether1_setmulticastlist; dev->set_multicast_list = ether1_setmulticastlist;
dev->set_mac_address = ether1_set_mac_address;
dev->tx_timeout = ether1_timeout; dev->tx_timeout = ether1_timeout;
dev->watchdog_timeo = 5 * HZ / 100; dev->watchdog_timeo = 5 * HZ / 100;
ecard_set_drvdata(ec, dev);
return 0; return 0;
release: release:
...@@ -1049,55 +1078,46 @@ static struct net_device * __init ether1_init_one(struct expansion_card *ec) ...@@ -1049,55 +1078,46 @@ static struct net_device * __init ether1_init_one(struct expansion_card *ec)
kfree(dev); kfree(dev);
out: out:
ecard_release(ec); ecard_release(ec);
return dev; return ret;
} }
static struct expansion_card *e_card[MAX_ECARDS]; static void __devexit ether1_remove(struct expansion_card *ec)
static struct net_device *e_dev[MAX_ECARDS];
static int __init ether1_init(void)
{ {
int i, ret = -ENODEV; struct net_device *dev = ecard_get_drvdata(ec);
ecard_startfind(); ecard_set_drvdata(ec, NULL);
for (i = 0; i < MAX_ECARDS; i++) { unregister_netdev(dev);
struct expansion_card *ec;
struct net_device *dev;
ec = ecard_find(0, ether1_cids); release_region(dev->base_addr, 16);
if (!ec) release_region(dev->base_addr + 0x800, 4096);
break; kfree(dev);
dev = ether1_init_one(ec); ecard_release(ec);
if (!dev) }
break;
e_card[i] = ec; static const struct ecard_id ether1_ids[] = {
e_dev[i] = dev; { MANU_ACORN, PROD_ACORN_ETHER1 },
ret = 0; { 0xffff, 0xffff }
} };
return ret; static struct ecard_driver ether1_driver = {
.probe = ether1_probe,
.remove = __devexit_p(ether1_remove),
.id_table = ether1_ids,
.drv = {
.name = "ether1",
},
};
static int __init ether1_init(void)
{
return ecard_register_driver(&ether1_driver);
} }
static void __exit ether1_exit(void) static void __exit ether1_exit(void)
{ {
int i; ecard_remove_driver(&ether1_driver);
for (i = 0; i < MAX_ECARDS; i++) {
if (e_dev[i]) {
unregister_netdev(e_dev[i]);
release_region(e_dev[i]->base_addr, 16);
release_region(e_dev[i]->base_addr + 0x800, 4096);
kfree(e_dev[i]);
e_dev[i] = NULL;
}
if (e_card[i]) {
ecard_release(e_card[i]);
e_card[i] = NULL;
}
}
} }
module_init(ether1_init); module_init(ether1_init);
......
...@@ -61,6 +61,7 @@ ...@@ -61,6 +61,7 @@
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/etherdevice.h> #include <linux/etherdevice.h>
#include <linux/skbuff.h> #include <linux/skbuff.h>
#include <linux/device.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/delay.h> #include <linux/delay.h>
...@@ -75,12 +76,6 @@ static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.Kin ...@@ -75,12 +76,6 @@ static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.Kin
#include "ether3.h" #include "ether3.h"
static unsigned int net_debug = NET_DEBUG; static unsigned int net_debug = NET_DEBUG;
static const card_ids __init ether3_cids[] = {
{ MANU_ANT2, PROD_ANT_ETHER3 },
{ MANU_ANT, PROD_ANT_ETHER3 },
{ MANU_ANT, PROD_ANT_ETHERB },
{ 0xffff, 0xffff }
};
static void ether3_setmulticastlist(struct net_device *dev); static void ether3_setmulticastlist(struct net_device *dev);
static int ether3_rx(struct net_device *dev, struct dev_priv *priv, unsigned int maxcnt); static int ether3_rx(struct net_device *dev, struct dev_priv *priv, unsigned int maxcnt);
...@@ -417,6 +412,12 @@ ether3_probe_bus_16(struct net_device *dev, int val) ...@@ -417,6 +412,12 @@ ether3_probe_bus_16(struct net_device *dev, int val)
static int static int
ether3_open(struct net_device *dev) ether3_open(struct net_device *dev)
{ {
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev)) if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev))
return -EAGAIN; return -EAGAIN;
...@@ -460,6 +461,23 @@ static struct net_device_stats *ether3_getstats(struct net_device *dev) ...@@ -460,6 +461,23 @@ static struct net_device_stats *ether3_getstats(struct net_device *dev)
return &priv->stats; return &priv->stats;
} }
static int
ether3_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
if (netif_running(dev))
return -EBUSY;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
/*
* We'll set the MAC address on the chip when we open it.
*/
return 0;
}
/* /*
* Set or clear promiscuous/multicast mode filter for this adaptor. * Set or clear promiscuous/multicast mode filter for this adaptor.
* *
...@@ -784,6 +802,7 @@ static const char * __init ...@@ -784,6 +802,7 @@ static const char * __init
ether3_get_dev(struct net_device *dev, struct expansion_card *ec) ether3_get_dev(struct net_device *dev, struct expansion_card *ec)
{ {
const char *name = "ether3"; const char *name = "ether3";
dev->base_addr = ecard_address(ec, ECARD_MEMC, 0); dev->base_addr = ecard_address(ec, ECARD_MEMC, 0);
dev->irq = ec->irq; dev->irq = ec->irq;
...@@ -796,38 +815,44 @@ ether3_get_dev(struct net_device *dev, struct expansion_card *ec) ...@@ -796,38 +815,44 @@ ether3_get_dev(struct net_device *dev, struct expansion_card *ec)
ec->irqaddr = (volatile unsigned char *)ioaddr(dev->base_addr); ec->irqaddr = (volatile unsigned char *)ioaddr(dev->base_addr);
ec->irqmask = 0xf0; ec->irqmask = 0xf0;
if (ether3_addr(dev->dev_addr, ec)) ether3_addr(dev->dev_addr, ec);
name = NULL;
return name; return name;
} }
static struct net_device * __init ether3_init_one(struct expansion_card *ec) static int __devinit
ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
{ {
struct net_device *dev; struct net_device *dev;
struct dev_priv *priv; struct dev_priv *priv;
const char *name; const char *name;
int i, bus_type; int i, bus_type, ret;
ether3_banner(); ether3_banner();
ecard_claim(ec); ecard_claim(ec);
dev = init_etherdev(NULL, sizeof(struct dev_priv)); dev = init_etherdev(NULL, sizeof(struct dev_priv));
if (!dev) if (!dev) {
ret = -ENOMEM;
goto out; goto out;
}
SET_MODULE_OWNER(dev); SET_MODULE_OWNER(dev);
name = ether3_get_dev(dev, ec); name = ether3_get_dev(dev, ec);
if (!name) if (!name) {
ret = -ENODEV;
goto free; goto free;
}
/* /*
* this will not fail - the nature of the bus ensures this * this will not fail - the nature of the bus ensures this
*/ */
if (!request_region(dev->base_addr, 128, dev->name)) if (!request_region(dev->base_addr, 128, dev->name)) {
ret = -EBUSY;
goto free; goto free;
}
priv = (struct dev_priv *) dev->priv; priv = (struct dev_priv *) dev->priv;
...@@ -852,11 +877,13 @@ static struct net_device * __init ether3_init_one(struct expansion_card *ec) ...@@ -852,11 +877,13 @@ static struct net_device * __init ether3_init_one(struct expansion_card *ec)
switch (bus_type) { switch (bus_type) {
case BUS_UNKNOWN: case BUS_UNKNOWN:
printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); printk(KERN_ERR "%s: unable to identify bus width\n", dev->name);
ret = -ENODEV;
goto failed; goto failed;
case BUS_8: case BUS_8:
printk(KERN_ERR "%s: %s found, but is an unsupported " printk(KERN_ERR "%s: %s found, but is an unsupported "
"8-bit card\n", dev->name, name); "8-bit card\n", dev->name, name);
ret = -ENODEV;
goto failed; goto failed;
default: default:
...@@ -867,16 +894,21 @@ static struct net_device * __init ether3_init_one(struct expansion_card *ec) ...@@ -867,16 +894,21 @@ static struct net_device * __init ether3_init_one(struct expansion_card *ec)
for (i = 0; i < 6; i++) for (i = 0; i < 6; i++)
printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
if (ether3_init_2(dev)) if (ether3_init_2(dev)) {
ret = -ENODEV;
goto failed; goto failed;
}
dev->open = ether3_open; dev->open = ether3_open;
dev->stop = ether3_close; dev->stop = ether3_close;
dev->hard_start_xmit = ether3_sendpacket; dev->hard_start_xmit = ether3_sendpacket;
dev->get_stats = ether3_getstats; dev->get_stats = ether3_getstats;
dev->set_multicast_list = ether3_setmulticastlist; dev->set_multicast_list = ether3_setmulticastlist;
dev->set_mac_address = ether3_set_mac_address;
dev->tx_timeout = ether3_timeout; dev->tx_timeout = ether3_timeout;
dev->watchdog_timeo = 5 * HZ / 100; dev->watchdog_timeo = 5 * HZ / 100;
ecard_set_drvdata(ec, dev);
return 0; return 0;
failed: failed:
...@@ -886,54 +918,46 @@ static struct net_device * __init ether3_init_one(struct expansion_card *ec) ...@@ -886,54 +918,46 @@ static struct net_device * __init ether3_init_one(struct expansion_card *ec)
kfree(dev); kfree(dev);
out: out:
ecard_release(ec); ecard_release(ec);
return NULL; return ret;
} }
static struct expansion_card *e_card[MAX_ECARDS]; static void __devexit ether3_remove(struct expansion_card *ec)
static struct net_device *e_dev[MAX_ECARDS];
static int ether3_init(void)
{ {
int i, ret = -ENODEV; struct net_device *dev = ecard_get_drvdata(ec);
ecard_startfind(); ecard_set_drvdata(ec, NULL);
for (i = 0; i < MAX_ECARDS; i++) { unregister_netdev(dev);
struct net_device *dev; release_region(dev->base_addr, 128);
struct expansion_card *ec; kfree(dev);
ec = ecard_find(0, ether3_cids); ecard_release(ec);
if (!ec) }
break;
dev = ether3_init_one(ec); static const struct ecard_id ether3_ids[] = {
if (!dev) { MANU_ANT2, PROD_ANT_ETHER3 },
break; { MANU_ANT, PROD_ANT_ETHER3 },
{ MANU_ANT, PROD_ANT_ETHERB },
{ 0xffff, 0xffff }
};
e_card[i] = ec; static struct ecard_driver ether3_driver = {
e_dev[i] = dev; .probe = ether3_probe,
ret = 0; .remove = __devexit_p(ether3_remove),
} .id_table = ether3_ids,
.drv = {
.name = "ether3",
},
};
return ret; static int __init ether3_init(void)
{
return ecard_register_driver(&ether3_driver);
} }
static void ether3_exit(void) static void __exit ether3_exit(void)
{ {
int i; ecard_remove_driver(&ether3_driver);
for (i = 0; i < MAX_ECARDS; i++) {
if (e_dev[i]) {
unregister_netdev(e_dev[i]);
release_region(e_dev[i]->base_addr, 128);
kfree(e_dev[i]);
e_dev[i] = NULL;
}
if (e_card[i]) {
ecard_release(e_card[i]);
e_card[i] = NULL;
}
}
} }
module_init(ether3_init); module_init(ether3_init);
......
...@@ -42,6 +42,7 @@ ...@@ -42,6 +42,7 @@
#include <linux/etherdevice.h> #include <linux/etherdevice.h>
#include <linux/skbuff.h> #include <linux/skbuff.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h> #include <linux/init.h>
#include <asm/system.h> #include <asm/system.h>
...@@ -57,14 +58,6 @@ ...@@ -57,14 +58,6 @@
static unsigned int net_debug = NET_DEBUG; static unsigned int net_debug = NET_DEBUG;
static const card_ids __init etherh_cids[] = {
{ MANU_ANT, PROD_ANT_ETHERM },
{ MANU_I3, PROD_I3_ETHERLAN500 },
{ MANU_I3, PROD_I3_ETHERLAN600 },
{ MANU_I3, PROD_I3_ETHERLAN600A },
{ 0xffff, 0xffff }
};
struct etherh_priv { struct etherh_priv {
struct ei_device eidev; struct ei_device eidev;
unsigned int id; unsigned int id;
...@@ -441,6 +434,12 @@ etherh_open(struct net_device *dev) ...@@ -441,6 +434,12 @@ etherh_open(struct net_device *dev)
{ {
struct ei_device *ei_local = (struct ei_device *) dev->priv; struct ei_device *ei_local = (struct ei_device *) dev->priv;
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
dev->name);
return -EINVAL;
}
if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)) if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))
return -EAGAIN; return -EAGAIN;
...@@ -483,6 +482,23 @@ etherh_close(struct net_device *dev) ...@@ -483,6 +482,23 @@ etherh_close(struct net_device *dev)
return 0; return 0;
} }
static int
etherh_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
if (netif_running(dev))
return -EBUSY;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
/*
* We'll set the MAC address on the chip when we open it.
*/
return 0;
}
/* /*
* Initialisation * Initialisation
*/ */
...@@ -541,21 +557,24 @@ static int __init etherm_addr(char *addr) ...@@ -541,21 +557,24 @@ static int __init etherm_addr(char *addr)
static u32 etherh_regoffsets[16]; static u32 etherh_regoffsets[16];
static u32 etherm_regoffsets[16]; static u32 etherm_regoffsets[16];
static struct net_device * __init etherh_init_one(struct expansion_card *ec) static int __init
etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
{ {
struct ei_device *ei_local; struct ei_device *ei_local;
struct net_device *dev; struct net_device *dev;
struct etherh_priv *eh; struct etherh_priv *eh;
const char *dev_type; const char *dev_type;
int i, size; int i, size, ret;
etherh_banner(); etherh_banner();
ecard_claim(ec); ecard_claim(ec);
dev = init_etherdev(NULL, sizeof(struct etherh_priv)); dev = init_etherdev(NULL, sizeof(struct etherh_priv));
if (!dev) if (!dev) {
ret = -ENOMEM;
goto out; goto out;
}
/* /*
* init_etherdev allocs and zeros dev->priv * init_etherdev allocs and zeros dev->priv
...@@ -568,31 +587,31 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec) ...@@ -568,31 +587,31 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec)
dev->open = etherh_open; dev->open = etherh_open;
dev->stop = etherh_close; dev->stop = etherh_close;
dev->set_mac_address = etherh_set_mac_address;
dev->set_config = etherh_set_config; dev->set_config = etherh_set_config;
dev->irq = ec->irq; dev->irq = ec->irq;
dev->base_addr = ecard_address(ec, ECARD_MEMC, 0); dev->base_addr = ecard_address(ec, ECARD_MEMC, 0);
dev->priv = eh;
/* /*
* IRQ and control port handling * IRQ and control port handling
*/ */
if (ec->irq != 11) {
ec->ops = &etherh_ops; ec->ops = &etherh_ops;
ec->irq_data = eh; ec->irq_data = eh;
}
eh->ctrl = 0; eh->ctrl = 0;
eh->id = ec->cid.product; eh->id = ec->cid.product;
switch (ec->cid.product) { switch (ec->cid.product) {
case PROD_ANT_ETHERM: case PROD_ANT_ETHERM:
if (etherm_addr(dev->dev_addr)) etherm_addr(dev->dev_addr);
goto free;
dev->base_addr += ETHERM_NS8390; dev->base_addr += ETHERM_NS8390;
dev->mem_start = dev->base_addr + ETHERM_DATAPORT; dev->mem_start = dev->base_addr + ETHERM_DATAPORT;
eh->ctrl_port = dev->base_addr + ETHERM_CTRLPORT; eh->ctrl_port = dev->base_addr + ETHERM_CTRLPORT;
break; break;
case PROD_I3_ETHERLAN500: case PROD_I3_ETHERLAN500:
if (etherh_addr(dev->dev_addr, ec)) etherh_addr(dev->dev_addr, ec);
goto free;
dev->base_addr += ETHERH500_NS8390; dev->base_addr += ETHERH500_NS8390;
dev->mem_start = dev->base_addr + ETHERH500_DATAPORT; dev->mem_start = dev->base_addr + ETHERH500_DATAPORT;
eh->ctrl_port = ecard_address (ec, ECARD_IOC, ECARD_FAST) eh->ctrl_port = ecard_address (ec, ECARD_IOC, ECARD_FAST)
...@@ -601,8 +620,7 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec) ...@@ -601,8 +620,7 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec)
case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600:
case PROD_I3_ETHERLAN600A: case PROD_I3_ETHERLAN600A:
if (etherh_addr(dev->dev_addr, ec)) etherh_addr(dev->dev_addr, ec);
goto free;
dev->base_addr += ETHERH600_NS8390; dev->base_addr += ETHERH600_NS8390;
dev->mem_start = dev->base_addr + ETHERH600_DATAPORT; dev->mem_start = dev->base_addr + ETHERH600_DATAPORT;
eh->ctrl_port = dev->base_addr + ETHERH600_CTRLPORT; eh->ctrl_port = dev->base_addr + ETHERH600_CTRLPORT;
...@@ -611,6 +629,7 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec) ...@@ -611,6 +629,7 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec)
default: default:
printk(KERN_ERR "%s: unknown card type %x\n", printk(KERN_ERR "%s: unknown card type %x\n",
dev->name, ec->cid.product); dev->name, ec->cid.product);
ret = -ENODEV;
goto free; goto free;
} }
...@@ -618,11 +637,15 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec) ...@@ -618,11 +637,15 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec)
if (ec->cid.product == PROD_ANT_ETHERM) if (ec->cid.product == PROD_ANT_ETHERM)
size <<= 3; size <<= 3;
if (!request_region(dev->base_addr, size, dev->name)) if (!request_region(dev->base_addr, size, dev->name)) {
ret = -EBUSY;
goto free; goto free;
}
if (ethdev_init(dev)) if (ethdev_init(dev)) {
ret = -ENODEV;
goto release; goto release;
}
/* /*
* If we're in the NIC slot, make sure the IRQ is enabled * If we're in the NIC slot, make sure the IRQ is enabled
...@@ -690,7 +713,10 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec) ...@@ -690,7 +713,10 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec)
etherh_reset(dev); etherh_reset(dev);
NS8390_init(dev, 0); NS8390_init(dev, 0);
return dev;
ecard_set_drvdata(ec, dev);
return 0;
release: release:
release_region(dev->base_addr, 16); release_region(dev->base_addr, 16);
...@@ -700,67 +726,59 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec) ...@@ -700,67 +726,59 @@ static struct net_device * __init etherh_init_one(struct expansion_card *ec)
kfree(dev); kfree(dev);
out: out:
ecard_release(ec); ecard_release(ec);
return NULL; return ret;
} }
#define MAX_ETHERH_CARDS 2 static void __devexit etherh_remove(struct expansion_card *ec)
{
struct net_device *dev = ecard_get_drvdata(ec);
int size = 16;
static struct net_device *e_dev[MAX_ETHERH_CARDS]; ecard_set_drvdata(ec, NULL);
static struct expansion_card *e_card[MAX_ETHERH_CARDS];
unregister_netdev(dev);
if (ec->cid.product == PROD_ANT_ETHERM)
size <<= 3;
release_region(dev->base_addr, size);
kfree(dev);
ec->ops = NULL;
kfree(ec->irq_data);
ecard_release(ec);
}
static const struct ecard_id etherh_ids[] = {
{ MANU_ANT, PROD_ANT_ETHERM },
{ MANU_I3, PROD_I3_ETHERLAN500 },
{ MANU_I3, PROD_I3_ETHERLAN600 },
{ MANU_I3, PROD_I3_ETHERLAN600A },
{ 0xffff, 0xffff }
};
static struct ecard_driver etherh_driver = {
.probe = etherh_probe,
.remove = __devexit_p(etherh_remove),
.id_table = etherh_ids,
.drv = {
.name = "etherh",
},
};
static int __init etherh_init(void) static int __init etherh_init(void)
{ {
int i, ret = -ENODEV; int i;
for (i = 0; i < 16; i++) { for (i = 0; i < 16; i++) {
etherh_regoffsets[i] = i; etherh_regoffsets[i] = i;
etherm_regoffsets[i] = i << 3; etherm_regoffsets[i] = i << 3;
} }
ecard_startfind(); return ecard_register_driver(&etherh_driver);
for (i = 0; i < MAX_ECARDS; i++) {
struct expansion_card *ec;
struct net_device *dev;
ec = ecard_find(0, etherh_cids);
if (!ec)
break;
dev = etherh_init_one(ec);
if (!dev)
break;
e_card[i] = ec;
e_dev[i] = dev;
ret = 0;
}
return ret;
} }
static void __exit etherh_exit(void) static void __exit etherh_exit(void)
{ {
int i; ecard_remove_driver(&etherh_driver);
for (i = 0; i < MAX_ETHERH_CARDS; i++) {
if (e_dev[i]) {
int size;
unregister_netdev(e_dev[i]);
size = 16;
if (e_card[i]->cid.product == PROD_ANT_ETHERM)
size <<= 3;
release_region(e_dev[i]->base_addr, size);
kfree(e_dev[i]);
e_dev[i] = NULL;
}
if (e_card[i]) {
e_card[i]->ops = NULL;
kfree(e_card[i]->irq_data);
ecard_release(e_card[i]);
e_card[i] = NULL;
}
}
} }
module_init(etherh_init); module_init(etherh_init);
......
...@@ -319,12 +319,12 @@ acornscsi_csdelay(unsigned int cs) ...@@ -319,12 +319,12 @@ acornscsi_csdelay(unsigned int cs)
target_jiffies = jiffies + 1 + cs * HZ / 100; target_jiffies = jiffies + 1 + cs * HZ / 100;
save_flags(flags); local_save_flags(flags);
sti(); local_irq_enable();
while (time_before(jiffies, target_jiffies)) barrier(); while (time_before(jiffies, target_jiffies)) barrier();
restore_flags(flags); local_irq_restore(flags);
} }
static static
...@@ -403,8 +403,9 @@ void acornscsi_resetcard(AS_Host *host) ...@@ -403,8 +403,9 @@ void acornscsi_resetcard(AS_Host *host)
host->scsi.phase = PHASE_IDLE; host->scsi.phase = PHASE_IDLE;
host->scsi.disconnectable = 0; host->scsi.disconnectable = 0;
memset(host->busyluns, 0, sizeof(host->busyluns));
for (i = 0; i < 8; i++) { for (i = 0; i < 8; i++) {
host->busyluns[i] = 0;
host->device[i].sync_state = SYNC_NEGOCIATE; host->device[i].sync_state = SYNC_NEGOCIATE;
host->device[i].disconnect_ok = 1; host->device[i].disconnect_ok = 1;
} }
...@@ -1593,7 +1594,7 @@ void acornscsi_message(AS_Host *host) ...@@ -1593,7 +1594,7 @@ void acornscsi_message(AS_Host *host)
printk(KERN_NOTICE "scsi%d.%c: disabling tagged queueing\n", printk(KERN_NOTICE "scsi%d.%c: disabling tagged queueing\n",
host->host->host_no, acornscsi_target(host)); host->host->host_no, acornscsi_target(host));
host->SCpnt->device->tagged_queue = 0; host->SCpnt->device->tagged_queue = 0;
set_bit(host->SCpnt->target * 8 + host->SCpnt->lun, &host->busyluns); set_bit(host->SCpnt->target * 8 + host->SCpnt->lun, host->busyluns);
break; break;
#endif #endif
case EXTENDED_MESSAGE | (EXTENDED_SDTR << 8): case EXTENDED_MESSAGE | (EXTENDED_SDTR << 8):
...@@ -2637,8 +2638,7 @@ acornscsi_do_abort(AS_Host *host, Scsi_Cmnd *SCpnt) ...@@ -2637,8 +2638,7 @@ acornscsi_do_abort(AS_Host *host, Scsi_Cmnd *SCpnt)
printk("executing "); printk("executing ");
//#endif //#endif
save_flags(flags); local_irq_save(flags);
cli();
switch (host->scsi.phase) { switch (host->scsi.phase) {
/* /*
* If the interface is idle, and the command is 'disconnectable', * If the interface is idle, and the command is 'disconnectable',
...@@ -2671,7 +2671,7 @@ acornscsi_do_abort(AS_Host *host, Scsi_Cmnd *SCpnt) ...@@ -2671,7 +2671,7 @@ acornscsi_do_abort(AS_Host *host, Scsi_Cmnd *SCpnt)
acornscsi_abortcmd(host, host->SCpnt->tag); acornscsi_abortcmd(host, host->SCpnt->tag);
res = res_snooze; res = res_snooze;
} }
restore_flags(flags); local_irq_restore(flags);
} else if (host->origSCpnt == SCpnt) { } else if (host->origSCpnt == SCpnt) {
/* /*
* The command will be executed next, but a command * The command will be executed next, but a command
......
...@@ -326,7 +326,7 @@ typedef struct acornscsi_hostdata { ...@@ -326,7 +326,7 @@ typedef struct acornscsi_hostdata {
syncxfer_t sync_state; /* sync xfer negociation state */ syncxfer_t sync_state; /* sync xfer negociation state */
unsigned char disconnect_ok:1; /* device can disconnect */ unsigned char disconnect_ok:1; /* device can disconnect */
} device[8]; } device[8];
unsigned char busyluns[8]; /* array of bits indicating LUNs busy */ unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */
/* DMA info */ /* DMA info */
struct { struct {
......
...@@ -83,10 +83,8 @@ static const card_ids cumanascsi_cids[] = { ...@@ -83,10 +83,8 @@ static const card_ids cumanascsi_cids[] = {
#define NCR5380_read(reg) cumanascsi_read(_instance, reg) #define NCR5380_read(reg) cumanascsi_read(_instance, reg)
#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value) #define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
#define do_NCR5380_intr do_cumanascsi_intr #define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command #define NCR5380_queue_command cumanascsi_queue_command
#define NCR5380_abort cumanascsi_abort
#define NCR5380_reset cumanascsi_reset
#define NCR5380_proc_info cumanascsi_proc_info #define NCR5380_proc_info cumanascsi_proc_info
int NCR5380_proc_info(char *buffer, char **start, off_t offset, int NCR5380_proc_info(char *buffer, char **start, off_t offset,
...@@ -159,7 +157,7 @@ int cumanascsi_detect(Scsi_Host_Template * tpnt) ...@@ -159,7 +157,7 @@ int cumanascsi_detect(Scsi_Host_Template * tpnt)
outb(0x00, instance->io_port - 577); outb(0x00, instance->io_port - 577);
if (instance->irq != IRQ_NONE) if (instance->irq != IRQ_NONE)
if (request_irq(instance->irq, do_cumanascsi_intr, SA_INTERRUPT, "CumanaSCSI-1", NULL)) { if (request_irq(instance->irq, cumanascsi_intr, SA_INTERRUPT, "CumanaSCSI-1", NULL)) {
printk("scsi%d: IRQ%d not free, interrupts disabled\n", printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq); instance->host_no, instance->irq);
instance->irq = IRQ_NONE; instance->irq = IRQ_NONE;
...@@ -401,8 +399,10 @@ static Scsi_Host_Template cumanascsi_template = { ...@@ -401,8 +399,10 @@ static Scsi_Host_Template cumanascsi_template = {
.release = cumanascsi_release, .release = cumanascsi_release,
.info = cumanascsi_info, .info = cumanascsi_info,
.queuecommand = cumanascsi_queue_command, .queuecommand = cumanascsi_queue_command,
.abort = cumanascsi_abort, .eh_abort_handler = NCR5380_abort,
.reset = cumanascsi_reset, .eh_device_reset_handler= NCR5380_device_reset,
.eh_bus_reset_handler = NCR5380_bus_reset,
.eh_host_reset_handler = NCR5380_host_reset,
.bios_param = scsicam_bios_param, .bios_param = scsicam_bios_param,
.can_queue = 16, .can_queue = 16,
.this_id = 7, .this_id = 7,
......
...@@ -248,10 +248,8 @@ printk("reading %p len %d\n",addr, len); ...@@ -248,10 +248,8 @@ printk("reading %p len %d\n",addr, len);
#define NCR5380_read(reg) ecoscsi_read(_instance, reg) #define NCR5380_read(reg) ecoscsi_read(_instance, reg)
#define NCR5380_write(reg, value) ecoscsi_write(_instance, reg, value) #define NCR5380_write(reg, value) ecoscsi_write(_instance, reg, value)
#define do_NCR5380_intr do_ecoscsi_intr #define NCR5380_intr ecoscsi_intr
#define NCR5380_queue_command ecoscsi_queue_command #define NCR5380_queue_command ecoscsi_queue_command
#define NCR5380_abort ecoscsi_abort
#define NCR5380_reset ecoscsi_reset
#define NCR5380_proc_info ecoscsi_proc_info #define NCR5380_proc_info ecoscsi_proc_info
int NCR5380_proc_info(char *buffer, char **start, off_t offset, int NCR5380_proc_info(char *buffer, char **start, off_t offset,
...@@ -269,8 +267,10 @@ static Scsi_Host_Template ecoscsi_template = { ...@@ -269,8 +267,10 @@ static Scsi_Host_Template ecoscsi_template = {
.release = ecoscsi_release, .release = ecoscsi_release,
.info = ecoscsi_info, .info = ecoscsi_info,
.queuecommand = ecoscsi_queue_command, .queuecommand = ecoscsi_queue_command,
.abort = ecoscsi_abort, .eh_abort_handler = NCR5380_abort,
.reset = ecoscsi_reset, .eh_device_reset_handler= NCR5380_device_reset,
.eh_bus_reset_handler = NCR5380_bus_reset,
.eh_host_reset_handler = NCR5380_host_reset,
.can_queue = 16, .can_queue = 16,
.this_id = 7, .this_id = 7,
.sg_tablesize = SG_ALL, .sg_tablesize = SG_ALL,
......
...@@ -603,7 +603,7 @@ fas216_updateptrs(FAS216_Info *info, int bytes_transferred) ...@@ -603,7 +603,7 @@ fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
* next buffer. * next buffer.
*/ */
bytes_transferred -= SCp->this_residual; bytes_transferred -= SCp->this_residual;
if (!next_SCp(&info->scsi.SCp)) { if (!next_SCp(&info->scsi.SCp) && bytes_transferred) {
printk(KERN_WARNING "scsi%d.%c: out of buffers\n", printk(KERN_WARNING "scsi%d.%c: out of buffers\n",
info->host->host_no, '0' + info->SCpnt->target); info->host->host_no, '0' + info->SCpnt->target);
return; return;
...@@ -2300,8 +2300,8 @@ int fas216_eh_device_reset(Scsi_Cmnd *SCpnt) ...@@ -2300,8 +2300,8 @@ int fas216_eh_device_reset(Scsi_Cmnd *SCpnt)
{ {
FAS216_Info *info = (FAS216_Info *)SCpnt->host->hostdata; FAS216_Info *info = (FAS216_Info *)SCpnt->host->hostdata;
printk("scsi%d.%c: "__FUNCTION__": called\n", printk("scsi%d.%c: %s: called\n",
info->host->host_no, '0' + SCpnt->target); info->host->host_no, '0' + SCpnt->target, __FUNCTION__);
return FAILED; return FAILED;
} }
...@@ -2320,8 +2320,8 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt) ...@@ -2320,8 +2320,8 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt)
info->stats.bus_resets += 1; info->stats.bus_resets += 1;
printk("scsi%d.%c: "__FUNCTION__": resetting bus\n", printk("scsi%d.%c: %s: resetting bus\n",
info->host->host_no, '0' + SCpnt->target); info->host->host_no, '0' + SCpnt->target, __FUNCTION__);
/* /*
* Attempt to stop all activity on this interface. * Attempt to stop all activity on this interface.
...@@ -2381,8 +2381,8 @@ int fas216_eh_host_reset(Scsi_Cmnd *SCpnt) ...@@ -2381,8 +2381,8 @@ int fas216_eh_host_reset(Scsi_Cmnd *SCpnt)
fas216_checkmagic(info); fas216_checkmagic(info);
printk("scsi%d.%c: "__FUNCTION__": resetting host\n", printk("scsi%d.%c: %s: resetting host\n",
info->host->host_no, '0' + SCpnt->target); info->host->host_no, '0' + SCpnt->target, __FUNCTION__);
/* /*
* Reset the SCSI chip. * Reset the SCSI chip.
......
...@@ -288,7 +288,7 @@ typedef struct { ...@@ -288,7 +288,7 @@ typedef struct {
neg_t sync_state; /* synchronous transfer mode */ neg_t sync_state; /* synchronous transfer mode */
neg_t wide_state; /* wide transfer mode */ neg_t wide_state; /* wide transfer mode */
} device[8]; } device[8];
unsigned char busyluns[8]; /* array of bits indicating LUNs busy */ unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */
/* dma */ /* dma */
struct { struct {
......
...@@ -64,10 +64,8 @@ ...@@ -64,10 +64,8 @@
#define NCR5380_read(reg) oakscsi_read(_instance, reg) #define NCR5380_read(reg) oakscsi_read(_instance, reg)
#define NCR5380_write(reg, value) oakscsi_write(_instance, reg, value) #define NCR5380_write(reg, value) oakscsi_write(_instance, reg, value)
#define do_NCR5380_intr do_oakscsi_intr #define NCR5380_intr oakscsi_intr
#define NCR5380_queue_command oakscsi_queue_command #define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_abort oakscsi_abort
#define NCR5380_reset oakscsi_reset
#define NCR5380_proc_info oakscsi_proc_info #define NCR5380_proc_info oakscsi_proc_info
int NCR5380_proc_info(char *buffer, char **start, off_t offset, int NCR5380_proc_info(char *buffer, char **start, off_t offset,
...@@ -142,7 +140,7 @@ int oakscsi_detect(Scsi_Host_Template * tpnt) ...@@ -142,7 +140,7 @@ int oakscsi_detect(Scsi_Host_Template * tpnt)
} }
if (instance->irq != IRQ_NONE) if (instance->irq != IRQ_NONE)
if (request_irq(instance->irq, do_oakscsi_intr, SA_INTERRUPT, "Oak SCSI", NULL)) { if (request_irq(instance->irq, oakscsi_intr, SA_INTERRUPT, "Oak SCSI", NULL)) {
printk("scsi%d: IRQ%d not free, interrupts disabled\n", printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq); instance->host_no, instance->irq);
instance->irq = IRQ_NONE; instance->irq = IRQ_NONE;
...@@ -264,8 +262,10 @@ static Scsi_Host_Template oakscsi_template = { ...@@ -264,8 +262,10 @@ static Scsi_Host_Template oakscsi_template = {
.release = oakscsi_release, .release = oakscsi_release,
.info = oakscsi_info, .info = oakscsi_info,
.queuecommand = oakscsi_queue_command, .queuecommand = oakscsi_queue_command,
.abort = oakscsi_abort, .eh_abort_handler = NCR5380_abort,
.reset = oakscsi_reset, .eh_device_reset_handler= NCR5380_device_reset,
.eh_bus_reset_handler = NCR5380_bus_reset,
.eh_host_reset_handler = NCR5380_host_reset,
.can_queue = 16, .can_queue = 16,
.this_id = 7, .this_id = 7,
.sg_tablesize = SG_ALL, .sg_tablesize = SG_ALL,
......
...@@ -161,7 +161,7 @@ static Scsi_Cmnd *__queue_remove(Queue_t *queue, struct list_head *ent) ...@@ -161,7 +161,7 @@ static Scsi_Cmnd *__queue_remove(Queue_t *queue, struct list_head *ent)
* exclude - bit array of target&lun which is busy * exclude - bit array of target&lun which is busy
* Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available * Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available
*/ */
Scsi_Cmnd *queue_remove_exclude(Queue_t *queue, void *exclude) Scsi_Cmnd *queue_remove_exclude(Queue_t *queue, unsigned long *exclude)
{ {
unsigned long flags; unsigned long flags;
struct list_head *l; struct list_head *l;
......
...@@ -46,7 +46,7 @@ extern Scsi_Cmnd *queue_remove (Queue_t *queue); ...@@ -46,7 +46,7 @@ extern Scsi_Cmnd *queue_remove (Queue_t *queue);
* exclude - array of busy LUNs * exclude - array of busy LUNs
* Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available * Returns : Scsi_Cmnd if successful (and a reference), or NULL if no command available
*/ */
extern Scsi_Cmnd *queue_remove_exclude (Queue_t *queue, void *exclude); extern Scsi_Cmnd *queue_remove_exclude (Queue_t *queue, unsigned long *exclude);
#define queue_add_cmd_ordered(queue,SCpnt) \ #define queue_add_cmd_ordered(queue,SCpnt) \
__queue_add(queue,SCpnt,(SCpnt)->cmnd[0] == REQUEST_SENSE) __queue_add(queue,SCpnt,(SCpnt)->cmnd[0] == REQUEST_SENSE)
......
...@@ -51,7 +51,7 @@ static inline int next_SCp(Scsi_Pointer *SCp) ...@@ -51,7 +51,7 @@ static inline int next_SCp(Scsi_Pointer *SCp)
static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp) static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp)
{ {
char c = SCp->ptr; char c = *SCp->ptr;
SCp->ptr += 1; SCp->ptr += 1;
SCp->this_residual -= 1; SCp->this_residual -= 1;
...@@ -63,7 +63,7 @@ static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp) ...@@ -63,7 +63,7 @@ static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp)
static inline void put_next_SCp_byte(Scsi_Pointer *SCp, unsigned char c) static inline void put_next_SCp_byte(Scsi_Pointer *SCp, unsigned char c)
{ {
SCp->ptr = c; *SCp->ptr = c;
SCp->ptr += 1; SCp->ptr += 1;
SCp->this_residual -= 1; SCp->this_residual -= 1;
if (SCp->this_residual == 0) if (SCp->this_residual == 0)
......
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
This is access code for flashes using ARM's flash partitioning This is access code for flashes using ARM's flash partitioning
standards. standards.
$Id: afs.c,v 1.6 2001/10/02 10:04:51 rmk Exp $ $Id: afs.c,v 1.8 2002/05/04 08:49:09 rmk Exp $
======================================================================*/ ======================================================================*/
...@@ -82,6 +82,12 @@ afs_read_footer(struct mtd_info *mtd, u_int *img_start, u_int *iis_start, ...@@ -82,6 +82,12 @@ afs_read_footer(struct mtd_info *mtd, u_int *img_start, u_int *iis_start,
if (fs.signature != 0xa0ffff9f) if (fs.signature != 0xa0ffff9f)
ret = 1; ret = 1;
/*
* Don't touch the SIB.
*/
if (fs.type == 2)
ret = 1;
*iis_start = fs.image_info_base & mask; *iis_start = fs.image_info_base & mask;
*img_start = fs.image_start & mask; *img_start = fs.image_start & mask;
...@@ -163,6 +169,7 @@ int parse_afs_partitions(struct mtd_info *mtd, struct mtd_partition **pparts) ...@@ -163,6 +169,7 @@ int parse_afs_partitions(struct mtd_info *mtd, struct mtd_partition **pparts)
if (!parts) if (!parts)
return -ENOMEM; return -ENOMEM;
memset(parts, 0, sz);
str = (char *)(parts + idx); str = (char *)(parts + idx);
/* /*
......
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
This is access code for flashes using ARM's flash partitioning This is access code for flashes using ARM's flash partitioning
standards. standards.
$Id: integrator-flash.c,v 1.6 2001/10/02 16:00:01 dwmw2 Exp $ $Id: integrator-flash.c,v 1.7 2001/11/01 20:55:47 rmk Exp $
======================================================================*/ ======================================================================*/
...@@ -208,10 +208,10 @@ static struct map_info armflash_map = ...@@ -208,10 +208,10 @@ static struct map_info armflash_map =
}; };
static struct mtd_info *mtd; static struct mtd_info *mtd;
static struct mtd_partition *parts;
static int __init armflash_cfi_init(void *base, u_int size) static int __init armflash_cfi_init(void *base, u_int size)
{ {
struct mtd_partition *parts;
int ret; int ret;
armflash_flash_init(); armflash_flash_init();
...@@ -238,8 +238,6 @@ static int __init armflash_cfi_init(void *base, u_int size) ...@@ -238,8 +238,6 @@ static int __init armflash_cfi_init(void *base, u_int size)
ret = parse_afs_partitions(mtd, &parts); ret = parse_afs_partitions(mtd, &parts);
if (ret > 0) { if (ret > 0) {
ret = add_mtd_partitions(mtd, parts, ret); ret = add_mtd_partitions(mtd, parts, ret);
/* we don't need the partition info any longer */
kfree(parts);
if (ret) if (ret)
printk(KERN_ERR "mtd partition registration " printk(KERN_ERR "mtd partition registration "
"failed: %d\n", ret); "failed: %d\n", ret);
...@@ -262,6 +260,8 @@ static void armflash_cfi_exit(void) ...@@ -262,6 +260,8 @@ static void armflash_cfi_exit(void)
del_mtd_partitions(mtd); del_mtd_partitions(mtd);
map_destroy(mtd); map_destroy(mtd);
} }
if (parts)
kfree(parts);
} }
static int __init armflash_init(void) static int __init armflash_init(void)
......
...@@ -84,14 +84,14 @@ adsbitsy_pcmcia_configure_socket(const struct pcmcia_configure *conf) ...@@ -84,14 +84,14 @@ adsbitsy_pcmcia_configure_socket(const struct pcmcia_configure *conf)
} }
static struct pcmcia_low_level adsbitsy_pcmcia_ops = { static struct pcmcia_low_level adsbitsy_pcmcia_ops = {
init: adsbitsy_pcmcia_init, .init = adsbitsy_pcmcia_init,
shutdown: sa1111_pcmcia_shutdown, .shutdown = sa1111_pcmcia_shutdown,
socket_state: sa1111_pcmcia_socket_state, .socket_state = sa1111_pcmcia_socket_state,
get_irq_info: sa1111_pcmcia_get_irq_info, .get_irq_info = sa1111_pcmcia_get_irq_info,
configure_socket: adsbitsy_pcmcia_configure_socket, .configure_socket = adsbitsy_pcmcia_configure_socket,
socket_init: sa1111_pcmcia_socket_init, .socket_init = sa1111_pcmcia_socket_init,
socket_suspend: sa1111_pcmcia_socket_suspend, .socket_suspend = sa1111_pcmcia_socket_suspend,
}; };
int __init pcmcia_adsbitsy_init(void) int __init pcmcia_adsbitsy_init(void)
......
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/arch/assabet.h> #include <asm/arch/assabet.h>
...@@ -192,14 +193,14 @@ static int assabet_pcmcia_socket_suspend(int sock) ...@@ -192,14 +193,14 @@ static int assabet_pcmcia_socket_suspend(int sock)
} }
static struct pcmcia_low_level assabet_pcmcia_ops = { static struct pcmcia_low_level assabet_pcmcia_ops = {
init: assabet_pcmcia_init, .init = assabet_pcmcia_init,
shutdown: assabet_pcmcia_shutdown, .shutdown = assabet_pcmcia_shutdown,
socket_state: assabet_pcmcia_socket_state, .socket_state = assabet_pcmcia_socket_state,
get_irq_info: assabet_pcmcia_get_irq_info, .get_irq_info = assabet_pcmcia_get_irq_info,
configure_socket: assabet_pcmcia_configure_socket, .configure_socket = assabet_pcmcia_configure_socket,
socket_init: assabet_pcmcia_socket_init, .socket_init = assabet_pcmcia_socket_init,
socket_suspend: assabet_pcmcia_socket_suspend, .socket_suspend = assabet_pcmcia_socket_suspend,
}; };
int __init pcmcia_assabet_init(void) int __init pcmcia_assabet_init(void)
......
...@@ -146,14 +146,14 @@ badge4_pcmcia_configure_socket(const struct pcmcia_configure *conf) ...@@ -146,14 +146,14 @@ badge4_pcmcia_configure_socket(const struct pcmcia_configure *conf)
} }
static struct pcmcia_low_level badge4_pcmcia_ops = { static struct pcmcia_low_level badge4_pcmcia_ops = {
init: badge4_pcmcia_init, .init = badge4_pcmcia_init,
shutdown: badge4_pcmcia_shutdown, .shutdown = badge4_pcmcia_shutdown,
socket_state: sa1111_pcmcia_socket_state, .socket_state = sa1111_pcmcia_socket_state,
get_irq_info: sa1111_pcmcia_get_irq_info, .get_irq_info = sa1111_pcmcia_get_irq_info,
configure_socket: badge4_pcmcia_configure_socket, .configure_socket = badge4_pcmcia_configure_socket,
socket_init: sa1111_pcmcia_socket_init, .socket_init = sa1111_pcmcia_socket_init,
socket_suspend: sa1111_pcmcia_socket_suspend, .socket_suspend = sa1111_pcmcia_socket_suspend,
}; };
int __init pcmcia_badge4_init(void) int __init pcmcia_badge4_init(void)
......
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
...@@ -160,14 +161,14 @@ static int cerf_pcmcia_socket_suspend(int sock) ...@@ -160,14 +161,14 @@ static int cerf_pcmcia_socket_suspend(int sock)
} }
static struct pcmcia_low_level cerf_pcmcia_ops = { static struct pcmcia_low_level cerf_pcmcia_ops = {
init: cerf_pcmcia_init, .init = cerf_pcmcia_init,
shutdown: cerf_pcmcia_shutdown, .shutdown = cerf_pcmcia_shutdown,
socket_state: cerf_pcmcia_socket_state, .socket_state = cerf_pcmcia_socket_state,
get_irq_info: cerf_pcmcia_get_irq_info, .get_irq_info = cerf_pcmcia_get_irq_info,
configure_socket: cerf_pcmcia_configure_socket, .configure_socket = cerf_pcmcia_configure_socket,
socket_init: cerf_pcmcia_socket_init, .socket_init = cerf_pcmcia_socket_init,
socket_suspend: cerf_pcmcia_socket_suspend, .socket_suspend = cerf_pcmcia_socket_suspend,
}; };
int __init pcmcia_cerf_init(void) int __init pcmcia_cerf_init(void)
......
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
...@@ -221,14 +222,14 @@ static int flexanet_pcmcia_socket_suspend(int sock) ...@@ -221,14 +222,14 @@ static int flexanet_pcmcia_socket_suspend(int sock)
* *
*/ */
static struct pcmcia_low_level flexanet_pcmcia_ops = { static struct pcmcia_low_level flexanet_pcmcia_ops = {
init: flexanet_pcmcia_init, .init = flexanet_pcmcia_init,
shutdown: flexanet_pcmcia_shutdown, .shutdown = flexanet_pcmcia_shutdown,
socket_state: flexanet_pcmcia_socket_state, .socket_state = flexanet_pcmcia_socket_state,
get_irq_info: flexanet_pcmcia_get_irq_info, .get_irq_info = flexanet_pcmcia_get_irq_info,
configure_socket: flexanet_pcmcia_configure_socket, .configure_socket = flexanet_pcmcia_configure_socket,
socket_init: flexanet_pcmcia_socket_init, .socket_init = flexanet_pcmcia_socket_init,
socket_suspend: flexanet_pcmcia_socket_suspend, .socket_suspend = flexanet_pcmcia_socket_suspend,
}; };
int __init pcmcia_flexanet_init(void) int __init pcmcia_flexanet_init(void)
......
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
...@@ -178,14 +179,14 @@ static int freebird_pcmcia_socket_suspend(int sock) ...@@ -178,14 +179,14 @@ static int freebird_pcmcia_socket_suspend(int sock)
} }
static struct pcmcia_low_level freebird_pcmcia_ops = { static struct pcmcia_low_level freebird_pcmcia_ops = {
init: freebird_pcmcia_init, .init = freebird_pcmcia_init,
shutdown: freebird_pcmcia_shutdown, .shutdown = freebird_pcmcia_shutdown,
socket_state: freebird_pcmcia_socket_state, .socket_state = freebird_pcmcia_socket_state,
get_irq_info: freebird_pcmcia_get_irq_info, .get_irq_info = freebird_pcmcia_get_irq_info,
configure_socket: freebird_pcmcia_configure_socket, .configure_socket = freebird_pcmcia_configure_socket,
socket_init: freebird_pcmcia_socket_init, .socket_init = freebird_pcmcia_socket_init,
socket_suspend: freebird_pcmcia_socket_suspend, .socket_suspend = freebird_pcmcia_socket_suspend,
}; };
int __init pcmcia_freebird_init(void) int __init pcmcia_freebird_init(void)
......
...@@ -719,7 +719,7 @@ sa1100_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map) ...@@ -719,7 +719,7 @@ sa1100_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map)
(map->flags&MAP_ATTRIB)?"ATTRIB ":"", (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
(map->flags&MAP_USE_WAIT)?"USE_WAIT ":""); (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
if (map->map >= MAX_WIN){ if (map->map >= MAX_WIN) {
printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__, printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
map->map); map->map);
return -1; return -1;
...@@ -853,19 +853,19 @@ sa1100_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base) ...@@ -853,19 +853,19 @@ sa1100_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base)
#endif /* defined(CONFIG_PROC_FS) */ #endif /* defined(CONFIG_PROC_FS) */
static struct pccard_operations sa1100_pcmcia_operations = { static struct pccard_operations sa1100_pcmcia_operations = {
init: sa1100_pcmcia_sock_init, .init = sa1100_pcmcia_sock_init,
suspend: sa1100_pcmcia_suspend, .suspend = sa1100_pcmcia_suspend,
register_callback: sa1100_pcmcia_register_callback, .register_callback = sa1100_pcmcia_register_callback,
inquire_socket: sa1100_pcmcia_inquire_socket, .inquire_socket = sa1100_pcmcia_inquire_socket,
get_status: sa1100_pcmcia_get_status, .get_status = sa1100_pcmcia_get_status,
get_socket: sa1100_pcmcia_get_socket, .get_socket = sa1100_pcmcia_get_socket,
set_socket: sa1100_pcmcia_set_socket, .set_socket = sa1100_pcmcia_set_socket,
get_io_map: sa1100_pcmcia_get_io_map, .get_io_map = sa1100_pcmcia_get_io_map,
set_io_map: sa1100_pcmcia_set_io_map, .set_io_map = sa1100_pcmcia_set_io_map,
get_mem_map: sa1100_pcmcia_get_mem_map, .get_mem_map = sa1100_pcmcia_get_mem_map,
set_mem_map: sa1100_pcmcia_set_mem_map, .set_mem_map = sa1100_pcmcia_set_mem_map,
#ifdef CONFIG_PROC_FS #ifdef CONFIG_PROC_FS
proc_setup: sa1100_pcmcia_proc_setup .proc_setup = sa1100_pcmcia_proc_setup
#endif #endif
}; };
...@@ -927,7 +927,7 @@ sa1100_pcmcia_notifier(struct notifier_block *nb, unsigned long val, ...@@ -927,7 +927,7 @@ sa1100_pcmcia_notifier(struct notifier_block *nb, unsigned long val,
} }
static struct notifier_block sa1100_pcmcia_notifier_block = { static struct notifier_block sa1100_pcmcia_notifier_block = {
notifier_call: sa1100_pcmcia_notifier .notifier_call = sa1100_pcmcia_notifier
}; };
#endif #endif
...@@ -1148,6 +1148,9 @@ static int __init sa1100_pcmcia_init(void) ...@@ -1148,6 +1148,9 @@ static int __init sa1100_pcmcia_init(void)
#ifdef CONFIG_SA1100_GRAPHICSCLIENT #ifdef CONFIG_SA1100_GRAPHICSCLIENT
pcmcia_gcplus_init(); pcmcia_gcplus_init();
#endif #endif
#ifdef CONFIG_SA1100_H3600
pcmcia_h3600_init();
#endif
#ifdef CONFIG_SA1100_PANGOLIN #ifdef CONFIG_SA1100_PANGOLIN
pcmcia_pangolin_init(); pcmcia_pangolin_init();
#endif #endif
...@@ -1192,6 +1195,9 @@ static void __exit sa1100_pcmcia_exit(void) ...@@ -1192,6 +1195,9 @@ static void __exit sa1100_pcmcia_exit(void)
#ifdef CONFIG_SA1100_GRAPHICSCLIENT #ifdef CONFIG_SA1100_GRAPHICSCLIENT
pcmcia_gcplus_exit(); pcmcia_gcplus_exit();
#endif #endif
#ifdef CONFIG_SA1100_H3600
pcmcia_h3600_exit();
#endif
#ifdef CONFIG_SA1100_PANGOLIN #ifdef CONFIG_SA1100_PANGOLIN
pcmcia_pangolin_exit(); pcmcia_pangolin_exit();
#endif #endif
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
...@@ -159,14 +160,14 @@ static int gcplus_pcmcia_socket_suspend(int sock) ...@@ -159,14 +160,14 @@ static int gcplus_pcmcia_socket_suspend(int sock)
} }
static struct pcmcia_low_level gcplus_pcmcia_ops = { static struct pcmcia_low_level gcplus_pcmcia_ops = {
init: gcplus_pcmcia_init, .init = gcplus_pcmcia_init,
shutdown: gcplus_pcmcia_shutdown, .shutdown = gcplus_pcmcia_shutdown,
socket_state: gcplus_pcmcia_socket_state, .socket_state = gcplus_pcmcia_socket_state,
get_irq_info: gcplus_pcmcia_get_irq_info, .get_irq_info = gcplus_pcmcia_get_irq_info,
configure_socket: gcplus_pcmcia_configure_socket, .configure_socket = gcplus_pcmcia_configure_socket,
socket_init: gcplus_pcmcia_socket_init, .socket_init = gcplus_pcmcia_socket_init,
socket_suspend: gcplus_pcmcia_socket_suspend, .socket_suspend = gcplus_pcmcia_socket_suspend,
}; };
int __init pcmcia_gcplus_init(void) int __init pcmcia_gcplus_init(void)
......
...@@ -82,14 +82,14 @@ graphicsmaster_pcmcia_configure_socket(const struct pcmcia_configure *conf) ...@@ -82,14 +82,14 @@ graphicsmaster_pcmcia_configure_socket(const struct pcmcia_configure *conf)
} }
static struct pcmcia_low_level graphicsmaster_pcmcia_ops = { static struct pcmcia_low_level graphicsmaster_pcmcia_ops = {
init: graphicsmaster_pcmcia_init, .init = graphicsmaster_pcmcia_init,
shutdown: sa1111_pcmcia_shutdown, .shutdown = sa1111_pcmcia_shutdown,
socket_state: sa1111_pcmcia_socket_state, .socket_state = sa1111_pcmcia_socket_state,
get_irq_info: sa1111_pcmcia_get_irq_info, .get_irq_info = sa1111_pcmcia_get_irq_info,
configure_socket: graphicsmaster_pcmcia_configure_socket, .configure_socket = graphicsmaster_pcmcia_configure_socket,
socket_init: sa1111_pcmcia_socket_init, .socket_init = sa1111_pcmcia_socket_init,
socket_suspend: sa1111_pcmcia_socket_suspend, .socket_suspend = sa1111_pcmcia_socket_suspend,
}; };
int __init pcmcia_graphicsmaster_init(void) int __init pcmcia_graphicsmaster_init(void)
......
...@@ -10,6 +10,9 @@ ...@@ -10,6 +10,9 @@
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/h3600.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
static struct irqs { static struct irqs {
...@@ -185,13 +188,27 @@ static int h3600_pcmcia_socket_suspend(int sock) ...@@ -185,13 +188,27 @@ static int h3600_pcmcia_socket_suspend(int sock)
} }
struct pcmcia_low_level h3600_pcmcia_ops = { struct pcmcia_low_level h3600_pcmcia_ops = {
init: h3600_pcmcia_init, .init = h3600_pcmcia_init,
shutdown: h3600_pcmcia_shutdown, .shutdown = h3600_pcmcia_shutdown,
socket_state: h3600_pcmcia_socket_state, .socket_state = h3600_pcmcia_socket_state,
get_irq_info: h3600_pcmcia_get_irq_info, .get_irq_info = h3600_pcmcia_get_irq_info,
configure_socket: h3600_pcmcia_configure_socket, .configure_socket = h3600_pcmcia_configure_socket,
socket_init: h3600_pcmcia_socket_init, .socket_init = h3600_pcmcia_socket_init,
socket_suspend: h3600_pcmcia_socket_suspend, .socket_suspend = h3600_pcmcia_socket_suspend,
}; };
int __init pcmcia_h3600_init(void)
{
int ret = -ENODEV;
if (machine_is_h3600())
ret = sa1100_register_pcmcia(&h3600_pcmcia_ops);
return ret;
}
void __exit pcmcia_h3600_exit(void)
{
sa1100_unregister_pcmcia(&h3600_pcmcia_ops);
}
...@@ -97,14 +97,14 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__, ...@@ -97,14 +97,14 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
} }
static struct pcmcia_low_level jornada720_pcmcia_ops = { static struct pcmcia_low_level jornada720_pcmcia_ops = {
init: jornada720_pcmcia_init, .init = jornada720_pcmcia_init,
shutdown: sa1111_pcmcia_shutdown, .shutdown = sa1111_pcmcia_shutdown,
socket_state: sa1111_pcmcia_socket_state, .socket_state = sa1111_pcmcia_socket_state,
get_irq_info: sa1111_pcmcia_get_irq_info, .get_irq_info = sa1111_pcmcia_get_irq_info,
configure_socket: jornada720_pcmcia_configure_socket, .configure_socket = jornada720_pcmcia_configure_socket,
socket_init: sa1111_pcmcia_socket_init, .socket_init = sa1111_pcmcia_socket_init,
socket_suspend: sa1111_pcmcia_socket_suspend, .socket_suspend = sa1111_pcmcia_socket_suspend,
}; };
int __init pcmcia_jornada720_init(void) int __init pcmcia_jornada720_init(void)
......
...@@ -127,14 +127,14 @@ neponset_pcmcia_configure_socket(const struct pcmcia_configure *conf) ...@@ -127,14 +127,14 @@ neponset_pcmcia_configure_socket(const struct pcmcia_configure *conf)
} }
static struct pcmcia_low_level neponset_pcmcia_ops = { static struct pcmcia_low_level neponset_pcmcia_ops = {
init: neponset_pcmcia_init, .init = neponset_pcmcia_init,
shutdown: sa1111_pcmcia_shutdown, .shutdown = sa1111_pcmcia_shutdown,
socket_state: sa1111_pcmcia_socket_state, .socket_state = sa1111_pcmcia_socket_state,
get_irq_info: sa1111_pcmcia_get_irq_info, .get_irq_info = sa1111_pcmcia_get_irq_info,
configure_socket: neponset_pcmcia_configure_socket, .configure_socket = neponset_pcmcia_configure_socket,
socket_init: sa1111_pcmcia_socket_init, .socket_init = sa1111_pcmcia_socket_init,
socket_suspend: sa1111_pcmcia_socket_suspend, .socket_suspend = sa1111_pcmcia_socket_suspend,
}; };
int __init pcmcia_neponset_init(void) int __init pcmcia_neponset_init(void)
......
...@@ -10,6 +10,7 @@ ...@@ -10,6 +10,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
...@@ -159,13 +160,13 @@ static int pangolin_pcmcia_socket_suspend(int sock) ...@@ -159,13 +160,13 @@ static int pangolin_pcmcia_socket_suspend(int sock)
} }
static struct pcmcia_low_level pangolin_pcmcia_ops = { static struct pcmcia_low_level pangolin_pcmcia_ops = {
init: pangolin_pcmcia_init, .init = pangolin_pcmcia_init,
shutdown: pangolin_pcmcia_shutdown, .shutdown = pangolin_pcmcia_shutdown,
socket_state: pangolin_pcmcia_socket_state, .socket_state = pangolin_pcmcia_socket_state,
get_irq_info: pangolin_pcmcia_get_irq_info, .get_irq_info = pangolin_pcmcia_get_irq_info,
configure_socket: pangolin_pcmcia_configure_socket, .configure_socket = pangolin_pcmcia_configure_socket,
socket_init: pangolin_pcmcia_socket_init, .socket_init = pangolin_pcmcia_socket_init,
socket_suspend, pangolin_pcmcia_socket_suspend, socket_suspend, pangolin_pcmcia_socket_suspend,
}; };
......
...@@ -119,14 +119,14 @@ pfs168_pcmcia_configure_socket(const struct pcmcia_configure *conf) ...@@ -119,14 +119,14 @@ pfs168_pcmcia_configure_socket(const struct pcmcia_configure *conf)
} }
static struct pcmcia_low_level pfs168_pcmcia_ops = { static struct pcmcia_low_level pfs168_pcmcia_ops = {
init: pfs168_pcmcia_init, .init = pfs168_pcmcia_init,
shutdown: sa1111_pcmcia_shutdown, .shutdown = sa1111_pcmcia_shutdown,
socket_state: sa1111_pcmcia_socket_state, .socket_state = sa1111_pcmcia_socket_state,
get_irq_info: sa1111_pcmcia_get_irq_info, .get_irq_info = sa1111_pcmcia_get_irq_info,
configure_socket: pfs168_pcmcia_configure_socket, .configure_socket = pfs168_pcmcia_configure_socket,
socket_init: sa1111_pcmcia_socket_init, .socket_init = sa1111_pcmcia_socket_init,
socket_suspend: sa1111_pcmcia_socket_suspend, .socket_suspend = sa1111_pcmcia_socket_suspend,
}; };
int __init pcmcia_pfs168_init(void) int __init pcmcia_pfs168_init(void)
......
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/shannon.h> #include <asm/arch/shannon.h>
#include <asm/irq.h> #include <asm/irq.h>
#include "sa1100_generic.h" #include "sa1100_generic.h"
...@@ -151,14 +152,14 @@ static int shannon_pcmcia_socket_suspend(int sock) ...@@ -151,14 +152,14 @@ static int shannon_pcmcia_socket_suspend(int sock)
} }
static struct pcmcia_low_level shannon_pcmcia_ops = { static struct pcmcia_low_level shannon_pcmcia_ops = {
init: shannon_pcmcia_init, .init = shannon_pcmcia_init,
shutdown: shannon_pcmcia_shutdown, .shutdown = shannon_pcmcia_shutdown,
socket_state: shannon_pcmcia_socket_state, .socket_state = shannon_pcmcia_socket_state,
get_irq_info: shannon_pcmcia_get_irq_info, .get_irq_info = shannon_pcmcia_get_irq_info,
configure_socket: shannon_pcmcia_configure_socket, .configure_socket = shannon_pcmcia_configure_socket,
socket_init: shannon_pcmcia_socket_init, .socket_init = shannon_pcmcia_socket_init,
socket_suspend: shannon_pcmcia_socket_suspend, .socket_suspend = shannon_pcmcia_socket_suspend,
}; };
int __init pcmcia_shannon_init(void) int __init pcmcia_shannon_init(void)
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -13,6 +13,7 @@ obj-$(CONFIG_SERIAL_CORE) += core.o ...@@ -13,6 +13,7 @@ obj-$(CONFIG_SERIAL_CORE) += core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o obj-$(CONFIG_SERIAL_21285) += 21285.o
obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y) obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y)
obj-$(CONFIG_SERIAL_8250_CS) += 8250_cs.o obj-$(CONFIG_SERIAL_8250_CS) += 8250_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
obj-$(CONFIG_SERIAL_ANAKIN) += anakin.o obj-$(CONFIG_SERIAL_ANAKIN) += anakin.o
obj-$(CONFIG_SERIAL_AMBA) += amba.o obj-$(CONFIG_SERIAL_AMBA) += amba.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment