Commit e0d3bafd authored by Sri Deevi's avatar Sri Deevi Committed by Mauro Carvalho Chehab

V4L/DVB (10954): Add cx231xx USB driver

Signed-off-by: default avatarSrinivasa Deevi <srinivasa.deevi@conexant.com>
[mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages]
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 95b14fb2
...@@ -67,6 +67,7 @@ obj-$(CONFIG_VIDEO_MEYE) += meye.o ...@@ -67,6 +67,7 @@ obj-$(CONFIG_VIDEO_MEYE) += meye.o
obj-$(CONFIG_VIDEO_SAA7134) += saa7134/ obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_CX88) += cx88/
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
......
config VIDEO_CX231XX
tristate "Conexant cx231xx USB video capture support"
depends on VIDEO_DEV && I2C && INPUT
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
select VIDEOBUF_VMALLOC
select VIDEO_CX25840
select VIDEO_CX231XX_ALSA
---help---
This is a video4linux driver for Conexant 231xx USB based TV cards.
To compile this driver as a module, choose M here: the
module will be called cx231xx
config VIDEO_CX231XX_ALSA
tristate "Conexant Cx231xx ALSA audio module"
depends on VIDEO_CX231XX && SND
select SND_PCM
---help---
This is an ALSA driver for Cx231xx USB based TV cards.
To compile this driver as a module, choose M here: the
module will be called cx231xx-alsa
config VIDEO_CX231XX_DVB
tristate "DVB/ATSC Support for Cx231xx based TV cards"
depends on VIDEO_CX231XX && DVB_CORE
select VIDEOBUF_DVB
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
---help---
This adds support for DVB cards based on the
Conexant cx231xx chips.
cx231xx-objs := cx231xx-video.o cx231xx-i2c.o cx231xx-cards.o cx231xx-core.o \
cx231xx-avcore.o cx231xx-pcb-config.o cx231xx-vbi.o
cx231xx-alsa-objs := cx231xx-audio.o
obj-$(CONFIG_VIDEO_CX231XX) += cx231xx.o
obj-$(CONFIG_VIDEO_CX231XX_ALSA) += cx231xx-alsa.o
obj-$(CONFIG_VIDEO_CX231XX_DVB) += cx231xx-dvb.o
EXTRA_CFLAGS += -Idrivers/media/video
EXTRA_CFLAGS += -Idrivers/media/common/tuners
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
/*
* Conexant Cx231xx audio extension
*
* Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
* Based on em28xx driver
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/init.h>
#include <linux/sound.h>
#include <linux/spinlock.h>
#include <linux/soundcard.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/info.h>
#include <sound/initval.h>
#include <sound/control.h>
#include <media/v4l2-common.h>
#include "cx231xx.h"
#include "cx231xx-pcb-config.h"
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "activates debug info");
#define dprintk(fmt, arg...) do { \
if (debug) \
printk(KERN_INFO "cx231xx-audio %s: " fmt, \
__func__, ##arg); \
} while (0)
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static int cx231xx_isoc_audio_deinit(struct cx231xx *dev)
{
int i;
dprintk("Stopping isoc\n");
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
if(dev->adev.urb[i]) {
if (!irqs_disabled())
usb_kill_urb(dev->adev.urb[i]);
else
usb_unlink_urb(dev->adev.urb[i]);
usb_free_urb(dev->adev.urb[i]);
dev->adev.urb[i] = NULL;
kfree(dev->adev.transfer_buffer[i]);
dev->adev.transfer_buffer[i] = NULL;
}
}
return 0;
}
static void cx231xx_audio_isocirq(struct urb *urb)
{
struct cx231xx *dev = urb->context;
int i;
unsigned int oldptr;
int period_elapsed = 0;
int status;
unsigned char *cp;
unsigned int stride;
struct snd_pcm_substream *substream;
struct snd_pcm_runtime *runtime;
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
case -ESHUTDOWN:
return;
default: /* error */
dprintk("urb completition error %d.\n", urb->status);
break;
}
if (dev->adev.capture_pcm_substream) {
substream = dev->adev.capture_pcm_substream;
runtime = substream->runtime;
stride = runtime->frame_bits >> 3;
for (i = 0; i < urb->number_of_packets; i++) {
int length =
urb->iso_frame_desc[i].actual_length / stride;
cp = (unsigned char *)urb->transfer_buffer +
urb->iso_frame_desc[i].offset;
if (!length)
continue;
oldptr = dev->adev.hwptr_done_capture;
if (oldptr + length >= runtime->buffer_size) {
unsigned int cnt =
runtime->buffer_size - oldptr;
memcpy(runtime->dma_area + oldptr * stride, cp,
cnt * stride);
memcpy(runtime->dma_area, cp + cnt * stride,
length * stride - cnt * stride);
} else {
memcpy(runtime->dma_area + oldptr * stride, cp,
length * stride);
}
snd_pcm_stream_lock(substream);
dev->adev.hwptr_done_capture += length;
if (dev->adev.hwptr_done_capture >=
runtime->buffer_size)
dev->adev.hwptr_done_capture -=
runtime->buffer_size;
dev->adev.capture_transfer_done += length;
if (dev->adev.capture_transfer_done >=
runtime->period_size) {
dev->adev.capture_transfer_done -=
runtime->period_size;
period_elapsed = 1;
}
snd_pcm_stream_unlock(substream);
}
if (period_elapsed)
snd_pcm_period_elapsed(substream);
}
urb->status = 0;
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
cx231xx_errdev("resubmit of audio urb failed (error=%i)\n",
status);
}
return;
}
static int cx231xx_init_audio_isoc(struct cx231xx *dev)
{
int i, errCode;
int sb_size;
cx231xx_info("%s: Starting AUDIO transfers\n",__func__);
sb_size = CX231XX_NUM_AUDIO_PACKETS * dev->adev.max_pkt_size;
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
struct urb *urb;
int j, k;
dev->adev.transfer_buffer[i] = kmalloc(sb_size, GFP_ATOMIC);
if (!dev->adev.transfer_buffer[i])
return -ENOMEM;
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
cx231xx_errdev("usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
}
return -ENOMEM;
}
urb->dev = dev->udev;
urb->context = dev;
urb->pipe = usb_rcvisocpipe(dev->udev, dev->adev.end_point_addr);
urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->interval = 1;
urb->complete = cx231xx_audio_isocirq;
urb->number_of_packets = CX231XX_NUM_AUDIO_PACKETS;
urb->transfer_buffer_length = sb_size;
for (j = k = 0; j < CX231XX_NUM_AUDIO_PACKETS;
j++, k += dev->adev.max_pkt_size) {
urb->iso_frame_desc[j].offset = k;
urb->iso_frame_desc[j].length =
dev->adev.max_pkt_size;
}
dev->adev.urb[i] = urb;
}
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
errCode = usb_submit_urb(dev->adev.urb[i], GFP_ATOMIC);
if (errCode < 0) {
cx231xx_isoc_audio_deinit(dev);
return errCode;
}
}
return errCode;
}
static int cx231xx_cmd(struct cx231xx *dev, int cmd, int arg)
{
dprintk("%s transfer\n", (dev->adev.capture_stream == STREAM_ON)?
"stop" : "start");
switch (cmd) {
case CX231XX_CAPTURE_STREAM_EN:
if (dev->adev.capture_stream == STREAM_OFF && arg == 1) {
dev->adev.capture_stream = STREAM_ON;
cx231xx_init_audio_isoc(dev);
} else if (dev->adev.capture_stream == STREAM_ON && arg == 0) {
dev->adev.capture_stream = STREAM_OFF;
cx231xx_isoc_audio_deinit(dev);
} else {
cx231xx_errdev( "An underrun very likely occurred. "
"Ignoring it.\n");
}
return 0;
default:
return -EINVAL;
}
}
static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
size_t size)
{
struct snd_pcm_runtime *runtime = subs->runtime;
dprintk("Allocating vbuffer\n");
if (runtime->dma_area) {
if (runtime->dma_bytes > size)
return 0;
vfree(runtime->dma_area);
}
runtime->dma_area = vmalloc(size);
if (!runtime->dma_area)
return -ENOMEM;
runtime->dma_bytes = size;
return 0;
}
static struct snd_pcm_hardware snd_cx231xx_hw_capture = {
.info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT,
.rate_min = 48000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */
.period_bytes_min = 64, /* 12544/2, */
.period_bytes_max = 12544,
.periods_min = 2,
.periods_max = 98, /* 12544, */
};
static int snd_cx231xx_capture_open(struct snd_pcm_substream *substream)
{
struct cx231xx *dev = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
int ret = 0;
dprintk("opening device and trying to acquire exclusive lock\n");
if (!dev) {
cx231xx_errdev("BUG: cx231xx can't find device struct."
" Can't proceed with open\n");
return -ENODEV;
}
/* Sets volume, mute, etc */
dev->mute = 0;
/* set alternate setting for audio interface */
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 1); /* 1 - 48000 samples per sec */
if (ret < 0) {
cx231xx_errdev("failed to set alternate setting !\n");
return ret;
}
/* inform hardware to start streaming */
ret = cx231xx_capture_start(dev, 1, Audio);
runtime->hw = snd_cx231xx_hw_capture;
mutex_lock(&dev->lock);
dev->adev.users++;
mutex_unlock(&dev->lock);
snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
dev->adev.capture_pcm_substream = substream;
runtime->private_data = dev;
return 0;
}
static int snd_cx231xx_pcm_close(struct snd_pcm_substream *substream)
{
int ret;
struct cx231xx *dev = snd_pcm_substream_chip(substream);
dprintk("closing device\n");
/* set alternate setting for audio interface */
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0); /* 1 - 48000 samples per sec */
if (ret < 0) {
cx231xx_errdev("failed to set alternate setting !\n");
return ret;
}
/* inform hardware to start streaming */
ret = cx231xx_capture_start(dev, 0, Audio);
dev->mute = 1;
mutex_lock(&dev->lock);
dev->adev.users--;
mutex_unlock(&dev->lock);
if (dev->adev.users == 0 && dev->adev.shutdown == 1) {
dprintk("audio users: %d\n", dev->adev.users);
dprintk("disabling audio stream!\n");
dev->adev.shutdown = 0;
dprintk("released lock\n");
cx231xx_cmd(dev, CX231XX_CAPTURE_STREAM_EN, 0);
}
return 0;
}
static int snd_cx231xx_hw_capture_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
unsigned int channels, rate, format;
int ret;
dprintk("Setting capture parameters\n");
ret = snd_pcm_alloc_vmalloc_buffer(substream,
params_buffer_bytes(hw_params));
format = params_format(hw_params);
rate = params_rate(hw_params);
channels = params_channels(hw_params);
/* TODO: set up cx231xx audio chip to deliver the correct audio format,
current default is 48000hz multiplexed => 96000hz mono
which shouldn't matter since analogue TV only supports mono */
return 0;
}
static int snd_cx231xx_hw_capture_free(struct snd_pcm_substream *substream)
{
struct cx231xx *dev = snd_pcm_substream_chip(substream);
dprintk("Stop capture, if needed\n");
if (dev->adev.capture_stream == STREAM_ON)
cx231xx_cmd(dev, CX231XX_CAPTURE_STREAM_EN, CX231XX_STOP_AUDIO);
return 0;
}
static int snd_cx231xx_prepare(struct snd_pcm_substream *substream)
{
return 0;
}
static int snd_cx231xx_capture_trigger(struct snd_pcm_substream *substream,
int cmd)
{
struct cx231xx *dev = snd_pcm_substream_chip(substream);
int retval;
dprintk("Should %s capture\n", (cmd == SNDRV_PCM_TRIGGER_START)?
"start": "stop");
spin_lock(&dev->adev.slock);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
cx231xx_cmd(dev, CX231XX_CAPTURE_STREAM_EN, CX231XX_START_AUDIO);
retval = 0;
break;
case SNDRV_PCM_TRIGGER_STOP:
cx231xx_cmd(dev, CX231XX_CAPTURE_STREAM_EN, CX231XX_STOP_AUDIO);
retval = 0;
break;
default:
retval = -EINVAL;
}
spin_unlock(&dev->adev.slock);
return retval;
}
static snd_pcm_uframes_t snd_cx231xx_capture_pointer(struct snd_pcm_substream
*substream)
{
struct cx231xx *dev;
unsigned long flags;
snd_pcm_uframes_t hwptr_done;
dev = snd_pcm_substream_chip(substream);
spin_lock_irqsave(&dev->adev.slock, flags);
hwptr_done = dev->adev.hwptr_done_capture;
spin_unlock_irqrestore(&dev->adev.slock, flags);
return hwptr_done;
}
static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
unsigned long offset)
{
void *pageptr = subs->runtime->dma_area + offset;
return vmalloc_to_page(pageptr);
}
static struct snd_pcm_ops snd_cx231xx_pcm_capture = {
.open = snd_cx231xx_capture_open,
.close = snd_cx231xx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_cx231xx_hw_capture_params,
.hw_free = snd_cx231xx_hw_capture_free,
.prepare = snd_cx231xx_prepare,
.trigger = snd_cx231xx_capture_trigger,
.pointer = snd_cx231xx_capture_pointer,
.page = snd_pcm_get_vmalloc_page,
};
static int cx231xx_audio_init(struct cx231xx *dev)
{
struct cx231xx_audio *adev = &dev->adev;
struct snd_pcm *pcm;
struct snd_card *card;
static int devnr;
int err;
struct usb_interface *uif;
int i, isoc_pipe = 0;
if (dev->has_alsa_audio != 1) {
/* This device does not support the extension (in this case
the device is expecting the snd-usb-audio module or
doesn't have analog audio support at all) */
return 0;
}
cx231xx_info("cx231xx-audio.c: probing for cx231xx "
"non standard usbaudio\n");
card = snd_card_new(index[devnr], "Cx231xx Audio", THIS_MODULE, 0);
if (card == NULL) {
return -ENOMEM;
}
spin_lock_init(&adev->slock);
err = snd_pcm_new(card, "Cx231xx Audio", 0, 0, 1, &pcm);
if (err < 0) {
snd_card_free(card);
return err;
}
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx231xx_pcm_capture);
pcm->info_flags = 0;
pcm->private_data = dev;
strcpy(pcm->name, "Conexant cx231xx Capture");
strcpy(card->driver, "Conexant cx231xx Audio");
strcpy(card->shortname, "Cx231xx Audio");
strcpy(card->longname, "Conexant cx231xx Audio");
err = snd_card_register(card);
if (err < 0) {
snd_card_free(card);
return err;
}
adev->sndcard = card;
adev->udev = dev->udev;
/* compute alternate max packet sizes for Audio */
uif = dev->udev->actconfig->interface[dev->current_pcb_config.hs_config_info[0].interface_info.audio_index+1];
adev->end_point_addr = le16_to_cpu(uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress);
adev->num_alt = uif->num_altsetting;
cx231xx_info(": EndPoint Addr 0x%x, Alternate settings: %i\n", adev->end_point_addr,
adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
if (adev->alt_max_pkt_size == NULL) {
cx231xx_errdev("out of memory!\n");
return -ENOMEM;
}
for (i = 0; i < adev->num_alt ; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
wMaxPacketSize);
adev->alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
cx231xx_info("Alternate setting %i, max size= %i\n", i,
adev->alt_max_pkt_size[i]);
}
return 0;
}
static int cx231xx_audio_fini(struct cx231xx *dev)
{
if (dev == NULL)
return 0;
if (dev->has_alsa_audio != 1) {
/* This device does not support the extension (in this case
the device is expecting the snd-usb-audio module or
doesn't have analog audio support at all) */
return 0;
}
if (dev->adev.sndcard) {
snd_card_free(dev->adev.sndcard);
kfree(dev->adev.alt_max_pkt_size);
dev->adev.sndcard = NULL;
}
return 0;
}
static struct cx231xx_ops audio_ops = {
.id = CX231XX_AUDIO,
.name = "Cx231xx Audio Extension",
.init = cx231xx_audio_init,
.fini = cx231xx_audio_fini,
};
static int __init cx231xx_alsa_register(void)
{
return cx231xx_register_extension(&audio_ops);
}
static void __exit cx231xx_alsa_unregister(void)
{
cx231xx_unregister_extension(&audio_ops);
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
MODULE_DESCRIPTION("Cx231xx Audio driver");
module_init(cx231xx_alsa_register);
module_exit(cx231xx_alsa_unregister);
/*
cx231xx_avcore.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
This program contains the specific code to control the avdecoder chip and
other related usb control functions for cx231xx based chipset.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/version.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-chip-ident.h>
#include "cx231xx.h"
/*************************************************************************************
* C O L I B R I - B L O C K C O N T R O L functions *
*************************************************************************************/
int cx231xx_colibri_init_super_block(struct cx231xx *dev, u32 ref_count)
{
int status = 0;
u8 temp = 0;
u32 colibri_power_status = 0;
int i = 0;
/* super block initialize */
temp = (u8)(ref_count & 0xff);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE2, 2, temp, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE2, 2, &colibri_power_status, 1);
temp = (u8)((ref_count & 0x300) >> 8);
temp |= 0x40;
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE1, 2, temp, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_PLL2, 2, 0x0f, 1);
/* enable pll */
while(colibri_power_status != 0x18)
{
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_PWRDN, 2, 0x18, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
colibri_power_status &= 0xff;
if(status < 0) {
cx231xx_info(": Init Super Block failed in sending/receiving cmds\n");
break;
}
i++;
if( i == 10) {
cx231xx_info(": Init Super Block force break in loop !!!!\n");
status = -1;
break;
}
}
if(status < 0 )
return status;
/* start tuning filter */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE3, 2, 0x40, 1);
msleep(5);
/* exit tuning */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE3, 2, 0x00, 1);
return status;
}
int cx231xx_colibri_init_channels(struct cx231xx *dev)
{
int status = 0;
/* power up all 3 channels, clear pd_buffer */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_PWRDN_CLAMP_CH1, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_PWRDN_CLAMP_CH2, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_PWRDN_CLAMP_CH3, 2, 0x00, 1);
/* Enable quantizer calibration */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_COM_QUANT, 2, 0x02, 1);
/* channel initialize, force modulator (fb) reset */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_FB_FRCRST_CH1, 2, 0x17, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_FB_FRCRST_CH2, 2, 0x17, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_FB_FRCRST_CH3, 2, 0x17, 1);
/* start quantilizer calibration */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_CAL_ATEST_CH1, 2, 0x10, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_CAL_ATEST_CH2, 2, 0x10, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_CAL_ATEST_CH3, 2, 0x10, 1);
msleep(5);
/* exit modulator (fb) reset */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_FB_FRCRST_CH1, 2, 0x07, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_FB_FRCRST_CH2, 2, 0x07, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_FB_FRCRST_CH3, 2, 0x07, 1);
/* enable the pre_clamp in each channel for single-ended input */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_NTF_PRECLMP_EN_CH1, 2, 0xf0, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_NTF_PRECLMP_EN_CH2, 2, 0xf0, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_NTF_PRECLMP_EN_CH3, 2, 0xf0, 1);
/* use diode instead of resistor, so set term_en to 0, res_en to 0 */
status = cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8, ADC_QGAIN_RES_TRM_CH1, 3, 7, 0x00);
status = cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8, ADC_QGAIN_RES_TRM_CH2, 3, 7, 0x00);
status = cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8, ADC_QGAIN_RES_TRM_CH3, 3, 7, 0x00);
/* dynamic element matching off */
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_DCSERVO_DEM_CH1, 2, 0x03, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_DCSERVO_DEM_CH2, 2, 0x03, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_DCSERVO_DEM_CH3, 2, 0x03, 1);
return status;
}
int cx231xx_colibri_setup_AFE_for_baseband(struct cx231xx *dev)
{
u32 c_value = 0;
int status = 0;
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_PWRDN_CLAMP_CH2, 2, &c_value, 1);
c_value &= (~(0x50));
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_PWRDN_CLAMP_CH2, 2, c_value, 1);
return status;
}
/*
we have 3 channel
channel 1 ----- pin 1 to pin4(in reg is 1-4)
channel 2 ----- pin 5 to pin8(in reg is 5-8)
channel 3 ----- pin 9 to pin 12(in reg is 9-11)
*/
int cx231xx_colibri_set_input_mux(struct cx231xx *dev, u32 input_mux)
{
u8 ch1_setting = (u8)input_mux;
u8 ch2_setting = (u8)(input_mux >> 8);
u8 ch3_setting = (u8)(input_mux >> 16);
int status = 0;
u32 value = 0;
if(ch1_setting != 0)
{
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH1, 2, &value, 1);
value &= (!INPUT_SEL_MASK);
value |= (ch1_setting-1)<<4;
value &= 0xff;
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH1, 2, value, 1);
}
if(ch2_setting != 0)
{
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH2, 2, &value, 1);
value &= (!INPUT_SEL_MASK);
value |= (ch2_setting-1)<<4;
value &= 0xff;
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH2, 2, value, 1);
}
/* For ch3_setting, the value to put in the register is 7 less than the input number */
if(ch3_setting != 0)
{
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH3, 2, &value, 1);
value &= (!INPUT_SEL_MASK);
value |= (ch3_setting-1)<<4;
value &= 0xff;
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH3, 2, value, 1);
}
return status;
}
int cx231xx_colibri_set_mode(struct cx231xx *dev, enum AFE_MODE mode)
{
int status = 0;
switch(mode) {
case AFE_MODE_LOW_IF:
/* SetupAFEforLowIF(); */
break;
case AFE_MODE_BASEBAND:
status = cx231xx_colibri_setup_AFE_for_baseband(dev);
break;
case AFE_MODE_EU_HI_IF:
/* SetupAFEforEuHiIF(); */
break;
case AFE_MODE_US_HI_IF:
/* SetupAFEforUsHiIF(); */
break;
case AFE_MODE_JAPAN_HI_IF:
/* SetupAFEforJapanHiIF(); */
break;
}
if((mode != dev->colibri_mode) && (dev->video_input == CX231XX_VMUX_TELEVISION)) {
status = cx231xx_colibri_adjust_ref_count(dev, CX231XX_VMUX_TELEVISION);
}
dev->colibri_mode = mode;
return status;
}
/* For power saving in the EVK */
int cx231xx_colibri_update_power_control(struct cx231xx *dev, AV_MODE avmode)
{
u32 colibri_power_status = 0;
int status = 0;
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
case CX231XX_BOARD_CNXT_RDU_250:
if(avmode==POLARIS_AVMODE_ANALOGT_TV)
{
while(colibri_power_status != 0x18) {
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, 0x18, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
if(status < 0 )
break;
}
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x00, 1);
}
else if(avmode==POLARIS_AVMODE_DIGITAL) {
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x70, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x70, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x70, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
colibri_power_status |=0x07;
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, colibri_power_status, 1);
}
else if(avmode==POLARIS_AVMODE_ENXTERNAL_AV) {
while(colibri_power_status != 0x18) {
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, 0x18, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
if(status < 0 )
break;
}
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x00, 1);
}
else {
cx231xx_info("Invalid AV mode input\n");
status = -1;
}
break;
default:
if(avmode==POLARIS_AVMODE_ANALOGT_TV)
{
while(colibri_power_status != 0x18) {
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, 0x18, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
if(status < 0 )
break;
}
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x40, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x40, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x00, 1);
}
else if(avmode==POLARIS_AVMODE_DIGITAL) {
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x70, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x70, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x70, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
colibri_power_status |=0x07;
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, colibri_power_status, 1);
}
else if(avmode==POLARIS_AVMODE_ENXTERNAL_AV) {
while(colibri_power_status != 0x18) {
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, 0x18, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2, &colibri_power_status, 1);
if(status < 0 )
break;
}
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x40, 1);
}
else {
cx231xx_info("Invalid AV mode input\n");
status = -1;
}
} /* switch */
return status;
}
int cx231xx_colibri_adjust_ref_count(struct cx231xx *dev, u32 video_input)
{
u32 input_mode = 0;
u32 ntf_mode = 0;
int status = 0;
dev->video_input = video_input;
if(video_input == CX231XX_VMUX_TELEVISION) {
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH3, 2, &input_mode, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH3, 2, &ntf_mode, 1);
}
else {
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_INPUT_CH1, 2, &input_mode, 1);
status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH1, 2, &ntf_mode, 1);
}
input_mode = (ntf_mode & 0x3) | ((input_mode & 0x6) << 1);
switch(input_mode)
{
case SINGLE_ENDED:
dev->colibri_ref_count = 0x23C;
break;
case LOW_IF:
dev->colibri_ref_count = 0x24C;
break;
case EU_IF:
dev->colibri_ref_count = 0x258;
break;
case US_IF:
dev->colibri_ref_count = 0x260;
break;
default:
break;
}
status = cx231xx_colibri_init_super_block(dev, dev->colibri_ref_count);
return status;
}
/*************************************************************************************
* V I D E O / A U D I O D E C O D E R C O N T R O L functions *
*************************************************************************************/
int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
{
int status = 0;
switch(INPUT(input)->type) {
case CX231XX_VMUX_COMPOSITE1:
case CX231XX_VMUX_SVIDEO:
if((dev->current_pcb_config.type == USB_BUS_POWER) &&
(dev->power_mode != POLARIS_AVMODE_ENXTERNAL_AV)) {
status = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ENXTERNAL_AV); /* External AV */
if (status < 0) {
cx231xx_errdev("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
}
}
status = cx231xx_set_decoder_video_input(dev, INPUT(input)->type, INPUT(input)->vmux);
break;
case CX231XX_VMUX_TELEVISION:
case CX231XX_VMUX_CABLE:
if((dev->current_pcb_config.type == USB_BUS_POWER) &&
(dev->power_mode != POLARIS_AVMODE_ANALOGT_TV)) {
status = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ANALOGT_TV); /* Tuner */
if (status < 0) {
cx231xx_errdev("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
}
}
status = cx231xx_set_decoder_video_input(dev, CX231XX_VMUX_COMPOSITE1, INPUT(input)->vmux);
break;
default:
cx231xx_errdev("%s: cx231xx_set_power_mode : Unknown Input %d !\n",
__func__, INPUT(input)->type);
break;
}
/* save the selection */
dev->video_input = input;
return status;
}
int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input)
{
int status = 0;
u32 value = 0;
if(pin_type != dev->video_input) {
status = cx231xx_colibri_adjust_ref_count(dev, pin_type);
if(status < 0 ) {
cx231xx_errdev("%s: cx231xx_colibri_adjust_ref_count :Failed to set Colibri input mux - errCode [%d]!\n",
__func__, status);
return status;
}
}
/* call colibri block to set video inputs */
status = cx231xx_colibri_set_input_mux(dev, input);
if(status < 0 ) {
cx231xx_errdev("%s: cx231xx_colibri_set_input_mux :Failed to set Colibri input mux - errCode [%d]!\n",
__func__, status);
return status;
}
switch(pin_type) {
case CX231XX_VMUX_COMPOSITE1:
{
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, &value, 4);
value |= (0<<13)|(1<<4);
value &= ~(1<<5);
value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
value |= 0x1000000; /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, value, 4);
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2, &value, 4);
value |= (1<<7);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2, value, 4);
/* Set vip 1.1 output mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
OUT_CTRL1, FLD_OUT_MODE, OUT_MODE_VIP11);
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, status);
return status;
}
/* Read the DFE_CTRL1 register */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, &value, 4);
/* enable the VBI_GATE_EN */
value |= FLD_VBI_GATE_EN;
/* Enable the auto-VGA enable */
value |= FLD_VGA_AUTO_EN;
/* Write it back */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, value, 4);
/* Disable auto config of registers */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_ACFG_DIS, cx231xx_set_field(FLD_ACFG_DIS, 1));
/* Set CVBS input mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_INPUT_MODE,
cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
}
break;
case CX231XX_VMUX_SVIDEO:
{
/* Disable the use of DIF */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, &value, 4);
value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
value |= 0x1000010; /* set FUNC_MODE[24:23] = 2
IF_MOD[22:15] = 0 DCR_BYP_CH2[4:4] = 1; */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, value, 4);
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, status);
return status;
}
/* Read the DFE_CTRL1 register */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, &value, 4);
/* enable the VBI_GATE_EN */
value |= FLD_VBI_GATE_EN;
/* Enable the auto-VGA enable */
value |= FLD_VGA_AUTO_EN;
/* Write it back */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, value, 4);
/* Disable auto config of registers */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_ACFG_DIS, cx231xx_set_field(FLD_ACFG_DIS, 1));
/* Set YC input mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_INPUT_MODE,
cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_YC_1));
/* Chroma to ADC2 */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, &value, 4);
value |= FLD_CHROMA_IN_SEL; /* set the chroma in select */
/* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8) This sets them to use video
rather than audio. Only one of the two will be in use. */
value &= ~(FLD_VGA_SEL_CH2 | FLD_VGA_SEL_CH3);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, value, 4);
status = cx231xx_colibri_set_mode(dev, AFE_MODE_BASEBAND);
}
break;
case CX231XX_VMUX_TELEVISION:
case CX231XX_VMUX_CABLE:
default:
{
switch(dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
case CX231XX_BOARD_CNXT_RDU_250:
{
/* Disable the use of DIF */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, &value, 4);
value |= (0<<13)|(1<<4);
value &= ~(1<<5);
value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
value |= 0x1000000; /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, value, 4);
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2, &value, 4);
value |= (1<<7);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2, value, 4);
/* Set vip 1.1 output mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
OUT_CTRL1, FLD_OUT_MODE, OUT_MODE_VIP11);
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, status);
return status;
}
/* Read the DFE_CTRL1 register */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, &value, 4);
/* enable the VBI_GATE_EN */
value |= FLD_VBI_GATE_EN;
/* Enable the auto-VGA enable */
value |= FLD_VGA_AUTO_EN;
/* Write it back */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, value, 4);
/* Disable auto config of registers */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_ACFG_DIS, cx231xx_set_field(FLD_ACFG_DIS, 1));
/* Set CVBS input mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_INPUT_MODE,
cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
}
break;
default:
{
/* Enable the DIF for the tuner */
/* Reinitialize the DIF */
status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, status);
return status;
}
/* Make sure bypass is cleared */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_MISC_CTRL, 2, &value, 4);
/* Clear the bypass bit */
value &= ~FLD_DIF_DIF_BYPASS;
/* Enable the use of the DIF block */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_MISC_CTRL, 2, value, 4);
/* Read the DFE_CTRL1 register */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, &value, 4);
/* Disable the VBI_GATE_EN */
value &= ~FLD_VBI_GATE_EN;
/* Enable the auto-VGA enable, AGC, and set the skip count to 2 */
value |= FLD_VGA_AUTO_EN | FLD_AGC_AUTO_EN | 0x00200000;
/* Write it back */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, value, 4);
/* Wait 15 ms */
msleep(1);
/* Disable the auto-VGA enable AGC */
value &= ~(FLD_VGA_AUTO_EN);
/* Write it back */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL1, 2, value, 4);
/* Enable Polaris B0 AGC output */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL, 2, &value, 4);
value |=(FLD_OEF_AGC_RF)|(FLD_OEF_AGC_IFVGA)|(FLD_OEF_AGC_IF);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL, 2, value, 4);
/* Set vip 1.1 output mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
OUT_CTRL1, FLD_OUT_MODE, OUT_MODE_VIP11);
/* Disable auto config of registers */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_ACFG_DIS, cx231xx_set_field(FLD_ACFG_DIS, 1));
/* Set CVBS input mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
MODE_CTRL, FLD_INPUT_MODE,
cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
/* Set some bits in AFE_CTRL so that channel 2 or 3 is ready to receive audio */
/* Clear clamp for channels 2 and 3 (bit 16-17) */
/* Clear droop comp (bit 19-20) */
/* Set VGA_SEL (for audio control) (bit 7-8) */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, &value, 4);
value |= FLD_VGA_SEL_CH3 | FLD_VGA_SEL_CH2;
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AFE_CTRL, 2, value, 4);
}
break;
}
}
break;
}
/* Set raw VBI mode */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
OUT_CTRL1, FLD_VBIHACTRAW_EN,
cx231xx_set_field(FLD_VBIHACTRAW_EN, 1));
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2, &value, 4);
if(value & 0x02) {
value |=(1<<19);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2, value, 4);
}
return status;
}
/*
* Handle any video-mode specific overrides that are different on a per video standards
* basis after touching the MODE_CTRL register which resets many values for autodetect
*/
int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev)
{
int status = 0;
cx231xx_info("do_mode_ctrl_overrides : 0x%x\n", (unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL3, 2, 0xCD3F0280, 4);
if( dev->norm & (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_PAL_M) ) {
cx231xx_info("do_mode_ctrl_overrides NTSC\n");
/* Move the close caption lines out of active video, adjust the active video start point */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL, FLD_VBLANK_CNT,0x18);
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL, FLD_VACTIVE_CNT,0x1E6000);
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL, FLD_V656BLANK_CNT,0x1E000000);
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
HORIZ_TIM_CTRL, FLD_HBLANK_CNT,
cx231xx_set_field(FLD_HBLANK_CNT, 0x79));
} else if ( dev->norm & ( V4L2_STD_PAL_B | V4L2_STD_PAL_G | V4L2_STD_PAL_D |
V4L2_STD_PAL_I | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc) ) {
cx231xx_info("do_mode_ctrl_overrides PAL\n");
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL, FLD_VBLANK_CNT,0x24);
/* Adjust the active video horizontal start point */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
HORIZ_TIM_CTRL, FLD_HBLANK_CNT,
cx231xx_set_field(FLD_HBLANK_CNT, 0x85));
} else if (dev->norm & ( V4L2_STD_SECAM_B | V4L2_STD_SECAM_D | V4L2_STD_SECAM_G |
V4L2_STD_SECAM_K | V4L2_STD_SECAM_K1 | V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC) ) {
cx231xx_info("do_mode_ctrl_overrides SECAM\n");
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL, FLD_VBLANK_CNT,0x24);
/* Adjust the active video horizontal start point */
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
HORIZ_TIM_CTRL, FLD_HBLANK_CNT,
cx231xx_set_field(FLD_HBLANK_CNT, 0x85));
}
return status;
}
int cx231xx_set_audio_input(struct cx231xx *dev, u8 input)
{
int status = 0;
enum AUDIO_INPUT ainput = AUDIO_INPUT_LINE;
switch(INPUT(input)->amux) {
case CX231XX_AMUX_VIDEO:
ainput = AUDIO_INPUT_TUNER_TV;
break;
case CX231XX_AMUX_LINE_IN:
status = cx231xx_flatiron_set_audio_input(dev, input);
ainput = AUDIO_INPUT_LINE;
break;
default:
break;
}
status = cx231xx_set_audio_decoder_input(dev, ainput);
return status;
}
int cx231xx_set_audio_decoder_input(struct cx231xx *dev, enum AUDIO_INPUT audio_input)
{
u32 dwval;
int status;
u32 gen_ctrl;
u32 value = 0;
/* Put it in soft reset */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2, &gen_ctrl, 1);
gen_ctrl |= 1;
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2, gen_ctrl, 1);
switch(audio_input)
{
case AUDIO_INPUT_LINE:
/* setup AUD_IO control from Merlin paralle output */
value = cx231xx_set_field(FLD_AUD_CHAN1_SRC, AUD_CHAN_SRC_PARALLEL);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AUD_IO_CTRL, 2, value, 4);
/* setup input to Merlin, SRC2 connect to AC97
bypass upsample-by-2, slave mode, sony mode, left justify
adr 091c, dat 01000000 */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AC97_CTL, 2, &dwval, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AC97_CTL, 2, (dwval | FLD_AC97_UP2X_BYPASS), 4);
/* select the parallel1 and SRC3 */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, BAND_OUT_SEL, 2,
cx231xx_set_field(FLD_SRC3_IN_SEL, 0x0)|
cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x0)|
cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x0), 4);
/* unmute all, AC97 in, independence mode
adr 08d0, data 0x00063073 */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_CTL1, 2, 0x00063073, 4);
/* set AVC maximum threshold, adr 08d4, dat ffff0024 */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_VOL_CTL, 2, &dwval, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_VOL_CTL, 2,
(dwval | FLD_PATH1_AVC_THRESHOLD), 4);
/* set SC maximum threshold, adr 08ec, dat ffffb3a3 */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_SC_CTL, 2, &dwval, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_SC_CTL, 2,
(dwval | FLD_PATH1_SC_THRESHOLD), 4);
break;
case AUDIO_INPUT_TUNER_TV:
default:
/* Setup SRC sources and clocks */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, BAND_OUT_SEL, 2,
cx231xx_set_field(FLD_SRC6_IN_SEL, 0x00)|
cx231xx_set_field(FLD_SRC6_CLK_SEL, 0x01)|
cx231xx_set_field(FLD_SRC5_IN_SEL, 0x00)|
cx231xx_set_field(FLD_SRC5_CLK_SEL, 0x02)|
cx231xx_set_field(FLD_SRC4_IN_SEL, 0x02)|
cx231xx_set_field(FLD_SRC4_CLK_SEL, 0x03)|
cx231xx_set_field(FLD_SRC3_IN_SEL, 0x00)|
cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x00)|
cx231xx_set_field(FLD_BASEBAND_BYPASS_CTL, 0x00)|
cx231xx_set_field(FLD_AC97_SRC_SEL, 0x03)|
cx231xx_set_field(FLD_I2S_SRC_SEL, 0x00)|
cx231xx_set_field(FLD_PARALLEL2_SRC_SEL, 0x02)|
cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x01) , 4);
/* Setup the AUD_IO control */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AUD_IO_CTRL, 2,
cx231xx_set_field(FLD_I2S_PORT_DIR, 0x00)|
cx231xx_set_field(FLD_I2S_OUT_SRC, 0x00)|
cx231xx_set_field(FLD_AUD_CHAN3_SRC,0x00)|
cx231xx_set_field(FLD_AUD_CHAN2_SRC, 0x00)|
cx231xx_set_field(FLD_AUD_CHAN1_SRC,0x03 ), 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_CTL1, 2, 0x1F063870, 4);
/* setAudioStandard(_audio_standard); */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_CTL1, 2, 0x00063870, 4);
switch(dev->model)
{
case CX231XX_BOARD_CNXT_RDE_250:
case CX231XX_BOARD_CNXT_RDU_250:
status = cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
CHIP_CTRL, FLD_SIF_EN,
cx231xx_set_field(FLD_SIF_EN, 1));
break;
default:
break;
}
break;
case AUDIO_INPUT_TUNER_FM:
/* use SIF for FM radio
setupFM();
setAudioStandard(_audio_standard);
*/
break;
case AUDIO_INPUT_MUTE:
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PATH1_CTL1, 2, 0x1F011012, 4);
break;
}
/* Take it out of soft reset */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2, &gen_ctrl, 1);
gen_ctrl &= ~1;
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2, gen_ctrl, 1);
return status;
}
/* Set resolution of the video */
int cx231xx_resolution_set(struct cx231xx *dev)
{
int width, height;
u32 hscale, vscale;
int status = 0;
width = dev->width;
height = dev->height;
get_scale(dev,width, height,&hscale, &vscale);
/* set horzontal scale */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, HSCALE_CTRL, 2, hscale, 4);
/* set vertical scale */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, VSCALE_CTRL, 2, vscale, 4);
return status;
}
/*************************************************************************************
* C H I P Specific C O N T R O L functions *
*************************************************************************************/
int cx231xx_init_ctrl_pin_status(struct cx231xx *dev)
{
u32 value;
int status = 0;
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL, 2, &value, 4);
value |=(~dev->board.ctl_pin_status_mask);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL, 2, value, 4);
return status;
}
int cx231xx_set_agc_analog_digital_mux_select(struct cx231xx *dev, u8 analog_or_digital)
{
int status = 0;
/* first set the direction to output */
status = cx231xx_set_gpio_direction(dev, dev->board.agc_analog_digital_select_gpio, 1);
/* 0 - demod ; 1 - Analog mode */
status = cx231xx_set_gpio_value(dev, dev->board.agc_analog_digital_select_gpio,
analog_or_digital);
return status;
}
int cx231xx_enable_i2c_for_tuner(struct cx231xx *dev, u8 I2CIndex)
{
u8 value[4] ={0,0,0,0};
int status = 0;
cx231xx_info("Changing the i2c port for tuner to %d\n",I2CIndex);
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
if(status < 0)
return status;
if(I2CIndex==I2C_1) {
if(value[0] & I2C_DEMOD_EN) {
value[0] &= ~I2C_DEMOD_EN;
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
}
} else {
if(!(value[0] & I2C_DEMOD_EN)) {
value[0] |= I2C_DEMOD_EN;
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
}
}
return status;
}
/*************************************************************************************
* D I F - B L O C K C O N T R O L functions *
*************************************************************************************/
int cx231xx_dif_configure_C2HH_for_low_IF(struct cx231xx *dev, u32 mode,
u32 function_mode, u32 standard)
{
int status = 0;
if(mode == V4L2_TUNER_RADIO) {
/* C2HH */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xFF); /* IF_MODE */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
}
else {
switch(standard) {
case V4L2_STD_NTSC_M: /* 75 IRE Setup */
case V4L2_STD_NTSC_M_JP: /* Japan, 0 IRE Setup */
case V4L2_STD_PAL_M:
case V4L2_STD_PAL_N:
case V4L2_STD_PAL_Nc:
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xb); /* IF_MODE */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AUD_IO_CTRL, 0, 31, 0x00000003); /* 0x124, AUD_CHAN1_SRC = 0x3 */
break;
case V4L2_STD_PAL_B:
case V4L2_STD_PAL_G:
/* C2HH setup */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xE); /* IF_MODE */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
break;
case V4L2_STD_PAL_D:
case V4L2_STD_PAL_I:
case V4L2_STD_SECAM_L:
case V4L2_STD_SECAM_LC:
case V4L2_STD_SECAM_B:
case V4L2_STD_SECAM_D:
case V4L2_STD_SECAM_G:
case V4L2_STD_SECAM_K:
case V4L2_STD_SECAM_K1:
/* C2HH setup */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xF); /* IF_MODE */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
break;
case DIF_USE_BASEBAND:
default:
/* do nothing to config C2HH for baseband */
break;
}
}
return status;
}
int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
{
int status = 0;
u32 dif_misc_ctrl_value = 0;
u32 func_mode = 0;
cx231xx_info("%s: setStandard to %x\n",__func__,standard);
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_MISC_CTRL, 2, &dif_misc_ctrl_value, 4);
if(standard != DIF_USE_BASEBAND )
dev->norm = standard;
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
case CX231XX_BOARD_CNXT_RDU_250:
func_mode=0x03;
break;
default:
func_mode=0x01;
}
status = cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode, func_mode, standard);
if(standard == DIF_USE_BASEBAND ) { /* base band */
/* There is a different SRC_PHASE_INC value for baseband vs. DIF */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_PHASE_INC, 2, 0xDF7DF83, 4);
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_MISC_CTRL, 2, &dif_misc_ctrl_value, 4);
dif_misc_ctrl_value |= FLD_DIF_DIF_BYPASS;
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_MISC_CTRL, 2, dif_misc_ctrl_value, 4);
} else if ( standard & (V4L2_STD_PAL_B | V4L2_STD_PAL_G) ) {
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL3, 0, 31, 0x00008800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_REF, 0, 31, 0x444C1380);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_INT_CURRENT, 0, 31, 0x26001700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_RF_CURRENT, 0, 31, 0x00002660);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VIDEO_AGC_CTRL, 0, 31, 0x72500800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VID_AUD_OVERRIDE, 0, 31, 0x27000100);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AV_SEP_CTRL, 0, 31, 0x3F3530EC);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_COMP_FLT_CTRL, 0, 31, 0x00A653A8);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_PHASE_INC, 0, 31, 0x1befbf06);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_GAIN_CONTROL, 0, 31, 0x000035e8);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_RPT_VARIANCE, 0, 31, 0x00000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |=0x3a013F11;
} else if( standard & V4L2_STD_PAL_D ) {
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL3, 0, 31, 0x00008800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_REF, 0, 31, 0x444C1380);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_INT_CURRENT, 0, 31, 0x26001700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_RF_CURRENT, 0, 31, 0x00002660);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VIDEO_AGC_CTRL, 0, 31, 0x72500800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VID_AUD_OVERRIDE, 0, 31, 0x27000100);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AV_SEP_CTRL, 0, 31, 0x3F3934EA);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_COMP_FLT_CTRL, 0, 31, 0x00000000);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_PHASE_INC, 0, 31, 0x1befbf06);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_GAIN_CONTROL, 0, 31, 0x000035e8);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_RPT_VARIANCE, 0, 31, 0x00000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |=0x3a023F11;
} else if( standard & V4L2_STD_PAL_I ) {
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL3, 0, 31, 0x00008800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_REF, 0, 31, 0x444C1380);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_INT_CURRENT, 0, 31, 0x26001700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_RF_CURRENT, 0, 31, 0x00002660);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VIDEO_AGC_CTRL, 0, 31, 0x72500800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VID_AUD_OVERRIDE, 0, 31, 0x27000100);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AV_SEP_CTRL, 0, 31, 0x5F39A934);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_COMP_FLT_CTRL, 0, 31, 0x00000000);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_PHASE_INC, 0, 31, 0x1befbf06);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_GAIN_CONTROL, 0, 31, 0x000035e8);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_RPT_VARIANCE, 0, 31, 0x00000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |=0x3a033F11;
} else if( standard & V4L2_STD_PAL_M ) {
/* improved Low Frequency Phase Noise */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL, 2, 0xFF01FF0C, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL1, 2, 0xbd038c85, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL2, 2, 0x1db4640a, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL3, 2, 0x00008800, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, 0x444C1380, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_INT_CURRENT, 2, 0x26001700, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_RF_CURRENT, 2, 0x00002660, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VIDEO_AGC_CTRL, 2, 0x72500800, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VID_AUD_OVERRIDE, 2, 0x27000100, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AV_SEP_CTRL, 2, 0x012c405d, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_COMP_FLT_CTRL, 2, 0x009f50c1, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_PHASE_INC, 2, 0x1befbf06, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_GAIN_CONTROL, 2, 0x000035e8, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SOFT_RST_CTRL_REVB, 2, 0x00000000, 4);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |= 0x3A0A3F10;
} else if( standard & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc) ) {
/* improved Low Frequency Phase Noise */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL, 2, 0xFF01FF0C, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL1, 2, 0xbd038c85, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL2, 2, 0x1db4640a, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL3, 2, 0x00008800, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_IF_REF, 2, 0x444C1380, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_IF_INT_CURRENT, 2, 0x26001700, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_RF_CURRENT, 2, 0x00002660, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_VIDEO_AGC_CTRL, 2, 0x72500800, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_VID_AUD_OVERRIDE, 2, 0x27000100, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AV_SEP_CTRL, 2, 0x012c405d, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_COMP_FLT_CTRL, 2, 0x009f50c1, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_SRC_PHASE_INC, 2, 0x1befbf06, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_SRC_GAIN_CONTROL, 2, 0x000035e8, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_SOFT_RST_CTRL_REVB, 2, 0x00000000, 4);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value = 0x3A093F10;
} else if( standard & ( V4L2_STD_SECAM_B | V4L2_STD_SECAM_D | V4L2_STD_SECAM_G |
V4L2_STD_SECAM_K | V4L2_STD_SECAM_K1) ) {
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL3, 0, 31, 0x00008800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_REF, 0, 31, 0x888C0380);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_IF, 0, 31, 0xe0262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_INT, 0, 31, 0xc2171700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_RF, 0, 31, 0xc2262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_INT_CURRENT, 0, 31, 0x26001700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_RF_CURRENT, 0, 31, 0x00002660);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VID_AUD_OVERRIDE, 0, 31, 0x27000100);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_COMP_FLT_CTRL, 0, 31, 0x00000000);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_PHASE_INC, 0, 31, 0x1befbf06);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_GAIN_CONTROL, 0, 31, 0x000035e8);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_RPT_VARIANCE, 0, 31, 0x00000000);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VIDEO_AGC_CTRL, 0, 31, 0xf4000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |=0x3a023F11;
} else if( standard & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC) ) {
/* Is it SECAM_L1? */
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_PLL_CTRL3, 0, 31, 0x00008800);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_REF, 0, 31, 0x888C0380);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_IF, 0, 31, 0xe0262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_INT, 0, 31, 0xc2171700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_CTRL_RF, 0, 31, 0xc2262600);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_IF_INT_CURRENT, 0, 31, 0x26001700);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AGC_RF_CURRENT, 0, 31, 0x00002660);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VID_AUD_OVERRIDE, 0, 31, 0x27000100);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_COMP_FLT_CTRL, 0, 31, 0x00000000);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_PHASE_INC, 0, 31, 0x1befbf06);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_SRC_GAIN_CONTROL, 0, 31, 0x000035e8);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_RPT_VARIANCE, 0, 31, 0x00000000);
status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, DIF_VIDEO_AGC_CTRL, 0, 31, 0xf2560000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |=0x3a023F11;
} else { /* V4L2_STD_NTSC_M (75 IRE Setup) Or V4L2_STD_NTSC_M_JP (Japan, 0 IRE Setup) */
/* For NTSC the centre frequency of video coming out of sidewinder is
around 7.1MHz or 3.6MHz depending on the spectral inversion.
so for a non spectrally inverted channel the pll freq word is 0x03420c49
*/
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL, 2, 0x6503BC0C, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL1, 2, 0xBD038C85, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL2, 2, 0x1DB4640A, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_PLL_CTRL3, 2, 0x00008800, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_IF_REF, 2, 0x444C0380, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_IF_INT_CURRENT, 2, 0x26001700, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_RF_CURRENT, 2, 0x00002660, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_VIDEO_AGC_CTRL, 2, 0x04000800, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_VID_AUD_OVERRIDE, 2, 0x27000100, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AV_SEP_CTRL, 2, 0x01296e1f, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_COMP_FLT_CTRL, 2, 0x009f50c1, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_SRC_PHASE_INC, 2, 0x1befbf06, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_SRC_GAIN_CONTROL, 2, 0x000035e8, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_CTRL_IF, 2, 0xC2262600, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_CTRL_INT, 2, 0xC2262600, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_AGC_CTRL_RF, 2, 0xC2262600, 4);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |= 0x3a003F10;
}
/* The AGC values should be the same for all standards,
AUD_SRC_SEL[19] should always be disabled */
dif_misc_ctrl_value &= ~FLD_DIF_AUD_SRC_SEL;
/* It is still possible to get Set Standard calls even when we are in FM mode
This is done to override the value for FM. */
if (dev->active_mode == V4L2_TUNER_RADIO)
dif_misc_ctrl_value = 0x7a080000;
/* Write the calculated value for misc ontrol register */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DIF_MISC_CTRL, 2, dif_misc_ctrl_value, 4);
return status;
}
int cx231xx_tuner_pre_channel_change(struct cx231xx *dev)
{
int status = 0;
u32 dwval;
/* Set the RF and IF k_agc values to 3 */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, &dwval, 4);
dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF);
dwval |= 0x33000000;
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, dwval, 4);
return status;
}
int cx231xx_tuner_post_channel_change(struct cx231xx *dev)
{
int status = 0;
u32 dwval;
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for SECAM */
status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, &dwval, 4);
dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF);
if(dev->norm & ( V4L2_STD_SECAM_L | V4L2_STD_SECAM_B | V4L2_STD_SECAM_D) ) {
dwval |= 0x88000000;
} else {
dwval |= 0x44000000;
}
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, dwval, 4);
return status;
}
/*************************************************************************************
* F L A T I R O N - B L O C K C O N T R O L functions *
*************************************************************************************/
int cx231xx_flatiron_initialize(struct cx231xx *dev)
{
int status = 0;
u32 value;
status = cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS, CH_PWR_CTRL1, 1, &value, 1);
/* enables clock to delta-sigma and decimation filter */
value |= 0x80;
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL1, 1, value, 1);
/* power up all channel */
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL2, 1, 0x00, 1);
return status;
}
int cx231xx_flatiron_update_power_control(struct cx231xx *dev, AV_MODE avmode)
{
int status = 0;
u32 value=0;
if(avmode!=POLARIS_AVMODE_ENXTERNAL_AV) {
status = cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS, CH_PWR_CTRL2, 1, &value, 1);
value |= 0xfe;
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL2, 1, value, 1);
}
else {
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL2, 1, 0x00, 1);
}
return status;
}
/* set flatiron for audio input types */
int cx231xx_flatiron_set_audio_input(struct cx231xx *dev, u8 audio_input)
{
int status = 0;
switch(audio_input) {
case CX231XX_AMUX_LINE_IN:
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL2, 1, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL1, 1, 0x80, 1);
break;
case CX231XX_AMUX_VIDEO:
default:
break;
}
dev->ctl_ainput = audio_input;
return status;
}
/*************************************************************************************
* P O W E R C O N T R O L functions *
*************************************************************************************/
int cx231xx_set_power_mode(struct cx231xx *dev, AV_MODE mode)
{
u8 value[4] ={0,0,0,0};
u32 tmp = 0;
int status = 0;
if(dev->power_mode != mode)
dev->power_mode = mode;
else {
cx231xx_info(" setPowerMode::mode = %d, No Change req.\n",mode);
return 0;
}
cx231xx_info(" setPowerMode::mode = %d\n",mode);
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
if(status < 0)
return status;
tmp = *((u32 *)value);
switch(mode) {
case POLARIS_AVMODE_ENXTERNAL_AV:
tmp &= (~PWR_MODE_MASK);
tmp |= PWR_AV_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
tmp |= PWR_ISO_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
tmp |=POLARIS_AVMODE_ENXTERNAL_AV;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
dev->xc_fw_load_done = 0; /* reset state of xceive tuner */
break;
case POLARIS_AVMODE_ANALOGT_TV:
tmp &= (~PWR_DEMOD_EN);
tmp |= (I2C_DEMOD_EN);
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
if(!(tmp & PWR_TUNER_EN)) {
tmp |= (PWR_TUNER_EN);
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if(!(tmp & PWR_AV_EN)) {
tmp |= PWR_AV_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if(!(tmp & PWR_ISO_EN )) {
tmp |= PWR_ISO_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if(!(tmp & POLARIS_AVMODE_ANALOGT_TV )) {
tmp |= POLARIS_AVMODE_ANALOGT_TV;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if( (dev->model == CX231XX_BOARD_CNXT_RDE_250) ||
(dev->model == CX231XX_BOARD_CNXT_RDU_250)) {
/* tuner path to channel 1 from port 3 */
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
if(dev->cx231xx_reset_analog_tuner)
dev->cx231xx_reset_analog_tuner(dev);
}
break;
case POLARIS_AVMODE_DIGITAL:
if(!(tmp & PWR_TUNER_EN)) {
tmp |= (PWR_TUNER_EN);
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if(!(tmp & PWR_AV_EN)) {
tmp |= PWR_AV_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if(!(tmp & PWR_ISO_EN)) {
tmp |= PWR_ISO_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
tmp |= POLARIS_AVMODE_DIGITAL|I2C_DEMOD_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
if(!(tmp & PWR_DEMOD_EN)) {
tmp |= PWR_DEMOD_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
if( (dev->model == CX231XX_BOARD_CNXT_RDE_250) ||
(dev->model == CX231XX_BOARD_CNXT_RDU_250)) {
/* tuner path to channel 1 from port 3 */
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
if(dev->cx231xx_reset_analog_tuner)
dev->cx231xx_reset_analog_tuner(dev);
}
break;
default:
break;
}
msleep(PWR_SLEEP_INTERVAL);
/* For power saving, only enable Pwr_resetout_n when digital TV is selected. */
if(mode == POLARIS_AVMODE_DIGITAL) {
tmp |= PWR_RESETOUT_EN;
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
msleep(PWR_SLEEP_INTERVAL);
}
/* update power control for colibri */
status = cx231xx_colibri_update_power_control(dev, mode);
/* update power control for flatiron */
status = cx231xx_flatiron_update_power_control(dev, mode);
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
cx231xx_info(" The data of PWR_CTL_EN register 0x74=0x%0x,0x%0x,0x%0x,0x%0x\n",value[0],value[1],value[2],value[3]);
return status;
}
int cx231xx_power_suspend(struct cx231xx *dev)
{
u8 value[4] ={0,0,0,0};
u32 tmp = 0;
int status = 0;
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
if(status > 0)
return status;
tmp = *((u32 *)value);
tmp &= (~PWR_MODE_MASK);
value[0]=(u8)tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, PWR_CTL_EN,value,4);
return status;
}
/*************************************************************************************
* S T R E A M C O N T R O L functions *
*************************************************************************************/
int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask)
{
u8 value[4] = {0x0, 0x0, 0x0, 0x0};
u32 tmp =0;
int status = 0;
cx231xx_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask);
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, EP_MODE_SET,value,4);
if(status < 0)
return status;
tmp = *((u32 *)value);
tmp |= ep_mask;
value[0]=(u8) tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, EP_MODE_SET,value,4);
return status;
}
int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask)
{
u8 value[4] = {0x0, 0x0, 0x0, 0x0};
u32 tmp =0;
int status = 0;
cx231xx_info("cx231xx_stop_stream():: ep_mask = %x\n", ep_mask);
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, EP_MODE_SET,value,4);
if(status < 0)
return status;
tmp = *((u32 *)value);
tmp&= (~ep_mask);
value[0]=(u8) tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, EP_MODE_SET,value,4);
return status;
}
int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
{
int status = 0;
if(dev->udev->speed == USB_SPEED_HIGH)
{
switch(media_type)
{
case 81: /* audio */
cx231xx_info("%s: Audio enter HANC\n",__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
break;
case 2: /* vbi */
cx231xx_info("%s: set vanc registers\n",__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
break;
case 3: /* sliced cc */
cx231xx_info("%s: set hanc registers\n",__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
break;
case 0: /* video */
cx231xx_info("%s: set video registers\n",__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
break;
case 4: /* ts1 */
cx231xx_info("%s: set ts1 registers\n",__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
break;
case 6: /* ts1 parallel mode */
cx231xx_info("%s: set ts1 parrallel mode registers\n",__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
break;
}
}
else
{
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101);
}
return status;
}
int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type)
{
int rc;
u32 ep_mask = -1;
PPCB_CONFIG pcb_config;
/* get EP for media type */
pcb_config = &dev->current_pcb_config;
if(pcb_config->config_num==1)
{
switch (media_type)
{
case 0: /* Video */
ep_mask =ENABLE_EP4; /* ep4 [00:1000] */
break;
case 1: /* Audio */
ep_mask =ENABLE_EP3; /* ep3 [00:0100] */
break;
case 2: /* Vbi */
ep_mask = ENABLE_EP5; /* ep5 [01:0000] */
break;
case 3: /* Sliced_cc */
ep_mask = ENABLE_EP6; /* ep6 [10:0000] */
break;
case 4: /* ts1 */
case 6: /* ts1 parallel mode */
ep_mask = ENABLE_EP1; /* ep1 [00:0001] */
break;
case 5: /* ts2 */
ep_mask = ENABLE_EP2; /* ep2 [00:0010] */
break;
}
}
else if(pcb_config->config_num>1)
{
switch (media_type)
{
case 0: /* Video */
ep_mask = ENABLE_EP4; /* ep4 [00:1000] */
break;
case 1: /* Audio */
ep_mask = ENABLE_EP3; /* ep3 [00:0100] */
break;
case 2: /* Vbi */
ep_mask = ENABLE_EP5; /* ep5 [01:0000] */
break;
case 3: /* Sliced_cc */
ep_mask = ENABLE_EP6; /* ep6 [10:0000] */
break;
case 4: /* ts1 */
case 6: /* ts1 parallel mode */
ep_mask = ENABLE_EP1; /* ep1 [00:0001] */
break;
case 5: /* ts2 */
ep_mask = ENABLE_EP2; /* ep2 [00:0010] */
break;
}
}
if(start) {
rc = cx231xx_initialize_stream_xfer(dev, media_type);
if(rc < 0) {
return rc;
}
/* enable video capture */
if(ep_mask > 0 )
rc = cx231xx_start_stream(dev, ep_mask);
}
else {
/* disable video capture */
if(ep_mask > 0 )
rc = cx231xx_stop_stream(dev, ep_mask);
}
if (dev->mode == CX231XX_ANALOG_MODE){
/* do any in Analog mode */
}
else {
/* do any in digital mode */
}
return rc;
}
EXPORT_SYMBOL_GPL(cx231xx_capture_start);
/************************************************************************************
* G P I O B I T control functions *
*************************************************************************************/
int cx231xx_set_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8* gpio_val)
{
int status = 0;
status = cx231xx_send_gpio_cmd(dev, gpio_bit, gpio_val, 4, 0, 0);
return status;
}
int cx231xx_get_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8* gpio_val)
{
int status = 0;
status = cx231xx_send_gpio_cmd(dev, gpio_bit, gpio_val, 4, 0, 1);
return status;
}
/*
* cx231xx_set_gpio_direction
* Sets the direction of the GPIO pin to input or output
*
* Parameters :
* pin_number : The GPIO Pin number to program the direction for
* from 0 to 31
* pin_value : The Direction of the GPIO Pin under reference.
* 0 = Input direction
* 1 = Output direction
*/
int cx231xx_set_gpio_direction(struct cx231xx *dev,
int pin_number,
int pin_value)
{
int status = 0;
u32 value = 0;
/* Check for valid pin_number - if 32 , bail out */
if (pin_number >= 32) {
return -EINVAL;
}
if (pin_value == 0) { /* input */
value = dev->gpio_dir &(~(1<<pin_number)) ; /* clear */
} else {
value = dev->gpio_dir | (1<<pin_number) ;
}
status = cx231xx_set_gpio_bit(dev, value, (u8*) & dev->gpio_val);
/* cache the value for future */
dev->gpio_dir = value;
return status;
}
/*
* SetGpioPinLogicValue
* Sets the value of the GPIO pin to Logic high or low. The Pin under
* reference should ALREADY BE SET IN OUTPUT MODE !!!!!!!!!
*
* Parameters :
* pin_number : The GPIO Pin number to program the direction for
* pin_value : The value of the GPIO Pin under reference.
* 0 = set it to 0
* 1 = set it to 1
*/
int cx231xx_set_gpio_value(struct cx231xx *dev,
int pin_number,
int pin_value)
{
int status = 0;
u32 value = 0;
/* Check for valid pin_number - if 0xFF , bail out */
if (pin_number >= 32)
return -EINVAL;
/* first do a sanity check - if the Pin is not output, make it output */
if ((dev->gpio_dir & (1<<pin_number)) == 0x00)
{
/* It was in input mode */
value = dev->gpio_dir | (1<<pin_number) ;
dev->gpio_dir = value;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
value = 0;
}
if (pin_value == 0) {
value = dev->gpio_val & (~(1<<pin_number));
} else {
value = dev->gpio_val | (1<<pin_number);
}
/* store the value */
dev->gpio_val=value;
/* toggle bit0 of GP_IO */
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
return status;
}
/************************************************************************************
* G P I O I2C related functions *
*************************************************************************************/
int cx231xx_gpio_i2c_start(struct cx231xx *dev)
{
int status = 0;
/* set SCL to output 1 ; set SDA to output 1 */
dev->gpio_dir |= 1<< dev->board.tuner_scl_gpio;
dev->gpio_dir |= 1<<dev->board.tuner_sda_gpio;
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
dev->gpio_val |= 1<<dev->board.tuner_sda_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if(status < 0){
return -EINVAL;
}
/* set SCL to output 1; set SDA to output 0 */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
dev->gpio_val &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if(status < 0){
return -EINVAL;
}
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if(status < 0){
return -EINVAL;
}
return status;
}
int cx231xx_gpio_i2c_end(struct cx231xx *dev)
{
int status = 0;
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_dir |= 1<<dev->board.tuner_scl_gpio;
dev->gpio_dir |= 1<<dev->board.tuner_sda_gpio;
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if(status < 0){
return -EINVAL;
}
/* set SCL to output 1; set SDA to output 0 */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
dev->gpio_val &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if(status < 0){
return -EINVAL;
}
/* set SCL to input ,release SCL cable control
set SDA to input ,release SDA cable control */
dev->gpio_dir &= ~(1<<dev->board.tuner_scl_gpio);
dev->gpio_dir &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if(status < 0){
return -EINVAL;
}
return status;
}
int cx231xx_gpio_i2c_write_byte(struct cx231xx *dev, u8 data)
{
int status = 0;
u8 i;
/* set SCL to output ; set SDA to output */
dev->gpio_dir |= 1<<dev->board.tuner_scl_gpio;
dev->gpio_dir |= 1<<dev->board.tuner_sda_gpio;
for(i = 0;i<8;i++) {
if(((data<<i) & 0x80) == 0) {
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL to output 1; set SDA to output 0 */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
} else {
/* set SCL to output 0; set SDA to output 1 */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
dev->gpio_val |= 1<<dev->board.tuner_sda_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL to output 1; set SDA to output 1 */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL to output 0; set SDA to output 1 */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
}
}
return status;
}
int cx231xx_gpio_i2c_read_byte(struct cx231xx *dev, u8 *buf)
{
u8 value = 0;
int status = 0;
u32 gpio_logic_value =0;
u8 i;
/* read byte */
for(i=0;i<8;i++) { /* send write I2c addr */
/* set SCL to output 0; set SDA to input */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL to output 1; set SDA to input */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* get SDA data bit */
gpio_logic_value = dev->gpio_val;
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if((dev->gpio_val & (1<<dev->board.tuner_sda_gpio)) != 0) {
value |= (1<<(8-i-1));
}
dev->gpio_val = gpio_logic_value;
}
/* set SCL to output 0,finish the read latest SCL signal.
!!!set SDA to input,never to modify SDA direction at the same times */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* store the value */
*buf = value & 0xff;
return status;
}
int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev)
{
int status = 0;
u32 gpio_logic_value = 0;
int nCnt=10;
int nInit=nCnt;
/* clock stretch; set SCL to input; set SDA to input; get SCL value till SCL = 1 */
dev->gpio_dir &= ~(1<<dev->board.tuner_sda_gpio);
dev->gpio_dir &= ~(1<<dev->board.tuner_scl_gpio);
gpio_logic_value = dev->gpio_val;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
do{
msleep(2);
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
nCnt--;
}while(((dev->gpio_val & (1<<dev->board.tuner_scl_gpio)) == 0) && (nCnt>0));
if(nCnt==0) {
cx231xx_info("No ACK after %d msec for clock stretch. GPIO I2C operation failed!",nInit*10);
}
/* readAck
throuth clock stretch ,slave has given a SCL signal,so the SDA data can be directly read. */
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
if((dev->gpio_val & 1<< dev->board.tuner_sda_gpio) == 0){
dev->gpio_val = gpio_logic_value;
dev->gpio_val &= ~(1<< dev->board.tuner_sda_gpio);
status = 0;
} else {
dev->gpio_val = gpio_logic_value;
dev->gpio_val |= (1<< dev->board.tuner_sda_gpio);
}
/* read SDA end, set the SCL to output 0, after this operation, SDA direction can be changed. */
dev->gpio_val = gpio_logic_value;
dev->gpio_dir |= (1<<dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
return status;
}
int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev)
{
int status = 0;
/* set SDA to ouput */
dev->gpio_dir |= 1<<dev->board.tuner_sda_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL = 0 (output); set SDA = 0 (output) */
dev->gpio_val &= ~(1<<dev->board.tuner_sda_gpio);
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL = 1 (output); set SDA = 0 (output) */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SCL = 0 (output); set SDA = 0 (output) */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set SDA to input,and then the slave will read data from SDA. */
dev->gpio_dir &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
return status;
}
int cx231xx_gpio_i2c_write_nak(struct cx231xx *dev)
{
int status = 0;
/* set scl to output ; set sda to input */
dev->gpio_dir |= 1<<dev->board.tuner_scl_gpio;
dev->gpio_dir &= ~(1<<dev->board.tuner_sda_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set scl to output 0; set sda to input */
dev->gpio_val &= ~(1<<dev->board.tuner_scl_gpio);
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
/* set scl to output 1; set sda to input */
dev->gpio_val |= 1<<dev->board.tuner_scl_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8*) &dev->gpio_val);
return status;
}
/************************************************************************************
* G P I O I2C related functions *
*************************************************************************************/
/* cx231xx_gpio_i2c_read
* Function to read data from gpio based I2C interface
*/
int cx231xx_gpio_i2c_read(struct cx231xx *dev, u8 dev_addr, u8 *buf ,u8 len)
{
int status = 0;
int i = 0;
/* get the lock */
mutex_lock(&dev->gpio_i2c_lock);
/* start */
status = cx231xx_gpio_i2c_start(dev);
/* write dev_addr */
status = cx231xx_gpio_i2c_write_byte(dev, (dev_addr << 1) +1);
/* readAck */
status = cx231xx_gpio_i2c_read_ack(dev);
/* read data */
for(i = 0; i < len; i++ ) {
/* read data */
buf[i] = 0;
status = cx231xx_gpio_i2c_read_byte(dev, & buf[i]);
if( (i+1) != len) {
/* only do write ack if we more length */
status = cx231xx_gpio_i2c_write_ack(dev);
}
}
/* write NAK - inform reads are complete */
status = cx231xx_gpio_i2c_write_nak(dev);
/* write end */
status = cx231xx_gpio_i2c_end(dev);
/* release the lock */
mutex_unlock(&dev->gpio_i2c_lock);
return status;
}
/* cx231xx_gpio_i2c_write
* Function to write data to gpio based I2C interface
*/
int cx231xx_gpio_i2c_write(struct cx231xx *dev, u8 dev_addr, u8 *buf ,u8 len)
{
int status = 0;
int i=0;
/* get the lock */
mutex_lock(&dev->gpio_i2c_lock);
/* start */
status = cx231xx_gpio_i2c_start(dev);
/* write dev_addr */
status = cx231xx_gpio_i2c_write_byte(dev, dev_addr << 1);
/* read Ack */
status = cx231xx_gpio_i2c_read_ack(dev);
for(i = 0; i < len; i++ ) {
/* Write data */
status = cx231xx_gpio_i2c_write_byte(dev, buf[i]);
/* read Ack */
status = cx231xx_gpio_i2c_read_ack(dev);
}
/* write End */
status = cx231xx_gpio_i2c_end(dev);
/* release the lock */
mutex_unlock(&dev->gpio_i2c_lock);
return 0;
}
/*
cx231xx-cards.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/usb.h>
#include <media/tuner.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include <media/cx25840.h>
#include "xc5000.h"
#include "cx231xx.h"
static int tuner = -1;
module_param(tuner, int, 0444);
MODULE_PARM_DESC(tuner, "tuner type");
static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
/* Bitmask marking allocated devices from 0 to CX231XX_MAXBOARDS */
static unsigned long cx231xx_devused;
/*
* Reset sequences for analog/digital modes
*/
static struct cx231xx_reg_seq RDE250_XCV_TUNER[] = {
{ 0x03, 0x01, 10 },
{ 0x03, 0x00, 30 },
{ 0x03, 0x01, 10 },
{ -1, -1, -1 },
};
/*
* Board definitions
*/
struct cx231xx_board cx231xx_boards[] = {
[CX231XX_BOARD_UNKNOWN] = {
.name = "Unknown CX231xx video grabber",
.tuner_type = TUNER_ABSENT,
.input = { {
.type = CX231XX_VMUX_TELEVISION,
.vmux = CX231XX_VIN_3_1,
.amux = CX231XX_AMUX_VIDEO,
.gpio = 0,
}, {
.type = CX231XX_VMUX_COMPOSITE1,
.vmux = CX231XX_VIN_2_1,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = 0,
}, {
.type = CX231XX_VMUX_SVIDEO,
.vmux = CX231XX_VIN_1_1 | (CX231XX_VIN_1_2 << 8 ) |
CX25840_SVIDEO_ON,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = 0,
} },
},
[CX231XX_BOARD_CNXT_RDE_250] = {
.name = "Conexant Hybrid TV - RDE250",
.valid = CX231XX_BOARD_VALIDATED,
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_gpio = RDE250_XCV_TUNER,
.tuner_sif_gpio = 0x05,
.tuner_scl_gpio = 0x1a,
.tuner_sda_gpio = 0x1b,
.decoder = CX231XX_AVDECODER,
.demod_xfer_mode = 0,
.ctl_pin_status_mask = 0xFFFFFFC4,
.agc_analog_digital_select_gpio = 0x0c,
.gpio_pin_status_mask = 0x4001000,
.tuner_i2c_master = 1,
.demod_i2c_master = 2,
.has_dvb = 1,
.demod_addr = 0x02,
.norm = V4L2_STD_PAL,
.input = { {
.type = CX231XX_VMUX_TELEVISION,
.vmux = CX231XX_VIN_3_1,
.amux = CX231XX_AMUX_VIDEO,
.gpio = 0,
}, {
.type = CX231XX_VMUX_COMPOSITE1,
.vmux = CX231XX_VIN_2_1,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = 0,
}, {
.type = CX231XX_VMUX_SVIDEO,
.vmux = CX231XX_VIN_1_1 | (CX231XX_VIN_1_2 << 8 ) |
CX25840_SVIDEO_ON,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = 0,
} },
},
[CX231XX_BOARD_CNXT_RDU_250] = {
.name = "Conexant Hybrid TV - RDU250",
.valid = CX231XX_BOARD_VALIDATED,
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.tuner_gpio = RDE250_XCV_TUNER,
.tuner_sif_gpio = 0x05,
.tuner_scl_gpio = 0x1a,
.tuner_sda_gpio = 0x1b,
.decoder = CX231XX_AVDECODER,
.demod_xfer_mode = 0,
.ctl_pin_status_mask = 0xFFFFFFC4,
.agc_analog_digital_select_gpio = 0x0c,
.gpio_pin_status_mask = 0x4001000,
.tuner_i2c_master = 1,
.demod_i2c_master = 2,
.has_dvb = 1,
.demod_addr = 0x32,
.norm = V4L2_STD_NTSC,
.input = { {
.type = CX231XX_VMUX_TELEVISION,
.vmux = CX231XX_VIN_3_1,
.amux = CX231XX_AMUX_VIDEO,
.gpio = 0,
}, {
.type = CX231XX_VMUX_COMPOSITE1,
.vmux = CX231XX_VIN_2_1,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = 0,
}, {
.type = CX231XX_VMUX_SVIDEO,
.vmux = CX231XX_VIN_1_1 | (CX231XX_VIN_1_2 << 8 ) |
CX25840_SVIDEO_ON,
.amux = CX231XX_AMUX_LINE_IN,
.gpio = 0,
} },
},
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
/* table of devices that work with this driver */
struct usb_device_id cx231xx_id_table [] = {
{ USB_DEVICE(0x0572, 0x58A0),
.driver_info = CX231XX_BOARD_UNKNOWN },
{ USB_DEVICE(0x0572, 0x58A2),
.driver_info = CX231XX_BOARD_CNXT_RDE_250 },
{ USB_DEVICE(0x0572, 0x5A3C),
.driver_info = CX231XX_BOARD_CNXT_RDU_250 },
{ },
};
MODULE_DEVICE_TABLE(usb, cx231xx_id_table);
/* cx231xx_tuner_callback
* will be used to reset XC5000 tuner using GPIO pin
*/
int cx231xx_tuner_callback(void *ptr, int component, int command, int arg)
{
int rc = 0;
struct cx231xx *dev = ptr;
if (dev->tuner_type == TUNER_XC5000) {
if (command == XC5000_TUNER_RESET) {
cx231xx_info("Tuner Call back : RESET : command %d : tuner type %d \n",
command, dev->tuner_type);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,1);
msleep(10);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,0);
msleep(330);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,1);
msleep(10);
}
}
return rc;
}
EXPORT_SYMBOL_GPL(cx231xx_tuner_callback);
static void inline cx231xx_set_model(struct cx231xx *dev)
{
memcpy(&dev->board, &cx231xx_boards[dev->model], sizeof(dev->board));
}
/* Since cx231xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
void cx231xx_pre_card_setup(struct cx231xx *dev)
{
cx231xx_set_model(dev);
cx231xx_info("Identified as %s (card=%d)\n",
dev->board.name, dev->model);
/* Do card specific if any */
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
/* do card specific GPIO settings if required */
cx231xx_info("Precard: Board is Conexnat RDE 250\n");
/* set the direction for GPIO pins */
cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit,1);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,1);
cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio,1);
break;
case CX231XX_BOARD_CNXT_RDU_250:
/* do card specific GPIO settings if required */
cx231xx_info("Precard: Board is Conexnat RDU 250\n");
/* set the direction for GPIO pins */
cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit,1);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,1);
cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio,1);
break;
}
/* request some modules if any required */
/* reset the Tuner */
cx231xx_gpio_set(dev, dev->board.tuner_gpio);
/* set the mode to Analog mode initially */
cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
/* Unlock device */
/* cx231xx_set_mode(dev, CX231XX_SUSPEND); */
}
#if 0
static void cx231xx_config_tuner(struct cx231xx *dev)
{
struct tuner_setup tun_setup;
struct v4l2_frequency f;
if (dev->tuner_type == TUNER_ABSENT)
return;
tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
tun_setup.tuner_callback = cx231xx_tuner_callback;
cx231xx_i2c_call_clients(&dev->i2c_bus[1], TUNER_SET_TYPE_ADDR, &tun_setup);
#if 0
if (tun_setup.type == TUNER_XC5000) {
static struct xc2028_ctrl ctrl = {
.fname = XC5000_DEFAULT_FIRMWARE,
.max_len = 64,
.demod = 0;
};
struct v4l2_priv_tun_config cfg = {
.tuner = dev->tuner_type,
.priv = &ctrl,
};
cx231xx_i2c_call_clients(&dev->i2c_bus[1], TUNER_SET_CONFIG, &cfg);
}
#endif
/* configure tuner */
f.tuner = 0;
f.type = V4L2_TUNER_ANALOG_TV;
f.frequency = 9076; /* just a magic number */
dev->ctl_freq = f.frequency;
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, &f);
}
#endif
/* ----------------------------------------------------------------------- */
void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir)
{
if (disable_ir) {
ir->get_key = NULL;
return ;
}
/* detect & configure */
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
break;
case CX231XX_BOARD_CNXT_RDU_250:
break;
default:
break;
}
}
void cx231xx_card_setup(struct cx231xx *dev)
{
cx231xx_set_model(dev);
dev->tuner_type = cx231xx_boards[dev->model].tuner_type;
if (cx231xx_boards[dev->model].tuner_addr)
dev->tuner_addr = cx231xx_boards[dev->model].tuner_addr;
cx231xx_info(": tuner type %d, tuner address %d \n",
dev->tuner_type, dev->tuner_addr);
/* Do card specific if any */
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
/* do card specific GPIO settings if required */
cx231xx_info("Board is Conexnat RDE 250\n");
break;
case CX231XX_BOARD_CNXT_RDU_250:
/* do card specific GPIO settings if required */
cx231xx_info("Board is Conexnat RDU 250\n");
break;
}
if (dev->board.valid == CX231XX_BOARD_NOT_VALIDATED) {
cx231xx_errdev("\n\n");
cx231xx_errdev("The support for this board weren't "
"valid yet.\n");
cx231xx_errdev("Please send a report of having this working\n");
cx231xx_errdev("not to V4L mailing list (and/or to other "
"addresses)\n\n");
}
/* request some modules */
if (dev->board.decoder == CX231XX_AVDECODER) {
cx231xx_info(": Requesting cx25840 module\n");
request_module("cx25840");
}
#if 0
if (dev->board.tuner_type != TUNER_ABSENT) {
cx231xx_info(": Requesting Tuner module\n");
request_module("tuner");
}
cx231xx_config_tuner(dev);
/* TBD IR will be added later */
cx231xx_ir_init(dev);
#endif
}
/*
* cx231xx_config()
* inits registers with sane defaults
*/
int cx231xx_config(struct cx231xx *dev)
{
/* TBD need to add cx231xx specific code */
dev->mute = 1; /* maybe not the right place... */
dev->volume = 0x1f;
return 0;
}
/*
* cx231xx_config_i2c()
* configure i2c attached devices
*/
void cx231xx_config_i2c(struct cx231xx *dev)
{
struct v4l2_routing route;
route.input = INPUT(dev->video_input)->vmux;
route.output = 0;
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_STREAMON, NULL);
}
/*
* cx231xx_realease_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconected or at module unload
*/
void cx231xx_release_resources(struct cx231xx *dev)
{
#if 0 /* TBD IR related */
if (dev->ir)
cx231xx_ir_fini(dev);
#endif
cx231xx_release_analog_resources(dev);
cx231xx_remove_from_devlist(dev);
cx231xx_dev_uninit(dev);
usb_put_dev(dev->udev);
/* Mark device as unused */
cx231xx_devused &= ~(1<<dev->devno);
}
/*
* cx231xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
*/
static int cx231xx_init_dev(struct cx231xx **devhandle, struct usb_device *udev,
int minor)
{
struct cx231xx *dev = *devhandle;
int retval = -ENOMEM;
int errCode;
unsigned int maxh, maxw;
dev->udev = udev;
mutex_init(&dev->lock);
mutex_init(&dev->ctrl_urb_lock);
mutex_init(&dev->gpio_i2c_lock);
spin_lock_init(&dev->video_mode.slock);
spin_lock_init(&dev->vbi_mode.slock);
spin_lock_init(&dev->sliced_cc_mode.slock);
init_waitqueue_head(&dev->open);
init_waitqueue_head(&dev->wait_frame);
init_waitqueue_head(&dev->wait_stream);
dev->cx231xx_read_ctrl_reg = cx231xx_read_ctrl_reg;
dev->cx231xx_write_ctrl_reg = cx231xx_write_ctrl_reg;
dev->cx231xx_send_usb_command = cx231xx_send_usb_command;
dev->cx231xx_gpio_i2c_read = cx231xx_gpio_i2c_read;
dev->cx231xx_gpio_i2c_write = cx231xx_gpio_i2c_write;
/* Query cx231xx to find what pcb config it is related to */
initialize_cx231xx(dev);
/* Cx231xx pre card setup */
cx231xx_pre_card_setup(dev);
errCode = cx231xx_config(dev);
if (errCode) {
cx231xx_errdev("error configuring device\n");
return -ENOMEM;
}
/* set default norm */
dev->norm = dev->board.norm;
/* register i2c bus */
errCode = cx231xx_dev_init(dev);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_i2c_register - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* Do board specific init */
cx231xx_card_setup(dev);
/* configure the device */
cx231xx_config_i2c(dev);
maxw = norm_maxw(dev);
maxh = norm_maxh(dev);
/* set default image size */
dev->width = maxw;
dev->height = maxh;
dev->interlaced = 0;
dev->hscale = 0;
dev->vscale = 0;
dev->video_input = 0;
errCode = cx231xx_config(dev);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_config - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* init video dma queues */
INIT_LIST_HEAD(&dev->video_mode.vidq.active);
INIT_LIST_HEAD(&dev->video_mode.vidq.queued);
/* init vbi dma queues */
INIT_LIST_HEAD(&dev->vbi_mode.vidq.active);
INIT_LIST_HEAD(&dev->vbi_mode.vidq.queued);
/* Reset other chips required if they are tied up with GPIO pins */
cx231xx_add_into_devlist(dev);
retval = cx231xx_register_analog_devices(dev);
if (retval < 0) {
cx231xx_release_resources(dev);
goto fail_reg_devices;
}
cx231xx_init_extension(dev);
return 0;
fail_reg_devices:
mutex_unlock(&dev->lock);
return retval;
}
#if defined(CONFIG_MODULES) && defined(MODULE)
static void request_module_async(struct work_struct *work)
{
struct cx231xx *dev = container_of(work,
struct cx231xx, request_module_wk);
if (dev->has_alsa_audio)
request_module("cx231xx-alsa");
if (dev->board.has_dvb)
request_module("cx231xx-dvb");
}
static void request_modules(struct cx231xx *dev)
{
INIT_WORK(&dev->request_module_wk, request_module_async);
schedule_work(&dev->request_module_wk);
}
#else
#define request_modules(dev)
#endif /* CONFIG_MODULES */
/*
* cx231xx_usb_probe()
* checks for supported devices
*/
static int cx231xx_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_device *udev;
struct usb_interface *uif;
struct cx231xx *dev = NULL;
int retval = -ENODEV;
int nr, ifnum;
int i, isoc_pipe = 0;
char *speed;
char descr[255] = "";
struct usb_interface *lif = NULL;
int skip_interface = 0;
struct usb_interface_assoc_descriptor *assoc_desc;
udev = usb_get_dev(interface_to_usbdev(interface));
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
cx231xx_info(": Interface Number %d\n", ifnum);
/* Interface number 0 - IR interface */
if(ifnum == 0 ){
/* Check to see next free device and mark as used */
nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS);
cx231xx_devused |= 1<<nr;
if (nr >= CX231XX_MAXBOARDS) {
cx231xx_info(": Supports only %i cx231xx boards.\n",
CX231XX_MAXBOARDS);
cx231xx_devused &= ~(1<<nr);
return -ENOMEM;
}
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
cx231xx_err(DRIVER_NAME ": out of memory!\n");
cx231xx_devused &= ~(1<<nr);
return -ENOMEM;
}
snprintf(dev->name, 29, "cx231xx #%d", nr);
dev->devno = nr;
dev->model = id->driver_info;
dev->video_mode.alt = -1;
dev->interface_count++;
/* reset gpio dir and value */
dev->gpio_dir = 0;
dev->gpio_val = 0;
dev->xc_fw_load_done = 0;
dev->has_alsa_audio = 1;
dev->power_mode = -1;
dev->vbi_or_sliced_cc_mode = 0; /* 0 - vbi ; 1 -sliced cc mode */
/* get maximum no.of IAD interfaces */
assoc_desc = udev->actconfig->intf_assoc[0];
dev->max_iad_interface_count = assoc_desc->bInterfaceCount;
cx231xx_info(": Found IAD interface count %d\n", dev->max_iad_interface_count);
/* init CIR module TBD */
/* store the current interface */
lif = interface;
}
else if(ifnum == 1 ){
/* Get dev structure first */
dev = usb_get_intfdata(udev->actconfig->interface[0]);
if(dev == NULL){
cx231xx_err(DRIVER_NAME ": out of first interface!\n");
return -ENODEV;
}
/* store the interface 0 back */
lif = udev->actconfig->interface[0];
/* increment interface count */
dev->interface_count++;
/* get device number */
nr = dev->devno;
assoc_desc = udev->actconfig->intf_assoc[0];
if(assoc_desc->bFirstInterface == ifnum){
cx231xx_info(": Found IAD interface match: AV Descriptor Start!! \n");
} else {
cx231xx_err(DRIVER_NAME " Not found matching interface\n");
return -ENODEV;
}
}
else if(ifnum >= 2) {
/* Get dev structure first */
dev = usb_get_intfdata(udev->actconfig->interface[0]);
if(dev == NULL){
cx231xx_err(DRIVER_NAME ": out of first interface!\n");
return -ENODEV;
}
/* store the interface 0 back */
lif = udev->actconfig->interface[0];
/* increment interface count */
dev->interface_count++;
/* get device number */
nr = dev->devno;
/* set skip interface */
if((dev->interface_count -1) != dev->max_iad_interface_count )
skip_interface = 1; /* set skipping */
else{
cx231xx_info(": Found IAD interface number match with AV Device number!! \n");
}
}
switch (udev->speed) {
case USB_SPEED_LOW:
speed = "1.5";
break;
case USB_SPEED_UNKNOWN:
case USB_SPEED_FULL:
speed = "12";
break;
case USB_SPEED_HIGH:
speed = "480";
break;
default:
speed = "unknown";
}
if (udev->manufacturer)
strlcpy(descr, udev->manufacturer, sizeof(descr));
if (udev->product) {
if (*descr)
strlcat(descr, " ", sizeof(descr));
strlcat(descr, udev->product, sizeof(descr));
}
if (*descr)
strlcat(descr, " ", sizeof(descr));
cx231xx_info("New device %s@ %s Mbps "
"(%04x:%04x, interface %d, class %d)\n",
descr,
speed,
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
ifnum,
interface->altsetting->desc.bInterfaceNumber);
/* AV device initialization */
if((dev->interface_count -1) == dev->max_iad_interface_count ) {
cx231xx_info(" Calling init_dev\n");
/* allocate device struct */
retval = cx231xx_init_dev(&dev, udev, nr);
if (retval) {
cx231xx_devused &= ~(1<<dev->devno);
kfree(dev);
return retval;
}
/* compute alternate max packet sizes for video */
uif = udev->actconfig->interface[dev->current_pcb_config.hs_config_info[0].interface_info.video_index+1];
dev->video_mode.end_point_addr = le16_to_cpu(uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress);
dev->video_mode.num_alt = uif->num_altsetting;
cx231xx_info(": EndPoint Addr 0x%x, Alternate settings: %i\n", dev->video_mode.end_point_addr,
dev->video_mode.num_alt);
dev->video_mode.alt_max_pkt_size = kmalloc(32 * dev->video_mode.num_alt, GFP_KERNEL);
if (dev->video_mode.alt_max_pkt_size == NULL) {
cx231xx_errdev("out of memory!\n");
cx231xx_devused &= ~(1<<nr);
kfree(dev);
return -ENOMEM;
}
for (i = 0; i < dev->video_mode.num_alt ; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
wMaxPacketSize);
dev->video_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
cx231xx_info("Alternate setting %i, max size= %i\n", i,
dev->video_mode.alt_max_pkt_size[i]);
}
/* compute alternate max packet sizes for vbi */
uif = udev->actconfig->interface[dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index+1];
dev->vbi_mode.end_point_addr =
le16_to_cpu(uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress);
dev->vbi_mode.num_alt = uif->num_altsetting;
cx231xx_info(": EndPoint Addr 0x%x, Alternate settings: %i\n", dev->vbi_mode.end_point_addr,
dev->vbi_mode.num_alt);
dev->vbi_mode.alt_max_pkt_size = kmalloc(32 * dev->vbi_mode.num_alt, GFP_KERNEL);
if (dev->vbi_mode.alt_max_pkt_size == NULL) {
cx231xx_errdev("out of memory!\n");
cx231xx_devused &= ~(1<<nr);
kfree(dev);
return -ENOMEM;
}
for (i = 0; i < dev->vbi_mode.num_alt ; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
wMaxPacketSize);
dev->vbi_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
cx231xx_info("Alternate setting %i, max size= %i\n", i,
dev->vbi_mode.alt_max_pkt_size[i]);
}
/* compute alternate max packet sizes for sliced CC */
uif = udev->actconfig->interface[dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index+1];
dev->sliced_cc_mode.end_point_addr =
le16_to_cpu(uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress);
dev->sliced_cc_mode.num_alt = uif->num_altsetting;
cx231xx_info(": EndPoint Addr 0x%x, Alternate settings: %i\n", dev->sliced_cc_mode.end_point_addr,
dev->sliced_cc_mode.num_alt);
dev->sliced_cc_mode.alt_max_pkt_size = kmalloc(32 * dev->sliced_cc_mode.num_alt, GFP_KERNEL);
if (dev->sliced_cc_mode.alt_max_pkt_size == NULL) {
cx231xx_errdev("out of memory!\n");
cx231xx_devused &= ~(1<<nr);
kfree(dev);
return -ENOMEM;
}
for (i = 0; i < dev->sliced_cc_mode.num_alt ; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
wMaxPacketSize);
dev->sliced_cc_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
cx231xx_info("Alternate setting %i, max size= %i\n", i,
dev->sliced_cc_mode.alt_max_pkt_size[i]);
}
if(dev->current_pcb_config.ts1_source != 0xff ) {
/* compute alternate max packet sizes for TS1 */
uif = udev->actconfig->interface[dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index+1];
dev->ts1_mode.end_point_addr =
le16_to_cpu(uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress);
dev->ts1_mode.num_alt = uif->num_altsetting;
cx231xx_info(": EndPoint Addr 0x%x, Alternate settings: %i\n", dev->ts1_mode.end_point_addr,
dev->ts1_mode.num_alt);
dev->ts1_mode.alt_max_pkt_size = kmalloc(32 * dev->ts1_mode.num_alt, GFP_KERNEL);
if (dev->ts1_mode.alt_max_pkt_size == NULL) {
cx231xx_errdev("out of memory!\n");
cx231xx_devused &= ~(1<<nr);
kfree(dev);
return -ENOMEM;
}
for (i = 0; i < dev->ts1_mode.num_alt ; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.
wMaxPacketSize);
dev->ts1_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
cx231xx_info("Alternate setting %i, max size= %i\n", i,
dev->ts1_mode.alt_max_pkt_size[i]);
}
}
}
/* save our data pointer in this interface device */
usb_set_intfdata(lif, dev);
/* load other modules required */
if((dev->interface_count -1) == dev->max_iad_interface_count )
{
cx231xx_info("Calling request modules\n");
request_modules(dev);
}
if(skip_interface ) {
cx231xx_info("Skipping the interface\n");
return -ENODEV;
}
return 0;
}
/*
* cx231xx_usb_disconnect()
* called when the device gets diconencted
* video device will be unregistered on v4l2_close in case it is still open
*/
static void cx231xx_usb_disconnect(struct usb_interface *interface)
{
struct cx231xx *dev;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (!dev)
return;
/* wait until all current v4l2 io is finished then deallocate
resources */
mutex_lock(&dev->lock);
wake_up_interruptible_all(&dev->open);
if (dev->users) {
cx231xx_warn
("device /dev/video%d is open! Deregistration and memory "
"deallocation are deferred on close.\n",
dev->vdev->num);
dev->state |= DEV_MISCONFIGURED;
cx231xx_uninit_isoc(dev);
dev->state |= DEV_DISCONNECTED;
wake_up_interruptible(&dev->wait_frame);
wake_up_interruptible(&dev->wait_stream);
} else {
dev->state |= DEV_DISCONNECTED;
cx231xx_release_resources(dev);
}
cx231xx_close_extension(dev);
mutex_unlock(&dev->lock);
if (!dev->users) {
kfree(dev->video_mode.alt_max_pkt_size);
kfree(dev->vbi_mode.alt_max_pkt_size);
kfree(dev->sliced_cc_mode.alt_max_pkt_size);
kfree(dev->ts1_mode.alt_max_pkt_size);
kfree(dev);
}
}
static struct usb_driver cx231xx_usb_driver = {
.name = "cx231xx",
.probe = cx231xx_usb_probe,
.disconnect = cx231xx_usb_disconnect,
.id_table = cx231xx_id_table,
};
static int __init cx231xx_module_init(void)
{
int result;
printk(KERN_INFO DRIVER_NAME " v4l2 driver version %d.%d.%d loaded\n",
(CX231XX_VERSION_CODE >> 16) & 0xff,
(CX231XX_VERSION_CODE >> 8) & 0xff, CX231XX_VERSION_CODE & 0xff);
/* register this driver with the USB subsystem */
result = usb_register(&cx231xx_usb_driver);
if (result)
cx231xx_err(DRIVER_NAME
" usb_register failed. Error number %d.\n", result);
return result;
}
static void __exit cx231xx_module_exit(void)
{
/* deregister this driver with the USB subsystem */
usb_deregister(&cx231xx_usb_driver);
}
module_init(cx231xx_module_init);
module_exit(cx231xx_module_exit);
/*
cx231xx_conf-reg.h - driver for Conexant Cx23100/101/102 USB
video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _POLARIS_REG_H_
#define _POLARIS_REG_H_
#define BOARD_CFG_STAT 0x0
#define TS_MODE_REG 0x4
#define TS1_CFG_REG 0x8
#define TS1_LENGTH_REG 0xc
#define TS2_CFG_REG 0x10
#define TS2_LENGTH_REG 0x14
#define EP_MODE_SET 0x18
#define CIR_PWR_PTN1 0x1c
#define CIR_PWR_PTN2 0x20
#define CIR_PWR_PTN3 0x24
#define CIR_PWR_MASK0 0x28
#define CIR_PWR_MASK1 0x2c
#define CIR_PWR_MASK2 0x30
#define CIR_GAIN 0x34
#define CIR_CAR_REG 0x38
#define CIR_OT_CFG1 0x40
#define CIR_OT_CFG2 0x44
#define PWR_CTL_EN 0x74
/* Polaris Endpoints capture mask for register EP_MODE_SET */
#define ENABLE_EP1 0x01 /* Bit[0]=1 */
#define ENABLE_EP2 0x02 /* Bit[1]=1 */
#define ENABLE_EP3 0x04 /* Bit[2]=1 */
#define ENABLE_EP4 0x08 /* Bit[3]=1 */
#define ENABLE_EP5 0x10 /* Bit[4]=1 */
#define ENABLE_EP6 0x20 /* Bit[5]=1 */
/* Bit definition for register PWR_CTL_EN */
#define PWR_MODE_MASK 0x17f
#define PWR_AV_EN 0x08 /* bit3 */
#define PWR_ISO_EN 0x40 /* bit6 */
#define PWR_AV_MODE 0x30 /* bit4,5 */
#define PWR_TUNER_EN 0x04 /* bit2 */
#define PWR_DEMOD_EN 0x02 /* bit1 */
#define I2C_DEMOD_EN 0x01 /* bit0 */
#define PWR_RESETOUT_EN 0x100 /* bit8 */
typedef enum{
POLARIS_AVMODE_DEFAULT = 0,
POLARIS_AVMODE_DIGITAL = 0x10,
POLARIS_AVMODE_ANALOGT_TV = 0x20,
POLARIS_AVMODE_ENXTERNAL_AV = 0x30,
}AV_MODE;
/* Colibri Registers */
#define SINGLE_ENDED 0x0
#define LOW_IF 0x4
#define EU_IF 0x9
#define US_IF 0xa
#define SUP_BLK_TUNE1 0x00
#define SUP_BLK_TUNE2 0x01
#define SUP_BLK_TUNE3 0x02
#define SUP_BLK_XTAL 0x03
#define SUP_BLK_PLL1 0x04
#define SUP_BLK_PLL2 0x05
#define SUP_BLK_PLL3 0x06
#define SUP_BLK_REF 0x07
#define SUP_BLK_PWRDN 0x08
#define SUP_BLK_TESTPAD 0x09
#define ADC_COM_INT5_STAB_REF 0x0a
#define ADC_COM_QUANT 0x0b
#define ADC_COM_BIAS1 0x0c
#define ADC_COM_BIAS2 0x0d
#define ADC_COM_BIAS3 0x0e
#define TESTBUS_CTRL 0x12
#define ADC_STATUS_CH1 0x20
#define ADC_STATUS_CH2 0x40
#define ADC_STATUS_CH3 0x60
#define ADC_STATUS2_CH1 0x21
#define ADC_STATUS2_CH2 0x41
#define ADC_STATUS2_CH3 0x61
#define ADC_CAL_ATEST_CH1 0x22
#define ADC_CAL_ATEST_CH2 0x42
#define ADC_CAL_ATEST_CH3 0x62
#define ADC_PWRDN_CLAMP_CH1 0x23
#define ADC_PWRDN_CLAMP_CH2 0x43
#define ADC_PWRDN_CLAMP_CH3 0x63
#define ADC_CTRL_DAC23_CH1 0x24
#define ADC_CTRL_DAC23_CH2 0x44
#define ADC_CTRL_DAC23_CH3 0x64
#define ADC_CTRL_DAC1_CH1 0x25
#define ADC_CTRL_DAC1_CH2 0x45
#define ADC_CTRL_DAC1_CH3 0x65
#define ADC_DCSERVO_DEM_CH1 0x26
#define ADC_DCSERVO_DEM_CH2 0x46
#define ADC_DCSERVO_DEM_CH3 0x66
#define ADC_FB_FRCRST_CH1 0x27
#define ADC_FB_FRCRST_CH2 0x47
#define ADC_FB_FRCRST_CH3 0x67
#define ADC_INPUT_CH1 0x28
#define ADC_INPUT_CH2 0x48
#define ADC_INPUT_CH3 0x68
#define INPUT_SEL_MASK 0x30 /* [5:4] in_sel */
#define ADC_NTF_PRECLMP_EN_CH1 0x29
#define ADC_NTF_PRECLMP_EN_CH2 0x49
#define ADC_NTF_PRECLMP_EN_CH3 0x69
#define ADC_QGAIN_RES_TRM_CH1 0x2a
#define ADC_QGAIN_RES_TRM_CH2 0x4a
#define ADC_QGAIN_RES_TRM_CH3 0x6a
#define ADC_SOC_PRECLMP_TERM_CH1 0x2b
#define ADC_SOC_PRECLMP_TERM_CH2 0x4b
#define ADC_SOC_PRECLMP_TERM_CH3 0x6b
#define TESTBUS_CTRL_CH1 0x32
#define TESTBUS_CTRL_CH2 0x52
#define TESTBUS_CTRL_CH3 0x72
/******************************************************************************
* DIF registers *
******************************************************************************/
#define DIRECT_IF_REVB_BASE 0x00300
/*****************************************************************************/
#define DIF_PLL_FREQ_WORD (DIRECT_IF_REVB_BASE + 0x00000000) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_PLL_LOCK 0x80000000
/* Reserved [30:29] */
#define FLD_DIF_PLL_FREE_RUN 0x10000000
#define FLD_DIF_PLL_FREQ 0x0FFFFFFF
/*****************************************************************************/
#define DIF_PLL_CTRL (DIRECT_IF_REVB_BASE + 0x00000004) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_KD_PD 0xFF000000
/* Reserved [23:20] */
#define FLD_DIF_KDS_PD 0x000F0000
#define FLD_DIF_KI_PD 0x0000FF00
/* Reserved [7:4] */
#define FLD_DIF_KIS_PD 0x0000000F
/*****************************************************************************/
#define DIF_PLL_CTRL1 (DIRECT_IF_REVB_BASE + 0x00000008) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_KD_FD 0xFF000000
/* Reserved [23:20] */
#define FLD_DIF_KDS_FD 0x000F0000
#define FLD_DIF_KI_FD 0x0000FF00
#define FLD_DIF_SIG_PROP_SZ 0x000000F0
#define FLD_DIF_KIS_FD 0x0000000F
/*****************************************************************************/
#define DIF_PLL_CTRL2 (DIRECT_IF_REVB_BASE + 0x0000000C) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_PLL_AGC_REF 0xFFF00000
#define FLD_DIF_PLL_AGC_KI 0x000F0000
/* Reserved [15] */
#define FLD_DIF_FREQ_LIMIT 0x00007000
#define FLD_DIF_K_FD 0x00000F00
#define FLD_DIF_DOWNSMPL_FD 0x000000FF
/*****************************************************************************/
#define DIF_PLL_CTRL3 (DIRECT_IF_REVB_BASE + 0x00000010) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:16] */
#define FLD_DIF_PLL_AGC_EN 0x00008000
/* Reserved [14:12] */
#define FLD_DIF_PLL_MAN_GAIN 0x00000FFF
/*****************************************************************************/
#define DIF_AGC_IF_REF (DIRECT_IF_REVB_BASE + 0x00000014) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_K_AGC_RF 0xF0000000
#define FLD_DIF_K_AGC_IF 0x0F000000
#define FLD_DIF_K_AGC_INT 0x00F00000
/* Reserved [19:12] */
#define FLD_DIF_IF_REF 0x00000FFF
/*****************************************************************************/
#define DIF_AGC_CTRL_IF (DIRECT_IF_REVB_BASE + 0x00000018) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_IF_MAX 0xFF000000
#define FLD_DIF_IF_MIN 0x00FF0000
#define FLD_DIF_IF_AGC 0x0000FFFF
/*****************************************************************************/
#define DIF_AGC_CTRL_INT (DIRECT_IF_REVB_BASE + 0x0000001C) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_INT_MAX 0xFF000000
#define FLD_DIF_INT_MIN 0x00FF0000
#define FLD_DIF_INT_AGC 0x0000FFFF
/*****************************************************************************/
#define DIF_AGC_CTRL_RF (DIRECT_IF_REVB_BASE + 0x00000020) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_RF_MAX 0xFF000000
#define FLD_DIF_RF_MIN 0x00FF0000
#define FLD_DIF_RF_AGC 0x0000FFFF
/*****************************************************************************/
#define DIF_AGC_IF_INT_CURRENT (DIRECT_IF_REVB_BASE + 0x00000024) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_IF_AGC_IN 0xFFFF0000
#define FLD_DIF_INT_AGC_IN 0x0000FFFF
/*****************************************************************************/
#define DIF_AGC_RF_CURRENT (DIRECT_IF_REVB_BASE + 0x00000028) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:16] */
#define FLD_DIF_RF_AGC_IN 0x0000FFFF
/*****************************************************************************/
#define DIF_VIDEO_AGC_CTRL (DIRECT_IF_REVB_BASE + 0x0000002C) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_AFD 0xC0000000
#define FLD_DIF_K_VID_AGC 0x30000000
#define FLD_DIF_LINE_LENGTH 0x0FFF0000
#define FLD_DIF_AGC_GAIN 0x0000FFFF
/*****************************************************************************/
#define DIF_VID_AUD_OVERRIDE (DIRECT_IF_REVB_BASE + 0x00000030) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_AUDIO_AGC_OVERRIDE 0x80000000
/* Reserved [30:30] */
#define FLD_DIF_AUDIO_MAN_GAIN 0x3F000000
/* Reserved [23:17] */
#define FLD_DIF_VID_AGC_OVERRIDE 0x00010000
#define FLD_DIF_VID_MAN_GAIN 0x0000FFFF
/*****************************************************************************/
#define DIF_AV_SEP_CTRL (DIRECT_IF_REVB_BASE + 0x00000034) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_LPF_FREQ 0xC0000000
#define FLD_DIF_AV_PHASE_INC 0x3F000000
#define FLD_DIF_AUDIO_FREQ 0x00FFFFFF
/*****************************************************************************/
#define DIF_COMP_FLT_CTRL (DIRECT_IF_REVB_BASE + 0x00000038) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:24] */
#define FLD_DIF_IIR23_R2 0x00FF0000
#define FLD_DIF_IIR23_R1 0x0000FF00
#define FLD_DIF_IIR1_R1 0x000000FF
/*****************************************************************************/
#define DIF_MISC_CTRL (DIRECT_IF_REVB_BASE + 0x0000003C) /* Reg Size 32 */
/*****************************************************************************/
#define FLD_DIF_DIF_BYPASS 0x80000000
#define FLD_DIF_FM_NYQ_GAIN 0x40000000
#define FLD_DIF_RF_AGC_ENA 0x20000000
#define FLD_DIF_INT_AGC_ENA 0x10000000
#define FLD_DIF_IF_AGC_ENA 0x08000000
#define FLD_DIF_FORCE_RF_IF_LOCK 0x04000000
#define FLD_DIF_VIDEO_AGC_ENA 0x02000000
#define FLD_DIF_RF_AGC_INV 0x01000000
#define FLD_DIF_INT_AGC_INV 0x00800000
#define FLD_DIF_IF_AGC_INV 0x00400000
#define FLD_DIF_SPEC_INV 0x00200000
#define FLD_DIF_AUD_FULL_BW 0x00100000
#define FLD_DIF_AUD_SRC_SEL 0x00080000
/* Reserved [18] */
#define FLD_DIF_IF_FREQ 0x00030000
/* Reserved [15:14] */
#define FLD_DIF_TIP_OFFSET 0x00003F00
/* Reserved [7:5] */
#define FLD_DIF_DITHER_ENA 0x00000010
/* Reserved [3:1] */
#define FLD_DIF_RF_IF_LOCK 0x00000001
/*****************************************************************************/
#define DIF_SRC_PHASE_INC (DIRECT_IF_REVB_BASE + 0x00000040) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:29] */
#define FLD_DIF_PHASE_INC 0x1FFFFFFF
/*****************************************************************************/
#define DIF_SRC_GAIN_CONTROL (DIRECT_IF_REVB_BASE + 0x00000044) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:16] */
#define FLD_DIF_SRC_KI 0x0000FF00
#define FLD_DIF_SRC_KD 0x000000FF
/*****************************************************************************/
#define DIF_BPF_COEFF01 (DIRECT_IF_REVB_BASE + 0x00000048) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:19] */
#define FLD_DIF_BPF_COEFF_0 0x00070000
/* Reserved [15:4] */
#define FLD_DIF_BPF_COEFF_1 0x0000000F
/*****************************************************************************/
#define DIF_BPF_COEFF23 (DIRECT_IF_REVB_BASE + 0x0000004c) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:22] */
#define FLD_DIF_BPF_COEFF_2 0x003F0000
/* Reserved [15:7] */
#define FLD_DIF_BPF_COEFF_3 0x0000007F
/*****************************************************************************/
#define DIF_BPF_COEFF45 (DIRECT_IF_REVB_BASE + 0x00000050) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:24] */
#define FLD_DIF_BPF_COEFF_4 0x00FF0000
/* Reserved [15:8] */
#define FLD_DIF_BPF_COEFF_5 0x000000FF
/*****************************************************************************/
#define DIF_BPF_COEFF67 (DIRECT_IF_REVB_BASE + 0x00000054) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:25] */
#define FLD_DIF_BPF_COEFF_6 0x01FF0000
/* Reserved [15:9] */
#define FLD_DIF_BPF_COEFF_7 0x000001FF
/*****************************************************************************/
#define DIF_BPF_COEFF89 (DIRECT_IF_REVB_BASE + 0x00000058) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:26] */
#define FLD_DIF_BPF_COEFF_8 0x03FF0000
/* Reserved [15:10] */
#define FLD_DIF_BPF_COEFF_9 0x000003FF
/*****************************************************************************/
#define DIF_BPF_COEFF1011 (DIRECT_IF_REVB_BASE + 0x0000005C) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:27] */
#define FLD_DIF_BPF_COEFF_10 0x07FF0000
/* Reserved [15:11] */
#define FLD_DIF_BPF_COEFF_11 0x000007FF
/*****************************************************************************/
#define DIF_BPF_COEFF1213 (DIRECT_IF_REVB_BASE + 0x00000060) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:27] */
#define FLD_DIF_BPF_COEFF_12 0x07FF0000
/* Reserved [15:12] */
#define FLD_DIF_BPF_COEFF_13 0x00000FFF
/*****************************************************************************/
#define DIF_BPF_COEFF1415 (DIRECT_IF_REVB_BASE + 0x00000064) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:28] */
#define FLD_DIF_BPF_COEFF_14 0x0FFF0000
/* Reserved [15:12] */
#define FLD_DIF_BPF_COEFF_15 0x00000FFF
/*****************************************************************************/
#define DIF_BPF_COEFF1617 (DIRECT_IF_REVB_BASE + 0x00000068) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:29] */
#define FLD_DIF_BPF_COEFF_16 0x1FFF0000
/* Reserved [15:13] */
#define FLD_DIF_BPF_COEFF_17 0x00001FFF
/*****************************************************************************/
#define DIF_BPF_COEFF1819 (DIRECT_IF_REVB_BASE + 0x0000006C) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:29] */
#define FLD_DIF_BPF_COEFF_18 0x1FFF0000
/* Reserved [15:13] */
#define FLD_DIF_BPF_COEFF_19 0x00001FFF
/*****************************************************************************/
#define DIF_BPF_COEFF2021 (DIRECT_IF_REVB_BASE + 0x00000070) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:29] */
#define FLD_DIF_BPF_COEFF_20 0x1FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_21 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF2223 (DIRECT_IF_REVB_BASE + 0x00000074) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_22 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_23 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF2425 (DIRECT_IF_REVB_BASE + 0x00000078) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_24 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_25 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF2627 (DIRECT_IF_REVB_BASE + 0x0000007C) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_26 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_27 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF2829 (DIRECT_IF_REVB_BASE + 0x00000080) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_28 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_29 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF3031 (DIRECT_IF_REVB_BASE + 0x00000084) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_30 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_31 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF3233 (DIRECT_IF_REVB_BASE + 0x00000088) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_32 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_33 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF3435 (DIRECT_IF_REVB_BASE + 0x0000008C) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_34 0x3FFF0000
/* Reserved [15:14] */
#define FLD_DIF_BPF_COEFF_35 0x00003FFF
/*****************************************************************************/
#define DIF_BPF_COEFF36 (DIRECT_IF_REVB_BASE + 0x00000090) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:30] */
#define FLD_DIF_BPF_COEFF_36 0x3FFF0000
/* Reserved [15:0] */
/*****************************************************************************/
#define DIF_RPT_VARIANCE (DIRECT_IF_REVB_BASE + 0x00000094) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:20] */
#define FLD_DIF_RPT_VARIANCE 0x000FFFFF
/*****************************************************************************/
#define DIF_SOFT_RST_CTRL_REVB (DIRECT_IF_REVB_BASE + 0x00000098) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:8] */
#define FLD_DIF_DIF_SOFT_RST 0x00000080
#define FLD_DIF_DIF_REG_RST_MSK 0x00000040
#define FLD_DIF_AGC_RST_MSK 0x00000020
#define FLD_DIF_CMP_RST_MSK 0x00000010
#define FLD_DIF_AVS_RST_MSK 0x00000008
#define FLD_DIF_NYQ_RST_MSK 0x00000004
#define FLD_DIF_DIF_SRC_RST_MSK 0x00000002
#define FLD_DIF_PLL_RST_MSK 0x00000001
/*****************************************************************************/
#define DIF_PLL_FREQ_ERR (DIRECT_IF_REVB_BASE + 0x0000009C) /* Reg Size 32 */
/*****************************************************************************/
/* Reserved [31:25] */
#define FLD_DIF_CTL_IP 0x01FFFFFF
#endif
/*
cx231xx-core.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
#include "cx231xx.h"
#include "cx231xx-reg.h"
/* #define ENABLE_DEBUG_ISOC_FRAMES */
static unsigned int core_debug;
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
#define cx231xx_coredbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static unsigned int reg_debug;
module_param(reg_debug,int,0644);
MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
#define cx231xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static int alt = CX231XX_PINOUT;
module_param(alt, int, 0644);
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
/* FIXME */
#define cx231xx_isocdbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
/************************************************************************************
* Device control list functions *
*************************************************************************************/
static LIST_HEAD(cx231xx_devlist);
static DEFINE_MUTEX(cx231xx_devlist_mutex);
struct cx231xx *cx231xx_get_device(int minor,
enum v4l2_buf_type *fh_type,
int *has_radio)
{
struct cx231xx *h, *dev = NULL;
*fh_type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
*has_radio = 0;
mutex_lock(&cx231xx_devlist_mutex);
list_for_each_entry(h, &cx231xx_devlist, devlist) {
if (h->vdev->minor == minor)
dev = h;
if (h->vbi_dev->minor == minor) {
dev = h;
*fh_type = V4L2_BUF_TYPE_VBI_CAPTURE;
}
if (h->radio_dev &&
h->radio_dev->minor == minor) {
dev = h;
*has_radio = 1;
}
}
mutex_unlock(&cx231xx_devlist_mutex);
return dev;
}
/*
* cx231xx_realease_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconected or at module unload
*/
void cx231xx_remove_from_devlist(struct cx231xx *dev)
{
mutex_lock(&cx231xx_devlist_mutex);
list_del(&dev->devlist);
mutex_unlock(&cx231xx_devlist_mutex);
};
void cx231xx_add_into_devlist(struct cx231xx *dev)
{
mutex_lock(&cx231xx_devlist_mutex);
list_add_tail(&dev->devlist, &cx231xx_devlist);
mutex_unlock(&cx231xx_devlist_mutex);
};
static LIST_HEAD(cx231xx_extension_devlist);
static DEFINE_MUTEX(cx231xx_extension_devlist_lock);
int cx231xx_register_extension(struct cx231xx_ops *ops)
{
struct cx231xx *dev = NULL;
mutex_lock(&cx231xx_devlist_mutex);
mutex_lock(&cx231xx_extension_devlist_lock);
list_add_tail(&ops->next, &cx231xx_extension_devlist);
list_for_each_entry(dev, &cx231xx_devlist, devlist) {
if (dev)
ops->init(dev);
}
cx231xx_info("Cx231xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&cx231xx_extension_devlist_lock);
mutex_unlock(&cx231xx_devlist_mutex);
return 0;
}
EXPORT_SYMBOL(cx231xx_register_extension);
void cx231xx_unregister_extension(struct cx231xx_ops *ops)
{
struct cx231xx *dev = NULL;
mutex_lock(&cx231xx_devlist_mutex);
list_for_each_entry(dev, &cx231xx_devlist, devlist) {
if (dev)
ops->fini(dev);
}
mutex_lock(&cx231xx_extension_devlist_lock);
cx231xx_info("Cx231xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&cx231xx_extension_devlist_lock);
mutex_unlock(&cx231xx_devlist_mutex);
}
EXPORT_SYMBOL(cx231xx_unregister_extension);
void cx231xx_init_extension(struct cx231xx *dev)
{
struct cx231xx_ops *ops = NULL;
mutex_lock(&cx231xx_extension_devlist_lock);
if (!list_empty(&cx231xx_extension_devlist)) {
list_for_each_entry(ops, &cx231xx_extension_devlist, next) {
if (ops->init)
ops->init(dev);
}
}
mutex_unlock(&cx231xx_extension_devlist_lock);
}
void cx231xx_close_extension(struct cx231xx *dev)
{
struct cx231xx_ops *ops = NULL;
mutex_lock(&cx231xx_extension_devlist_lock);
if (!list_empty(&cx231xx_extension_devlist)) {
list_for_each_entry(ops, &cx231xx_extension_devlist, next) {
if (ops->fini)
ops->fini(dev);
}
}
mutex_unlock(&cx231xx_extension_devlist_lock);
}
/************************************************************************************
* U S B related functions *
*************************************************************************************/
int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
struct cx231xx_i2c_xfer_data *req_data)
{
int status = 0;
struct cx231xx *dev = i2c_bus->dev;
VENDOR_REQUEST_IN ven_req;
u8 saddr_len = 0;
u8 _i2c_period = 0;
u8 _i2c_nostop = 0;
u8 _i2c_reserve = 0;
/* Get the I2C period, nostop and reserve parameters */
_i2c_period = i2c_bus->i2c_period;
_i2c_nostop = i2c_bus->i2c_nostop;
_i2c_reserve = i2c_bus->i2c_reserve;
saddr_len = req_data->saddr_len;
/* Set wValue */
if(saddr_len == 1) /* need check saddr_len == 0 */
ven_req.wValue = req_data->dev_addr<<9|_i2c_period<<4|saddr_len<<2|
_i2c_nostop<<1|I2C_SYNC|_i2c_reserve<<6;
else
ven_req.wValue = req_data->dev_addr<<9|_i2c_period<<4|saddr_len<<2|
_i2c_nostop<<1|I2C_SYNC|_i2c_reserve<<6;
/* set channel number */
if(req_data->direction & I2C_M_RD)
ven_req.bRequest = i2c_bus->nr + 4; /* channel number, for read,
spec required channel_num +4 */
else
ven_req.bRequest = i2c_bus->nr; /* channel number, */
/* set index value */
switch(saddr_len){
case 0:
ven_req.wIndex = 0; /* need check */
break;
case 1:
ven_req.wIndex = (req_data->saddr_dat & 0xff);
break;
case 2:
ven_req.wIndex = req_data->saddr_dat;
break;
}
/* set wLength value */
ven_req.wLength = req_data->buf_size;
/* set bData value */
ven_req.bData = 0;
/* set the direction */
if(req_data->direction){
ven_req.direction = USB_DIR_IN;
memset(req_data->p_buffer, 0x00, ven_req.wLength);
}
else
ven_req.direction = USB_DIR_OUT;
/* set the buffer for read / write */
ven_req.pBuff = req_data->p_buffer;
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
cx231xx_info("UsbInterface::sendCommand, output buffer failed with status -%d\n", status);
}
return status;
}
EXPORT_SYMBOL_GPL(cx231xx_send_usb_command);
/*
* cx231xx_read_ctrl_reg()
* reads data from the usb device specifying bRequest and wValue
*/
int cx231xx_read_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg,
char *buf, int len)
{
u8 val = 0;
int ret;
int pipe = usb_rcvctrlpipe(dev->udev, 0);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
if (len > URB_MAX_CTRL_SIZE)
return -EINVAL;
switch(len)
{
case 1:
val = ENABLE_ONE_BYTE;
break;
case 2:
val = ENABLE_TWE_BYTE;
break;
case 3:
val = ENABLE_THREE_BYTE;
break;
case 4:
val = ENABLE_FOUR_BYTE;
break;
default:
val = 0xFF; /* invalid option */
}
if(val == 0xFF)
return -EINVAL;
if (reg_debug) {
cx231xx_isocdbg("(pipe 0x%08x): "
"IN: %02x %02x %02x %02x %02x %02x %02x %02x ",
pipe,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, val,
reg & 0xff, reg >> 8,
len & 0xff, len >> 8);
}
/* mutex_lock(&dev->ctrl_urb_lock); */
ret = usb_control_msg(dev->udev, pipe, req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
val, reg, dev->urb_buf, len, HZ);
if (ret < 0) {
cx231xx_isocdbg(" failed!\n");
/* mutex_unlock(&dev->ctrl_urb_lock); */
return ret;
}
if (len)
memcpy(buf, dev->urb_buf, len);
/* mutex_unlock(&dev->ctrl_urb_lock); */
if (reg_debug) {
int byte;
cx231xx_isocdbg("<<<");
for (byte = 0; byte < len; byte++)
cx231xx_isocdbg(" %02x", (unsigned char)buf[byte]);
cx231xx_isocdbg("\n");
}
return ret;
}
int cx231xx_send_vendor_cmd(struct cx231xx *dev, VENDOR_REQUEST_IN *ven_req)
{
int ret;
int pipe = 0;
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
if ((ven_req->wLength > URB_MAX_CTRL_SIZE))
return -EINVAL;
if(ven_req->direction)
pipe = usb_rcvctrlpipe(dev->udev, 0);
else
pipe = usb_sndctrlpipe(dev->udev, 0);
if (reg_debug) {
int byte;
cx231xx_isocdbg("(pipe 0x%08x): "
"OUT: %02x %02x %02x %04x %04x %04x >>>",
pipe,
ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
ven_req->bRequest, 0, ven_req->wValue,
ven_req->wIndex,
ven_req->wLength);
for (byte = 0; byte < ven_req->wLength; byte++)
cx231xx_isocdbg(" %02x", (unsigned char)ven_req->pBuff[byte]);
cx231xx_isocdbg("\n");
}
/* mutex_lock(&dev->ctrl_urb_lock); */
ret = usb_control_msg(dev->udev, pipe, ven_req->bRequest,
ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
ven_req->wValue, ven_req->wIndex, ven_req->pBuff, ven_req->wLength, HZ);
/* mutex_unlock(&dev->ctrl_urb_lock); */
return ret;
}
/*
* cx231xx_write_ctrl_reg()
* sends data to the usb device, specifying bRequest
*/
int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, char *buf,
int len)
{
u8 val = 0;
int ret;
int pipe = usb_sndctrlpipe(dev->udev, 0);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
switch(len)
{
case 1:
val = ENABLE_ONE_BYTE;
break;
case 2:
val = ENABLE_TWE_BYTE;
break;
case 3:
val = ENABLE_THREE_BYTE;
break;
case 4:
val = ENABLE_FOUR_BYTE;
break;
default:
val = 0xFF; /* invalid option */
}
if(val == 0xFF)
return -EINVAL;
if (reg_debug) {
int byte;
cx231xx_isocdbg("(pipe 0x%08x): "
"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
pipe,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
req, 0, val,
reg & 0xff, reg >> 8,
len & 0xff, len >> 8);
for (byte = 0; byte < len; byte++)
cx231xx_isocdbg(" %02x", (unsigned char)buf[byte]);
cx231xx_isocdbg("\n");
}
/* mutex_lock(&dev->ctrl_urb_lock); */
memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, pipe, req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
val, reg, dev->urb_buf, len, HZ);
/* mutex_unlock(&dev->ctrl_urb_lock); */
return ret;
}
/************************************************************************************
* USB Alternate Setting functions *
*************************************************************************************/
int cx231xx_set_video_alternate(struct cx231xx *dev)
{
int errCode, prev_alt = dev->video_mode.alt;
unsigned int min_pkt_size = dev->width * 2 + 4;
u32 usb_interface_index = 0;
/* When image size is bigger than a certain value,
the frame size should be increased, otherwise, only
green screen will be received.
*/
if (dev->width * 2 * dev->height > 720 * 240 * 2)
min_pkt_size *= 2;
if(dev->width > 360) {
/* resolutions: 720,704,640 */
dev->video_mode.alt = 3;
} else if(dev->width > 180) {
/* resolutions: 360,352,320,240 */
dev->video_mode.alt = 2;
} else if(dev->width > 0) {
/* resolutions: 180,176,160,128,88 */
dev->video_mode.alt = 1;
} else {
/* Change to alt0 BULK to release USB bandwidth */
dev->video_mode.alt = 0;
}
/* Get the correct video interface Index */
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.video_index+1;
if (dev->video_mode.alt != prev_alt) {
cx231xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
min_pkt_size, dev->video_mode.alt);
dev->video_mode.max_pkt_size = dev->video_mode.alt_max_pkt_size[dev->video_mode.alt];
cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n",
dev->video_mode.alt, dev->video_mode.max_pkt_size);
cx231xx_info(" setting alternate %d with wMaxPacketSize=%u , Interface = %d\n",
dev->video_mode.alt, dev->video_mode.max_pkt_size, usb_interface_index);
errCode = usb_set_interface(dev->udev, usb_interface_index, dev->video_mode.alt);
if (errCode < 0) {
cx231xx_errdev("cannot change alternate number to %d (error=%i)\n",
dev->video_mode.alt, errCode);
return errCode;
}
}
return 0;
}
int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt)
{
int status = 0;
u32 usb_interface_index = 0;
u32 max_pkt_size = 0;
switch(index) {
case INDEX_TS1:
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index+1;
dev->video_mode.alt = alt;
if(dev->ts1_mode.alt_max_pkt_size != NULL)
max_pkt_size = dev->ts1_mode.max_pkt_size = dev->ts1_mode.alt_max_pkt_size[dev->ts1_mode.alt];
break;
case INDEX_TS2:
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.ts2_index+1;
break;
case INDEX_AUDIO:
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.audio_index+1;
dev->adev.alt = alt;
if( dev->adev.alt_max_pkt_size != NULL)
max_pkt_size = dev->adev.max_pkt_size = dev->adev.alt_max_pkt_size[dev->adev.alt];
break;
case INDEX_VIDEO:
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.video_index+1;
dev->video_mode.alt = alt;
if(dev->video_mode.alt_max_pkt_size != NULL)
max_pkt_size = dev->video_mode.max_pkt_size = dev->video_mode.alt_max_pkt_size[dev->video_mode.alt];
break;
case INDEX_VANC:
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index+1;
dev->vbi_mode.alt = alt;
if(dev->vbi_mode.alt_max_pkt_size != NULL)
max_pkt_size = dev->vbi_mode.max_pkt_size = dev->vbi_mode.alt_max_pkt_size[dev->vbi_mode.alt];
break;
case INDEX_HANC:
usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index+1;
dev->sliced_cc_mode.alt = alt;
if(dev->sliced_cc_mode.alt_max_pkt_size != NULL)
max_pkt_size = dev->sliced_cc_mode.max_pkt_size = dev->sliced_cc_mode.alt_max_pkt_size[dev->sliced_cc_mode.alt];
break;
default:
break;
}
if(alt > 0 && max_pkt_size == 0 ) {
cx231xx_errdev("cannot change interface %d alternate number to %d : Max. Pkt size is ZERO\n",
usb_interface_index, alt);
return -1;
}
cx231xx_info(" setting alternate %d with wMaxPacketSize=%u , Interface = %d\n",
alt, max_pkt_size, usb_interface_index);
if(usb_interface_index > 0 ) {
status = usb_set_interface(dev->udev, usb_interface_index, alt);
if (status < 0) {
cx231xx_errdev("cannot change interface %d alternate number to %d (error=%i)\n",
usb_interface_index, alt, status);
return status;
}
}
return status;
}
EXPORT_SYMBOL_GPL(cx231xx_set_alt_setting);
int cx231xx_gpio_set(struct cx231xx *dev, struct cx231xx_reg_seq *gpio)
{
int rc = 0;
if (!gpio)
return rc;
/* Send GPIO reset sequences specified at board entry */
while (gpio->sleep >= 0) {
rc = cx231xx_set_gpio_value(dev, gpio->bit,
gpio->val);
if (rc < 0)
return rc;
if (gpio->sleep > 0)
msleep(gpio->sleep);
gpio++;
}
return rc;
}
int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
{
if (dev->mode == set_mode)
return 0;
if (set_mode == CX231XX_SUSPEND) {
/* Set the chip in power saving mode */
dev->mode = set_mode;
}
/* Resource is locked */
if (dev->mode != CX231XX_SUSPEND)
return -EINVAL;
dev->mode = set_mode;
if (dev->mode == CX231XX_DIGITAL_MODE) {
/* Set Digital power mode */
} else {
/* Set Analog Power mode*/
}
return 0;
}
EXPORT_SYMBOL_GPL(cx231xx_set_mode);
/************************************************************************************
* URB Streaming functions *
*************************************************************************************/
/*
* IRQ callback, called by URB callback
*/
static void cx231xx_irq_callback(struct urb *urb)
{
struct cx231xx_dmaqueue *dma_q = urb->context;
struct cx231xx_video_mode *vmode = container_of(dma_q, struct cx231xx_video_mode, vidq);
struct cx231xx *dev = container_of(vmode, struct cx231xx, video_mode);
int rc, i;
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
case -ESHUTDOWN:
return;
default: /* error */
cx231xx_isocdbg("urb completition error %d.\n", urb->status);
break;
}
/* Copy data from URB */
spin_lock(&dev->video_mode.slock);
rc = dev->video_mode.isoc_ctl.isoc_copy(dev, urb);
spin_unlock(&dev->video_mode.slock);
/* Reset urb buffers */
for (i = 0; i < urb->number_of_packets; i++) {
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
urb->status = 0;
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
cx231xx_isocdbg("urb resubmit failed (error=%i)\n",
urb->status);
}
}
/*
* Stop and Deallocate URBs
*/
void cx231xx_uninit_isoc(struct cx231xx *dev)
{
struct urb *urb;
int i;
cx231xx_isocdbg("cx231xx: called cx231xx_uninit_isoc\n");
dev->video_mode.isoc_ctl.nfields = -1;
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = dev->video_mode.isoc_ctl.urb[i];
if (urb) {
if (!irqs_disabled())
usb_kill_urb(urb);
else
usb_unlink_urb(urb);
if (dev->video_mode.isoc_ctl.transfer_buffer[i]) {
usb_buffer_free(dev->udev,
urb->transfer_buffer_length,
dev->video_mode.isoc_ctl.transfer_buffer[i],
urb->transfer_dma);
}
usb_free_urb(urb);
dev->video_mode.isoc_ctl.urb[i] = NULL;
}
dev->video_mode.isoc_ctl.transfer_buffer[i] = NULL;
}
kfree(dev->video_mode.isoc_ctl.urb);
kfree(dev->video_mode.isoc_ctl.transfer_buffer);
dev->video_mode.isoc_ctl.urb = NULL;
dev->video_mode.isoc_ctl.transfer_buffer = NULL;
dev->video_mode.isoc_ctl.num_bufs = 0;
cx231xx_capture_start(dev, 0, Raw_Video);
}
EXPORT_SYMBOL_GPL(cx231xx_uninit_isoc);
/*
* Allocate URBs and start IRQ
*/
int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
int num_bufs, int max_pkt_size,
int (*isoc_copy) (struct cx231xx *dev, struct urb *urb))
{
struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq;
int i;
int sb_size, pipe;
struct urb *urb;
int j, k;
int rc;
cx231xx_isocdbg("cx231xx: called cx231xx_prepare_isoc\n");
dev->video_input = dev->video_input > 2?2:dev->video_input;
cx231xx_info("Setting Video mux to %d\n",dev->video_input);
video_mux(dev, dev->video_input);
/* De-allocates all pending stuff */
cx231xx_uninit_isoc(dev);
dev->video_mode.isoc_ctl.isoc_copy = isoc_copy;
dev->video_mode.isoc_ctl.num_bufs = num_bufs;
dma_q->pos = 0;
dma_q->is_partial_line = 0;
dma_q->last_sav = 0;
dma_q->current_field = -1;
dma_q->field1_done = 0;
dma_q->lines_per_field = dev->height/2;
dma_q->bytes_left_in_line = dev->width << 1;
dma_q->lines_completed = 0;
for(i = 0; i < 8 ; i++)
dma_q->partial_buf[i] = 0;
dev->video_mode.isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.urb) {
cx231xx_errdev("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.transfer_buffer) {
cx231xx_errdev("cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.isoc_ctl.urb);
return -ENOMEM;
}
dev->video_mode.isoc_ctl.max_pkt_size = max_pkt_size;
dev->video_mode.isoc_ctl.buf = NULL;
sb_size = max_packets * dev->video_mode.isoc_ctl.max_pkt_size;
/* allocate urbs and transfer buffers */
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
cx231xx_err("cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
dev->video_mode.isoc_ctl.urb[i] = urb;
dev->video_mode.isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev,
sb_size, GFP_KERNEL, &urb->transfer_dma);
if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
cx231xx_err("unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
in_interrupt()?" while in int":"");
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
memset(dev->video_mode.isoc_ctl.transfer_buffer[i], 0, sb_size);
pipe = usb_rcvisocpipe(dev->udev, dev->video_mode.end_point_addr);
usb_fill_int_urb(urb, dev->udev, pipe,
dev->video_mode.isoc_ctl.transfer_buffer[i], sb_size,
cx231xx_irq_callback, dma_q, 1);
urb->number_of_packets = max_packets;
urb->transfer_flags = URB_ISO_ASAP;
k = 0;
for (j = 0; j < max_packets; j++) {
urb->iso_frame_desc[j].offset = k;
urb->iso_frame_desc[j].length =
dev->video_mode.isoc_ctl.max_pkt_size;
k += dev->video_mode.isoc_ctl.max_pkt_size;
}
}
init_waitqueue_head(&dma_q->wq);
/* submit urbs and enables IRQ */
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i], GFP_ATOMIC);
if (rc) {
cx231xx_err("submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_isoc(dev);
return rc;
}
}
cx231xx_capture_start(dev, 1, Raw_Video);
return 0;
}
EXPORT_SYMBOL_GPL(cx231xx_init_isoc);
/************************************************************************************
* Device Init/UnInit functions *
*************************************************************************************/
int cx231xx_dev_init(struct cx231xx *dev)
{
int errCode = 0;
/* Initialize I2C bus */
/* External Master 1 Bus */
dev->i2c_bus[0].nr = 0;
dev->i2c_bus[0].dev = dev;
dev->i2c_bus[0].i2c_period = I2C_SPEED_1M; /* 1MHz */
dev->i2c_bus[0].i2c_nostop = 0;
dev->i2c_bus[0].i2c_reserve = 0;
/* External Master 2 Bus */
dev->i2c_bus[1].nr = 1;
dev->i2c_bus[1].dev = dev;
dev->i2c_bus[1].i2c_period = I2C_SPEED_1M; /* 1MHz */
dev->i2c_bus[1].i2c_nostop = 0;
dev->i2c_bus[1].i2c_reserve = 0;
/* Internal Master 3 Bus */
dev->i2c_bus[2].nr = 2;
dev->i2c_bus[2].dev = dev;
dev->i2c_bus[2].i2c_period = I2C_SPEED_400K; /* 400kHz */
dev->i2c_bus[2].i2c_nostop = 0;
dev->i2c_bus[2].i2c_reserve = 0;
/* register I2C buses */
cx231xx_i2c_register(&dev->i2c_bus[0]);
cx231xx_i2c_register(&dev->i2c_bus[1]);
cx231xx_i2c_register(&dev->i2c_bus[2]);
/* init hardware */
/* Note : with out calling set power mode function, colibri can not be set up correctly */
errCode = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ANALOGT_TV);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* initialize Colibri block */
errCode = cx231xx_colibri_init_super_block(dev, 0x23c);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_colibri init super block - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
errCode = cx231xx_colibri_init_channels(dev);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_colibri init channels - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* Set DIF in By pass mode */
errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* flatiron related functions */
errCode = cx231xx_flatiron_initialize(dev);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_flatiron initialize - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* init control pins */
errCode = cx231xx_init_ctrl_pin_status(dev);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* set AGC mode to Analog */
errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
if (errCode < 0) {
cx231xx_errdev("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* set all alternate settings to zero initially */
cx231xx_set_alt_setting(dev, INDEX_VIDEO, 0);
cx231xx_set_alt_setting(dev, INDEX_VANC, 0);
cx231xx_set_alt_setting(dev, INDEX_HANC, 0);
if(dev->board.has_dvb)
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
/* set the I2C master port to 3 on channel 1 */
errCode = cx231xx_enable_i2c_for_tuner(dev, I2C_3);
return errCode;
}
EXPORT_SYMBOL_GPL(cx231xx_dev_init);
void cx231xx_dev_uninit(struct cx231xx *dev)
{
/* Un Initialize I2C bus */
cx231xx_i2c_unregister(&dev->i2c_bus[2]);
cx231xx_i2c_unregister(&dev->i2c_bus[1]);
cx231xx_i2c_unregister(&dev->i2c_bus[0]);
}
EXPORT_SYMBOL_GPL(cx231xx_dev_uninit);
/************************************************************************************
* G P I O related functions *
*************************************************************************************/
int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8* gpio_val,
u8 len, u8 request, u8 direction)
{
int status = 0;
VENDOR_REQUEST_IN ven_req;
/* Set wValue */
ven_req.wValue = (u16)(gpio_bit>>16 & 0xffff);
/* set request */
if(!request){
if(direction)
ven_req.bRequest = VRT_GET_GPIO; /* 0x8 gpio */
else
ven_req.bRequest = VRT_SET_GPIO; /* 0x9 gpio */
}
else {
if(direction)
ven_req.bRequest = VRT_GET_GPIE; /* 0xa gpie */
else
ven_req.bRequest = VRT_SET_GPIE; /* 0xb gpie */
}
/* set index value */
ven_req.wIndex = (u16)(gpio_bit & 0xffff);
/* set wLength value */
ven_req.wLength = len;
/* set bData value */
ven_req.bData = 0;
/* set the buffer for read / write */
ven_req.pBuff = gpio_val;
/* set the direction */
if(direction){
ven_req.direction = USB_DIR_IN;
memset(ven_req.pBuff, 0x00, ven_req.wLength);
}
else
ven_req.direction = USB_DIR_OUT;
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0)
{
cx231xx_info("UsbInterface::sendCommand, output buffer failed with status -%d\n", status);
}
return status;
}
EXPORT_SYMBOL_GPL(cx231xx_send_gpio_cmd);
/*************************************************************************************
* C O N T R O L - Register R E A D / W R I T E functions *
*************************************************************************************/
int cx231xx_mode_register(struct cx231xx *dev, u16 address, u32 mode)
{
u8 value[4] = {0x0, 0x0, 0x0, 0x0};
u32 tmp =0;
int status = 0;
status = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, address,value,4);
if(status < 0)
return status;
tmp = *((u32 *)value);
tmp |= mode;
value[0]=(u8) tmp;
value[1]=(u8)(tmp>>8);
value[2]=(u8)(tmp>>16);
value[3]=(u8)(tmp>>24);
status = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, address,value,4);
return status;
}
/*************************************************************************************
* I 2 C Internal C O N T R O L functions *
*************************************************************************************/
int cx231xx_read_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
u8 saddr_len, u32 *data, u8 data_len)
{
int status = 0;
struct cx231xx_i2c_xfer_data req_data;
u8 value[4] ={0,0,0,0};
if(saddr_len == 0)
saddr = 0;
else if(saddr_len == 0)
saddr &= 0xff;
/* prepare xfer_data struct */
req_data.dev_addr = dev_addr >> 1;
req_data.direction = I2C_M_RD;
req_data.saddr_len = saddr_len;
req_data.saddr_dat = saddr;
req_data.buf_size = data_len;
req_data.p_buffer = (u8*)value;
/* usb send command */
status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], &req_data);
if(status >= 0)
{
/* Copy the data read back to main buffer */
if(data_len == 1)
*data = value[0];
else
*data = value[0] | value[1] << 8 | value[2] << 16 | value[3] << 24;
}
return status;
}
int cx231xx_write_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
u8 saddr_len, u32 data, u8 data_len)
{
int status = 0;
u8 value[4] ={0,0,0,0};
struct cx231xx_i2c_xfer_data req_data;
value[0]=(u8)data;
value[1]=(u8)(data>>8);
value[2]=(u8)(data>>16);
value[3]=(u8)(data>>24);
if(saddr_len == 0)
saddr = 0;
else if(saddr_len == 0)
saddr &= 0xff;
/* prepare xfer_data struct */
req_data.dev_addr = dev_addr >> 1;
req_data.direction = 0;
req_data.saddr_len = saddr_len;
req_data.saddr_dat = saddr;
req_data.buf_size = data_len;
req_data.p_buffer = value;
/* usb send command */
status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], &req_data);
return status;
}
int cx231xx_reg_mask_write(struct cx231xx *dev, u8 dev_addr, u8 size, u16 register_address,
u8 bit_start,u8 bit_end, u32 value)
{
int status = 0;
u32 tmp;
u32 mask = 0;
int i;
if (bit_start>(size-1) || bit_end>(size-1)) {
return -1;
}
if (size==8){
status = cx231xx_read_i2c_data(dev, dev_addr, register_address, 2, &tmp, 1);
} else {
status = cx231xx_read_i2c_data(dev, dev_addr, register_address, 2, &tmp, 4);
}
if (status < 0) {
return status;
}
mask = 1<<bit_end;
for (i=bit_end; i>bit_start&&i>0; i--) {
mask = mask + (1<<(i-1));
}
value <<= bit_start;
if (size==8)
{
tmp &= ~mask;
tmp |= value;
tmp &= 0xff;
status = cx231xx_write_i2c_data(dev, dev_addr, register_address, 2, tmp, 1);
}
else
{
tmp &= ~mask;
tmp |= value;
status = cx231xx_write_i2c_data(dev, dev_addr, register_address, 2, tmp, 4);
}
return status;
}
int cx231xx_read_modify_write_i2c_dword(struct cx231xx *dev, u8 dev_addr,
u16 saddr, u32 mask, u32 value)
{
u32 temp;
int status = 0;
status = cx231xx_read_i2c_data(dev, dev_addr, saddr, 2, &temp, 4);
if(status < 0)
return status;
temp &= ~mask;
temp |= value;
status = cx231xx_write_i2c_data(dev, dev_addr, saddr, 2, temp, 4);
return status;
}
u32 cx231xx_set_field(u32 field_mask, u32 data)
{
u32 temp;
for (temp = field_mask; (temp & 1) == 0; temp >>= 1) {
data <<= 1;
}
return data;
}
/*
DVB device driver for cx231xx
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/usb.h>
#include "cx231xx.h"
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
#include "xc5000.h"
#include "dvb_dummy_fe.h"
MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
MODULE_LICENSE("GPL");
static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define dprintk(level, fmt, arg...) do { \
if (debug >= level) \
printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
} while (0)
#define CX231XX_DVB_NUM_BUFS 5
#define CX231XX_DVB_MAX_PACKETSIZE 564
#define CX231XX_DVB_MAX_PACKETS 64
struct cx231xx_dvb {
struct dvb_frontend *frontend;
/* feed count management */
struct mutex lock;
int nfeeds;
/* general boilerplate stuff */
struct dvb_adapter adapter;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend fe_hw;
struct dmx_frontend fe_mem;
struct dvb_net net;
};
static inline void print_err_status(struct cx231xx *dev,
int packet, int status)
{
char *errmsg = "Unknown";
switch (status) {
case -ENOENT:
errmsg = "unlinked synchronuously";
break;
case -ECONNRESET:
errmsg = "unlinked asynchronuously";
break;
case -ENOSR:
errmsg = "Buffer error (overrun)";
break;
case -EPIPE:
errmsg = "Stalled (device not responding)";
break;
case -EOVERFLOW:
errmsg = "Babble (bad cable?)";
break;
case -EPROTO:
errmsg = "Bit-stuff error (bad cable?)";
break;
case -EILSEQ:
errmsg = "CRC/Timeout (could be anything)";
break;
case -ETIME:
errmsg = "Device does not respond";
break;
}
if (packet < 0) {
dprintk(1, "URB status %d [%s].\n", status, errmsg);
} else {
dprintk(1, "URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb)
{
int i;
if (!dev)
return 0;
if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
return 0;
if (urb->status < 0) {
print_err_status(dev, -1, urb->status);
if (urb->status == -ENOENT)
return 0;
}
for (i = 0; i < urb->number_of_packets; i++) {
int status = urb->iso_frame_desc[i].status;
if (status < 0) {
print_err_status(dev, i, status);
if (urb->iso_frame_desc[i].status != -EPROTO)
continue;
}
dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer +
urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
}
return 0;
}
static int start_streaming(struct cx231xx_dvb *dvb)
{
int rc;
struct cx231xx *dev = dvb->adapter.priv;
usb_set_interface(dev->udev, 0, 1);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
return rc;
return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS,
CX231XX_DVB_NUM_BUFS, CX231XX_DVB_MAX_PACKETSIZE,
dvb_isoc_copy);
}
static int stop_streaming(struct cx231xx_dvb *dvb)
{
struct cx231xx *dev = dvb->adapter.priv;
cx231xx_uninit_isoc(dev);
cx231xx_set_mode(dev, CX231XX_SUSPEND);
return 0;
}
static int start_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct cx231xx_dvb *dvb = demux->priv;
int rc, ret;
if (!demux->dmx.frontend)
return -EINVAL;
mutex_lock(&dvb->lock);
dvb->nfeeds++;
rc = dvb->nfeeds;
if (dvb->nfeeds == 1) {
ret = start_streaming(dvb);
if (ret < 0)
rc = ret;
}
mutex_unlock(&dvb->lock);
return rc;
}
static int stop_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct cx231xx_dvb *dvb = demux->priv;
int err = 0;
mutex_lock(&dvb->lock);
dvb->nfeeds--;
if (0 == dvb->nfeeds)
err = stop_streaming(dvb);
mutex_unlock(&dvb->lock);
return err;
}
/* ------------------------------------------------------------------ */
static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
{
struct cx231xx *dev = fe->dvb->priv;
if (acquire)
return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
else
return cx231xx_set_mode(dev, CX231XX_SUSPEND);
}
/* ------------------------------------------------------------------ */
static struct xc5000_config cnxt_rde250_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 5380,
};
/* ------------------------------------------------------------------ */
#if 0
static int attach_xc5000(u8 addr, struct cx231xx *dev)
{
struct dvb_frontend *fe;
struct xc5000_config cfg;
memset(&cfg, 0, sizeof(cfg));
cfg.i2c_adap = &dev->i2c_bus[1].i2c_adap;
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
printk(KERN_ERR "%s/2: dvb frontend not attached. "
"Can't attach xc5000\n",
dev->name);
return -EINVAL;
}
fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc5000 attach failed\n", dev->name);
dvb_frontend_detach(dev->dvb->frontend);
dev->dvb->frontend = NULL;
return -EINVAL;
}
printk(KERN_INFO "%s/2: xc5000 attached\n", dev->name);
return 0;
}
#endif
int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq )
{
int status = 0;
if( (dev->dvb != NULL) && (dev->dvb->frontend != NULL) ){
struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
if(dops->set_analog_params != NULL) {
struct analog_parameters params;
params.frequency = freq;
params.std = dev->norm;
params.mode = 0 ; /* 0- Air; 1 - cable */
/*params.audmode = ; */
/* Set the analog parameters to set the frequency */
cx231xx_info("Setting Frequency for XC5000\n");
dops->set_analog_params(dev->dvb->frontend, &params);
}
}
return status;
}
int cx231xx_reset_analog_tuner(struct cx231xx *dev)
{
int status = 0;
if( (dev->dvb != NULL) && (dev->dvb->frontend != NULL) ){
struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
if(dops->init != NULL && !dev->xc_fw_load_done) {
cx231xx_info("Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if(status == 0 ) {
dev->xc_fw_load_done = 1;
cx231xx_info("XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
cx231xx_info("XC5000 firmware download failed !!!\n");
}
}
}
return status;
}
/* ------------------------------------------------------------------ */
static int register_dvb(struct cx231xx_dvb *dvb,
struct module *module,
struct cx231xx *dev,
struct device *device)
{
int result;
mutex_init(&dvb->lock);
/* register adapter */
result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
adapter_nr);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n",
dev->name, result);
goto fail_adapter;
}
/* Ensure all frontends negotiate bus access */
dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl;
dvb->adapter.priv = dev;
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_frontend;
}
/* register demux stuff */
dvb->demux.dmx.capabilities =
DMX_TS_FILTERING | DMX_SECTION_FILTERING |
DMX_MEMORY_BASED_FILTERING;
dvb->demux.priv = dvb;
dvb->demux.filternum = 256;
dvb->demux.feednum = 256;
dvb->demux.start_feed = start_feed;
dvb->demux.stop_feed = stop_feed;
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmx;
}
dvb->dmxdev.filternum = 256;
dvb->dmxdev.demux = &dvb->demux.dmx;
dvb->dmxdev.capabilities = 0;
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmxdev;
}
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
dev->name, result);
goto fail_fe_hw;
}
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
dev->name, result);
goto fail_fe_mem;
}
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_fe_conn;
}
/* register network adapter */
dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
return 0;
fail_fe_conn:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
fail_fe_mem:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
fail_fe_hw:
dvb_dmxdev_release(&dvb->dmxdev);
fail_dmxdev:
dvb_dmx_release(&dvb->demux);
fail_dmx:
dvb_unregister_frontend(dvb->frontend);
fail_frontend:
dvb_frontend_detach(dvb->frontend);
dvb_unregister_adapter(&dvb->adapter);
fail_adapter:
return result;
}
static void unregister_dvb(struct cx231xx_dvb *dvb)
{
dvb_net_release(&dvb->net);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
dvb_dmxdev_release(&dvb->dmxdev);
dvb_dmx_release(&dvb->demux);
dvb_unregister_frontend(dvb->frontend);
dvb_frontend_detach(dvb->frontend);
dvb_unregister_adapter(&dvb->adapter);
}
static int dvb_init(struct cx231xx *dev)
{
int result = 0;
struct cx231xx_dvb *dvb;
if (!dev->board.has_dvb) {
/* This device does not support the extension */
return 0;
}
dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
printk(KERN_INFO "cx231xx_dvb: memory allocation failed\n");
return -ENOMEM;
}
dev->dvb = dvb;
dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq;
dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner;
cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
/* init frontend */
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
/* dev->dvb->frontend = dvb_attach(s5h1411_attach,
&dvico_s5h1411_config,
&dev->i2c_bus[1].i2c_adap);*/
dev->dvb->frontend = dvb_attach(dvb_dummy_fe_ofdm_attach);
if(dev->dvb->frontend == NULL) {
printk(DRIVER_NAME ": Failed to attach dummy front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
if(dvb_attach(xc5000_attach, dev->dvb->frontend,
&dev->i2c_bus[1].i2c_adap,
&cnxt_rde250_tunerconfig) < 0) {
result = -EINVAL;
goto out_free;
}
break;
case CX231XX_BOARD_CNXT_RDU_250:
dev->dvb->frontend = dvb_attach(dvb_dummy_fe_ofdm_attach);
if(dev->dvb->frontend == NULL) {
printk(DRIVER_NAME ": Failed to attach dummy front end\n");
result = -EINVAL;
goto out_free;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = cx231xx_tuner_callback;
if(dvb_attach(xc5000_attach, dev->dvb->frontend,
&dev->i2c_bus[1].i2c_adap,
&cnxt_rde250_tunerconfig) < 0) {
result = -EINVAL;
goto out_free;
}
break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n",
dev->name);
break;
}
if (NULL == dvb->frontend) {
printk(KERN_ERR
"%s/2: frontend initialization failed\n",
dev->name);
result = -EINVAL;
goto out_free;
}
/* register everything */
result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
if (result < 0)
goto out_free;
cx231xx_set_mode(dev, CX231XX_SUSPEND);
printk(KERN_INFO "Successfully loaded cx231xx-dvb\n");
return 0;
out_free:
cx231xx_set_mode(dev, CX231XX_SUSPEND);
kfree(dvb);
dev->dvb = NULL;
return result;
}
static int dvb_fini(struct cx231xx *dev)
{
if (!dev->board.has_dvb) {
/* This device does not support the extension */
return 0;
}
if (dev->dvb) {
unregister_dvb(dev->dvb);
dev->dvb = NULL;
}
return 0;
}
static struct cx231xx_ops dvb_ops = {
.id = CX231XX_DVB,
.name = "Cx231xx dvb Extension",
.init = dvb_init,
.fini = dvb_fini,
};
static int __init cx231xx_dvb_register(void)
{
return cx231xx_register_extension(&dvb_ops);
}
static void __exit cx231xx_dvb_unregister(void)
{
cx231xx_unregister_extension(&dvb_ops);
}
module_init(cx231xx_dvb_register);
module_exit(cx231xx_dvb_unregister);
/*
cx231xx-i2c.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
Based on Cx23885 driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include "cx231xx.h"
/* ----------------------------------------------------------- */
static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
#define dprintk1(lvl, fmt, args...) \
do { \
if (i2c_debug >= lvl) { \
printk(fmt, ##args); \
} \
} while (0)
#define dprintk2(lvl, fmt, args...) \
do { \
if (i2c_debug >= lvl) { \
printk(KERN_DEBUG "%s at %s: " fmt, \
dev->name, __func__ , ##args); \
} \
} while (0)
/*
* cx231xx_i2c_send_bytes()
*/
int cx231xx_i2c_send_bytes(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
u16 size = 0;
u8 loop = 0;
u8 saddr_len = 1;
u8 *buf_ptr = NULL;
u16 saddr = 0;
u8 need_gpio = 0;
if( (bus->nr ==1) && (msg->addr == 0x61) && (dev->tuner_type == TUNER_XC5000) ) {
size = msg->len;
if( size == 2 ) { /* register write sub addr*/
/* Just writing sub address will cause problem to XC5000
So ignore the request */
return 0;
} else if( size == 4 ) { /* register write with sub addr*/
if(msg->len >= 2 )
saddr = msg->buf[0] << 8 | msg->buf[1];
else if ( msg->len == 1 )
saddr = msg->buf[0];
switch(saddr) {
case 0x0000: /* start tuner calibration mode */
need_gpio = 1;
dev->xc_fw_load_done = 1; /* FW Loading is done */
break;
case 0x000D: /* Set signal source */
case 0x0001: /* Set TV standard - Video */
case 0x0002: /* Set TV standard - Audio */
case 0x0003: /* Set RF Frequency */
need_gpio = 1;
break;
default:
if(dev->xc_fw_load_done)
need_gpio = 1;
break;
}
if(need_gpio ) {
dprintk1(1, " GPIO W R I T E : addr 0x%x, len %d, saddr 0x%x\n",
msg->addr, msg->len, saddr);
return dev->cx231xx_gpio_i2c_write(dev, msg->addr, msg->buf, msg->len);
}
}
/* special case for Xc5000 tuner case */
saddr_len = 1;
/* adjust the length to correct length */
size -= saddr_len;
buf_ptr = (u8*) (msg->buf + 1 );
do {
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = saddr_len;
req_data.saddr_dat = msg->buf[0];
req_data.buf_size = size > 16 ? 16: size;
req_data.p_buffer = (u8*)(buf_ptr + loop * 16);
bus->i2c_nostop = (size > 16) ? 1: 0;
bus->i2c_reserve = (loop == 0) ? 0: 1;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
loop++;
if( size >= 16 )
size -= 16;
else
size = 0;
}while( size > 0 );
bus->i2c_nostop = 0;
bus->i2c_reserve = 0;
} else { /* regular case */
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
req_data.buf_size = msg->len;
req_data.p_buffer = msg->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
}
return status < 0 ? status: 0;
}
/*
* cx231xx_i2c_recv_bytes()
* read a byte from the i2c device
*/
static int cx231xx_i2c_recv_bytes(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
u16 saddr = 0;
u8 need_gpio = 0;
if((bus->nr ==1) && (msg->addr == 0x61) && dev->tuner_type == TUNER_XC5000) {
if(msg->len == 2 )
saddr = msg->buf[0] << 8 | msg->buf[1];
else if ( msg->len == 1 )
saddr = msg->buf[0];
if( dev->xc_fw_load_done) {
switch(saddr) {
case 0x0009: /* BUSY check */
dprintk1(1, " GPIO R E A D : Special case BUSY check \n");
/* Try to read BUSY register, just set it to zero */
msg->buf[0] = 0;
if(msg->len == 2 )
msg->buf[1] = 0;
return 0;
case 0x0004: /* read Lock status */
need_gpio = 1;
break;
}
if(need_gpio) {
/* this is a special case to handle Xceive tuner clock stretch issue
with gpio based I2C interface */
dprintk1(1, " GPIO R E A D : addr 0x%x, len %d, saddr 0x%x\n",
msg->addr, msg->len, msg->buf[0] << 8| msg->buf[1]);
status = dev->cx231xx_gpio_i2c_write(dev, msg->addr, msg->buf, msg->len);
status = dev->cx231xx_gpio_i2c_read(dev, msg->addr, msg->buf, msg->len);
return status;
}
}
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = msg->len;
req_data.saddr_dat = msg->buf[0] << 8 | msg->buf[1];
req_data.buf_size = msg->len;
req_data.p_buffer = msg->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
} else {
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
req_data.buf_size = msg->len;
req_data.p_buffer = msg->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
}
return status < 0 ? status: 0;
}
/*
* cx231xx_i2c_recv_bytes_with_saddr()
* read a byte from the i2c device
*/
static int cx231xx_i2c_recv_bytes_with_saddr(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg1, const struct i2c_msg *msg2)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
u16 saddr = 0;
u8 need_gpio = 0;
if(msg1->len == 2 )
saddr = msg1->buf[0] << 8 | msg1->buf[1];
else if ( msg1->len == 1 )
saddr = msg1->buf[0];
if ( (bus->nr ==1) && (msg2->addr == 0x61) && dev->tuner_type == TUNER_XC5000) {
if( (msg2->len < 16) ) {
dprintk1(1, " i2c_read : addr 0x%x, len %d, subaddr 0x%x, leng %d\n",
msg2->addr, msg2->len, saddr, msg1->len);
switch(saddr) {
case 0x0008: /* read FW load status */
need_gpio = 1;
break;
case 0x0004: /* read Lock status */
need_gpio = 1;
break;
}
if(need_gpio ) {
status = dev->cx231xx_gpio_i2c_write(dev, msg1->addr, msg1->buf, msg1->len);
status = dev->cx231xx_gpio_i2c_read(dev, msg2->addr, msg2->buf, msg2->len);
return status;
}
}
}
/* prepare xfer_data struct */
req_data.dev_addr = msg2->addr;
req_data.direction = msg2->flags;
req_data.saddr_len = msg1->len;
req_data.saddr_dat = saddr;
req_data.buf_size = msg2->len;
req_data.p_buffer = msg2->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
return status < 0 ? status: 0;
}
/*
* cx231xx_i2c_check_for_device()
* check if there is a i2c_device at the supplied address
*/
static int cx231xx_i2c_check_for_device(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
req_data.buf_size = 0;
req_data.p_buffer = NULL;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
return status < 0 ? status: 0;
}
/*
* cx231xx_i2c_xfer()
* the main i2c transfer function
*/
static int cx231xx_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
int addr, rc, i, byte;
if (num <= 0)
return 0;
for (i = 0; i < num; i++) {
addr = msgs[i].addr >> 1;
dprintk2(2, "%s %s addr=%x len=%d:",
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
if (!msgs[i].len) { /* no len: check only for device presence */
rc = cx231xx_i2c_check_for_device(i2c_adap, &msgs[i]);
if (rc < 0) {
dprintk2(2, " no device\n");
return rc;
}
} else if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
rc = cx231xx_i2c_recv_bytes(i2c_adap, &msgs[i]);
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
msgs[i].addr == msgs[i + 1].addr && (msgs[i].len <= 2) && (bus->nr < 2)) {
/* read bytes */
rc = cx231xx_i2c_recv_bytes_with_saddr(i2c_adap, &msgs[i], &msgs[i+1]);
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
i++;
} else {
/* write bytes */
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
rc = cx231xx_i2c_send_bytes(i2c_adap,&msgs[i]);
}
if (rc < 0)
goto err;
if (i2c_debug >= 2)
printk("\n");
}
return num;
err:
dprintk2(2, " ERROR: %i\n", rc);
return rc;
}
/* ----------------------------------------------------------- */
/*
* functionality()
*/
static u32 functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
}
/*
* attach_inform()
* gets called when a device attaches to the i2c bus
* does some basic configuration
*/
static int attach_inform(struct i2c_client *client)
{
struct cx231xx_i2c *bus = i2c_get_adapdata(client->adapter);
struct cx231xx *dev = bus->dev;
switch (client->addr << 1) {
case 0x32:
dprintk1(1, "attach_inform: Geminit III detected.\n");
break;
case 0x02:
dprintk1(1, "attach_inform: Acquarius detected.\n");
break;
case 0xa0:
dprintk1(1, "attach_inform: eeprom detected.\n");
break;
case 0x60:
dprintk1(1, "attach_inform: Colibri detected.\n");
break;
case 0x8e:
{
struct IR_i2c *ir = i2c_get_clientdata(client);
dprintk1(1, "attach_inform: IR detected (%s).\n",
ir->phys);
cx231xx_set_ir(dev, ir);
break;
}
case 0x80:
case 0x88:
dprintk1(1, "attach_inform: Hammerhead detected.\n");
break;
default:
if (!dev->tuner_addr)
dev->tuner_addr = client->addr;
dprintk1(1, "attach inform: detected I2C address %x\n",
client->addr << 1);
}
return 0;
}
static int detach_inform(struct i2c_client *client)
{
dprintk1(1, "i2c detach [client=%s]\n", client->name);
return 0;
}
static struct i2c_algorithm cx231xx_algo = {
.master_xfer = cx231xx_i2c_xfer,
.functionality = functionality,
};
static struct i2c_adapter cx231xx_adap_template = {
.owner = THIS_MODULE,
.class = I2C_CLASS_TV_ANALOG,
.name = "cx231xx",
.id = I2C_HW_B_CX231XX,
.algo = &cx231xx_algo,
.client_register = attach_inform,
.client_unregister = detach_inform,
};
static struct i2c_client cx231xx_client_template = {
.name = "cx231xx internal",
};
/* ----------------------------------------------------------- */
/*
* i2c_devs
* incomplete list of known devices
*/
static char *i2c_devs[128] = {
[0x60 >> 1] = "colibri",
[0x88 >> 1] = "hammerhead",
[0x8e >> 1] = "CIR",
[0x32 >> 1] = "GeminiIII",
[0x02 >> 1] = "Aquarius",
[0xa0 >> 1] = "eeprom",
[0xc0 >> 1] = "tuner/XC3028",
[0xc2 >> 1] = "tuner/XC5000",
};
/*
* cx231xx_do_i2c_scan()
* check i2c address range for devices
*/
void cx231xx_do_i2c_scan(struct cx231xx *dev, struct i2c_client *c)
{
unsigned char buf;
int i, rc;
cx231xx_info(": Checking for I2C devices ..\n");
for (i = 0; i < 128; i++) {
c->addr = i;
rc = i2c_master_recv(c, &buf, 0);
if (rc < 0)
continue;
cx231xx_info("%s: i2c scan: found device @ 0x%x [%s]\n",
dev->name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
cx231xx_info(": Completed Checking for I2C devices.\n");
}
/*
* cx231xx_i2c_call_clients()
* send commands to all attached i2c devices
*/
void cx231xx_i2c_call_clients(struct cx231xx_i2c *bus, unsigned int cmd, void *arg)
{
/* struct cx231xx *dev = bus->dev; */
BUG_ON(NULL == bus->i2c_adap.algo_data);
i2c_clients_command(&bus->i2c_adap, cmd, arg);
}
/*
* cx231xx_i2c_register()
* register i2c bus
*/
int cx231xx_i2c_register(struct cx231xx_i2c *bus)
{
struct cx231xx *dev = bus->dev;
BUG_ON(!dev->cx231xx_send_usb_command);
cx231xx_info("%s(bus = %d)\n", __func__, bus->nr);
memcpy(&bus->i2c_adap, &cx231xx_adap_template,
sizeof(bus->i2c_adap));
memcpy(&bus->i2c_algo, &cx231xx_algo,
sizeof(bus->i2c_algo));
memcpy(&bus->i2c_client, &cx231xx_client_template,
sizeof(bus->i2c_client));
bus->i2c_adap.dev.parent = &dev->udev->dev;
strlcpy(bus->i2c_adap.name, bus->dev->name,
sizeof(bus->i2c_adap.name));
bus->i2c_algo.data = bus;
bus->i2c_adap.algo_data = bus;
i2c_set_adapdata(&bus->i2c_adap, bus);
i2c_add_adapter(&bus->i2c_adap);
bus->i2c_client.adapter = &bus->i2c_adap;
if (0 == bus->i2c_rc) {
cx231xx_info("%s: i2c bus %d registered\n", dev->name, bus->nr);
if (i2c_scan)
cx231xx_do_i2c_scan(dev, &bus->i2c_client);
} else
cx231xx_warn("%s: i2c bus %d register FAILED\n",
dev->name, bus->nr);
return bus->i2c_rc;
}
/*
* cx231xx_i2c_unregister()
* unregister i2c_bus
*/
int cx231xx_i2c_unregister(struct cx231xx_i2c *bus)
{
i2c_del_adapter(&bus->i2c_adap);
return 0;
}
/*
handle cx231xx IR remotes via linux kernel input layer.
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
< This is a place holder for IR now.>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/usb.h>
#include "cx231xx.h"
static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
#define i2cdprintk(fmt, arg...) \
if (ir_debug) { \
printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
}
#define dprintk(fmt, arg...) \
if (ir_debug) { \
printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
}
/**********************************************************
Polling structure used by cx231xx IR's
**********************************************************/
struct cx231xx_ir_poll_result {
unsigned int toggle_bit:1;
unsigned int read_count:7;
u8 rc_address;
u8 rc_data[4];
};
struct cx231xx_IR {
struct cx231xx *dev;
struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
/* poll external decoder */
int polling;
struct work_struct work;
struct timer_list timer;
unsigned int last_toggle:1;
unsigned int last_readcount;
unsigned int repeat_interval;
int (*get_key)(struct cx231xx_IR *, struct cx231xx_ir_poll_result *);
};
/**********************************************************
Polling code for cx231xx
**********************************************************/
static void cx231xx_ir_handle_key(struct cx231xx_IR *ir)
{
int result;
int do_sendkey = 0;
struct cx231xx_ir_poll_result poll_result;
/* read the registers containing the IR status */
result = ir->get_key(ir, &poll_result);
if (result < 0) {
dprintk("ir->get_key() failed %d\n", result);
return;
}
dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x\n",
poll_result.toggle_bit, poll_result.read_count,
ir->last_readcount, poll_result.rc_data[0]);
if (ir->dev->chip_id == CHIP_ID_EM2874) {
/* The em2874 clears the readcount field every time the
register is read. The em2860/2880 datasheet says that it
is supposed to clear the readcount, but it doesn't. So with
the em2874, we are looking for a non-zero read count as
opposed to a readcount that is incrementing */
ir->last_readcount = 0;
}
if (poll_result.read_count == 0) {
/* The button has not been pressed since the last read */
} else if (ir->last_toggle != poll_result.toggle_bit) {
/* A button has been pressed */
dprintk("button has been pressed\n");
ir->last_toggle = poll_result.toggle_bit;
ir->repeat_interval = 0;
do_sendkey = 1;
} else if (poll_result.toggle_bit == ir->last_toggle &&
poll_result.read_count > 0 &&
poll_result.read_count != ir->last_readcount) {
/* The button is still being held down */
dprintk("button being held down\n");
/* Debouncer for first keypress */
if (ir->repeat_interval++ > 9) {
/* Start repeating after 1 second */
do_sendkey = 1;
}
}
if (do_sendkey) {
dprintk("sending keypress\n");
ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0],
poll_result.rc_data[0]);
ir_input_nokey(ir->input, &ir->ir);
}
ir->last_readcount = poll_result.read_count;
return;
}
static void ir_timer(unsigned long data)
{
struct cx231xx_IR *ir = (struct cx231xx_IR *)data;
schedule_work(&ir->work);
}
static void cx231xx_ir_work(struct work_struct *work)
{
struct cx231xx_IR *ir = container_of(work, struct cx231xx_IR, work);
cx231xx_ir_handle_key(ir);
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
void cx231xx_ir_start(struct cx231xx_IR *ir)
{
setup_timer(&ir->timer, ir_timer, (unsigned long)ir);
INIT_WORK(&ir->work, cx231xx_ir_work);
schedule_work(&ir->work);
}
static void cx231xx_ir_stop(struct cx231xx_IR *ir)
{
del_timer_sync(&ir->timer);
flush_scheduled_work();
}
int cx231xx_ir_init(struct cx231xx *dev)
{
struct cx231xx_IR *ir;
struct input_dev *input_dev;
u8 ir_config;
int err = -ENOMEM;
if (dev->board.ir_codes == NULL) {
/* No remote control support */
return 0;
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev)
goto err_out_free;
ir->input = input_dev;
/* Setup the proper handler based on the chip */
switch (dev->chip_id) {
default:
printk("Unrecognized cx231xx chip id: IR not supported\n");
goto err_out_free;
}
/* This is how often we ask the chip for IR information */
ir->polling = 100; /* ms */
/* init input device */
snprintf(ir->name, sizeof(ir->name), "cx231xx IR (%s)",
dev->name);
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->board.ir_codes);
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_USB;
input_dev->id.version = 1;
input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
input_dev->dev.parent = &dev->udev->dev;
/* record handles to ourself */
ir->dev = dev;
dev->ir = ir;
cx231xx_ir_start(ir);
/* all done */
err = input_register_device(ir->input);
if (err)
goto err_out_stop;
return 0;
err_out_stop:
cx231xx_ir_stop(ir);
dev->ir = NULL;
err_out_free:
input_free_device(input_dev);
kfree(ir);
return err;
}
int cx231xx_ir_fini(struct cx231xx *dev)
{
struct cx231xx_IR *ir = dev->ir;
/* skip detach on non attached boards */
if (!ir)
return 0;
cx231xx_ir_stop(ir);
input_unregister_device(ir->input);
kfree(ir);
/* done */
dev->ir = NULL;
return 0;
}
/*
cx231xx-reg.h - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _CX231XX_REG_H
#define _CX231XX_REG_H
/*****************************************************************************
* VBI codes *
*****************************************************************************/
#define SAV_ACTIVE_VIDEO_FIELD1 0x80
#define EAV_ACTIVE_VIDEO_FIELD1 0x90
#define SAV_ACTIVE_VIDEO_FIELD2 0xC0
#define EAV_ACTIVE_VIDEO_FIELD2 0xD0
#define SAV_VBLANK_FIELD1 0xA0
#define EAV_VBLANK_FIELD1 0xB0
#define SAV_VBLANK_FIELD2 0xE0
#define EAV_VBLANK_FIELD2 0xF0
#define SAV_VBI_FIELD1 0x20
#define EAV_VBI_FIELD1 0x30
#define SAV_VBI_FIELD2 0x60
#define EAV_VBI_FIELD2 0x70
/*****************************************************************************/
/* Audio ADC Registers */
#define CH_PWR_CTRL1 0x0000000E
#define CH_PWR_CTRL2 0x0000000F
/*****************************************************************************/
#define HOST_REG1 0x000
#define FLD_FORCE_CHIP_SEL 0x80
#define FLD_AUTO_INC_DIS 0x20
#define FLD_PREFETCH_EN 0x10
/* Reserved [2:3] */
#define FLD_DIGITAL_PWR_DN 0x02
#define FLD_SLEEP 0x01
/*****************************************************************************/
#define HOST_REG2 0x001
/*****************************************************************************/
#define HOST_REG3 0x002
/*****************************************************************************/
/* added for polaris */
#define GPIO_PIN_CTL0 0x3
#define GPIO_PIN_CTL1 0x4
#define GPIO_PIN_CTL2 0x5
#define GPIO_PIN_CTL3 0x6
#define TS1_PIN_CTL0 0x7
#define TS1_PIN_CTL1 0x8
/*****************************************************************************/
#define FLD_CLK_IN_EN 0x80
#define FLD_XTAL_CTRL 0x70
#define FLD_BB_CLK_MODE 0x0C
#define FLD_REF_DIV_PLL 0x02
#define FLD_REF_SEL_PLL1 0x01
/*****************************************************************************/
#define CHIP_CTRL 0x100
/* Reserved [27] */
/* Reserved [31:21] */
#define FLD_CHIP_ACFG_DIS 0x00100000
/* Reserved [19] */
#define FLD_DUAL_MODE_ADC2 0x00040000
#define FLD_SIF_EN 0x00020000
#define FLD_SOFT_RST 0x00010000
#define FLD_DEVICE_ID 0x0000FFFF
/*****************************************************************************/
#define AFE_CTRL 0x104
#define AFE_CTRL_C2HH_SRC_CTRL 0x104
#define FLD_DIF_OUT_SEL 0xC0000000
#define FLD_AUX_PLL_CLK_ALT_SEL 0x3C000000
#define FLD_UV_ORDER_MODE 0x02000000
#define FLD_FUNC_MODE 0x01800000
#define FLD_ROT1_PHASE_CTL 0x007F8000
#define FLD_AUD_IN_SEL 0x00004000
#define FLD_LUMA_IN_SEL 0x00002000
#define FLD_CHROMA_IN_SEL 0x00001000
/* reserve [11:10] */
#define FLD_INV_SPEC_DIS 0x00000200
#define FLD_VGA_SEL_CH3 0x00000100
#define FLD_VGA_SEL_CH2 0x00000080
#define FLD_VGA_SEL_CH1 0x00000040
#define FLD_DCR_BYP_CH1 0x00000020
#define FLD_DCR_BYP_CH2 0x00000010
#define FLD_DCR_BYP_CH3 0x00000008
#define FLD_EN_12DB_CH3 0x00000004
#define FLD_EN_12DB_CH2 0x00000002
#define FLD_EN_12DB_CH1 0x00000001
/* redefine in Cx231xx */
/*****************************************************************************/
#define DC_CTRL1 0x108
/* reserve [31:30] */
#define FLD_CLAMP_LVL_CH1 0x3FFF8000
#define FLD_CLAMP_LVL_CH2 0x00007FFF
/*****************************************************************************/
/*****************************************************************************/
#define DC_CTRL2 0x10c
/* reserve [31:28] */
#define FLD_CLAMP_LVL_CH3 0x00FFFE00
#define FLD_CLAMP_WIND_LENTH 0x000001E0
#define FLD_C2HH_SAT_MIN 0x0000001E
#define FLD_FLT_BYP_SEL 0x00000001
/*****************************************************************************/
/*****************************************************************************/
#define DC_CTRL3 0x110
/* reserve [31:16] */
#define FLD_ERR_GAIN_CTL 0x00070000
#define FLD_LPF_MIN 0x0000FFFF
/*****************************************************************************/
/*****************************************************************************/
#define DC_CTRL4 0x114
/* reserve [31:31] */
#define FLD_INTG_CH1 0x7FFFFFFF
/*****************************************************************************/
/*****************************************************************************/
#define DC_CTRL5 0x118
/* reserve [31:31] */
#define FLD_INTG_CH2 0x7FFFFFFF
/*****************************************************************************/
/*****************************************************************************/
#define DC_CTRL6 0x11c
/* reserve [31:31] */
#define FLD_INTG_CH3 0x7FFFFFFF
/*****************************************************************************/
/*****************************************************************************/
#define PIN_CTRL 0x120
#define FLD_OEF_AGC_RF 0x00000001
#define FLD_OEF_AGC_IFVGA 0x00000002
#define FLD_OEF_AGC_IF 0x00000004
#define FLD_REG_BO_PUD 0x80000000
#define FLD_IR_IRQ_STAT 0x40000000
#define FLD_AUD_IRQ_STAT 0x20000000
#define FLD_VID_IRQ_STAT 0x10000000
/* Reserved [27:26] */
#define FLD_IRQ_N_OUT_EN 0x02000000
#define FLD_IRQ_N_POLAR 0x01000000
/* Reserved [23:6] */
#define FLD_OE_AUX_PLL_CLK 0x00000020
#define FLD_OE_I2S_BCLK 0x00000010
#define FLD_OE_I2S_WCLK 0x00000008
#define FLD_OE_AGC_IF 0x00000004
#define FLD_OE_AGC_IFVGA 0x00000002
#define FLD_OE_AGC_RF 0x00000001
/*****************************************************************************/
#define AUD_IO_CTRL 0x124
/* Reserved [31:8] */
#define FLD_I2S_PORT_DIR 0x00000080
#define FLD_I2S_OUT_SRC 0x00000040
#define FLD_AUD_CHAN3_SRC 0x00000030
#define FLD_AUD_CHAN2_SRC 0x0000000C
#define FLD_AUD_CHAN1_SRC 0x00000003
/*****************************************************************************/
#define AUD_LOCK1 0x128
#define FLD_AUD_LOCK_KI_SHIFT 0xC0000000
#define FLD_AUD_LOCK_KD_SHIFT 0x30000000
/* Reserved [27:25] */
#define FLD_EN_AV_LOCK 0x01000000
#define FLD_VID_COUNT 0x00FFFFFF
/*****************************************************************************/
#define AUD_LOCK2 0x12C
#define FLD_AUD_LOCK_KI_MULT 0xF0000000
#define FLD_AUD_LOCK_KD_MULT 0x0F000000
/* Reserved [23:22] */
#define FLD_AUD_LOCK_FREQ_SHIFT 0x00300000
#define FLD_AUD_COUNT 0x000FFFFF
/*****************************************************************************/
#define AFE_DIAG_CTRL1 0x134
/* Reserved [31:16] */
#define FLD_CUV_DLY_LENGTH 0x0000FF00
#define FLD_YC_DLY_LENGTH 0x000000FF
/*****************************************************************************/
/* Poalris redefine */
#define AFE_DIAG_CTRL3 0x138
/* Reserved [31:26] */
#define FLD_AUD_DUAL_FLAG_POL 0x02000000
#define FLD_VID_DUAL_FLAG_POL 0x01000000
/* Reserved [23:23] */
#define FLD_COL_CLAMP_DIS_CH1 0x00400000
#define FLD_COL_CLAMP_DIS_CH2 0x00200000
#define FLD_COL_CLAMP_DIS_CH3 0x00100000
#define TEST_CTRL1 0x144
/* Reserved [31:29] */
#define FLD_LBIST_EN 0x10000000
/* Reserved [27:10] */
#define FLD_FI_BIST_INTR_R 0x0000200
#define FLD_FI_BIST_INTR_L 0x0000100
#define FLD_BIST_FAIL_AUD_PLL 0x0000080
#define FLD_BIST_INTR_AUD_PLL 0x0000040
#define FLD_BIST_FAIL_VID_PLL 0x0000020
#define FLD_BIST_INTR_VID_PLL 0x0000010
/* Reserved [3:1] */
#define FLD_CIR_TEST_DIS 0x00000001
/*****************************************************************************/
#define TEST_CTRL2 0x148
#define FLD_TSXCLK_POL_CTL 0x80000000
#define FLD_ISO_CTL_SEL 0x40000000
#define FLD_ISO_CTL_EN 0x20000000
#define FLD_BIST_DEBUGZ 0x10000000
#define FLD_AUD_BIST_TEST_H 0x0F000000
/* Reserved [23:22] */
#define FLD_FLTRN_BIST_TEST_H 0x00020000
#define FLD_VID_BIST_TEST_H 0x00010000
/* Reserved [19:17] */
#define FLD_BIST_TEST_H 0x00010000
/* Reserved [15:13] */
#define FLD_TAB_EN 0x00001000
/* Reserved [11:0] */
/*****************************************************************************/
#define BIST_STAT 0x14C
#define FLD_AUD_BIST_FAIL_H 0xFFF00000
#define FLD_FLTRN_BIST_FAIL_H 0x00180000
#define FLD_VID_BIST_FAIL_H 0x00070000
#define FLD_AUD_BIST_TST_DONE 0x0000FFF0
#define FLD_FLTRN_BIST_TST_DONE 0x00000008
#define FLD_VID_BIST_TST_DONE 0x00000007
/*****************************************************************************/
/* DirectIF registers definition have been moved to DIF_reg.h */
/*****************************************************************************/
#define MODE_CTRL 0x400
#define FLD_AFD_PAL60_DIS 0x20000000
#define FLD_AFD_FORCE_SECAM 0x10000000
#define FLD_AFD_FORCE_PALNC 0x08000000
#define FLD_AFD_FORCE_PAL 0x04000000
#define FLD_AFD_PALM_SEL 0x03000000
#define FLD_CKILL_MODE 0x00300000
#define FLD_COMB_NOTCH_MODE 0x00c00000 /* bit[19:18] */
#define FLD_CLR_LOCK_STAT 0x00020000
#define FLD_FAST_LOCK_MD 0x00010000
#define FLD_WCEN 0x00008000
#define FLD_CAGCEN 0x00004000
#define FLD_CKILLEN 0x00002000
#define FLD_AUTO_SC_LOCK 0x00001000
#define FLD_MAN_SC_FAST_LOCK 0x00000800
#define FLD_INPUT_MODE 0x00000600
#define FLD_AFD_ACQUIRE 0x00000100
#define FLD_AFD_NTSC_SEL 0x00000080
#define FLD_AFD_PAL_SEL 0x00000040
#define FLD_ACFG_DIS 0x00000020
#define FLD_SQ_PIXEL 0x00000010
#define FLD_VID_FMT_SEL 0x0000000F
/*****************************************************************************/
#define OUT_CTRL1 0x404
#define FLD_POLAR 0x7F000000
/* Reserved [23] */
#define FLD_RND_MODE 0x00600000
#define FLD_VIPCLAMP_EN 0x00100000
#define FLD_VIPBLANK_EN 0x00080000
#define FLD_VIP_OPT_AL 0x00040000
#define FLD_IDID0_SOURCE 0x00020000
#define FLD_DCMODE 0x00010000
#define FLD_CLK_GATING 0x0000C000
#define FLD_CLK_INVERT 0x00002000
#define FLD_HSFMT 0x00001000
#define FLD_VALIDFMT 0x00000800
#define FLD_ACTFMT 0x00000400
#define FLD_SWAPRAW 0x00000200
#define FLD_CLAMPRAW_EN 0x00000100
#define FLD_BLUE_FIELD_EN 0x00000080
#define FLD_BLUE_FIELD_ACT 0x00000040
#define FLD_TASKBIT_VAL 0x00000020
#define FLD_ANC_DATA_EN 0x00000010
#define FLD_VBIHACTRAW_EN 0x00000008
#define FLD_MODE10B 0x00000004
#define FLD_OUT_MODE 0x00000003
/*****************************************************************************/
#define OUT_CTRL2 0x408
#define FLD_AUD_GRP 0xC0000000
#define FLD_SAMPLE_RATE 0x30000000
#define FLD_AUD_ANC_EN 0x08000000
#define FLD_EN_C 0x04000000
#define FLD_EN_B 0x02000000
#define FLD_EN_A 0x01000000
/* Reserved [23:20] */
#define FLD_IDID1_LSB 0x000C0000
#define FLD_IDID0_LSB 0x00030000
#define FLD_IDID1_MSB 0x0000FF00
#define FLD_IDID0_MSB 0x000000FF
/*****************************************************************************/
#define GEN_STAT 0x40C
#define FLD_VCR_DETECT 0x00800000
#define FLD_SPECIAL_PLAY_N 0x00400000
#define FLD_VPRES 0x00200000
#define FLD_AGC_LOCK 0x00100000
#define FLD_CSC_LOCK 0x00080000
#define FLD_VLOCK 0x00040000
#define FLD_SRC_LOCK 0x00020000
#define FLD_HLOCK 0x00010000
#define FLD_VSYNC_N 0x00008000
#define FLD_SRC_FIFO_UFLOW 0x00004000
#define FLD_SRC_FIFO_OFLOW 0x00002000
#define FLD_FIELD 0x00001000
#define FLD_AFD_FMT_STAT 0x00000F00
#define FLD_MV_TYPE2_PAIR 0x00000080
#define FLD_MV_T3CS 0x00000040
#define FLD_MV_CS 0x00000020
#define FLD_MV_PSP 0x00000010
/* Reserved [3] */
#define FLD_MV_CDAT 0x00000003
/*****************************************************************************/
#define INT_STAT_MASK 0x410
#define FLD_COMB_3D_FIFO_MSK 0x80000000
#define FLD_WSS_DAT_AVAIL_MSK 0x40000000
#define FLD_GS2_DAT_AVAIL_MSK 0x20000000
#define FLD_GS1_DAT_AVAIL_MSK 0x10000000
#define FLD_CC_DAT_AVAIL_MSK 0x08000000
#define FLD_VPRES_CHANGE_MSK 0x04000000
#define FLD_MV_CHANGE_MSK 0x02000000
#define FLD_END_VBI_EVEN_MSK 0x01000000
#define FLD_END_VBI_ODD_MSK 0x00800000
#define FLD_FMT_CHANGE_MSK 0x00400000
#define FLD_VSYNC_TRAIL_MSK 0x00200000
#define FLD_HLOCK_CHANGE_MSK 0x00100000
#define FLD_VLOCK_CHANGE_MSK 0x00080000
#define FLD_CSC_LOCK_CHANGE_MSK 0x00040000
#define FLD_SRC_FIFO_UFLOW_MSK 0x00020000
#define FLD_SRC_FIFO_OFLOW_MSK 0x00010000
#define FLD_COMB_3D_FIFO_STAT 0x00008000
#define FLD_WSS_DAT_AVAIL_STAT 0x00004000
#define FLD_GS2_DAT_AVAIL_STAT 0x00002000
#define FLD_GS1_DAT_AVAIL_STAT 0x00001000
#define FLD_CC_DAT_AVAIL_STAT 0x00000800
#define FLD_VPRES_CHANGE_STAT 0x00000400
#define FLD_MV_CHANGE_STAT 0x00000200
#define FLD_END_VBI_EVEN_STAT 0x00000100
#define FLD_END_VBI_ODD_STAT 0x00000080
#define FLD_FMT_CHANGE_STAT 0x00000040
#define FLD_VSYNC_TRAIL_STAT 0x00000020
#define FLD_HLOCK_CHANGE_STAT 0x00000010
#define FLD_VLOCK_CHANGE_STAT 0x00000008
#define FLD_CSC_LOCK_CHANGE_STAT 0x00000004
#define FLD_SRC_FIFO_UFLOW_STAT 0x00000002
#define FLD_SRC_FIFO_OFLOW_STAT 0x00000001
/*****************************************************************************/
#define LUMA_CTRL 0x414
#define BRIGHTNESS_CTRL_BYTE 0x414
#define CONTRAST_CTRL_BYTE 0x415
#define LUMA_CTRL_BYTE_3 0x416
#define FLD_LUMA_CORE_SEL 0x00C00000
#define FLD_RANGE 0x00300000
/* Reserved [19] */
#define FLD_PEAK_EN 0x00040000
#define FLD_PEAK_SEL 0x00030000
#define FLD_CNTRST 0x0000FF00
#define FLD_BRITE 0x000000FF
/*****************************************************************************/
#define HSCALE_CTRL 0x418
#define FLD_HFILT 0x03000000
#define FLD_HSCALE 0x00FFFFFF
/*****************************************************************************/
#define VSCALE_CTRL 0x41C
#define FLD_LINE_AVG_DIS 0x01000000
/* Reserved [23:20] */
#define FLD_VS_INTRLACE 0x00080000
#define FLD_VFILT 0x00070000
/* Reserved [15:13] */
#define FLD_VSCALE 0x00001FFF
/*****************************************************************************/
#define CHROMA_CTRL 0x420
#define USAT_CTRL_BYTE 0x420
#define VSAT_CTRL_BYTE 0x421
#define HUE_CTRL_BYTE 0x422
#define FLD_C_LPF_EN 0x20000000
#define FLD_CHR_DELAY 0x1C000000
#define FLD_C_CORE_SEL 0x03000000
#define FLD_HUE 0x00FF0000
#define FLD_VSAT 0x0000FF00
#define FLD_USAT 0x000000FF
/*****************************************************************************/
#define VBI_LINE_CTRL1 0x424
#define FLD_VBI_MD_LINE4 0xFF000000
#define FLD_VBI_MD_LINE3 0x00FF0000
#define FLD_VBI_MD_LINE2 0x0000FF00
#define FLD_VBI_MD_LINE1 0x000000FF
/*****************************************************************************/
#define VBI_LINE_CTRL2 0x428
#define FLD_VBI_MD_LINE8 0xFF000000
#define FLD_VBI_MD_LINE7 0x00FF0000
#define FLD_VBI_MD_LINE6 0x0000FF00
#define FLD_VBI_MD_LINE5 0x000000FF
/*****************************************************************************/
#define VBI_LINE_CTRL3 0x42C
#define FLD_VBI_MD_LINE12 0xFF000000
#define FLD_VBI_MD_LINE11 0x00FF0000
#define FLD_VBI_MD_LINE10 0x0000FF00
#define FLD_VBI_MD_LINE9 0x000000FF
/*****************************************************************************/
#define VBI_LINE_CTRL4 0x430
#define FLD_VBI_MD_LINE16 0xFF000000
#define FLD_VBI_MD_LINE15 0x00FF0000
#define FLD_VBI_MD_LINE14 0x0000FF00
#define FLD_VBI_MD_LINE13 0x000000FF
/*****************************************************************************/
#define VBI_LINE_CTRL5 0x434
#define FLD_VBI_MD_LINE17 0x000000FF
/*****************************************************************************/
#define VBI_FC_CFG 0x438
#define FLD_FC_ALT2 0xFF000000
#define FLD_FC_ALT1 0x00FF0000
#define FLD_FC_ALT2_TYPE 0x0000F000
#define FLD_FC_ALT1_TYPE 0x00000F00
/* Reserved [7:1] */
#define FLD_FC_SEARCH_MODE 0x00000001
/*****************************************************************************/
#define VBI_MISC_CFG1 0x43C
#define FLD_TTX_PKTADRU 0xFFF00000
#define FLD_TTX_PKTADRL 0x000FFF00
/* Reserved [7:6] */
#define FLD_MOJI_PACK_DIS 0x00000020
#define FLD_VPS_DEC_DIS 0x00000010
#define FLD_CRI_MARG_SCALE 0x0000000C
#define FLD_EDGE_RESYNC_EN 0x00000002
#define FLD_ADAPT_SLICE_DIS 0x00000001
/*****************************************************************************/
#define VBI_MISC_CFG2 0x440
#define FLD_HAMMING_TYPE 0x0F000000
/* Reserved [23:20] */
#define FLD_WSS_FIFO_RST 0x00080000
#define FLD_GS2_FIFO_RST 0x00040000
#define FLD_GS1_FIFO_RST 0x00020000
#define FLD_CC_FIFO_RST 0x00010000
/* Reserved [15:12] */
#define FLD_VBI3_SDID 0x00000F00
#define FLD_VBI2_SDID 0x000000F0
#define FLD_VBI1_SDID 0x0000000F
/*****************************************************************************/
#define VBI_PAY1 0x444
#define FLD_GS1_FIFO_DAT 0xFF000000
#define FLD_GS1_STAT 0x00FF0000
#define FLD_CC_FIFO_DAT 0x0000FF00
#define FLD_CC_STAT 0x000000FF
/*****************************************************************************/
#define VBI_PAY2 0x448
#define FLD_WSS_FIFO_DAT 0xFF000000
#define FLD_WSS_STAT 0x00FF0000
#define FLD_GS2_FIFO_DAT 0x0000FF00
#define FLD_GS2_STAT 0x000000FF
/*****************************************************************************/
#define VBI_CUST1_CFG1 0x44C
/* Reserved [31] */
#define FLD_VBI1_CRIWIN 0x7F000000
#define FLD_VBI1_SLICE_DIST 0x00F00000
#define FLD_VBI1_BITINC 0x000FFF00
#define FLD_VBI1_HDELAY 0x000000FF
/*****************************************************************************/
#define VBI_CUST1_CFG2 0x450
#define FLD_VBI1_FC_LENGTH 0x1F000000
#define FLD_VBI1_FRAME_CODE 0x00FFFFFF
/*****************************************************************************/
#define VBI_CUST1_CFG3 0x454
#define FLD_VBI1_HAM_EN 0x80000000
#define FLD_VBI1_FIFO_MODE 0x70000000
#define FLD_VBI1_FORMAT_TYPE 0x0F000000
#define FLD_VBI1_PAYLD_LENGTH 0x00FF0000
#define FLD_VBI1_CRI_LENGTH 0x0000F000
#define FLD_VBI1_CRI_MARGIN 0x00000F00
#define FLD_VBI1_CRI_TIME 0x000000FF
/*****************************************************************************/
#define VBI_CUST2_CFG1 0x458
/* Reserved [31] */
#define FLD_VBI2_CRIWIN 0x7F000000
#define FLD_VBI2_SLICE_DIST 0x00F00000
#define FLD_VBI2_BITINC 0x000FFF00
#define FLD_VBI2_HDELAY 0x000000FF
/*****************************************************************************/
#define VBI_CUST2_CFG2 0x45C
#define FLD_VBI2_FC_LENGTH 0x1F000000
#define FLD_VBI2_FRAME_CODE 0x00FFFFFF
/*****************************************************************************/
#define VBI_CUST2_CFG3 0x460
#define FLD_VBI2_HAM_EN 0x80000000
#define FLD_VBI2_FIFO_MODE 0x70000000
#define FLD_VBI2_FORMAT_TYPE 0x0F000000
#define FLD_VBI2_PAYLD_LENGTH 0x00FF0000
#define FLD_VBI2_CRI_LENGTH 0x0000F000
#define FLD_VBI2_CRI_MARGIN 0x00000F00
#define FLD_VBI2_CRI_TIME 0x000000FF
/*****************************************************************************/
#define VBI_CUST3_CFG1 0x464
/* Reserved [31] */
#define FLD_VBI3_CRIWIN 0x7F000000
#define FLD_VBI3_SLICE_DIST 0x00F00000
#define FLD_VBI3_BITINC 0x000FFF00
#define FLD_VBI3_HDELAY 0x000000FF
/*****************************************************************************/
#define VBI_CUST3_CFG2 0x468
#define FLD_VBI3_FC_LENGTH 0x1F000000
#define FLD_VBI3_FRAME_CODE 0x00FFFFFF
/*****************************************************************************/
#define VBI_CUST3_CFG3 0x46C
#define FLD_VBI3_HAM_EN 0x80000000
#define FLD_VBI3_FIFO_MODE 0x70000000
#define FLD_VBI3_FORMAT_TYPE 0x0F000000
#define FLD_VBI3_PAYLD_LENGTH 0x00FF0000
#define FLD_VBI3_CRI_LENGTH 0x0000F000
#define FLD_VBI3_CRI_MARGIN 0x00000F00
#define FLD_VBI3_CRI_TIME 0x000000FF
/*****************************************************************************/
#define HORIZ_TIM_CTRL 0x470
#define FLD_BGDEL_CNT 0xFF000000
/* Reserved [23:22] */
#define FLD_HACTIVE_CNT 0x003FF000
/* Reserved [11:10] */
#define FLD_HBLANK_CNT 0x000003FF
/*****************************************************************************/
#define VERT_TIM_CTRL 0x474
#define FLD_V656BLANK_CNT 0xFF000000
/* Reserved [23:22] */
#define FLD_VACTIVE_CNT 0x003FF000
/* Reserved [11:10] */
#define FLD_VBLANK_CNT 0x000003FF
/*****************************************************************************/
#define SRC_COMB_CFG 0x478
#define FLD_CCOMB_2LN_CHECK 0x80000000
#define FLD_CCOMB_3LN_EN 0x40000000
#define FLD_CCOMB_2LN_EN 0x20000000
#define FLD_CCOMB_3D_EN 0x10000000
/* Reserved [27] */
#define FLD_LCOMB_3LN_EN 0x04000000
#define FLD_LCOMB_2LN_EN 0x02000000
#define FLD_LCOMB_3D_EN 0x01000000
#define FLD_LUMA_LPF_SEL 0x00C00000
#define FLD_UV_LPF_SEL 0x00300000
#define FLD_BLEND_SLOPE 0x000F0000
#define FLD_CCOMB_REDUCE_EN 0x00008000
/* Reserved [14:10] */
#define FLD_SRC_DECIM_RATIO 0x000003FF
/*****************************************************************************/
#define CHROMA_VBIOFF_CFG 0x47C
#define FLD_VBI_VOFFSET 0x1F000000
/* Reserved [23:20] */
#define FLD_SC_STEP 0x000FFFFF
/*****************************************************************************/
#define FIELD_COUNT 0x480
#define FLD_FIELD_COUNT_FLD 0x000003FF
/*****************************************************************************/
#define MISC_TIM_CTRL 0x484
#define FLD_DEBOUNCE_COUNT 0xC0000000
#define FLD_VT_LINE_CNT_HYST 0x30000000
/* Reserved [27] */
#define FLD_AFD_STAT 0x07FF0000
#define FLD_VPRES_VERT_EN 0x00008000
/* Reserved [14:12] */
#define FLD_HR32 0x00000800
#define FLD_TDALGN 0x00000400
#define FLD_TDFIELD 0x00000200
/* Reserved [8:6] */
#define FLD_TEMPDEC 0x0000003F
/*****************************************************************************/
#define DFE_CTRL1 0x488
#define FLD_CLAMP_AUTO_EN 0x80000000
#define FLD_AGC_AUTO_EN 0x40000000
#define FLD_VGA_CRUSH_EN 0x20000000
#define FLD_VGA_AUTO_EN 0x10000000
#define FLD_VBI_GATE_EN 0x08000000
#define FLD_CLAMP_LEVEL 0x07000000
/* Reserved [23:22] */
#define FLD_CLAMP_SKIP_CNT 0x00300000
#define FLD_AGC_GAIN 0x000FFF00
/* Reserved [7:6] */
#define FLD_VGA_GAIN 0x0000003F
/*****************************************************************************/
#define DFE_CTRL2 0x48C
#define FLD_VGA_ACQUIRE_RANGE 0x00FF0000
#define FLD_VGA_TRACK_RANGE 0x0000FF00
#define FLD_VGA_SYNC 0x000000FF
/*****************************************************************************/
#define DFE_CTRL3 0x490
#define FLD_BP_PERCENT 0xFF000000
#define FLD_DFT_THRESHOLD 0x00FF0000
/* Reserved [15:12] */
#define FLD_SYNC_WIDTH_SEL 0x00000600
#define FLD_BP_LOOP_GAIN 0x00000300
#define FLD_SYNC_LOOP_GAIN 0x000000C0
/* Reserved [5:4] */
#define FLD_AGC_LOOP_GAIN 0x0000000C
#define FLD_DCC_LOOP_GAIN 0x00000003
/*****************************************************************************/
#define PLL_CTRL 0x494
#define FLD_PLL_KD 0xFF000000
#define FLD_PLL_KI 0x00FF0000
#define FLD_PLL_MAX_OFFSET 0x0000FFFF
/*****************************************************************************/
#define HTL_CTRL 0x498
/* Reserved [31:24] */
#define FLD_AUTO_LOCK_SPD 0x00080000
#define FLD_MAN_FAST_LOCK 0x00040000
#define FLD_HTL_15K_EN 0x00020000
#define FLD_HTL_500K_EN 0x00010000
#define FLD_HTL_KD 0x0000FF00
#define FLD_HTL_KI 0x000000FF
/*****************************************************************************/
#define COMB_CTRL 0x49C
#define FLD_COMB_PHASE_LIMIT 0xFF000000
#define FLD_CCOMB_ERR_LIMIT 0x00FF0000
#define FLD_LUMA_THRESHOLD 0x0000FF00
#define FLD_LCOMB_ERR_LIMIT 0x000000FF
/*****************************************************************************/
#define CRUSH_CTRL 0x4A0
#define FLD_WTW_EN 0x00400000
#define FLD_CRUSH_FREQ 0x00200000
#define FLD_MAJ_SEL_EN 0x00100000
#define FLD_MAJ_SEL 0x000C0000
/* Reserved [17:15] */
#define FLD_SYNC_TIP_REDUCE 0x00007E00
/* Reserved [8:6] */
#define FLD_SYNC_TIP_INC 0x0000003F
/*****************************************************************************/
#define SOFT_RST_CTRL 0x4A4
#define FLD_VD_SOFT_RST 0x00008000
/* Reserved [14:12] */
#define FLD_REG_RST_MSK 0x00000800
#define FLD_VOF_RST_MSK 0x00000400
#define FLD_MVDET_RST_MSK 0x00000200
#define FLD_VBI_RST_MSK 0x00000100
#define FLD_SCALE_RST_MSK 0x00000080
#define FLD_CHROMA_RST_MSK 0x00000040
#define FLD_LUMA_RST_MSK 0x00000020
#define FLD_VTG_RST_MSK 0x00000010
#define FLD_YCSEP_RST_MSK 0x00000008
#define FLD_SRC_RST_MSK 0x00000004
#define FLD_DFE_RST_MSK 0x00000002
/* Reserved [0] */
/*****************************************************************************/
#define MV_DT_CTRL1 0x4A8
/* Reserved [31:29] */
#define FLD_PSP_STOP_LINE 0x1F000000
/* Reserved [23:21] */
#define FLD_PSP_STRT_LINE 0x001F0000
/* Reserved [15] */
#define FLD_PSP_LLIMW 0x00007F00
/* Reserved [7] */
#define FLD_PSP_ULIMW 0x0000007F
/*****************************************************************************/
#define MV_DT_CTRL2 0x4AC
#define FLD_CS_STOPWIN 0xFF000000
#define FLD_CS_STRTWIN 0x00FF0000
#define FLD_CS_WIDTH 0x0000FF00
#define FLD_PSP_SPEC_VAL 0x000000FF
/*****************************************************************************/
#define MV_DT_CTRL3 0x4B0
#define FLD_AUTO_RATE_DIS 0x80000000
#define FLD_HLOCK_DIS 0x40000000
#define FLD_SEL_FIELD_CNT 0x20000000
#define FLD_CS_TYPE2_SEL 0x10000000
#define FLD_CS_LINE_THRSH_SEL 0x08000000
#define FLD_CS_ATHRESH_SEL 0x04000000
#define FLD_PSP_SPEC_SEL 0x02000000
#define FLD_PSP_LINES_SEL 0x01000000
#define FLD_FIELD_CNT 0x00F00000
#define FLD_CS_TYPE2_CNT 0x000FC000
#define FLD_CS_LINE_CNT 0x00003F00
#define FLD_CS_ATHRESH_LEV 0x000000FF
/*****************************************************************************/
#define CHIP_VERSION 0x4B4
/* Cx231xx redefine */
#define VERSION 0x4B4
#define FLD_REV_ID 0x000000FF
/*****************************************************************************/
#define MISC_DIAG_CTRL 0x4B8
/* Reserved [31:24] */
#define FLD_SC_CONVERGE_THRESH 0x00FF0000
#define FLD_CCOMB_ERR_LIMIT_3D 0x0000FF00
#define FLD_LCOMB_ERR_LIMIT_3D 0x000000FF
/*****************************************************************************/
#define VBI_PASS_CTRL 0x4BC
#define FLD_VBI_PASS_MD 0x00200000
#define FLD_VBI_SETUP_DIS 0x00100000
#define FLD_PASS_LINE_CTRL 0x000FFFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define VCR_DET_CTRL 0x4c0
#define FLD_EN_FIELD_PHASE_DET 0x80000000
#define FLD_EN_HEAD_SW_DET 0x40000000
#define FLD_FIELD_PHASE_LENGTH 0x01FF0000
/* Reserved [29:25] */
#define FLD_FIELD_PHASE_DELAY 0x0000FF00
#define FLD_FIELD_PHASE_LIMIT 0x000000F0
#define FLD_HEAD_SW_DET_LIMIT 0x0000000F
/*****************************************************************************/
#define DL_CTL 0x800
#define DL_CTL_ADDRESS_LOW 0x800 /* Byte 1 in DL_CTL */
#define DL_CTL_ADDRESS_HIGH 0x801 /* Byte 2 in DL_CTL */
#define DL_CTL_DATA 0x802 /* Byte 3 in DL_CTL */
#define DL_CTL_CONTROL 0x803 /* Byte 4 in DL_CTL */
/* Reserved [31:5] */
#define FLD_START_8051 0x10000000
#define FLD_DL_ENABLE 0x08000000
#define FLD_DL_AUTO_INC 0x04000000
#define FLD_DL_MAP 0x03000000
/*****************************************************************************/
#define STD_DET_STATUS 0x804
#define FLD_SPARE_STATUS1 0xFF000000
#define FLD_SPARE_STATUS0 0x00FF0000
#define FLD_MOD_DET_STATUS1 0x0000FF00
#define FLD_MOD_DET_STATUS0 0x000000FF
/*****************************************************************************/
#define AUD_BUILD_NUM 0x806
#define AUD_VER_NUM 0x807
#define STD_DET_CTL 0x808
#define STD_DET_CTL_AUD_CTL 0x808 /* Byte 1 in STD_DET_CTL */
#define STD_DET_CTL_PREF_MODE 0x809 /* Byte 2 in STD_DET_CTL */
#define FLD_SPARE_CTL0 0xFF000000
#define FLD_DIS_DBX 0x00800000
#define FLD_DIS_BTSC 0x00400000
#define FLD_DIS_NICAM_A2 0x00200000
#define FLD_VIDEO_PRESENT 0x00100000
#define FLD_DW8051_VIDEO_FORMAT 0x000F0000
#define FLD_PREF_DEC_MODE 0x0000FF00
#define FLD_AUD_CONFIG 0x000000FF
/*****************************************************************************/
#define DW8051_INT 0x80C
#define FLD_VIDEO_PRESENT_CHANGE 0x80000000
#define FLD_VIDEO_CHANGE 0x40000000
#define FLD_RDS_READY 0x20000000
#define FLD_AC97_INT 0x10000000
#define FLD_NICAM_BIT_ERROR_TOO_HIGH 0x08000000
#define FLD_NICAM_LOCK 0x04000000
#define FLD_NICAM_UNLOCK 0x02000000
#define FLD_DFT4_TH_CMP 0x01000000
/* Reserved [23:22] */
#define FLD_LOCK_IND_INT 0x00200000
#define FLD_DFT3_TH_CMP 0x00100000
#define FLD_DFT2_TH_CMP 0x00080000
#define FLD_DFT1_TH_CMP 0x00040000
#define FLD_FM2_DFT_TH_CMP 0x00020000
#define FLD_FM1_DFT_TH_CMP 0x00010000
#define FLD_VIDEO_PRESENT_EN 0x00008000
#define FLD_VIDEO_CHANGE_EN 0x00004000
#define FLD_RDS_READY_EN 0x00002000
#define FLD_AC97_INT_EN 0x00001000
#define FLD_NICAM_BIT_ERROR_TOO_HIGH_EN 0x00000800
#define FLD_NICAM_LOCK_EN 0x00000400
#define FLD_NICAM_UNLOCK_EN 0x00000200
#define FLD_DFT4_TH_CMP_EN 0x00000100
/* Reserved [7] */
#define FLD_DW8051_INT6_CTL1 0x00000040
#define FLD_DW8051_INT5_CTL1 0x00000020
#define FLD_DW8051_INT4_CTL1 0x00000010
#define FLD_DW8051_INT3_CTL1 0x00000008
#define FLD_DW8051_INT2_CTL1 0x00000004
#define FLD_DW8051_INT1_CTL1 0x00000002
#define FLD_DW8051_INT0_CTL1 0x00000001
/*****************************************************************************/
#define GENERAL_CTL 0x810
#define FLD_RDS_INT 0x80000000
#define FLD_NBER_INT 0x40000000
#define FLD_NLL_INT 0x20000000
#define FLD_IFL_INT 0x10000000
#define FLD_FDL_INT 0x08000000
#define FLD_AFC_INT 0x04000000
#define FLD_AMC_INT 0x02000000
#define FLD_AC97_INT_CTL 0x01000000
#define FLD_RDS_INT_DIS 0x00800000
#define FLD_NBER_INT_DIS 0x00400000
#define FLD_NLL_INT_DIS 0x00200000
#define FLD_IFL_INT_DIS 0x00100000
#define FLD_FDL_INT_DIS 0x00080000
#define FLD_FC_INT_DIS 0x00040000
#define FLD_AMC_INT_DIS 0x00020000
#define FLD_AC97_INT_DIS 0x00010000
#define FLD_REV_NUM 0x0000FF00
/* Reserved [7:5] */
#define FLD_DBX_SOFT_RESET_REG 0x00000010
#define FLD_AD_SOFT_RESET_REG 0x00000008
#define FLD_SRC_SOFT_RESET_REG 0x00000004
#define FLD_CDMOD_SOFT_RESET 0x00000002
#define FLD_8051_SOFT_RESET 0x00000001
/*****************************************************************************/
#define AAGC_CTL 0x814
#define FLD_AFE_12DB_EN 0x80000000
#define FLD_AAGC_DEFAULT_EN 0x40000000
#define FLD_AAGC_DEFAULT 0x3F000000
/* Reserved [23] */
#define FLD_AAGC_GAIN 0x00600000
#define FLD_AAGC_TH 0x001F0000
/* Reserved [15:14] */
#define FLD_AAGC_HYST2 0x00003F00
/* Reserved [7:6] */
#define FLD_AAGC_HYST1 0x0000003F
/*****************************************************************************/
#define IF_SRC_CTL 0x818
#define FLD_DBX_BYPASS 0x80000000
/* Reserved [30:25] */
#define FLD_IF_SRC_MODE 0x01000000
/* Reserved [23:18] */
#define FLD_IF_SRC_PHASE_INC 0x0001FFFF
/*****************************************************************************/
#define ANALOG_DEMOD_CTL 0x81C
#define FLD_ROT1_PHACC_PROG 0xFFFF0000
/* Reserved [15] */
#define FLD_FM1_DELAY_FIX 0x00007000
#define FLD_PDF4_SHIFT 0x00000C00
#define FLD_PDF3_SHIFT 0x00000300
#define FLD_PDF2_SHIFT 0x000000C0
#define FLD_PDF1_SHIFT 0x00000030
#define FLD_FMBYPASS_MODE2 0x00000008
#define FLD_FMBYPASS_MODE1 0x00000004
#define FLD_NICAM_MODE 0x00000002
#define FLD_BTSC_FMRADIO_MODE 0x00000001
/*****************************************************************************/
#define ROT_FREQ_CTL 0x820
#define FLD_ROT3_PHACC_PROG 0xFFFF0000
#define FLD_ROT2_PHACC_PROG 0x0000FFFF
/*****************************************************************************/
#define FM_CTL 0x824
#define FLD_FM2_DC_FB_SHIFT 0xF0000000
#define FLD_FM2_DC_INT_SHIFT 0x0F000000
#define FLD_FM2_AFC_RESET 0x00800000
#define FLD_FM2_DC_PASS_IN 0x00400000
#define FLD_FM2_DAGC_SHIFT 0x00380000
#define FLD_FM2_CORDIC_SHIFT 0x00070000
#define FLD_FM1_DC_FB_SHIFT 0x0000F000
#define FLD_FM1_DC_INT_SHIFT 0x00000F00
#define FLD_FM1_AFC_RESET 0x00000080
#define FLD_FM1_DC_PASS_IN 0x00000040
#define FLD_FM1_DAGC_SHIFT 0x00000038
#define FLD_FM1_CORDIC_SHIFT 0x00000007
/*****************************************************************************/
#define LPF_PDF_CTL 0x828
/* Reserved [31:30] */
#define FLD_LPF32_SHIFT1 0x30000000
#define FLD_LPF32_SHIFT2 0x0C000000
#define FLD_LPF160_SHIFTA 0x03000000
#define FLD_LPF160_SHIFTB 0x00C00000
#define FLD_LPF160_SHIFTC 0x00300000
#define FLD_LPF32_COEF_SEL2 0x000C0000
#define FLD_LPF32_COEF_SEL1 0x00030000
#define FLD_LPF160_COEF_SELC 0x0000C000
#define FLD_LPF160_COEF_SELB 0x00003000
#define FLD_LPF160_COEF_SELA 0x00000C00
#define FLD_LPF160_IN_EN_REG 0x00000300
#define FLD_PDF4_PDF_SEL 0x000000C0
#define FLD_PDF3_PDF_SEL 0x00000030
#define FLD_PDF2_PDF_SEL 0x0000000C
#define FLD_PDF1_PDF_SEL 0x00000003
/*****************************************************************************/
#define DFT1_CTL1 0x82C
#define FLD_DFT1_DWELL 0xFFFF0000
#define FLD_DFT1_FREQ 0x0000FFFF
/*****************************************************************************/
#define DFT1_CTL2 0x830
#define FLD_DFT1_THRESHOLD 0xFFFFFF00
#define FLD_DFT1_CMP_CTL 0x00000080
#define FLD_DFT1_AVG 0x00000070
/* Reserved [3:1] */
#define FLD_DFT1_START 0x00000001
/*****************************************************************************/
#define DFT1_STATUS 0x834
#define FLD_DFT1_DONE 0x80000000
#define FLD_DFT1_TH_CMP_STAT 0x40000000
#define FLD_DFT1_RESULT 0x3FFFFFFF
/*****************************************************************************/
#define DFT2_CTL1 0x838
#define FLD_DFT2_DWELL 0xFFFF0000
#define FLD_DFT2_FREQ 0x0000FFFF
/*****************************************************************************/
#define DFT2_CTL2 0x83C
#define FLD_DFT2_THRESHOLD 0xFFFFFF00
#define FLD_DFT2_CMP_CTL 0x00000080
#define FLD_DFT2_AVG 0x00000070
/* Reserved [3:1] */
#define FLD_DFT2_START 0x00000001
/*****************************************************************************/
#define DFT2_STATUS 0x840
#define FLD_DFT2_DONE 0x80000000
#define FLD_DFT2_TH_CMP_STAT 0x40000000
#define FLD_DFT2_RESULT 0x3FFFFFFF
/*****************************************************************************/
#define DFT3_CTL1 0x844
#define FLD_DFT3_DWELL 0xFFFF0000
#define FLD_DFT3_FREQ 0x0000FFFF
/*****************************************************************************/
#define DFT3_CTL2 0x848
#define FLD_DFT3_THRESHOLD 0xFFFFFF00
#define FLD_DFT3_CMP_CTL 0x00000080
#define FLD_DFT3_AVG 0x00000070
/* Reserved [3:1] */
#define FLD_DFT3_START 0x00000001
/*****************************************************************************/
#define DFT3_STATUS 0x84C
#define FLD_DFT3_DONE 0x80000000
#define FLD_DFT3_TH_CMP_STAT 0x40000000
#define FLD_DFT3_RESULT 0x3FFFFFFF
/*****************************************************************************/
#define DFT4_CTL1 0x850
#define FLD_DFT4_DWELL 0xFFFF0000
#define FLD_DFT4_FREQ 0x0000FFFF
/*****************************************************************************/
#define DFT4_CTL2 0x854
#define FLD_DFT4_THRESHOLD 0xFFFFFF00
#define FLD_DFT4_CMP_CTL 0x00000080
#define FLD_DFT4_AVG 0x00000070
/* Reserved [3:1] */
#define FLD_DFT4_START 0x00000001
/*****************************************************************************/
#define DFT4_STATUS 0x858
#define FLD_DFT4_DONE 0x80000000
#define FLD_DFT4_TH_CMP_STAT 0x40000000
#define FLD_DFT4_RESULT 0x3FFFFFFF
/*****************************************************************************/
#define AM_MTS_DET 0x85C
#define FLD_AM_MTS_MODE 0x80000000
/* Reserved [30:26] */
#define FLD_AM_SUB 0x02000000
#define FLD_AM_GAIN_EN 0x01000000
/* Reserved [23:16] */
#define FLD_AMMTS_GAIN_SCALE 0x0000E000
#define FLD_MTS_PDF_SHIFT 0x00001800
#define FLD_AM_REG_GAIN 0x00000700
#define FLD_AGC_REF 0x000000FF
/*****************************************************************************/
#define ANALOG_MUX_CTL 0x860
/* Reserved [31:29] */
#define FLD_MUX21_SEL 0x10000000
#define FLD_MUX20_SEL 0x08000000
#define FLD_MUX19_SEL 0x04000000
#define FLD_MUX18_SEL 0x02000000
#define FLD_MUX17_SEL 0x01000000
#define FLD_MUX16_SEL 0x00800000
#define FLD_MUX15_SEL 0x00400000
#define FLD_MUX14_SEL 0x00300000
#define FLD_MUX13_SEL 0x000C0000
#define FLD_MUX12_SEL 0x00020000
#define FLD_MUX11_SEL 0x00018000
#define FLD_MUX10_SEL 0x00004000
#define FLD_MUX9_SEL 0x00002000
#define FLD_MUX8_SEL 0x00001000
#define FLD_MUX7_SEL 0x00000800
#define FLD_MUX6_SEL 0x00000600
#define FLD_MUX5_SEL 0x00000100
#define FLD_MUX4_SEL 0x000000C0
#define FLD_MUX3_SEL 0x00000030
#define FLD_MUX2_SEL 0x0000000C
#define FLD_MUX1_SEL 0x00000003
/*****************************************************************************/
/* Cx231xx redefine */
#define DPLL_CTRL1 0x864
#define DIG_PLL_CTL1 0x864
#define FLD_PLL_STATUS 0x07000000
#define FLD_BANDWIDTH_SELECT 0x00030000
#define FLD_PLL_SHIFT_REG 0x00007000
#define FLD_PHASE_SHIFT 0x000007FF
/*****************************************************************************/
/* Cx231xx redefine */
#define DPLL_CTRL2 0x868
#define DIG_PLL_CTL2 0x868
#define FLD_PLL_UNLOCK_THR 0xFF000000
#define FLD_PLL_LOCK_THR 0x00FF0000
/* Reserved [15:8] */
#define FLD_AM_PDF_SEL2 0x000000C0
#define FLD_AM_PDF_SEL1 0x00000030
#define FLD_DPLL_FSM_CTRL 0x0000000C
/* Reserved [1] */
#define FLD_PLL_PILOT_DET 0x00000001
/*****************************************************************************/
/* Cx231xx redefine */
#define DPLL_CTRL3 0x86C
#define DIG_PLL_CTL3 0x86C
#define FLD_DISABLE_LOOP 0x01000000
#define FLD_A1_DS1_SEL 0x000C0000
#define FLD_A1_DS2_SEL 0x00030000
#define FLD_A1_KI 0x0000FF00
#define FLD_A1_KD 0x000000FF
/*****************************************************************************/
/* Cx231xx redefine */
#define DPLL_CTRL4 0x870
#define DIG_PLL_CTL4 0x870
#define FLD_A2_DS1_SEL 0x000C0000
#define FLD_A2_DS2_SEL 0x00030000
#define FLD_A2_KI 0x0000FF00
#define FLD_A2_KD 0x000000FF
/*****************************************************************************/
/* Cx231xx redefine */
#define DPLL_CTRL5 0x874
#define DIG_PLL_CTL5 0x874
#define FLD_TRK_DS1_SEL 0x000C0000
#define FLD_TRK_DS2_SEL 0x00030000
#define FLD_TRK_KI 0x0000FF00
#define FLD_TRK_KD 0x000000FF
/*****************************************************************************/
#define DEEMPH_GAIN_CTL 0x878
#define FLD_DEEMPH2_GAIN 0xFFFF0000
#define FLD_DEEMPH1_GAIN 0x0000FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_COEFF1 0x87C
#define DEEMPH_COEF1 0x87C
#define FLD_DEEMPH_B0 0xFFFF0000
#define FLD_DEEMPH_A0 0x0000FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_COEFF2 0x880
#define DEEMPH_COEF2 0x880
#define FLD_DEEMPH_B1 0xFFFF0000
#define FLD_DEEMPH_A1 0x0000FFFF
/*****************************************************************************/
#define DBX1_CTL1 0x884
#define FLD_DBX1_WBE_GAIN 0xFFFF0000
#define FLD_DBX1_IN_GAIN 0x0000FFFF
/*****************************************************************************/
#define DBX1_CTL2 0x888
#define FLD_DBX1_SE_BYPASS 0xFFFF0000
#define FLD_DBX1_SE_GAIN 0x0000FFFF
/*****************************************************************************/
#define DBX1_RMS_SE 0x88C
#define FLD_DBX1_RMS_WBE 0xFFFF0000
#define FLD_DBX1_RMS_SE_FLD 0x0000FFFF
/*****************************************************************************/
#define DBX2_CTL1 0x890
#define FLD_DBX2_WBE_GAIN 0xFFFF0000
#define FLD_DBX2_IN_GAIN 0x0000FFFF
/*****************************************************************************/
#define DBX2_CTL2 0x894
#define FLD_DBX2_SE_BYPASS 0xFFFF0000
#define FLD_DBX2_SE_GAIN 0x0000FFFF
/*****************************************************************************/
#define DBX2_RMS_SE 0x898
#define FLD_DBX2_RMS_WBE 0xFFFF0000
#define FLD_DBX2_RMS_SE_FLD 0x0000FFFF
/*****************************************************************************/
#define AM_FM_DIFF 0x89C
/* Reserved [31] */
#define FLD_FM_DIFF_OUT 0x7FFF0000
/* Reserved [15] */
#define FLD_AM_DIFF_OUT 0x00007FFF
/*****************************************************************************/
#define NICAM_FAW 0x8A0
#define FLD_FAWDETWINEND 0xFC000000
#define FLD_FAWDETWINSTR 0x03FF0000
/* Reserved [15:12] */
#define FLD_FAWDETTHRSHLD3 0x00000F00
#define FLD_FAWDETTHRSHLD2 0x000000F0
#define FLD_FAWDETTHRSHLD1 0x0000000F
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_GAIN 0x8A4
#define NICAM_DEEMPHGAIN 0x8A4
/* Reserved [31:18] */
#define FLD_DEEMPHGAIN 0x0003FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_NUMER1 0x8A8
#define NICAM_DEEMPHNUMER1 0x8A8
/* Reserved [31:18] */
#define FLD_DEEMPHNUMER1 0x0003FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_NUMER2 0x8AC
#define NICAM_DEEMPHNUMER2 0x8AC
/* Reserved [31:18] */
#define FLD_DEEMPHNUMER2 0x0003FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_DENOM1 0x8B0
#define NICAM_DEEMPHDENOM1 0x8B0
/* Reserved [31:18] */
#define FLD_DEEMPHDENOM1 0x0003FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define DEEMPH_DENOM2 0x8B4
#define NICAM_DEEMPHDENOM2 0x8B4
/* Reserved [31:18] */
#define FLD_DEEMPHDENOM2 0x0003FFFF
/*****************************************************************************/
#define NICAM_ERRLOG_CTL1 0x8B8
/* Reserved [31:28] */
#define FLD_ERRINTRPTTHSHLD1 0x0FFF0000
/* Reserved [15:12] */
#define FLD_ERRLOGPERIOD 0x00000FFF
/*****************************************************************************/
#define NICAM_ERRLOG_CTL2 0x8BC
/* Reserved [31:28] */
#define FLD_ERRINTRPTTHSHLD3 0x0FFF0000
/* Reserved [15:12] */
#define FLD_ERRINTRPTTHSHLD2 0x00000FFF
/*****************************************************************************/
#define NICAM_ERRLOG_STS1 0x8C0
/* Reserved [31:28] */
#define FLD_ERRLOG2 0x0FFF0000
/* Reserved [15:12] */
#define FLD_ERRLOG1 0x00000FFF
/*****************************************************************************/
#define NICAM_ERRLOG_STS2 0x8C4
/* Reserved [31:12] */
#define FLD_ERRLOG3 0x00000FFF
/*****************************************************************************/
#define NICAM_STATUS 0x8C8
/* Reserved [31:20] */
#define FLD_NICAM_CIB 0x000C0000
#define FLD_NICAM_LOCK_STAT 0x00020000
#define FLD_NICAM_MUTE 0x00010000
#define FLD_NICAMADDIT_DATA 0x0000FFE0
#define FLD_NICAMCNTRL 0x0000001F
/*****************************************************************************/
#define DEMATRIX_CTL 0x8CC
#define FLD_AC97_IN_SHIFT 0xF0000000
#define FLD_I2S_IN_SHIFT 0x0F000000
#define FLD_DEMATRIX_SEL_CTL 0x00FF0000
/* Reserved [15:11] */
#define FLD_DMTRX_BYPASS 0x00000400
#define FLD_DEMATRIX_MODE 0x00000300
/* Reserved [7:6] */
#define FLD_PH_DBX_SEL 0x00000020
#define FLD_PH_CH_SEL 0x00000010
#define FLD_PHASE_FIX 0x0000000F
/*****************************************************************************/
#define PATH1_CTL1 0x8D0
/* Reserved [31:29] */
#define FLD_PATH1_MUTE_CTL 0x1F000000
/* Reserved [23:22] */
#define FLD_PATH1_AVC_CG 0x00300000
#define FLD_PATH1_AVC_RT 0x000F0000
#define FLD_PATH1_AVC_AT 0x0000F000
#define FLD_PATH1_AVC_STEREO 0x00000800
#define FLD_PATH1_AVC_CR 0x00000700
#define FLD_PATH1_AVC_RMS_CON 0x000000F0
#define FLD_PATH1_SEL_CTL 0x0000000F
/*****************************************************************************/
#define PATH1_VOL_CTL 0x8D4
#define FLD_PATH1_AVC_THRESHOLD 0x7FFF0000
#define FLD_PATH1_BAL_LEFT 0x00008000
#define FLD_PATH1_BAL_LEVEL 0x00007F00
#define FLD_PATH1_VOLUME 0x000000FF
/*****************************************************************************/
#define PATH1_EQ_CTL 0x8D8
/* Reserved [31:30] */
#define FLD_PATH1_EQ_TREBLE_VOL 0x3F000000
/* Reserved [23:22] */
#define FLD_PATH1_EQ_MID_VOL 0x003F0000
/* Reserved [15:14] */
#define FLD_PATH1_EQ_BASS_VOL 0x00003F00
/* Reserved [7:1] */
#define FLD_PATH1_EQ_BAND_SEL 0x00000001
/*****************************************************************************/
#define PATH1_SC_CTL 0x8DC
#define FLD_PATH1_SC_THRESHOLD 0x7FFF0000
#define FLD_PATH1_SC_RT 0x0000F000
#define FLD_PATH1_SC_AT 0x00000F00
#define FLD_PATH1_SC_STEREO 0x00000080
#define FLD_PATH1_SC_CR 0x00000070
#define FLD_PATH1_SC_RMS_CON 0x0000000F
/*****************************************************************************/
#define PATH2_CTL1 0x8E0
/* Reserved [31:26] */
#define FLD_PATH2_MUTE_CTL 0x03000000
/* Reserved [23:22] */
#define FLD_PATH2_AVC_CG 0x00300000
#define FLD_PATH2_AVC_RT 0x000F0000
#define FLD_PATH2_AVC_AT 0x0000F000
#define FLD_PATH2_AVC_STEREO 0x00000800
#define FLD_PATH2_AVC_CR 0x00000700
#define FLD_PATH2_AVC_RMS_CON 0x000000F0
#define FLD_PATH2_SEL_CTL 0x0000000F
/*****************************************************************************/
#define PATH2_VOL_CTL 0x8E4
#define FLD_PATH2_AVC_THRESHOLD 0xFFFF0000
#define FLD_PATH2_BAL_LEFT 0x00008000
#define FLD_PATH2_BAL_LEVEL 0x00007F00
#define FLD_PATH2_VOLUME 0x000000FF
/*****************************************************************************/
#define PATH2_EQ_CTL 0x8E8
/* Reserved [31:30] */
#define FLD_PATH2_EQ_TREBLE_VOL 0x3F000000
/* Reserved [23:22] */
#define FLD_PATH2_EQ_MID_VOL 0x003F0000
/* Reserved [15:14] */
#define FLD_PATH2_EQ_BASS_VOL 0x00003F00
/* Reserved [7:1] */
#define FLD_PATH2_EQ_BAND_SEL 0x00000001
/*****************************************************************************/
#define PATH2_SC_CTL 0x8EC
#define FLD_PATH2_SC_THRESHOLD 0xFFFF0000
#define FLD_PATH2_SC_RT 0x0000F000
#define FLD_PATH2_SC_AT 0x00000F00
#define FLD_PATH2_SC_STEREO 0x00000080
#define FLD_PATH2_SC_CR 0x00000070
#define FLD_PATH2_SC_RMS_CON 0x0000000F
/*****************************************************************************/
#define SRC_CTL 0x8F0
#define FLD_SRC_STATUS 0xFFFFFF00
#define FLD_FIFO_LF_EN 0x000000FC
#define FLD_BYPASS_LI 0x00000002
#define FLD_BYPASS_PF 0x00000001
/*****************************************************************************/
#define SRC_LF_COEF 0x8F4
#define FLD_LOOP_FILTER_COEF2 0xFFFF0000
#define FLD_LOOP_FILTER_COEF1 0x0000FFFF
/*****************************************************************************/
#define SRC1_CTL 0x8F8
/* Reserved [31:28] */
#define FLD_SRC1_FIFO_RD_TH 0x0F000000
/* Reserved [23:18] */
#define FLD_SRC1_PHASE_INC 0x0003FFFF
/*****************************************************************************/
#define SRC2_CTL 0x8FC
/* Reserved [31:28] */
#define FLD_SRC2_FIFO_RD_TH 0x0F000000
/* Reserved [23:18] */
#define FLD_SRC2_PHASE_INC 0x0003FFFF
/*****************************************************************************/
#define SRC3_CTL 0x900
/* Reserved [31:28] */
#define FLD_SRC3_FIFO_RD_TH 0x0F000000
/* Reserved [23:18] */
#define FLD_SRC3_PHASE_INC 0x0003FFFF
/*****************************************************************************/
#define SRC4_CTL 0x904
/* Reserved [31:28] */
#define FLD_SRC4_FIFO_RD_TH 0x0F000000
/* Reserved [23:18] */
#define FLD_SRC4_PHASE_INC 0x0003FFFF
/*****************************************************************************/
#define SRC5_CTL 0x908
/* Reserved [31:28] */
#define FLD_SRC5_FIFO_RD_TH 0x0F000000
/* Reserved [23:18] */
#define FLD_SRC5_PHASE_INC 0x0003FFFF
/*****************************************************************************/
#define SRC6_CTL 0x90C
/* Reserved [31:28] */
#define FLD_SRC6_FIFO_RD_TH 0x0F000000
/* Reserved [23:18] */
#define FLD_SRC6_PHASE_INC 0x0003FFFF
/*****************************************************************************/
#define BAND_OUT_SEL 0x910
#define FLD_SRC6_IN_SEL 0xC0000000
#define FLD_SRC6_CLK_SEL 0x30000000
#define FLD_SRC5_IN_SEL 0x0C000000
#define FLD_SRC5_CLK_SEL 0x03000000
#define FLD_SRC4_IN_SEL 0x00C00000
#define FLD_SRC4_CLK_SEL 0x00300000
#define FLD_SRC3_IN_SEL 0x000C0000
#define FLD_SRC3_CLK_SEL 0x00030000
#define FLD_BASEBAND_BYPASS_CTL 0x0000FF00
#define FLD_AC97_SRC_SEL 0x000000C0
#define FLD_I2S_SRC_SEL 0x00000030
#define FLD_PARALLEL2_SRC_SEL 0x0000000C
#define FLD_PARALLEL1_SRC_SEL 0x00000003
/*****************************************************************************/
#define I2S_IN_CTL 0x914
/* Reserved [31:11] */
#define FLD_I2S_UP2X_BW20K 0x00000400
#define FLD_I2S_UP2X_BYPASS 0x00000200
#define FLD_I2S_IN_MASTER_MODE 0x00000100
#define FLD_I2S_IN_SONY_MODE 0x00000080
#define FLD_I2S_IN_RIGHT_JUST 0x00000040
#define FLD_I2S_IN_WS_SEL 0x00000020
#define FLD_I2S_IN_BCN_DEL 0x0000001F
/*****************************************************************************/
#define I2S_OUT_CTL 0x918
/* Reserved [31:17] */
#define FLD_I2S_OUT_SOFT_RESET_EN 0x00010000
/* Reserved [15:9] */
#define FLD_I2S_OUT_MASTER_MODE 0x00000100
#define FLD_I2S_OUT_SONY_MODE 0x00000080
#define FLD_I2S_OUT_RIGHT_JUST 0x00000040
#define FLD_I2S_OUT_WS_SEL 0x00000020
#define FLD_I2S_OUT_BCN_DEL 0x0000001F
/*****************************************************************************/
#define AC97_CTL 0x91C
/* Reserved [31:26] */
#define FLD_AC97_UP2X_BW20K 0x02000000
#define FLD_AC97_UP2X_BYPASS 0x01000000
/* Reserved [23:17] */
#define FLD_AC97_RST_ACL 0x00010000
/* Reserved [15:9] */
#define FLD_AC97_WAKE_UP_SYNC 0x00000100
/* Reserved [7:1] */
#define FLD_AC97_SHUTDOWN 0x00000001
/* Cx231xx redefine */
#define QPSK_IAGC_CTL1 0x94c
#define QPSK_IAGC_CTL2 0x950
#define QPSK_FEPR_FREQ 0x954
#define QPSK_BTL_CTL1 0x958
#define QPSK_BTL_CTL2 0x95c
#define QPSK_CTL_CTL1 0x960
#define QPSK_CTL_CTL2 0x964
#define QPSK_MF_FAGC_CTL 0x968
#define QPSK_EQ_CTL 0x96c
#define QPSK_LOCK_CTL 0x970
/*****************************************************************************/
#define FM1_DFT_CTL 0x9A8
#define FLD_FM1_DFT_THRESHOLD 0xFFFF0000
/* Reserved [15:8] */
#define FLD_FM1_DFT_CMP_CTL 0x00000080
#define FLD_FM1_DFT_AVG 0x00000070
/* Reserved [3:1] */
#define FLD_FM1_DFT_START 0x00000001
/*****************************************************************************/
#define FM1_DFT_STATUS 0x9AC
#define FLD_FM1_DFT_DONE 0x80000000
/* Reserved [30:19] */
#define FLD_FM_DFT_TH_CMP 0x00040000
#define FLD_FM1_DFT 0x0003FFFF
/*****************************************************************************/
#define FM2_DFT_CTL 0x9B0
#define FLD_FM2_DFT_THRESHOLD 0xFFFF0000
/* Reserved [15:8] */
#define FLD_FM2_DFT_CMP_CTL 0x00000080
#define FLD_FM2_DFT_AVG 0x00000070
/* Reserved [3:1] */
#define FLD_FM2_DFT_START 0x00000001
/*****************************************************************************/
#define FM2_DFT_STATUS 0x9B4
#define FLD_FM2_DFT_DONE 0x80000000
/* Reserved [30:19] */
#define FLD_FM2_DFT_TH_CMP_STAT 0x00040000
#define FLD_FM2_DFT 0x0003FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define AAGC_STATUS_REG 0x9B8
#define AAGC_STATUS 0x9B8
/* Reserved [31:27] */
#define FLD_FM2_DAGC_OUT 0x07000000
/* Reserved [23:19] */
#define FLD_FM1_DAGC_OUT 0x00070000
/* Reserved [15:6] */
#define FLD_AFE_VGA_OUT 0x0000003F
/*****************************************************************************/
#define MTS_GAIN_STATUS 0x9BC
/* Reserved [31:14] */
#define FLD_MTS_GAIN 0x00003FFF
#define RDS_OUT 0x9C0
#define FLD_RDS_Q 0xFFFF0000
#define FLD_RDS_I 0x0000FFFF
/*****************************************************************************/
#define AUTOCONFIG_REG 0x9C4
/* Reserved [31:4] */
#define FLD_AUTOCONFIG_MODE 0x0000000F
#define FM_AFC 0x9C8
#define FLD_FM2_AFC 0xFFFF0000
#define FLD_FM1_AFC 0x0000FFFF
/*****************************************************************************/
/* Cx231xx redefine */
#define NEW_SPARE 0x9CC
#define NEW_SPARE_REG 0x9CC
/*****************************************************************************/
#define DBX_ADJ 0x9D0
/* Reserved [31:28] */
#define FLD_DBX2_ADJ 0x0FFF0000
/* Reserved [15:12] */
#define FLD_DBX1_ADJ 0x00000FFF
#define VID_FMT_AUTO 0
#define VID_FMT_NTSC_M 1
#define VID_FMT_NTSC_J 2
#define VID_FMT_NTSC_443 3
#define VID_FMT_PAL_BDGHI 4
#define VID_FMT_PAL_M 5
#define VID_FMT_PAL_N 6
#define VID_FMT_PAL_NC 7
#define VID_FMT_PAL_60 8
#define VID_FMT_SECAM 12
#define VID_FMT_SECAM_60 13
#define INPUT_MODE_CVBS_0 0 /* INPUT_MODE_VALUE(0) */
#define INPUT_MODE_YC_1 1 /* INPUT_MODE_VALUE(1) */
#define INPUT_MODE_YC2_2 2 /* INPUT_MODE_VALUE(2) */
#define INPUT_MODE_YUV_3 3 /* INPUT_MODE_VALUE(3) */
#define LUMA_LPF_LOW_BANDPASS 0 /* 0.6Mhz lowpass filter bandwidth */
#define LUMA_LPF_MEDIUM_BANDPASS 1 /* 1.0Mhz lowpass filter bandwidth */
#define LUMA_LPF_HIGH_BANDPASS 2 /* 1.5Mhz lowpass filter bandwidth */
#define UV_LPF_LOW_BANDPASS 0 /* 0.6Mhz lowpass filter bandwidth */
#define UV_LPF_MEDIUM_BANDPASS 1 /* 1.0Mhz lowpass filter bandwidth */
#define UV_LPF_HIGH_BANDPASS 2 /* 1.5Mhz lowpass filter bandwidth */
#define TWO_TAP_FILT 0
#define THREE_TAP_FILT 1
#define FOUR_TAP_FILT 2
#define FIVE_TAP_FILT 3
#define AUD_CHAN_SRC_PARALLEL 0
#define AUD_CHAN_SRC_I2S_INPUT 1
#define AUD_CHAN_SRC_FLATIRON 2
#define AUD_CHAN_SRC_PARALLEL3 3
#define OUT_MODE_601 0
#define OUT_MODE_656 1
#define OUT_MODE_VIP11 2
#define OUT_MODE_VIP20 3
#define PHASE_INC_49MHZ 0x0DF22
#define PHASE_INC_56MHZ 0x0FA5B
#define PHASE_INC_28MHZ 0x010000
#endif
/*
cx231xx_vbi.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on cx88 driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/version.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-chip-ident.h>
#include <media/msp3400.h>
#include <media/tuner.h>
#include "cx231xx.h"
#include "cx231xx-vbi.h"
static inline void print_err_status(struct cx231xx *dev,
int packet, int status)
{
char *errmsg = "Unknown";
switch (status) {
case -ENOENT:
errmsg = "unlinked synchronuously";
break;
case -ECONNRESET:
errmsg = "unlinked asynchronuously";
break;
case -ENOSR:
errmsg = "Buffer error (overrun)";
break;
case -EPIPE:
errmsg = "Stalled (device not responding)";
break;
case -EOVERFLOW:
errmsg = "Babble (bad cable?)";
break;
case -EPROTO:
errmsg = "Bit-stuff error (bad cable?)";
break;
case -EILSEQ:
errmsg = "CRC/Timeout (could be anything)";
break;
case -ETIME:
errmsg = "Device does not respond";
break;
}
if (packet < 0) {
cx231xx_err(DRIVER_NAME "URB status %d [%s].\n", status, errmsg);
} else {
cx231xx_err(DRIVER_NAME "URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
/*
* Controls the isoc copy of each urb packet
*/
static inline int cx231xx_isoc_vbi_copy(struct cx231xx *dev, struct urb *urb)
{
struct cx231xx_buffer *buf;
struct cx231xx_dmaqueue *dma_q = urb->context;
int rc = 1;
unsigned char *p_buffer;
u32 bytes_parsed = 0, buffer_size = 0;
u8 sav_eav = 0;
if (!dev)
return 0;
if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
return 0;
if (urb->status < 0) {
print_err_status(dev, -1, urb->status);
if (urb->status == -ENOENT)
return 0;
}
buf = dev->vbi_mode.isoc_ctl.buf;
/* get buffer pointer and length */
p_buffer = urb->transfer_buffer;
buffer_size = urb->actual_length;
if (buffer_size > 0) {
bytes_parsed = 0;
if(dma_q->is_partial_line) {
/* Handle the case where we were working on a partial line */
sav_eav = dma_q->last_sav;
} else {
/* Check for a SAV/EAV overlapping the buffer boundary */
sav_eav = cx231xx_find_boundary_SAV_EAV(p_buffer, dma_q->partial_buf, &bytes_parsed);
}
sav_eav &= 0xF0;
/* Get the first line if we have some portion of an SAV/EAV from the last buffer
or a partial line */
if(sav_eav) {
bytes_parsed += cx231xx_get_vbi_line(dev, dma_q,
sav_eav, /* SAV/EAV */
p_buffer + bytes_parsed, /* p_buffer */
buffer_size - bytes_parsed); /* buffer size */
}
/* Now parse data that is completely in this buffer */
dma_q->is_partial_line = 0;
while(bytes_parsed < buffer_size)
{
u32 bytes_used = 0;
sav_eav = cx231xx_find_next_SAV_EAV(
p_buffer + bytes_parsed, /* p_buffer */
buffer_size - bytes_parsed, /* buffer size */
&bytes_used); /* Receives bytes used to get SAV/EAV */
bytes_parsed += bytes_used;
sav_eav &= 0xF0;
if(sav_eav && (bytes_parsed < buffer_size))
{
bytes_parsed += cx231xx_get_vbi_line(dev, dma_q,
sav_eav, /* SAV/EAV */
p_buffer + bytes_parsed, /* p_buffer */
buffer_size - bytes_parsed); /* buffer size */
}
}
/* Save the last four bytes of the buffer so we can check the buffer boundary
condition next time */
memcpy(dma_q->partial_buf, p_buffer + buffer_size - 4, 4);
bytes_parsed = 0;
}
return rc;
}
/* ------------------------------------------------------------------
Vbi buf operations
------------------------------------------------------------------*/
static int
vbi_buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
{
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
u32 height = 0;
height = ((dev->norm & V4L2_STD_625_50) ?
PAL_VBI_LINES : NTSC_VBI_LINES) ;
*size = ( dev->width * height * 2);
if (0 == *count)
*count = CX231XX_DEF_VBI_BUF;
if (*count < CX231XX_MIN_BUF)
*count = CX231XX_MIN_BUF;
/* call VBI setup if required */
/* cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, &f);
*/
return 0;
}
/* This is called *without* dev->slock held; please keep it that way */
static void free_buffer(struct videobuf_queue *vq, struct cx231xx_buffer *buf)
{
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
unsigned long flags = 0;
if (in_interrupt())
BUG();
/* We used to wait for the buffer to finish here, but this didn't work
because, as we were keeping the state as VIDEOBUF_QUEUED,
videobuf_queue_cancel marked it as finished for us.
(Also, it could wedge forever if the hardware was misconfigured.)
This should be safe; by the time we get here, the buffer isn't
queued anymore. If we ever start marking the buffers as
VIDEOBUF_ACTIVE, it won't be, though.
*/
spin_lock_irqsave(&dev->vbi_mode.slock, flags);
if (dev->vbi_mode.isoc_ctl.buf == buf)
dev->vbi_mode.isoc_ctl.buf = NULL;
spin_unlock_irqrestore(&dev->vbi_mode.slock, flags);
videobuf_vmalloc_free(&buf->vb);
buf->vb.state = VIDEOBUF_NEEDS_INIT;
}
static int
vbi_buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
enum v4l2_field field)
{
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx_buffer *buf = container_of(vb, struct cx231xx_buffer, vb);
struct cx231xx *dev = fh->dev;
int rc = 0, urb_init = 0;
u32 height = 0;
height = ((dev->norm & V4L2_STD_625_50) ?
PAL_VBI_LINES : NTSC_VBI_LINES) ;
buf->vb.size = ( (dev->width << 1) * height );
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
return -EINVAL;
buf->vb.width = dev->width;
buf->vb.height = height;
buf->vb.field = field;
buf->vb.field = V4L2_FIELD_SEQ_TB;
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
rc = videobuf_iolock(vq, &buf->vb, NULL);
if (rc < 0)
goto fail;
}
if (!dev->vbi_mode.isoc_ctl.num_bufs)
urb_init = 1;
if (urb_init) {
rc = cx231xx_init_vbi_isoc(dev, CX231XX_NUM_VBI_PACKETS,
CX231XX_NUM_VBI_BUFS, dev->vbi_mode.alt_max_pkt_size[0],
cx231xx_isoc_vbi_copy);
if (rc < 0)
goto fail;
}
buf->vb.state = VIDEOBUF_PREPARED;
return 0;
fail:
free_buffer(vq, buf);
return rc;
}
static void
vbi_buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
{
struct cx231xx_buffer *buf = container_of(vb, struct cx231xx_buffer, vb);
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
struct cx231xx_dmaqueue *vidq = &dev->vbi_mode.vidq;
buf->vb.state = VIDEOBUF_QUEUED;
list_add_tail(&buf->vb.queue, &vidq->active);
}
static void vbi_buffer_release(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct cx231xx_buffer *buf = container_of(vb, struct cx231xx_buffer, vb);
/*
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = (struct cx231xx *)fh->dev;
cx231xx_info(DRIVER_NAME "cx231xx: called vbi_buffer_release\n");
*/
free_buffer(vq, buf);
}
struct videobuf_queue_ops cx231xx_vbi_qops = {
.buf_setup = vbi_buffer_setup,
.buf_prepare = vbi_buffer_prepare,
.buf_queue = vbi_buffer_queue,
.buf_release = vbi_buffer_release,
};
/* ------------------------------------------------------------------
URB control
------------------------------------------------------------------*/
/*
* IRQ callback, called by URB callback
*/
static void cx231xx_irq_vbi_callback(struct urb *urb)
{
struct cx231xx_dmaqueue *dma_q = urb->context;
struct cx231xx_video_mode *vmode = container_of(dma_q, struct cx231xx_video_mode, vidq);
struct cx231xx *dev = container_of(vmode, struct cx231xx, vbi_mode);
int rc;
switch (urb->status) {
case 0: /* success */
case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
case -ESHUTDOWN:
return;
default: /* error */
cx231xx_err(DRIVER_NAME "urb completition error %d.\n", urb->status);
break;
}
/* Copy data from URB */
spin_lock(&dev->vbi_mode.slock);
rc = dev->vbi_mode.isoc_ctl.isoc_copy(dev, urb);
spin_unlock(&dev->vbi_mode.slock);
/* Reset status */
urb->status = 0;
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
cx231xx_err(DRIVER_NAME "urb resubmit failed (error=%i)\n",
urb->status);
}
}
/*
* Stop and Deallocate URBs
*/
void cx231xx_uninit_vbi_isoc(struct cx231xx *dev)
{
struct urb *urb;
int i;
cx231xx_info(DRIVER_NAME "cx231xx: called cx231xx_uninit_vbi_isoc\n");
dev->vbi_mode.isoc_ctl.nfields = -1;
for (i = 0; i < dev->vbi_mode.isoc_ctl.num_bufs; i++) {
urb = dev->vbi_mode.isoc_ctl.urb[i];
if (urb) {
if (!irqs_disabled())
usb_kill_urb(urb);
else
usb_unlink_urb(urb);
if (dev->vbi_mode.isoc_ctl.transfer_buffer[i]) {
kfree(dev->vbi_mode.isoc_ctl.transfer_buffer[i]);
dev->vbi_mode.isoc_ctl.transfer_buffer[i] = NULL;
}
usb_free_urb(urb);
dev->vbi_mode.isoc_ctl.urb[i] = NULL;
}
dev->vbi_mode.isoc_ctl.transfer_buffer[i] = NULL;
}
kfree(dev->vbi_mode.isoc_ctl.urb);
kfree(dev->vbi_mode.isoc_ctl.transfer_buffer);
dev->vbi_mode.isoc_ctl.urb = NULL;
dev->vbi_mode.isoc_ctl.transfer_buffer = NULL;
dev->vbi_mode.isoc_ctl.num_bufs = 0;
cx231xx_capture_start(dev, 0, Vbi);
}
EXPORT_SYMBOL_GPL(cx231xx_uninit_vbi_isoc);
/*
* Allocate URBs and start IRQ
*/
int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
int num_bufs, int max_pkt_size,
int (*isoc_copy) (struct cx231xx *dev, struct urb *urb))
{
struct cx231xx_dmaqueue *dma_q = &dev->vbi_mode.vidq;
int i;
int sb_size, pipe;
struct urb *urb;
int rc;
cx231xx_info(DRIVER_NAME "cx231xx: called cx231xx_prepare_isoc\n");
/* De-allocates all pending stuff */
cx231xx_uninit_vbi_isoc(dev);
/* clear if any halt */
usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->vbi_mode.end_point_addr));
dev->vbi_mode.isoc_ctl.isoc_copy = isoc_copy;
dev->vbi_mode.isoc_ctl.num_bufs = num_bufs;
dma_q->pos = 0;
dma_q->is_partial_line = 0;
dma_q->last_sav = 0;
dma_q->current_field = -1;
dma_q->bytes_left_in_line = dev->width << 1;
dma_q->lines_per_field = ((dev->norm & V4L2_STD_625_50) ?
PAL_VBI_LINES : NTSC_VBI_LINES) ;
dma_q->lines_completed = 0;
for(i = 0; i < 8 ; i++)
dma_q->partial_buf[i] = 0;
dev->vbi_mode.isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
if (!dev->vbi_mode.isoc_ctl.urb) {
cx231xx_errdev("cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->vbi_mode.isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
GFP_KERNEL);
if (!dev->vbi_mode.isoc_ctl.transfer_buffer) {
cx231xx_errdev("cannot allocate memory for usbtransfer\n");
kfree(dev->vbi_mode.isoc_ctl.urb);
return -ENOMEM;
}
dev->vbi_mode.isoc_ctl.max_pkt_size = max_pkt_size;
dev->vbi_mode.isoc_ctl.buf = NULL;
sb_size = max_packets * dev->vbi_mode.isoc_ctl.max_pkt_size;
/* allocate urbs and transfer buffers */
for (i = 0; i < dev->vbi_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
cx231xx_err(DRIVER_NAME ": cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
dev->vbi_mode.isoc_ctl.urb[i] = urb;
urb->transfer_flags = 0;
dev->vbi_mode.isoc_ctl.transfer_buffer[i] = kzalloc(sb_size, GFP_KERNEL);
if (!dev->vbi_mode.isoc_ctl.transfer_buffer[i]) {
cx231xx_err(DRIVER_NAME ": unable to allocate %i bytes for transfer"
" buffer %i%s\n",
sb_size, i,
in_interrupt()?" while in int":"");
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
pipe = usb_rcvbulkpipe(dev->udev, dev->vbi_mode.end_point_addr);
usb_fill_bulk_urb(urb, dev->udev, pipe,
dev->vbi_mode.isoc_ctl.transfer_buffer[i], sb_size,
cx231xx_irq_vbi_callback, dma_q);
}
init_waitqueue_head(&dma_q->wq);
/* submit urbs and enables IRQ */
for (i = 0; i < dev->vbi_mode.isoc_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->vbi_mode.isoc_ctl.urb[i], GFP_ATOMIC);
if (rc) {
cx231xx_err(DRIVER_NAME ": submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_vbi_isoc(dev);
return rc;
}
}
cx231xx_capture_start(dev, 1, Vbi);
return 0;
}
EXPORT_SYMBOL_GPL(cx231xx_init_vbi_isoc);
u32 cx231xx_get_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 sav_eav, u8 *p_buffer, u32 buffer_size)
{
u32 bytes_copied = 0;
int current_field = -1;
switch(sav_eav) {
case SAV_VBI_FIELD1:
current_field = 1;
break;
case SAV_VBI_FIELD2:
current_field = 2;
break;
default:
break;
}
if(current_field < 0 )
return bytes_copied;
dma_q->last_sav = sav_eav;
bytes_copied = cx231xx_copy_vbi_line(dev, dma_q, p_buffer, buffer_size, current_field);
return bytes_copied;
}
/*
* Announces that a buffer were filled and request the next
*/
static inline void vbi_buffer_filled(struct cx231xx *dev,
struct cx231xx_dmaqueue *dma_q,
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
/* cx231xx_info(DRIVER_NAME "[%p/%d] wakeup\n", buf, buf->vb.i); */
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
do_gettimeofday(&buf->vb.ts);
dev->vbi_mode.isoc_ctl.buf = NULL;
list_del(&buf->vb.queue);
wake_up(&buf->vb.done);
}
u32 cx231xx_copy_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_line, u32 length, int field_number)
{
u32 bytes_to_copy;
struct cx231xx_buffer *buf;
u32 _line_size = dev->width * 2;
if( dma_q->current_field != field_number ) {
cx231xx_reset_vbi_buffer(dev, dma_q);
}
/* get the buffer pointer */
buf = dev->vbi_mode.isoc_ctl.buf;
/* Remember the field number for next time */
dma_q->current_field = field_number;
bytes_to_copy = dma_q->bytes_left_in_line;
if(bytes_to_copy > length)
bytes_to_copy = length;
if(dma_q->lines_completed >= dma_q->lines_per_field) {
dma_q->bytes_left_in_line -= bytes_to_copy;
dma_q->is_partial_line = (dma_q->bytes_left_in_line == 0) ? 0 : 1;
return 0;
}
dma_q->is_partial_line = 1;
/* If we don't have a buffer, just return the number of bytes we would
have copied if we had a buffer. */
if(!buf) {
dma_q->bytes_left_in_line -= bytes_to_copy;
dma_q->is_partial_line = (dma_q->bytes_left_in_line == 0) ? 0 : 1;
return bytes_to_copy;
}
/* copy the data to video buffer */
cx231xx_do_vbi_copy(dev, dma_q, p_line, bytes_to_copy);
dma_q->pos += bytes_to_copy;
dma_q->bytes_left_in_line -= bytes_to_copy;
if(dma_q->bytes_left_in_line == 0) {
dma_q->bytes_left_in_line = _line_size;
dma_q->lines_completed++;
dma_q->is_partial_line = 0;
if(cx231xx_is_vbi_buffer_done(dev, dma_q) && buf ) {
vbi_buffer_filled(dev, dma_q, buf);
dma_q->pos = 0;
buf = NULL;
dma_q->lines_completed = 0;
}
}
return bytes_to_copy;
}
/*
* video-buf generic routine to get the next available buffer
*/
static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q,
struct cx231xx_buffer **buf)
{
struct cx231xx_video_mode *vmode = container_of(dma_q, struct cx231xx_video_mode, vidq);
struct cx231xx *dev = container_of(vmode, struct cx231xx, vbi_mode);
char *outp;
if (list_empty(&dma_q->active)) {
cx231xx_err(DRIVER_NAME ": No active queue to serve\n");
dev->vbi_mode.isoc_ctl.buf = NULL;
*buf = NULL;
return;
}
/* Get the next buffer */
*buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);
/* Cleans up buffer - Usefull for testing for frame/URB loss */
outp = videobuf_to_vmalloc(&(*buf)->vb);
memset(outp, 0, (*buf)->vb.size);
dev->vbi_mode.isoc_ctl.buf = *buf;
return;
}
void cx231xx_reset_vbi_buffer(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q)
{
struct cx231xx_buffer *buf;
buf = dev->vbi_mode.isoc_ctl.buf;
if(buf == NULL) {
/* first try to get the buffer */
get_next_vbi_buf(dma_q, &buf);
dma_q->pos = 0;
dma_q->current_field = -1;
}
dma_q->bytes_left_in_line = dev->width << 1;
dma_q->lines_completed = 0;
}
int cx231xx_do_vbi_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_buffer, u32 bytes_to_copy)
{
u8 *p_out_buffer = NULL;
u32 current_line_bytes_copied = 0;
struct cx231xx_buffer *buf;
u32 _line_size = dev->width << 1;
void *startwrite;
int offset, lencopy;
buf = dev->vbi_mode.isoc_ctl.buf;
if (buf == NULL) {
return -1;
}
p_out_buffer = videobuf_to_vmalloc(&buf->vb);
if(dma_q->bytes_left_in_line != _line_size ) {
current_line_bytes_copied = _line_size - dma_q->bytes_left_in_line;
}
offset = ( dma_q->lines_completed * _line_size ) + current_line_bytes_copied;
/* prepare destination address */
startwrite = p_out_buffer + offset;
lencopy = dma_q->bytes_left_in_line > bytes_to_copy ? bytes_to_copy : dma_q->bytes_left_in_line;
memcpy(startwrite, p_buffer, lencopy);
return 0;
}
u8 cx231xx_is_vbi_buffer_done(struct cx231xx *dev,struct cx231xx_dmaqueue *dma_q)
{
u32 height = 0;
height = ((dev->norm & V4L2_STD_625_50) ?
PAL_VBI_LINES : NTSC_VBI_LINES) ;
return (dma_q->lines_completed == height)?1:0;
}
/*
cx231xx_vbi.h - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on cx88 driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _CX231XX_VBI_H
#define _CX231XX_VBI_H
extern struct videobuf_queue_ops cx231xx_vbi_qops;
#define NTSC_VBI_START_LINE 10 /* line 10 - 21 */
#define NTSC_VBI_END_LINE 21
#define NTSC_VBI_LINES (NTSC_VBI_END_LINE - NTSC_VBI_START_LINE + 1)
#define PAL_VBI_START_LINE 6
#define PAL_VBI_END_LINE 23
#define PAL_VBI_LINES (PAL_VBI_END_LINE - PAL_VBI_START_LINE + 1)
#define VBI_STRIDE 1440
#define VBI_SAMPLES_PER_LINE 1440
#define CX231XX_NUM_VBI_PACKETS 4
#define CX231XX_NUM_VBI_BUFS 5
/* stream functions */
int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
int num_bufs, int max_pkt_size,
int (*isoc_copy) (struct cx231xx *dev, struct urb *urb));
void cx231xx_uninit_vbi_isoc(struct cx231xx *dev);
/* vbi data copy functions */
u32 cx231xx_get_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 sav_eav, u8 *p_buffer, u32 buffer_size);
u32 cx231xx_copy_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_line, u32 length, int field_number);
void cx231xx_reset_vbi_buffer(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q);
int cx231xx_do_vbi_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_buffer, u32 bytes_to_copy);
u8 cx231xx_is_vbi_buffer_done(struct cx231xx *dev,struct cx231xx_dmaqueue *dma_q);
#endif
/*
cx231xx-video.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
Based on cx23885 driver
Based on cx88 driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/version.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-chip-ident.h>
#include <media/msp3400.h>
#include <media/tuner.h>
#include "dvb_frontend.h"
#include "cx231xx.h"
#include "cx231xx-vbi.h"
#define DRIVER_AUTHOR "Srinivasa Deevi <srinivasa.deevi@conexant.com>"
#define DRIVER_DESC "Conexant cx231xx based USB video device driver"
#define cx231xx_videodbg(fmt, arg...) do {\
if (video_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
static unsigned int isoc_debug;
module_param(isoc_debug, int, 0644);
MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]");
#define cx231xx_isocdbg(fmt, arg...) \
do {\
if (isoc_debug) { \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); \
} \
} while (0)
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
static unsigned int card[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
static unsigned int video_nr[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
static unsigned int vbi_nr[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
static unsigned int radio_nr[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
module_param_array(card, int, NULL, 0444);
module_param_array(video_nr, int, NULL, 0444);
module_param_array(vbi_nr, int, NULL, 0444);
module_param_array(radio_nr, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
MODULE_PARM_DESC(video_nr, "video device numbers");
MODULE_PARM_DESC(vbi_nr, "vbi device numbers");
MODULE_PARM_DESC(radio_nr, "radio device numbers");
static unsigned int video_debug;
module_param(video_debug, int, 0644);
MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
/* supported video standards */
static struct cx231xx_fmt format[] = {
{
.name = "16bpp YUY2, 4:2:2, packed",
.fourcc = V4L2_PIX_FMT_YUYV,
.depth = 16,
.reg = 0,
},
};
/* supported controls */
/* Common to all boards */
/* ------------------------------------------------------------------- */
static const struct v4l2_queryctrl no_ctl = {
.name = "42",
.flags = V4L2_CTRL_FLAG_DISABLED,
};
static struct cx231xx_ctrl cx231xx_ctls[] = {
/* --- video --- */
{
.v = {
.id = V4L2_CID_BRIGHTNESS,
.name = "Brightness",
.minimum = 0x00,
.maximum = 0xff,
.step = 1,
.default_value = 0x7f,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.off = 128,
.reg = LUMA_CTRL,
.mask = 0x00ff,
.shift = 0,
}, {
.v = {
.id = V4L2_CID_CONTRAST,
.name = "Contrast",
.minimum = 0,
.maximum = 0xff,
.step = 1,
.default_value = 0x3f,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.off = 0,
.reg = LUMA_CTRL,
.mask = 0xff00,
.shift = 8,
}, {
.v = {
.id = V4L2_CID_HUE,
.name = "Hue",
.minimum = 0,
.maximum = 0xff,
.step = 1,
.default_value = 0x7f,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.off = 128,
.reg = CHROMA_CTRL,
.mask = 0xff0000,
.shift = 16,
}, {
/* strictly, this only describes only U saturation.
* V saturation is handled specially through code.
*/
.v = {
.id = V4L2_CID_SATURATION,
.name = "Saturation",
.minimum = 0,
.maximum = 0xff,
.step = 1,
.default_value = 0x7f,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.off = 0,
.reg = CHROMA_CTRL,
.mask = 0x00ff,
.shift = 0,
}, {
/* --- audio --- */
.v = {
.id = V4L2_CID_AUDIO_MUTE,
.name = "Mute",
.minimum = 0,
.maximum = 1,
.default_value = 1,
.type = V4L2_CTRL_TYPE_BOOLEAN,
},
.reg = PATH1_CTL1,
.mask = (0x1f << 24),
.shift = 24,
}, {
.v = {
.id = V4L2_CID_AUDIO_VOLUME,
.name = "Volume",
.minimum = 0,
.maximum = 0x3f,
.step = 1,
.default_value = 0x3f,
.type = V4L2_CTRL_TYPE_INTEGER,
},
.reg = PATH1_VOL_CTL,
.mask = 0xff,
.shift = 0,
}
};
static const int CX231XX_CTLS = ARRAY_SIZE(cx231xx_ctls);
static const u32 cx231xx_user_ctrls[] = {
V4L2_CID_USER_CLASS,
V4L2_CID_BRIGHTNESS,
V4L2_CID_CONTRAST,
V4L2_CID_SATURATION,
V4L2_CID_HUE,
V4L2_CID_AUDIO_VOLUME,
#if 0
V4L2_CID_AUDIO_BALANCE,
#endif
V4L2_CID_AUDIO_MUTE,
0
};
static const u32 *ctrl_classes[] = {
cx231xx_user_ctrls,
NULL
};
/* ------------------------------------------------------------------
Video buffer and parser functions
------------------------------------------------------------------*/
/*
* Announces that a buffer were filled and request the next
*/
static inline void buffer_filled(struct cx231xx *dev,
struct cx231xx_dmaqueue *dma_q,
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
cx231xx_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i);
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
do_gettimeofday(&buf->vb.ts);
dev->video_mode.isoc_ctl.buf = NULL;
list_del(&buf->vb.queue);
wake_up(&buf->vb.done);
}
static inline void print_err_status(struct cx231xx *dev,
int packet, int status)
{
char *errmsg = "Unknown";
switch (status) {
case -ENOENT:
errmsg = "unlinked synchronuously";
break;
case -ECONNRESET:
errmsg = "unlinked asynchronuously";
break;
case -ENOSR:
errmsg = "Buffer error (overrun)";
break;
case -EPIPE:
errmsg = "Stalled (device not responding)";
break;
case -EOVERFLOW:
errmsg = "Babble (bad cable?)";
break;
case -EPROTO:
errmsg = "Bit-stuff error (bad cable?)";
break;
case -EILSEQ:
errmsg = "CRC/Timeout (could be anything)";
break;
case -ETIME:
errmsg = "Device does not respond";
break;
}
if (packet < 0) {
cx231xx_isocdbg("URB status %d [%s].\n", status, errmsg);
} else {
cx231xx_isocdbg("URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
/*
* video-buf generic routine to get the next available buffer
*/
static inline void get_next_buf(struct cx231xx_dmaqueue *dma_q,
struct cx231xx_buffer **buf)
{
struct cx231xx_video_mode *vmode = container_of(dma_q, struct cx231xx_video_mode, vidq);
struct cx231xx *dev = container_of(vmode, struct cx231xx, video_mode);
char *outp;
if (list_empty(&dma_q->active)) {
cx231xx_isocdbg("No active queue to serve\n");
dev->video_mode.isoc_ctl.buf = NULL;
*buf = NULL;
return;
}
/* Get the next buffer */
*buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);
/* Cleans up buffer - Usefull for testing for frame/URB loss */
outp = videobuf_to_vmalloc(&(*buf)->vb);
memset(outp, 0, (*buf)->vb.size);
dev->video_mode.isoc_ctl.buf = *buf;
return;
}
/*
* Controls the isoc copy of each urb packet
*/
static inline int cx231xx_isoc_copy(struct cx231xx *dev, struct urb *urb)
{
struct cx231xx_buffer *buf;
struct cx231xx_dmaqueue *dma_q = urb->context;
unsigned char *outp = NULL;
int i, rc = 1;
unsigned char *p_buffer;
u32 bytes_parsed = 0, buffer_size = 0;
u8 sav_eav = 0;
if (!dev)
return 0;
if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
return 0;
if (urb->status < 0) {
print_err_status(dev, -1, urb->status);
if (urb->status == -ENOENT)
return 0;
}
buf = dev->video_mode.isoc_ctl.buf;
if (buf != NULL)
outp = videobuf_to_vmalloc(&buf->vb);
for (i = 0; i < urb->number_of_packets; i++) {
int status = urb->iso_frame_desc[i].status;
if (status < 0) {
print_err_status(dev, i, status);
if (urb->iso_frame_desc[i].status != -EPROTO)
continue;
}
if (urb->iso_frame_desc[i].actual_length <= 0) {
/* cx231xx_isocdbg("packet %d is empty",i); - spammy */
continue;
}
if (urb->iso_frame_desc[i].actual_length >
dev->video_mode.max_pkt_size) {
cx231xx_isocdbg("packet bigger than packet size");
continue;
}
/* get buffer pointer and length */
p_buffer = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
buffer_size = urb->iso_frame_desc[i].actual_length;
bytes_parsed = 0;
if(dma_q->is_partial_line)
{
/* Handle the case where we were working on a partial line */
sav_eav = dma_q->last_sav;
} else {
/* Check for a SAV/EAV overlapping the buffer boundary */
sav_eav = cx231xx_find_boundary_SAV_EAV(p_buffer, dma_q->partial_buf, &bytes_parsed);
}
sav_eav &= 0xF0;
/* Get the first line if we have some portion of an SAV/EAV from the last buffer
or a partial line */
if(sav_eav) {
bytes_parsed += cx231xx_get_video_line(dev, dma_q,
sav_eav, /* SAV/EAV */
p_buffer + bytes_parsed, /* p_buffer */
buffer_size - bytes_parsed); /* buffer size */
}
/* Now parse data that is completely in this buffer */
/* dma_q->is_partial_line = 0; */
while(bytes_parsed < buffer_size)
{
u32 bytes_used = 0;
sav_eav = cx231xx_find_next_SAV_EAV(
p_buffer + bytes_parsed, /* p_buffer */
buffer_size - bytes_parsed, /* buffer size */
&bytes_used); /* Receives bytes used to get SAV/EAV */
bytes_parsed += bytes_used;
sav_eav &= 0xF0;
if(sav_eav && (bytes_parsed < buffer_size))
{
bytes_parsed += cx231xx_get_video_line(dev, dma_q,
sav_eav, /* SAV/EAV */
p_buffer + bytes_parsed, /* p_buffer */
buffer_size - bytes_parsed); /* buffer size */
}
}
/* Save the last four bytes of the buffer so we can check the buffer boundary
condition next time */
memcpy(dma_q->partial_buf, p_buffer + buffer_size - 4, 4);
bytes_parsed = 0;
}
return rc;
}
u8 cx231xx_find_boundary_SAV_EAV(u8 *p_buffer, u8 *partial_buf, u32 *p_bytes_used)
{
u32 bytes_used;
u8 boundary_bytes[8];
u8 sav_eav = 0;
*p_bytes_used = 0;
/* Create an array of the last 4 bytes of the last buffer and the first
4 bytes of the current buffer. */
memcpy(boundary_bytes, partial_buf, 4);
memcpy(boundary_bytes + 4, p_buffer, 4);
/* Check for the SAV/EAV in the boundary buffer */
sav_eav = cx231xx_find_next_SAV_EAV((u8*)&boundary_bytes, 8, &bytes_used);
if(sav_eav) {
/* found a boundary SAV/EAV. Updates the bytes used to reflect
only those used in the new buffer */
*p_bytes_used = bytes_used - 4;
}
return sav_eav;
}
u8 cx231xx_find_next_SAV_EAV(u8 *p_buffer, u32 buffer_size, u32 *p_bytes_used)
{
u32 i;
u8 sav_eav = 0;
/* Don't search if the buffer size is less than 4. It causes a page fault since
buffer_size - 4 evaluates to a large number in that case. */
if(buffer_size < 4) {
*p_bytes_used = buffer_size;
return 0;
}
for(i = 0;i < (buffer_size - 3); i++) {
if((p_buffer[i] == 0xFF) &&
(p_buffer[i+1] == 0x00) &&
(p_buffer[i+2] == 0x00)) {
*p_bytes_used = i+4;
sav_eav = p_buffer[i+3];
return sav_eav;
}
}
*p_bytes_used = buffer_size;
return 0;
}
u32 cx231xx_get_video_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 sav_eav, u8 *p_buffer, u32 buffer_size)
{
u32 bytes_copied = 0;
int current_field = -1;
switch(sav_eav) {
case SAV_ACTIVE_VIDEO_FIELD1:
/* looking for skipped line which occurred in PAL 720x480 mode. In this case,
there will be no active data contained between the SAV and EAV */
if ( (buffer_size > 3) &&
(p_buffer[0] == 0xFF) && (p_buffer[1] == 0x00) && (p_buffer[2] == 0x00) &&
( (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD1) || (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD2) ||
(p_buffer[3] == EAV_VBLANK_FIELD1) || (p_buffer[3] == EAV_VBLANK_FIELD2)
)
)
{
return bytes_copied;
}
current_field = 1;
break;
case SAV_ACTIVE_VIDEO_FIELD2:
/* looking for skipped line which occurred in PAL 720x480 mode. In this case,
there will be no active data contained between the SAV and EAV */
if ( (buffer_size > 3) &&
(p_buffer[0] == 0xFF) && (p_buffer[1] == 0x00) && (p_buffer[2] == 0x00) &&
( (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD1) || (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD2) ||
(p_buffer[3] == EAV_VBLANK_FIELD1) || (p_buffer[3] == EAV_VBLANK_FIELD2)
)
)
{
return bytes_copied;
}
current_field = 2;
break;
}
dma_q->last_sav = sav_eav;
bytes_copied = cx231xx_copy_video_line(dev, dma_q, p_buffer, buffer_size, current_field);
return bytes_copied;
}
u32 cx231xx_copy_video_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_line, u32 length, int field_number)
{
u32 bytes_to_copy;
struct cx231xx_buffer *buf;
u32 _line_size = dev->width * 2;
if( dma_q->current_field != field_number ) {
cx231xx_reset_video_buffer(dev, dma_q);
}
/* get the buffer pointer */
buf = dev->video_mode.isoc_ctl.buf;
/* Remember the field number for next time */
dma_q->current_field = field_number;
bytes_to_copy = dma_q->bytes_left_in_line;
if(bytes_to_copy > length)
bytes_to_copy = length;
if(dma_q->lines_completed >= dma_q->lines_per_field) {
dma_q->bytes_left_in_line -= bytes_to_copy;
dma_q->is_partial_line = (dma_q->bytes_left_in_line == 0) ? 0 : 1;
return 0;
}
dma_q->is_partial_line = 1;
/* If we don't have a buffer, just return the number of bytes we would
have copied if we had a buffer. */
if(!buf)
{
dma_q->bytes_left_in_line -= bytes_to_copy;
dma_q->is_partial_line = (dma_q->bytes_left_in_line == 0) ? 0 : 1;
return bytes_to_copy;
}
/* copy the data to video buffer */
cx231xx_do_copy(dev, dma_q, p_line, bytes_to_copy);
dma_q->pos += bytes_to_copy;
dma_q->bytes_left_in_line -= bytes_to_copy;
if(dma_q->bytes_left_in_line == 0) {
dma_q->bytes_left_in_line = _line_size;
dma_q->lines_completed++;
dma_q->is_partial_line = 0;
if(cx231xx_is_buffer_done(dev, dma_q) && buf) {
buffer_filled(dev, dma_q, buf);
dma_q->pos = 0;
buf = NULL;
dma_q->lines_completed = 0;
}
}
return bytes_to_copy;
}
void cx231xx_reset_video_buffer(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q)
{
struct cx231xx_buffer *buf;
/* handle the switch from field 1 to field 2 */
if(dma_q->current_field == 1) {
if(dma_q->lines_completed >= dma_q->lines_per_field ) {
dma_q->field1_done = 1;
} else {
dma_q->field1_done = 0;
}
}
buf = dev->video_mode.isoc_ctl.buf;
if(buf == NULL) {
u8* outp = NULL;
/* first try to get the buffer */
get_next_buf(dma_q, &buf);
if(buf)
outp = videobuf_to_vmalloc(&buf->vb);
dma_q->pos = 0;
dma_q->field1_done = 0;
dma_q->current_field = -1;
}
/* reset the counters */
dma_q->bytes_left_in_line = dev->width << 1;
dma_q->lines_completed = 0;
}
int cx231xx_do_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_buffer, u32 bytes_to_copy)
{
u8 *p_out_buffer = NULL;
u32 current_line_bytes_copied = 0;
struct cx231xx_buffer *buf;
u32 _line_size = dev->width << 1;
void *startwrite;
int offset, lencopy;
buf = dev->video_mode.isoc_ctl.buf;
if (buf == NULL)
return -1;
p_out_buffer = videobuf_to_vmalloc(&buf->vb);
current_line_bytes_copied = _line_size - dma_q->bytes_left_in_line;
/* Offset field 2 one line from the top of the buffer */
offset = (dma_q->current_field == 1)? 0: _line_size;
/* Offset for field 2 */
startwrite = p_out_buffer + offset;
/* lines already completed in the current field */
startwrite += (dma_q->lines_completed * _line_size * 2);
/* bytes already completed in the current line */
startwrite += current_line_bytes_copied;
lencopy = dma_q->bytes_left_in_line > bytes_to_copy ? bytes_to_copy : dma_q->bytes_left_in_line;
if( (u8*)(startwrite +lencopy) > (u8*)(p_out_buffer+ buf->vb.size) ) {
return 0;
}
/* The below copies the UYVY data straight into video buffer */
cx231xx_swab( (u16*)p_buffer, (u16*)startwrite, (u16)lencopy);
return 0;
}
void cx231xx_swab(u16 *from, u16 *to, u16 len)
{
u16 i;
if( len <= 0)
return;
for(i = 0; i < len/2; i++) {
to[i] = (from[i] << 8) | (from[i] >> 8);
}
}
u8 cx231xx_is_buffer_done(struct cx231xx *dev,struct cx231xx_dmaqueue *dma_q)
{
u8 buffer_complete = 0;
/* Dual field stream */
buffer_complete =
((dma_q->current_field == 2) &&
(dma_q->lines_completed >= dma_q->lines_per_field) &&
dma_q->field1_done);
return buffer_complete;
}
/* ------------------------------------------------------------------
Videobuf operations
------------------------------------------------------------------*/
static int
buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
{
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
struct v4l2_frequency f;
*size = ( fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
if (0 == *count)
*count = CX231XX_DEF_BUF;
if (*count < CX231XX_MIN_BUF)
*count = CX231XX_MIN_BUF;
/* Ask tuner to go to analog mode */
memset(&f, 0, sizeof(f));
f.frequency = dev->ctl_freq;
f.type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, &f);
return 0;
}
/* This is called *without* dev->slock held; please keep it that way */
static void free_buffer(struct videobuf_queue *vq, struct cx231xx_buffer *buf)
{
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
unsigned long flags = 0;
if (in_interrupt())
BUG();
/* We used to wait for the buffer to finish here, but this didn't work
because, as we were keeping the state as VIDEOBUF_QUEUED,
videobuf_queue_cancel marked it as finished for us.
(Also, it could wedge forever if the hardware was misconfigured.)
This should be safe; by the time we get here, the buffer isn't
queued anymore. If we ever start marking the buffers as
VIDEOBUF_ACTIVE, it won't be, though.
*/
spin_lock_irqsave(&dev->video_mode.slock, flags);
if (dev->video_mode.isoc_ctl.buf == buf)
dev->video_mode.isoc_ctl.buf = NULL;
spin_unlock_irqrestore(&dev->video_mode.slock, flags);
videobuf_vmalloc_free(&buf->vb);
buf->vb.state = VIDEOBUF_NEEDS_INIT;
}
static int
buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
enum v4l2_field field)
{
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx_buffer *buf = container_of(vb, struct cx231xx_buffer, vb);
struct cx231xx *dev = fh->dev;
int rc = 0, urb_init = 0;
/* The only currently supported format is 16 bits/pixel */
buf->vb.size = (fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
return -EINVAL;
buf->vb.width = dev->width;
buf->vb.height = dev->height;
buf->vb.field = field;
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
rc = videobuf_iolock(vq, &buf->vb, NULL);
if (rc < 0)
goto fail;
}
if (!dev->video_mode.isoc_ctl.num_bufs)
urb_init = 1;
if (urb_init) {
rc = cx231xx_init_isoc(dev, CX231XX_NUM_PACKETS,
CX231XX_NUM_BUFS, dev->video_mode.max_pkt_size,
cx231xx_isoc_copy);
if (rc < 0)
goto fail;
}
buf->vb.state = VIDEOBUF_PREPARED;
return 0;
fail:
free_buffer(vq, buf);
return rc;
}
static void
buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
{
struct cx231xx_buffer *buf = container_of(vb, struct cx231xx_buffer, vb);
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
struct cx231xx_dmaqueue *vidq = &dev->video_mode.vidq;
buf->vb.state = VIDEOBUF_QUEUED;
list_add_tail(&buf->vb.queue, &vidq->active);
}
static void buffer_release(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct cx231xx_buffer *buf = container_of(vb, struct cx231xx_buffer, vb);
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = (struct cx231xx *)fh->dev;
cx231xx_isocdbg("cx231xx: called buffer_release\n");
free_buffer(vq, buf);
}
static struct videobuf_queue_ops cx231xx_video_qops = {
.buf_setup = buffer_setup,
.buf_prepare = buffer_prepare,
.buf_queue = buffer_queue,
.buf_release = buffer_release,
};
/********************* v4l2 interface **************************************/
void video_mux(struct cx231xx *dev, int index)
{
struct v4l2_routing route;
route.input = INPUT(index)->vmux;
route.output = 0;
dev->video_input = index;
dev->ctl_ainput = INPUT(index)->amux;
cx231xx_set_video_input_mux(dev,index);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_INT_S_VIDEO_ROUTING, &route);
cx231xx_set_audio_input(dev, dev->ctl_ainput );
cx231xx_info("video_mux : %d\n", index);
/* do mode control overrides if required */
cx231xx_do_mode_ctrl_overrides(dev);
}
/* Usage lock check functions */
static int res_get(struct cx231xx_fh *fh)
{
struct cx231xx *dev = fh->dev;
int rc = 0;
/* This instance already has stream_on */
if (fh->stream_on)
return rc;
if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
if (dev->stream_on)
return -EBUSY;
dev->stream_on = 1;
} else if(fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
if (dev->vbi_stream_on)
return -EBUSY;
dev->vbi_stream_on = 1;
} else
return -EINVAL;
fh->stream_on = 1;
return rc;
}
static int res_check(struct cx231xx_fh *fh)
{
return (fh->stream_on);
}
static void res_free(struct cx231xx_fh *fh)
{
struct cx231xx *dev = fh->dev;
fh->stream_on = 0;
if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
dev->stream_on = 0;
if(fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
dev->vbi_stream_on = 0;
}
static int check_dev(struct cx231xx *dev)
{
if (dev->state & DEV_DISCONNECTED) {
cx231xx_errdev("v4l2 ioctl: device not present\n");
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
cx231xx_errdev("v4l2 ioctl: device is misconfigured; "
"close and open it again\n");
return -EIO;
}
return 0;
}
void get_scale(struct cx231xx *dev,
unsigned int width, unsigned int height,
unsigned int *hscale, unsigned int *vscale)
{
unsigned int maxw = norm_maxw(dev);
unsigned int maxh = norm_maxh(dev);
*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
if (*hscale >= 0x4000)
*hscale = 0x3fff;
*vscale = (((unsigned long)maxh) << 12) / height - 4096L;
if (*vscale >= 0x4000)
*vscale = 0x3fff;
dev->hscale = *hscale;
dev->vscale = *vscale;
}
/* ------------------------------------------------------------------
IOCTL vidioc handling
------------------------------------------------------------------*/
static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
mutex_lock(&dev->lock);
f->fmt.pix.width = dev->width;
f->fmt.pix.height = dev->height;
f->fmt.pix.pixelformat = dev->format->fourcc;;
f->fmt.pix.bytesperline = (dev->width * dev->format->depth + 7) >> 3;;
f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * dev->height;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
f->fmt.pix.field = V4L2_FIELD_INTERLACED;
mutex_unlock(&dev->lock);
return 0;
}
static struct cx231xx_fmt *format_by_fourcc(unsigned int fourcc)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(format); i++)
if (format[i].fourcc == fourcc)
return &format[i];
return NULL;
}
static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int width = f->fmt.pix.width;
int height = f->fmt.pix.height;
unsigned int maxw = norm_maxw(dev);
unsigned int maxh = norm_maxh(dev);
unsigned int hscale, vscale;
struct cx231xx_fmt *fmt;
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
if (!fmt) {
cx231xx_videodbg("Fourcc format (%08x) invalid.\n",
f->fmt.pix.pixelformat);
return -EINVAL;
}
/* width must even because of the YUYV format
height must be even because of interlacing */
height &= 0xfffe;
width &= 0xfffe;
if (unlikely(height < 32))
height = 32;
if (unlikely(height > maxh))
height = maxh;
if (unlikely(width < 48))
width = 48;
if (unlikely(width > maxw))
width = maxw;
get_scale(dev, width, height, &hscale, &vscale);
width = (((unsigned long)maxw) << 12) / (hscale + 4096L);
height = (((unsigned long)maxh) << 12) / (vscale + 4096L);
f->fmt.pix.width = width;
f->fmt.pix.height = height;
f->fmt.pix.pixelformat = fmt->fourcc;
f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3;
f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
f->fmt.pix.field = V4L2_FIELD_INTERLACED;
return 0;
}
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
struct cx231xx_fmt *fmt;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
vidioc_try_fmt_vid_cap(file, priv, f);
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
if (!fmt) {
rc = -EINVAL;
goto out;
}
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
cx231xx_errdev("%s queue busy\n", __func__);
rc = -EBUSY;
goto out;
}
if (dev->stream_on && !fh->stream_on) {
cx231xx_errdev("%s device in use by another fh\n", __func__);
rc = -EBUSY;
goto out;
}
/* set new image size */
dev->width = f->fmt.pix.width;
dev->height = f->fmt.pix.height;
dev->format = fmt;
get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_S_FMT, f);
/* Set the correct alternate setting for this resolution */
cx231xx_resolution_set(dev);
out:
mutex_unlock(&dev->lock);
return rc;
}
static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
*id = dev->norm;
return 0;
}
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
struct v4l2_format f;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
cx231xx_info("vidioc_s_std : 0x%x\n", (unsigned int)*norm);
mutex_lock(&dev->lock);
dev->norm = *norm;
/* Adjusts width/height, if needed */
f.fmt.pix.width = dev->width;
f.fmt.pix.height = dev->height;
vidioc_try_fmt_vid_cap(file, priv, &f);
/* set new image size */
dev->width = f.fmt.pix.width;
dev->height = f.fmt.pix.height;
get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_S_STD, &dev->norm);
mutex_unlock(&dev->lock);
cx231xx_resolution_set(dev);
/* do mode control overrides */
cx231xx_do_mode_ctrl_overrides(dev);
return 0;
}
static const char *iname[] = {
[CX231XX_VMUX_COMPOSITE1] = "Composite1",
[CX231XX_VMUX_SVIDEO] = "S-Video",
[CX231XX_VMUX_TELEVISION] = "Television",
[CX231XX_VMUX_CABLE] = "Cable TV",
[CX231XX_VMUX_DVB] = "DVB",
[CX231XX_VMUX_DEBUG] = "for debug only",
};
static int vidioc_enum_input(struct file *file, void *priv,
struct v4l2_input *i)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
unsigned int n;
n = i->index;
if (n >= MAX_CX231XX_INPUT)
return -EINVAL;
if (0 == INPUT(n)->type)
return -EINVAL;
i->index = n;
i->type = V4L2_INPUT_TYPE_CAMERA;
strcpy(i->name, iname[INPUT(n)->type]);
if ((CX231XX_VMUX_TELEVISION == INPUT(n)->type) ||
(CX231XX_VMUX_CABLE == INPUT(n)->type))
i->type = V4L2_INPUT_TYPE_TUNER;
i->std = dev->vdev->tvnorms;
return 0;
}
static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
*i = dev->video_input;
return 0;
}
static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
if (i >= MAX_CX231XX_INPUT)
return -EINVAL;
if (0 == INPUT(i)->type)
return -EINVAL;
mutex_lock(&dev->lock);
video_mux(dev, i);
mutex_unlock(&dev->lock);
return 0;
}
static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
switch (a->index) {
case CX231XX_AMUX_VIDEO:
strcpy(a->name, "Television");
break;
case CX231XX_AMUX_LINE_IN:
strcpy(a->name, "Line In");
break;
default:
return -EINVAL;
}
a->index = dev->ctl_ainput;
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int status = 0;
/* Doesn't allow manual routing */
if (a->index != dev->ctl_ainput)
return -EINVAL;
dev->ctl_ainput = INPUT(a->index)->amux;
status = cx231xx_set_audio_input(dev, dev->ctl_ainput);
return status;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int id = qc->id;
int i;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
qc->id = v4l2_ctrl_next(ctrl_classes, qc->id);
if (unlikely(qc->id == 0))
return -EINVAL;
memset(qc, 0, sizeof(*qc));
qc->id = id;
if (qc->id < V4L2_CID_BASE ||
qc->id >= V4L2_CID_LASTP1)
return -EINVAL;
for (i = 0; i < CX231XX_CTLS; i++)
if (cx231xx_ctls[i].v.id == qc->id)
break;
if (i == CX231XX_CTLS) {
*qc = no_ctl;
return 0;
}
*qc = cx231xx_ctls[i].v;
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_QUERYCTRL, qc);
mutex_unlock(&dev->lock);
if (qc->type)
return 0;
else
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_G_CTRL, ctrl);
mutex_unlock(&dev->lock);
return rc;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_S_CTRL, ctrl);
mutex_unlock(&dev->lock);
return rc;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *t)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
if (0 != t->index)
return -EINVAL;
strcpy(t->name, "Tuner");
t->type = V4L2_TUNER_ANALOG_TV;
t->capability = V4L2_TUNER_CAP_NORM;
t->rangehigh = 0xffffffffUL;
t->signal = 0xffff ; /* LOCKED */
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *t)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
if (0 != t->index)
return -EINVAL;
#if 0
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_TUNER, t);
mutex_unlock(&dev->lock);
#endif
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
mutex_lock(&dev->lock);
f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = dev->ctl_freq;
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_G_FREQUENCY, f);
mutex_unlock(&dev->lock);
return 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
if (0 != f->tuner)
return -EINVAL;
if (unlikely(0 == fh->radio && f->type != V4L2_TUNER_ANALOG_TV))
return -EINVAL;
if (unlikely(1 == fh->radio && f->type != V4L2_TUNER_RADIO))
return -EINVAL;
/* set pre channel change settings in DIF first */
rc = cx231xx_tuner_pre_channel_change(dev);
mutex_lock(&dev->lock);
dev->ctl_freq = f->frequency;
if(dev->tuner_type == TUNER_XC5000) {
if( dev->cx231xx_set_analog_freq != NULL ) {
dev->cx231xx_set_analog_freq(dev, f->frequency );
}
} else {
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, f);
}
mutex_unlock(&dev->lock);
/* set post channel change settings in DIF first */
rc = cx231xx_tuner_post_channel_change(dev);
cx231xx_info("Set New FREQUENCY to %d\n",f->frequency);
return rc;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
/*
-R, --list-registers=type=<host/i2cdrv/i2caddr>,chip=<chip>[,min=<addr>,max=<addr>]
dump registers from <min> to <max> [VIDIOC_DBG_G_REGISTER]
-r, --set-register=type=<host/i2cdrv/i2caddr>,chip=<chip>,reg=<addr>,val=<val>
set the register [VIDIOC_DBG_S_REGISTER]
if type == host, then <chip> is the hosts chip ID (default 0)
if type == i2cdrv (default), then <chip> is the I2C driver name or ID
if type == i2caddr, then <chip> is the 7-bit I2C address
*/
static int vidioc_g_register(struct file *file, void *priv,
struct v4l2_dbg_register *reg)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int ret = 0;
u8 value[4] ={0,0,0,0};
u32 data = 0;
switch (reg->match.type) {
case V4L2_CHIP_MATCH_HOST:
switch(reg->match.addr) {
case 0: /* Cx231xx - internal registers */
ret = cx231xx_read_ctrl_reg(dev,VRT_GET_REGISTER, (u16) reg->reg, value, 4);
reg->val = value[0] | value[1] << 8 | value[2] << 16 | value[3] << 24;
break;
case 1: /* Colibri - read byte */
ret = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, (u16) reg->reg, 2, &data, 1);
reg->val = le32_to_cpu(data & 0xff);
break;
case 14: /* Colibri - read dword */
ret = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, (u16) reg->reg, 2, &data, 4);
reg->val = le32_to_cpu(data);
break;
case 2: /* Hammerhead - read byte */
ret = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, (u16) reg->reg, 2, &data, 1);
reg->val = le32_to_cpu(data & 0xff);
break;
case 24: /* Hammerhead - read dword */
ret = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, (u16) reg->reg, 2, &data, 4);
reg->val = le32_to_cpu(data);
break;
case 3: /* flatiron - read byte */
ret = cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS, (u16) reg->reg, 1, &data, 1);
reg->val = le32_to_cpu(data & 0xff);
break;
case 34: /* flatiron - read dword */
ret = cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS, (u16) reg->reg, 1, &data, 4);
reg->val = le32_to_cpu(data);
break;
}
return ret < 0?ret:0;
case V4L2_CHIP_MATCH_I2C_DRIVER:
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_DBG_G_REGISTER, reg);
return 0;
case V4L2_CHIP_MATCH_I2C_ADDR:
/* Not supported yet */
return -EINVAL;
default:
if (!v4l2_chip_match_host(&reg->match))
return -EINVAL;
}
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_DBG_G_REGISTER, reg);
mutex_unlock(&dev->lock);
return ret;
}
static int vidioc_s_register(struct file *file, void *priv,
struct v4l2_dbg_register *reg)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int ret = 0;
__le64 buf;
u32 value;
u8 data[4] ={0,0,0,0};
buf = cpu_to_le64(reg->val);
switch (reg->match.type) {
case V4L2_CHIP_MATCH_HOST:
{
value = (u32) buf & 0xffffffff;
switch(reg->match.addr) {
case 0: /* cx231xx internal registers */
data[0]=(u8)value;
data[1]=(u8)(value>>8);
data[2]=(u8)(value>>16);
data[3]=(u8)(value>>24);
ret = cx231xx_write_ctrl_reg(dev,VRT_SET_REGISTER, (u16) reg->reg, data, 4);
break;
case 1: /* Colibri - read byte */
ret = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, (u16) reg->reg, 2, value, 1);
break;
case 14: /* Colibri - read dword */
ret = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, (u16) reg->reg, 2, value, 4);
break;
case 2: /* Hammerhead - read byte */
ret = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, (u16) reg->reg, 2, value, 1);
break;
case 24: /* Hammerhead - read dword */
ret = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, (u16) reg->reg, 2, value, 4);
break;
case 3: /* flatiron - read byte */
ret = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS, (u16) reg->reg, 1, value, 1);
break;
case 34: /* flatiron - read dword */
ret = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS, (u16) reg->reg, 1, value, 4);
break;
}
}
return ret < 0?ret:0;
default:
break;
}
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_DBG_S_REGISTER, reg);
mutex_unlock(&dev->lock);
return ret;
}
#endif
static int vidioc_cropcap(struct file *file, void *priv,
struct v4l2_cropcap *cc)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
cc->bounds.left = 0;
cc->bounds.top = 0;
cc->bounds.width = dev->width;
cc->bounds.height = dev->height;
cc->defrect = cc->bounds;
cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */
cc->pixelaspect.denominator = 59;
return 0;
}
static int vidioc_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
rc = res_get(fh);
if (likely(rc >= 0))
rc = videobuf_streamon(&fh->vb_vidq);
mutex_unlock(&dev->lock);
return rc;
}
static int vidioc_streamoff(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
if ( (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ||
(fh->type != V4L2_BUF_TYPE_VBI_CAPTURE) )
return -EINVAL;
if (type != fh->type)
return -EINVAL;
mutex_lock(&dev->lock);
videobuf_streamoff(&fh->vb_vidq);
res_free(fh);
mutex_unlock(&dev->lock);
return 0;
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
strlcpy(cap->driver, "cx231xx", sizeof(cap->driver));
strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card));
strlcpy(cap->bus_info, dev_name(&dev->udev->dev), sizeof(cap->bus_info));
cap->version = CX231XX_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VBI_CAPTURE |
#if 0
V4L2_CAP_SLICED_VBI_CAPTURE |
#endif
V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_AUDIO |
V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
if (dev->tuner_type != TUNER_ABSENT)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
}
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_fmtdesc *f)
{
if (unlikely(f->index >= ARRAY_SIZE(format)))
return -EINVAL;
strlcpy(f->description, format[f->index].name, sizeof(f->description));
f->pixelformat = format[f->index].fourcc;
return 0;
}
/* Sliced VBI ioctls */
static int vidioc_g_fmt_sliced_vbi_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
f->fmt.sliced.service_set = 0;
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_G_FMT, f);
if (f->fmt.sliced.service_set == 0)
rc = -EINVAL;
mutex_unlock(&dev->lock);
return rc;
}
static int vidioc_try_set_sliced_vbi_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_G_FMT, f);
mutex_unlock(&dev->lock);
if (f->fmt.sliced.service_set == 0)
return -EINVAL;
return 0;
}
/* RAW VBI ioctls */
static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
f->fmt.vbi.sampling_rate = (dev->norm & V4L2_STD_625_50) ?
35468950:28636363;
f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
f->fmt.vbi.offset = 64 * 4;
f->fmt.vbi.start[0] = (dev->norm & V4L2_STD_625_50) ?
PAL_VBI_START_LINE : NTSC_VBI_START_LINE;
f->fmt.vbi.count[0] = (dev->norm & V4L2_STD_625_50) ?
PAL_VBI_LINES : NTSC_VBI_LINES;
f->fmt.vbi.start[1] = (dev->norm & V4L2_STD_625_50) ?
PAL_VBI_START_LINE+312 : NTSC_VBI_START_LINE + 263;
f->fmt.vbi.count[1] = f->fmt.vbi.count[0];
return 0;
}
static int vidioc_try_fmt_vbi_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
if (dev->vbi_stream_on && !fh->stream_on) {
cx231xx_errdev("%s device in use by another fh\n", __func__);
return -EBUSY;
}
f->type = V4L2_BUF_TYPE_VBI_CAPTURE;
f->fmt.vbi.sampling_rate = (dev->norm & V4L2_STD_625_50) ?
35468950:28636363;
f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
f->fmt.vbi.offset = 244;
f->fmt.vbi.flags = 0;
f->fmt.vbi.start[0] = (dev->norm & V4L2_STD_625_50) ?
PAL_VBI_START_LINE : NTSC_VBI_START_LINE;
f->fmt.vbi.count[0] = (dev->norm & V4L2_STD_625_50) ?
PAL_VBI_LINES : NTSC_VBI_LINES;
f->fmt.vbi.start[1] = (dev->norm & V4L2_STD_625_50) ?
PAL_VBI_START_LINE+312 : NTSC_VBI_START_LINE + 263;
f->fmt.vbi.count[1] = f->fmt.vbi.count[0];
return 0;
}
static int vidioc_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *rb)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
return (videobuf_reqbufs(&fh->vb_vidq, rb));
}
static int vidioc_querybuf(struct file *file, void *priv,
struct v4l2_buffer *b)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
return (videobuf_querybuf(&fh->vb_vidq, b));
}
static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
return (videobuf_qbuf(&fh->vb_vidq, b));
}
static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
return (videobuf_dqbuf(&fh->vb_vidq, b,
file->f_flags & O_NONBLOCK));
}
#ifdef CONFIG_VIDEO_V4L1_COMPAT
static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
{
struct cx231xx_fh *fh = priv;
return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
}
#endif
/* ----------------------------------------------------------- */
/* RADIO ESPECIFIC IOCTLS */
/* ----------------------------------------------------------- */
static int radio_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
struct cx231xx *dev = ((struct cx231xx_fh *)priv)->dev;
strlcpy(cap->driver, "cx231xx", sizeof(cap->driver));
strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card));
usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
cap->version = CX231XX_VERSION_CODE;
cap->capabilities = V4L2_CAP_TUNER;
return 0;
}
static int radio_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *t)
{
struct cx231xx *dev = ((struct cx231xx_fh *)priv)->dev;
if (unlikely(t->index > 0))
return -EINVAL;
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_G_TUNER, t);
mutex_unlock(&dev->lock);
return 0;
}
static int radio_enum_input(struct file *file, void *priv,
struct v4l2_input *i)
{
if (i->index != 0)
return -EINVAL;
strcpy(i->name, "Radio");
i->type = V4L2_INPUT_TYPE_TUNER;
return 0;
}
static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
{
if (unlikely(a->index))
return -EINVAL;
strcpy(a->name, "Radio");
return 0;
}
static int radio_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *t)
{
struct cx231xx *dev = ((struct cx231xx_fh *)priv)->dev;
if (0 != t->index)
return -EINVAL;
mutex_lock(&dev->lock);
cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_TUNER, t);
mutex_unlock(&dev->lock);
return 0;
}
static int radio_s_audio(struct file *file, void *fh,
struct v4l2_audio *a)
{
return 0;
}
static int radio_s_input(struct file *file, void *fh, unsigned int i)
{
return 0;
}
static int radio_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *c)
{
int i;
if (c->id < V4L2_CID_BASE ||
c->id >= V4L2_CID_LASTP1)
return -EINVAL;
if (c->id == V4L2_CID_AUDIO_MUTE) {
for (i = 0; i < CX231XX_CTLS; i++)
if (cx231xx_ctls[i].v.id == c->id)
break;
*c = cx231xx_ctls[i].v;
} else
*c = no_ctl;
return 0;
}
/*
* cx231xx_v4l2_open()
* inits the device and starts isoc transfer
*/
static int cx231xx_v4l2_open(struct file *filp)
{
int minor = video_devdata(filp)->minor;
int errCode = 0, radio = 0;
struct cx231xx *dev = NULL;
struct cx231xx_fh *fh;
enum v4l2_buf_type fh_type = 0;
dev = cx231xx_get_device(minor, &fh_type, &radio);
if (NULL == dev)
return -ENODEV;
mutex_lock(&dev->lock);
cx231xx_videodbg("open minor=%d type=%s users=%d\n",
minor, v4l2_type_names[fh_type], dev->users);
#if 0
errCode = cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
if (errCode < 0) {
cx231xx_errdev("Device locked on digital mode. Can't open analog\n");
mutex_unlock(&dev->lock);
return -EBUSY;
}
#endif
fh = kzalloc(sizeof(struct cx231xx_fh), GFP_KERNEL);
if (!fh) {
cx231xx_errdev("cx231xx-video.c: Out of memory?!\n");
mutex_unlock(&dev->lock);
return -ENOMEM;
}
fh->dev = dev;
fh->radio = radio;
fh->type = fh_type;
filp->private_data = fh;
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
dev->width = norm_maxw(dev);
dev->height = norm_maxh(dev);
dev->hscale = 0;
dev->vscale = 0;
/* Power up in Analog TV mode */
cx231xx_set_power_mode(dev, POLARIS_AVMODE_ANALOGT_TV);
#if 0
cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
#endif
cx231xx_resolution_set(dev);
/* set video alternate setting */
cx231xx_set_video_alternate(dev);
/* Needed, since GPIO might have disabled power of
some i2c device */
cx231xx_config_i2c(dev);
/* device needs to be initialized before isoc transfer */
dev->video_input = dev->video_input > 2 ? 2: dev->video_input;
video_mux(dev, dev->video_input );
}
if (fh->radio) {
cx231xx_videodbg("video_open: setting radio device\n");
/* cx231xx_start_radio(dev); */
cx231xx_i2c_call_clients(&dev->i2c_bus[1], AUDC_SET_RADIO, NULL);
}
dev->users++;
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_video_qops,
NULL, &dev->video_mode.slock, fh->type, V4L2_FIELD_INTERLACED, /* V4L2_FIELD_SEQ_TB, */
sizeof(struct cx231xx_buffer), fh);
}
if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
/* Set the required alternate setting VBI interface works in Bulk mode only */
cx231xx_set_alt_setting(dev, INDEX_VANC, 0);
videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_vbi_qops,
NULL, &dev->vbi_mode.slock, fh->type, V4L2_FIELD_SEQ_TB, /* V4L2_FIELD_INTERLACED, */
sizeof(struct cx231xx_buffer), fh);
}
mutex_unlock(&dev->lock);
return errCode;
}
/*
* cx231xx_realease_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconected or at module unload
*/
void cx231xx_release_analog_resources(struct cx231xx *dev)
{
/*FIXME: I2C IR should be disconnected */
if (dev->radio_dev) {
if (-1 != dev->radio_dev->minor)
video_unregister_device(dev->radio_dev);
else
video_device_release(dev->radio_dev);
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
cx231xx_info("V4L2 device /dev/vbi%d deregistered\n",
dev->vbi_dev->num);
if (-1 != dev->vbi_dev->minor)
video_unregister_device(dev->vbi_dev);
else
video_device_release(dev->vbi_dev);
dev->vbi_dev = NULL;
}
if (dev->vdev) {
cx231xx_info("V4L2 device /dev/video%d deregistered\n",
dev->vdev->num);
if (-1 != dev->vdev->minor)
video_unregister_device(dev->vdev);
else
video_device_release(dev->vdev);
dev->vdev = NULL;
}
}
/*
* cx231xx_v4l2_close()
* stops streaming and deallocates all resources allocated by the v4l2
* calls and ioctls
*/
static int cx231xx_v4l2_close(struct file *filp)
{
struct cx231xx_fh *fh = filp->private_data;
struct cx231xx *dev = fh->dev;
cx231xx_videodbg("users=%d\n", dev->users);
mutex_lock(&dev->lock);
if (res_check(fh))
res_free(fh);
if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
videobuf_stop(&fh->vb_vidq);
videobuf_mmap_free(&fh->vb_vidq);
/* the device is already disconnect,
free the remaining resources */
if (dev->state & DEV_DISCONNECTED) {
cx231xx_release_resources(dev);
mutex_unlock(&dev->lock);
kfree(dev);
return 0;
}
/* do this before setting alternate! */
cx231xx_uninit_vbi_isoc(dev);
/* set alternate 0 */
if( !dev->vbi_or_sliced_cc_mode) {
cx231xx_set_alt_setting(dev, INDEX_VANC, 0);
} else {
cx231xx_set_alt_setting(dev, INDEX_HANC, 0);
}
kfree(fh);
dev->users--;
wake_up_interruptible_nr(&dev->open, 1);
mutex_unlock(&dev->lock);
return 0;
}
if (dev->users == 1) {
videobuf_stop(&fh->vb_vidq);
videobuf_mmap_free(&fh->vb_vidq);
/* the device is already disconnect,
free the remaining resources */
if (dev->state & DEV_DISCONNECTED) {
cx231xx_release_resources(dev);
mutex_unlock(&dev->lock);
kfree(dev);
return 0;
}
/* Save some power by putting tuner to sleep */
cx231xx_i2c_call_clients(&dev->i2c_bus[1], TUNER_SET_STANDBY, NULL);
/* do this before setting alternate! */
cx231xx_uninit_isoc(dev);
cx231xx_set_mode(dev, CX231XX_SUSPEND);
/* set alternate 0 */
cx231xx_set_alt_setting(dev, INDEX_VIDEO, 0);
}
kfree(fh);
dev->users--;
wake_up_interruptible_nr(&dev->open, 1);
mutex_unlock(&dev->lock);
return 0;
}
/*
* cx231xx_v4l2_read()
* will allocate buffers when called for the first time
*/
static ssize_t
cx231xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
loff_t *pos)
{
struct cx231xx_fh *fh = filp->private_data;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
if ( (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) ||
(fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) ) {
mutex_lock(&dev->lock);
rc = res_get(fh);
mutex_unlock(&dev->lock);
if (unlikely(rc < 0))
return rc;
return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,
filp->f_flags & O_NONBLOCK);
}
return 0;
}
/*
* cx231xx_v4l2_poll()
* will allocate buffers when called for the first time
*/
static unsigned int cx231xx_v4l2_poll(struct file *filp, poll_table * wait)
{
struct cx231xx_fh *fh = filp->private_data;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
rc = res_get(fh);
mutex_unlock(&dev->lock);
if (unlikely(rc < 0))
return POLLERR;
if ( (V4L2_BUF_TYPE_VIDEO_CAPTURE == fh->type) ||
(V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) )
return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
else
return POLLERR;
}
/*
* cx231xx_v4l2_mmap()
*/
static int cx231xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
{
struct cx231xx_fh *fh = filp->private_data;
struct cx231xx *dev = fh->dev;
int rc;
rc = check_dev(dev);
if (rc < 0)
return rc;
mutex_lock(&dev->lock);
rc = res_get(fh);
mutex_unlock(&dev->lock);
if (unlikely(rc < 0))
return rc;
rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
cx231xx_videodbg("vma start=0x%08lx, size=%ld, ret=%d\n",
(unsigned long)vma->vm_start,
(unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
rc);
return rc;
}
static const struct v4l2_file_operations cx231xx_v4l_fops = {
.owner = THIS_MODULE,
.open = cx231xx_v4l2_open,
.release = cx231xx_v4l2_close,
.read = cx231xx_v4l2_read,
.poll = cx231xx_v4l2_poll,
.mmap = cx231xx_v4l2_mmap,
.ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
.vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
.vidioc_try_fmt_vbi_cap = vidioc_try_fmt_vbi_cap,
.vidioc_s_fmt_vbi_cap = vidioc_try_fmt_vbi_cap,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_cropcap = vidioc_cropcap,
.vidioc_g_fmt_sliced_vbi_cap = vidioc_g_fmt_sliced_vbi_cap,
.vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap,
.vidioc_reqbufs = vidioc_reqbufs,
.vidioc_querybuf = vidioc_querybuf,
.vidioc_qbuf = vidioc_qbuf,
.vidioc_dqbuf = vidioc_dqbuf,
.vidioc_s_std = vidioc_s_std,
.vidioc_g_std = vidioc_g_std,
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_streamon = vidioc_streamon,
.vidioc_streamoff = vidioc_streamoff,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.vidioc_g_register = vidioc_g_register,
.vidioc_s_register = vidioc_s_register,
#endif
#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
};
static struct video_device cx231xx_vbi_template;
static const struct video_device cx231xx_video_template = {
.fops = &cx231xx_v4l_fops,
.release = video_device_release,
.ioctl_ops = &video_ioctl_ops,
.minor = -1,
.tvnorms = V4L2_STD_ALL,
.current_norm = V4L2_STD_PAL,
};
static const struct v4l2_file_operations radio_fops = {
.owner = THIS_MODULE,
.open = cx231xx_v4l2_open,
.release = cx231xx_v4l2_close,
.ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops radio_ioctl_ops = {
.vidioc_querycap = radio_querycap,
.vidioc_g_tuner = radio_g_tuner,
.vidioc_enum_input = radio_enum_input,
.vidioc_g_audio = radio_g_audio,
.vidioc_s_tuner = radio_s_tuner,
.vidioc_s_audio = radio_s_audio,
.vidioc_s_input = radio_s_input,
.vidioc_queryctrl = radio_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.vidioc_g_register = vidioc_g_register,
.vidioc_s_register = vidioc_s_register,
#endif
};
static struct video_device cx231xx_radio_template = {
.name = "cx231xx-radio",
.fops = &radio_fops,
.ioctl_ops = &radio_ioctl_ops,
.minor = -1,
};
/******************************** usb interface ******************************/
static struct video_device *cx231xx_vdev_init(struct cx231xx *dev,
const struct video_device *template,
const char *type_name)
{
struct video_device *vfd;
vfd = video_device_alloc();
if (NULL == vfd)
return NULL;
*vfd = *template;
vfd->minor = -1;
vfd->parent = &dev->udev->dev;
vfd->release = video_device_release;
vfd->debug = video_debug;
snprintf(vfd->name, sizeof(vfd->name), "%s %s",
dev->name, type_name);
return vfd;
}
int cx231xx_register_analog_devices(struct cx231xx *dev)
{
int ret;
cx231xx_info("%s()\n", __func__);
cx231xx_info("%s: v4l2 driver version %d.%d.%d\n",
dev->name,
(CX231XX_VERSION_CODE >> 16) & 0xff,
(CX231XX_VERSION_CODE >> 8) & 0xff, CX231XX_VERSION_CODE & 0xff);
/* set default norm */
/*dev->norm = cx231xx_video_template.current_norm;*/
dev->width = norm_maxw(dev);
dev->height = norm_maxh(dev);
dev->interlaced = 0;
dev->hscale = 0;
dev->vscale = 0;
/* Analog specific initialization */
dev->format = &format[0];
/* video_mux(dev, dev->video_input); */
/* Audio defaults */
dev->mute = 1;
dev->volume = 0x1f;
/* enable vbi capturing */
/* write code here... */
/* allocate and fill video video_device struct */
dev->vdev = cx231xx_vdev_init(dev, &cx231xx_video_template, "video");
if (!dev->vdev) {
cx231xx_errdev("cannot allocate video_device.\n");
return -ENODEV;
}
/* register v4l2 video video_device */
ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]);
if (ret) {
cx231xx_errdev("unable to register video device (error=%i).\n", ret);
return ret;
}
cx231xx_info("%s/0: registered device video%d [v4l2]\n",
dev->name, dev->vdev->num);
/* Initialize VBI template */
memcpy( &cx231xx_vbi_template, &cx231xx_video_template,
sizeof(cx231xx_vbi_template) );
strcpy(cx231xx_vbi_template.name,"cx231xx-vbi");
/* Allocate and fill vbi video_device struct */
dev->vbi_dev = cx231xx_vdev_init(dev, &cx231xx_vbi_template, "vbi");
/* register v4l2 vbi video_device */
ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]);
if (ret < 0) {
cx231xx_errdev("unable to register vbi device\n");
return ret;
}
cx231xx_info("%s/0: registered device vbi%d\n",
dev->name, dev->vbi_dev->num);
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template, "radio");
if (!dev->radio_dev) {
cx231xx_errdev("cannot allocate video_device.\n");
return -ENODEV;
}
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
cx231xx_errdev("can't register radio device\n");
return ret;
}
cx231xx_info("Registered radio device as /dev/radio%d\n",
dev->radio_dev->num);
}
cx231xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
dev->vdev->num, dev->vbi_dev->num);
return 0;
}
/*
cx231xx.h - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _CX231XX_H
#define _CX231XX_H
#include <linux/videodev2.h>
#include <media/videobuf-vmalloc.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/mutex.h>
#include <media/ir-kbd-i2c.h>
#if defined(CONFIG_VIDEO_CX231XX_DVB) || defined(CONFIG_VIDEO_CX231XX_DVB_MODULE)
#include <media/videobuf-dvb.h>
#endif
#include "cx231xx-reg.h"
#include "cx231xx-pcb-config.h"
#include "cx231xx-conf-reg.h"
#define CX231XX_VERSION_CODE KERNEL_VERSION(0, 1, 0)
#define DRIVER_NAME "cx231xx"
#define PWR_SLEEP_INTERVAL 5
/* I2C addresses for control block in Cx231xx */
#define Colibri_DEVICE_ADDRESS 0x60
#define Flatrion_DEVICE_ADDRESS 0x98
#define HAMMERHEAD_I2C_ADDRESS 0x88
#define DIF_USE_BASEBAND 0xFFFFFFFF
/* Boards supported by driver */
#define CX231XX_BOARD_UNKNOWN 0
#define CX231XX_BOARD_CNXT_RDE_250 1
#define CX231XX_BOARD_CNXT_RDU_250 2
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
#define CX231XX_DEF_BUF 12
#define CX231XX_DEF_VBI_BUF 6
#define VBI_LINE_COUNT 17
#define VBI_LINE_LENGTH 1440
/*Limits the max URB message size */
#define URB_MAX_CTRL_SIZE 80
/* Params for validated field */
#define CX231XX_BOARD_NOT_VALIDATED 1
#define CX231XX_BOARD_VALIDATED 0
/* maximum number of cx231xx boards */
#define CX231XX_MAXBOARDS 8
/* maximum number of frames that can be queued */
#define CX231XX_NUM_FRAMES 5
/* number of buffers for isoc transfers */
#define CX231XX_NUM_BUFS 8
/* number of packets for each buffer
windows requests only 40 packets .. so we better do the same
this is what I found out for all alternate numbers there!
*/
#define CX231XX_NUM_PACKETS 40
/* default alternate; 0 means choose the best */
#define CX231XX_PINOUT 0
#define CX231XX_INTERLACED_DEFAULT 1
/* time to wait when stopping the isoc transfer */
#define CX231XX_URB_TIMEOUT msecs_to_jiffies(CX231XX_NUM_BUFS * CX231XX_NUM_PACKETS)
enum cx231xx_mode {
CX231XX_SUSPEND,
CX231XX_ANALOG_MODE,
CX231XX_DIGITAL_MODE,
};
enum cx231xx_std_mode {
CX231XX_TV_AIR = 0,
CX231XX_TV_CABLE
};
enum cx231xx_stream_state {
STREAM_OFF,
STREAM_INTERRUPT,
STREAM_ON,
};
struct cx231xx;
struct cx231xx_usb_isoc_ctl {
/* max packet size of isoc transaction */
int max_pkt_size;
/* number of allocated urbs */
int num_bufs;
/* urb for isoc transfers */
struct urb **urb;
/* transfer buffers for isoc transfer */
char **transfer_buffer;
/* Last buffer command and region */
u8 cmd;
int pos, size, pktsize;
/* Last field: ODD or EVEN? */
int field;
/* Stores incomplete commands */
u32 tmp_buf;
int tmp_buf_len;
/* Stores already requested buffers */
struct cx231xx_buffer *buf;
/* Stores the number of received fields */
int nfields;
/* isoc urb callback */
int (*isoc_copy) (struct cx231xx *dev, struct urb *urb);
};
struct cx231xx_fmt {
char *name;
u32 fourcc; /* v4l2 format id */
int depth;
int reg;
};
/* buffer for one video frame */
struct cx231xx_buffer {
/* common v4l buffer stuff -- must be first */
struct videobuf_buffer vb;
struct list_head frame;
int top_field;
int receiving;
};
struct cx231xx_dmaqueue {
struct list_head active;
struct list_head queued;
wait_queue_head_t wq;
/* Counters to control buffer fill */
int pos;
u8 is_partial_line;
u8 partial_buf[8];
u8 last_sav;
int current_field;
u32 bytes_left_in_line;
u32 lines_completed;
u8 field1_done;
u32 lines_per_field;
};
/* inputs */
#define MAX_CX231XX_INPUT 4
enum cx231xx_itype {
CX231XX_VMUX_COMPOSITE1 = 1,
CX231XX_VMUX_SVIDEO,
CX231XX_VMUX_TELEVISION,
CX231XX_VMUX_CABLE,
CX231XX_RADIO,
CX231XX_VMUX_DVB,
CX231XX_VMUX_DEBUG
};
enum cx231xx_v_input {
CX231XX_VIN_1_1 = 0x1,
CX231XX_VIN_2_1,
CX231XX_VIN_3_1,
CX231XX_VIN_4_1,
CX231XX_VIN_1_2 = 0x01,
CX231XX_VIN_2_2,
CX231XX_VIN_3_2,
CX231XX_VIN_1_3 = 0x1,
CX231XX_VIN_2_3,
CX231XX_VIN_3_3,
};
/* cx231xx has two audio inputs: tuner and line in */
enum cx231xx_amux {
/* This is the only entry for cx231xx tuner input */
CX231XX_AMUX_VIDEO, /* cx231xx tuner*/
CX231XX_AMUX_LINE_IN, /* Line In */
};
struct cx231xx_reg_seq {
unsigned char bit;
unsigned char val;
int sleep;
};
struct cx231xx_input {
enum cx231xx_itype type;
unsigned int vmux;
enum cx231xx_amux amux;
struct cx231xx_reg_seq *gpio;
};
#define INPUT(nr) (&cx231xx_boards[dev->model].input[nr])
enum cx231xx_decoder {
CX231XX_NODECODER,
CX231XX_AVDECODER
};
typedef enum _I2C_MASTER_PORT
{
I2C_0 =0,
I2C_1 =1,
I2C_2 =2,
I2C_3 =3
}CX231XX_I2C_MASTER_PORT;
struct cx231xx_board {
char *name;
int vchannels;
int tuner_type;
int tuner_addr;
v4l2_std_id norm; /* tv norm */
/* demod related */
int demod_addr;
u8 demod_xfer_mode; /* 0 - Serial; 1 - parallel */
/* GPIO Pins */
struct cx231xx_reg_seq *dvb_gpio;
struct cx231xx_reg_seq *suspend_gpio;
struct cx231xx_reg_seq *tuner_gpio;
u8 tuner_sif_gpio;
u8 tuner_scl_gpio;
u8 tuner_sda_gpio;
/* PIN ctrl */
u32 ctl_pin_status_mask;
u8 agc_analog_digital_select_gpio;
u32 gpio_pin_status_mask;
/* i2c masters */
u8 tuner_i2c_master;
u8 demod_i2c_master;
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int valid:1;
unsigned char xclk, i2c_speed;
enum cx231xx_decoder decoder;
struct cx231xx_input input[MAX_CX231XX_INPUT];
struct cx231xx_input radio;
IR_KEYTAB_TYPE *ir_codes;
};
/* device states */
enum cx231xx_dev_state {
DEV_INITIALIZED = 0x01,
DEV_DISCONNECTED = 0x02,
DEV_MISCONFIGURED = 0x04,
};
enum AFE_MODE
{
AFE_MODE_LOW_IF,
AFE_MODE_BASEBAND,
AFE_MODE_EU_HI_IF,
AFE_MODE_US_HI_IF,
AFE_MODE_JAPAN_HI_IF
};
enum AUDIO_INPUT
{
AUDIO_INPUT_MUTE,
AUDIO_INPUT_LINE,
AUDIO_INPUT_TUNER_TV,
AUDIO_INPUT_SPDIF,
AUDIO_INPUT_TUNER_FM
};
#define CX231XX_AUDIO_BUFS 5
#define CX231XX_NUM_AUDIO_PACKETS 64
#define CX231XX_CAPTURE_STREAM_EN 1
#define CX231XX_STOP_AUDIO 0
#define CX231XX_START_AUDIO 1
/* cx231xx extensions */
#define CX231XX_AUDIO 0x10
#define CX231XX_DVB 0x20
struct cx231xx_audio {
char name[50];
char *transfer_buffer[CX231XX_AUDIO_BUFS];
struct urb *urb[CX231XX_AUDIO_BUFS];
struct usb_device *udev;
unsigned int capture_transfer_done;
struct snd_pcm_substream *capture_pcm_substream;
unsigned int hwptr_done_capture;
struct snd_card *sndcard;
int users, shutdown;
enum cx231xx_stream_state capture_stream;
spinlock_t slock;
int alt; /* alternate */
int max_pkt_size; /* max packet size of isoc transaction */
int num_alt; /* Number of alternative settings */
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
u16 end_point_addr;
};
struct cx231xx;
struct cx231xx_fh {
struct cx231xx *dev;
unsigned int stream_on:1; /* Locks streams */
int radio;
struct videobuf_queue vb_vidq;
enum v4l2_buf_type type;
};
/**********************************************************************************/
/* set/get i2c */
#define I2C_SPEED_1M 0x0 /* 00--1Mb/s, 01-400kb/s, 10--100kb/s, 11--5Mb/s */
#define I2C_SPEED_400K 0x1 /* 00--1Mb/s, 01-400kb/s, 10--100kb/s, 11--5Mb/s */
#define I2C_SPEED_100K 0x2 /* 00--1Mb/s, 01-400kb/s, 10--100kb/s, 11--5Mb/s */
#define I2C_SPEED_5M 0x3 /* 00--1Mb/s, 01-400kb/s, 10--100kb/s, 11--5Mb/s */
#define I2C_STOP 0x0 /* 0-- STOP transaction */
#define I2C_NOSTOP 0x1 /* 1-- do not transmit STOP at end of transaction */
#define I2C_SYNC 0x1 /* 1--alllow slave to insert clock wait states */
struct cx231xx_i2c {
struct cx231xx *dev;
int nr;
/* i2c i/o */
struct i2c_adapter i2c_adap;
struct i2c_algo_bit_data i2c_algo;
struct i2c_client i2c_client;
u32 i2c_rc;
/* different settings for each bus */
u8 i2c_period;
u8 i2c_nostop;
u8 i2c_reserve;
};
struct cx231xx_i2c_xfer_data{
u8 dev_addr;
u8 direction; /* 1 - IN, 0 - OUT */
u8 saddr_len; /* sub address len */
u16 saddr_dat; /* sub addr data */
u8 buf_size; /* buffer size */
u8* p_buffer; /* pointer to the buffer */
};
typedef struct _VENDOR_REQUEST_IN
{
u8 bRequest;
u16 wValue;
u16 wIndex;
u16 wLength;
u8 direction;
u8 bData;
u8 *pBuff;
} VENDOR_REQUEST_IN, *PVENDOR_REQUEST_IN;
struct cx231xx_ctrl {
struct v4l2_queryctrl v;
u32 off;
u32 reg;
u32 mask;
u32 shift;
};
typedef enum{
Raw_Video = 0,
Audio,
Vbi, /* VANC */
Sliced_cc, /* HANC */
TS1_serial_mode,
TS2,
TS1_parallel_mode
}TRANSFER_TYPE;
struct cx231xx_video_mode {
/* Isoc control struct */
struct cx231xx_dmaqueue vidq;
struct cx231xx_usb_isoc_ctl isoc_ctl;
spinlock_t slock;
/* usb transfer */
int alt; /* alternate */
int max_pkt_size; /* max packet size of isoc transaction */
int num_alt; /* Number of alternative settings */
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
u16 end_point_addr;
};
/* main device struct */
struct cx231xx {
/* generic device properties */
char name[30]; /* name (including minor) of the device */
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
struct cx231xx_board board;
unsigned int stream_on:1; /* Locks streams */
unsigned int vbi_stream_on:1; /* Locks streams for VBI */
unsigned int has_audio_class:1;
unsigned int has_alsa_audio:1;
struct cx231xx_fmt *format;
struct cx231xx_IR *ir;
struct list_head devlist;
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
/* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
struct cx231xx_i2c i2c_bus[3];
unsigned int xc_fw_load_done:1;
struct mutex gpio_i2c_lock;
/* video for linux */
int users; /* user count for exclusive use */
struct video_device *vdev; /* video for linux device struct */
v4l2_std_id norm; /* selected tv norm */
int ctl_freq; /* selected frequency */
unsigned int ctl_ainput; /* selected audio input */
int mute;
int volume;
/* frame properties */
int width; /* current frame width */
int height; /* current frame height */
unsigned hscale; /* horizontal scale factor (see datasheet) */
unsigned vscale; /* vertical scale factor (see datasheet) */
int interlaced; /* 1=interlace fileds, 0=just top fileds */
struct cx231xx_audio adev;
/* states */
enum cx231xx_dev_state state;
struct work_struct request_module_wk;
/* locks */
struct mutex lock;
struct mutex ctrl_urb_lock; /* protects urb_buf */
struct list_head inqueue, outqueue;
wait_queue_head_t open, wait_frame, wait_stream;
struct video_device *vbi_dev;
struct video_device *radio_dev;
unsigned char eedata[256];
struct cx231xx_video_mode video_mode;
struct cx231xx_video_mode vbi_mode;
struct cx231xx_video_mode sliced_cc_mode;
struct cx231xx_video_mode ts1_mode;
struct usb_device *udev; /* the usb device */
char urb_buf[URB_MAX_CTRL_SIZE];/* urb control msg buffer */
/* helper funcs that call usb_control_msg */
int (*cx231xx_read_ctrl_reg) (struct cx231xx *dev, u8 req, u16 reg,
char *buf, int len);
int (*cx231xx_write_ctrl_reg)(struct cx231xx *dev, u8 req, u16 reg,
char *buf, int len);
int (*cx231xx_send_usb_command)(struct cx231xx_i2c *i2c_bus,
struct cx231xx_i2c_xfer_data *req_data);
int (*cx231xx_gpio_i2c_read)(struct cx231xx *dev, u8 dev_addr, u8 *buf ,u8 len);
int (*cx231xx_gpio_i2c_write)(struct cx231xx *dev, u8 dev_addr, u8 *buf ,u8 len);
int (*cx231xx_set_analog_freq)(struct cx231xx *dev, u32 freq ) ;
int (*cx231xx_reset_analog_tuner)(struct cx231xx *dev) ;
enum cx231xx_mode mode;
struct cx231xx_dvb *dvb;
/* Cx231xx supported PCB config's */
struct pcb_config current_pcb_config;
u8 current_scenario_idx;
u8 interface_count;
u8 max_iad_interface_count;
/* GPIO related register direction and values */
u32 gpio_dir;
u32 gpio_val;
/* Power Modes */
int power_mode;
/* colibri parameters */
enum AFE_MODE colibri_mode;
u32 colibri_ref_count;
/* video related parameters */
u32 video_input;
u32 active_mode;
u8 vbi_or_sliced_cc_mode; /* 0 - vbi ; 1 - sliced cc mode */
enum cx231xx_std_mode std_mode; /* 0 - Air; 1 - cable */
};
struct cx231xx_ops {
struct list_head next;
char *name;
int id;
int (*init)(struct cx231xx *);
int (*fini)(struct cx231xx *);
};
/* call back functions in dvb module */
int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq ) ;
int cx231xx_reset_analog_tuner(struct cx231xx *dev) ;
/* Provided by cx231xx-i2c.c */
void cx231xx_i2c_call_clients(struct cx231xx_i2c *bus, unsigned int cmd, void *arg);
void cx231xx_do_i2c_scan(struct cx231xx *dev, struct i2c_client *c);
int cx231xx_i2c_register(struct cx231xx_i2c *bus);
int cx231xx_i2c_unregister(struct cx231xx_i2c *bus);
/* Internal block control functions */
int cx231xx_read_i2c_data(struct cx231xx *dev, u8 dev_addr,
u16 saddr, u8 saddr_len, u32 *data, u8 data_len);
int cx231xx_write_i2c_data(struct cx231xx *dev, u8 dev_addr,
u16 saddr, u8 saddr_len, u32 data, u8 data_len);
int cx231xx_reg_mask_write(struct cx231xx *dev, u8 dev_addr, u8 size, u16 register_address,
u8 bit_start,u8 bit_end, u32 value);
int cx231xx_read_modify_write_i2c_dword(struct cx231xx *dev, u8 dev_addr,
u16 saddr, u32 mask, u32 value);
u32 cx231xx_set_field(u32 field_mask, u32 data);
/* Colibri related functions */
int cx231xx_colibri_init_super_block(struct cx231xx *dev, u32 ref_count);
int cx231xx_colibri_init_channels(struct cx231xx *dev);
int cx231xx_colibri_setup_AFE_for_baseband(struct cx231xx *dev);
int cx231xx_colibri_set_input_mux(struct cx231xx *dev, u32 input_mux);
int cx231xx_colibri_set_mode(struct cx231xx *dev, enum AFE_MODE mode);
int cx231xx_colibri_update_power_control(struct cx231xx *dev, AV_MODE avmode);
int cx231xx_colibri_adjust_ref_count(struct cx231xx *dev, u32 video_input);
/* flatiron related functions */
int cx231xx_flatiron_initialize(struct cx231xx *dev);
int cx231xx_flatiron_update_power_control(struct cx231xx *dev, AV_MODE avmode);
int cx231xx_flatiron_set_audio_input(struct cx231xx *dev, u8 audio_input);
/* DIF related functions */
int cx231xx_dif_configure_C2HH_for_low_IF(struct cx231xx *dev, u32 mode,
u32 function_mode, u32 standard);
int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard);
int cx231xx_tuner_pre_channel_change(struct cx231xx *dev);
int cx231xx_tuner_post_channel_change(struct cx231xx *dev);
/* video parser functions */
u8 cx231xx_find_next_SAV_EAV(u8 *p_buffer, u32 buffer_size, u32 *p_bytes_used);
u8 cx231xx_find_boundary_SAV_EAV(u8 *p_buffer, u8 *partial_buf, u32 *p_bytes_used);
int cx231xx_do_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_buffer, u32 bytes_to_copy);
void cx231xx_reset_video_buffer(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q);
u8 cx231xx_is_buffer_done(struct cx231xx *dev,struct cx231xx_dmaqueue *dma_q);
u32 cx231xx_copy_video_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 *p_line, u32 length, int field_number);
u32 cx231xx_get_video_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
u8 sav_eav, u8 *p_buffer, u32 buffer_size);
void cx231xx_swab(u16 *from, u16 *to, u16 len);
/* Provided by cx231xx-core.c */
u32 cx231xx_request_buffers(struct cx231xx *dev, u32 count);
void cx231xx_queue_unusedframes(struct cx231xx *dev);
void cx231xx_release_buffers(struct cx231xx *dev);
/* read from control pipe */
int cx231xx_read_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg,
char *buf, int len);
/* write to control pipe */
int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg,
char *buf, int len);
int cx231xx_mode_register(struct cx231xx *dev, u16 address, u32 mode);
int cx231xx_send_vendor_cmd(struct cx231xx *dev, VENDOR_REQUEST_IN *ven_req);
int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus,
struct cx231xx_i2c_xfer_data *req_data);
/* Gpio related functions */
int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8* gpio_val,
u8 len, u8 request, u8 direction);
int cx231xx_set_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8* gpio_val);
int cx231xx_get_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8* gpio_val);
int cx231xx_set_gpio_value(struct cx231xx *dev, int pin_number, int pin_value);
int cx231xx_set_gpio_direction(struct cx231xx *dev, int pin_number, int pin_value);
int cx231xx_gpio_i2c_start(struct cx231xx *dev);
int cx231xx_gpio_i2c_end(struct cx231xx *dev);
int cx231xx_gpio_i2c_write_byte(struct cx231xx *dev, u8 data);
int cx231xx_gpio_i2c_read_byte(struct cx231xx *dev, u8 *buf);
int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev);
int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev);
int cx231xx_gpio_i2c_write_nak(struct cx231xx *dev);
int cx231xx_gpio_i2c_read(struct cx231xx *dev, u8 dev_addr, u8 *buf ,u8 len);
int cx231xx_gpio_i2c_write(struct cx231xx *dev, u8 dev_addr, u8 *buf ,u8 len);
/* audio related functions */
int cx231xx_set_audio_decoder_input(struct cx231xx *dev, enum AUDIO_INPUT audio_input);
int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type);
int cx231xx_resolution_set(struct cx231xx *dev);
int cx231xx_set_video_alternate(struct cx231xx *dev);
int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt);
int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
int num_bufs, int max_pkt_size,
int (*isoc_copy) (struct cx231xx *dev, struct urb *urb));
void cx231xx_uninit_isoc(struct cx231xx *dev);
int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode);
int cx231xx_gpio_set(struct cx231xx *dev, struct cx231xx_reg_seq *gpio);
/* Device list functions */
void cx231xx_release_resources(struct cx231xx *dev);
void cx231xx_release_analog_resources(struct cx231xx *dev);
int cx231xx_register_analog_devices(struct cx231xx *dev);
void cx231xx_remove_from_devlist(struct cx231xx *dev);
void cx231xx_add_into_devlist(struct cx231xx *dev);
struct cx231xx *cx231xx_get_device(int minor,
enum v4l2_buf_type *fh_type, int *has_radio);
void cx231xx_init_extension(struct cx231xx *dev);
void cx231xx_close_extension(struct cx231xx *dev);
/* hardware init functions */
int cx231xx_dev_init(struct cx231xx *dev);
void cx231xx_dev_uninit(struct cx231xx *dev);
void cx231xx_config_i2c(struct cx231xx *dev);
int cx231xx_config(struct cx231xx *dev);
/* Stream control functions */
int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask);
int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask);
int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type);
/* Power control functions */
int cx231xx_set_power_mode(struct cx231xx *dev, AV_MODE mode);
int cx231xx_power_suspend(struct cx231xx *dev);
/* chip specific control functions */
int cx231xx_init_ctrl_pin_status(struct cx231xx *dev);
int cx231xx_set_agc_analog_digital_mux_select(struct cx231xx *dev, u8 analog_or_digital);
int cx231xx_enable_i2c_for_tuner(struct cx231xx *dev, u8 I2CIndex);
/* video audio decoder related functions */
void video_mux(struct cx231xx *dev, int index);
int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input);
int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input);
int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev);
int cx231xx_set_audio_input(struct cx231xx *dev, u8 input);
void get_scale(struct cx231xx *dev,
unsigned int width, unsigned int height,
unsigned int *hscale, unsigned int *vscale);
/* Provided by cx231xx-video.c */
int cx231xx_register_extension(struct cx231xx_ops *dev);
void cx231xx_unregister_extension(struct cx231xx_ops *dev);
void cx231xx_init_extension(struct cx231xx *dev);
void cx231xx_close_extension(struct cx231xx *dev);
/* Provided by cx231xx-cards.c */
extern void cx231xx_pre_card_setup(struct cx231xx *dev);
extern void cx231xx_card_setup(struct cx231xx *dev);
extern struct cx231xx_board cx231xx_boards[];
extern struct usb_device_id cx231xx_id_table[];
extern const unsigned int cx231xx_bcount;
void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir);
int cx231xx_tuner_callback(void *ptr, int component, int command, int arg);
/* Provided by cx231xx-input.c */
int cx231xx_ir_init(struct cx231xx *dev);
int cx231xx_ir_fini(struct cx231xx *dev);
/* printk macros */
#define cx231xx_err(fmt, arg...) do {\
printk(KERN_ERR fmt , ##arg); } while (0)
#define cx231xx_errdev(fmt, arg...) do {\
printk(KERN_ERR "%s: "fmt,\
dev->name , ##arg); } while (0)
#define cx231xx_info(fmt, arg...) do {\
printk(KERN_INFO "%s: "fmt,\
dev->name , ##arg); } while (0)
#define cx231xx_warn(fmt, arg...) do {\
printk(KERN_WARNING "%s: "fmt,\
dev->name , ##arg); } while (0)
static inline unsigned int norm_maxw(struct cx231xx *dev)
{
if (dev->board.max_range_640_480)
return 640;
else
return 720;
}
static inline unsigned int norm_maxh(struct cx231xx *dev)
{
if (dev->board.max_range_640_480)
return 480;
else
return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
}
#endif
...@@ -88,6 +88,7 @@ ...@@ -88,6 +88,7 @@
#define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */
#define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */
#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */
#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */
#define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ #define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */
/* --- SGI adapters */ /* --- SGI adapters */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment