lan78xx: Use default values loaded from EEPROM/OTP after reset

Use default value of auto duplex and auto speed values loaded
from EEPROM/OTP after reset. The LAN78xx allows platform
configurations to be loaded from EEPROM/OTP.
Ex: When external phy is connected, the MAC can be configured to
have correct auto speed, auto duplex, auto polarity configured
from the EEPROM/OTP.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/lan78xx.c

@@ -2449,7 +2449,6 @@ static int lan78xx_reset(struct lan78xx_net *dev)
 	/* LAN7801 only has RGMII mode */
 	if (dev->chipid == ID_REV_CHIP_ID_7801_)
 		buf &= ~MAC_CR_GMII_EN_;
-	buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
 	ret = lan78xx_write_reg(dev, MAC_CR, buf);
 
 	ret = lan78xx_read_reg(dev, MAC_TX, &buf);