Commit e4ac3051 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by James Bottomley

[PATCH] tmscsim: remove legacy and void code

This one is purely cosmetic - it removes legacy (pre 2.4) and some void
(e.g. #defined as nothing locks) code. So, it doesn't affect the resulting
object file.
parent d1fef10e
......@@ -227,7 +227,7 @@ DC390_Interrupt( int irq, void *dev_id, struct pt_regs *regs)
#if DMA_INT
UCHAR dstatus;
#endif
DC390_AFLAGS DC390_IFLAGS; //DC390_DFLAGS
DC390_IFLAGS;
pACB = (PACB)dev_id;
for (pACB2 = dc390_pACB_start; (pACB2 && pACB2 != pACB); pACB2 = pACB2->pNextACB);
......@@ -237,26 +237,21 @@ DC390_Interrupt( int irq, void *dev_id, struct pt_regs *regs)
return IRQ_NONE;
}
//DC390_LOCK_DRV;
sstatus = DC390_read8 (Scsi_Status);
if( !(sstatus & INTERRUPT) )
{ /*DC390_UNLOCK_DRV;*/ return IRQ_NONE; };
return IRQ_NONE;
DEBUG1(printk (KERN_DEBUG "sstatus=%02x,", sstatus));
#if DMA_INT
DC390_LOCK_IO(pACB->pScsiHost);
DC390_LOCK_ACB;
dstatus = dc390_dma_intr (pACB);
DC390_UNLOCK_ACB;
DC390_UNLOCK_IO(pACB->pScsiHost);
DEBUG1(printk (KERN_DEBUG "dstatus=%02x,", dstatus));
if (! (dstatus & SCSI_INTERRUPT))
{
DEBUG0(printk (KERN_WARNING "DC390 Int w/o SCSI actions (only DMA?)\n"));
//DC390_UNLOCK_DRV;
return IRQ_NONE;
};
#else
......@@ -266,8 +261,6 @@ DC390_Interrupt( int irq, void *dev_id, struct pt_regs *regs)
#endif
DC390_LOCK_IO(pACB->pScsiHost);
DC390_LOCK_ACB;
//DC390_UNLOCK_DRV_NI; /* Allow _other_ CPUs to process IRQ (useful for shared IRQs) */
istate = DC390_read8 (Intern_State);
istatus = DC390_read8 (INT_Status); /* This clears Scsi_Status, Intern_State and INT_Status ! */
......@@ -339,10 +332,7 @@ DC390_Interrupt( int irq, void *dev_id, struct pt_regs *regs)
}
unlock:
//DC390_LOCK_DRV_NI;
DC390_UNLOCK_ACB;
DC390_UNLOCK_IO(pACB->pScsiHost);
//DC390_UNLOCK_DRV; /* Restore initial flags */
return IRQ_HANDLED;
}
......@@ -1620,18 +1610,14 @@ dc390_SRBdone( PACB pACB, PDCB pDCB, PSRB pSRB )
pACB->scan_devices = 0;
};
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,30)
pcmd->resid = pcmd->request_bufflen - pSRB->TotalXferredLen;
#endif
if (!DCB_removed) dc390_Going_remove (pDCB, pSRB);
/* Add to free list */
dc390_Free_insert (pACB, pSRB);
DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->pid));
DC390_UNLOCK_ACB_NI;
pcmd->scsi_done (pcmd);
DC390_LOCK_ACB_NI;
dc390_Waiting_process (pACB);
return;
......@@ -1668,9 +1654,7 @@ dc390_DoingSRB_Done( PACB pACB, PSCSICMD cmd )
/* ReleaseSRB( pDCB, pSRB ); */
DEBUG0(printk (KERN_DEBUG "DC390: DoingSRB_Done: done pid %li\n", pcmd->pid));
DC390_UNLOCK_ACB_NI;
pcmd->scsi_done( pcmd );
DC390_LOCK_ACB_NI;
#endif
psrb = psrb2;
}
......
......@@ -264,16 +264,10 @@
* undef : traditional save_flags; cli; restore_flags;
*/
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,30)
# include <linux/init.h>
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,30)
# include <linux/spinlock.h>
#else
# include <asm/spinlock.h>
#endif
#endif
#include <linux/init.h>
#include <linux/spinlock.h>
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,99) && defined(MODULE)
#if defined(MODULE)
static struct pci_device_id tmscsim_pci_tbl[] = {
{
.vendor = PCI_VENDOR_ID_AMD,
......@@ -287,9 +281,7 @@ MODULE_DEVICE_TABLE(pci, tmscsim_pci_tbl);
#endif
#define USE_SPINLOCKS 1
#define NEW_PCI 1
#define DC390_AFLAGS
#define DC390_IFLAGS unsigned long iflags
#define DC390_DFLAGS unsigned long dflags
spinlock_t dc390_drvlock = SPIN_LOCK_UNLOCKED;
......@@ -299,11 +291,6 @@ spinlock_t dc390_drvlock = SPIN_LOCK_UNLOCKED;
#define DC390_UNLOCK_DRV spin_unlock_irqrestore (&dc390_drvlock, dflags)
#define DC390_LOCK_DRV_NI spin_lock (&dc390_drvlock)
#define DC390_UNLOCK_DRV_NI spin_unlock (&dc390_drvlock)
#define DC390_LOCK_ACB /* DC390_LOCK_IO */
#define DC390_UNLOCK_ACB /* DC390_UNLOCK_IO */
#define DC390_LOCK_ACB_NI /* spin_lock (&(pACB->lock)) */
#define DC390_UNLOCK_ACB_NI /* spin_unlock (&(pACB->lock)) */
#define DC390_LOCKA_INIT /* DC390_LOCKA_INIT */
/* These macros are used for uniform access to 2.0.x and 2.1.x PCI config space*/
......@@ -365,10 +352,6 @@ void dc390_updateDCB (PACB pACB, PDCB pDCB);
static int DC390_release(struct Scsi_Host *host);
static int dc390_shutdown (struct Scsi_Host *host);
//static PSHT dc390_pSHT_start = NULL;
//static PSH dc390_pSH_start = NULL;
//static PSH dc390_pSH_current = NULL;
static PACB dc390_pACB_start= NULL;
static PACB dc390_pACB_current = NULL;
static ULONG dc390_lastabortedpid = 0;
......@@ -378,12 +361,9 @@ static UCHAR dc390_adapterCnt = 0;
/* Startup values, to be overriden on the commandline */
int tmscsim[] = {-2, -2, -2, -2, -2, -2};
# if defined(MODULE) && LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,30)
#if defined(MODULE)
MODULE_PARM(tmscsim, "1-6i");
MODULE_PARM_DESC(tmscsim, "Host SCSI ID, Speed (0=10MHz), Device Flags, Adapter Flags, Max Tags (log2(tags)-1), DelayReset (s)");
# endif
#if defined(MODULE) && LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,30)
MODULE_AUTHOR("C.L. Huang / Kurt Garloff");
MODULE_DESCRIPTION("SCSI host adapter driver for Tekram DC390 and other AMD53C974A based PCI SCSI adapters");
MODULE_LICENSE("GPL");
......@@ -452,13 +432,6 @@ UCHAR dc390_eepromBuf[MAX_ADAPTER_NUM][EE_LEN];
UCHAR dc390_clock_period1[] = {4, 5, 6, 7, 8, 10, 13, 20};
UCHAR dc390_clock_speed[] = {100,80,67,57,50, 40, 31, 20};
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,30)
struct proc_dir_entry DC390_proc_scsi_tmscsim ={
PROC_SCSI_DC390T, 7 ,"tmscsim",
S_IFDIR | S_IRUGO | S_IXUGO, 2
};
#endif
/***********************************************************************
* Functions for access to DC390 EEPROM
* and some to emulate it
......@@ -553,7 +526,6 @@ static void __init dc390_fill_with_defaults (void)
/* Override defaults on cmdline:
* tmscsim: AdaptID, MaxSpeed (Index), DevMode (Bitmapped), AdaptMode (Bitmapped)
*/
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,13)
int __init dc390_setup (char *str)
{
int ints[8];
......@@ -574,24 +546,6 @@ int __init dc390_setup (char *str)
__setup("tmscsim=", dc390_setup);
#endif
#else
void __init dc390_setup (char *str, int *ints)
{
int i, im;
im = ints[0];
if (im > 6)
{
printk (KERN_NOTICE "DC390: ignore extra params!\n");
im = 6;
}
for (i = 0; i < im; i++)
tmscsim[i] = ints[i+1];
/* dc390_checkparams (); */
}
#endif
static void __init dc390_EEpromOutDI( PDEVDECL, PUCHAR regval, UCHAR Carry )
{
UCHAR bval;
......@@ -864,16 +818,6 @@ static __inline__ void dc390_Waiting_to_Going ( PDCB pDCB, PSRB pSRB )
dc390_Going_append (pDCB, pSRB);
}
/* 2.0 timer compatibility */
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,1,30)
static inline int timer_pending(struct timer_list * timer)
{
return timer->prev != NULL;
}
#define time_after(a,b) ((long)(b) - (long)(a) < 0)
#define time_before(a,b) time_after(b,a)
#endif
void DC390_waiting_timed_out (unsigned long ptr);
/* Sets the timer to wake us up */
static void dc390_waiting_timer (PACB pACB, unsigned long to)
......@@ -931,12 +875,9 @@ void DC390_waiting_timed_out (unsigned long ptr)
{
PACB pACB = (PACB)ptr;
DC390_IFLAGS;
DC390_AFLAGS;
DEBUG0(printk ("DC390: Debug: Waiting queue woken up by timer!\n"));
DC390_LOCK_IO(pACB->pScsiHost);
DC390_LOCK_ACB;
dc390_Waiting_process (pACB);
DC390_UNLOCK_ACB;
DC390_UNLOCK_IO(pACB->pScsiHost);
}
......@@ -1110,15 +1051,11 @@ int DC390_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *))
PDCB pDCB;
PSRB pSRB;
PACB pACB = (PACB) cmd->device->host->hostdata;
DC390_AFLAGS;
DEBUG0(/* if(pACB->scan_devices) */ \
printk(KERN_INFO "DC390: Queue Cmd=%02x,Tgt=%d,LUN=%d (pid=%li), buffer=%p\n",\
cmd->cmnd[0],cmd->device->id,cmd->device->lun,cmd->pid, cmd->buffer));
DC390_LOCK_ACB;
/* TODO: Change the policy: Always accept TEST_UNIT_READY or INQUIRY
* commands and alloc a DCB for the device if not yet there. DCB will
* be removed in dc390_SRBdone if SEL_TIMEOUT */
......@@ -1175,15 +1112,12 @@ int DC390_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *))
} else
dc390_SendSRB(pACB, pSRB);
DC390_UNLOCK_ACB;
DEBUG1(printk (KERN_DEBUG " ... command (pid %li) queued successfully.\n", cmd->pid));
return(0);
requeue:
DC390_UNLOCK_ACB;
return 1;
fail:
DC390_UNLOCK_ACB;
cmd->result = DID_BAD_TARGET << 16;
done(cmd);
return 0;
......@@ -1386,9 +1320,6 @@ int DC390_abort (Scsi_Cmnd *cmd)
int status;
//ULONG sbac;
PACB pACB = (PACB) cmd->device->host->hostdata;
DC390_AFLAGS;
DC390_LOCK_ACB;
printk ("DC390: Abort command (pid %li, Device %02i-%02i)\n",
cmd->pid, cmd->device->id, cmd->device->lun);
......@@ -1505,7 +1436,6 @@ int DC390_abort (Scsi_Cmnd *cmd)
}
#endif
dc390_lastabortedpid = cmd->pid;
DC390_UNLOCK_ACB;
//do_DC390_Interrupt (pACB->IRQLevel, 0, 0);
#ifndef USE_NEW_EH
if (status == SCSI_ABORT_SUCCESS) cmd->scsi_done(cmd);
......@@ -1592,11 +1522,9 @@ int DC390_reset (Scsi_Cmnd *cmd)
{
UCHAR bval;
PACB pACB = (PACB) cmd->device->host->hostdata;
DC390_AFLAGS;
printk(KERN_INFO "DC390: RESET ... ");
DC390_LOCK_ACB;
if (timer_pending (&pACB->Waiting_Timer)) del_timer (&pACB->Waiting_Timer);
bval = DC390_read8 (CtrlReg1);
bval |= DIS_INT_ON_SCSI_RST;
......@@ -1625,7 +1553,6 @@ int DC390_reset (Scsi_Cmnd *cmd)
dc390_Waiting_process( pACB );
printk("done\n");
DC390_UNLOCK_ACB;
return( SCSI_RESET_SUCCESS );
}
......@@ -1792,7 +1719,6 @@ void __init dc390_initACB (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index)
{
PACB pACB;
UCHAR i;
DC390_AFLAGS;
psh->can_queue = MAX_CMD_QUEUE;
psh->cmd_per_lun = MAX_CMD_PER_LUN;
......@@ -1800,11 +1726,7 @@ void __init dc390_initACB (PSH psh, ULONG io_port, UCHAR Irq, UCHAR index)
psh->io_port = io_port;
psh->n_io_port = 0x80;
psh->irq = Irq;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,50)
psh->base = io_port;
#else
psh->base = (char*)io_port;
#endif
psh->unique_id = io_port;
psh->dma_channel = -1;
psh->last_reset = jiffies;
......@@ -1958,8 +1880,7 @@ static int __init DC390_init (PSHT psht, ULONG io_port, UCHAR Irq, PDEVDECL, UCH
{
PSH psh;
PACB pACB;
DC390_AFLAGS;
if (dc390_CheckEEpromCheckSum (PDEV, index))
{
int speed;
......@@ -1985,21 +1906,6 @@ static int __init DC390_init (PSHT psht, ULONG io_port, UCHAR Irq, PDEVDECL, UCH
scsi_set_device(psh, &pdev->dev);
pACB = (PACB) psh->hostdata;
DC390_LOCKA_INIT;
DC390_LOCK_ACB;
#if 0
if( !dc390_pSH_start )
{
dc390_pSH_start = psh;
dc390_pSH_current = psh;
}
else
{
dc390_pSH_current->next = psh;
dc390_pSH_current = psh;
}
#endif
DEBUG0(printk(KERN_INFO "DC390: pSH = %8x, Index %02i\n", (UINT) psh, index));
......@@ -2013,59 +1919,15 @@ static int __init DC390_init (PSHT psht, ULONG io_port, UCHAR Irq, PDEVDECL, UCH
(UINT) pACB, (UINT) pACB->DCBmap, (UINT) pACB->SRB_array));
DEBUG0(printk("DC390: ACB size= %4x, DCB size= %4x, SRB size= %4x\n",\
sizeof(DC390_ACB), sizeof(DC390_DCB), sizeof(DC390_SRB) ));
DC390_UNLOCK_ACB;
return (0);
}
else
{
//dc390_pSH_start = NULL;
scsi_unregister( psh );
DC390_UNLOCK_ACB;
return( -1 );
}
}
/***********************************************************************
* Function : int DC390_detect(Scsi_Host_Template *psht)
*
* Purpose : detects and initializes AMD53C974 SCSI chips
* that were autoprobed, overridden on the LILO command line,
* or specified at compile time.
*
* Inputs : psht - template for this SCSI adapter
*
* Returns : number of host adapters detected
*
***********************************************************************/
#ifndef NEW_PCI
/* Acc. to PCI 2.1 spec it's up to the driver to enable Bus mastering:
* We use pci_set_master () for 2.1.x and this func for 2.0.x: */
static void __init dc390_set_master (PDEVDECL)
{
USHORT cmd;
UCHAR lat;
PCI_READ_CONFIG_WORD (PDEV, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_MASTER)) {
printk("PCI: Enabling bus mastering for device %02x:%02x\n",
PCI_BUS_DEV);
cmd |= PCI_COMMAND_MASTER;
PCI_WRITE_CONFIG_WORD(PDEV, PCI_COMMAND, cmd);
}
PCI_READ_CONFIG_BYTE (PDEV, PCI_LATENCY_TIMER, &lat);
if (lat < 16 /* || lat == 255 */) {
printk("PCI: Setting latency timer of device %02x:%02x from %i to 64\n",
PCI_BUS_DEV, lat);
PCI_WRITE_CONFIG_BYTE(PDEV, PCI_LATENCY_TIMER, 64);
}
}
#endif /* ! NEW_PCI */
static void __init dc390_set_pci_cfg (PDEVDECL)
{
USHORT cmd;
......@@ -2074,7 +1936,6 @@ static void __init dc390_set_pci_cfg (PDEVDECL)
PCI_WRITE_CONFIG_WORD (PDEV, PCI_COMMAND, cmd);
PCI_WRITE_CONFIG_WORD (PDEV, PCI_STATUS, (PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY));
}
int __init DC390_detect (Scsi_Host_Template *psht)
{
......@@ -2082,7 +1943,6 @@ int __init DC390_detect (Scsi_Host_Template *psht)
UCHAR irq;
ULONG io_port;
//dc390_pSHT_start = psht;
dc390_pACB_start = NULL;
if ( PCI_PRESENT )
......@@ -2109,11 +1969,8 @@ int __init DC390_detect (Scsi_Host_Template *psht)
printk (KERN_ERR "DC390: No PCI BIOS found!\n");
if (dc390_adapterCnt)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,30)
psht->proc_name = "tmscsim";
#else
psht->proc_dir = &DC390_proc_scsi_tmscsim;
#endif
printk(KERN_INFO "DC390: %i adapters found\n", dc390_adapterCnt);
return( dc390_adapterCnt );
}
......@@ -2152,7 +2009,6 @@ int DC390_proc_info (struct Scsi_Host *shpnt, char *buffer, char **start,
char *pos = buffer;
PACB pACB;
PDCB pDCB;
DC390_AFLAGS;
pACB = dc390_pACB_start;
......@@ -2171,8 +2027,6 @@ int DC390_proc_info (struct Scsi_Host *shpnt, char *buffer, char **start,
SPRINTF("Tekram DC390/AM53C974 PCI SCSI Host Adapter, ");
SPRINTF("Driver Version %s\n", DC390_VERSION);
DC390_LOCK_ACB;
SPRINTF("SCSI Host Nr %i, ", shpnt->host_no);
SPRINTF("%s Adapter Nr %i\n", dc390_adapname, pACB->AdapterIndex);
SPRINTF("IOPortBase 0x%04x, ", pACB->IOPortBase);
......@@ -2254,8 +2108,6 @@ int DC390_proc_info (struct Scsi_Host *shpnt, char *buffer, char **start,
SPRINTF("\n");
#endif
DC390_UNLOCK_ACB;
*start = buffer + offset;
if (pos - buffer < offset)
......@@ -2318,11 +2170,10 @@ void dc390_freeDCBs (struct Scsi_Host *host)
int DC390_release (struct Scsi_Host *host)
{
DC390_AFLAGS DC390_IFLAGS;
DC390_IFLAGS;
PACB pACB = (PACB)(host->hostdata);
DC390_LOCK_IO(host);
DC390_LOCK_ACB;
/* TO DO: We should check for outstanding commands first. */
dc390_shutdown (host);
......@@ -2335,7 +2186,6 @@ int DC390_release (struct Scsi_Host *host)
release_region(host->io_port,host->n_io_port);
dc390_freeDCBs (host);
DC390_UNLOCK_ACB;
DC390_UNLOCK_IO(host);
scsi_unregister(host);
return( 1 );
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment