Commit e3c68ab1 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'imx-fixes-5.16-2' of...

Merge tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.16, round 2:

- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
  properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
  regression that LCDIF driver stops probe, because interconnect
  provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.

* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: Register SoC device only on i.MX boards
  soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
  ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
  arm64: dts: imx8mq: remove interconnect property from lcdif

Link: https://lore.kernel.org/r/20211211015625.GK4216@dragonSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 7ad1a90a 4ebd29f9
......@@ -82,6 +82,6 @@
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0 0x0200 0x048C 0x0000 0x9 0x0
#endif /* __DTS_IMX6ULL_PINFUNC_H */
......@@ -524,8 +524,6 @@ lcdif: lcd-controller@30320000 {
<&clk IMX8MQ_VIDEO_PLL1>,
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
interconnect-names = "dram";
status = "disabled";
port@0 {
......
......@@ -17,6 +17,7 @@
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
struct imx8m_blk_ctrl_domain;
......@@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
const char *gpc_name;
u32 rst_mask;
u32 clk_mask;
/*
* i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
* which is used to control the reset for the MIPI Phy.
* Since it's only present in certain circumstances,
* an if-statement should be used before setting and clearing this
* register.
*/
u32 mipi_phy_rst_mask;
};
#define DOMAIN_MAX_CLKS 3
......@@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* put devices into reset */
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
if (data->mipi_phy_rst_mask)
regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* enable upstream and blk-ctrl clocks to allow reset to propagate */
ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
......@@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* release reset */
regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
if (data->mipi_phy_rst_mask)
regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* disable upstream clocks */
clk_bulk_disable_unprepare(data->num_clks, domain->clks);
......@@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
struct imx8m_blk_ctrl *bc = domain->bc;
/* put devices into reset and disable clocks */
if (data->mipi_phy_rst_mask)
regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
......@@ -480,6 +497,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-dsi",
.rst_mask = BIT(5),
.clk_mask = BIT(8) | BIT(9),
.mipi_phy_rst_mask = BIT(17),
},
[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
.name = "dispblk-mipi-csi",
......@@ -488,6 +506,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-csi",
.rst_mask = BIT(3) | BIT(4),
.clk_mask = BIT(10) | BIT(11),
.mipi_phy_rst_mask = BIT(16),
},
};
......
......@@ -36,6 +36,10 @@ static int __init imx_soc_device_init(void)
int ret;
int i;
/* Return early if this is running on devices with different SoCs */
if (!__mxc_cpu_type)
return 0;
if (of_machine_is_compatible("fsl,ls1021a"))
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment